From 6ab94e0b318884bbcb95e2ea3835f951502e1d99 Mon Sep 17 00:00:00 2001 From: jaseg Date: Wed, 14 Oct 2020 12:47:28 +0200 Subject: Move firmware into subdirectory --- .../Src/stm32f0xx_hal_pcd_ex.c | 338 --------------------- 1 file changed, 338 deletions(-) delete mode 100644 hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pcd_ex.c (limited to 'hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pcd_ex.c') diff --git a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pcd_ex.c b/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pcd_ex.c deleted file mode 100644 index 26dd51f..0000000 --- a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pcd_ex.c +++ /dev/null @@ -1,338 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f0xx_hal_pcd_ex.c - * @author MCD Application Team - * @brief PCD Extended HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the USB Peripheral Controller: - * + Extended features functions - * - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f0xx_hal.h" - -/** @addtogroup STM32F0xx_HAL_Driver - * @{ - */ - -/** @defgroup PCDEx PCDEx - * @brief PCD Extended HAL module driver - * @{ - */ - -#ifdef HAL_PCD_MODULE_ENABLED - -#if defined (USB) -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup PCDEx_Exported_Functions PCDEx Exported Functions - * @{ - */ - -/** @defgroup PCDEx_Exported_Functions_Group1 Peripheral Control functions - * @brief PCDEx control functions - * -@verbatim - =============================================================================== - ##### Extended features functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Update FIFO configuration - -@endverbatim - * @{ - */ - -/** - * @brief Configure PMA for EP - * @param hpcd Device instance - * @param ep_addr endpoint address - * @param ep_kind endpoint Kind - * USB_SNG_BUF: Single Buffer used - * USB_DBL_BUF: Double Buffer used - * @param pmaadress: EP address in The PMA: In case of single buffer endpoint - * this parameter is 16-bit value providing the address - * in PMA allocated to endpoint. - * In case of double buffer endpoint this parameter - * is a 32-bit value providing the endpoint buffer 0 address - * in the LSB part of 32-bit value and endpoint buffer 1 address - * in the MSB part of 32-bit value. - * @retval HAL status - */ - -HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd, - uint16_t ep_addr, - uint16_t ep_kind, - uint32_t pmaadress) -{ - PCD_EPTypeDef *ep; - - /* initialize ep structure*/ - if ((0x80U & ep_addr) == 0x80U) - { - ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; - } - else - { - ep = &hpcd->OUT_ep[ep_addr]; - } - - /* Here we check if the endpoint is single or double Buffer*/ - if (ep_kind == PCD_SNG_BUF) - { - /* Single Buffer */ - ep->doublebuffer = 0U; - /* Configure the PMA */ - ep->pmaadress = (uint16_t)pmaadress; - } - else /* USB_DBL_BUF */ - { - /* Double Buffer Endpoint */ - ep->doublebuffer = 1U; - /* Configure the PMA */ - ep->pmaaddr0 = (uint16_t)(pmaadress & 0xFFFFU); - ep->pmaaddr1 = (uint16_t)((pmaadress & 0xFFFF0000U) >> 16); - } - - return HAL_OK; -} - -/** - * @brief Activate BatteryCharging feature. - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd) -{ - USB_TypeDef *USBx = hpcd->Instance; - hpcd->battery_charging_active = 1U; - - /* Enable BCD feature */ - USBx->BCDR |= USB_BCDR_BCDEN; - - /* Enable DCD : Data Contact Detect */ - USBx->BCDR &= ~(USB_BCDR_PDEN); - USBx->BCDR &= ~(USB_BCDR_SDEN); - USBx->BCDR |= USB_BCDR_DCDEN; - - return HAL_OK; -} - -/** - * @brief Deactivate BatteryCharging feature. - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd) -{ - USB_TypeDef *USBx = hpcd->Instance; - hpcd->battery_charging_active = 0U; - - /* Disable BCD feature */ - USBx->BCDR &= ~(USB_BCDR_BCDEN); - - return HAL_OK; -} - -/** - * @brief Handle BatteryCharging Process. - * @param hpcd PCD handle - * @retval HAL status - */ -void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd) -{ - USB_TypeDef *USBx = hpcd->Instance; - uint32_t tickstart = HAL_GetTick(); - - /* Wait Detect flag or a timeout is happen*/ - while ((USBx->BCDR & USB_BCDR_DCDET) == 0U) - { - /* Check for the Timeout */ - if ((HAL_GetTick() - tickstart) > 1000U) - { -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->BCDCallback(hpcd, PCD_BCD_ERROR); -#else - HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_ERROR); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - - return; - } - } - - HAL_Delay(200U); - - /* Data Pin Contact ? Check Detect flag */ - if ((USBx->BCDR & USB_BCDR_DCDET) == USB_BCDR_DCDET) - { -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->BCDCallback(hpcd, PCD_BCD_CONTACT_DETECTION); -#else - HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_CONTACT_DETECTION); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - /* Primary detection: checks if connected to Standard Downstream Port - (without charging capability) */ - USBx->BCDR &= ~(USB_BCDR_DCDEN); - HAL_Delay(50U); - USBx->BCDR |= (USB_BCDR_PDEN); - HAL_Delay(50U); - - /* If Charger detect ? */ - if ((USBx->BCDR & USB_BCDR_PDET) == USB_BCDR_PDET) - { - /* Start secondary detection to check connection to Charging Downstream - Port or Dedicated Charging Port */ - USBx->BCDR &= ~(USB_BCDR_PDEN); - HAL_Delay(50U); - USBx->BCDR |= (USB_BCDR_SDEN); - HAL_Delay(50U); - - /* If CDP ? */ - if ((USBx->BCDR & USB_BCDR_SDET) == USB_BCDR_SDET) - { - /* Dedicated Downstream Port DCP */ -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->BCDCallback(hpcd, PCD_BCD_DEDICATED_CHARGING_PORT); -#else - HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_DEDICATED_CHARGING_PORT); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - else - { - /* Charging Downstream Port CDP */ -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->BCDCallback(hpcd, PCD_BCD_CHARGING_DOWNSTREAM_PORT); -#else - HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_CHARGING_DOWNSTREAM_PORT); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - } - else /* NO */ - { - /* Standard Downstream Port */ -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->BCDCallback(hpcd, PCD_BCD_STD_DOWNSTREAM_PORT); -#else - HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_STD_DOWNSTREAM_PORT); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - - /* Battery Charging capability discovery finished Start Enumeration */ - (void)HAL_PCDEx_DeActivateBCD(hpcd); -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->BCDCallback(hpcd, PCD_BCD_DISCOVERY_COMPLETED); -#else - HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_DISCOVERY_COMPLETED); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ -} - - -/** - * @brief Activate LPM feature. - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd) -{ - - USB_TypeDef *USBx = hpcd->Instance; - hpcd->lpm_active = 1U; - hpcd->LPM_State = LPM_L0; - - USBx->LPMCSR |= USB_LPMCSR_LMPEN; - USBx->LPMCSR |= USB_LPMCSR_LPMACK; - - return HAL_OK; -} - -/** - * @brief Deactivate LPM feature. - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd) -{ - USB_TypeDef *USBx = hpcd->Instance; - - hpcd->lpm_active = 0U; - - USBx->LPMCSR &= ~(USB_LPMCSR_LMPEN); - USBx->LPMCSR &= ~(USB_LPMCSR_LPMACK); - - return HAL_OK; -} - - - -/** - * @brief Send LPM message to user layer callback. - * @param hpcd PCD handle - * @param msg LPM message - * @retval HAL status - */ -__weak void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - UNUSED(msg); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCDEx_LPM_Callback could be implemented in the user file - */ -} - -/** - * @brief Send BatteryCharging message to user layer callback. - * @param hpcd PCD handle - * @param msg LPM message - * @retval HAL status - */ -__weak void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - UNUSED(msg); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCDEx_BCD_Callback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** - * @} - */ -#endif /* defined (USB) */ -#endif /* HAL_PCD_MODULE_ENABLED */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit