summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--olsndot/PCB_Project/bom.odsbin0 -> 24867 bytes
-rw-r--r--olsndot/firmware/Makefile47
-rw-r--r--olsndot/firmware/gen_cmsis_exports.py30
-rw-r--r--olsndot/firmware/main.c229
-rw-r--r--olsndot/firmware/openocd.cfg10
-rw-r--r--olsndot/firmware/startup_stm32f030x6.s273
-rw-r--r--olsndot/firmware/stm32_flash.ld124
-rw-r--r--olsndot/firmware/system_stm32f0xx.c336
8 files changed, 1049 insertions, 0 deletions
diff --git a/olsndot/PCB_Project/bom.ods b/olsndot/PCB_Project/bom.ods
new file mode 100644
index 0000000..69c5fe4
--- /dev/null
+++ b/olsndot/PCB_Project/bom.ods
Binary files differ
diff --git a/olsndot/firmware/Makefile b/olsndot/firmware/Makefile
new file mode 100644
index 0000000..625865d
--- /dev/null
+++ b/olsndot/firmware/Makefile
@@ -0,0 +1,47 @@
+# put your *.o targets here, make should handle the rest!
+CMSIS_PATH ?= STM32Cube/Drivers/CMSIS
+CMSIS_DEV_PATH ?= $(CMSIS_PATH)/Device/ST/STM32F0xx
+HAL_PATH ?= STM32Cube/Drivers/STM32F0xx_HAL_Driver
+
+CC := arm-none-eabi-gcc
+OBJCOPY := arm-none-eabi-objcopy
+OBJDUMP := arm-none-eabi-objdump
+SIZE := arm-none-eabi-size
+
+CFLAGS = -Wall -g -std=gnu11 -Os
+CFLAGS += -mlittle-endian -mcpu=cortex-m0 -march=armv6-m -mthumb
+CFLAGS += -ffunction-sections -fdata-sections -Wl,--gc-sections
+CFLAGS += -Wl,-Map=main.map
+
+# Technically we're using an STM32F030F4, but apart from the TSSOP20 package that one is largely identical to the
+# STM32F030*6 and there is no separate device header provided for it, so we're faking a *6 device here. This is
+# even documented in stm32f0xx.h. Thanks ST!
+CFLAGS += -DSTM32F030x6 -DHSE_VALUE=16000000
+
+CFLAGS += -Tstm32_flash.ld
+CFLAGS += -I$(CMSIS_DEV_PATH)/Include -I$(CMSIS_PATH)/Include -I$(HAL_PATH)/Inc -Iconfig
+CFLAGS += -L$(CMSIS_PATH)/Lib/GCC -larm_cortexM0l_math
+
+###################################################
+
+.PHONY: program clean
+
+all: main.elf
+
+cmsis_exports.c: $(CMSIS_DEV_PATH)/Include/stm32f030x6.h $(CMSIS_PATH)/Include/core_cm0.h
+ python3 gen_cmsis_exports.py $^ > $@
+
+main.elf: main.c startup_stm32f030x6.s system_stm32f0xx.c $(HAL_PATH)/Src/stm32f0xx_ll_utils.c
+ $(CC) $(CFLAGS) -o $@ $^
+ $(OBJCOPY) -O ihex $@ $(@:.elf=.hex)
+ $(OBJCOPY) -O binary $@ $(@:.elf=.bin)
+ $(OBJDUMP) -St $@ >$(@:.elf=.lst)
+ $(SIZE) $@
+
+program: main.elf openocd.cfg
+ openocd -f openocd.cfg -c "program $< verify reset exit"
+
+clean:
+ rm -f *.o
+ rm -f main.elf main.hex main.bin main.map main.lst
+
diff --git a/olsndot/firmware/gen_cmsis_exports.py b/olsndot/firmware/gen_cmsis_exports.py
new file mode 100644
index 0000000..ba3422b
--- /dev/null
+++ b/olsndot/firmware/gen_cmsis_exports.py
@@ -0,0 +1,30 @@
+#!/usr/bin/env python3
+import re
+import os
+
+if __name__ == '__main__':
+ import argparse
+
+ parser = argparse.ArgumentParser()
+ parser.add_argument('cmsis_device_header', nargs='+', type=argparse.FileType('rb'))
+ args = parser.parse_args()
+
+ print('#ifndef __GENERATED_CMSIS_HEADER_EXPORTS__')
+ print('#define __GENERATED_CMSIS_HEADER_EXPORTS__')
+ print()
+ for header in args.cmsis_device_header:
+ lines = header.readlines()
+ name = os.path.basename(header.name)
+ print('#include <{}>'.format(name))
+ print()
+
+ print('/* {} */'.format(name))
+ for l in lines:
+ match = re.match(b'^#define (\w+)\s+\W*(\w+_TypeDef|\w+_Type).*$', l)
+ if match:
+ inst, typedef = match.groups()
+ inst, typedef = inst.decode(), typedef.decode()
+ print('{} *{} = {};'.format(typedef, inst.lower(), inst))
+ print()
+ print('#endif//__GENERATED_CMSIS_HEADER_EXPORTS__')
+
diff --git a/olsndot/firmware/main.c b/olsndot/firmware/main.c
new file mode 100644
index 0000000..1b3e054
--- /dev/null
+++ b/olsndot/firmware/main.c
@@ -0,0 +1,229 @@
+
+#include <stm32f0xx.h>
+#include <stdint.h>
+#include <system_stm32f0xx.h>
+#include <stm32f0xx_ll_utils.h>
+#include <math.h>
+/*
+ * Part number: STM32F030F4C6
+ */
+
+#define NBITS 12
+void do_transpose(void);
+uint32_t brightness[32];
+volatile uint32_t brightness_by_bit[NBITS];
+
+void hsv_set(int idx, int hue, int white) {
+ int i = hue>>NBITS;
+ int j = hue & (~(-1<<NBITS));
+ int r=0, g=0, b=0;
+ switch (i) {
+ case 0:
+ r = (1<<NBITS)-1;
+ g = 0;
+ b = j;
+ break;
+ case 1:
+ r = (1<<NBITS)-1-j;
+ g = 0;
+ b = (1<<NBITS)-1;
+ break;
+ case 2:
+ r = 0;
+ g = j;
+ b = (1<<NBITS)-1;
+ break;
+ case 3:
+ r = 0;
+ g = (1<<NBITS)-1;
+ b = (1<<NBITS)-1-j;
+ break;
+ case 4:
+ r = j;
+ g = (1<<NBITS)-1;
+ b = 0;
+ break;
+ case 5:
+ r = (1<<NBITS)-1;
+ g = (1<<NBITS)-1-j;
+ b = 0;
+ break;
+ }
+ brightness[idx*4 + 0] = white;
+ brightness[idx*4 + 1] = r;
+ brightness[idx*4 + 2] = g;
+ brightness[idx*4 + 3] = b;
+}
+
+int hue;
+int main(void) {
+ RCC->CR |= RCC_CR_HSEON;
+ while (!(RCC->CR&RCC_CR_HSERDY));
+ RCC->CFGR &= ~RCC_CFGR_PLLMUL_Msk & ~RCC_CFGR_SW_Msk & ~RCC_CFGR_PPRE_Msk & ~RCC_CFGR_HPRE_Msk;
+ RCC->CFGR |= (2<<RCC_CFGR_PLLMUL_Pos) | RCC_CFGR_PLLSRC_HSE_PREDIV; /* PLL x4 -> 50.0MHz */
+ RCC->CFGR2 &= ~RCC_CFGR2_PREDIV_Msk;
+ RCC->CFGR2 |= RCC_CFGR2_PREDIV_DIV2; /* prediv :2 -> 12.5MHz */
+ RCC->CR |= RCC_CR_PLLON;
+ while (!(RCC->CR&RCC_CR_PLLRDY));
+ RCC->CFGR |= (2<<RCC_CFGR_SW_Pos);
+ SystemCoreClockUpdate();
+
+
+
+ RCC->AHBENR |= RCC_AHBENR_GPIOAEN | RCC_AHBENR_GPIOBEN;
+ RCC->APB2ENR |= RCC_APB2ENR_SPI1EN | RCC_APB2ENR_TIM1EN | RCC_APB2ENR_USART1EN | RCC_APB2ENR_ADCEN;
+
+ GPIOA->MODER |=
+ (3<<GPIO_MODER_MODER0_Pos) /* PA0 - Current measurement analog input */
+ | (1<<GPIO_MODER_MODER1_Pos) /* PA1 - RS485 TX enable */
+ | (2<<GPIO_MODER_MODER2_Pos) /* PA2 - RS485 TX */
+ | (2<<GPIO_MODER_MODER3_Pos) /* PA3 - RS485 RX */
+ /* PA4 reserved because */
+ | (2<<GPIO_MODER_MODER5_Pos) /* PA5 - Shift register clk/SCLK */
+ | (1<<GPIO_MODER_MODER6_Pos) /* PA6 - LED2 open-drain output */
+ | (2<<GPIO_MODER_MODER7_Pos) /* PA7 - Shift register data/MOSI */
+ | (2<<GPIO_MODER_MODER9_Pos) /* FIXME PA9 - Shift register clear (TIM1_CH2) */
+ | (2<<GPIO_MODER_MODER10_Pos);/* PA10 - Shift register strobe (TIM1_CH3) */
+ GPIOB->MODER |=
+ (2<<GPIO_MODER_MODER1_Pos); /* PB1 - Shift register clear (TIM1_CH3N) */
+
+
+ GPIOA->OTYPER |= GPIO_OTYPER_OT_6; /* LED outputs -> open drain */
+
+ /* Set shift register IO GPIO output speed */
+ GPIOA->OSPEEDR |=
+ (3<<GPIO_OSPEEDR_OSPEEDR5_Pos) /* SCLK */
+ | (3<<GPIO_OSPEEDR_OSPEEDR6_Pos) /* LED1 */
+ | (3<<GPIO_OSPEEDR_OSPEEDR7_Pos) /* MOSI */
+ | (3<<GPIO_OSPEEDR_OSPEEDR10_Pos);/* Strobe */
+ GPIOB->OSPEEDR |=
+ (3<<GPIO_OSPEEDR_OSPEEDR1_Pos); /* Clear */
+
+ GPIOA->AFR[0] |=
+ (1<<GPIO_AFRL_AFRL2_Pos) /* USART1_TX */
+ | (1<<GPIO_AFRL_AFRL3_Pos) /* USART1_RX */
+ | (0<<GPIO_AFRL_AFRL5_Pos) /* SPI1_SCK */
+ | (0<<GPIO_AFRL_AFRL7_Pos); /* SPI1_MOSI */
+ GPIOA->AFR[1] |=
+ (2<<GPIO_AFRH_AFRH2_Pos); /* TIM1_CH3 */
+ GPIOB->AFR[0] |=
+ (2<<GPIO_AFRL_AFRL1_Pos); /* TIM1_CH3N */
+
+ /* Configure SPI controller */
+ /* CPOL=0, CPHA=0, prescaler=8 -> 1MBd */
+ SPI1->CR1 = SPI_CR1_BIDIMODE | SPI_CR1_BIDIOE | SPI_CR1_SSM | SPI_CR1_SSI | SPI_CR1_SPE | (0<<SPI_CR1_BR_Pos) | SPI_CR1_MSTR;
+ SPI1->CR2 = (0xf<<SPI_CR2_DS_Pos);
+ /* Configure TIM1 for display strobe generation */
+ /* Configure UART for RS485 comm */
+ /* 8N1, 115200Bd */
+ TIM1->CR1 = TIM_CR1_ARPE; // | TIM_CR1_OPM; // | TIM_CR1_URS;
+
+ TIM1->PSC = 1; // debug
+ /* CH2 - clear/!MR, CH3 - strobe/STCP */
+ TIM1->CCMR2 = (6<<TIM_CCMR2_OC3M_Pos); // | TIM_CCMR2_OC3PE;
+ TIM1->CCER |= TIM_CCER_CC3E | TIM_CCER_CC3NE | TIM_CCER_CC3P | TIM_CCER_CC3NP;
+ TIM1->BDTR = TIM_BDTR_MOE | (8<<TIM_BDTR_DTG_Pos); /* 1us dead time */
+ TIM1->DIER = TIM_DIER_UIE;
+ TIM1->ARR = 1;
+ TIM1->CR1 |= TIM_CR1_CEN;
+
+ NVIC_EnableIRQ(TIM1_BRK_UP_TRG_COM_IRQn);
+ NVIC_SetPriority(TIM1_BRK_UP_TRG_COM_IRQn, 2);
+
+ TIM1->EGR |= TIM_EGR_UG;
+
+ while (42) {
+#define HUE_MAX ((1<<NBITS)*6)
+#define HUE_OFFX 0.15F /* 0-1 */
+#define HUE_AMPLITUDE 0.05F /* 0-1 */
+#define CHANNEL_SPACING 1.5F /* in radians */
+#define WHITE 0.2F /* 0-1 */
+ for (float v=0; v<8*M_PI; v += 0.01F) {
+ GPIOA->ODR ^= GPIO_ODR_6;
+ /* generate hsv fade */
+ for (int ch=0; ch<8; ch++) {
+ hue = HUE_MAX * (HUE_OFFX + HUE_AMPLITUDE*sinf(v + ch*CHANNEL_SPACING));
+ hue %= HUE_MAX;
+ hsv_set(ch, hue, WHITE*(1<<NBITS));
+ }
+ do_transpose();
+ for (int k=0; k<10000; k++) {
+ asm volatile("nop");
+ }
+ }
+ }
+}
+
+uint32_t brightness[32] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+volatile uint32_t brightness_by_bit[NBITS] = { 0 };
+
+void do_transpose(void) {
+ for (uint32_t i=0; i<NBITS; i++) {
+ uint32_t bv = 0;
+ uint32_t mask = 1<<i;
+ for (uint32_t j=0; j<32; j++) {
+ if (brightness[j] & mask)
+ bv |= 1<<j;
+ }
+ brightness_by_bit[i] = bv;
+ }
+}
+
+void TIM1_BRK_UP_TRG_COM_IRQHandler(void) {
+ /* The index of the currently active bit. On entry of this function, this is the bit index of the upcoming period.
+ * On exit it is the index of the *next* period. */
+ static uint32_t idx = 0;
+
+ /* Access bits offset by one as we are setting the *next* period based on idx below. */
+ uint32_t val = brightness_by_bit[idx];
+
+ idx++;
+ if (idx >= NBITS)
+ idx = 0;
+
+ GPIOA->ODR ^= GPIO_ODR_6; /* LED1 */
+
+ /* Shift out the current period's data. The shift register clear and strobe lines are handled by the timers
+ * capture/compare channel 3 complementary outputs. The dead-time generator is used to sequence the clear and strobe
+ * edges one after another. Since there may be small variations in IRQ service latency it is critical to allow for
+ * some leeway between the end of this data transmission and strobe and clear. */
+ SPI1->DR = (val&0xffff);
+ while (SPI1->SR & SPI_SR_BSY);
+ SPI1->DR = (val>>16);
+ while (SPI1->SR & SPI_SR_BSY);
+
+ /* Set up everything for the *next* period. The timer is set to count from 0 to ARR. ARR and CCR3 are pre-loaded, so
+ * the values written above will only be latched on timer overrun at the end of this period. This is a little
+ * complicated, but doing it this way has the advantage of keeping both duty cycle and frame rate precisely
+ * constant. */
+ const int period_base = 4; /* 1us */
+ const int period = (period_base<<idx) + 4 /* 1us dead time */;
+ const int timer_cycles_for_spi_transmissions = 128;
+ TIM1->ARR = period + timer_cycles_for_spi_transmissions;
+ TIM1->CCR3 = timer_cycles_for_spi_transmissions;
+ TIM1->SR &= ~TIM_SR_UIF_Msk;
+}
+
+void NMI_Handler(void) {
+}
+
+void HardFault_Handler(void) {
+ for(;;);
+}
+
+void SVC_Handler(void) {
+}
+
+
+void PendSV_Handler(void) {
+}
+
+void SysTick_Handler(void) {
+}
+
+/* FIXME */
+void _exit(void) {}
+void *__bss_start__;
+void *__bss_end__;
+
+int __errno;
diff --git a/olsndot/firmware/openocd.cfg b/olsndot/firmware/openocd.cfg
new file mode 100644
index 0000000..2dc74f0
--- /dev/null
+++ b/olsndot/firmware/openocd.cfg
@@ -0,0 +1,10 @@
+telnet_port 4444
+gdb_port 3333
+
+interface jlink
+#adapter_khz 10000
+transport select swd
+
+source /usr/share/openocd/scripts/target/stm32f0x.cfg
+
+#flash bank sysflash.alias stm32f0x 0x00000000 0 0 0 $_TARGETNAME
diff --git a/olsndot/firmware/startup_stm32f030x6.s b/olsndot/firmware/startup_stm32f030x6.s
new file mode 100644
index 0000000..ce81b76
--- /dev/null
+++ b/olsndot/firmware/startup_stm32f030x6.s
@@ -0,0 +1,273 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f030x6.s
+ * copied from: STM32Cube/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc
+ * @author MCD Application Team
+ * @version V2.3.1
+ * @date 04-November-2016
+ * @brief STM32F030x4/STM32F030x6 devices vector table for Atollic TrueSTUDIO toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M0 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m0
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr r0, =_estack
+ mov sp, r0 /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2]
+ adds r2, r2, #4
+
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word 0
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word 0 /* Reserved */
+ .word RTC_IRQHandler /* RTC through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_IRQHandler /* RCC */
+ .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
+ .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
+ .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
+ .word 0 /* Reserved */
+ .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
+ .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
+ .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
+ .word ADC1_IRQHandler /* ADC1 */
+ .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word 0 /* Reserved */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+ .word TIM14_IRQHandler /* TIM14 */
+ .word 0 /* Reserved */
+ .word TIM16_IRQHandler /* TIM16 */
+ .word TIM17_IRQHandler /* TIM17 */
+ .word I2C1_IRQHandler /* I2C1 */
+ .word 0 /* Reserved */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word 0 /* Reserved */
+ .word USART1_IRQHandler /* USART1 */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_1_IRQHandler
+ .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+ .weak EXTI2_3_IRQHandler
+ .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+ .weak EXTI4_15_IRQHandler
+ .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_3_IRQHandler
+ .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_5_IRQHandler
+ .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
+
+ .weak ADC1_IRQHandler
+ .thumb_set ADC1_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_UP_TRG_COM_IRQHandler
+ .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM14_IRQHandler
+ .thumb_set TIM14_IRQHandler,Default_Handler
+
+ .weak TIM16_IRQHandler
+ .thumb_set TIM16_IRQHandler,Default_Handler
+
+ .weak TIM17_IRQHandler
+ .thumb_set TIM17_IRQHandler,Default_Handler
+
+ .weak I2C1_IRQHandler
+ .thumb_set I2C1_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/olsndot/firmware/stm32_flash.ld b/olsndot/firmware/stm32_flash.ld
new file mode 100644
index 0000000..927e8b4
--- /dev/null
+++ b/olsndot/firmware/stm32_flash.ld
@@ -0,0 +1,124 @@
+
+ENTRY(Reset_Handler)
+
+MEMORY {
+ FLASH (rx): ORIGIN = 0x08000000, LENGTH = 16K
+ RAM (xrw): ORIGIN = 0x20000000, LENGTH = 4K
+}
+
+/* highest address of the user mode stack */
+_estack = 0x20001000;
+
+SECTIONS {
+ /* for Cortex devices, the beginning of the startup code is stored in the .isr_vector section, which goes to FLASH */
+ .isr_vector : {
+ . = ALIGN(4);
+ KEEP(*(.isr_vector)) /* Startup code */
+ . = ALIGN(4);
+ } >FLASH
+
+ /* the program code is stored in the .text section, which goes to Flash */
+ .text : {
+ . = ALIGN(4);
+
+ *(.text) /* normal code */
+ *(.text.*) /* -ffunction-sections code */
+ *(.rodata) /* read-only data (constants) */
+ *(.rodata*) /* -fdata-sections read only data */
+ *(.glue_7) /* TBD - needed ? */
+ *(.glue_7t) /* TBD - needed ? */
+
+ /* Necessary KEEP sections (see http://sourceware.org/ml/newlib/2005/msg00255.html) */
+ KEEP (*(.init))
+ KEEP (*(.fini))
+
+ . = ALIGN(4);
+ _etext = .;
+ /* This is used by the startup in order to initialize the .data section */
+ _sidata = _etext;
+ } >FLASH
+
+ /* This is the initialized data section
+ The program executes knowing that the data is in the RAM
+ but the loader puts the initial values in the FLASH (inidata).
+ It is one task of the startup to copy the initial values from FLASH to RAM. */
+ .data : AT ( _sidata ) {
+ . = ALIGN(4);
+ /* This is used by the startup in order to initialize the .data secion */
+ _sdata = . ;
+ _data = . ;
+
+ *(.data)
+ *(.data.*)
+ *(.RAMtext)
+
+ . = ALIGN(4);
+ /* This is used by the startup in order to initialize the .data secion */
+ _edata = . ;
+ } >RAM
+
+ /* This is the uninitialized data section */
+ .bss : {
+ . = ALIGN(4);
+ /* This is used by the startup in order to initialize the .bss secion */
+ _sbss = .;
+ _bss = .;
+
+ *(.bss)
+ *(.bss.*) /* patched by elias - allows the use of -fdata-sections */
+ *(COMMON)
+
+ . = ALIGN(4);
+ /* This is used by the startup in order to initialize the .bss secion */
+ _ebss = . ;
+ } >RAM
+
+ PROVIDE ( end = _ebss);
+ PROVIDE (_end = _ebss);
+
+ __exidx_start = .;
+ __exidx_end = .;
+
+ /* after that it's only debugging information. */
+
+ /* remove the debugging information from the standard libraries */
+ /DISCARD/ : {
+ libc.a ( * )
+ libm.a ( * )
+ libgcc.a ( * )
+ }
+
+ /* Stabs debugging sections. */
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+ .comment 0 : { *(.comment) }
+ /* DWARF debug sections.
+ Symbols in the DWARF debugging sections are relative to the beginning
+ of the section so we begin them at 0. */
+ /* DWARF 1 */
+ .debug 0 : { *(.debug) }
+ .line 0 : { *(.line) }
+ /* GNU DWARF 1 extensions */
+ .debug_srcinfo 0 : { *(.debug_srcinfo) }
+ .debug_sfnames 0 : { *(.debug_sfnames) }
+ /* DWARF 1.1 and DWARF 2 */
+ .debug_aranges 0 : { *(.debug_aranges) }
+ .debug_pubnames 0 : { *(.debug_pubnames) }
+ /* DWARF 2 */
+ .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
+ .debug_abbrev 0 : { *(.debug_abbrev) }
+ .debug_line 0 : { *(.debug_line) }
+ .debug_frame 0 : { *(.debug_frame) }
+ .debug_str 0 : { *(.debug_str) }
+ .debug_loc 0 : { *(.debug_loc) }
+ .debug_macinfo 0 : { *(.debug_macinfo) }
+ /* SGI/MIPS DWARF 2 extensions */
+ .debug_weaknames 0 : { *(.debug_weaknames) }
+ .debug_funcnames 0 : { *(.debug_funcnames) }
+ .debug_typenames 0 : { *(.debug_typenames) }
+ .debug_varnames 0 : { *(.debug_varnames) }
+}
diff --git a/olsndot/firmware/system_stm32f0xx.c b/olsndot/firmware/system_stm32f0xx.c
new file mode 100644
index 0000000..c578424
--- /dev/null
+++ b/olsndot/firmware/system_stm32f0xx.c
@@ -0,0 +1,336 @@
+/**
+ ******************************************************************************
+ * @file system_stm32f0xx.c
+ * copied from: STM32Cube/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates
+ * @author MCD Application Team
+ * @version V2.3.1
+ * @date 04-November-2016
+ * @brief CMSIS Cortex-M0 Device Peripheral Access Layer System Source File.
+ *
+ * 1. This file provides two functions and one global variable to be called from
+ * user application:
+ * - SystemInit(): This function is called at startup just after reset and
+ * before branch to main program. This call is made inside
+ * the "startup_stm32f0xx.s" file.
+ *
+ * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+ * by the user application to setup the SysTick
+ * timer or configure other parameters.
+ *
+ * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+ * be called whenever the core clock is changed
+ * during program execution.
+ *
+ * 2. After each device reset the HSI (8 MHz) is used as system clock source.
+ * Then SystemInit() function is called, in "startup_stm32f0xx.s" file, to
+ * configure the system clock before to branch to main program.
+ *
+ * 3. This file configures the system clock as follows:
+ *=============================================================================
+ * Supported STM32F0xx device
+ *-----------------------------------------------------------------------------
+ * System Clock source | HSI
+ *-----------------------------------------------------------------------------
+ * SYSCLK(Hz) | 8000000
+ *-----------------------------------------------------------------------------
+ * HCLK(Hz) | 8000000
+ *-----------------------------------------------------------------------------
+ * AHB Prescaler | 1
+ *-----------------------------------------------------------------------------
+ * APB1 Prescaler | 1
+ *-----------------------------------------------------------------------------
+ *=============================================================================
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f0xx_system
+ * @{
+ */
+
+/** @addtogroup STM32F0xx_System_Private_Includes
+ * @{
+ */
+
+#include "stm32f0xx.h"
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Private_Defines
+ * @{
+ */
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)8000000) /*!< Default value of the External oscillator in Hz.
+ This value can be provided and adapted by the user application. */
+#endif /* HSE_VALUE */
+
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)8000000) /*!< Default value of the Internal oscillator in Hz.
+ This value can be provided and adapted by the user application. */
+#endif /* HSI_VALUE */
+
+#if !defined (HSI48_VALUE)
+#define HSI48_VALUE ((uint32_t)48000000) /*!< Default value of the HSI48 Internal oscillator in Hz.
+ This value can be provided and adapted by the user application. */
+#endif /* HSI48_VALUE */
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Private_Variables
+ * @{
+ */
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+ 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+ Note: If you use this function to configure the system clock there is no need to
+ call the 2 first functions listed above, since SystemCoreClock variable is
+ updated automatically.
+ */
+uint32_t SystemCoreClock = 8000000;
+
+const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4};
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Setup the microcontroller system.
+ * Initialize the default HSI clock source, vector table location and the PLL configuration is reset.
+ * @param None
+ * @retval None
+ */
+void SystemInit(void)
+{
+ /* Reset the RCC clock configuration to the default reset state ------------*/
+ /* Set HSION bit */
+ RCC->CR |= (uint32_t)0x00000001U;
+
+#if defined (STM32F051x8) || defined (STM32F058x8)
+ /* Reset SW[1:0], HPRE[3:0], PPRE[2:0], ADCPRE and MCOSEL[2:0] bits */
+ RCC->CFGR &= (uint32_t)0xF8FFB80CU;
+#else
+ /* Reset SW[1:0], HPRE[3:0], PPRE[2:0], ADCPRE, MCOSEL[2:0], MCOPRE[2:0] and PLLNODIV bits */
+ RCC->CFGR &= (uint32_t)0x08FFB80CU;
+#endif /* STM32F051x8 or STM32F058x8 */
+
+ /* Reset HSEON, CSSON and PLLON bits */
+ RCC->CR &= (uint32_t)0xFEF6FFFFU;
+
+ /* Reset HSEBYP bit */
+ RCC->CR &= (uint32_t)0xFFFBFFFFU;
+
+ /* Reset PLLSRC, PLLXTPRE and PLLMUL[3:0] bits */
+ RCC->CFGR &= (uint32_t)0xFFC0FFFFU;
+
+ /* Reset PREDIV[3:0] bits */
+ RCC->CFGR2 &= (uint32_t)0xFFFFFFF0U;
+
+#if defined (STM32F072xB) || defined (STM32F078xx)
+ /* Reset USART2SW[1:0], USART1SW[1:0], I2C1SW, CECSW, USBSW and ADCSW bits */
+ RCC->CFGR3 &= (uint32_t)0xFFFCFE2CU;
+#elif defined (STM32F071xB)
+ /* Reset USART2SW[1:0], USART1SW[1:0], I2C1SW, CECSW and ADCSW bits */
+ RCC->CFGR3 &= (uint32_t)0xFFFFCEACU;
+#elif defined (STM32F091xC) || defined (STM32F098xx)
+ /* Reset USART3SW[1:0], USART2SW[1:0], USART1SW[1:0], I2C1SW, CECSW and ADCSW bits */
+ RCC->CFGR3 &= (uint32_t)0xFFF0FEACU;
+#elif defined (STM32F030x6) || defined (STM32F030x8) || defined (STM32F031x6) || defined (STM32F038xx) || defined (STM32F030xC)
+ /* Reset USART1SW[1:0], I2C1SW and ADCSW bits */
+ RCC->CFGR3 &= (uint32_t)0xFFFFFEECU;
+#elif defined (STM32F051x8) || defined (STM32F058xx)
+ /* Reset USART1SW[1:0], I2C1SW, CECSW and ADCSW bits */
+ RCC->CFGR3 &= (uint32_t)0xFFFFFEACU;
+#elif defined (STM32F042x6) || defined (STM32F048xx)
+ /* Reset USART1SW[1:0], I2C1SW, CECSW, USBSW and ADCSW bits */
+ RCC->CFGR3 &= (uint32_t)0xFFFFFE2CU;
+#elif defined (STM32F070x6) || defined (STM32F070xB)
+ /* Reset USART1SW[1:0], I2C1SW, USBSW and ADCSW bits */
+ RCC->CFGR3 &= (uint32_t)0xFFFFFE6CU;
+ /* Set default USB clock to PLLCLK, since there is no HSI48 */
+ RCC->CFGR3 |= (uint32_t)0x00000080U;
+#else
+ #warning "No target selected"
+#endif
+
+ /* Reset HSI14 bit */
+ RCC->CR2 &= (uint32_t)0xFFFFFFFEU;
+
+ /* Disable all interrupts */
+ RCC->CIR = 0x00000000U;
+
+}
+
+/**
+ * @brief Update SystemCoreClock variable according to Clock Register Values.
+ * The SystemCoreClock variable contains the core clock (HCLK), it can
+ * be used by the user application to setup the SysTick timer or configure
+ * other parameters.
+ *
+ * @note Each time the core clock (HCLK) changes, this function must be called
+ * to update SystemCoreClock variable value. Otherwise, any configuration
+ * based on this variable will be incorrect.
+ *
+ * @note - The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ *
+ * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+ *
+ * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+ *
+ * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
+ * or HSI_VALUE(*) multiplied/divided by the PLL factors.
+ *
+ * (*) HSI_VALUE is a constant defined in stm32f0xx_hal.h file (default value
+ * 8 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ *
+ * (**) HSE_VALUE is a constant defined in stm32f0xx_hal.h file (default value
+ * 8 MHz), user has to ensure that HSE_VALUE is same as the real
+ * frequency of the crystal used. Otherwise, this function may
+ * have wrong result.
+ *
+ * - The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ *
+ * @param None
+ * @retval None
+ */
+void SystemCoreClockUpdate (void)
+{
+ uint32_t tmp = 0, pllmull = 0, pllsource = 0, predivfactor = 0;
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+ switch (tmp)
+ {
+ case RCC_CFGR_SWS_HSI: /* HSI used as system clock */
+ SystemCoreClock = HSI_VALUE;
+ break;
+ case RCC_CFGR_SWS_HSE: /* HSE used as system clock */
+ SystemCoreClock = HSE_VALUE;
+ break;
+ case RCC_CFGR_SWS_PLL: /* PLL used as system clock */
+ /* Get PLL clock source and multiplication factor ----------------------*/
+ pllmull = RCC->CFGR & RCC_CFGR_PLLMUL;
+ pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
+ pllmull = ( pllmull >> 18) + 2;
+ predivfactor = (RCC->CFGR2 & RCC_CFGR2_PREDIV) + 1;
+
+ if (pllsource == RCC_CFGR_PLLSRC_HSE_PREDIV)
+ {
+ /* HSE used as PLL clock source : SystemCoreClock = HSE/PREDIV * PLLMUL */
+ SystemCoreClock = (HSE_VALUE/predivfactor) * pllmull;
+ }
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+ else if (pllsource == RCC_CFGR_PLLSRC_HSI48_PREDIV)
+ {
+ /* HSI48 used as PLL clock source : SystemCoreClock = HSI48/PREDIV * PLLMUL */
+ SystemCoreClock = (HSI48_VALUE/predivfactor) * pllmull;
+ }
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx */
+ else
+ {
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) \
+ || defined(STM32F078xx) || defined(STM32F071xB) || defined(STM32F072xB) \
+ || defined(STM32F070xB) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+ /* HSI used as PLL clock source : SystemCoreClock = HSI/PREDIV * PLLMUL */
+ SystemCoreClock = (HSI_VALUE/predivfactor) * pllmull;
+#else
+ /* HSI used as PLL clock source : SystemCoreClock = HSI/2 * PLLMUL */
+ SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
+#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 ||
+ STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB ||
+ STM32F091xC || STM32F098xx || STM32F030xC */
+ }
+ break;
+ default: /* HSI used as system clock */
+ SystemCoreClock = HSI_VALUE;
+ break;
+ }
+ /* Compute HCLK clock frequency ----------------*/
+ /* Get HCLK prescaler */
+ tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+ /* HCLK clock frequency */
+ SystemCoreClock >>= tmp;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
generated by cgit (git 2.34.1) at 2024-06-01 23:52:55 +0000