1 files changed, 0 insertions, 110 deletions
diff --git a/hardware/enclosure/olsndot_base.scad b/hardware/enclosure/olsndot_base.scad
deleted file mode 100644
index 2cea8b2..0000000
--- a/hardware/enclosure/olsndot_base.scad
+++ /dev/null
@@ -1,110 +0,0 @@
-
-/* A small, arbitrary unit to guard against rounding errors */
-eps = 0.1;
-alot = 1000;
-
-/* Base PCB size */
-pcb_width = 90;
-pcb_height = 50;
-
-bottom_thickness = 1.5;
-
-screw_base_dia = 8;
-screw_base_h = 5;
-screw_nut_dia = 5.4;
-screw_nut_h = 6;
-screw_hole_dia = 3.5;
-screw_hole_h = 6;
-
-module rounded_rect(w, h, r) {
-    hull(){
-        translate([w/2-r, h/2-r]) circle(r);
-        translate([-(w/2-r), h/2-r]) circle(r);
-        translate([w/2-r, -(h/2-r)]) circle(r);
-        translate([-(w/2-r), -(h/2-r)]) circle(r);
-    }
-}
-
-module single_screw_base() {
-    translate([0, 0, bottom_thickness-eps]) linear_extrude(height=screw_base_h+eps) {
-        circle(d=screw_base_dia);
-        translate([-screw_base_dia/2, 0]) square([alot, alot]);
-        translate([0, -screw_base_dia/2]) square([alot, alot]);
-    }
-}
-
-w = pcb_width+10;
-h = pcb_height;
-l = 10;
-r = 10;
-t = 5;
-b = 5;
-s1_pos = [ w/2-l,  h/2-b];
-s2_pos = [-w/2+r, -h/2+t];
-s3_pos = [ w/2-l, -h/2+t];
-s4_pos = [-w/2+r,  h/2-b];
-module screw_bases() {
-    intersection() {
-        union() {
-            translate(s1_pos) single_screw_base();
-            translate(s2_pos) mirror([1,1,0]) single_screw_base();
-            translate(s3_pos) mirror([0,1,0]) single_screw_base();
-            translate(s4_pos) mirror([1,0,0]) single_screw_base();
-        }
-        cube([w+eps, h+eps, alot], center=true);
-    }
-}
-
-
-module single_screw_hole() {
-    translate([0, 0, bottom_thickness+screw_base_h+eps])
-    mirror([0,0,1])
-    union() {
-        cylinder(h=screw_nut_h+eps, d=screw_nut_dia);
-        cylinder(h=screw_hole_h+eps, d=screw_hole_dia);
-    }
-}
-
-module screw_holes() {
-    translate(s1_pos) single_screw_hole();
-    translate(s2_pos) mirror([1,1,0]) single_screw_hole();
-    translate(s3_pos) mirror([0,1,0]) single_screw_hole();
-    translate(s4_pos) mirror([1,0,0]) single_screw_hole();
-}
-
-tab_w = 20;
-tab_h = 30;
-tab_thickness = 3;
-tab_hole_d = 9;
-module screw_tab() {
-    difference() {
-        translate([-tab_h/2, -eps, 0]) cube([tab_h, tab_w+eps, tab_thickness]);
-        rotate([0, 0, -50]) translate([-alot/2, tab_h*0.6, -eps]) cube([alot, alot, tab_h+2*eps]);
-        rotate([0, 0, 50]) translate([-alot/2, tab_h*0.6, -eps]) cube([alot, alot, tab_thickness+2*eps]);
-        translate([0, tab_w/2, -eps]) cylinder(d=tab_hole_d, h=tab_thickness+eps*2);
-    }
-}
-
-wall_height = bottom_thickness + 3;
-wall_thickness = 1.5;
-
-cutout_w = 25;
-cutout_h = 70;
-
-module carrier() {
-    union() {
-        difference() {
-            translate([0, 0, wall_height/2]) cube([w, h, wall_height], center=true);
-            translate([0, 0, bottom_thickness + alot/2]) cube([w-wall_thickness*2+eps, h-wall_thickness*2+eps, alot], center=true);
-            cube([cutout_h, cutout_w, alot], center=true);
-        }
-        difference() {
-            screw_bases();
-            screw_holes();
-        }
-        translate([0, h/2, 0]) screw_tab();
-        mirror([0,1,0]) translate([0, h/2, 0]) screw_tab();
-    }
-}
-
-carrier($fn=25);
-\ No newline at end of file