From 6ab94e0b318884bbcb95e2ea3835f951502e1d99 Mon Sep 17 00:00:00 2001 From: jaseg Date: Wed, 14 Oct 2020 12:47:28 +0200 Subject: Move firmware into subdirectory --- .../STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_comp.c | 316 --------------------- 1 file changed, 316 deletions(-) delete mode 100644 hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_comp.c (limited to 'hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_comp.c') diff --git a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_comp.c b/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_comp.c deleted file mode 100644 index a108f40..0000000 --- a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_comp.c +++ /dev/null @@ -1,316 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f0xx_ll_comp.c - * @author MCD Application Team - * @brief COMP LL module driver - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -#if defined(USE_FULL_LL_DRIVER) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f0xx_ll_comp.h" - -#ifdef USE_FULL_ASSERT - #include "stm32_assert.h" -#else - #define assert_param(expr) ((void)0U) -#endif - -/** @addtogroup STM32F0xx_LL_Driver - * @{ - */ - -#if defined (COMP1) || defined (COMP2) - -/** @addtogroup COMP_LL COMP - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ - -/** @addtogroup COMP_LL_Private_Macros - * @{ - */ - -/* Check of parameters for configuration of COMP hierarchical scope: */ -/* COMP instance. */ - -#define IS_LL_COMP_POWER_MODE(__POWER_MODE__) \ - ( ((__POWER_MODE__) == LL_COMP_POWERMODE_HIGHSPEED) \ - || ((__POWER_MODE__) == LL_COMP_POWERMODE_MEDIUMSPEED) \ - || ((__POWER_MODE__) == LL_COMP_POWERMODE_LOWPOWER) \ - || ((__POWER_MODE__) == LL_COMP_POWERMODE_ULTRALOWPOWER) \ - ) - -/* Note: On this STM32 serie, comparator input plus parameters are */ -/* the different depending on COMP instances. */ -#define IS_LL_COMP_INPUT_PLUS(__COMP_INSTANCE__, __INPUT_PLUS__) \ - (((__COMP_INSTANCE__) == COMP1) \ - ? ( \ - ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO1) \ - || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_DAC1_CH1) \ - ) \ - : \ - ( \ - ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO1) \ - ) \ - ) - -/* Note: On this STM32 serie, comparator input minus parameters are */ -/* the same on all COMP instances. */ -/* However, comparator instance kept as macro parameter for */ -/* compatibility with other STM32 families. */ -#define IS_LL_COMP_INPUT_MINUS(__COMP_INSTANCE__, __INPUT_MINUS__) \ - ( ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_1_4VREFINT) \ - || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_1_2VREFINT) \ - || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_3_4VREFINT) \ - || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_VREFINT) \ - || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_DAC1_CH1) \ - || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_DAC1_CH2) \ - || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_IO1) \ - ) - -#define IS_LL_COMP_INPUT_HYSTERESIS(__INPUT_HYSTERESIS__) \ - ( ((__INPUT_HYSTERESIS__) == LL_COMP_HYSTERESIS_NONE) \ - || ((__INPUT_HYSTERESIS__) == LL_COMP_HYSTERESIS_LOW) \ - || ((__INPUT_HYSTERESIS__) == LL_COMP_HYSTERESIS_MEDIUM) \ - || ((__INPUT_HYSTERESIS__) == LL_COMP_HYSTERESIS_HIGH) \ - ) - -#define IS_LL_COMP_OUTPUT_SELECTION(__OUTPUT_SELECTION__) \ - ( ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_NONE) \ - || ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_TIM1_BKIN) \ - || ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_TIM1_IC1) \ - || ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_TIM1_OCCLR) \ - || ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_TIM2_IC4) \ - || ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_TIM2_OCCLR) \ - || ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_TIM3_IC1) \ - || ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_TIM3_OCCLR) \ - ) - -#define IS_LL_COMP_OUTPUT_POLARITY(__POLARITY__) \ - ( ((__POLARITY__) == LL_COMP_OUTPUTPOL_NONINVERTED) \ - || ((__POLARITY__) == LL_COMP_OUTPUTPOL_INVERTED) \ - ) - -/** - * @} - */ - - -/* Private function prototypes -----------------------------------------------*/ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup COMP_LL_Exported_Functions - * @{ - */ - -/** @addtogroup COMP_LL_EF_Init - * @{ - */ - -/** - * @brief De-initialize registers of the selected COMP instance - * to their default reset values. - * @note If comparator is locked, de-initialization by software is - * not possible. - * The only way to unlock the comparator is a device hardware reset. - * @param COMPx COMP instance - * @retval An ErrorStatus enumeration value: - * - SUCCESS: COMP registers are de-initialized - * - ERROR: COMP registers are not de-initialized - */ -ErrorStatus LL_COMP_DeInit(COMP_TypeDef *COMPx) -{ - ErrorStatus status = SUCCESS; - - /* Check the parameters */ - assert_param(IS_COMP_ALL_INSTANCE(COMPx)); - - /* Note: Hardware constraint (refer to description of this function): */ - /* COMP instance must not be locked. */ - if(LL_COMP_IsLocked(COMPx) == 0U) - { - /* Note: Connection switch is applicable only to COMP instance COMP1, */ - /* therefore is COMP2 is selected the equivalent bit is */ - /* kept unmodified. */ - if(COMPx == COMP1) - { - CLEAR_BIT(COMP->CSR, - ( COMP_CSR_COMP1MODE - | COMP_CSR_COMP1INSEL - | COMP_CSR_COMP1SW1 - | COMP_CSR_COMP1OUTSEL - | COMP_CSR_COMP1HYST - | COMP_CSR_COMP1POL - | COMP_CSR_COMP1EN - ) << __COMP_BITOFFSET_INSTANCE(COMPx) - ); - } - else - { - CLEAR_BIT(COMP->CSR, - ( COMP_CSR_COMP1MODE - | COMP_CSR_COMP1INSEL - | COMP_CSR_COMP1OUTSEL - | COMP_CSR_COMP1HYST - | COMP_CSR_COMP1POL - | COMP_CSR_COMP1EN - ) << __COMP_BITOFFSET_INSTANCE(COMPx) - ); - } - - } - else - { - /* Comparator instance is locked: de-initialization by software is */ - /* not possible. */ - /* The only way to unlock the comparator is a device hardware reset. */ - status = ERROR; - } - - return status; -} - -/** - * @brief Initialize some features of COMP instance. - * @note This function configures features of the selected COMP instance. - * Some features are also available at scope COMP common instance - * (common to several COMP instances). - * Refer to functions having argument "COMPxy_COMMON" as parameter. - * @param COMPx COMP instance - * @param COMP_InitStruct Pointer to a @ref LL_COMP_InitTypeDef structure - * @retval An ErrorStatus enumeration value: - * - SUCCESS: COMP registers are initialized - * - ERROR: COMP registers are not initialized - */ -ErrorStatus LL_COMP_Init(COMP_TypeDef *COMPx, LL_COMP_InitTypeDef *COMP_InitStruct) -{ - ErrorStatus status = SUCCESS; - - /* Check the parameters */ - assert_param(IS_COMP_ALL_INSTANCE(COMPx)); - assert_param(IS_LL_COMP_POWER_MODE(COMP_InitStruct->PowerMode)); - assert_param(IS_LL_COMP_INPUT_PLUS(COMPx, COMP_InitStruct->InputPlus)); - assert_param(IS_LL_COMP_INPUT_MINUS(COMPx, COMP_InitStruct->InputMinus)); - assert_param(IS_LL_COMP_INPUT_HYSTERESIS(COMP_InitStruct->InputHysteresis)); - assert_param(IS_LL_COMP_OUTPUT_SELECTION(COMP_InitStruct->OutputSelection)); - assert_param(IS_LL_COMP_OUTPUT_POLARITY(COMP_InitStruct->OutputPolarity)); - - /* Note: Hardware constraint (refer to description of this function) */ - /* COMP instance must not be locked. */ - if(LL_COMP_IsLocked(COMPx) == 0U) - { - /* Configuration of comparator instance : */ - /* - PowerMode */ - /* - InputPlus */ - /* - InputMinus */ - /* - InputHysteresis */ - /* - OutputSelection */ - /* - OutputPolarity */ - /* Note: Connection switch is applicable only to COMP instance COMP1, */ - /* therefore is COMP2 is selected the equivalent bit is */ - /* kept unmodified. */ - if(COMPx == COMP1) - { - MODIFY_REG(COMP->CSR, - ( COMP_CSR_COMP1MODE - | COMP_CSR_COMP1INSEL - | COMP_CSR_COMP1SW1 - | COMP_CSR_COMP1OUTSEL - | COMP_CSR_COMP1HYST - | COMP_CSR_COMP1POL - ) << __COMP_BITOFFSET_INSTANCE(COMPx) - , - ( COMP_InitStruct->PowerMode - | COMP_InitStruct->InputPlus - | COMP_InitStruct->InputMinus - | COMP_InitStruct->InputHysteresis - | COMP_InitStruct->OutputSelection - | COMP_InitStruct->OutputPolarity - ) << __COMP_BITOFFSET_INSTANCE(COMPx) - ); - } - else - { - MODIFY_REG(COMP->CSR, - ( COMP_CSR_COMP1MODE - | COMP_CSR_COMP1INSEL - | COMP_CSR_COMP1OUTSEL - | COMP_CSR_COMP1HYST - | COMP_CSR_COMP1POL - ) << __COMP_BITOFFSET_INSTANCE(COMPx) - , - ( COMP_InitStruct->PowerMode - | COMP_InitStruct->InputPlus - | COMP_InitStruct->InputMinus - | COMP_InitStruct->InputHysteresis - | COMP_InitStruct->OutputSelection - | COMP_InitStruct->OutputPolarity - ) << __COMP_BITOFFSET_INSTANCE(COMPx) - ); - } - - } - else - { - /* Initialization error: COMP instance is locked. */ - status = ERROR; - } - - return status; -} - -/** - * @brief Set each @ref LL_COMP_InitTypeDef field to default value. - * @param COMP_InitStruct pointer to a @ref LL_COMP_InitTypeDef structure - * whose fields will be set to default values. - * @retval None - */ -void LL_COMP_StructInit(LL_COMP_InitTypeDef *COMP_InitStruct) -{ - /* Set COMP_InitStruct fields to default values */ - COMP_InitStruct->PowerMode = LL_COMP_POWERMODE_ULTRALOWPOWER; - COMP_InitStruct->InputPlus = LL_COMP_INPUT_PLUS_IO1; - COMP_InitStruct->InputMinus = LL_COMP_INPUT_MINUS_VREFINT; - COMP_InitStruct->InputHysteresis = LL_COMP_HYSTERESIS_NONE; - COMP_InitStruct->OutputSelection = LL_COMP_OUTPUT_NONE; - COMP_InitStruct->OutputPolarity = LL_COMP_OUTPUTPOL_NONINVERTED; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* COMP1 || COMP2 */ - -/** - * @} - */ - -#endif /* USE_FULL_LL_DRIVER */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit