From 6ab94e0b318884bbcb95e2ea3835f951502e1d99 Mon Sep 17 00:00:00 2001 From: jaseg Date: Wed, 14 Oct 2020 12:47:28 +0200 Subject: Move firmware into subdirectory --- .../Src/stm32f0xx_hal_smartcard.c | 2873 -------------------- 1 file changed, 2873 deletions(-) delete mode 100644 hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_smartcard.c (limited to 'hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_smartcard.c') diff --git a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_smartcard.c b/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_smartcard.c deleted file mode 100644 index 4674aef..0000000 --- a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_smartcard.c +++ /dev/null @@ -1,2873 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f0xx_hal_smartcard.c - * @author MCD Application Team - * @brief SMARTCARD HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the SMARTCARD peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral Control functions - * + Peripheral State and Error functions - * - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The SMARTCARD HAL driver can be used as follows: - - (#) Declare a SMARTCARD_HandleTypeDef handle structure (eg. SMARTCARD_HandleTypeDef hsmartcard). - (#) Associate a USART to the SMARTCARD handle hsmartcard. - (#) Initialize the SMARTCARD low level resources by implementing the HAL_SMARTCARD_MspInit() API: - (++) Enable the USARTx interface clock. - (++) USART pins configuration: - (+++) Enable the clock for the USART GPIOs. - (+++) Configure the USART pins (TX as alternate function pull-up, RX as alternate function Input). - (++) NVIC configuration if you need to use interrupt process (HAL_SMARTCARD_Transmit_IT() - and HAL_SMARTCARD_Receive_IT() APIs): - (+++) Configure the USARTx interrupt priority. - (+++) Enable the NVIC USART IRQ handle. - (++) DMA Configuration if you need to use DMA process (HAL_SMARTCARD_Transmit_DMA() - and HAL_SMARTCARD_Receive_DMA() APIs): - (+++) Declare a DMA handle structure for the Tx/Rx channel. - (+++) Enable the DMAx interface clock. - (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. - (+++) Configure the DMA Tx/Rx channel. - (+++) Associate the initialized DMA handle to the SMARTCARD DMA Tx/Rx handle. - (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx channel. - - (#) Program the Baud Rate, Parity, Mode(Receiver/Transmitter), clock enabling/disabling and accordingly, - the clock parameters (parity, phase, last bit), prescaler value, guard time and NACK on transmission - error enabling or disabling in the hsmartcard handle Init structure. - - (#) If required, program SMARTCARD advanced features (TX/RX pins swap, TimeOut, auto-retry counter,...) - in the hsmartcard handle AdvancedInit structure. - - (#) Initialize the SMARTCARD registers by calling the HAL_SMARTCARD_Init() API: - (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) - by calling the customized HAL_SMARTCARD_MspInit() API. - [..] - (@) The specific SMARTCARD interrupts (Transmission complete interrupt, - RXNE interrupt and Error Interrupts) will be managed using the macros - __HAL_SMARTCARD_ENABLE_IT() and __HAL_SMARTCARD_DISABLE_IT() inside the transmit and receive process. - - [..] - [..] Three operation modes are available within this driver : - - *** Polling mode IO operation *** - ================================= - [..] - (+) Send an amount of data in blocking mode using HAL_SMARTCARD_Transmit() - (+) Receive an amount of data in blocking mode using HAL_SMARTCARD_Receive() - - *** Interrupt mode IO operation *** - =================================== - [..] - (+) Send an amount of data in non-blocking mode using HAL_SMARTCARD_Transmit_IT() - (+) At transmission end of transfer HAL_SMARTCARD_TxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_SMARTCARD_TxCpltCallback() - (+) Receive an amount of data in non-blocking mode using HAL_SMARTCARD_Receive_IT() - (+) At reception end of transfer HAL_SMARTCARD_RxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback() - (+) In case of transfer Error, HAL_SMARTCARD_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_SMARTCARD_ErrorCallback() - - *** DMA mode IO operation *** - ============================== - [..] - (+) Send an amount of data in non-blocking mode (DMA) using HAL_SMARTCARD_Transmit_DMA() - (+) At transmission end of transfer HAL_SMARTCARD_TxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_SMARTCARD_TxCpltCallback() - (+) Receive an amount of data in non-blocking mode (DMA) using HAL_SMARTCARD_Receive_DMA() - (+) At reception end of transfer HAL_SMARTCARD_RxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback() - (+) In case of transfer Error, HAL_SMARTCARD_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_SMARTCARD_ErrorCallback() - - *** SMARTCARD HAL driver macros list *** - ======================================== - [..] - Below the list of most used macros in SMARTCARD HAL driver. - - (+) __HAL_SMARTCARD_GET_FLAG : Check whether or not the specified SMARTCARD flag is set - (+) __HAL_SMARTCARD_CLEAR_FLAG : Clear the specified SMARTCARD pending flag - (+) __HAL_SMARTCARD_ENABLE_IT: Enable the specified SMARTCARD interrupt - (+) __HAL_SMARTCARD_DISABLE_IT: Disable the specified SMARTCARD interrupt - (+) __HAL_SMARTCARD_GET_IT_SOURCE: Check whether or not the specified SMARTCARD interrupt is enabled - - [..] - (@) You can refer to the SMARTCARD HAL driver header file for more useful macros - - ##### Callback registration ##### - ================================== - - [..] - The compilation define USE_HAL_SMARTCARD_REGISTER_CALLBACKS when set to 1 - allows the user to configure dynamically the driver callbacks. - - [..] - Use Function @ref HAL_SMARTCARD_RegisterCallback() to register a user callback. - Function @ref HAL_SMARTCARD_RegisterCallback() allows to register following callbacks: - (+) TxCpltCallback : Tx Complete Callback. - (+) RxCpltCallback : Rx Complete Callback. - (+) ErrorCallback : Error Callback. - (+) AbortCpltCallback : Abort Complete Callback. - (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. - (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. - (+) MspInitCallback : SMARTCARD MspInit. - (+) MspDeInitCallback : SMARTCARD MspDeInit. - This function takes as parameters the HAL peripheral handle, the Callback ID - and a pointer to the user callback function. - - [..] - Use function @ref HAL_SMARTCARD_UnRegisterCallback() to reset a callback to the default - weak (surcharged) function. - @ref HAL_SMARTCARD_UnRegisterCallback() takes as parameters the HAL peripheral handle, - and the Callback ID. - This function allows to reset following callbacks: - (+) TxCpltCallback : Tx Complete Callback. - (+) RxCpltCallback : Rx Complete Callback. - (+) ErrorCallback : Error Callback. - (+) AbortCpltCallback : Abort Complete Callback. - (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. - (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. - (+) MspInitCallback : SMARTCARD MspInit. - (+) MspDeInitCallback : SMARTCARD MspDeInit. - - [..] - By default, after the @ref HAL_SMARTCARD_Init() and when the state is HAL_SMARTCARD_STATE_RESET - all callbacks are set to the corresponding weak (surcharged) functions: - examples @ref HAL_SMARTCARD_TxCpltCallback(), @ref HAL_SMARTCARD_RxCpltCallback(). - Exception done for MspInit and MspDeInit functions that are respectively - reset to the legacy weak (surcharged) functions in the @ref HAL_SMARTCARD_Init() - and @ref HAL_SMARTCARD_DeInit() only when these callbacks are null (not registered beforehand). - If not, MspInit or MspDeInit are not null, the @ref HAL_SMARTCARD_Init() and @ref HAL_SMARTCARD_DeInit() - keep and use the user MspInit/MspDeInit callbacks (registered beforehand). - - [..] - Callbacks can be registered/unregistered in HAL_SMARTCARD_STATE_READY state only. - Exception done MspInit/MspDeInit that can be registered/unregistered - in HAL_SMARTCARD_STATE_READY or HAL_SMARTCARD_STATE_RESET state, thus registered (user) - MspInit/DeInit callbacks can be used during the Init/DeInit. - In that case first register the MspInit/MspDeInit user callbacks - using @ref HAL_SMARTCARD_RegisterCallback() before calling @ref HAL_SMARTCARD_DeInit() - or @ref HAL_SMARTCARD_Init() function. - - [..] - When The compilation define USE_HAL_SMARTCARD_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registration feature is not available - and weak (surcharged) callbacks are used. - - - @endverbatim - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ -#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) -/* Includes ------------------------------------------------------------------*/ -#include "stm32f0xx_hal.h" - -/** @addtogroup STM32F0xx_HAL_Driver - * @{ - */ - -/** @defgroup SMARTCARD SMARTCARD - * @brief HAL SMARTCARD module driver - * @{ - */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @defgroup SMARTCARD_Private_Constants SMARTCARD Private Constants - * @{ - */ -#define SMARTCARD_TEACK_REACK_TIMEOUT 1000U /*!< SMARTCARD TX or RX enable acknowledge time-out value */ - -#define USART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | \ - USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8)) /*!< USART CR1 fields of parameters set by SMARTCARD_SetConfig API */ - -#define USART_CR2_CLK_FIELDS ((uint32_t)(USART_CR2_CLKEN | USART_CR2_CPOL | USART_CR2_CPHA | \ - USART_CR2_LBCL)) /*!< SMARTCARD clock-related USART CR2 fields of parameters */ - -#define USART_CR2_FIELDS ((uint32_t)(USART_CR2_RTOEN | USART_CR2_CLK_FIELDS | USART_CR2_STOP)) /*!< USART CR2 fields of parameters set by SMARTCARD_SetConfig API */ - -#define USART_CR3_FIELDS ((uint32_t)(USART_CR3_ONEBIT | USART_CR3_NACK | USART_CR3_SCARCNT)) /*!< USART CR3 fields of parameters set by SMARTCARD_SetConfig API */ - -#define USART_BRR_MIN 0x10U /*!< USART BRR minimum authorized value */ - -#define USART_BRR_MAX 0x0000FFFFU /*!< USART BRR maximum authorized value */ -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @addtogroup SMARTCARD_Private_Functions - * @{ - */ -#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) -void SMARTCARD_InitCallbacksToDefault(SMARTCARD_HandleTypeDef *hsmartcard); -#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ -static HAL_StatusTypeDef SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsmartcard); -static void SMARTCARD_AdvFeatureConfig(SMARTCARD_HandleTypeDef *hsmartcard); -static HAL_StatusTypeDef SMARTCARD_CheckIdleState(SMARTCARD_HandleTypeDef *hsmartcard); -static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Flag, - FlagStatus Status, uint32_t Tickstart, uint32_t Timeout); -static void SMARTCARD_EndTxTransfer(SMARTCARD_HandleTypeDef *hsmartcard); -static void SMARTCARD_EndRxTransfer(SMARTCARD_HandleTypeDef *hsmartcard); -static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma); -static void SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef *hdma); -static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma); -static void SMARTCARD_DMAAbortOnError(DMA_HandleTypeDef *hdma); -static void SMARTCARD_DMATxAbortCallback(DMA_HandleTypeDef *hdma); -static void SMARTCARD_DMARxAbortCallback(DMA_HandleTypeDef *hdma); -static void SMARTCARD_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma); -static void SMARTCARD_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma); -static void SMARTCARD_TxISR(SMARTCARD_HandleTypeDef *hsmartcard); -static void SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard); -static void SMARTCARD_RxISR(SMARTCARD_HandleTypeDef *hsmartcard); -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup SMARTCARD_Exported_Functions SMARTCARD Exported Functions - * @{ - */ - -/** @defgroup SMARTCARD_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - ============================================================================== - ##### Initialization and Configuration functions ##### - ============================================================================== - [..] - This subsection provides a set of functions allowing to initialize the USARTx - associated to the SmartCard. - (+) These parameters can be configured: - (++) Baud Rate - (++) Parity: parity should be enabled, frame Length is fixed to 8 bits plus parity - (++) Receiver/transmitter modes - (++) Synchronous mode (and if enabled, phase, polarity and last bit parameters) - (++) Prescaler value - (++) Guard bit time - (++) NACK enabling or disabling on transmission error - - (+) The following advanced features can be configured as well: - (++) TX and/or RX pin level inversion - (++) data logical level inversion - (++) RX and TX pins swap - (++) RX overrun detection disabling - (++) DMA disabling on RX error - (++) MSB first on communication line - (++) Time out enabling (and if activated, timeout value) - (++) Block length - (++) Auto-retry counter - [..] - The HAL_SMARTCARD_Init() API follows the USART synchronous configuration procedures - (details for the procedures are available in reference manual). - -@endverbatim - - The USART frame format is given in the following table: - - Table 1. USART frame format. - +---------------------------------------------------------------+ - | M1M0 bits | PCE bit | USART frame | - |-----------------------|---------------------------------------| - | 01 | 1 | | SB | 8 bit data | PB | STB | | - +---------------------------------------------------------------+ - - - * @{ - */ - -/** - * @brief Initialize the SMARTCARD mode according to the specified - * parameters in the SMARTCARD_HandleTypeDef and initialize the associated handle. - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsmartcard) -{ - /* Check the SMARTCARD handle allocation */ - if (hsmartcard == NULL) - { - return HAL_ERROR; - } - - /* Check the USART associated to the SMARTCARD handle */ - assert_param(IS_SMARTCARD_INSTANCE(hsmartcard->Instance)); - - if (hsmartcard->gState == HAL_SMARTCARD_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hsmartcard->Lock = HAL_UNLOCKED; - -#if USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1 - SMARTCARD_InitCallbacksToDefault(hsmartcard); - - if (hsmartcard->MspInitCallback == NULL) - { - hsmartcard->MspInitCallback = HAL_SMARTCARD_MspInit; - } - - /* Init the low level hardware */ - hsmartcard->MspInitCallback(hsmartcard); -#else - /* Init the low level hardware : GPIO, CLOCK */ - HAL_SMARTCARD_MspInit(hsmartcard); -#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ - } - - hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; - - /* Disable the Peripheral to set smartcard mode */ - CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); - - /* In SmartCard mode, the following bits must be kept cleared: - - LINEN in the USART_CR2 register, - - HDSEL and IREN bits in the USART_CR3 register.*/ - CLEAR_BIT(hsmartcard->Instance->CR2, USART_CR2_LINEN); - CLEAR_BIT(hsmartcard->Instance->CR3, (USART_CR3_HDSEL | USART_CR3_IREN)); - - /* set the USART in SMARTCARD mode */ - SET_BIT(hsmartcard->Instance->CR3, USART_CR3_SCEN); - - /* Set the SMARTCARD Communication parameters */ - if (SMARTCARD_SetConfig(hsmartcard) == HAL_ERROR) - { - return HAL_ERROR; - } - - /* Set the SMARTCARD transmission completion indication */ - SMARTCARD_TRANSMISSION_COMPLETION_SETTING(hsmartcard); - - if (hsmartcard->AdvancedInit.AdvFeatureInit != SMARTCARD_ADVFEATURE_NO_INIT) - { - SMARTCARD_AdvFeatureConfig(hsmartcard); - } - - /* Enable the Peripheral */ - SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); - - /* TEACK and/or REACK to check before moving hsmartcard->gState and hsmartcard->RxState to Ready */ - return (SMARTCARD_CheckIdleState(hsmartcard)); -} - -/** - * @brief DeInitialize the SMARTCARD peripheral. - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsmartcard) -{ - /* Check the SMARTCARD handle allocation */ - if (hsmartcard == NULL) - { - return HAL_ERROR; - } - - /* Check the USART/UART associated to the SMARTCARD handle */ - assert_param(IS_SMARTCARD_INSTANCE(hsmartcard->Instance)); - - hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; - - /* Disable the Peripheral */ - CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); - - WRITE_REG(hsmartcard->Instance->CR1, 0x0U); - WRITE_REG(hsmartcard->Instance->CR2, 0x0U); - WRITE_REG(hsmartcard->Instance->CR3, 0x0U); - WRITE_REG(hsmartcard->Instance->RTOR, 0x0U); - WRITE_REG(hsmartcard->Instance->GTPR, 0x0U); - - /* DeInit the low level hardware */ -#if USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1 - if (hsmartcard->MspDeInitCallback == NULL) - { - hsmartcard->MspDeInitCallback = HAL_SMARTCARD_MspDeInit; - } - /* DeInit the low level hardware */ - hsmartcard->MspDeInitCallback(hsmartcard); -#else - HAL_SMARTCARD_MspDeInit(hsmartcard); -#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ - - hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; - hsmartcard->gState = HAL_SMARTCARD_STATE_RESET; - hsmartcard->RxState = HAL_SMARTCARD_STATE_RESET; - - /* Process Unlock */ - __HAL_UNLOCK(hsmartcard); - - return HAL_OK; -} - -/** - * @brief Initialize the SMARTCARD MSP. - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @retval None - */ -__weak void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsmartcard) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hsmartcard); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SMARTCARD_MspInit can be implemented in the user file - */ -} - -/** - * @brief DeInitialize the SMARTCARD MSP. - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @retval None - */ -__weak void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsmartcard) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hsmartcard); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SMARTCARD_MspDeInit can be implemented in the user file - */ -} - -#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) -/** - * @brief Register a User SMARTCARD Callback - * To be used instead of the weak predefined callback - * @param hsmartcard smartcard handle - * @param CallbackID ID of the callback to be registered - * This parameter can be one of the following values: - * @arg @ref HAL_SMARTCARD_TX_COMPLETE_CB_ID Tx Complete Callback ID - * @arg @ref HAL_SMARTCARD_RX_COMPLETE_CB_ID Rx Complete Callback ID - * @arg @ref HAL_SMARTCARD_ERROR_CB_ID Error Callback ID - * @arg @ref HAL_SMARTCARD_ABORT_COMPLETE_CB_ID Abort Complete Callback ID - * @arg @ref HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID - * @arg @ref HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID - * @arg @ref HAL_SMARTCARD_MSPINIT_CB_ID MspInit Callback ID - * @arg @ref HAL_SMARTCARD_MSPDEINIT_CB_ID MspDeInit Callback ID - * @param pCallback pointer to the Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SMARTCARD_RegisterCallback(SMARTCARD_HandleTypeDef *hsmartcard, - HAL_SMARTCARD_CallbackIDTypeDef CallbackID, pSMARTCARD_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(hsmartcard); - - if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) - { - switch (CallbackID) - { - - case HAL_SMARTCARD_TX_COMPLETE_CB_ID : - hsmartcard->TxCpltCallback = pCallback; - break; - - case HAL_SMARTCARD_RX_COMPLETE_CB_ID : - hsmartcard->RxCpltCallback = pCallback; - break; - - case HAL_SMARTCARD_ERROR_CB_ID : - hsmartcard->ErrorCallback = pCallback; - break; - - case HAL_SMARTCARD_ABORT_COMPLETE_CB_ID : - hsmartcard->AbortCpltCallback = pCallback; - break; - - case HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID : - hsmartcard->AbortTransmitCpltCallback = pCallback; - break; - - case HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID : - hsmartcard->AbortReceiveCpltCallback = pCallback; - break; - - - case HAL_SMARTCARD_MSPINIT_CB_ID : - hsmartcard->MspInitCallback = pCallback; - break; - - case HAL_SMARTCARD_MSPDEINIT_CB_ID : - hsmartcard->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (hsmartcard->gState == HAL_SMARTCARD_STATE_RESET) - { - switch (CallbackID) - { - case HAL_SMARTCARD_MSPINIT_CB_ID : - hsmartcard->MspInitCallback = pCallback; - break; - - case HAL_SMARTCARD_MSPDEINIT_CB_ID : - hsmartcard->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hsmartcard); - - return status; -} - -/** - * @brief Unregister an SMARTCARD callback - * SMARTCARD callback is redirected to the weak predefined callback - * @param hsmartcard smartcard handle - * @param CallbackID ID of the callback to be unregistered - * This parameter can be one of the following values: - * @arg @ref HAL_SMARTCARD_TX_COMPLETE_CB_ID Tx Complete Callback ID - * @arg @ref HAL_SMARTCARD_RX_COMPLETE_CB_ID Rx Complete Callback ID - * @arg @ref HAL_SMARTCARD_ERROR_CB_ID Error Callback ID - * @arg @ref HAL_SMARTCARD_ABORT_COMPLETE_CB_ID Abort Complete Callback ID - * @arg @ref HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID - * @arg @ref HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID - * @arg @ref HAL_SMARTCARD_MSPINIT_CB_ID MspInit Callback ID - * @arg @ref HAL_SMARTCARD_MSPDEINIT_CB_ID MspDeInit Callback ID - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SMARTCARD_UnRegisterCallback(SMARTCARD_HandleTypeDef *hsmartcard, - HAL_SMARTCARD_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hsmartcard); - - if (HAL_SMARTCARD_STATE_READY == hsmartcard->gState) - { - switch (CallbackID) - { - case HAL_SMARTCARD_TX_COMPLETE_CB_ID : - hsmartcard->TxCpltCallback = HAL_SMARTCARD_TxCpltCallback; /* Legacy weak TxCpltCallback */ - break; - - case HAL_SMARTCARD_RX_COMPLETE_CB_ID : - hsmartcard->RxCpltCallback = HAL_SMARTCARD_RxCpltCallback; /* Legacy weak RxCpltCallback */ - break; - - case HAL_SMARTCARD_ERROR_CB_ID : - hsmartcard->ErrorCallback = HAL_SMARTCARD_ErrorCallback; /* Legacy weak ErrorCallback */ - break; - - case HAL_SMARTCARD_ABORT_COMPLETE_CB_ID : - hsmartcard->AbortCpltCallback = HAL_SMARTCARD_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ - break; - - case HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID : - hsmartcard->AbortTransmitCpltCallback = HAL_SMARTCARD_AbortTransmitCpltCallback; /* Legacy weak AbortTransmitCpltCallback */ - break; - - case HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID : - hsmartcard->AbortReceiveCpltCallback = HAL_SMARTCARD_AbortReceiveCpltCallback; /* Legacy weak AbortReceiveCpltCallback */ - break; - - - case HAL_SMARTCARD_MSPINIT_CB_ID : - hsmartcard->MspInitCallback = HAL_SMARTCARD_MspInit; /* Legacy weak MspInitCallback */ - break; - - case HAL_SMARTCARD_MSPDEINIT_CB_ID : - hsmartcard->MspDeInitCallback = HAL_SMARTCARD_MspDeInit; /* Legacy weak MspDeInitCallback */ - break; - - default : - /* Update the error code */ - hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_SMARTCARD_STATE_RESET == hsmartcard->gState) - { - switch (CallbackID) - { - case HAL_SMARTCARD_MSPINIT_CB_ID : - hsmartcard->MspInitCallback = HAL_SMARTCARD_MspInit; - break; - - case HAL_SMARTCARD_MSPDEINIT_CB_ID : - hsmartcard->MspDeInitCallback = HAL_SMARTCARD_MspDeInit; - break; - - default : - /* Update the error code */ - hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hsmartcard); - - return status; -} -#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup SMARTCARD_Exported_Functions_Group2 IO operation functions - * @brief SMARTCARD Transmit and Receive functions - * -@verbatim - ============================================================================== - ##### IO operation functions ##### - ============================================================================== - [..] - This subsection provides a set of functions allowing to manage the SMARTCARD data transfers. - - [..] - Smartcard is a single wire half duplex communication protocol. - The Smartcard interface is designed to support asynchronous protocol Smartcards as - defined in the ISO 7816-3 standard. The USART should be configured as: - (+) 8 bits plus parity: where M=1 and PCE=1 in the USART_CR1 register - (+) 1.5 stop bits when transmitting and receiving: where STOP=11 in the USART_CR2 register. - - [..] - (+) There are two modes of transfer: - (++) Blocking mode: The communication is performed in polling mode. - The HAL status of all data processing is returned by the same function - after finishing transfer. - (++) Non-Blocking mode: The communication is performed using Interrupts - or DMA, the relevant API's return the HAL status. - The end of the data processing will be indicated through the - dedicated SMARTCARD IRQ when using Interrupt mode or the DMA IRQ when - using DMA mode. - (++) The HAL_SMARTCARD_TxCpltCallback(), HAL_SMARTCARD_RxCpltCallback() user callbacks - will be executed respectively at the end of the Transmit or Receive process - The HAL_SMARTCARD_ErrorCallback() user callback will be executed when a communication - error is detected. - - (+) Blocking mode APIs are : - (++) HAL_SMARTCARD_Transmit() - (++) HAL_SMARTCARD_Receive() - - (+) Non Blocking mode APIs with Interrupt are : - (++) HAL_SMARTCARD_Transmit_IT() - (++) HAL_SMARTCARD_Receive_IT() - (++) HAL_SMARTCARD_IRQHandler() - - (+) Non Blocking mode functions with DMA are : - (++) HAL_SMARTCARD_Transmit_DMA() - (++) HAL_SMARTCARD_Receive_DMA() - - (+) A set of Transfer Complete Callbacks are provided in non Blocking mode: - (++) HAL_SMARTCARD_TxCpltCallback() - (++) HAL_SMARTCARD_RxCpltCallback() - (++) HAL_SMARTCARD_ErrorCallback() - - [..] - (#) Non-Blocking mode transfers could be aborted using Abort API's : - (++) HAL_SMARTCARD_Abort() - (++) HAL_SMARTCARD_AbortTransmit() - (++) HAL_SMARTCARD_AbortReceive() - (++) HAL_SMARTCARD_Abort_IT() - (++) HAL_SMARTCARD_AbortTransmit_IT() - (++) HAL_SMARTCARD_AbortReceive_IT() - - (#) For Abort services based on interrupts (HAL_SMARTCARD_Abortxxx_IT), a set of Abort Complete Callbacks are provided: - (++) HAL_SMARTCARD_AbortCpltCallback() - (++) HAL_SMARTCARD_AbortTransmitCpltCallback() - (++) HAL_SMARTCARD_AbortReceiveCpltCallback() - - (#) In Non-Blocking mode transfers, possible errors are split into 2 categories. - Errors are handled as follows : - (++) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is - to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error in Interrupt mode reception . - Received character is then retrieved and stored in Rx buffer, Error code is set to allow user to identify error type, - and HAL_SMARTCARD_ErrorCallback() user callback is executed. Transfer is kept ongoing on SMARTCARD side. - If user wants to abort it, Abort services should be called by user. - (++) Error is considered as Blocking : Transfer could not be completed properly and is aborted. - This concerns Frame Error in Interrupt mode tranmission, Overrun Error in Interrupt mode reception and all errors in DMA mode. - Error code is set to allow user to identify error type, and HAL_SMARTCARD_ErrorCallback() user callback is executed. - -@endverbatim - * @{ - */ - -/** - * @brief Send an amount of data in blocking mode. - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @param pData pointer to data buffer. - * @param Size amount of data to be sent. - * @param Timeout Timeout duration. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, - uint32_t Timeout) -{ - uint32_t tickstart; - uint8_t *ptmpdata = pData; - - /* Check that a Tx process is not already ongoing */ - if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) - { - if ((ptmpdata == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hsmartcard); - - hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY_TX; - - /* Init tickstart for timeout management */ - tickstart = HAL_GetTick(); - - /* Disable the Peripheral first to update mode for TX master */ - CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); - - /* Disable Rx, enable Tx */ - CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RE); - SET_BIT(hsmartcard->Instance->RQR, (uint16_t)SMARTCARD_RXDATA_FLUSH_REQUEST); - SET_BIT(hsmartcard->Instance->CR1, USART_CR1_TE); - - /* Enable the Peripheral */ - SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); - - hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; - hsmartcard->TxXferSize = Size; - hsmartcard->TxXferCount = Size; - - while (hsmartcard->TxXferCount > 0U) - { - hsmartcard->TxXferCount--; - if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, SMARTCARD_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - hsmartcard->Instance->TDR = (uint8_t)(*ptmpdata & 0xFFU); - ptmpdata++; - } - if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, SMARTCARD_TRANSMISSION_COMPLETION_FLAG(hsmartcard), RESET, tickstart, - Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - /* Re-enable Rx at end of transmission if initial mode is Rx/Tx */ - if (hsmartcard->Init.Mode == SMARTCARD_MODE_TX_RX) - { - /* Disable the Peripheral first to update modes */ - CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); - SET_BIT(hsmartcard->Instance->CR1, USART_CR1_RE); - /* Enable the Peripheral */ - SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); - } - - /* At end of Tx process, restore hsmartcard->gState to Ready */ - hsmartcard->gState = HAL_SMARTCARD_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hsmartcard); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive an amount of data in blocking mode. - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @param pData pointer to data buffer. - * @param Size amount of data to be received. - * @param Timeout Timeout duration. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, - uint32_t Timeout) -{ - uint32_t tickstart; - uint8_t *ptmpdata = pData; - - /* Check that a Rx process is not already ongoing */ - if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY) - { - if ((ptmpdata == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hsmartcard); - - hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; - hsmartcard->RxState = HAL_SMARTCARD_STATE_BUSY_RX; - - /* Init tickstart for timeout management */ - tickstart = HAL_GetTick(); - - hsmartcard->RxXferSize = Size; - hsmartcard->RxXferCount = Size; - - /* Check the remain data to be received */ - while (hsmartcard->RxXferCount > 0U) - { - hsmartcard->RxXferCount--; - - if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, SMARTCARD_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - *ptmpdata = (uint8_t)(hsmartcard->Instance->RDR & (uint8_t)0x00FF); - ptmpdata++; - } - - /* At end of Rx process, restore hsmartcard->RxState to Ready */ - hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hsmartcard); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Send an amount of data in interrupt mode. - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @param pData pointer to data buffer. - * @param Size amount of data to be sent. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size) -{ - /* Check that a Tx process is not already ongoing */ - if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hsmartcard); - - hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; - hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY_TX; - - hsmartcard->pTxBuffPtr = pData; - hsmartcard->TxXferSize = Size; - hsmartcard->TxXferCount = Size; - hsmartcard->TxISR = NULL; - - /* Disable the Peripheral first to update mode for TX master */ - CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); - - /* Disable Rx, enable Tx */ - CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RE); - SET_BIT(hsmartcard->Instance->RQR, (uint16_t)SMARTCARD_RXDATA_FLUSH_REQUEST); - SET_BIT(hsmartcard->Instance->CR1, USART_CR1_TE); - - /* Enable the Peripheral */ - SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); - - /* Configure Tx interrupt processing */ - /* Set the Tx ISR function pointer */ - hsmartcard->TxISR = SMARTCARD_TxISR; - - /* Process Unlocked */ - __HAL_UNLOCK(hsmartcard); - - /* Enable the SMARTCARD Error Interrupt: (Frame error) */ - SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); - - /* Enable the SMARTCARD Transmit Data Register Empty Interrupt */ - SET_BIT(hsmartcard->Instance->CR1, USART_CR1_TXEIE); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive an amount of data in interrupt mode. - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @param pData pointer to data buffer. - * @param Size amount of data to be received. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size) -{ - /* Check that a Rx process is not already ongoing */ - if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hsmartcard); - - hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; - hsmartcard->RxState = HAL_SMARTCARD_STATE_BUSY_RX; - - hsmartcard->pRxBuffPtr = pData; - hsmartcard->RxXferSize = Size; - hsmartcard->RxXferCount = Size; - - /* Configure Rx interrupt processing */ - /* Set the Rx ISR function pointer */ - hsmartcard->RxISR = SMARTCARD_RxISR; - - /* Process Unlocked */ - __HAL_UNLOCK(hsmartcard); - - /* Enable the SMARTCARD Parity Error and Data Register not empty Interrupts */ - SET_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE); - - /* Enable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */ - SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Send an amount of data in DMA mode. - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @param pData pointer to data buffer. - * @param Size amount of data to be sent. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size) -{ - /* Check that a Tx process is not already ongoing */ - if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hsmartcard); - - hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY_TX; - - hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; - hsmartcard->pTxBuffPtr = pData; - hsmartcard->TxXferSize = Size; - hsmartcard->TxXferCount = Size; - - /* Disable the Peripheral first to update mode for TX master */ - CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); - - /* Disable Rx, enable Tx */ - CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RE); - SET_BIT(hsmartcard->Instance->RQR, (uint16_t)SMARTCARD_RXDATA_FLUSH_REQUEST); - SET_BIT(hsmartcard->Instance->CR1, USART_CR1_TE); - - /* Enable the Peripheral */ - SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); - - /* Set the SMARTCARD DMA transfer complete callback */ - hsmartcard->hdmatx->XferCpltCallback = SMARTCARD_DMATransmitCplt; - - /* Set the SMARTCARD error callback */ - hsmartcard->hdmatx->XferErrorCallback = SMARTCARD_DMAError; - - /* Set the DMA abort callback */ - hsmartcard->hdmatx->XferAbortCallback = NULL; - - /* Enable the SMARTCARD transmit DMA channel */ - if (HAL_DMA_Start_IT(hsmartcard->hdmatx, (uint32_t)hsmartcard->pTxBuffPtr, (uint32_t)&hsmartcard->Instance->TDR, - Size) == HAL_OK) - { - /* Clear the TC flag in the ICR register */ - CLEAR_BIT(hsmartcard->Instance->ICR, USART_ICR_TCCF); - - /* Process Unlocked */ - __HAL_UNLOCK(hsmartcard); - - /* Enable the UART Error Interrupt: (Frame error) */ - SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); - - /* Enable the DMA transfer for transmit request by setting the DMAT bit - in the SMARTCARD associated USART CR3 register */ - SET_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); - - return HAL_OK; - } - else - { - /* Set error code to DMA */ - hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hsmartcard); - - /* Restore hsmartcard->State to ready */ - hsmartcard->gState = HAL_SMARTCARD_STATE_READY; - - return HAL_ERROR; - } - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive an amount of data in DMA mode. - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @param pData pointer to data buffer. - * @param Size amount of data to be received. - * @note The SMARTCARD-associated USART parity is enabled (PCE = 1), - * the received data contain the parity bit (MSB position). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size) -{ - /* Check that a Rx process is not already ongoing */ - if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hsmartcard); - - hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; - hsmartcard->RxState = HAL_SMARTCARD_STATE_BUSY_RX; - - hsmartcard->pRxBuffPtr = pData; - hsmartcard->RxXferSize = Size; - - /* Set the SMARTCARD DMA transfer complete callback */ - hsmartcard->hdmarx->XferCpltCallback = SMARTCARD_DMAReceiveCplt; - - /* Set the SMARTCARD DMA error callback */ - hsmartcard->hdmarx->XferErrorCallback = SMARTCARD_DMAError; - - /* Set the DMA abort callback */ - hsmartcard->hdmarx->XferAbortCallback = NULL; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(hsmartcard->hdmarx, (uint32_t)&hsmartcard->Instance->RDR, (uint32_t)hsmartcard->pRxBuffPtr, - Size) == HAL_OK) - { - /* Process Unlocked */ - __HAL_UNLOCK(hsmartcard); - - /* Enable the SMARTCARD Parity Error Interrupt */ - SET_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE); - - /* Enable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */ - SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); - - /* Enable the DMA transfer for the receiver request by setting the DMAR bit - in the SMARTCARD associated USART CR3 register */ - SET_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); - - return HAL_OK; - } - else - { - /* Set error code to DMA */ - hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hsmartcard); - - /* Restore hsmartcard->State to ready */ - hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; - - return HAL_ERROR; - } - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Abort ongoing transfers (blocking mode). - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. - * This procedure performs following operations : - * - Disable SMARTCARD Interrupts (Tx and Rx) - * - Disable the DMA transfer in the peripheral register (if enabled) - * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) - * - Set handle State to READY - * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SMARTCARD_Abort(SMARTCARD_HandleTypeDef *hsmartcard) -{ - /* Disable RTOIE, EOBIE, TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ - CLEAR_BIT(hsmartcard->Instance->CR1, - (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RTOIE | USART_CR1_EOBIE)); - CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); - - /* Disable the SMARTCARD DMA Tx request if enabled */ - if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) - { - CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); - - /* Abort the SMARTCARD DMA Tx channel : use blocking DMA Abort API (no callback) */ - if (hsmartcard->hdmatx != NULL) - { - /* Set the SMARTCARD DMA Abort callback to Null. - No call back execution at end of DMA abort procedure */ - hsmartcard->hdmatx->XferAbortCallback = NULL; - - if (HAL_DMA_Abort(hsmartcard->hdmatx) != HAL_OK) - { - if (HAL_DMA_GetError(hsmartcard->hdmatx) == HAL_DMA_ERROR_TIMEOUT) - { - /* Set error code to DMA */ - hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA; - - return HAL_TIMEOUT; - } - } - } - } - - /* Disable the SMARTCARD DMA Rx request if enabled */ - if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) - { - CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); - - /* Abort the SMARTCARD DMA Rx channel : use blocking DMA Abort API (no callback) */ - if (hsmartcard->hdmarx != NULL) - { - /* Set the SMARTCARD DMA Abort callback to Null. - No call back execution at end of DMA abort procedure */ - hsmartcard->hdmarx->XferAbortCallback = NULL; - - if (HAL_DMA_Abort(hsmartcard->hdmarx) != HAL_OK) - { - if (HAL_DMA_GetError(hsmartcard->hdmarx) == HAL_DMA_ERROR_TIMEOUT) - { - /* Set error code to DMA */ - hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA; - - return HAL_TIMEOUT; - } - } - } - } - - /* Reset Tx and Rx transfer counters */ - hsmartcard->TxXferCount = 0U; - hsmartcard->RxXferCount = 0U; - - /* Clear the Error flags in the ICR register */ - __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, - SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | - SMARTCARD_CLEAR_EOBF); - - /* Restore hsmartcard->gState and hsmartcard->RxState to Ready */ - hsmartcard->gState = HAL_SMARTCARD_STATE_READY; - hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; - - /* Reset Handle ErrorCode to No Error */ - hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; - - return HAL_OK; -} - -/** - * @brief Abort ongoing Transmit transfer (blocking mode). - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. - * This procedure performs following operations : - * - Disable SMARTCARD Interrupts (Tx) - * - Disable the DMA transfer in the peripheral register (if enabled) - * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) - * - Set handle State to READY - * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit(SMARTCARD_HandleTypeDef *hsmartcard) -{ - /* Disable TXEIE and TCIE interrupts */ - CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); - - /* Check if a receive process is ongoing or not. If not disable ERR IT */ - if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY) - { - /* Disable the SMARTCARD Error Interrupt: (Frame error) */ - CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); - } - - /* Disable the SMARTCARD DMA Tx request if enabled */ - if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) - { - CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); - - /* Abort the SMARTCARD DMA Tx channel : use blocking DMA Abort API (no callback) */ - if (hsmartcard->hdmatx != NULL) - { - /* Set the SMARTCARD DMA Abort callback to Null. - No call back execution at end of DMA abort procedure */ - hsmartcard->hdmatx->XferAbortCallback = NULL; - - if (HAL_DMA_Abort(hsmartcard->hdmatx) != HAL_OK) - { - if (HAL_DMA_GetError(hsmartcard->hdmatx) == HAL_DMA_ERROR_TIMEOUT) - { - /* Set error code to DMA */ - hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA; - - return HAL_TIMEOUT; - } - } - } - } - - /* Reset Tx transfer counter */ - hsmartcard->TxXferCount = 0U; - - /* Clear the Error flags in the ICR register */ - __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, SMARTCARD_CLEAR_FEF); - - /* Restore hsmartcard->gState to Ready */ - hsmartcard->gState = HAL_SMARTCARD_STATE_READY; - - return HAL_OK; -} - -/** - * @brief Abort ongoing Receive transfer (blocking mode). - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. - * This procedure performs following operations : - * - Disable SMARTCARD Interrupts (Rx) - * - Disable the DMA transfer in the peripheral register (if enabled) - * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) - * - Set handle State to READY - * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive(SMARTCARD_HandleTypeDef *hsmartcard) -{ - /* Disable RTOIE, EOBIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ - CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_RTOIE | USART_CR1_EOBIE)); - CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); - - /* Check if a Transmit process is ongoing or not. If not disable ERR IT */ - if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) - { - /* Disable the SMARTCARD Error Interrupt: (Frame error) */ - CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); - } - - /* Disable the SMARTCARD DMA Rx request if enabled */ - if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) - { - CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); - - /* Abort the SMARTCARD DMA Rx channel : use blocking DMA Abort API (no callback) */ - if (hsmartcard->hdmarx != NULL) - { - /* Set the SMARTCARD DMA Abort callback to Null. - No call back execution at end of DMA abort procedure */ - hsmartcard->hdmarx->XferAbortCallback = NULL; - - if (HAL_DMA_Abort(hsmartcard->hdmarx) != HAL_OK) - { - if (HAL_DMA_GetError(hsmartcard->hdmarx) == HAL_DMA_ERROR_TIMEOUT) - { - /* Set error code to DMA */ - hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA; - - return HAL_TIMEOUT; - } - } - } - } - - /* Reset Rx transfer counter */ - hsmartcard->RxXferCount = 0U; - - /* Clear the Error flags in the ICR register */ - __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, - SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | - SMARTCARD_CLEAR_EOBF); - - /* Restore hsmartcard->RxState to Ready */ - hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; - - return HAL_OK; -} - -/** - * @brief Abort ongoing transfers (Interrupt mode). - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. - * This procedure performs following operations : - * - Disable SMARTCARD Interrupts (Tx and Rx) - * - Disable the DMA transfer in the peripheral register (if enabled) - * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) - * - Set handle State to READY - * - At abort completion, call user abort complete callback - * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be - * considered as completed only when user abort complete callback is executed (not when exiting function). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SMARTCARD_Abort_IT(SMARTCARD_HandleTypeDef *hsmartcard) -{ - uint32_t abortcplt = 1U; - - /* Disable RTOIE, EOBIE, TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ - CLEAR_BIT(hsmartcard->Instance->CR1, - (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RTOIE | USART_CR1_EOBIE)); - CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); - - /* If DMA Tx and/or DMA Rx Handles are associated to SMARTCARD Handle, DMA Abort complete callbacks should be initialised - before any call to DMA Abort functions */ - /* DMA Tx Handle is valid */ - if (hsmartcard->hdmatx != NULL) - { - /* Set DMA Abort Complete callback if SMARTCARD DMA Tx request if enabled. - Otherwise, set it to NULL */ - if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) - { - hsmartcard->hdmatx->XferAbortCallback = SMARTCARD_DMATxAbortCallback; - } - else - { - hsmartcard->hdmatx->XferAbortCallback = NULL; - } - } - /* DMA Rx Handle is valid */ - if (hsmartcard->hdmarx != NULL) - { - /* Set DMA Abort Complete callback if SMARTCARD DMA Rx request if enabled. - Otherwise, set it to NULL */ - if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) - { - hsmartcard->hdmarx->XferAbortCallback = SMARTCARD_DMARxAbortCallback; - } - else - { - hsmartcard->hdmarx->XferAbortCallback = NULL; - } - } - - /* Disable the SMARTCARD DMA Tx request if enabled */ - if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) - { - /* Disable DMA Tx at UART level */ - CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); - - /* Abort the SMARTCARD DMA Tx channel : use non blocking DMA Abort API (callback) */ - if (hsmartcard->hdmatx != NULL) - { - /* SMARTCARD Tx DMA Abort callback has already been initialised : - will lead to call HAL_SMARTCARD_AbortCpltCallback() at end of DMA abort procedure */ - - /* Abort DMA TX */ - if (HAL_DMA_Abort_IT(hsmartcard->hdmatx) != HAL_OK) - { - hsmartcard->hdmatx->XferAbortCallback = NULL; - } - else - { - abortcplt = 0U; - } - } - } - - /* Disable the SMARTCARD DMA Rx request if enabled */ - if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) - { - CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); - - /* Abort the SMARTCARD DMA Rx channel : use non blocking DMA Abort API (callback) */ - if (hsmartcard->hdmarx != NULL) - { - /* SMARTCARD Rx DMA Abort callback has already been initialised : - will lead to call HAL_SMARTCARD_AbortCpltCallback() at end of DMA abort procedure */ - - /* Abort DMA RX */ - if (HAL_DMA_Abort_IT(hsmartcard->hdmarx) != HAL_OK) - { - hsmartcard->hdmarx->XferAbortCallback = NULL; - abortcplt = 1U; - } - else - { - abortcplt = 0U; - } - } - } - - /* if no DMA abort complete callback execution is required => call user Abort Complete callback */ - if (abortcplt == 1U) - { - /* Reset Tx and Rx transfer counters */ - hsmartcard->TxXferCount = 0U; - hsmartcard->RxXferCount = 0U; - - /* Clear ISR function pointers */ - hsmartcard->RxISR = NULL; - hsmartcard->TxISR = NULL; - - /* Reset errorCode */ - hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; - - /* Clear the Error flags in the ICR register */ - __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, - SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | - SMARTCARD_CLEAR_EOBF); - - /* Restore hsmartcard->gState and hsmartcard->RxState to Ready */ - hsmartcard->gState = HAL_SMARTCARD_STATE_READY; - hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; - - /* As no DMA to be aborted, call directly user Abort complete callback */ -#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) - /* Call registered Abort complete callback */ - hsmartcard->AbortCpltCallback(hsmartcard); -#else - /* Call legacy weak Abort complete callback */ - HAL_SMARTCARD_AbortCpltCallback(hsmartcard); -#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ - } - - return HAL_OK; -} - -/** - * @brief Abort ongoing Transmit transfer (Interrupt mode). - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. - * This procedure performs following operations : - * - Disable SMARTCARD Interrupts (Tx) - * - Disable the DMA transfer in the peripheral register (if enabled) - * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) - * - Set handle State to READY - * - At abort completion, call user abort complete callback - * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be - * considered as completed only when user abort complete callback is executed (not when exiting function). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard) -{ - /* Disable TXEIE and TCIE interrupts */ - CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); - - /* Check if a receive process is ongoing or not. If not disable ERR IT */ - if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY) - { - /* Disable the SMARTCARD Error Interrupt: (Frame error) */ - CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); - } - - /* Disable the SMARTCARD DMA Tx request if enabled */ - if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) - { - CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); - - /* Abort the SMARTCARD DMA Tx channel : use non blocking DMA Abort API (callback) */ - if (hsmartcard->hdmatx != NULL) - { - /* Set the SMARTCARD DMA Abort callback : - will lead to call HAL_SMARTCARD_AbortCpltCallback() at end of DMA abort procedure */ - hsmartcard->hdmatx->XferAbortCallback = SMARTCARD_DMATxOnlyAbortCallback; - - /* Abort DMA TX */ - if (HAL_DMA_Abort_IT(hsmartcard->hdmatx) != HAL_OK) - { - /* Call Directly hsmartcard->hdmatx->XferAbortCallback function in case of error */ - hsmartcard->hdmatx->XferAbortCallback(hsmartcard->hdmatx); - } - } - else - { - /* Reset Tx transfer counter */ - hsmartcard->TxXferCount = 0U; - - /* Clear TxISR function pointers */ - hsmartcard->TxISR = NULL; - - /* Restore hsmartcard->gState to Ready */ - hsmartcard->gState = HAL_SMARTCARD_STATE_READY; - - /* As no DMA to be aborted, call directly user Abort complete callback */ -#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) - /* Call registered Abort Transmit Complete Callback */ - hsmartcard->AbortTransmitCpltCallback(hsmartcard); -#else - /* Call legacy weak Abort Transmit Complete Callback */ - HAL_SMARTCARD_AbortTransmitCpltCallback(hsmartcard); -#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ - } - } - else - { - /* Reset Tx transfer counter */ - hsmartcard->TxXferCount = 0U; - - /* Clear TxISR function pointers */ - hsmartcard->TxISR = NULL; - - /* Clear the Error flags in the ICR register */ - __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, SMARTCARD_CLEAR_FEF); - - /* Restore hsmartcard->gState to Ready */ - hsmartcard->gState = HAL_SMARTCARD_STATE_READY; - - /* As no DMA to be aborted, call directly user Abort complete callback */ -#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) - /* Call registered Abort Transmit Complete Callback */ - hsmartcard->AbortTransmitCpltCallback(hsmartcard); -#else - /* Call legacy weak Abort Transmit Complete Callback */ - HAL_SMARTCARD_AbortTransmitCpltCallback(hsmartcard); -#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ - } - - return HAL_OK; -} - -/** - * @brief Abort ongoing Receive transfer (Interrupt mode). - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. - * This procedure performs following operations : - * - Disable SMARTCARD Interrupts (Rx) - * - Disable the DMA transfer in the peripheral register (if enabled) - * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) - * - Set handle State to READY - * - At abort completion, call user abort complete callback - * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be - * considered as completed only when user abort complete callback is executed (not when exiting function). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive_IT(SMARTCARD_HandleTypeDef *hsmartcard) -{ - /* Disable RTOIE, EOBIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ - CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_RTOIE | USART_CR1_EOBIE)); - CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); - - /* Check if a Transmit process is ongoing or not. If not disable ERR IT */ - if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) - { - /* Disable the SMARTCARD Error Interrupt: (Frame error) */ - CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); - } - - /* Disable the SMARTCARD DMA Rx request if enabled */ - if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) - { - CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); - - /* Abort the SMARTCARD DMA Rx channel : use non blocking DMA Abort API (callback) */ - if (hsmartcard->hdmarx != NULL) - { - /* Set the SMARTCARD DMA Abort callback : - will lead to call HAL_SMARTCARD_AbortCpltCallback() at end of DMA abort procedure */ - hsmartcard->hdmarx->XferAbortCallback = SMARTCARD_DMARxOnlyAbortCallback; - - /* Abort DMA RX */ - if (HAL_DMA_Abort_IT(hsmartcard->hdmarx) != HAL_OK) - { - /* Call Directly hsmartcard->hdmarx->XferAbortCallback function in case of error */ - hsmartcard->hdmarx->XferAbortCallback(hsmartcard->hdmarx); - } - } - else - { - /* Reset Rx transfer counter */ - hsmartcard->RxXferCount = 0U; - - /* Clear RxISR function pointer */ - hsmartcard->RxISR = NULL; - - /* Clear the Error flags in the ICR register */ - __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, - SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | - SMARTCARD_CLEAR_EOBF); - - /* Restore hsmartcard->RxState to Ready */ - hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; - - /* As no DMA to be aborted, call directly user Abort complete callback */ -#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) - /* Call registered Abort Receive Complete Callback */ - hsmartcard->AbortReceiveCpltCallback(hsmartcard); -#else - /* Call legacy weak Abort Receive Complete Callback */ - HAL_SMARTCARD_AbortReceiveCpltCallback(hsmartcard); -#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ - } - } - else - { - /* Reset Rx transfer counter */ - hsmartcard->RxXferCount = 0U; - - /* Clear RxISR function pointer */ - hsmartcard->RxISR = NULL; - - /* Clear the Error flags in the ICR register */ - __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, - SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | - SMARTCARD_CLEAR_EOBF); - - /* Restore hsmartcard->RxState to Ready */ - hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; - - /* As no DMA to be aborted, call directly user Abort complete callback */ -#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) - /* Call registered Abort Receive Complete Callback */ - hsmartcard->AbortReceiveCpltCallback(hsmartcard); -#else - /* Call legacy weak Abort Receive Complete Callback */ - HAL_SMARTCARD_AbortReceiveCpltCallback(hsmartcard); -#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ - } - - return HAL_OK; -} - -/** - * @brief Handle SMARTCARD interrupt requests. - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @retval None - */ -void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsmartcard) -{ - uint32_t isrflags = READ_REG(hsmartcard->Instance->ISR); - uint32_t cr1its = READ_REG(hsmartcard->Instance->CR1); - uint32_t cr3its = READ_REG(hsmartcard->Instance->CR3); - uint32_t errorflags; - uint32_t errorcode; - - /* If no error occurs */ - errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE | USART_ISR_RTOF)); - if (errorflags == 0U) - { - /* SMARTCARD in mode Receiver ---------------------------------------------------*/ - if (((isrflags & USART_ISR_RXNE) != 0U) - && ((cr1its & USART_CR1_RXNEIE) != 0U)) - { - if (hsmartcard->RxISR != NULL) - { - hsmartcard->RxISR(hsmartcard); - } - return; - } - } - - /* If some errors occur */ - if ((errorflags != 0U) - && (((cr3its & USART_CR3_EIE) != 0U) - || ((cr1its & (USART_CR1_RXNEIE | USART_CR1_PEIE)) != 0U))) - { - /* SMARTCARD parity error interrupt occurred -------------------------------------*/ - if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) - { - __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_PEF); - - hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_PE; - } - - /* SMARTCARD frame error interrupt occurred --------------------------------------*/ - if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) - { - __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_FEF); - - hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_FE; - } - - /* SMARTCARD noise error interrupt occurred --------------------------------------*/ - if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) - { - __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_NEF); - - hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_NE; - } - - /* SMARTCARD Over-Run interrupt occurred -----------------------------------------*/ - if (((isrflags & USART_ISR_ORE) != 0U) - && (((cr1its & USART_CR1_RXNEIE) != 0U) - || ((cr3its & USART_CR3_EIE) != 0U))) - { - __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_OREF); - - hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_ORE; - } - - /* SMARTCARD receiver timeout interrupt occurred -----------------------------------------*/ - if (((isrflags & USART_ISR_RTOF) != 0U) && ((cr1its & USART_CR1_RTOIE) != 0U)) - { - __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_RTOF); - - hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_RTO; - } - - /* Call SMARTCARD Error Call back function if need be --------------------------*/ - if (hsmartcard->ErrorCode != HAL_SMARTCARD_ERROR_NONE) - { - /* SMARTCARD in mode Receiver ---------------------------------------------------*/ - if (((isrflags & USART_ISR_RXNE) != 0U) - && ((cr1its & USART_CR1_RXNEIE) != 0U)) - { - if (hsmartcard->RxISR != NULL) - { - hsmartcard->RxISR(hsmartcard); - } - } - - /* If Error is to be considered as blocking : - - Receiver Timeout error in Reception - - Overrun error in Reception - - any error occurs in DMA mode reception - */ - errorcode = hsmartcard->ErrorCode; - if ((HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) - || ((errorcode & (HAL_SMARTCARD_ERROR_RTO | HAL_SMARTCARD_ERROR_ORE)) != 0U)) - { - /* Blocking error : transfer is aborted - Set the SMARTCARD state ready to be able to start again the process, - Disable Rx Interrupts, and disable Rx DMA request, if ongoing */ - SMARTCARD_EndRxTransfer(hsmartcard); - - /* Disable the SMARTCARD DMA Rx request if enabled */ - if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) - { - CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); - - /* Abort the SMARTCARD DMA Rx channel */ - if (hsmartcard->hdmarx != NULL) - { - /* Set the SMARTCARD DMA Abort callback : - will lead to call HAL_SMARTCARD_ErrorCallback() at end of DMA abort procedure */ - hsmartcard->hdmarx->XferAbortCallback = SMARTCARD_DMAAbortOnError; - - /* Abort DMA RX */ - if (HAL_DMA_Abort_IT(hsmartcard->hdmarx) != HAL_OK) - { - /* Call Directly hsmartcard->hdmarx->XferAbortCallback function in case of error */ - hsmartcard->hdmarx->XferAbortCallback(hsmartcard->hdmarx); - } - } - else - { -#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) - /* Call registered user error callback */ - hsmartcard->ErrorCallback(hsmartcard); -#else - /* Call legacy weak user error callback */ - HAL_SMARTCARD_ErrorCallback(hsmartcard); -#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ - } - } - else - { -#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) - /* Call registered user error callback */ - hsmartcard->ErrorCallback(hsmartcard); -#else - /* Call legacy weak user error callback */ - HAL_SMARTCARD_ErrorCallback(hsmartcard); -#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ - } - } - /* other error type to be considered as blocking : - - Frame error in Transmission - */ - else if ((hsmartcard->gState == HAL_SMARTCARD_STATE_BUSY_TX) - && ((errorcode & HAL_SMARTCARD_ERROR_FE) != 0U)) - { - /* Blocking error : transfer is aborted - Set the SMARTCARD state ready to be able to start again the process, - Disable Tx Interrupts, and disable Tx DMA request, if ongoing */ - SMARTCARD_EndTxTransfer(hsmartcard); - - /* Disable the SMARTCARD DMA Tx request if enabled */ - if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) - { - CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); - - /* Abort the SMARTCARD DMA Tx channel */ - if (hsmartcard->hdmatx != NULL) - { - /* Set the SMARTCARD DMA Abort callback : - will lead to call HAL_SMARTCARD_ErrorCallback() at end of DMA abort procedure */ - hsmartcard->hdmatx->XferAbortCallback = SMARTCARD_DMAAbortOnError; - - /* Abort DMA TX */ - if (HAL_DMA_Abort_IT(hsmartcard->hdmatx) != HAL_OK) - { - /* Call Directly hsmartcard->hdmatx->XferAbortCallback function in case of error */ - hsmartcard->hdmatx->XferAbortCallback(hsmartcard->hdmatx); - } - } - else - { -#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) - /* Call registered user error callback */ - hsmartcard->ErrorCallback(hsmartcard); -#else - /* Call legacy weak user error callback */ - HAL_SMARTCARD_ErrorCallback(hsmartcard); -#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ - } - } - else - { -#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) - /* Call registered user error callback */ - hsmartcard->ErrorCallback(hsmartcard); -#else - /* Call legacy weak user error callback */ - HAL_SMARTCARD_ErrorCallback(hsmartcard); -#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ - } - } - else - { - /* Non Blocking error : transfer could go on. - Error is notified to user through user error callback */ -#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) - /* Call registered user error callback */ - hsmartcard->ErrorCallback(hsmartcard); -#else - /* Call legacy weak user error callback */ - HAL_SMARTCARD_ErrorCallback(hsmartcard); -#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ - hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; - } - } - return; - - } /* End if some error occurs */ - - /* SMARTCARD in mode Receiver, end of block interruption ------------------------*/ - if (((isrflags & USART_ISR_EOBF) != 0U) && ((cr1its & USART_CR1_EOBIE) != 0U)) - { - hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; - __HAL_UNLOCK(hsmartcard); -#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) - /* Call registered Rx complete callback */ - hsmartcard->RxCpltCallback(hsmartcard); -#else - /* Call legacy weak Rx complete callback */ - HAL_SMARTCARD_RxCpltCallback(hsmartcard); -#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ - /* Clear EOBF interrupt after HAL_SMARTCARD_RxCpltCallback() call for the End of Block information - to be available during HAL_SMARTCARD_RxCpltCallback() processing */ - __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_EOBF); - return; - } - - /* SMARTCARD in mode Transmitter ------------------------------------------------*/ - if (((isrflags & USART_ISR_TXE) != 0U) - && ((cr1its & USART_CR1_TXEIE) != 0U)) - { - if (hsmartcard->TxISR != NULL) - { - hsmartcard->TxISR(hsmartcard); - } - return; - } - - /* SMARTCARD in mode Transmitter (transmission end) ------------------------*/ - if (__HAL_SMARTCARD_GET_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication) != RESET) - { - if (__HAL_SMARTCARD_GET_IT_SOURCE(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication) != RESET) - { - SMARTCARD_EndTransmit_IT(hsmartcard); - return; - } - } - -} - -/** - * @brief Tx Transfer completed callback. - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @retval None - */ -__weak void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hsmartcard); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SMARTCARD_TxCpltCallback can be implemented in the user file. - */ -} - -/** - * @brief Rx Transfer completed callback. - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @retval None - */ -__weak void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hsmartcard); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SMARTCARD_RxCpltCallback can be implemented in the user file. - */ -} - -/** - * @brief SMARTCARD error callback. - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @retval None - */ -__weak void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsmartcard) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hsmartcard); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SMARTCARD_ErrorCallback can be implemented in the user file. - */ -} - -/** - * @brief SMARTCARD Abort Complete callback. - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @retval None - */ -__weak void HAL_SMARTCARD_AbortCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hsmartcard); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SMARTCARD_AbortCpltCallback can be implemented in the user file. - */ -} - -/** - * @brief SMARTCARD Abort Complete callback. - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @retval None - */ -__weak void HAL_SMARTCARD_AbortTransmitCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hsmartcard); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SMARTCARD_AbortTransmitCpltCallback can be implemented in the user file. - */ -} - -/** - * @brief SMARTCARD Abort Receive Complete callback. - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @retval None - */ -__weak void HAL_SMARTCARD_AbortReceiveCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hsmartcard); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SMARTCARD_AbortReceiveCpltCallback can be implemented in the user file. - */ -} - -/** - * @} - */ - -/** @defgroup SMARTCARD_Exported_Functions_Group4 Peripheral State and Errors functions - * @brief SMARTCARD State and Errors functions - * -@verbatim - ============================================================================== - ##### Peripheral State and Errors functions ##### - ============================================================================== - [..] - This subsection provides a set of functions allowing to return the State of SmartCard - handle and also return Peripheral Errors occurred during communication process - (+) HAL_SMARTCARD_GetState() API can be helpful to check in run-time the state - of the SMARTCARD peripheral. - (+) HAL_SMARTCARD_GetError() checks in run-time errors that could occur during - communication. - -@endverbatim - * @{ - */ - -/** - * @brief Return the SMARTCARD handle state. - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @retval SMARTCARD handle state - */ -HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsmartcard) -{ - /* Return SMARTCARD handle state */ - uint32_t temp1; - uint32_t temp2; - temp1 = (uint32_t)hsmartcard->gState; - temp2 = (uint32_t)hsmartcard->RxState; - - return (HAL_SMARTCARD_StateTypeDef)(temp1 | temp2); -} - -/** - * @brief Return the SMARTCARD handle error code. - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @retval SMARTCARD handle Error Code - */ -uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsmartcard) -{ - return hsmartcard->ErrorCode; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup SMARTCARD_Private_Functions SMARTCARD Private Functions - * @{ - */ - -#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) -/** - * @brief Initialize the callbacks to their default values. - * @param hsmartcard SMARTCARD handle. - * @retval none - */ -void SMARTCARD_InitCallbacksToDefault(SMARTCARD_HandleTypeDef *hsmartcard) -{ - /* Init the SMARTCARD Callback settings */ - hsmartcard->TxCpltCallback = HAL_SMARTCARD_TxCpltCallback; /* Legacy weak TxCpltCallback */ - hsmartcard->RxCpltCallback = HAL_SMARTCARD_RxCpltCallback; /* Legacy weak RxCpltCallback */ - hsmartcard->ErrorCallback = HAL_SMARTCARD_ErrorCallback; /* Legacy weak ErrorCallback */ - hsmartcard->AbortCpltCallback = HAL_SMARTCARD_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ - hsmartcard->AbortTransmitCpltCallback = HAL_SMARTCARD_AbortTransmitCpltCallback; /* Legacy weak AbortTransmitCpltCallback */ - hsmartcard->AbortReceiveCpltCallback = HAL_SMARTCARD_AbortReceiveCpltCallback; /* Legacy weak AbortReceiveCpltCallback */ - -} -#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ - -/** - * @brief Configure the SMARTCARD associated USART peripheral. - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @retval HAL status - */ -static HAL_StatusTypeDef SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsmartcard) -{ - uint32_t tmpreg; - SMARTCARD_ClockSourceTypeDef clocksource; - HAL_StatusTypeDef ret = HAL_OK; - uint32_t pclk; - - /* Check the parameters */ - assert_param(IS_SMARTCARD_INSTANCE(hsmartcard->Instance)); - assert_param(IS_SMARTCARD_BAUDRATE(hsmartcard->Init.BaudRate)); - assert_param(IS_SMARTCARD_WORD_LENGTH(hsmartcard->Init.WordLength)); - assert_param(IS_SMARTCARD_STOPBITS(hsmartcard->Init.StopBits)); - assert_param(IS_SMARTCARD_PARITY(hsmartcard->Init.Parity)); - assert_param(IS_SMARTCARD_MODE(hsmartcard->Init.Mode)); - assert_param(IS_SMARTCARD_POLARITY(hsmartcard->Init.CLKPolarity)); - assert_param(IS_SMARTCARD_PHASE(hsmartcard->Init.CLKPhase)); - assert_param(IS_SMARTCARD_LASTBIT(hsmartcard->Init.CLKLastBit)); - assert_param(IS_SMARTCARD_ONE_BIT_SAMPLE(hsmartcard->Init.OneBitSampling)); - assert_param(IS_SMARTCARD_NACK(hsmartcard->Init.NACKEnable)); - assert_param(IS_SMARTCARD_TIMEOUT(hsmartcard->Init.TimeOutEnable)); - assert_param(IS_SMARTCARD_AUTORETRY_COUNT(hsmartcard->Init.AutoRetryCount)); - - /*-------------------------- USART CR1 Configuration -----------------------*/ - /* In SmartCard mode, M and PCE are forced to 1 (8 bits + parity). - * Oversampling is forced to 16 (OVER8 = 0). - * Configure the Parity and Mode: - * set PS bit according to hsmartcard->Init.Parity value - * set TE and RE bits according to hsmartcard->Init.Mode value */ - tmpreg = (uint32_t)(hsmartcard->Init.Parity | hsmartcard->Init.Mode | hsmartcard->Init.WordLength); - MODIFY_REG(hsmartcard->Instance->CR1, USART_CR1_FIELDS, tmpreg); - - /*-------------------------- USART CR2 Configuration -----------------------*/ - tmpreg = hsmartcard->Init.StopBits; - /* Synchronous mode is activated by default */ - tmpreg |= (uint32_t) USART_CR2_CLKEN | hsmartcard->Init.CLKPolarity; - tmpreg |= (uint32_t) hsmartcard->Init.CLKPhase | hsmartcard->Init.CLKLastBit; - tmpreg |= (uint32_t) hsmartcard->Init.TimeOutEnable; - MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_FIELDS, tmpreg); - - /*-------------------------- USART CR3 Configuration -----------------------*/ - /* Configure - * - one-bit sampling method versus three samples' majority rule - * according to hsmartcard->Init.OneBitSampling - * - NACK transmission in case of parity error according - * to hsmartcard->Init.NACKEnable - * - autoretry counter according to hsmartcard->Init.AutoRetryCount */ - - tmpreg = (uint32_t) hsmartcard->Init.OneBitSampling | hsmartcard->Init.NACKEnable; - tmpreg |= ((uint32_t)hsmartcard->Init.AutoRetryCount << USART_CR3_SCARCNT_Pos); - MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_FIELDS, tmpreg); - - - /*-------------------------- USART GTPR Configuration ----------------------*/ - tmpreg = (hsmartcard->Init.Prescaler | ((uint32_t)hsmartcard->Init.GuardTime << USART_GTPR_GT_Pos)); - MODIFY_REG(hsmartcard->Instance->GTPR, (uint16_t)(USART_GTPR_GT | USART_GTPR_PSC), (uint16_t)tmpreg); - - /*-------------------------- USART RTOR Configuration ----------------------*/ - tmpreg = ((uint32_t)hsmartcard->Init.BlockLength << USART_RTOR_BLEN_Pos); - if (hsmartcard->Init.TimeOutEnable == SMARTCARD_TIMEOUT_ENABLE) - { - assert_param(IS_SMARTCARD_TIMEOUT_VALUE(hsmartcard->Init.TimeOutValue)); - tmpreg |= (uint32_t) hsmartcard->Init.TimeOutValue; - } - MODIFY_REG(hsmartcard->Instance->RTOR, (USART_RTOR_RTO | USART_RTOR_BLEN), tmpreg); - - /*-------------------------- USART BRR Configuration -----------------------*/ - SMARTCARD_GETCLOCKSOURCE(hsmartcard, clocksource); - tmpreg = 0U; - switch (clocksource) - { - case SMARTCARD_CLOCKSOURCE_PCLK1: - pclk = HAL_RCC_GetPCLK1Freq(); - tmpreg = (uint16_t)((pclk + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate); - break; - case SMARTCARD_CLOCKSOURCE_HSI: - tmpreg = (uint16_t)((HSI_VALUE + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate); - break; - case SMARTCARD_CLOCKSOURCE_SYSCLK: - pclk = HAL_RCC_GetSysClockFreq(); - tmpreg = (uint16_t)((pclk + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate); - break; - case SMARTCARD_CLOCKSOURCE_LSE: - tmpreg = (uint16_t)((LSE_VALUE + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate); - break; - default: - ret = HAL_ERROR; - break; - } - - /* USARTDIV must be greater than or equal to 0d16 */ - if ((tmpreg >= USART_BRR_MIN) && (tmpreg <= USART_BRR_MAX)) - { - hsmartcard->Instance->BRR = tmpreg; - } - else - { - ret = HAL_ERROR; - } - - - /* Clear ISR function pointers */ - hsmartcard->RxISR = NULL; - hsmartcard->TxISR = NULL; - - return ret; -} - - -/** - * @brief Configure the SMARTCARD associated USART peripheral advanced features. - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @retval None - */ -static void SMARTCARD_AdvFeatureConfig(SMARTCARD_HandleTypeDef *hsmartcard) -{ - /* Check whether the set of advanced features to configure is properly set */ - assert_param(IS_SMARTCARD_ADVFEATURE_INIT(hsmartcard->AdvancedInit.AdvFeatureInit)); - - /* if required, configure TX pin active level inversion */ - if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_TXINVERT_INIT)) - { - assert_param(IS_SMARTCARD_ADVFEATURE_TXINV(hsmartcard->AdvancedInit.TxPinLevelInvert)); - MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_TXINV, hsmartcard->AdvancedInit.TxPinLevelInvert); - } - - /* if required, configure RX pin active level inversion */ - if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_RXINVERT_INIT)) - { - assert_param(IS_SMARTCARD_ADVFEATURE_RXINV(hsmartcard->AdvancedInit.RxPinLevelInvert)); - MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_RXINV, hsmartcard->AdvancedInit.RxPinLevelInvert); - } - - /* if required, configure data inversion */ - if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_DATAINVERT_INIT)) - { - assert_param(IS_SMARTCARD_ADVFEATURE_DATAINV(hsmartcard->AdvancedInit.DataInvert)); - MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_DATAINV, hsmartcard->AdvancedInit.DataInvert); - } - - /* if required, configure RX/TX pins swap */ - if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_SWAP_INIT)) - { - assert_param(IS_SMARTCARD_ADVFEATURE_SWAP(hsmartcard->AdvancedInit.Swap)); - MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_SWAP, hsmartcard->AdvancedInit.Swap); - } - - /* if required, configure RX overrun detection disabling */ - if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT)) - { - assert_param(IS_SMARTCARD_OVERRUN(hsmartcard->AdvancedInit.OverrunDisable)); - MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_OVRDIS, hsmartcard->AdvancedInit.OverrunDisable); - } - - /* if required, configure DMA disabling on reception error */ - if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT)) - { - assert_param(IS_SMARTCARD_ADVFEATURE_DMAONRXERROR(hsmartcard->AdvancedInit.DMADisableonRxError)); - MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_DDRE, hsmartcard->AdvancedInit.DMADisableonRxError); - } - - /* if required, configure MSB first on communication line */ - if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_MSBFIRST_INIT)) - { - assert_param(IS_SMARTCARD_ADVFEATURE_MSBFIRST(hsmartcard->AdvancedInit.MSBFirst)); - MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_MSBFIRST, hsmartcard->AdvancedInit.MSBFirst); - } - -} - -/** - * @brief Check the SMARTCARD Idle State. - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @retval HAL status - */ -static HAL_StatusTypeDef SMARTCARD_CheckIdleState(SMARTCARD_HandleTypeDef *hsmartcard) -{ - uint32_t tickstart; - - /* Initialize the SMARTCARD ErrorCode */ - hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; - - /* Init tickstart for timeout management */ - tickstart = HAL_GetTick(); - - /* Check if the Transmitter is enabled */ - if ((hsmartcard->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE) - { - /* Wait until TEACK flag is set */ - if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, USART_ISR_TEACK, RESET, tickstart, - SMARTCARD_TEACK_REACK_TIMEOUT) != HAL_OK) - { - /* Timeout occurred */ - return HAL_TIMEOUT; - } - } - /* Check if the Receiver is enabled */ - if ((hsmartcard->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE) - { - /* Wait until REACK flag is set */ - if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, USART_ISR_REACK, RESET, tickstart, - SMARTCARD_TEACK_REACK_TIMEOUT) != HAL_OK) - { - /* Timeout occurred */ - return HAL_TIMEOUT; - } - } - - /* Initialize the SMARTCARD states */ - hsmartcard->gState = HAL_SMARTCARD_STATE_READY; - hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hsmartcard); - - return HAL_OK; -} - -/** - * @brief Handle SMARTCARD Communication Timeout. - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @param Flag Specifies the SMARTCARD flag to check. - * @param Status The new Flag status (SET or RESET). - * @param Tickstart Tick start value - * @param Timeout Timeout duration. - * @retval HAL status - */ -static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Flag, - FlagStatus Status, uint32_t Tickstart, uint32_t Timeout) -{ - /* Wait until flag is set */ - while ((__HAL_SMARTCARD_GET_FLAG(hsmartcard, Flag) ? SET : RESET) == Status) - { - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) - { - /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ - CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE)); - CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); - - hsmartcard->gState = HAL_SMARTCARD_STATE_READY; - hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hsmartcard); - return HAL_TIMEOUT; - } - } - } - return HAL_OK; -} - - -/** - * @brief End ongoing Tx transfer on SMARTCARD peripheral (following error detection or Transmit completion). - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @retval None - */ -static void SMARTCARD_EndTxTransfer(SMARTCARD_HandleTypeDef *hsmartcard) -{ - /* Disable TXEIE, TCIE and ERR (Frame error, noise error, overrun error) interrupts */ - CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); - CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); - - /* At end of Tx process, restore hsmartcard->gState to Ready */ - hsmartcard->gState = HAL_SMARTCARD_STATE_READY; -} - - -/** - * @brief End ongoing Rx transfer on UART peripheral (following error detection or Reception completion). - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @retval None - */ -static void SMARTCARD_EndRxTransfer(SMARTCARD_HandleTypeDef *hsmartcard) -{ - /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ - CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); - CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); - - /* At end of Rx process, restore hsmartcard->RxState to Ready */ - hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; -} - - -/** - * @brief DMA SMARTCARD transmit process complete callback. - * @param hdma Pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma) -{ - SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); - hsmartcard->TxXferCount = 0U; - - /* Disable the DMA transfer for transmit request by resetting the DMAT bit - in the SMARTCARD associated USART CR3 register */ - CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); - - /* Enable the SMARTCARD Transmit Complete Interrupt */ - __HAL_SMARTCARD_ENABLE_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication); -} - -/** - * @brief DMA SMARTCARD receive process complete callback. - * @param hdma Pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef *hdma) -{ - SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); - hsmartcard->RxXferCount = 0U; - - /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ - CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE); - CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); - - /* Disable the DMA transfer for the receiver request by resetting the DMAR bit - in the SMARTCARD associated USART CR3 register */ - CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); - - /* At end of Rx process, restore hsmartcard->RxState to Ready */ - hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; - -#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) - /* Call registered Rx complete callback */ - hsmartcard->RxCpltCallback(hsmartcard); -#else - /* Call legacy weak Rx complete callback */ - HAL_SMARTCARD_RxCpltCallback(hsmartcard); -#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ -} - -/** - * @brief DMA SMARTCARD communication error callback. - * @param hdma Pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma) -{ - SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); - - /* Stop SMARTCARD DMA Tx request if ongoing */ - if (hsmartcard->gState == HAL_SMARTCARD_STATE_BUSY_TX) - { - if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) - { - hsmartcard->TxXferCount = 0U; - SMARTCARD_EndTxTransfer(hsmartcard); - } - } - - /* Stop SMARTCARD DMA Rx request if ongoing */ - if (hsmartcard->RxState == HAL_SMARTCARD_STATE_BUSY_RX) - { - if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) - { - hsmartcard->RxXferCount = 0U; - SMARTCARD_EndRxTransfer(hsmartcard); - } - } - - hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_DMA; -#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) - /* Call registered user error callback */ - hsmartcard->ErrorCallback(hsmartcard); -#else - /* Call legacy weak user error callback */ - HAL_SMARTCARD_ErrorCallback(hsmartcard); -#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ -} - -/** - * @brief DMA SMARTCARD communication abort callback, when initiated by HAL services on Error - * (To be called at end of DMA Abort procedure following error occurrence). - * @param hdma DMA handle. - * @retval None - */ -static void SMARTCARD_DMAAbortOnError(DMA_HandleTypeDef *hdma) -{ - SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); - hsmartcard->RxXferCount = 0U; - hsmartcard->TxXferCount = 0U; - -#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) - /* Call registered user error callback */ - hsmartcard->ErrorCallback(hsmartcard); -#else - /* Call legacy weak user error callback */ - HAL_SMARTCARD_ErrorCallback(hsmartcard); -#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ -} - -/** - * @brief DMA SMARTCARD Tx communication abort callback, when initiated by user - * (To be called at end of DMA Tx Abort procedure following user abort request). - * @note When this callback is executed, User Abort complete call back is called only if no - * Abort still ongoing for Rx DMA Handle. - * @param hdma DMA handle. - * @retval None - */ -static void SMARTCARD_DMATxAbortCallback(DMA_HandleTypeDef *hdma) -{ - SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); - - hsmartcard->hdmatx->XferAbortCallback = NULL; - - /* Check if an Abort process is still ongoing */ - if (hsmartcard->hdmarx != NULL) - { - if (hsmartcard->hdmarx->XferAbortCallback != NULL) - { - return; - } - } - - /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ - hsmartcard->TxXferCount = 0U; - hsmartcard->RxXferCount = 0U; - - /* Reset errorCode */ - hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; - - /* Clear the Error flags in the ICR register */ - __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, - SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | - SMARTCARD_CLEAR_EOBF); - - /* Restore hsmartcard->gState and hsmartcard->RxState to Ready */ - hsmartcard->gState = HAL_SMARTCARD_STATE_READY; - hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; - -#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) - /* Call registered Abort complete callback */ - hsmartcard->AbortCpltCallback(hsmartcard); -#else - /* Call legacy weak Abort complete callback */ - HAL_SMARTCARD_AbortCpltCallback(hsmartcard); -#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ -} - - -/** - * @brief DMA SMARTCARD Rx communication abort callback, when initiated by user - * (To be called at end of DMA Rx Abort procedure following user abort request). - * @note When this callback is executed, User Abort complete call back is called only if no - * Abort still ongoing for Tx DMA Handle. - * @param hdma DMA handle. - * @retval None - */ -static void SMARTCARD_DMARxAbortCallback(DMA_HandleTypeDef *hdma) -{ - SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); - - hsmartcard->hdmarx->XferAbortCallback = NULL; - - /* Check if an Abort process is still ongoing */ - if (hsmartcard->hdmatx != NULL) - { - if (hsmartcard->hdmatx->XferAbortCallback != NULL) - { - return; - } - } - - /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ - hsmartcard->TxXferCount = 0U; - hsmartcard->RxXferCount = 0U; - - /* Reset errorCode */ - hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; - - /* Clear the Error flags in the ICR register */ - __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, - SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | - SMARTCARD_CLEAR_EOBF); - - /* Restore hsmartcard->gState and hsmartcard->RxState to Ready */ - hsmartcard->gState = HAL_SMARTCARD_STATE_READY; - hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; - -#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) - /* Call registered Abort complete callback */ - hsmartcard->AbortCpltCallback(hsmartcard); -#else - /* Call legacy weak Abort complete callback */ - HAL_SMARTCARD_AbortCpltCallback(hsmartcard); -#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ -} - - -/** - * @brief DMA SMARTCARD Tx communication abort callback, when initiated by user by a call to - * HAL_SMARTCARD_AbortTransmit_IT API (Abort only Tx transfer) - * (This callback is executed at end of DMA Tx Abort procedure following user abort request, - * and leads to user Tx Abort Complete callback execution). - * @param hdma DMA handle. - * @retval None - */ -static void SMARTCARD_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma) -{ - SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); - - hsmartcard->TxXferCount = 0U; - - /* Clear the Error flags in the ICR register */ - __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, SMARTCARD_CLEAR_FEF); - - /* Restore hsmartcard->gState to Ready */ - hsmartcard->gState = HAL_SMARTCARD_STATE_READY; - -#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) - /* Call registered Abort Transmit Complete Callback */ - hsmartcard->AbortTransmitCpltCallback(hsmartcard); -#else - /* Call legacy weak Abort Transmit Complete Callback */ - HAL_SMARTCARD_AbortTransmitCpltCallback(hsmartcard); -#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ -} - -/** - * @brief DMA SMARTCARD Rx communication abort callback, when initiated by user by a call to - * HAL_SMARTCARD_AbortReceive_IT API (Abort only Rx transfer) - * (This callback is executed at end of DMA Rx Abort procedure following user abort request, - * and leads to user Rx Abort Complete callback execution). - * @param hdma DMA handle. - * @retval None - */ -static void SMARTCARD_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma) -{ - SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); - - hsmartcard->RxXferCount = 0U; - - /* Clear the Error flags in the ICR register */ - __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, - SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | - SMARTCARD_CLEAR_EOBF); - - /* Restore hsmartcard->RxState to Ready */ - hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; - -#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) - /* Call registered Abort Receive Complete Callback */ - hsmartcard->AbortReceiveCpltCallback(hsmartcard); -#else - /* Call legacy weak Abort Receive Complete Callback */ - HAL_SMARTCARD_AbortReceiveCpltCallback(hsmartcard); -#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ -} - -/** - * @brief Send an amount of data in non-blocking mode. - * @note Function called under interruption only, once - * interruptions have been enabled by HAL_SMARTCARD_Transmit_IT(). - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @retval None - */ -static void SMARTCARD_TxISR(SMARTCARD_HandleTypeDef *hsmartcard) -{ - /* Check that a Tx process is ongoing */ - if (hsmartcard->gState == HAL_SMARTCARD_STATE_BUSY_TX) - { - if (hsmartcard->TxXferCount == 0U) - { - /* Disable the SMARTCARD Transmit Data Register Empty Interrupt */ - CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_TXEIE); - - /* Enable the SMARTCARD Transmit Complete Interrupt */ - __HAL_SMARTCARD_ENABLE_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication); - } - else - { - hsmartcard->Instance->TDR = (uint8_t)(*hsmartcard->pTxBuffPtr & 0xFFU); - hsmartcard->pTxBuffPtr++; - hsmartcard->TxXferCount--; - } - } -} - -/** - * @brief Wrap up transmission in non-blocking mode. - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @retval None - */ -static void SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard) -{ - /* Disable the SMARTCARD Transmit Complete Interrupt */ - __HAL_SMARTCARD_DISABLE_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication); - - /* Check if a receive process is ongoing or not. If not disable ERR IT */ - if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY) - { - /* Disable the SMARTCARD Error Interrupt: (Frame error) */ - CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); - } - - /* Re-enable Rx at end of transmission if initial mode is Rx/Tx */ - if (hsmartcard->Init.Mode == SMARTCARD_MODE_TX_RX) - { - /* Disable the Peripheral first to update modes */ - CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); - SET_BIT(hsmartcard->Instance->CR1, USART_CR1_RE); - /* Enable the Peripheral */ - SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); - } - - /* Tx process is ended, restore hsmartcard->gState to Ready */ - hsmartcard->gState = HAL_SMARTCARD_STATE_READY; - - /* Clear TxISR function pointer */ - hsmartcard->TxISR = NULL; - -#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) - /* Call registered Tx complete callback */ - hsmartcard->TxCpltCallback(hsmartcard); -#else - /* Call legacy weak Tx complete callback */ - HAL_SMARTCARD_TxCpltCallback(hsmartcard); -#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ -} - -/** - * @brief Receive an amount of data in non-blocking mode. - * @note Function called under interruption only, once - * interruptions have been enabled by HAL_SMARTCARD_Receive_IT(). - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @retval None - */ -static void SMARTCARD_RxISR(SMARTCARD_HandleTypeDef *hsmartcard) -{ - /* Check that a Rx process is ongoing */ - if (hsmartcard->RxState == HAL_SMARTCARD_STATE_BUSY_RX) - { - *hsmartcard->pRxBuffPtr = (uint8_t)(hsmartcard->Instance->RDR & (uint8_t)0xFF); - hsmartcard->pRxBuffPtr++; - - hsmartcard->RxXferCount--; - if (hsmartcard->RxXferCount == 0U) - { - CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RXNEIE); - - /* Check if a transmit process is ongoing or not. If not disable ERR IT */ - if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) - { - /* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */ - CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); - } - - /* Disable the SMARTCARD Parity Error Interrupt */ - CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE); - - hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; - - /* Clear RxISR function pointer */ - hsmartcard->RxISR = NULL; - -#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) - /* Call registered Rx complete callback */ - hsmartcard->RxCpltCallback(hsmartcard); -#else - /* Call legacy weak Rx complete callback */ - HAL_SMARTCARD_RxCpltCallback(hsmartcard); -#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ - } - } - else - { - /* Clear RXNE interrupt flag */ - __HAL_SMARTCARD_SEND_REQ(hsmartcard, SMARTCARD_RXDATA_FLUSH_REQUEST); - } -} - -/** - * @} - */ - -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ -#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit