/** ****************************************************************************** * @file stm32f0xx_hal_timebase_rtc_wakeup_template.c * @brief HAL time base based on the hardware RTC_WAKEUP Template. * * This file overrides the native HAL time base functions (defined as weak) * to use the RTC WAKEUP for the time base generation: * + Intializes the RTC peripheral and configures the wakeup timer to be * incremented each 1ms * + The wakeup feature is configured to assert an interrupt each 1ms * + HAL_IncTick is called inside the HAL_RTCEx_WakeUpTimerEventCallback * + HSE (default), LSE or LSI can be selected as RTC clock source @verbatim ============================================================================== ##### How to use this driver ##### ============================================================================== [..] This file must be copied to the application folder and modified as follows: (#) Rename it to 'stm32f0xx_hal_timebase_rtc_wakeup.c' (#) Add this file and the RTC HAL drivers to your project and uncomment HAL_RTC_MODULE_ENABLED define in stm32f0xx_hal_conf.h [..] (@) HAL RTC alarm and HAL RTC wakeup drivers can’t be used with low power modes: The wake up capability of the RTC may be intrusive in case of prior low power mode configuration requiring different wake up sources. Application/Example behavior is no more guaranteed (@) The stm32f0xx_hal_timebase_tim use is recommended for the Applications/Examples requiring low power modes @endverbatim ****************************************************************************** * @attention * *

© Copyright (c) 2016 STMicroelectronics. * All rights reserved.

* * This software component is licensed by ST under BSD 3-Clause license, * the "License"; You may not use this file except in compliance with the * License. You may obtain a copy of the License at: * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include "stm32f0xx_hal.h" /** @addtogroup STM32F0xx_HAL_Driver * @{ */ /** @defgroup HAL_TimeBase_RTC_WakeUp_Template HAL TimeBase RTC WakeUp Template * @{ */ /* Private typedef -----------------------------------------------------------*/ /* Private define ------------------------------------------------------------*/ /* Uncomment the line below to select the appropriate RTC Clock source for your application: + RTC_CLOCK_SOURCE_HSE: can be selected for applications requiring timing precision. + RTC_CLOCK_SOURCE_LSE: can be selected for applications with low constraint on timing precision. + RTC_CLOCK_SOURCE_LSI: can be selected for applications with low constraint on timing precision. */ #define RTC_CLOCK_SOURCE_HSE /* #define RTC_CLOCK_SOURCE_LSE */ /* #define RTC_CLOCK_SOURCE_LSI */ #if defined(RTC_CLOCK_SOURCE_HSE) #define RTC_ASYNCH_PREDIV 49U #define RTC_SYNCH_PREDIV 4U #elif defined(RTC_CLOCK_SOURCE_LSE) #define RTC_ASYNCH_PREDIV 0U #define RTC_SYNCH_PREDIV 31U #else /* CLOCK_SOURCE_LSI */ #define RTC_ASYNCH_PREDIV 0U #define RTC_SYNCH_PREDIV 39U #endif /* RTC_CLOCK_SOURCE_HSE */ /* Private macro -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ RTC_HandleTypeDef hRTC_Handle; /* Private function prototypes -----------------------------------------------*/ void RTC_IRQHandler(void); /* Private functions ---------------------------------------------------------*/ /** * @brief This function configures the RTC_WKUP as a time base source. * The time source is configured to have 1ms time base with a dedicated * Tick interrupt priority. * Wakeup Time base = ((RTC_ASYNCH_PREDIV + 1) * (RTC_SYNCH_PREDIV + 1)) / RTC_CLOCK = 1ms * Wakeup Time = WakeupTimebase * WakeUpCounter (0 + 1) = 1 ms * @note This function is called automatically at the beginning of program after * reset by HAL_Init() or at any time when clock is configured, by HAL_RCC_ClockConfig(). * @param TickPriority Tick interrupt priority. * @retval HAL status */ HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority) { __IO uint32_t counter = 0U; RCC_OscInitTypeDef RCC_OscInitStruct; RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; #ifdef RTC_CLOCK_SOURCE_LSE /* Configue LSE as RTC clock soucre */ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE; RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; RCC_OscInitStruct.LSEState = RCC_LSE_ON; PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSE; #elif defined (RTC_CLOCK_SOURCE_LSI) /* Configue LSI as RTC clock soucre */ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI; RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; RCC_OscInitStruct.LSIState = RCC_LSI_ON; PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSI; #elif defined (RTC_CLOCK_SOURCE_HSE) /* Configue HSE as RTC clock soucre */ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; RCC_OscInitStruct.HSEState = RCC_HSE_ON; PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_HSE_DIV32; #else #error Please select the RTC Clock source #endif /* RTC_CLOCK_SOURCE_LSE */ if(HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) { PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RTC; if(HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) == HAL_OK) { /* Enable RTC Clock */ __HAL_RCC_RTC_ENABLE(); /* The time base should be 1ms Time base = ((RTC_ASYNCH_PREDIV + 1) * (RTC_SYNCH_PREDIV + 1)) / RTC_CLOCK HSE/32 as RTC clock and HSE 8MHz Time base = ((49 + 1) * (4 + 1)) / 250kHz = 1ms LSE as RTC clock Time base = ((31 + 1) * (0 + 1)) / 32.768Khz = ~1ms LSI as RTC clock Time base = ((39 + 1) * (0 + 1)) / 40Khz = 1ms */ hRTC_Handle.Instance = RTC; hRTC_Handle.Init.HourFormat = RTC_HOURFORMAT_24; hRTC_Handle.Init.AsynchPrediv = RTC_ASYNCH_PREDIV; hRTC_Handle.Init.SynchPrediv = RTC_SYNCH_PREDIV; hRTC_Handle.Init.OutPut = RTC_OUTPUT_DISABLE; hRTC_Handle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH; hRTC_Handle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN; HAL_RTC_Init(&hRTC_Handle); /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle); /* Disable the Wake-up Timer */ __HAL_RTC_WAKEUPTIMER_DISABLE(&hRTC_Handle); /* In case of interrupt mode is used, the interrupt source must disabled */ __HAL_RTC_WAKEUPTIMER_DISABLE_IT(&hRTC_Handle,RTC_IT_WUT); /* Wait till RTC WUTWF flag is set */ while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(&hRTC_Handle, RTC_FLAG_WUTWF) == RESET) { if(counter++ == (SystemCoreClock /48U)) { return HAL_ERROR; } } /* Clear PWR wake up Flag */ __HAL_PWR_CLEAR_FLAG(PWR_FLAG_WU); /* Clear RTC Wake Up timer Flag */ __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(&hRTC_Handle, RTC_FLAG_WUTF); /* Configure the Wake-up Timer counter */ hRTC_Handle.Instance->WUTR = 0U; /* Clear the Wake-up Timer clock source bits in CR register */ hRTC_Handle.Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL; /* Configure the clock source */ hRTC_Handle.Instance->CR |= (uint32_t)RTC_WAKEUPCLOCK_CK_SPRE_16BITS; /* RTC WakeUpTimer Interrupt Configuration: EXTI configuration */ __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT(); __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE(); /* Configure the Interrupt in the RTC_CR register */ __HAL_RTC_WAKEUPTIMER_ENABLE_IT(&hRTC_Handle,RTC_IT_WUT); /* Enable the Wake-up Timer */ __HAL_RTC_WAKEUPTIMER_ENABLE(&hRTC_Handle); /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle); HAL_NVIC_SetPriority(RTC_IRQn, TickPriority, 0U); HAL_NVIC_EnableIRQ(RTC_IRQn); return HAL_OK; } } return HAL_ERROR; } /** * @brief Suspend Tick increment. * @note Disable the tick increment by disabling RTC_WKUP interrupt. * @param None * @retval None */ void HAL_SuspendTick(void) { /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle); /* Disable WAKE UP TIMER Interrupt */ __HAL_RTC_WAKEUPTIMER_DISABLE_IT(&hRTC_Handle, RTC_IT_WUT); /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle); } /** * @brief Resume Tick increment. * @note Enable the tick increment by Enabling RTC_WKUP interrupt. * @param None * @retval None */ void HAL_ResumeTick(void) { /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle); /* Enable WAKE UP TIMER interrupt */ __HAL_RTC_WAKEUPTIMER_ENABLE_IT(&hRTC_Handle, RTC_IT_WUT); /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle); } /** * @brief Wake Up Timer Event Callback in non blocking mode * @note This function is called when RTC_WKUP interrupt took place, inside * RTC_IRQHandler(). It makes a direct call to HAL_IncTick() to increment * a global variable "uwTick" used as application time base. * @param hrtc RTC handle * @retval None */ void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc) { HAL_IncTick(); } /** * @brief This function handles WAKE UP TIMER interrupt request. * @param None * @retval None */ void RTC_IRQHandler(void) { HAL_RTCEx_WakeUpTimerIRQHandler(&hRTC_Handle); } /** * @} */ /** * @} */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/