ARM GAS /tmp/cc59XfgU.s page 1 1 .cpu cortex-m0 2 .eabi_attribute 20, 1 3 .eabi_attribute 21, 1 4 .eabi_attribute 23, 3 5 .eabi_attribute 24, 1 6 .eabi_attribute 25, 1 7 .eabi_attribute 26, 1 8 .eabi_attribute 30, 1 9 .eabi_attribute 34, 0 10 .eabi_attribute 18, 4 11 .file "stm32f0xx_hal_pwr.c" 12 .text 13 .Ltext0: 14 .cfi_sections .debug_frame 15 .section .text.HAL_PWR_DeInit,"ax",%progbits 16 .align 1 17 .global HAL_PWR_DeInit 18 .syntax unified 19 .code 16 20 .thumb_func 21 .fpu softvfp 23 HAL_PWR_DeInit: 24 .LFB40: 25 .file 1 "Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c" 1:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /** 2:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** ****************************************************************************** 3:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @file stm32f0xx_hal_pwr.c 4:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @author MCD Application Team 5:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @brief PWR HAL module driver. 6:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * This file provides firmware functions to manage the following 7:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * functionalities of the Power Controller (PWR) peripheral: 8:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * + Initialization/de-initialization function 9:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * + Peripheral Control function 10:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * 11:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** @verbatim 12:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** ****************************************************************************** 13:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @attention 14:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * 15:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** *

© Copyright (c) 2016 STMicroelectronics. 16:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * All rights reserved.

17:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * 18:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * This software component is licensed by ST under BSD 3-Clause license, 19:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * the "License"; You may not use this file except in compliance with the 20:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * License. You may obtain a copy of the License at: 21:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * opensource.org/licenses/BSD-3-Clause 22:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * 23:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** ****************************************************************************** 24:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** */ 25:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 26:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /* Includes ------------------------------------------------------------------*/ 27:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** #include "stm32f0xx_hal.h" 28:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 29:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /** @addtogroup STM32F0xx_HAL_Driver 30:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @{ 31:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** */ 32:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 33:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /** @defgroup PWR PWR ARM GAS /tmp/cc59XfgU.s page 2 34:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @brief PWR HAL module driver 35:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @{ 36:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** */ 37:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 38:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** #ifdef HAL_PWR_MODULE_ENABLED 39:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 40:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /* Private typedef -----------------------------------------------------------*/ 41:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /* Private define ------------------------------------------------------------*/ 42:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /* Private macro -------------------------------------------------------------*/ 43:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /* Private variables ---------------------------------------------------------*/ 44:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /* Private function prototypes -----------------------------------------------*/ 45:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /* Private functions ---------------------------------------------------------*/ 46:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 47:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /** @defgroup PWR_Exported_Functions PWR Exported Functions 48:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @{ 49:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** */ 50:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 51:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions 52:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @brief Initialization and de-initialization functions 53:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * 54:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** @verbatim 55:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** =============================================================================== 56:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** ##### Initialization and de-initialization functions ##### 57:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** =============================================================================== 58:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** [..] 59:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** After reset, the backup domain (RTC registers, RTC backup data 60:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** registers) is protected against possible unwanted 61:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** write accesses. 62:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** To enable access to the RTC Domain and RTC registers, proceed as follows: 63:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (+) Enable the Power Controller (PWR) APB1 interface clock using the 64:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** __HAL_RCC_PWR_CLK_ENABLE() macro. 65:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function. 66:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 67:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** @endverbatim 68:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @{ 69:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** */ 70:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 71:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /** 72:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @brief Deinitializes the PWR peripheral registers to their default reset values. 73:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @retval None 74:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** */ 75:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** void HAL_PWR_DeInit(void) 76:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** { 26 .loc 1 76 0 27 .cfi_startproc 28 @ args = 0, pretend = 0, frame = 0 29 @ frame_needed = 0, uses_anonymous_args = 0 30 @ link register save eliminated. 77:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** __HAL_RCC_PWR_FORCE_RESET(); 31 .loc 1 77 0 32 0000 054B ldr r3, .L2 33 0002 1969 ldr r1, [r3, #16] 34 0004 8022 movs r2, #128 35 0006 5205 lsls r2, r2, #21 36 0008 0A43 orrs r2, r1 37 000a 1A61 str r2, [r3, #16] 78:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** __HAL_RCC_PWR_RELEASE_RESET(); ARM GAS /tmp/cc59XfgU.s page 3 38 .loc 1 78 0 39 000c 1A69 ldr r2, [r3, #16] 40 000e 0349 ldr r1, .L2+4 41 0010 0A40 ands r2, r1 42 0012 1A61 str r2, [r3, #16] 79:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** } 43 .loc 1 79 0 44 @ sp needed 45 0014 7047 bx lr 46 .L3: 47 0016 C046 .align 2 48 .L2: 49 0018 00100240 .word 1073876992 50 001c FFFFFFEF .word -268435457 51 .cfi_endproc 52 .LFE40: 54 .section .text.HAL_PWR_EnableBkUpAccess,"ax",%progbits 55 .align 1 56 .global HAL_PWR_EnableBkUpAccess 57 .syntax unified 58 .code 16 59 .thumb_func 60 .fpu softvfp 62 HAL_PWR_EnableBkUpAccess: 63 .LFB41: 80:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 81:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /** 82:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @brief Enables access to the backup domain (RTC registers, RTC 83:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * backup data registers when present). 84:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @note If the HSE divided by 32 is used as the RTC clock, the 85:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * Backup Domain Access should be kept enabled. 86:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @retval None 87:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** */ 88:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** void HAL_PWR_EnableBkUpAccess(void) 89:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** { 64 .loc 1 89 0 65 .cfi_startproc 66 @ args = 0, pretend = 0, frame = 0 67 @ frame_needed = 0, uses_anonymous_args = 0 68 @ link register save eliminated. 90:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** PWR->CR |= (uint32_t)PWR_CR_DBP; 69 .loc 1 90 0 70 0000 034A ldr r2, .L5 71 0002 1168 ldr r1, [r2] 72 0004 8023 movs r3, #128 73 0006 5B00 lsls r3, r3, #1 74 0008 0B43 orrs r3, r1 75 000a 1360 str r3, [r2] 91:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** } 76 .loc 1 91 0 77 @ sp needed 78 000c 7047 bx lr 79 .L6: 80 000e C046 .align 2 81 .L5: 82 0010 00700040 .word 1073770496 83 .cfi_endproc ARM GAS /tmp/cc59XfgU.s page 4 84 .LFE41: 86 .section .text.HAL_PWR_DisableBkUpAccess,"ax",%progbits 87 .align 1 88 .global HAL_PWR_DisableBkUpAccess 89 .syntax unified 90 .code 16 91 .thumb_func 92 .fpu softvfp 94 HAL_PWR_DisableBkUpAccess: 95 .LFB42: 92:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 93:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /** 94:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @brief Disables access to the backup domain (RTC registers, RTC 95:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * backup data registers when present). 96:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @note If the HSE divided by 32 is used as the RTC clock, the 97:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * Backup Domain Access should be kept enabled. 98:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @retval None 99:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** */ 100:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** void HAL_PWR_DisableBkUpAccess(void) 101:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** { 96 .loc 1 101 0 97 .cfi_startproc 98 @ args = 0, pretend = 0, frame = 0 99 @ frame_needed = 0, uses_anonymous_args = 0 100 @ link register save eliminated. 102:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** PWR->CR &= ~((uint32_t)PWR_CR_DBP); 101 .loc 1 102 0 102 0000 024A ldr r2, .L8 103 0002 1368 ldr r3, [r2] 104 0004 0249 ldr r1, .L8+4 105 0006 0B40 ands r3, r1 106 0008 1360 str r3, [r2] 103:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** } 107 .loc 1 103 0 108 @ sp needed 109 000a 7047 bx lr 110 .L9: 111 .align 2 112 .L8: 113 000c 00700040 .word 1073770496 114 0010 FFFEFFFF .word -257 115 .cfi_endproc 116 .LFE42: 118 .section .text.HAL_PWR_EnableWakeUpPin,"ax",%progbits 119 .align 1 120 .global HAL_PWR_EnableWakeUpPin 121 .syntax unified 122 .code 16 123 .thumb_func 124 .fpu softvfp 126 HAL_PWR_EnableWakeUpPin: 127 .LFB43: 104:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 105:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /** 106:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @} 107:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** */ 108:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** ARM GAS /tmp/cc59XfgU.s page 5 109:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions 110:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @brief Low Power modes configuration functions 111:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * 112:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** @verbatim 113:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 114:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** =============================================================================== 115:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** ##### Peripheral Control functions ##### 116:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** =============================================================================== 117:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 118:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** *** WakeUp pin configuration *** 119:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** ================================ 120:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** [..] 121:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (+) WakeUp pin is used to wakeup the system from Standby mode. This pin is 122:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** forced in input pull down configuration and is active on rising edges. 123:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (+) There are two WakeUp pins, and up to eight Wakeup pins on STM32F07x & STM32F09x devices. 124:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (++)WakeUp Pin 1 on PA.00. 125:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (++)WakeUp Pin 2 on PC.13. 126:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (++)WakeUp Pin 3 on PE.06.(STM32F07x/STM32F09x) 127:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (++)WakeUp Pin 4 on PA.02.(STM32F07x/STM32F09x) 128:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (++)WakeUp Pin 5 on PC.05.(STM32F07x/STM32F09x) 129:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (++)WakeUp Pin 6 on PB.05.(STM32F07x/STM32F09x) 130:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (++)WakeUp Pin 7 on PB.15.(STM32F07x/STM32F09x) 131:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (++)WakeUp Pin 8 on PF.02.(STM32F07x/STM32F09x) 132:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 133:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** *** Low Power modes configuration *** 134:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** ===================================== 135:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** [..] 136:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** The devices feature 3 low-power modes: 137:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (+) Sleep mode: Cortex-M0 core stopped, peripherals kept running. 138:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (+) Stop mode: all clocks are stopped, regulator running, regulator 139:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** in low power mode 140:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (+) Standby mode: 1.2V domain powered off (mode not available on STM32F0x8 devices). 141:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 142:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** *** Sleep mode *** 143:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** ================== 144:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** [..] 145:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (+) Entry: 146:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** The Sleep mode is entered by using the HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_S 147:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** functions with 148:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction 149:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction 150:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 151:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (+) Exit: 152:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (++) Any peripheral interrupt acknowledged by the nested vectored interrupt 153:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** controller (NVIC) can wake up the device from Sleep mode. 154:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 155:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** *** Stop mode *** 156:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** ================= 157:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** [..] 158:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** In Stop mode, all clocks in the 1.8V domain are stopped, the PLL, the HSI, 159:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** and the HSE RC oscillators are disabled. Internal SRAM and register contents 160:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** are preserved. 161:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** The voltage regulator can be configured either in normal or low-power mode. 162:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** To minimize the consumption. 163:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 164:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (+) Entry: 165:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** The Stop mode is entered using the HAL_PWR_EnterSTOPMode(PWR_MAINREGULATOR_ON, PWR_STOPEN ARM GAS /tmp/cc59XfgU.s page 6 166:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** function with: 167:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (++) Main regulator ON. 168:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (++) Low Power regulator ON. 169:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (++) PWR_STOPENTRY_WFI: enter STOP mode with WFI instruction 170:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (++) PWR_STOPENTRY_WFE: enter STOP mode with WFE instruction 171:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (+) Exit: 172:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (++) Any EXTI Line (Internal or External) configured in Interrupt/Event mode. 173:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (++) Some specific communication peripherals (CEC, USART, I2C) interrupts, 174:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** when programmed in wakeup mode (the peripheral must be 175:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** programmed in wakeup mode and the corresponding interrupt vector 176:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** must be enabled in the NVIC) 177:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 178:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** *** Standby mode *** 179:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** ==================== 180:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** [..] 181:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** The Standby mode allows to achieve the lowest power consumption. It is based 182:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** on the Cortex-M0 deep sleep mode, with the voltage regulator disabled. 183:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** The 1.8V domain is consequently powered off. The PLL, the HSI oscillator and 184:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** the HSE oscillator are also switched off. SRAM and register contents are lost 185:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** except for the RTC registers, RTC backup registers and Standby circuitry. 186:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** The voltage regulator is OFF. 187:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 188:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (+) Entry: 189:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (++) The Standby mode is entered using the HAL_PWR_EnterSTANDBYMode() function. 190:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (+) Exit: 191:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (++) WKUP pin rising edge, RTC alarm (Alarm A), RTC wakeup, 192:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** tamper event, time-stamp event, external reset in NRST pin, IWDG reset. 193:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 194:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** *** Auto-wakeup (AWU) from low-power mode *** 195:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** ============================================= 196:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** [..] 197:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** The MCU can be woken up from low-power mode by an RTC Alarm event, an RTC 198:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** Wakeup event, a tamper event, a time-stamp event, or a comparator event, 199:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** without depending on an external interrupt (Auto-wakeup mode). 200:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 201:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (+) RTC auto-wakeup (AWU) from the Stop and Standby modes 202:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 203:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (++) To wake up from the Stop mode with an RTC alarm event, it is necessary to 204:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** configure the RTC to generate the RTC alarm using the HAL_RTC_SetAlarm_IT() function. 205:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 206:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (++) To wake up from the Stop mode with an RTC Tamper or time stamp event, it 207:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** is necessary to configure the RTC to detect the tamper or time stamp event using the 208:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** HAL_RTC_SetTimeStamp_IT() or HAL_RTC_SetTamper_IT() functions. 209:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 210:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (++) To wake up from the Stop mode with an RTC WakeUp event, it is necessary to 211:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** configure the RTC to generate the RTC WakeUp event using the HAL_RTC_SetWakeUpTimer_IT() 212:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 213:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (+) Comparator auto-wakeup (AWU) from the Stop mode 214:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 215:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (++) To wake up from the Stop mode with a comparator wakeup event, it is necessary to: 216:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (+++) Configure the EXTI Line associated with the comparator (example EXTI Line 22 for c 217:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** to be sensitive to to the selected edges (falling, rising or falling 218:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** and rising) (Interrupt or Event modes) using the EXTI_Init() function. 219:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** (+++) Configure the comparator to generate the event. 220:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** @endverbatim 221:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @{ 222:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** */ ARM GAS /tmp/cc59XfgU.s page 7 223:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 224:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /** 225:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @brief Enables the WakeUp PINx functionality. 226:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @param WakeUpPinx Specifies the Power Wake-Up pin to enable. 227:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * This parameter can be value of : 228:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @ref PWREx_WakeUp_Pins 229:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @retval None 230:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** */ 231:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx) 232:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** { 128 .loc 1 232 0 129 .cfi_startproc 130 @ args = 0, pretend = 0, frame = 0 131 @ frame_needed = 0, uses_anonymous_args = 0 132 @ link register save eliminated. 133 .LVL0: 233:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /* Check the parameters */ 234:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx)); 235:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /* Enable the EWUPx pin */ 236:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** SET_BIT(PWR->CSR, WakeUpPinx); 134 .loc 1 236 0 135 0000 024A ldr r2, .L11 136 0002 5368 ldr r3, [r2, #4] 137 0004 1843 orrs r0, r3 138 .LVL1: 139 0006 5060 str r0, [r2, #4] 237:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** } 140 .loc 1 237 0 141 @ sp needed 142 0008 7047 bx lr 143 .L12: 144 000a C046 .align 2 145 .L11: 146 000c 00700040 .word 1073770496 147 .cfi_endproc 148 .LFE43: 150 .section .text.HAL_PWR_DisableWakeUpPin,"ax",%progbits 151 .align 1 152 .global HAL_PWR_DisableWakeUpPin 153 .syntax unified 154 .code 16 155 .thumb_func 156 .fpu softvfp 158 HAL_PWR_DisableWakeUpPin: 159 .LFB44: 238:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 239:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /** 240:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @brief Disables the WakeUp PINx functionality. 241:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @param WakeUpPinx Specifies the Power Wake-Up pin to disable. 242:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * This parameter can be values of : 243:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @ref PWREx_WakeUp_Pins 244:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @retval None 245:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** */ 246:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx) 247:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** { 160 .loc 1 247 0 161 .cfi_startproc ARM GAS /tmp/cc59XfgU.s page 8 162 @ args = 0, pretend = 0, frame = 0 163 @ frame_needed = 0, uses_anonymous_args = 0 164 @ link register save eliminated. 165 .LVL2: 248:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /* Check the parameters */ 249:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx)); 250:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /* Disable the EWUPx pin */ 251:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** CLEAR_BIT(PWR->CSR, WakeUpPinx); 166 .loc 1 251 0 167 0000 024A ldr r2, .L14 168 0002 5368 ldr r3, [r2, #4] 169 0004 8343 bics r3, r0 170 0006 5360 str r3, [r2, #4] 252:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** } 171 .loc 1 252 0 172 @ sp needed 173 0008 7047 bx lr 174 .L15: 175 000a C046 .align 2 176 .L14: 177 000c 00700040 .word 1073770496 178 .cfi_endproc 179 .LFE44: 181 .section .text.HAL_PWR_EnterSLEEPMode,"ax",%progbits 182 .align 1 183 .global HAL_PWR_EnterSLEEPMode 184 .syntax unified 185 .code 16 186 .thumb_func 187 .fpu softvfp 189 HAL_PWR_EnterSLEEPMode: 190 .LFB45: 253:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 254:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /** 255:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @brief Enters Sleep mode. 256:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @note In Sleep mode, all I/O pins keep the same state as in Run mode. 257:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @param Regulator Specifies the regulator state in SLEEP mode. 258:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * On STM32F0 devices, this parameter is a dummy value and it is ignored 259:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * as regulator can't be modified in this mode. Parameter is kept for platform 260:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * compatibility. 261:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @param SLEEPEntry Specifies if SLEEP mode is entered with WFI or WFE instruction. 262:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * When WFI entry is used, tick interrupt have to be disabled if not desired as 263:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * the interrupt wake up source. 264:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * This parameter can be one of the following values: 265:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @arg PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction 266:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @arg PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction 267:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @retval None 268:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** */ 269:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry) 270:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** { 191 .loc 1 270 0 192 .cfi_startproc 193 @ args = 0, pretend = 0, frame = 0 194 @ frame_needed = 0, uses_anonymous_args = 0 195 @ link register save eliminated. 196 .LVL3: 271:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /* Check the parameters */ ARM GAS /tmp/cc59XfgU.s page 9 272:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** assert_param(IS_PWR_REGULATOR(Regulator)); 273:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry)); 274:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 275:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /* Clear SLEEPDEEP bit of Cortex System Control Register */ 276:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk); 197 .loc 1 276 0 198 0000 064A ldr r2, .L20 199 0002 1369 ldr r3, [r2, #16] 200 0004 0420 movs r0, #4 201 .LVL4: 202 0006 8343 bics r3, r0 203 0008 1361 str r3, [r2, #16] 277:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 278:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /* Select SLEEP mode entry -------------------------------------------------*/ 279:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** if(SLEEPEntry == PWR_SLEEPENTRY_WFI) 204 .loc 1 279 0 205 000a 0129 cmp r1, #1 206 000c 03D0 beq .L19 280:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** { 281:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /* Request Wait For Interrupt */ 282:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** __WFI(); 283:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** } 284:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** else 285:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** { 286:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /* Request Wait For Event */ 287:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** __SEV(); 207 .loc 1 287 0 208 .syntax divided 209 @ 287 "Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c" 1 210 000e 40BF sev 211 @ 0 "" 2 288:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** __WFE(); 212 .loc 1 288 0 213 @ 288 "Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c" 1 214 0010 20BF wfe 215 @ 0 "" 2 289:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** __WFE(); 216 .loc 1 289 0 217 @ 289 "Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c" 1 218 0012 20BF wfe 219 @ 0 "" 2 220 .thumb 221 .syntax unified 222 .L16: 290:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** } 291:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** } 223 .loc 1 291 0 224 @ sp needed 225 0014 7047 bx lr 226 .L19: 282:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** } 227 .loc 1 282 0 228 .syntax divided 229 @ 282 "Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c" 1 230 0016 30BF wfi 231 @ 0 "" 2 232 .thumb ARM GAS /tmp/cc59XfgU.s page 10 233 .syntax unified 234 0018 FCE7 b .L16 235 .L21: 236 001a C046 .align 2 237 .L20: 238 001c 00ED00E0 .word -536810240 239 .cfi_endproc 240 .LFE45: 242 .section .text.HAL_PWR_EnterSTOPMode,"ax",%progbits 243 .align 1 244 .global HAL_PWR_EnterSTOPMode 245 .syntax unified 246 .code 16 247 .thumb_func 248 .fpu softvfp 250 HAL_PWR_EnterSTOPMode: 251 .LFB46: 292:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 293:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /** 294:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @brief Enters STOP mode. 295:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @note In Stop mode, all I/O pins keep the same state as in Run mode. 296:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @note When exiting Stop mode by issuing an interrupt or a wakeup event, 297:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * the HSI RC oscillator is selected as system clock. 298:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @note When the voltage regulator operates in low power mode, an additional 299:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * startup delay is incurred when waking up from Stop mode. 300:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * By keeping the internal regulator ON during Stop mode, the consumption 301:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * is higher although the startup time is reduced. 302:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @param Regulator Specifies the regulator state in STOP mode. 303:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * This parameter can be one of the following values: 304:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @arg PWR_MAINREGULATOR_ON: STOP mode with regulator ON 305:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @arg PWR_LOWPOWERREGULATOR_ON: STOP mode with low power regulator ON 306:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @param STOPEntry specifies if STOP mode in entered with WFI or WFE instruction. 307:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * This parameter can be one of the following values: 308:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @arg PWR_STOPENTRY_WFI:Enter STOP mode with WFI instruction 309:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @arg PWR_STOPENTRY_WFE: Enter STOP mode with WFE instruction 310:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @retval None 311:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** */ 312:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry) 313:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** { 252 .loc 1 313 0 253 .cfi_startproc 254 @ args = 0, pretend = 0, frame = 0 255 @ frame_needed = 0, uses_anonymous_args = 0 256 .LVL5: 257 0000 10B5 push {r4, lr} 258 .LCFI0: 259 .cfi_def_cfa_offset 8 260 .cfi_offset 4, -8 261 .cfi_offset 14, -4 262 .LVL6: 314:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** uint32_t tmpreg = 0; 315:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 316:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /* Check the parameters */ 317:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** assert_param(IS_PWR_REGULATOR(Regulator)); 318:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** assert_param(IS_PWR_STOP_ENTRY(STOPEntry)); 319:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 320:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /* Select the regulator state in STOP mode ---------------------------------*/ ARM GAS /tmp/cc59XfgU.s page 11 321:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** tmpreg = PWR->CR; 263 .loc 1 321 0 264 0002 0C4A ldr r2, .L26 265 0004 1368 ldr r3, [r2] 266 .LVL7: 322:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 323:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /* Clear PDDS and LPDS bits */ 324:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** tmpreg &= (uint32_t)~(PWR_CR_PDDS | PWR_CR_LPDS); 267 .loc 1 324 0 268 0006 0324 movs r4, #3 269 0008 A343 bics r3, r4 270 .LVL8: 325:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 326:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /* Set LPDS bit according to Regulator value */ 327:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** tmpreg |= Regulator; 271 .loc 1 327 0 272 000a 1843 orrs r0, r3 273 .LVL9: 328:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 329:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /* Store the new value */ 330:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** PWR->CR = tmpreg; 274 .loc 1 330 0 275 000c 1060 str r0, [r2] 331:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 332:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /* Set SLEEPDEEP bit of Cortex System Control Register */ 333:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk; 276 .loc 1 333 0 277 000e 0A4A ldr r2, .L26+4 278 0010 1369 ldr r3, [r2, #16] 279 0012 0420 movs r0, #4 280 .LVL10: 281 0014 0343 orrs r3, r0 282 0016 1361 str r3, [r2, #16] 283 .LVL11: 334:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 335:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /* Select STOP mode entry --------------------------------------------------*/ 336:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** if(STOPEntry == PWR_STOPENTRY_WFI) 284 .loc 1 336 0 285 0018 0129 cmp r1, #1 286 001a 08D0 beq .L25 337:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** { 338:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /* Request Wait For Interrupt */ 339:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** __WFI(); 340:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** } 341:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** else 342:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** { 343:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /* Request Wait For Event */ 344:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** __SEV(); 287 .loc 1 344 0 288 .syntax divided 289 @ 344 "Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c" 1 290 001c 40BF sev 291 @ 0 "" 2 345:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** __WFE(); 292 .loc 1 345 0 293 @ 345 "Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c" 1 294 001e 20BF wfe ARM GAS /tmp/cc59XfgU.s page 12 295 @ 0 "" 2 346:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** __WFE(); 296 .loc 1 346 0 297 @ 346 "Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c" 1 298 0020 20BF wfe 299 @ 0 "" 2 300 .thumb 301 .syntax unified 302 .L24: 347:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** } 348:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 349:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /* Reset SLEEPDEEP bit of Cortex System Control Register */ 350:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk); 303 .loc 1 350 0 304 0022 054A ldr r2, .L26+4 305 0024 1369 ldr r3, [r2, #16] 306 0026 0421 movs r1, #4 307 .LVL12: 308 0028 8B43 bics r3, r1 309 002a 1361 str r3, [r2, #16] 351:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** } 310 .loc 1 351 0 311 @ sp needed 312 002c 10BD pop {r4, pc} 313 .LVL13: 314 .L25: 339:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** } 315 .loc 1 339 0 316 .syntax divided 317 @ 339 "Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c" 1 318 002e 30BF wfi 319 @ 0 "" 2 320 .thumb 321 .syntax unified 322 0030 F7E7 b .L24 323 .L27: 324 0032 C046 .align 2 325 .L26: 326 0034 00700040 .word 1073770496 327 0038 00ED00E0 .word -536810240 328 .cfi_endproc 329 .LFE46: 331 .section .text.HAL_PWR_EnterSTANDBYMode,"ax",%progbits 332 .align 1 333 .global HAL_PWR_EnterSTANDBYMode 334 .syntax unified 335 .code 16 336 .thumb_func 337 .fpu softvfp 339 HAL_PWR_EnterSTANDBYMode: 340 .LFB47: 352:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 353:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /** 354:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @brief Enters STANDBY mode. 355:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @note In Standby mode, all I/O pins are high impedance except for: 356:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * - Reset pad (still available) 357:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * - RTC alternate function pins if configured for tamper, time-stamp, RTC ARM GAS /tmp/cc59XfgU.s page 13 358:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * Alarm out, or RTC clock calibration out. 359:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * - WKUP pins if enabled. 360:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * STM32F0x8 devices, the Stop mode is available, but it is 361:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * aningless to distinguish between voltage regulator in Low power 362:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * mode and voltage regulator in Run mode because the regulator 363:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * not used and the core is supplied directly from an external source. 364:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * Consequently, the Standby mode is not available on those devices. 365:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @retval None 366:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** */ 367:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** void HAL_PWR_EnterSTANDBYMode(void) 368:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** { 341 .loc 1 368 0 342 .cfi_startproc 343 @ args = 0, pretend = 0, frame = 0 344 @ frame_needed = 0, uses_anonymous_args = 0 345 @ link register save eliminated. 369:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /* Select STANDBY mode */ 370:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** PWR->CR |= (uint32_t)PWR_CR_PDDS; 346 .loc 1 370 0 347 0000 054A ldr r2, .L29 348 0002 1368 ldr r3, [r2] 349 0004 0221 movs r1, #2 350 0006 0B43 orrs r3, r1 351 0008 1360 str r3, [r2] 371:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 372:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /* Set SLEEPDEEP bit of Cortex System Control Register */ 373:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk; 352 .loc 1 373 0 353 000a 044A ldr r2, .L29+4 354 000c 1369 ldr r3, [r2, #16] 355 000e 0231 adds r1, r1, #2 356 0010 0B43 orrs r3, r1 357 0012 1361 str r3, [r2, #16] 374:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 375:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /* This option is used to ensure that store operations are completed */ 376:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** #if defined ( __CC_ARM) 377:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** __force_stores(); 378:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** #endif 379:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /* Request Wait For Interrupt */ 380:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** __WFI(); 358 .loc 1 380 0 359 .syntax divided 360 @ 380 "Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c" 1 361 0014 30BF wfi 362 @ 0 "" 2 381:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** } 363 .loc 1 381 0 364 .thumb 365 .syntax unified 366 @ sp needed 367 0016 7047 bx lr 368 .L30: 369 .align 2 370 .L29: 371 0018 00700040 .word 1073770496 372 001c 00ED00E0 .word -536810240 373 .cfi_endproc ARM GAS /tmp/cc59XfgU.s page 14 374 .LFE47: 376 .section .text.HAL_PWR_EnableSleepOnExit,"ax",%progbits 377 .align 1 378 .global HAL_PWR_EnableSleepOnExit 379 .syntax unified 380 .code 16 381 .thumb_func 382 .fpu softvfp 384 HAL_PWR_EnableSleepOnExit: 385 .LFB48: 382:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 383:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /** 384:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @brief Indicates Sleep-On-Exit when returning from Handler mode to Thread mode. 385:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor 386:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * re-enters SLEEP mode when an interruption handling is over. 387:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * Setting this bit is useful when the processor is expected to run only on 388:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * interruptions handling. 389:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @retval None 390:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** */ 391:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** void HAL_PWR_EnableSleepOnExit(void) 392:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** { 386 .loc 1 392 0 387 .cfi_startproc 388 @ args = 0, pretend = 0, frame = 0 389 @ frame_needed = 0, uses_anonymous_args = 0 390 @ link register save eliminated. 393:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /* Set SLEEPONEXIT bit of Cortex System Control Register */ 394:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); 391 .loc 1 394 0 392 0000 024A ldr r2, .L32 393 0002 1369 ldr r3, [r2, #16] 394 0004 0221 movs r1, #2 395 0006 0B43 orrs r3, r1 396 0008 1361 str r3, [r2, #16] 395:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** } 397 .loc 1 395 0 398 @ sp needed 399 000a 7047 bx lr 400 .L33: 401 .align 2 402 .L32: 403 000c 00ED00E0 .word -536810240 404 .cfi_endproc 405 .LFE48: 407 .section .text.HAL_PWR_DisableSleepOnExit,"ax",%progbits 408 .align 1 409 .global HAL_PWR_DisableSleepOnExit 410 .syntax unified 411 .code 16 412 .thumb_func 413 .fpu softvfp 415 HAL_PWR_DisableSleepOnExit: 416 .LFB49: 396:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 397:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 398:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /** 399:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @brief Disables Sleep-On-Exit feature when returning from Handler mode to Thread mode. ARM GAS /tmp/cc59XfgU.s page 15 400:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the processor 401:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * re-enters SLEEP mode when an interruption handling is over. 402:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @retval None 403:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** */ 404:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** void HAL_PWR_DisableSleepOnExit(void) 405:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** { 417 .loc 1 405 0 418 .cfi_startproc 419 @ args = 0, pretend = 0, frame = 0 420 @ frame_needed = 0, uses_anonymous_args = 0 421 @ link register save eliminated. 406:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /* Clear SLEEPONEXIT bit of Cortex System Control Register */ 407:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); 422 .loc 1 407 0 423 0000 024A ldr r2, .L35 424 0002 1369 ldr r3, [r2, #16] 425 0004 0221 movs r1, #2 426 0006 8B43 bics r3, r1 427 0008 1361 str r3, [r2, #16] 408:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** } 428 .loc 1 408 0 429 @ sp needed 430 000a 7047 bx lr 431 .L36: 432 .align 2 433 .L35: 434 000c 00ED00E0 .word -536810240 435 .cfi_endproc 436 .LFE49: 438 .section .text.HAL_PWR_EnableSEVOnPend,"ax",%progbits 439 .align 1 440 .global HAL_PWR_EnableSEVOnPend 441 .syntax unified 442 .code 16 443 .thumb_func 444 .fpu softvfp 446 HAL_PWR_EnableSEVOnPend: 447 .LFB50: 409:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 410:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 411:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 412:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /** 413:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @brief Enables CORTEX M4 SEVONPEND bit. 414:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @note Sets SEVONPEND bit of SCR register. When this bit is set, this causes 415:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * WFE to wake up when an interrupt moves from inactive to pended. 416:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @retval None 417:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** */ 418:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** void HAL_PWR_EnableSEVOnPend(void) 419:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** { 448 .loc 1 419 0 449 .cfi_startproc 450 @ args = 0, pretend = 0, frame = 0 451 @ frame_needed = 0, uses_anonymous_args = 0 452 @ link register save eliminated. 420:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /* Set SEVONPEND bit of Cortex System Control Register */ 421:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); 453 .loc 1 421 0 ARM GAS /tmp/cc59XfgU.s page 16 454 0000 024A ldr r2, .L38 455 0002 1369 ldr r3, [r2, #16] 456 0004 1021 movs r1, #16 457 0006 0B43 orrs r3, r1 458 0008 1361 str r3, [r2, #16] 422:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** } 459 .loc 1 422 0 460 @ sp needed 461 000a 7047 bx lr 462 .L39: 463 .align 2 464 .L38: 465 000c 00ED00E0 .word -536810240 466 .cfi_endproc 467 .LFE50: 469 .section .text.HAL_PWR_DisableSEVOnPend,"ax",%progbits 470 .align 1 471 .global HAL_PWR_DisableSEVOnPend 472 .syntax unified 473 .code 16 474 .thumb_func 475 .fpu softvfp 477 HAL_PWR_DisableSEVOnPend: 478 .LFB51: 423:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 424:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** 425:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /** 426:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @brief Disables CORTEX M4 SEVONPEND bit. 427:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @note Clears SEVONPEND bit of SCR register. When this bit is set, this causes 428:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * WFE to wake up when an interrupt moves from inactive to pended. 429:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** * @retval None 430:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** */ 431:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** void HAL_PWR_DisableSEVOnPend(void) 432:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** { 479 .loc 1 432 0 480 .cfi_startproc 481 @ args = 0, pretend = 0, frame = 0 482 @ frame_needed = 0, uses_anonymous_args = 0 483 @ link register save eliminated. 433:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** /* Clear SEVONPEND bit of Cortex System Control Register */ 434:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); 484 .loc 1 434 0 485 0000 024A ldr r2, .L41 486 0002 1369 ldr r3, [r2, #16] 487 0004 1021 movs r1, #16 488 0006 8B43 bics r3, r1 489 0008 1361 str r3, [r2, #16] 435:Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c **** } 490 .loc 1 435 0 491 @ sp needed 492 000a 7047 bx lr 493 .L42: 494 .align 2 495 .L41: 496 000c 00ED00E0 .word -536810240 497 .cfi_endproc 498 .LFE51: ARM GAS /tmp/cc59XfgU.s page 17 500 .text 501 .Letext0: 502 .file 2 "/home/janhenrik/programme/gcc-arm-none-eabi-7-2018-q2-update/arm-none-eabi/include/machin 503 .file 3 "/home/janhenrik/programme/gcc-arm-none-eabi-7-2018-q2-update/arm-none-eabi/include/sys/_s 504 .file 4 "Drivers/CMSIS/Include/core_cm0.h" 505 .file 5 "Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h" 506 .file 6 "Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f072xb.h" 507 .file 7 "Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h" ARM GAS /tmp/cc59XfgU.s page 18 DEFINED SYMBOLS *ABS*:0000000000000000 stm32f0xx_hal_pwr.c /tmp/cc59XfgU.s:16 .text.HAL_PWR_DeInit:0000000000000000 $t /tmp/cc59XfgU.s:23 .text.HAL_PWR_DeInit:0000000000000000 HAL_PWR_DeInit /tmp/cc59XfgU.s:49 .text.HAL_PWR_DeInit:0000000000000018 $d /tmp/cc59XfgU.s:55 .text.HAL_PWR_EnableBkUpAccess:0000000000000000 $t /tmp/cc59XfgU.s:62 .text.HAL_PWR_EnableBkUpAccess:0000000000000000 HAL_PWR_EnableBkUpAccess /tmp/cc59XfgU.s:82 .text.HAL_PWR_EnableBkUpAccess:0000000000000010 $d /tmp/cc59XfgU.s:87 .text.HAL_PWR_DisableBkUpAccess:0000000000000000 $t /tmp/cc59XfgU.s:94 .text.HAL_PWR_DisableBkUpAccess:0000000000000000 HAL_PWR_DisableBkUpAccess /tmp/cc59XfgU.s:113 .text.HAL_PWR_DisableBkUpAccess:000000000000000c $d /tmp/cc59XfgU.s:119 .text.HAL_PWR_EnableWakeUpPin:0000000000000000 $t /tmp/cc59XfgU.s:126 .text.HAL_PWR_EnableWakeUpPin:0000000000000000 HAL_PWR_EnableWakeUpPin /tmp/cc59XfgU.s:146 .text.HAL_PWR_EnableWakeUpPin:000000000000000c $d /tmp/cc59XfgU.s:151 .text.HAL_PWR_DisableWakeUpPin:0000000000000000 $t /tmp/cc59XfgU.s:158 .text.HAL_PWR_DisableWakeUpPin:0000000000000000 HAL_PWR_DisableWakeUpPin /tmp/cc59XfgU.s:177 .text.HAL_PWR_DisableWakeUpPin:000000000000000c $d /tmp/cc59XfgU.s:182 .text.HAL_PWR_EnterSLEEPMode:0000000000000000 $t /tmp/cc59XfgU.s:189 .text.HAL_PWR_EnterSLEEPMode:0000000000000000 HAL_PWR_EnterSLEEPMode /tmp/cc59XfgU.s:238 .text.HAL_PWR_EnterSLEEPMode:000000000000001c $d /tmp/cc59XfgU.s:243 .text.HAL_PWR_EnterSTOPMode:0000000000000000 $t /tmp/cc59XfgU.s:250 .text.HAL_PWR_EnterSTOPMode:0000000000000000 HAL_PWR_EnterSTOPMode /tmp/cc59XfgU.s:326 .text.HAL_PWR_EnterSTOPMode:0000000000000034 $d /tmp/cc59XfgU.s:332 .text.HAL_PWR_EnterSTANDBYMode:0000000000000000 $t /tmp/cc59XfgU.s:339 .text.HAL_PWR_EnterSTANDBYMode:0000000000000000 HAL_PWR_EnterSTANDBYMode /tmp/cc59XfgU.s:371 .text.HAL_PWR_EnterSTANDBYMode:0000000000000018 $d /tmp/cc59XfgU.s:377 .text.HAL_PWR_EnableSleepOnExit:0000000000000000 $t /tmp/cc59XfgU.s:384 .text.HAL_PWR_EnableSleepOnExit:0000000000000000 HAL_PWR_EnableSleepOnExit /tmp/cc59XfgU.s:403 .text.HAL_PWR_EnableSleepOnExit:000000000000000c $d /tmp/cc59XfgU.s:408 .text.HAL_PWR_DisableSleepOnExit:0000000000000000 $t /tmp/cc59XfgU.s:415 .text.HAL_PWR_DisableSleepOnExit:0000000000000000 HAL_PWR_DisableSleepOnExit /tmp/cc59XfgU.s:434 .text.HAL_PWR_DisableSleepOnExit:000000000000000c $d /tmp/cc59XfgU.s:439 .text.HAL_PWR_EnableSEVOnPend:0000000000000000 $t /tmp/cc59XfgU.s:446 .text.HAL_PWR_EnableSEVOnPend:0000000000000000 HAL_PWR_EnableSEVOnPend /tmp/cc59XfgU.s:465 .text.HAL_PWR_EnableSEVOnPend:000000000000000c $d /tmp/cc59XfgU.s:470 .text.HAL_PWR_DisableSEVOnPend:0000000000000000 $t /tmp/cc59XfgU.s:477 .text.HAL_PWR_DisableSEVOnPend:0000000000000000 HAL_PWR_DisableSEVOnPend /tmp/cc59XfgU.s:496 .text.HAL_PWR_DisableSEVOnPend:000000000000000c $d NO UNDEFINED SYMBOLS