5 files changed, 39 insertions, 34 deletions

diff --git a/tests/i2c-master/README.md b/tests/i2c-master/README.md
index 74acefb..1eb832f 100644
--- a/tests/i2c-master/README.md
+++ b/tests/i2c-master/README.md
@@ -8,10 +8,19 @@ Instead, use a known I2C peripheral on all boards, and require/expect
 a known fixed i2c slave device.  (Eventually, this will be a soft
 controllable i2c slave in the auto test setup ;)
 
+the "trigger" pin is bounced when each iteration of the test code starts,
+allowing synchronization with a sigrok script that helps assure that
+results are as expected.
+
 Debug is via SWO wherever possible, PA2 (tx only) on less capable cores
 
-Pinouts:
+Pinouts: (External PullUps REQUIRED!)
+
+board		SCLK	SDA	i2cperiph	trigger
+f4-disco	PB8	PB9	i2c1		PB13
 
-board		SCLK	SDA
-f4-disco	PB8	PB9	i2c1
 
+Notes for monitoring with sigrok:
+$ sigrok-cli -d fx2lafw -C D0=SDA,D1=SCL,D2=Trig -c samplerate=4Mhz:captureratio=4 --time=150ms  -t Trig=r -o cap2.cli.sr
+# Then open the .sr file in pulseview.  something's wrong with decoding
+# directly from the cli!
diff --git a/tests/i2c-master/hw.h b/tests/i2c-master/hw.h
index 7ce9c50..34aef32 100644
--- a/tests/i2c-master/hw.h
+++ b/tests/i2c-master/hw.h
@@ -15,6 +15,9 @@ struct hw_detail
        uint32_t pins; /* eg: GPIO8 | GPIO9 */ /* ASSUMES SAME PORT*/
        uint32_t port; /* eg GPIOB */
        uint32_t port_rcc; /* eg RCC_GPIOB */
+       uint32_t trigger_rcc;
+       uint32_t trigger_port;
+       uint32_t trigger_pin;
 };
 
 extern struct hw_detail hw_details;
diff --git a/tests/i2c-master/i2c-master.c b/tests/i2c-master/i2c-master.c
index 2c8e604..50beda8 100644
--- a/tests/i2c-master/i2c-master.c
+++ b/tests/i2c-master/i2c-master.c
@@ -6,6 +6,7 @@
 #include <stdint.h>
 #include <stdio.h>
 #include <libopencm3/stm32/i2c.h>
+#include <libopencm3/stm32/gpio.h>
 #include <libopencm3/stm32/rcc.h>
 #include "trace.h"
 #include "hw.h"
@@ -33,6 +34,7 @@ void i2cm_init(void)
 	//i2c_set_dutycycle(hw_details.periph, I2C_CCR_DUTY_DIV2); /* default, no need to do this really */
 
 	/* --------- board specific settings!  */
+	// TODO - rcc_apb2_clock / 1000000 and rounded somehow nicely?
 	i2c_set_clock_frequency(hw_details.periph, I2C_CR2_FREQ_42MHZ);
 	/* 42MHz / (100kHz * 2) */
 	i2c_set_ccr(hw_details.periph, 210);
@@ -174,7 +176,7 @@ static float sht21_read_humi_hold(uint32_t i2c)
 static void sht21_readid(void)
 {
 	sht21_send_cmd(I2C1, SHT21_CMD_READ_REG);
-	uint8_t raw;
+	uint8_t raw = 0;
 	sht21_readn(I2C1, 1, &raw);
 	printf("raw user reg = %#x\n", raw);
 	int resolution = ((raw & 0x80) >> 6) | (raw & 1);
@@ -196,9 +198,11 @@ static void sht21_readid(void)
 
 void i2cm_task(void)
 {
+	gpio_set(hw_details.trigger_port, hw_details.trigger_pin);
 	sht21_readid();
 	float temp = sht21_read_temp_hold(I2C1);
 	float humi = sht21_read_humi_hold(I2C1);
+	gpio_clear(hw_details.trigger_port, hw_details.trigger_pin);
 	printf("Temp: %f C, RH: %f\n", temp, humi);
 
 }
\ No newline at end of file
diff --git a/tests/i2c-master/i2c-master.h b/tests/i2c-master/i2c-master.h
index 340dc39..7a44b66 100644
--- a/tests/i2c-master/i2c-master.h
+++ b/tests/i2c-master/i2c-master.h
@@ -1,14 +1,6 @@
 /*
- * To change this license header, choose License Headers in Project Properties.
- * To change this template file, choose Tools | Templates
- * and open the template in the editor.
- */
-
-/* 
- * File:   i2c-master.h
- * Author: karlp
- *
- * Created on February 21, 2017, 10:59 PM
+ * common i2c master code headers.
+ * Karl Palsson <karlp@tweak.net.au>
  */
 
 #pragma once
diff --git a/tests/i2c-master/main-stm32f4-disco.c b/tests/i2c-master/main-stm32f4-disco.c
index 1e30791..605872f 100644
--- a/tests/i2c-master/main-stm32f4-disco.c
+++ b/tests/i2c-master/main-stm32f4-disco.c
@@ -23,18 +23,25 @@ struct hw_detail hw_details = {
 	.periph = I2C1,
 	.periph_rcc = RCC_I2C1,
 	.periph_rst = RST_I2C1,
-//	.pins = GPIO6 | GPIO9, /* FIXME - only for onboard! */
-	.pins = GPIO8 | GPIO9, /* For SHT21 on I2c1 */
+	.pins = GPIO8 | GPIO9, /* our external i2c device on I2c1 */
 	.port = GPIOB,
 	.port_rcc = RCC_GPIOB,
+	.trigger_rcc = RCC_GPIOB,
+	.trigger_port = GPIOB,
+	.trigger_pin = GPIO13,
 };
 
 
-static void setup_i2c_gpio(void)
+/* provided in board files please*/
+/**
+ * Setup any gpios or anything hardware specific.
+ * Should _only_ be things that can't be done in shared i2cm_init!
+ */
+static void i2cm_hw_init(void)
 {
-	/* reset pin */
-//	rcc_periph_clock_enable(RCC_GPIOD);
-//	gpio_mode_setup(GPIOD, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, GPIO4);
+	/* trigger pin gpio */
+	rcc_periph_clock_enable(hw_details.trigger_rcc);
+	gpio_mode_setup(hw_details.trigger_port, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, hw_details.trigger_pin);
 
 	/* i2c control lines */
 	rcc_periph_clock_enable(hw_details.port_rcc);
@@ -43,19 +50,10 @@ static void setup_i2c_gpio(void)
 	gpio_set_af(hw_details.port, GPIO_AF4, hw_details.pins);
 }
 
-static void codec_init(void)
+static void setup(void)
 {
-	int i;
-	/* Configure the Codec related IOs */
-	setup_i2c_gpio();
-
-	/* reset the codec */
-//	gpio_clear(GPIOD, GPIO4);
-	for (i = 0; i < 1000000; i++) { /* Wait a bit. */
-		__asm__("NOP");
-	}
-//	gpio_set(GPIOD, GPIO4);
-
+	printf("hi guys!\n");
+	i2cm_hw_init();
 	i2cm_init();
 }
 
@@ -68,8 +66,7 @@ int main(void)
 	rcc_periph_clock_enable(RCC_GPIOD);
 	gpio_mode_setup(LED_DISCO_GREEN_PORT, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE,
 		LED_DISCO_GREEN_PIN);
-	printf("hi guys!\n");
-	codec_init();
+	setup();
 
 	while (1) {
 		i2cm_task();