From 6ab94e0b318884bbcb95e2ea3835f951502e1d99 Mon Sep 17 00:00:00 2001 From: jaseg Date: Wed, 14 Oct 2020 12:47:28 +0200 Subject: Move firmware into subdirectory --- .../STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2s.c | 1800 -------------------- 1 file changed, 1800 deletions(-) delete mode 100644 hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2s.c (limited to 'hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2s.c') diff --git a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2s.c b/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2s.c deleted file mode 100644 index 55aff5e..0000000 --- a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2s.c +++ /dev/null @@ -1,1800 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f0xx_hal_i2s.c - * @author MCD Application Team - * @brief I2S HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Integrated Interchip Sound (I2S) peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral State and Errors functions - @verbatim - =============================================================================== - ##### How to use this driver ##### - =============================================================================== - [..] - The I2S HAL driver can be used as follow: - - (#) Declare a I2S_HandleTypeDef handle structure. - (#) Initialize the I2S low level resources by implement the HAL_I2S_MspInit() API: - (##) Enable the SPIx interface clock. - (##) I2S pins configuration: - (+++) Enable the clock for the I2S GPIOs. - (+++) Configure these I2S pins as alternate function pull-up. - (##) NVIC configuration if you need to use interrupt process (HAL_I2S_Transmit_IT() - and HAL_I2S_Receive_IT() APIs). - (+++) Configure the I2Sx interrupt priority. - (+++) Enable the NVIC I2S IRQ handle. - (##) DMA Configuration if you need to use DMA process (HAL_I2S_Transmit_DMA() - and HAL_I2S_Receive_DMA() APIs: - (+++) Declare a DMA handle structure for the Tx/Rx Stream/Channel. - (+++) Enable the DMAx interface clock. - (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. - (+++) Configure the DMA Tx/Rx Stream/Channel. - (+++) Associate the initialized DMA handle to the I2S DMA Tx/Rx handle. - (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the - DMA Tx/Rx Stream/Channel. - - (#) Program the Mode, Standard, Data Format, MCLK Output, Audio frequency and Polarity - using HAL_I2S_Init() function. - - -@- The specific I2S interrupts (Transmission complete interrupt, - RXNE interrupt and Error Interrupts) will be managed using the macros - __HAL_I2S_ENABLE_IT() and __HAL_I2S_DISABLE_IT() inside the transmit and receive process. - -@- Make sure that either: - (+@) External clock source is configured after setting correctly - the define constant EXTERNAL_CLOCK_VALUE in the stm32f0xx_hal_conf.h file. - - (#) Three mode of operations are available within this driver : - - *** Polling mode IO operation *** - ================================= - [..] - (+) Send an amount of data in blocking mode using HAL_I2S_Transmit() - (+) Receive an amount of data in blocking mode using HAL_I2S_Receive() - - *** Interrupt mode IO operation *** - =================================== - [..] - (+) Send an amount of data in non blocking mode using HAL_I2S_Transmit_IT() - (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can - add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback - (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can - add his own code by customization of function pointer HAL_I2S_TxCpltCallback - (+) Receive an amount of data in non blocking mode using HAL_I2S_Receive_IT() - (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can - add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback - (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can - add his own code by customization of function pointer HAL_I2S_RxCpltCallback - (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_I2S_ErrorCallback - - *** DMA mode IO operation *** - ============================== - [..] - (+) Send an amount of data in non blocking mode (DMA) using HAL_I2S_Transmit_DMA() - (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can - add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback - (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can - add his own code by customization of function pointer HAL_I2S_TxCpltCallback - (+) Receive an amount of data in non blocking mode (DMA) using HAL_I2S_Receive_DMA() - (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can - add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback - (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can - add his own code by customization of function pointer HAL_I2S_RxCpltCallback - (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_I2S_ErrorCallback - (+) Pause the DMA Transfer using HAL_I2S_DMAPause() - (+) Resume the DMA Transfer using HAL_I2S_DMAResume() - (+) Stop the DMA Transfer using HAL_I2S_DMAStop() - - *** I2S HAL driver macros list *** - =================================== - [..] - Below the list of most used macros in I2S HAL driver. - - (+) __HAL_I2S_ENABLE: Enable the specified SPI peripheral (in I2S mode) - (+) __HAL_I2S_DISABLE: Disable the specified SPI peripheral (in I2S mode) - (+) __HAL_I2S_ENABLE_IT : Enable the specified I2S interrupts - (+) __HAL_I2S_DISABLE_IT : Disable the specified I2S interrupts - (+) __HAL_I2S_GET_FLAG: Check whether the specified I2S flag is set or not - - [..] - (@) You can refer to the I2S HAL driver header file for more useful macros - - *** I2S HAL driver macros list *** - =================================== - [..] - Callback registration: - - (#) The compilation flag USE_HAL_I2S_REGISTER_CALLBACKS when set to 1U - allows the user to configure dynamically the driver callbacks. - Use Functions HAL_I2S_RegisterCallback() to register an interrupt callback. - - Function HAL_I2S_RegisterCallback() allows to register following callbacks: - (++) TxCpltCallback : I2S Tx Completed callback - (++) RxCpltCallback : I2S Rx Completed callback - (++) TxHalfCpltCallback : I2S Tx Half Completed callback - (++) RxHalfCpltCallback : I2S Rx Half Completed callback - (++) ErrorCallback : I2S Error callback - (++) MspInitCallback : I2S Msp Init callback - (++) MspDeInitCallback : I2S Msp DeInit callback - This function takes as parameters the HAL peripheral handle, the Callback ID - and a pointer to the user callback function. - - - (#) Use function HAL_I2S_UnRegisterCallback to reset a callback to the default - weak function. - HAL_I2S_UnRegisterCallback takes as parameters the HAL peripheral handle, - and the Callback ID. - This function allows to reset following callbacks: - (++) TxCpltCallback : I2S Tx Completed callback - (++) RxCpltCallback : I2S Rx Completed callback - (++) TxHalfCpltCallback : I2S Tx Half Completed callback - (++) RxHalfCpltCallback : I2S Rx Half Completed callback - (++) ErrorCallback : I2S Error callback - (++) MspInitCallback : I2S Msp Init callback - (++) MspDeInitCallback : I2S Msp DeInit callback - - [..] - By default, after the HAL_I2S_Init() and when the state is HAL_I2S_STATE_RESET - all callbacks are set to the corresponding weak functions: - examples HAL_I2S_MasterTxCpltCallback(), HAL_I2S_MasterRxCpltCallback(). - Exception done for MspInit and MspDeInit functions that are - reset to the legacy weak functions in the HAL_I2S_Init()/ HAL_I2S_DeInit() only when - these callbacks are null (not registered beforehand). - If MspInit or MspDeInit are not null, the HAL_I2S_Init()/ HAL_I2S_DeInit() - keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. - - [..] - Callbacks can be registered/unregistered in HAL_I2S_STATE_READY state only. - Exception done MspInit/MspDeInit functions that can be registered/unregistered - in HAL_I2S_STATE_READY or HAL_I2S_STATE_RESET state, - thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. - Then, the user first registers the MspInit/MspDeInit user callbacks - using HAL_I2S_RegisterCallback() before calling HAL_I2S_DeInit() - or HAL_I2S_Init() function. - - [..] - When the compilation define USE_HAL_I2S_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registering feature is not available - and weak (surcharged) callbacks are used. - - @endverbatim - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f0xx_hal.h" - -#ifdef HAL_I2S_MODULE_ENABLED - -#if defined(SPI_I2S_SUPPORT) -/** @addtogroup STM32F0xx_HAL_Driver - * @{ - */ - -/** @defgroup I2S I2S - * @brief I2S HAL module driver - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @defgroup I2S_Private_Functions I2S Private Functions - * @{ - */ -static void I2S_DMATxCplt(DMA_HandleTypeDef *hdma); -static void I2S_DMATxHalfCplt(DMA_HandleTypeDef *hdma); -static void I2S_DMARxCplt(DMA_HandleTypeDef *hdma); -static void I2S_DMARxHalfCplt(DMA_HandleTypeDef *hdma); -static void I2S_DMAError(DMA_HandleTypeDef *hdma); -static void I2S_Transmit_IT(I2S_HandleTypeDef *hi2s); -static void I2S_Receive_IT(I2S_HandleTypeDef *hi2s); -static HAL_StatusTypeDef I2S_WaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, uint32_t Flag, FlagStatus State, - uint32_t Timeout); -/** - * @} - */ - -/* Exported functions ---------------------------------------------------------*/ - -/** @defgroup I2S_Exported_Functions I2S Exported Functions - * @{ - */ - -/** @defgroup I2S_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] This subsection provides a set of functions allowing to initialize and - de-initialize the I2Sx peripheral in simplex mode: - - (+) User must Implement HAL_I2S_MspInit() function in which he configures - all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). - - (+) Call the function HAL_I2S_Init() to configure the selected device with - the selected configuration: - (++) Mode - (++) Standard - (++) Data Format - (++) MCLK Output - (++) Audio frequency - (++) Polarity - - (+) Call the function HAL_I2S_DeInit() to restore the default configuration - of the selected I2Sx peripheral. - @endverbatim - * @{ - */ - -/** - * @brief Initializes the I2S according to the specified parameters - * in the I2S_InitTypeDef and create the associated handle. - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s) -{ - uint32_t i2sdiv; - uint32_t i2sodd; - uint32_t packetlength; - uint32_t tmp; - uint32_t i2sclk; - - /* Check the I2S handle allocation */ - if (hi2s == NULL) - { - return HAL_ERROR; - } - - /* Check the I2S parameters */ - assert_param(IS_I2S_ALL_INSTANCE(hi2s->Instance)); - assert_param(IS_I2S_MODE(hi2s->Init.Mode)); - assert_param(IS_I2S_STANDARD(hi2s->Init.Standard)); - assert_param(IS_I2S_DATA_FORMAT(hi2s->Init.DataFormat)); - assert_param(IS_I2S_MCLK_OUTPUT(hi2s->Init.MCLKOutput)); - assert_param(IS_I2S_AUDIO_FREQ(hi2s->Init.AudioFreq)); - assert_param(IS_I2S_CPOL(hi2s->Init.CPOL)); - - if (hi2s->State == HAL_I2S_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hi2s->Lock = HAL_UNLOCKED; - -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - /* Init the I2S Callback settings */ - hi2s->TxCpltCallback = HAL_I2S_TxCpltCallback; /* Legacy weak TxCpltCallback */ - hi2s->RxCpltCallback = HAL_I2S_RxCpltCallback; /* Legacy weak RxCpltCallback */ - hi2s->TxHalfCpltCallback = HAL_I2S_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ - hi2s->RxHalfCpltCallback = HAL_I2S_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ - hi2s->ErrorCallback = HAL_I2S_ErrorCallback; /* Legacy weak ErrorCallback */ - - if (hi2s->MspInitCallback == NULL) - { - hi2s->MspInitCallback = HAL_I2S_MspInit; /* Legacy weak MspInit */ - } - - /* Init the low level hardware : GPIO, CLOCK, NVIC... */ - hi2s->MspInitCallback(hi2s); -#else - /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ - HAL_I2S_MspInit(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ - } - - hi2s->State = HAL_I2S_STATE_BUSY; - - /*----------------------- SPIx I2SCFGR & I2SPR Configuration ----------------*/ - /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */ - CLEAR_BIT(hi2s->Instance->I2SCFGR, (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CKPOL | \ - SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC | SPI_I2SCFGR_I2SCFG | \ - SPI_I2SCFGR_I2SE | SPI_I2SCFGR_I2SMOD)); - hi2s->Instance->I2SPR = 0x0002U; - - /*----------------------- I2SPR: I2SDIV and ODD Calculation -----------------*/ - /* If the requested audio frequency is not the default, compute the prescaler */ - if (hi2s->Init.AudioFreq != I2S_AUDIOFREQ_DEFAULT) - { - /* Check the frame length (For the Prescaler computing) ********************/ - if (hi2s->Init.DataFormat == I2S_DATAFORMAT_16B) - { - /* Packet length is 16 bits */ - packetlength = 16U; - } - else - { - /* Packet length is 32 bits */ - packetlength = 32U; - } - - /* I2S standard */ - if (hi2s->Init.Standard <= I2S_STANDARD_LSB) - { - /* In I2S standard packet lenght is multiplied by 2 */ - packetlength = packetlength * 2U; - } - - /* Get the source clock value: based on System Clock value */ - i2sclk = HAL_RCC_GetSysClockFreq(); - - /* Compute the Real divider depending on the MCLK output state, with a floating point */ - if (hi2s->Init.MCLKOutput == I2S_MCLKOUTPUT_ENABLE) - { - /* MCLK output is enabled */ - if (hi2s->Init.DataFormat != I2S_DATAFORMAT_16B) - { - tmp = (uint32_t)(((((i2sclk / (packetlength * 4U)) * 10U) / hi2s->Init.AudioFreq)) + 5U); - } - else - { - tmp = (uint32_t)(((((i2sclk / (packetlength * 8U)) * 10U) / hi2s->Init.AudioFreq)) + 5U); - } - } - else - { - /* MCLK output is disabled */ - tmp = (uint32_t)(((((i2sclk / packetlength) * 10U) / hi2s->Init.AudioFreq)) + 5U); - } - - /* Remove the flatting point */ - tmp = tmp / 10U; - - /* Check the parity of the divider */ - i2sodd = (uint32_t)(tmp & (uint32_t)1U); - - /* Compute the i2sdiv prescaler */ - i2sdiv = (uint32_t)((tmp - i2sodd) / 2U); - - /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */ - i2sodd = (uint32_t)(i2sodd << 8U); - } - else - { - /* Set the default values */ - i2sdiv = 2U; - i2sodd = 0U; - } - - /* Test if the divider is 1 or 0 or greater than 0xFF */ - if ((i2sdiv < 2U) || (i2sdiv > 0xFFU)) - { - /* Set the error code and execute error callback*/ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_PRESCALER); - return HAL_ERROR; - } - - /*----------------------- SPIx I2SCFGR & I2SPR Configuration ----------------*/ - - /* Write to SPIx I2SPR register the computed value */ - hi2s->Instance->I2SPR = (uint32_t)((uint32_t)i2sdiv | (uint32_t)(i2sodd | (uint32_t)hi2s->Init.MCLKOutput)); - - /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */ - /* And configure the I2S with the I2S_InitStruct values */ - MODIFY_REG(hi2s->Instance->I2SCFGR, (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | \ - SPI_I2SCFGR_CKPOL | SPI_I2SCFGR_I2SSTD | \ - SPI_I2SCFGR_PCMSYNC | SPI_I2SCFGR_I2SCFG | \ - SPI_I2SCFGR_I2SE | SPI_I2SCFGR_I2SMOD), \ - (SPI_I2SCFGR_I2SMOD | hi2s->Init.Mode | \ - hi2s->Init.Standard | hi2s->Init.DataFormat | \ - hi2s->Init.CPOL)); - -#if defined(SPI_I2SCFGR_ASTRTEN) - if ((hi2s->Init.Standard == I2S_STANDARD_PCM_SHORT) || ((hi2s->Init.Standard == I2S_STANDARD_PCM_LONG))) - { - /* Write to SPIx I2SCFGR */ - SET_BIT(hi2s->Instance->I2SCFGR, SPI_I2SCFGR_ASTRTEN); - } -#endif /* SPI_I2SCFGR_ASTRTEN */ - - hi2s->ErrorCode = HAL_I2S_ERROR_NONE; - hi2s->State = HAL_I2S_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the I2S peripheral - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2S_DeInit(I2S_HandleTypeDef *hi2s) -{ - /* Check the I2S handle allocation */ - if (hi2s == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_I2S_ALL_INSTANCE(hi2s->Instance)); - - hi2s->State = HAL_I2S_STATE_BUSY; - - /* Disable the I2S Peripheral Clock */ - __HAL_I2S_DISABLE(hi2s); - -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - if (hi2s->MspDeInitCallback == NULL) - { - hi2s->MspDeInitCallback = HAL_I2S_MspDeInit; /* Legacy weak MspDeInit */ - } - - /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ - hi2s->MspDeInitCallback(hi2s); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ - HAL_I2S_MspDeInit(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ - - hi2s->ErrorCode = HAL_I2S_ERROR_NONE; - hi2s->State = HAL_I2S_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(hi2s); - - return HAL_OK; -} - -/** - * @brief I2S MSP Init - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @retval None - */ -__weak void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2s); - - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_I2S_MspInit could be implemented in the user file - */ -} - -/** - * @brief I2S MSP DeInit - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @retval None - */ -__weak void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2s); - - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_I2S_MspDeInit could be implemented in the user file - */ -} - -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) -/** - * @brief Register a User I2S Callback - * To be used instead of the weak predefined callback - * @param hi2s Pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for the specified I2S. - * @param CallbackID ID of the callback to be registered - * @param pCallback pointer to the Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2S_RegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID, - pI2S_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hi2s->ErrorCode |= HAL_I2S_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(hi2s); - - if (HAL_I2S_STATE_READY == hi2s->State) - { - switch (CallbackID) - { - case HAL_I2S_TX_COMPLETE_CB_ID : - hi2s->TxCpltCallback = pCallback; - break; - - case HAL_I2S_RX_COMPLETE_CB_ID : - hi2s->RxCpltCallback = pCallback; - break; - - case HAL_I2S_TX_HALF_COMPLETE_CB_ID : - hi2s->TxHalfCpltCallback = pCallback; - break; - - case HAL_I2S_RX_HALF_COMPLETE_CB_ID : - hi2s->RxHalfCpltCallback = pCallback; - break; - - case HAL_I2S_ERROR_CB_ID : - hi2s->ErrorCallback = pCallback; - break; - - case HAL_I2S_MSPINIT_CB_ID : - hi2s->MspInitCallback = pCallback; - break; - - case HAL_I2S_MSPDEINIT_CB_ID : - hi2s->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_I2S_STATE_RESET == hi2s->State) - { - switch (CallbackID) - { - case HAL_I2S_MSPINIT_CB_ID : - hi2s->MspInitCallback = pCallback; - break; - - case HAL_I2S_MSPDEINIT_CB_ID : - hi2s->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hi2s); - return status; -} - -/** - * @brief Unregister an I2S Callback - * I2S callback is redirected to the weak predefined callback - * @param hi2s Pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for the specified I2S. - * @param CallbackID ID of the callback to be unregistered - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2S_UnRegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hi2s); - - if (HAL_I2S_STATE_READY == hi2s->State) - { - switch (CallbackID) - { - case HAL_I2S_TX_COMPLETE_CB_ID : - hi2s->TxCpltCallback = HAL_I2S_TxCpltCallback; /* Legacy weak TxCpltCallback */ - break; - - case HAL_I2S_RX_COMPLETE_CB_ID : - hi2s->RxCpltCallback = HAL_I2S_RxCpltCallback; /* Legacy weak RxCpltCallback */ - break; - - case HAL_I2S_TX_HALF_COMPLETE_CB_ID : - hi2s->TxHalfCpltCallback = HAL_I2S_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ - break; - - case HAL_I2S_RX_HALF_COMPLETE_CB_ID : - hi2s->RxHalfCpltCallback = HAL_I2S_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ - break; - - case HAL_I2S_ERROR_CB_ID : - hi2s->ErrorCallback = HAL_I2S_ErrorCallback; /* Legacy weak ErrorCallback */ - break; - - case HAL_I2S_MSPINIT_CB_ID : - hi2s->MspInitCallback = HAL_I2S_MspInit; /* Legacy weak MspInit */ - break; - - case HAL_I2S_MSPDEINIT_CB_ID : - hi2s->MspDeInitCallback = HAL_I2S_MspDeInit; /* Legacy weak MspDeInit */ - break; - - default : - /* Update the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_I2S_STATE_RESET == hi2s->State) - { - switch (CallbackID) - { - case HAL_I2S_MSPINIT_CB_ID : - hi2s->MspInitCallback = HAL_I2S_MspInit; /* Legacy weak MspInit */ - break; - - case HAL_I2S_MSPDEINIT_CB_ID : - hi2s->MspDeInitCallback = HAL_I2S_MspDeInit; /* Legacy weak MspDeInit */ - break; - - default : - /* Update the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hi2s); - return status; -} -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @defgroup I2S_Exported_Functions_Group2 IO operation functions - * @brief Data transfers functions - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the I2S data - transfers. - - (#) There are two modes of transfer: - (++) Blocking mode : The communication is performed in the polling mode. - The status of all data processing is returned by the same function - after finishing transfer. - (++) No-Blocking mode : The communication is performed using Interrupts - or DMA. These functions return the status of the transfer startup. - The end of the data processing will be indicated through the - dedicated I2S IRQ when using Interrupt mode or the DMA IRQ when - using DMA mode. - - (#) Blocking mode functions are : - (++) HAL_I2S_Transmit() - (++) HAL_I2S_Receive() - - (#) No-Blocking mode functions with Interrupt are : - (++) HAL_I2S_Transmit_IT() - (++) HAL_I2S_Receive_IT() - - (#) No-Blocking mode functions with DMA are : - (++) HAL_I2S_Transmit_DMA() - (++) HAL_I2S_Receive_DMA() - - (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: - (++) HAL_I2S_TxCpltCallback() - (++) HAL_I2S_RxCpltCallback() - (++) HAL_I2S_ErrorCallback() - -@endverbatim - * @{ - */ - -/** - * @brief Transmit an amount of data in blocking mode - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @param pData a 16-bit pointer to data buffer. - * @param Size number of data sample to be sent: - * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S - * configuration phase, the Size parameter means the number of 16-bit data length - * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected - * the Size parameter means the number of 16-bit data length. - * @param Timeout Timeout duration - * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization - * between Master and Slave(example: audio streaming). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout) -{ - uint32_t tmpreg_cfgr; - - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2s); - - if (hi2s->State != HAL_I2S_STATE_READY) - { - __HAL_UNLOCK(hi2s); - return HAL_BUSY; - } - - /* Set state and reset error code */ - hi2s->State = HAL_I2S_STATE_BUSY_TX; - hi2s->ErrorCode = HAL_I2S_ERROR_NONE; - hi2s->pTxBuffPtr = pData; - - tmpreg_cfgr = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); - - if ((tmpreg_cfgr == I2S_DATAFORMAT_24B) || (tmpreg_cfgr == I2S_DATAFORMAT_32B)) - { - hi2s->TxXferSize = (Size << 1U); - hi2s->TxXferCount = (Size << 1U); - } - else - { - hi2s->TxXferSize = Size; - hi2s->TxXferCount = Size; - } - - tmpreg_cfgr = hi2s->Instance->I2SCFGR; - - /* Check if the I2S is already enabled */ - if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) - { - /* Enable I2S peripheral */ - __HAL_I2S_ENABLE(hi2s); - } - - /* Wait until TXE flag is set */ - if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, SET, Timeout) != HAL_OK) - { - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); - hi2s->State = HAL_I2S_STATE_READY; - __HAL_UNLOCK(hi2s); - return HAL_ERROR; - } - - while (hi2s->TxXferCount > 0U) - { - hi2s->Instance->DR = (*hi2s->pTxBuffPtr); - hi2s->pTxBuffPtr++; - hi2s->TxXferCount--; - - /* Wait until TXE flag is set */ - if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, SET, Timeout) != HAL_OK) - { - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); - hi2s->State = HAL_I2S_STATE_READY; - __HAL_UNLOCK(hi2s); - return HAL_ERROR; - } - - /* Check if an underrun occurs */ - if (__HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_UDR) == SET) - { - /* Clear underrun flag */ - __HAL_I2S_CLEAR_UDRFLAG(hi2s); - - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_UDR); - } - } - - /* Check if Slave mode is selected */ - if (((tmpreg_cfgr & SPI_I2SCFGR_I2SCFG) == I2S_MODE_SLAVE_TX) - || ((tmpreg_cfgr & SPI_I2SCFGR_I2SCFG) == I2S_MODE_SLAVE_RX)) - { - /* Wait until Busy flag is reset */ - if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_BSY, RESET, Timeout) != HAL_OK) - { - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); - hi2s->State = HAL_I2S_STATE_READY; - __HAL_UNLOCK(hi2s); - return HAL_ERROR; - } - } - - hi2s->State = HAL_I2S_STATE_READY; - __HAL_UNLOCK(hi2s); - return HAL_OK; -} - -/** - * @brief Receive an amount of data in blocking mode - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @param pData a 16-bit pointer to data buffer. - * @param Size number of data sample to be sent: - * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S - * configuration phase, the Size parameter means the number of 16-bit data length - * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected - * the Size parameter means the number of 16-bit data length. - * @param Timeout Timeout duration - * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization - * between Master and Slave(example: audio streaming). - * @note In I2S Master Receiver mode, just after enabling the peripheral the clock will be generate - * in continuous way and as the I2S is not disabled at the end of the I2S transaction. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout) -{ - uint32_t tmpreg_cfgr; - - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2s); - - if (hi2s->State != HAL_I2S_STATE_READY) - { - __HAL_UNLOCK(hi2s); - return HAL_BUSY; - } - - /* Set state and reset error code */ - hi2s->State = HAL_I2S_STATE_BUSY_RX; - hi2s->ErrorCode = HAL_I2S_ERROR_NONE; - hi2s->pRxBuffPtr = pData; - - tmpreg_cfgr = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); - - if ((tmpreg_cfgr == I2S_DATAFORMAT_24B) || (tmpreg_cfgr == I2S_DATAFORMAT_32B)) - { - hi2s->RxXferSize = (Size << 1U); - hi2s->RxXferCount = (Size << 1U); - } - else - { - hi2s->RxXferSize = Size; - hi2s->RxXferCount = Size; - } - - /* Check if the I2S is already enabled */ - if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) - { - /* Enable I2S peripheral */ - __HAL_I2S_ENABLE(hi2s); - } - - /* Check if Master Receiver mode is selected */ - if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX) - { - /* Clear the Overrun Flag by a read operation on the SPI_DR register followed by a read - access to the SPI_SR register. */ - __HAL_I2S_CLEAR_OVRFLAG(hi2s); - } - - /* Receive data */ - while (hi2s->RxXferCount > 0U) - { - /* Wait until RXNE flag is set */ - if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_RXNE, SET, Timeout) != HAL_OK) - { - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); - hi2s->State = HAL_I2S_STATE_READY; - __HAL_UNLOCK(hi2s); - return HAL_ERROR; - } - - (*hi2s->pRxBuffPtr) = (uint16_t)hi2s->Instance->DR; - hi2s->pRxBuffPtr++; - hi2s->RxXferCount--; - - /* Check if an overrun occurs */ - if (__HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_OVR) == SET) - { - /* Clear overrun flag */ - __HAL_I2S_CLEAR_OVRFLAG(hi2s); - - /* Set the error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_OVR); - } - } - - hi2s->State = HAL_I2S_STATE_READY; - __HAL_UNLOCK(hi2s); - return HAL_OK; -} - -/** - * @brief Transmit an amount of data in non-blocking mode with Interrupt - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @param pData a 16-bit pointer to data buffer. - * @param Size number of data sample to be sent: - * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S - * configuration phase, the Size parameter means the number of 16-bit data length - * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected - * the Size parameter means the number of 16-bit data length. - * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization - * between Master and Slave(example: audio streaming). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size) -{ - uint32_t tmpreg_cfgr; - - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2s); - - if (hi2s->State != HAL_I2S_STATE_READY) - { - __HAL_UNLOCK(hi2s); - return HAL_BUSY; - } - - /* Set state and reset error code */ - hi2s->State = HAL_I2S_STATE_BUSY_TX; - hi2s->ErrorCode = HAL_I2S_ERROR_NONE; - hi2s->pTxBuffPtr = pData; - - tmpreg_cfgr = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); - - if ((tmpreg_cfgr == I2S_DATAFORMAT_24B) || (tmpreg_cfgr == I2S_DATAFORMAT_32B)) - { - hi2s->TxXferSize = (Size << 1U); - hi2s->TxXferCount = (Size << 1U); - } - else - { - hi2s->TxXferSize = Size; - hi2s->TxXferCount = Size; - } - - /* Enable TXE and ERR interrupt */ - __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); - - /* Check if the I2S is already enabled */ - if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) - { - /* Enable I2S peripheral */ - __HAL_I2S_ENABLE(hi2s); - } - - __HAL_UNLOCK(hi2s); - return HAL_OK; -} - -/** - * @brief Receive an amount of data in non-blocking mode with Interrupt - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @param pData a 16-bit pointer to the Receive data buffer. - * @param Size number of data sample to be sent: - * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S - * configuration phase, the Size parameter means the number of 16-bit data length - * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected - * the Size parameter means the number of 16-bit data length. - * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization - * between Master and Slave(example: audio streaming). - * @note It is recommended to use DMA for the I2S receiver to avoid de-synchronization - * between Master and Slave otherwise the I2S interrupt should be optimized. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size) -{ - uint32_t tmpreg_cfgr; - - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2s); - - if (hi2s->State != HAL_I2S_STATE_READY) - { - __HAL_UNLOCK(hi2s); - return HAL_BUSY; - } - - /* Set state and reset error code */ - hi2s->State = HAL_I2S_STATE_BUSY_RX; - hi2s->ErrorCode = HAL_I2S_ERROR_NONE; - hi2s->pRxBuffPtr = pData; - - tmpreg_cfgr = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); - - if ((tmpreg_cfgr == I2S_DATAFORMAT_24B) || (tmpreg_cfgr == I2S_DATAFORMAT_32B)) - { - hi2s->RxXferSize = (Size << 1U); - hi2s->RxXferCount = (Size << 1U); - } - else - { - hi2s->RxXferSize = Size; - hi2s->RxXferCount = Size; - } - - /* Enable RXNE and ERR interrupt */ - __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); - - /* Check if the I2S is already enabled */ - if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) - { - /* Enable I2S peripheral */ - __HAL_I2S_ENABLE(hi2s); - } - - __HAL_UNLOCK(hi2s); - return HAL_OK; -} - -/** - * @brief Transmit an amount of data in non-blocking mode with DMA - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @param pData a 16-bit pointer to the Transmit data buffer. - * @param Size number of data sample to be sent: - * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S - * configuration phase, the Size parameter means the number of 16-bit data length - * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected - * the Size parameter means the number of 16-bit data length. - * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization - * between Master and Slave(example: audio streaming). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size) -{ - uint32_t tmpreg_cfgr; - - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2s); - - if (hi2s->State != HAL_I2S_STATE_READY) - { - __HAL_UNLOCK(hi2s); - return HAL_BUSY; - } - - /* Set state and reset error code */ - hi2s->State = HAL_I2S_STATE_BUSY_TX; - hi2s->ErrorCode = HAL_I2S_ERROR_NONE; - hi2s->pTxBuffPtr = pData; - - tmpreg_cfgr = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); - - if ((tmpreg_cfgr == I2S_DATAFORMAT_24B) || (tmpreg_cfgr == I2S_DATAFORMAT_32B)) - { - hi2s->TxXferSize = (Size << 1U); - hi2s->TxXferCount = (Size << 1U); - } - else - { - hi2s->TxXferSize = Size; - hi2s->TxXferCount = Size; - } - - /* Set the I2S Tx DMA Half transfer complete callback */ - hi2s->hdmatx->XferHalfCpltCallback = I2S_DMATxHalfCplt; - - /* Set the I2S Tx DMA transfer complete callback */ - hi2s->hdmatx->XferCpltCallback = I2S_DMATxCplt; - - /* Set the DMA error callback */ - hi2s->hdmatx->XferErrorCallback = I2S_DMAError; - - /* Enable the Tx DMA Stream/Channel */ - if (HAL_OK != HAL_DMA_Start_IT(hi2s->hdmatx, - (uint32_t)hi2s->pTxBuffPtr, - (uint32_t)&hi2s->Instance->DR, - hi2s->TxXferSize)) - { - /* Update SPI error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); - hi2s->State = HAL_I2S_STATE_READY; - - __HAL_UNLOCK(hi2s); - return HAL_ERROR; - } - - /* Check if the I2S is already enabled */ - if (HAL_IS_BIT_CLR(hi2s->Instance->I2SCFGR, SPI_I2SCFGR_I2SE)) - { - /* Enable I2S peripheral */ - __HAL_I2S_ENABLE(hi2s); - } - - /* Check if the I2S Tx request is already enabled */ - if (HAL_IS_BIT_CLR(hi2s->Instance->CR2, SPI_CR2_TXDMAEN)) - { - /* Enable Tx DMA Request */ - SET_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); - } - - __HAL_UNLOCK(hi2s); - return HAL_OK; -} - -/** - * @brief Receive an amount of data in non-blocking mode with DMA - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @param pData a 16-bit pointer to the Receive data buffer. - * @param Size number of data sample to be sent: - * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S - * configuration phase, the Size parameter means the number of 16-bit data length - * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected - * the Size parameter means the number of 16-bit data length. - * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization - * between Master and Slave(example: audio streaming). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size) -{ - uint32_t tmpreg_cfgr; - - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2s); - - if (hi2s->State != HAL_I2S_STATE_READY) - { - __HAL_UNLOCK(hi2s); - return HAL_BUSY; - } - - /* Set state and reset error code */ - hi2s->State = HAL_I2S_STATE_BUSY_RX; - hi2s->ErrorCode = HAL_I2S_ERROR_NONE; - hi2s->pRxBuffPtr = pData; - - tmpreg_cfgr = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); - - if ((tmpreg_cfgr == I2S_DATAFORMAT_24B) || (tmpreg_cfgr == I2S_DATAFORMAT_32B)) - { - hi2s->RxXferSize = (Size << 1U); - hi2s->RxXferCount = (Size << 1U); - } - else - { - hi2s->RxXferSize = Size; - hi2s->RxXferCount = Size; - } - - /* Set the I2S Rx DMA Half transfer complete callback */ - hi2s->hdmarx->XferHalfCpltCallback = I2S_DMARxHalfCplt; - - /* Set the I2S Rx DMA transfer complete callback */ - hi2s->hdmarx->XferCpltCallback = I2S_DMARxCplt; - - /* Set the DMA error callback */ - hi2s->hdmarx->XferErrorCallback = I2S_DMAError; - - /* Check if Master Receiver mode is selected */ - if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX) - { - /* Clear the Overrun Flag by a read operation to the SPI_DR register followed by a read - access to the SPI_SR register. */ - __HAL_I2S_CLEAR_OVRFLAG(hi2s); - } - - /* Enable the Rx DMA Stream/Channel */ - if (HAL_OK != HAL_DMA_Start_IT(hi2s->hdmarx, (uint32_t)&hi2s->Instance->DR, (uint32_t)hi2s->pRxBuffPtr, - hi2s->RxXferSize)) - { - /* Update SPI error code */ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); - hi2s->State = HAL_I2S_STATE_READY; - - __HAL_UNLOCK(hi2s); - return HAL_ERROR; - } - - /* Check if the I2S is already enabled */ - if (HAL_IS_BIT_CLR(hi2s->Instance->I2SCFGR, SPI_I2SCFGR_I2SE)) - { - /* Enable I2S peripheral */ - __HAL_I2S_ENABLE(hi2s); - } - - /* Check if the I2S Rx request is already enabled */ - if (HAL_IS_BIT_CLR(hi2s->Instance->CR2, SPI_CR2_RXDMAEN)) - { - /* Enable Rx DMA Request */ - SET_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); - } - - __HAL_UNLOCK(hi2s); - return HAL_OK; -} - -/** - * @brief Pauses the audio DMA Stream/Channel playing from the Media. - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s) -{ - /* Process Locked */ - __HAL_LOCK(hi2s); - - if (hi2s->State == HAL_I2S_STATE_BUSY_TX) - { - /* Disable the I2S DMA Tx request */ - CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); - } - else if (hi2s->State == HAL_I2S_STATE_BUSY_RX) - { - /* Disable the I2S DMA Rx request */ - CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); - } - else - { - /* nothing to do */ - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2s); - - return HAL_OK; -} - -/** - * @brief Resumes the audio DMA Stream/Channel playing from the Media. - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s) -{ - /* Process Locked */ - __HAL_LOCK(hi2s); - - if (hi2s->State == HAL_I2S_STATE_BUSY_TX) - { - /* Enable the I2S DMA Tx request */ - SET_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); - } - else if (hi2s->State == HAL_I2S_STATE_BUSY_RX) - { - /* Enable the I2S DMA Rx request */ - SET_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); - } - else - { - /* nothing to do */ - } - - /* If the I2S peripheral is still not enabled, enable it */ - if (HAL_IS_BIT_CLR(hi2s->Instance->I2SCFGR, SPI_I2SCFGR_I2SE)) - { - /* Enable I2S peripheral */ - __HAL_I2S_ENABLE(hi2s); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2s); - - return HAL_OK; -} - -/** - * @brief Stops the audio DMA Stream/Channel playing from the Media. - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s) -{ - HAL_StatusTypeDef errorcode = HAL_OK; - /* The Lock is not implemented on this API to allow the user application - to call the HAL SPI API under callbacks HAL_I2S_TxCpltCallback() or HAL_I2S_RxCpltCallback() - when calling HAL_DMA_Abort() API the DMA TX or RX Transfer complete interrupt is generated - and the correspond call back is executed HAL_I2S_TxCpltCallback() or HAL_I2S_RxCpltCallback() - */ - - /* Disable the I2S Tx/Rx DMA requests */ - CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); - CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); - - /* Abort the I2S DMA tx Stream/Channel */ - if (hi2s->hdmatx != NULL) - { - /* Disable the I2S DMA tx Stream/Channel */ - if (HAL_OK != HAL_DMA_Abort(hi2s->hdmatx)) - { - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); - errorcode = HAL_ERROR; - } - } - - /* Abort the I2S DMA rx Stream/Channel */ - if (hi2s->hdmarx != NULL) - { - /* Disable the I2S DMA rx Stream/Channel */ - if (HAL_OK != HAL_DMA_Abort(hi2s->hdmarx)) - { - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); - errorcode = HAL_ERROR; - } - } - - /* Disable I2S peripheral */ - __HAL_I2S_DISABLE(hi2s); - - hi2s->State = HAL_I2S_STATE_READY; - - return errorcode; -} - -/** - * @brief This function handles I2S interrupt request. - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @retval None - */ -void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s) -{ - uint32_t itsource = hi2s->Instance->CR2; - uint32_t itflag = hi2s->Instance->SR; - - /* I2S in mode Receiver ------------------------------------------------*/ - if ((I2S_CHECK_FLAG(itflag, I2S_FLAG_OVR) == RESET) && - (I2S_CHECK_FLAG(itflag, I2S_FLAG_RXNE) != RESET) && (I2S_CHECK_IT_SOURCE(itsource, I2S_IT_RXNE) != RESET)) - { - I2S_Receive_IT(hi2s); - return; - } - - /* I2S in mode Tramitter -----------------------------------------------*/ - if ((I2S_CHECK_FLAG(itflag, I2S_FLAG_TXE) != RESET) && (I2S_CHECK_IT_SOURCE(itsource, I2S_IT_TXE) != RESET)) - { - I2S_Transmit_IT(hi2s); - return; - } - - /* I2S interrupt error -------------------------------------------------*/ - if (I2S_CHECK_IT_SOURCE(itsource, I2S_IT_ERR) != RESET) - { - /* I2S Overrun error interrupt occurred ---------------------------------*/ - if (I2S_CHECK_FLAG(itflag, I2S_FLAG_OVR) != RESET) - { - /* Disable RXNE and ERR interrupt */ - __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); - - /* Set the error code and execute error callback*/ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_OVR); - } - - /* I2S Underrun error interrupt occurred --------------------------------*/ - if (I2S_CHECK_FLAG(itflag, I2S_FLAG_UDR) != RESET) - { - /* Disable TXE and ERR interrupt */ - __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); - - /* Set the error code and execute error callback*/ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_UDR); - } - - /* Set the I2S State ready */ - hi2s->State = HAL_I2S_STATE_READY; - - /* Call user error callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->ErrorCallback(hi2s); -#else - HAL_I2S_ErrorCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ - } -} - -/** - * @brief Tx Transfer Half completed callbacks - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @retval None - */ -__weak void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2s); - - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_I2S_TxHalfCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Tx Transfer completed callbacks - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @retval None - */ -__weak void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2s); - - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_I2S_TxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Rx Transfer half completed callbacks - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @retval None - */ -__weak void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2s); - - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_I2S_RxHalfCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Rx Transfer completed callbacks - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @retval None - */ -__weak void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2s); - - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_I2S_RxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief I2S error callbacks - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @retval None - */ -__weak void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2s); - - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_I2S_ErrorCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup I2S_Exported_Functions_Group3 Peripheral State and Errors functions - * @brief Peripheral State functions - * -@verbatim - =============================================================================== - ##### Peripheral State and Errors functions ##### - =============================================================================== - [..] - This subsection permits to get in run-time the status of the peripheral - and the data flow. - -@endverbatim - * @{ - */ - -/** - * @brief Return the I2S state - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @retval HAL state - */ -HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s) -{ - return hi2s->State; -} - -/** - * @brief Return the I2S error code - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @retval I2S Error Code - */ -uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s) -{ - return hi2s->ErrorCode; -} -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup I2S_Private_Functions I2S Private Functions - * @{ - */ -/** - * @brief DMA I2S transmit process complete callback - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void I2S_DMATxCplt(DMA_HandleTypeDef *hdma) -{ - I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-11.5 */ - - /* if DMA is configured in DMA_NORMAL Mode */ - if (hdma->Init.Mode == DMA_NORMAL) - { - /* Disable Tx DMA Request */ - CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); - - hi2s->TxXferCount = 0U; - hi2s->State = HAL_I2S_STATE_READY; - } - /* Call user Tx complete callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->TxCpltCallback(hi2s); -#else - HAL_I2S_TxCpltCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA I2S transmit process half complete callback - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void I2S_DMATxHalfCplt(DMA_HandleTypeDef *hdma) -{ - I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-11.5 */ - - /* Call user Tx half complete callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->TxHalfCpltCallback(hi2s); -#else - HAL_I2S_TxHalfCpltCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA I2S receive process complete callback - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void I2S_DMARxCplt(DMA_HandleTypeDef *hdma) -{ - I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-11.5 */ - - /* if DMA is configured in DMA_NORMAL Mode */ - if (hdma->Init.Mode == DMA_NORMAL) - { - /* Disable Rx DMA Request */ - CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); - hi2s->RxXferCount = 0U; - hi2s->State = HAL_I2S_STATE_READY; - } - /* Call user Rx complete callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->RxCpltCallback(hi2s); -#else - HAL_I2S_RxCpltCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA I2S receive process half complete callback - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void I2S_DMARxHalfCplt(DMA_HandleTypeDef *hdma) -{ - I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-11.5 */ - - /* Call user Rx half complete callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->RxHalfCpltCallback(hi2s); -#else - HAL_I2S_RxHalfCpltCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA I2S communication error callback - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void I2S_DMAError(DMA_HandleTypeDef *hdma) -{ - I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-11.5 */ - - /* Disable Rx and Tx DMA Request */ - CLEAR_BIT(hi2s->Instance->CR2, (SPI_CR2_RXDMAEN | SPI_CR2_TXDMAEN)); - hi2s->TxXferCount = 0U; - hi2s->RxXferCount = 0U; - - hi2s->State = HAL_I2S_STATE_READY; - - /* Set the error code and execute error callback*/ - SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); - /* Call user error callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->ErrorCallback(hi2s); -#else - HAL_I2S_ErrorCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ -} - -/** - * @brief Transmit an amount of data in non-blocking mode with Interrupt - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @retval None - */ -static void I2S_Transmit_IT(I2S_HandleTypeDef *hi2s) -{ - /* Transmit data */ - hi2s->Instance->DR = (*hi2s->pTxBuffPtr); - hi2s->pTxBuffPtr++; - hi2s->TxXferCount--; - - if (hi2s->TxXferCount == 0U) - { - /* Disable TXE and ERR interrupt */ - __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); - - hi2s->State = HAL_I2S_STATE_READY; - /* Call user Tx complete callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->TxCpltCallback(hi2s); -#else - HAL_I2S_TxCpltCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ - } -} - -/** - * @brief Receive an amount of data in non-blocking mode with Interrupt - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @retval None - */ -static void I2S_Receive_IT(I2S_HandleTypeDef *hi2s) -{ - /* Receive data */ - (*hi2s->pRxBuffPtr) = (uint16_t)hi2s->Instance->DR; - hi2s->pRxBuffPtr++; - hi2s->RxXferCount--; - - if (hi2s->RxXferCount == 0U) - { - /* Disable RXNE and ERR interrupt */ - __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); - - hi2s->State = HAL_I2S_STATE_READY; - /* Call user Rx complete callback */ -#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) - hi2s->RxCpltCallback(hi2s); -#else - HAL_I2S_RxCpltCallback(hi2s); -#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ - } -} - -/** - * @brief This function handles I2S Communication Timeout. - * @param hi2s pointer to a I2S_HandleTypeDef structure that contains - * the configuration information for I2S module - * @param Flag Flag checked - * @param State Value of the flag expected - * @param Timeout Duration of the timeout - * @retval HAL status - */ -static HAL_StatusTypeDef I2S_WaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, uint32_t Flag, FlagStatus State, - uint32_t Timeout) -{ - uint32_t tickstart; - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait until flag is set to status*/ - while (((__HAL_I2S_GET_FLAG(hi2s, Flag)) ? SET : RESET) != State) - { - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - tickstart) >= Timeout) || (Timeout == 0U)) - { - /* Set the I2S State ready */ - hi2s->State = HAL_I2S_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2s); - - return HAL_TIMEOUT; - } - } - } - return HAL_OK; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -#endif /* SPI_I2S_SUPPORT */ - -#endif /* HAL_I2S_MODULE_ENABLED */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit