From 6ab94e0b318884bbcb95e2ea3835f951502e1d99 Mon Sep 17 00:00:00 2001 From: jaseg Date: Wed, 14 Oct 2020 12:47:28 +0200 Subject: Move firmware into subdirectory --- .../STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_rcc.h | 2261 -------------------- 1 file changed, 2261 deletions(-) delete mode 100644 hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_rcc.h (limited to 'hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_rcc.h') diff --git a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_rcc.h b/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_rcc.h deleted file mode 100644 index 626b273..0000000 --- a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_rcc.h +++ /dev/null @@ -1,2261 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f0xx_ll_rcc.h - * @author MCD Application Team - * @brief Header file of RCC LL module. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F0xx_LL_RCC_H -#define __STM32F0xx_LL_RCC_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f0xx.h" - -/** @addtogroup STM32F0xx_LL_Driver - * @{ - */ - -#if defined(RCC) - -/** @defgroup RCC_LL RCC - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup RCC_LL_Private_Constants RCC Private Constants - * @{ - */ -/* Defines used for the bit position in the register and perform offsets*/ -#define RCC_POSITION_HPRE (uint32_t)4U /*!< field position in register RCC_CFGR */ -#define RCC_POSITION_PPRE1 (uint32_t)8U /*!< field position in register RCC_CFGR */ -#define RCC_POSITION_PLLMUL (uint32_t)18U /*!< field position in register RCC_CFGR */ -#define RCC_POSITION_HSICAL (uint32_t)8U /*!< field position in register RCC_CR */ -#define RCC_POSITION_HSITRIM (uint32_t)3U /*!< field position in register RCC_CR */ -#define RCC_POSITION_HSI14TRIM (uint32_t)3U /*!< field position in register RCC_CR2 */ -#define RCC_POSITION_HSI14CAL (uint32_t)8U /*!< field position in register RCC_CR2 */ -#if defined(RCC_HSI48_SUPPORT) -#define RCC_POSITION_HSI48CAL (uint32_t)24U /*!< field position in register RCC_CR2 */ -#endif /* RCC_HSI48_SUPPORT */ -#define RCC_POSITION_USART1SW (uint32_t)0U /*!< field position in register RCC_CFGR3 */ -#define RCC_POSITION_USART2SW (uint32_t)16U /*!< field position in register RCC_CFGR3 */ -#define RCC_POSITION_USART3SW (uint32_t)18U /*!< field position in register RCC_CFGR3 */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup RCC_LL_Private_Macros RCC Private Macros - * @{ - */ -/** - * @} - */ -#endif /*USE_FULL_LL_DRIVER*/ -/* Exported types ------------------------------------------------------------*/ -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup RCC_LL_Exported_Types RCC Exported Types - * @{ - */ - -/** @defgroup LL_ES_CLOCK_FREQ Clocks Frequency Structure - * @{ - */ - -/** - * @brief RCC Clocks Frequency Structure - */ -typedef struct -{ - uint32_t SYSCLK_Frequency; /*!< SYSCLK clock frequency */ - uint32_t HCLK_Frequency; /*!< HCLK clock frequency */ - uint32_t PCLK1_Frequency; /*!< PCLK1 clock frequency */ -} LL_RCC_ClocksTypeDef; - -/** - * @} - */ - -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup RCC_LL_Exported_Constants RCC Exported Constants - * @{ - */ - -/** @defgroup RCC_LL_EC_OSC_VALUES Oscillator Values adaptation - * @brief Defines used to adapt values of different oscillators - * @note These values could be modified in the user environment according to - * HW set-up. - * @{ - */ -#if !defined (HSE_VALUE) -#define HSE_VALUE 8000000U /*!< Value of the HSE oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSI_VALUE) -#define HSI_VALUE 8000000U /*!< Value of the HSI oscillator in Hz */ -#endif /* HSI_VALUE */ - -#if !defined (LSE_VALUE) -#define LSE_VALUE 32768U /*!< Value of the LSE oscillator in Hz */ -#endif /* LSE_VALUE */ - -#if !defined (LSI_VALUE) -#define LSI_VALUE 32000U /*!< Value of the LSI oscillator in Hz */ -#endif /* LSI_VALUE */ -#if defined(RCC_HSI48_SUPPORT) - -#if !defined (HSI48_VALUE) -#define HSI48_VALUE 48000000U /*!< Value of the HSI48 oscillator in Hz */ -#endif /* HSI48_VALUE */ -#endif /* RCC_HSI48_SUPPORT */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_CLEAR_FLAG Clear Flags Defines - * @brief Flags defines which can be used with LL_RCC_WriteReg function - * @{ - */ -#define LL_RCC_CIR_LSIRDYC RCC_CIR_LSIRDYC /*!< LSI Ready Interrupt Clear */ -#define LL_RCC_CIR_LSERDYC RCC_CIR_LSERDYC /*!< LSE Ready Interrupt Clear */ -#define LL_RCC_CIR_HSIRDYC RCC_CIR_HSIRDYC /*!< HSI Ready Interrupt Clear */ -#define LL_RCC_CIR_HSERDYC RCC_CIR_HSERDYC /*!< HSE Ready Interrupt Clear */ -#define LL_RCC_CIR_PLLRDYC RCC_CIR_PLLRDYC /*!< PLL Ready Interrupt Clear */ -#define LL_RCC_CIR_HSI14RDYC RCC_CIR_HSI14RDYC /*!< HSI14 Ready Interrupt Clear */ -#if defined(RCC_HSI48_SUPPORT) -#define LL_RCC_CIR_HSI48RDYC RCC_CIR_HSI48RDYC /*!< HSI48 Ready Interrupt Clear */ -#endif /* RCC_HSI48_SUPPORT */ -#define LL_RCC_CIR_CSSC RCC_CIR_CSSC /*!< Clock Security System Interrupt Clear */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_GET_FLAG Get Flags Defines - * @brief Flags defines which can be used with LL_RCC_ReadReg function - * @{ - */ -#define LL_RCC_CIR_LSIRDYF RCC_CIR_LSIRDYF /*!< LSI Ready Interrupt flag */ -#define LL_RCC_CIR_LSERDYF RCC_CIR_LSERDYF /*!< LSE Ready Interrupt flag */ -#define LL_RCC_CIR_HSIRDYF RCC_CIR_HSIRDYF /*!< HSI Ready Interrupt flag */ -#define LL_RCC_CIR_HSERDYF RCC_CIR_HSERDYF /*!< HSE Ready Interrupt flag */ -#define LL_RCC_CIR_PLLRDYF RCC_CIR_PLLRDYF /*!< PLL Ready Interrupt flag */ -#define LL_RCC_CIR_HSI14RDYF RCC_CIR_HSI14RDYF /*!< HSI14 Ready Interrupt flag */ -#if defined(RCC_HSI48_SUPPORT) -#define LL_RCC_CIR_HSI48RDYF RCC_CIR_HSI48RDYF /*!< HSI48 Ready Interrupt flag */ -#endif /* RCC_HSI48_SUPPORT */ -#define LL_RCC_CIR_CSSF RCC_CIR_CSSF /*!< Clock Security System Interrupt flag */ -#define LL_RCC_CSR_OBLRSTF RCC_CSR_OBLRSTF /*!< OBL reset flag */ -#define LL_RCC_CSR_PINRSTF RCC_CSR_PINRSTF /*!< PIN reset flag */ -#define LL_RCC_CSR_PORRSTF RCC_CSR_PORRSTF /*!< POR/PDR reset flag */ -#define LL_RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF /*!< Software Reset flag */ -#define LL_RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF /*!< Independent Watchdog reset flag */ -#define LL_RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF /*!< Window watchdog reset flag */ -#define LL_RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF /*!< Low-Power reset flag */ -#if defined(RCC_CSR_V18PWRRSTF) -#define LL_RCC_CSR_V18PWRRSTF RCC_CSR_V18PWRRSTF /*!< Reset flag of the 1.8 V domain. */ -#endif /* RCC_CSR_V18PWRRSTF */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_IT IT Defines - * @brief IT defines which can be used with LL_RCC_ReadReg and LL_RCC_WriteReg functions - * @{ - */ -#define LL_RCC_CIR_LSIRDYIE RCC_CIR_LSIRDYIE /*!< LSI Ready Interrupt Enable */ -#define LL_RCC_CIR_LSERDYIE RCC_CIR_LSERDYIE /*!< LSE Ready Interrupt Enable */ -#define LL_RCC_CIR_HSIRDYIE RCC_CIR_HSIRDYIE /*!< HSI Ready Interrupt Enable */ -#define LL_RCC_CIR_HSERDYIE RCC_CIR_HSERDYIE /*!< HSE Ready Interrupt Enable */ -#define LL_RCC_CIR_PLLRDYIE RCC_CIR_PLLRDYIE /*!< PLL Ready Interrupt Enable */ -#define LL_RCC_CIR_HSI14RDYIE RCC_CIR_HSI14RDYIE /*!< HSI14 Ready Interrupt Enable */ -#if defined(RCC_HSI48_SUPPORT) -#define LL_RCC_CIR_HSI48RDYIE RCC_CIR_HSI48RDYIE /*!< HSI48 Ready Interrupt Enable */ -#endif /* RCC_HSI48_SUPPORT */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_LSEDRIVE LSE oscillator drive capability - * @{ - */ -#define LL_RCC_LSEDRIVE_LOW ((uint32_t)0x00000000U) /*!< Xtal mode lower driving capability */ -#define LL_RCC_LSEDRIVE_MEDIUMLOW RCC_BDCR_LSEDRV_1 /*!< Xtal mode medium low driving capability */ -#define LL_RCC_LSEDRIVE_MEDIUMHIGH RCC_BDCR_LSEDRV_0 /*!< Xtal mode medium high driving capability */ -#define LL_RCC_LSEDRIVE_HIGH RCC_BDCR_LSEDRV /*!< Xtal mode higher driving capability */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_SYS_CLKSOURCE System clock switch - * @{ - */ -#define LL_RCC_SYS_CLKSOURCE_HSI RCC_CFGR_SW_HSI /*!< HSI selection as system clock */ -#define LL_RCC_SYS_CLKSOURCE_HSE RCC_CFGR_SW_HSE /*!< HSE selection as system clock */ -#define LL_RCC_SYS_CLKSOURCE_PLL RCC_CFGR_SW_PLL /*!< PLL selection as system clock */ -#if defined(RCC_CFGR_SW_HSI48) -#define LL_RCC_SYS_CLKSOURCE_HSI48 RCC_CFGR_SW_HSI48 /*!< HSI48 selection as system clock */ -#endif /* RCC_CFGR_SW_HSI48 */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_SYS_CLKSOURCE_STATUS System clock switch status - * @{ - */ -#define LL_RCC_SYS_CLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */ -#define LL_RCC_SYS_CLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */ -#define LL_RCC_SYS_CLKSOURCE_STATUS_PLL RCC_CFGR_SWS_PLL /*!< PLL used as system clock */ -#if defined(RCC_CFGR_SWS_HSI48) -#define LL_RCC_SYS_CLKSOURCE_STATUS_HSI48 RCC_CFGR_SWS_HSI48 /*!< HSI48 used as system clock */ -#endif /* RCC_CFGR_SWS_HSI48 */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_SYSCLK_DIV AHB prescaler - * @{ - */ -#define LL_RCC_SYSCLK_DIV_1 RCC_CFGR_HPRE_DIV1 /*!< SYSCLK not divided */ -#define LL_RCC_SYSCLK_DIV_2 RCC_CFGR_HPRE_DIV2 /*!< SYSCLK divided by 2 */ -#define LL_RCC_SYSCLK_DIV_4 RCC_CFGR_HPRE_DIV4 /*!< SYSCLK divided by 4 */ -#define LL_RCC_SYSCLK_DIV_8 RCC_CFGR_HPRE_DIV8 /*!< SYSCLK divided by 8 */ -#define LL_RCC_SYSCLK_DIV_16 RCC_CFGR_HPRE_DIV16 /*!< SYSCLK divided by 16 */ -#define LL_RCC_SYSCLK_DIV_64 RCC_CFGR_HPRE_DIV64 /*!< SYSCLK divided by 64 */ -#define LL_RCC_SYSCLK_DIV_128 RCC_CFGR_HPRE_DIV128 /*!< SYSCLK divided by 128 */ -#define LL_RCC_SYSCLK_DIV_256 RCC_CFGR_HPRE_DIV256 /*!< SYSCLK divided by 256 */ -#define LL_RCC_SYSCLK_DIV_512 RCC_CFGR_HPRE_DIV512 /*!< SYSCLK divided by 512 */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_APB1_DIV APB low-speed prescaler (APB1) - * @{ - */ -#define LL_RCC_APB1_DIV_1 RCC_CFGR_PPRE_DIV1 /*!< HCLK not divided */ -#define LL_RCC_APB1_DIV_2 RCC_CFGR_PPRE_DIV2 /*!< HCLK divided by 2 */ -#define LL_RCC_APB1_DIV_4 RCC_CFGR_PPRE_DIV4 /*!< HCLK divided by 4 */ -#define LL_RCC_APB1_DIV_8 RCC_CFGR_PPRE_DIV8 /*!< HCLK divided by 8 */ -#define LL_RCC_APB1_DIV_16 RCC_CFGR_PPRE_DIV16 /*!< HCLK divided by 16 */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_MCO1SOURCE MCO1 SOURCE selection - * @{ - */ -#define LL_RCC_MCO1SOURCE_NOCLOCK RCC_CFGR_MCOSEL_NOCLOCK /*!< MCO output disabled, no clock on MCO */ -#define LL_RCC_MCO1SOURCE_HSI14 RCC_CFGR_MCOSEL_HSI14 /*!< HSI14 oscillator clock selected */ -#define LL_RCC_MCO1SOURCE_SYSCLK RCC_CFGR_MCOSEL_SYSCLK /*!< SYSCLK selection as MCO source */ -#define LL_RCC_MCO1SOURCE_HSI RCC_CFGR_MCOSEL_HSI /*!< HSI selection as MCO source */ -#define LL_RCC_MCO1SOURCE_HSE RCC_CFGR_MCOSEL_HSE /*!< HSE selection as MCO source */ -#define LL_RCC_MCO1SOURCE_LSI RCC_CFGR_MCOSEL_LSI /*!< LSI selection as MCO source */ -#define LL_RCC_MCO1SOURCE_LSE RCC_CFGR_MCOSEL_LSE /*!< LSE selection as MCO source */ -#if defined(RCC_CFGR_MCOSEL_HSI48) -#define LL_RCC_MCO1SOURCE_HSI48 RCC_CFGR_MCOSEL_HSI48 /*!< HSI48 selection as MCO source */ -#endif /* RCC_CFGR_MCOSEL_HSI48 */ -#define LL_RCC_MCO1SOURCE_PLLCLK_DIV_2 RCC_CFGR_MCOSEL_PLL_DIV2 /*!< PLL clock divided by 2*/ -#if defined(RCC_CFGR_PLLNODIV) -#define LL_RCC_MCO1SOURCE_PLLCLK (RCC_CFGR_MCOSEL_PLL_DIV2 | RCC_CFGR_PLLNODIV) /*!< PLL clock selected*/ -#endif /* RCC_CFGR_PLLNODIV */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_MCO1_DIV MCO1 prescaler - * @{ - */ -#define LL_RCC_MCO1_DIV_1 ((uint32_t)0x00000000U)/*!< MCO Clock divided by 1 */ -#if defined(RCC_CFGR_MCOPRE) -#define LL_RCC_MCO1_DIV_2 RCC_CFGR_MCOPRE_DIV2 /*!< MCO Clock divided by 2 */ -#define LL_RCC_MCO1_DIV_4 RCC_CFGR_MCOPRE_DIV4 /*!< MCO Clock divided by 4 */ -#define LL_RCC_MCO1_DIV_8 RCC_CFGR_MCOPRE_DIV8 /*!< MCO Clock divided by 8 */ -#define LL_RCC_MCO1_DIV_16 RCC_CFGR_MCOPRE_DIV16 /*!< MCO Clock divided by 16 */ -#define LL_RCC_MCO1_DIV_32 RCC_CFGR_MCOPRE_DIV32 /*!< MCO Clock divided by 32 */ -#define LL_RCC_MCO1_DIV_64 RCC_CFGR_MCOPRE_DIV64 /*!< MCO Clock divided by 64 */ -#define LL_RCC_MCO1_DIV_128 RCC_CFGR_MCOPRE_DIV128 /*!< MCO Clock divided by 128 */ -#endif /* RCC_CFGR_MCOPRE */ -/** - * @} - */ - -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup RCC_LL_EC_PERIPH_FREQUENCY Peripheral clock frequency - * @{ - */ -#define LL_RCC_PERIPH_FREQUENCY_NO 0x00000000U /*!< No clock enabled for the peripheral */ -#define LL_RCC_PERIPH_FREQUENCY_NA 0xFFFFFFFFU /*!< Frequency cannot be provided as external clock */ -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/** @defgroup RCC_LL_EC_USART1_CLKSOURCE Peripheral USART clock source selection - * @{ - */ -#define LL_RCC_USART1_CLKSOURCE_PCLK1 (uint32_t)((RCC_POSITION_USART1SW << 24) | RCC_CFGR3_USART1SW_PCLK) /*!< PCLK1 clock used as USART1 clock source */ -#define LL_RCC_USART1_CLKSOURCE_SYSCLK (uint32_t)((RCC_POSITION_USART1SW << 24) | RCC_CFGR3_USART1SW_SYSCLK) /*!< System clock selected as USART1 clock source */ -#define LL_RCC_USART1_CLKSOURCE_LSE (uint32_t)((RCC_POSITION_USART1SW << 24) | RCC_CFGR3_USART1SW_LSE) /*!< LSE oscillator clock used as USART1 clock source */ -#define LL_RCC_USART1_CLKSOURCE_HSI (uint32_t)((RCC_POSITION_USART1SW << 24) | RCC_CFGR3_USART1SW_HSI) /*!< HSI oscillator clock used as USART1 clock source */ -#if defined(RCC_CFGR3_USART2SW) -#define LL_RCC_USART2_CLKSOURCE_PCLK1 (uint32_t)((RCC_POSITION_USART2SW << 24) | RCC_CFGR3_USART2SW_PCLK) /*!< PCLK1 clock used as USART2 clock source */ -#define LL_RCC_USART2_CLKSOURCE_SYSCLK (uint32_t)((RCC_POSITION_USART2SW << 24) | RCC_CFGR3_USART2SW_SYSCLK) /*!< System clock selected as USART2 clock source */ -#define LL_RCC_USART2_CLKSOURCE_LSE (uint32_t)((RCC_POSITION_USART2SW << 24) | RCC_CFGR3_USART2SW_LSE) /*!< LSE oscillator clock used as USART2 clock source */ -#define LL_RCC_USART2_CLKSOURCE_HSI (uint32_t)((RCC_POSITION_USART2SW << 24) | RCC_CFGR3_USART2SW_HSI) /*!< HSI oscillator clock used as USART2 clock source */ -#endif /* RCC_CFGR3_USART2SW */ -#if defined(RCC_CFGR3_USART3SW) -#define LL_RCC_USART3_CLKSOURCE_PCLK1 (uint32_t)((RCC_POSITION_USART3SW << 24) | RCC_CFGR3_USART3SW_PCLK) /*!< PCLK1 clock used as USART3 clock source */ -#define LL_RCC_USART3_CLKSOURCE_SYSCLK (uint32_t)((RCC_POSITION_USART3SW << 24) | RCC_CFGR3_USART3SW_SYSCLK) /*!< System clock selected as USART3 clock source */ -#define LL_RCC_USART3_CLKSOURCE_LSE (uint32_t)((RCC_POSITION_USART3SW << 24) | RCC_CFGR3_USART3SW_LSE) /*!< LSE oscillator clock used as USART3 clock source */ -#define LL_RCC_USART3_CLKSOURCE_HSI (uint32_t)((RCC_POSITION_USART3SW << 24) | RCC_CFGR3_USART3SW_HSI) /*!< HSI oscillator clock used as USART3 clock source */ -#endif /* RCC_CFGR3_USART3SW */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_I2C1_CLKSOURCE Peripheral I2C clock source selection - * @{ - */ -#define LL_RCC_I2C1_CLKSOURCE_HSI RCC_CFGR3_I2C1SW_HSI /*!< HSI oscillator clock used as I2C1 clock source */ -#define LL_RCC_I2C1_CLKSOURCE_SYSCLK RCC_CFGR3_I2C1SW_SYSCLK /*!< System clock selected as I2C1 clock source */ -/** - * @} - */ - -#if defined(CEC) -/** @defgroup RCC_LL_EC_CEC_CLKSOURCE Peripheral CEC clock source selection - * @{ - */ -#define LL_RCC_CEC_CLKSOURCE_HSI_DIV244 RCC_CFGR3_CECSW_HSI_DIV244 /*!< HSI clock divided by 244 selected as HDMI CEC entry clock source */ -#define LL_RCC_CEC_CLKSOURCE_LSE RCC_CFGR3_CECSW_LSE /*!< LSE clock selected as HDMI CEC entry clock source */ -/** - * @} - */ - -#endif /* CEC */ - -#if defined(USB) -/** @defgroup RCC_LL_EC_USB_CLKSOURCE Peripheral USB clock source selection - * @{ - */ -#if defined(RCC_CFGR3_USBSW_HSI48) -#define LL_RCC_USB_CLKSOURCE_HSI48 RCC_CFGR3_USBSW_HSI48 /*!< HSI48 oscillator clock used as USB clock source */ -#else -#define LL_RCC_USB_CLKSOURCE_NONE ((uint32_t)0x00000000) /*!< USB Clock disabled */ -#endif /*RCC_CFGR3_USBSW_HSI48*/ -#define LL_RCC_USB_CLKSOURCE_PLL RCC_CFGR3_USBSW_PLLCLK /*!< PLL selected as USB clock source */ -/** - * @} - */ - -#endif /* USB */ - -/** @defgroup RCC_LL_EC_USART1 Peripheral USART get clock source - * @{ - */ -#define LL_RCC_USART1_CLKSOURCE RCC_POSITION_USART1SW /*!< USART1 Clock source selection */ -#if defined(RCC_CFGR3_USART2SW) -#define LL_RCC_USART2_CLKSOURCE RCC_POSITION_USART2SW /*!< USART2 Clock source selection */ -#endif /* RCC_CFGR3_USART2SW */ -#if defined(RCC_CFGR3_USART3SW) -#define LL_RCC_USART3_CLKSOURCE RCC_POSITION_USART3SW /*!< USART3 Clock source selection */ -#endif /* RCC_CFGR3_USART3SW */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_I2C1 Peripheral I2C get clock source - * @{ - */ -#define LL_RCC_I2C1_CLKSOURCE RCC_CFGR3_I2C1SW /*!< I2C1 Clock source selection */ -/** - * @} - */ - -#if defined(CEC) -/** @defgroup RCC_LL_EC_CEC Peripheral CEC get clock source - * @{ - */ -#define LL_RCC_CEC_CLKSOURCE RCC_CFGR3_CECSW /*!< CEC Clock source selection */ -/** - * @} - */ -#endif /* CEC */ - -#if defined(USB) -/** @defgroup RCC_LL_EC_USB Peripheral USB get clock source - * @{ - */ -#define LL_RCC_USB_CLKSOURCE RCC_CFGR3_USBSW /*!< USB Clock source selection */ -/** - * @} - */ -#endif /* USB */ - -/** @defgroup RCC_LL_EC_RTC_CLKSOURCE RTC clock source selection - * @{ - */ -#define LL_RCC_RTC_CLKSOURCE_NONE 0x00000000U /*!< No clock used as RTC clock */ -#define LL_RCC_RTC_CLKSOURCE_LSE RCC_BDCR_RTCSEL_0 /*!< LSE oscillator clock used as RTC clock */ -#define LL_RCC_RTC_CLKSOURCE_LSI RCC_BDCR_RTCSEL_1 /*!< LSI oscillator clock used as RTC clock */ -#define LL_RCC_RTC_CLKSOURCE_HSE_DIV32 RCC_BDCR_RTCSEL /*!< HSE oscillator clock divided by 32 used as RTC clock */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_PLL_MUL PLL Multiplicator factor - * @{ - */ -#define LL_RCC_PLL_MUL_2 RCC_CFGR_PLLMUL2 /*!< PLL input clock*2 */ -#define LL_RCC_PLL_MUL_3 RCC_CFGR_PLLMUL3 /*!< PLL input clock*3 */ -#define LL_RCC_PLL_MUL_4 RCC_CFGR_PLLMUL4 /*!< PLL input clock*4 */ -#define LL_RCC_PLL_MUL_5 RCC_CFGR_PLLMUL5 /*!< PLL input clock*5 */ -#define LL_RCC_PLL_MUL_6 RCC_CFGR_PLLMUL6 /*!< PLL input clock*6 */ -#define LL_RCC_PLL_MUL_7 RCC_CFGR_PLLMUL7 /*!< PLL input clock*7 */ -#define LL_RCC_PLL_MUL_8 RCC_CFGR_PLLMUL8 /*!< PLL input clock*8 */ -#define LL_RCC_PLL_MUL_9 RCC_CFGR_PLLMUL9 /*!< PLL input clock*9 */ -#define LL_RCC_PLL_MUL_10 RCC_CFGR_PLLMUL10 /*!< PLL input clock*10 */ -#define LL_RCC_PLL_MUL_11 RCC_CFGR_PLLMUL11 /*!< PLL input clock*11 */ -#define LL_RCC_PLL_MUL_12 RCC_CFGR_PLLMUL12 /*!< PLL input clock*12 */ -#define LL_RCC_PLL_MUL_13 RCC_CFGR_PLLMUL13 /*!< PLL input clock*13 */ -#define LL_RCC_PLL_MUL_14 RCC_CFGR_PLLMUL14 /*!< PLL input clock*14 */ -#define LL_RCC_PLL_MUL_15 RCC_CFGR_PLLMUL15 /*!< PLL input clock*15 */ -#define LL_RCC_PLL_MUL_16 RCC_CFGR_PLLMUL16 /*!< PLL input clock*16 */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_PLLSOURCE PLL SOURCE - * @{ - */ -#define LL_RCC_PLLSOURCE_NONE 0x00000000U /*!< No clock selected as main PLL entry clock source */ -#define LL_RCC_PLLSOURCE_HSE RCC_CFGR_PLLSRC_HSE_PREDIV /*!< HSE/PREDIV clock selected as PLL entry clock source */ -#if defined(RCC_PLLSRC_PREDIV1_SUPPORT) -#define LL_RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI_PREDIV /*!< HSI/PREDIV clock selected as PLL entry clock source */ -#if defined(RCC_CFGR_SW_HSI48) -#define LL_RCC_PLLSOURCE_HSI48 RCC_CFGR_PLLSRC_HSI48_PREDIV /*!< HSI48/PREDIV clock selected as PLL entry clock source */ -#endif /* RCC_CFGR_SW_HSI48 */ -#else -#define LL_RCC_PLLSOURCE_HSI_DIV_2 RCC_CFGR_PLLSRC_HSI_DIV2 /*!< HSI clock divided by 2 selected as PLL entry clock source */ -#define LL_RCC_PLLSOURCE_HSE_DIV_1 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV1) /*!< HSE clock selected as PLL entry clock source */ -#define LL_RCC_PLLSOURCE_HSE_DIV_2 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV2) /*!< HSE/2 clock selected as PLL entry clock source */ -#define LL_RCC_PLLSOURCE_HSE_DIV_3 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV3) /*!< HSE/3 clock selected as PLL entry clock source */ -#define LL_RCC_PLLSOURCE_HSE_DIV_4 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV4) /*!< HSE/4 clock selected as PLL entry clock source */ -#define LL_RCC_PLLSOURCE_HSE_DIV_5 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV5) /*!< HSE/5 clock selected as PLL entry clock source */ -#define LL_RCC_PLLSOURCE_HSE_DIV_6 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV6) /*!< HSE/6 clock selected as PLL entry clock source */ -#define LL_RCC_PLLSOURCE_HSE_DIV_7 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV7) /*!< HSE/7 clock selected as PLL entry clock source */ -#define LL_RCC_PLLSOURCE_HSE_DIV_8 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV8) /*!< HSE/8 clock selected as PLL entry clock source */ -#define LL_RCC_PLLSOURCE_HSE_DIV_9 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV9) /*!< HSE/9 clock selected as PLL entry clock source */ -#define LL_RCC_PLLSOURCE_HSE_DIV_10 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV10) /*!< HSE/10 clock selected as PLL entry clock source */ -#define LL_RCC_PLLSOURCE_HSE_DIV_11 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV11) /*!< HSE/11 clock selected as PLL entry clock source */ -#define LL_RCC_PLLSOURCE_HSE_DIV_12 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV12) /*!< HSE/12 clock selected as PLL entry clock source */ -#define LL_RCC_PLLSOURCE_HSE_DIV_13 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV13) /*!< HSE/13 clock selected as PLL entry clock source */ -#define LL_RCC_PLLSOURCE_HSE_DIV_14 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV14) /*!< HSE/14 clock selected as PLL entry clock source */ -#define LL_RCC_PLLSOURCE_HSE_DIV_15 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV15) /*!< HSE/15 clock selected as PLL entry clock source */ -#define LL_RCC_PLLSOURCE_HSE_DIV_16 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV16) /*!< HSE/16 clock selected as PLL entry clock source */ -#endif /* RCC_PLLSRC_PREDIV1_SUPPORT */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_PREDIV_DIV PREDIV Division factor - * @{ - */ -#define LL_RCC_PREDIV_DIV_1 RCC_CFGR2_PREDIV_DIV1 /*!< PREDIV input clock not divided */ -#define LL_RCC_PREDIV_DIV_2 RCC_CFGR2_PREDIV_DIV2 /*!< PREDIV input clock divided by 2 */ -#define LL_RCC_PREDIV_DIV_3 RCC_CFGR2_PREDIV_DIV3 /*!< PREDIV input clock divided by 3 */ -#define LL_RCC_PREDIV_DIV_4 RCC_CFGR2_PREDIV_DIV4 /*!< PREDIV input clock divided by 4 */ -#define LL_RCC_PREDIV_DIV_5 RCC_CFGR2_PREDIV_DIV5 /*!< PREDIV input clock divided by 5 */ -#define LL_RCC_PREDIV_DIV_6 RCC_CFGR2_PREDIV_DIV6 /*!< PREDIV input clock divided by 6 */ -#define LL_RCC_PREDIV_DIV_7 RCC_CFGR2_PREDIV_DIV7 /*!< PREDIV input clock divided by 7 */ -#define LL_RCC_PREDIV_DIV_8 RCC_CFGR2_PREDIV_DIV8 /*!< PREDIV input clock divided by 8 */ -#define LL_RCC_PREDIV_DIV_9 RCC_CFGR2_PREDIV_DIV9 /*!< PREDIV input clock divided by 9 */ -#define LL_RCC_PREDIV_DIV_10 RCC_CFGR2_PREDIV_DIV10 /*!< PREDIV input clock divided by 10 */ -#define LL_RCC_PREDIV_DIV_11 RCC_CFGR2_PREDIV_DIV11 /*!< PREDIV input clock divided by 11 */ -#define LL_RCC_PREDIV_DIV_12 RCC_CFGR2_PREDIV_DIV12 /*!< PREDIV input clock divided by 12 */ -#define LL_RCC_PREDIV_DIV_13 RCC_CFGR2_PREDIV_DIV13 /*!< PREDIV input clock divided by 13 */ -#define LL_RCC_PREDIV_DIV_14 RCC_CFGR2_PREDIV_DIV14 /*!< PREDIV input clock divided by 14 */ -#define LL_RCC_PREDIV_DIV_15 RCC_CFGR2_PREDIV_DIV15 /*!< PREDIV input clock divided by 15 */ -#define LL_RCC_PREDIV_DIV_16 RCC_CFGR2_PREDIV_DIV16 /*!< PREDIV input clock divided by 16 */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup RCC_LL_Exported_Macros RCC Exported Macros - * @{ - */ - -/** @defgroup RCC_LL_EM_WRITE_READ Common Write and read registers Macros - * @{ - */ - -/** - * @brief Write a value in RCC register - * @param __REG__ Register to be written - * @param __VALUE__ Value to be written in the register - * @retval None - */ -#define LL_RCC_WriteReg(__REG__, __VALUE__) WRITE_REG(RCC->__REG__, (__VALUE__)) - -/** - * @brief Read a value in RCC register - * @param __REG__ Register to be read - * @retval Register value - */ -#define LL_RCC_ReadReg(__REG__) READ_REG(RCC->__REG__) -/** - * @} - */ - -/** @defgroup RCC_LL_EM_CALC_FREQ Calculate frequencies - * @{ - */ - -#if defined(RCC_PLLSRC_PREDIV1_SUPPORT) -/** - * @brief Helper macro to calculate the PLLCLK frequency - * @note ex: @ref __LL_RCC_CALC_PLLCLK_FREQ (HSE_VALUE, @ref LL_RCC_PLL_GetMultiplicator() - * , @ref LL_RCC_PLL_GetPrediv()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI/HSI48) - * @param __PLLMUL__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLL_MUL_2 - * @arg @ref LL_RCC_PLL_MUL_3 - * @arg @ref LL_RCC_PLL_MUL_4 - * @arg @ref LL_RCC_PLL_MUL_5 - * @arg @ref LL_RCC_PLL_MUL_6 - * @arg @ref LL_RCC_PLL_MUL_7 - * @arg @ref LL_RCC_PLL_MUL_8 - * @arg @ref LL_RCC_PLL_MUL_9 - * @arg @ref LL_RCC_PLL_MUL_10 - * @arg @ref LL_RCC_PLL_MUL_11 - * @arg @ref LL_RCC_PLL_MUL_12 - * @arg @ref LL_RCC_PLL_MUL_13 - * @arg @ref LL_RCC_PLL_MUL_14 - * @arg @ref LL_RCC_PLL_MUL_15 - * @arg @ref LL_RCC_PLL_MUL_16 - * @param __PLLPREDIV__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PREDIV_DIV_1 - * @arg @ref LL_RCC_PREDIV_DIV_2 - * @arg @ref LL_RCC_PREDIV_DIV_3 - * @arg @ref LL_RCC_PREDIV_DIV_4 - * @arg @ref LL_RCC_PREDIV_DIV_5 - * @arg @ref LL_RCC_PREDIV_DIV_6 - * @arg @ref LL_RCC_PREDIV_DIV_7 - * @arg @ref LL_RCC_PREDIV_DIV_8 - * @arg @ref LL_RCC_PREDIV_DIV_9 - * @arg @ref LL_RCC_PREDIV_DIV_10 - * @arg @ref LL_RCC_PREDIV_DIV_11 - * @arg @ref LL_RCC_PREDIV_DIV_12 - * @arg @ref LL_RCC_PREDIV_DIV_13 - * @arg @ref LL_RCC_PREDIV_DIV_14 - * @arg @ref LL_RCC_PREDIV_DIV_15 - * @arg @ref LL_RCC_PREDIV_DIV_16 - * @retval PLL clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLCLK_FREQ(__INPUTFREQ__, __PLLMUL__, __PLLPREDIV__) \ - (((__INPUTFREQ__) / ((((__PLLPREDIV__) & RCC_CFGR2_PREDIV) + 1U))) * ((((__PLLMUL__) & RCC_CFGR_PLLMUL) >> RCC_POSITION_PLLMUL) + 2U)) - -#else -/** - * @brief Helper macro to calculate the PLLCLK frequency - * @note ex: @ref __LL_RCC_CALC_PLLCLK_FREQ (HSE_VALUE / (@ref LL_RCC_PLL_GetPrediv () + 1), @ref LL_RCC_PLL_GetMultiplicator()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE div Prediv / HSI div 2) - * @param __PLLMUL__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLL_MUL_2 - * @arg @ref LL_RCC_PLL_MUL_3 - * @arg @ref LL_RCC_PLL_MUL_4 - * @arg @ref LL_RCC_PLL_MUL_5 - * @arg @ref LL_RCC_PLL_MUL_6 - * @arg @ref LL_RCC_PLL_MUL_7 - * @arg @ref LL_RCC_PLL_MUL_8 - * @arg @ref LL_RCC_PLL_MUL_9 - * @arg @ref LL_RCC_PLL_MUL_10 - * @arg @ref LL_RCC_PLL_MUL_11 - * @arg @ref LL_RCC_PLL_MUL_12 - * @arg @ref LL_RCC_PLL_MUL_13 - * @arg @ref LL_RCC_PLL_MUL_14 - * @arg @ref LL_RCC_PLL_MUL_15 - * @arg @ref LL_RCC_PLL_MUL_16 - * @retval PLL clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLCLK_FREQ(__INPUTFREQ__, __PLLMUL__) \ - ((__INPUTFREQ__) * ((((__PLLMUL__) & RCC_CFGR_PLLMUL) >> RCC_POSITION_PLLMUL) + 2U)) -#endif /* RCC_PLLSRC_PREDIV1_SUPPORT */ -/** - * @brief Helper macro to calculate the HCLK frequency - * @note: __AHBPRESCALER__ be retrieved by @ref LL_RCC_GetAHBPrescaler - * ex: __LL_RCC_CALC_HCLK_FREQ(LL_RCC_GetAHBPrescaler()) - * @param __SYSCLKFREQ__ SYSCLK frequency (based on HSE/HSI/PLLCLK) - * @param __AHBPRESCALER__ This parameter can be one of the following values: - * @arg @ref LL_RCC_SYSCLK_DIV_1 - * @arg @ref LL_RCC_SYSCLK_DIV_2 - * @arg @ref LL_RCC_SYSCLK_DIV_4 - * @arg @ref LL_RCC_SYSCLK_DIV_8 - * @arg @ref LL_RCC_SYSCLK_DIV_16 - * @arg @ref LL_RCC_SYSCLK_DIV_64 - * @arg @ref LL_RCC_SYSCLK_DIV_128 - * @arg @ref LL_RCC_SYSCLK_DIV_256 - * @arg @ref LL_RCC_SYSCLK_DIV_512 - * @retval HCLK clock frequency (in Hz) - */ -#define __LL_RCC_CALC_HCLK_FREQ(__SYSCLKFREQ__, __AHBPRESCALER__) ((__SYSCLKFREQ__) >> AHBPrescTable[((__AHBPRESCALER__) & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos]) - -/** - * @brief Helper macro to calculate the PCLK1 frequency (ABP1) - * @note: __APB1PRESCALER__ be retrieved by @ref LL_RCC_GetAPB1Prescaler - * ex: __LL_RCC_CALC_PCLK1_FREQ(LL_RCC_GetAPB1Prescaler()) - * @param __HCLKFREQ__ HCLK frequency - * @param __APB1PRESCALER__ This parameter can be one of the following values: - * @arg @ref LL_RCC_APB1_DIV_1 - * @arg @ref LL_RCC_APB1_DIV_2 - * @arg @ref LL_RCC_APB1_DIV_4 - * @arg @ref LL_RCC_APB1_DIV_8 - * @arg @ref LL_RCC_APB1_DIV_16 - * @retval PCLK1 clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PCLK1_FREQ(__HCLKFREQ__, __APB1PRESCALER__) ((__HCLKFREQ__) >> APBPrescTable[(__APB1PRESCALER__) >> RCC_CFGR_PPRE_Pos]) - -/** - * @} - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup RCC_LL_Exported_Functions RCC Exported Functions - * @{ - */ - -/** @defgroup RCC_LL_EF_HSE HSE - * @{ - */ - -/** - * @brief Enable the Clock Security System. - * @rmtoll CR CSSON LL_RCC_HSE_EnableCSS - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSE_EnableCSS(void) -{ - SET_BIT(RCC->CR, RCC_CR_CSSON); -} - -/** - * @brief Disable the Clock Security System. - * @note Cannot be disabled in HSE is ready (only by hardware) - * @rmtoll CR CSSON LL_RCC_HSE_DisableCSS - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSE_DisableCSS(void) -{ - CLEAR_BIT(RCC->CR, RCC_CR_CSSON); -} - -/** - * @brief Enable HSE external oscillator (HSE Bypass) - * @rmtoll CR HSEBYP LL_RCC_HSE_EnableBypass - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSE_EnableBypass(void) -{ - SET_BIT(RCC->CR, RCC_CR_HSEBYP); -} - -/** - * @brief Disable HSE external oscillator (HSE Bypass) - * @rmtoll CR HSEBYP LL_RCC_HSE_DisableBypass - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSE_DisableBypass(void) -{ - CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); -} - -/** - * @brief Enable HSE crystal oscillator (HSE ON) - * @rmtoll CR HSEON LL_RCC_HSE_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSE_Enable(void) -{ - SET_BIT(RCC->CR, RCC_CR_HSEON); -} - -/** - * @brief Disable HSE crystal oscillator (HSE ON) - * @rmtoll CR HSEON LL_RCC_HSE_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSE_Disable(void) -{ - CLEAR_BIT(RCC->CR, RCC_CR_HSEON); -} - -/** - * @brief Check if HSE oscillator Ready - * @rmtoll CR HSERDY LL_RCC_HSE_IsReady - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_HSE_IsReady(void) -{ - return (READ_BIT(RCC->CR, RCC_CR_HSERDY) == (RCC_CR_HSERDY)); -} - -/** - * @} - */ - -/** @defgroup RCC_LL_EF_HSI HSI - * @{ - */ - -/** - * @brief Enable HSI oscillator - * @rmtoll CR HSION LL_RCC_HSI_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSI_Enable(void) -{ - SET_BIT(RCC->CR, RCC_CR_HSION); -} - -/** - * @brief Disable HSI oscillator - * @rmtoll CR HSION LL_RCC_HSI_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSI_Disable(void) -{ - CLEAR_BIT(RCC->CR, RCC_CR_HSION); -} - -/** - * @brief Check if HSI clock is ready - * @rmtoll CR HSIRDY LL_RCC_HSI_IsReady - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_HSI_IsReady(void) -{ - return (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == (RCC_CR_HSIRDY)); -} - -/** - * @brief Get HSI Calibration value - * @note When HSITRIM is written, HSICAL is updated with the sum of - * HSITRIM and the factory trim value - * @rmtoll CR HSICAL LL_RCC_HSI_GetCalibration - * @retval Between Min_Data = 0x00 and Max_Data = 0xFF - */ -__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibration(void) -{ - return (uint32_t)(READ_BIT(RCC->CR, RCC_CR_HSICAL) >> RCC_CR_HSICAL_Pos); -} - -/** - * @brief Set HSI Calibration trimming - * @note user-programmable trimming value that is added to the HSICAL - * @note Default value is 16, which, when added to the HSICAL value, - * should trim the HSI to 16 MHz +/- 1 % - * @rmtoll CR HSITRIM LL_RCC_HSI_SetCalibTrimming - * @param Value between Min_Data = 0x00 and Max_Data = 0x1F - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSI_SetCalibTrimming(uint32_t Value) -{ - MODIFY_REG(RCC->CR, RCC_CR_HSITRIM, Value << RCC_CR_HSITRIM_Pos); -} - -/** - * @brief Get HSI Calibration trimming - * @rmtoll CR HSITRIM LL_RCC_HSI_GetCalibTrimming - * @retval Between Min_Data = 0x00 and Max_Data = 0x1F - */ -__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibTrimming(void) -{ - return (uint32_t)(READ_BIT(RCC->CR, RCC_CR_HSITRIM) >> RCC_CR_HSITRIM_Pos); -} - -/** - * @} - */ - -#if defined(RCC_HSI48_SUPPORT) -/** @defgroup RCC_LL_EF_HSI48 HSI48 - * @{ - */ - -/** - * @brief Enable HSI48 - * @rmtoll CR2 HSI48ON LL_RCC_HSI48_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSI48_Enable(void) -{ - SET_BIT(RCC->CR2, RCC_CR2_HSI48ON); -} - -/** - * @brief Disable HSI48 - * @rmtoll CR2 HSI48ON LL_RCC_HSI48_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSI48_Disable(void) -{ - CLEAR_BIT(RCC->CR2, RCC_CR2_HSI48ON); -} - -/** - * @brief Check if HSI48 oscillator Ready - * @rmtoll CR2 HSI48RDY LL_RCC_HSI48_IsReady - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_HSI48_IsReady(void) -{ - return (READ_BIT(RCC->CR2, RCC_CR2_HSI48RDY) == (RCC_CR2_HSI48RDY)); -} - -/** - * @brief Get HSI48 Calibration value - * @rmtoll CR2 HSI48CAL LL_RCC_HSI48_GetCalibration - * @retval Between Min_Data = 0x00 and Max_Data = 0xFF - */ -__STATIC_INLINE uint32_t LL_RCC_HSI48_GetCalibration(void) -{ - return (uint32_t)(READ_BIT(RCC->CR2, RCC_CR2_HSI48CAL) >> RCC_POSITION_HSI48CAL); -} - -/** - * @} - */ - -#endif /* RCC_HSI48_SUPPORT */ - -/** @defgroup RCC_LL_EF_HSI14 HSI14 - * @{ - */ - -/** - * @brief Enable HSI14 - * @rmtoll CR2 HSI14ON LL_RCC_HSI14_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSI14_Enable(void) -{ - SET_BIT(RCC->CR2, RCC_CR2_HSI14ON); -} - -/** - * @brief Disable HSI14 - * @rmtoll CR2 HSI14ON LL_RCC_HSI14_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSI14_Disable(void) -{ - CLEAR_BIT(RCC->CR2, RCC_CR2_HSI14ON); -} - -/** - * @brief Check if HSI14 oscillator Ready - * @rmtoll CR2 HSI14RDY LL_RCC_HSI14_IsReady - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_HSI14_IsReady(void) -{ - return (READ_BIT(RCC->CR2, RCC_CR2_HSI14RDY) == (RCC_CR2_HSI14RDY)); -} - -/** - * @brief ADC interface can turn on the HSI14 oscillator - * @rmtoll CR2 HSI14DIS LL_RCC_HSI14_EnableADCControl - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSI14_EnableADCControl(void) -{ - CLEAR_BIT(RCC->CR2, RCC_CR2_HSI14DIS); -} - -/** - * @brief ADC interface can not turn on the HSI14 oscillator - * @rmtoll CR2 HSI14DIS LL_RCC_HSI14_DisableADCControl - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSI14_DisableADCControl(void) -{ - SET_BIT(RCC->CR2, RCC_CR2_HSI14DIS); -} - -/** - * @brief Set HSI14 Calibration trimming - * @note user-programmable trimming value that is added to the HSI14CAL - * @note Default value is 16, which, when added to the HSI14CAL value, - * should trim the HSI14 to 14 MHz +/- 1 % - * @rmtoll CR2 HSI14TRIM LL_RCC_HSI14_SetCalibTrimming - * @param Value between Min_Data = 0x00 and Max_Data = 0xFF - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSI14_SetCalibTrimming(uint32_t Value) -{ - MODIFY_REG(RCC->CR2, RCC_CR2_HSI14TRIM, Value << RCC_POSITION_HSI14TRIM); -} - -/** - * @brief Get HSI14 Calibration value - * @note When HSI14TRIM is written, HSI14CAL is updated with the sum of - * HSI14TRIM and the factory trim value - * @rmtoll CR2 HSI14TRIM LL_RCC_HSI14_GetCalibTrimming - * @retval Between Min_Data = 0x00 and Max_Data = 0x1F - */ -__STATIC_INLINE uint32_t LL_RCC_HSI14_GetCalibTrimming(void) -{ - return (uint32_t)(READ_BIT(RCC->CR2, RCC_CR2_HSI14TRIM) >> RCC_POSITION_HSI14TRIM); -} - -/** - * @brief Get HSI14 Calibration trimming - * @rmtoll CR2 HSI14CAL LL_RCC_HSI14_GetCalibration - * @retval Between Min_Data = 0x00 and Max_Data = 0x1F - */ -__STATIC_INLINE uint32_t LL_RCC_HSI14_GetCalibration(void) -{ - return (uint32_t)(READ_BIT(RCC->CR2, RCC_CR2_HSI14CAL) >> RCC_POSITION_HSI14CAL); -} - -/** - * @} - */ - -/** @defgroup RCC_LL_EF_LSE LSE - * @{ - */ - -/** - * @brief Enable Low Speed External (LSE) crystal. - * @rmtoll BDCR LSEON LL_RCC_LSE_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_LSE_Enable(void) -{ - SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); -} - -/** - * @brief Disable Low Speed External (LSE) crystal. - * @rmtoll BDCR LSEON LL_RCC_LSE_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_LSE_Disable(void) -{ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); -} - -/** - * @brief Enable external clock source (LSE bypass). - * @rmtoll BDCR LSEBYP LL_RCC_LSE_EnableBypass - * @retval None - */ -__STATIC_INLINE void LL_RCC_LSE_EnableBypass(void) -{ - SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); -} - -/** - * @brief Disable external clock source (LSE bypass). - * @rmtoll BDCR LSEBYP LL_RCC_LSE_DisableBypass - * @retval None - */ -__STATIC_INLINE void LL_RCC_LSE_DisableBypass(void) -{ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); -} - -/** - * @brief Set LSE oscillator drive capability - * @note The oscillator is in Xtal mode when it is not in bypass mode. - * @rmtoll BDCR LSEDRV LL_RCC_LSE_SetDriveCapability - * @param LSEDrive This parameter can be one of the following values: - * @arg @ref LL_RCC_LSEDRIVE_LOW - * @arg @ref LL_RCC_LSEDRIVE_MEDIUMLOW - * @arg @ref LL_RCC_LSEDRIVE_MEDIUMHIGH - * @arg @ref LL_RCC_LSEDRIVE_HIGH - * @retval None - */ -__STATIC_INLINE void LL_RCC_LSE_SetDriveCapability(uint32_t LSEDrive) -{ - MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEDRV, LSEDrive); -} - -/** - * @brief Get LSE oscillator drive capability - * @rmtoll BDCR LSEDRV LL_RCC_LSE_GetDriveCapability - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_LSEDRIVE_LOW - * @arg @ref LL_RCC_LSEDRIVE_MEDIUMLOW - * @arg @ref LL_RCC_LSEDRIVE_MEDIUMHIGH - * @arg @ref LL_RCC_LSEDRIVE_HIGH - */ -__STATIC_INLINE uint32_t LL_RCC_LSE_GetDriveCapability(void) -{ - return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_LSEDRV)); -} - -/** - * @brief Check if LSE oscillator Ready - * @rmtoll BDCR LSERDY LL_RCC_LSE_IsReady - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_LSE_IsReady(void) -{ - return (READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == (RCC_BDCR_LSERDY)); -} - -/** - * @} - */ - -/** @defgroup RCC_LL_EF_LSI LSI - * @{ - */ - -/** - * @brief Enable LSI Oscillator - * @rmtoll CSR LSION LL_RCC_LSI_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_LSI_Enable(void) -{ - SET_BIT(RCC->CSR, RCC_CSR_LSION); -} - -/** - * @brief Disable LSI Oscillator - * @rmtoll CSR LSION LL_RCC_LSI_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_LSI_Disable(void) -{ - CLEAR_BIT(RCC->CSR, RCC_CSR_LSION); -} - -/** - * @brief Check if LSI is Ready - * @rmtoll CSR LSIRDY LL_RCC_LSI_IsReady - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_LSI_IsReady(void) -{ - return (READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) == (RCC_CSR_LSIRDY)); -} - -/** - * @} - */ - -/** @defgroup RCC_LL_EF_System System - * @{ - */ - -/** - * @brief Configure the system clock source - * @rmtoll CFGR SW LL_RCC_SetSysClkSource - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_SYS_CLKSOURCE_HSI - * @arg @ref LL_RCC_SYS_CLKSOURCE_HSE - * @arg @ref LL_RCC_SYS_CLKSOURCE_PLL - * @arg @ref LL_RCC_SYS_CLKSOURCE_HSI48 (*) - * - * (*) value not defined in all devices - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetSysClkSource(uint32_t Source) -{ - MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, Source); -} - -/** - * @brief Get the system clock source - * @rmtoll CFGR SWS LL_RCC_GetSysClkSource - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSI - * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSE - * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_PLL - * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSI48 (*) - * - * (*) value not defined in all devices - */ -__STATIC_INLINE uint32_t LL_RCC_GetSysClkSource(void) -{ - return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_SWS)); -} - -/** - * @brief Set AHB prescaler - * @rmtoll CFGR HPRE LL_RCC_SetAHBPrescaler - * @param Prescaler This parameter can be one of the following values: - * @arg @ref LL_RCC_SYSCLK_DIV_1 - * @arg @ref LL_RCC_SYSCLK_DIV_2 - * @arg @ref LL_RCC_SYSCLK_DIV_4 - * @arg @ref LL_RCC_SYSCLK_DIV_8 - * @arg @ref LL_RCC_SYSCLK_DIV_16 - * @arg @ref LL_RCC_SYSCLK_DIV_64 - * @arg @ref LL_RCC_SYSCLK_DIV_128 - * @arg @ref LL_RCC_SYSCLK_DIV_256 - * @arg @ref LL_RCC_SYSCLK_DIV_512 - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetAHBPrescaler(uint32_t Prescaler) -{ - MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, Prescaler); -} - -/** - * @brief Set APB1 prescaler - * @rmtoll CFGR PPRE LL_RCC_SetAPB1Prescaler - * @param Prescaler This parameter can be one of the following values: - * @arg @ref LL_RCC_APB1_DIV_1 - * @arg @ref LL_RCC_APB1_DIV_2 - * @arg @ref LL_RCC_APB1_DIV_4 - * @arg @ref LL_RCC_APB1_DIV_8 - * @arg @ref LL_RCC_APB1_DIV_16 - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetAPB1Prescaler(uint32_t Prescaler) -{ - MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE, Prescaler); -} - -/** - * @brief Get AHB prescaler - * @rmtoll CFGR HPRE LL_RCC_GetAHBPrescaler - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_SYSCLK_DIV_1 - * @arg @ref LL_RCC_SYSCLK_DIV_2 - * @arg @ref LL_RCC_SYSCLK_DIV_4 - * @arg @ref LL_RCC_SYSCLK_DIV_8 - * @arg @ref LL_RCC_SYSCLK_DIV_16 - * @arg @ref LL_RCC_SYSCLK_DIV_64 - * @arg @ref LL_RCC_SYSCLK_DIV_128 - * @arg @ref LL_RCC_SYSCLK_DIV_256 - * @arg @ref LL_RCC_SYSCLK_DIV_512 - */ -__STATIC_INLINE uint32_t LL_RCC_GetAHBPrescaler(void) -{ - return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_HPRE)); -} - -/** - * @brief Get APB1 prescaler - * @rmtoll CFGR PPRE LL_RCC_GetAPB1Prescaler - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_APB1_DIV_1 - * @arg @ref LL_RCC_APB1_DIV_2 - * @arg @ref LL_RCC_APB1_DIV_4 - * @arg @ref LL_RCC_APB1_DIV_8 - * @arg @ref LL_RCC_APB1_DIV_16 - */ -__STATIC_INLINE uint32_t LL_RCC_GetAPB1Prescaler(void) -{ - return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PPRE)); -} - -/** - * @} - */ - -/** @defgroup RCC_LL_EF_MCO MCO - * @{ - */ - -/** - * @brief Configure MCOx - * @rmtoll CFGR MCO LL_RCC_ConfigMCO\n - * CFGR MCOPRE LL_RCC_ConfigMCO\n - * CFGR PLLNODIV LL_RCC_ConfigMCO - * @param MCOxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_MCO1SOURCE_NOCLOCK - * @arg @ref LL_RCC_MCO1SOURCE_HSI14 - * @arg @ref LL_RCC_MCO1SOURCE_SYSCLK - * @arg @ref LL_RCC_MCO1SOURCE_HSI - * @arg @ref LL_RCC_MCO1SOURCE_HSE - * @arg @ref LL_RCC_MCO1SOURCE_LSI - * @arg @ref LL_RCC_MCO1SOURCE_LSE - * @arg @ref LL_RCC_MCO1SOURCE_HSI48 (*) - * @arg @ref LL_RCC_MCO1SOURCE_PLLCLK (*) - * @arg @ref LL_RCC_MCO1SOURCE_PLLCLK_DIV_2 - * - * (*) value not defined in all devices - * @param MCOxPrescaler This parameter can be one of the following values: - * @arg @ref LL_RCC_MCO1_DIV_1 - * @arg @ref LL_RCC_MCO1_DIV_2 (*) - * @arg @ref LL_RCC_MCO1_DIV_4 (*) - * @arg @ref LL_RCC_MCO1_DIV_8 (*) - * @arg @ref LL_RCC_MCO1_DIV_16 (*) - * @arg @ref LL_RCC_MCO1_DIV_32 (*) - * @arg @ref LL_RCC_MCO1_DIV_64 (*) - * @arg @ref LL_RCC_MCO1_DIV_128 (*) - * - * (*) value not defined in all devices - * @retval None - */ -__STATIC_INLINE void LL_RCC_ConfigMCO(uint32_t MCOxSource, uint32_t MCOxPrescaler) -{ -#if defined(RCC_CFGR_MCOPRE) -#if defined(RCC_CFGR_PLLNODIV) - MODIFY_REG(RCC->CFGR, RCC_CFGR_MCOSEL | RCC_CFGR_MCOPRE | RCC_CFGR_PLLNODIV, MCOxSource | MCOxPrescaler); -#else - MODIFY_REG(RCC->CFGR, RCC_CFGR_MCOSEL | RCC_CFGR_MCOPRE, MCOxSource | MCOxPrescaler); -#endif /* RCC_CFGR_PLLNODIV */ -#else - MODIFY_REG(RCC->CFGR, RCC_CFGR_MCOSEL, MCOxSource); -#endif /* RCC_CFGR_MCOPRE */ -} - -/** - * @} - */ - -/** @defgroup RCC_LL_EF_Peripheral_Clock_Source Peripheral Clock Source - * @{ - */ - -/** - * @brief Configure USARTx clock source - * @rmtoll CFGR3 USART1SW LL_RCC_SetUSARTClockSource\n - * CFGR3 USART2SW LL_RCC_SetUSARTClockSource\n - * CFGR3 USART3SW LL_RCC_SetUSARTClockSource - * @param USARTxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_USART1_CLKSOURCE_PCLK1 - * @arg @ref LL_RCC_USART1_CLKSOURCE_SYSCLK - * @arg @ref LL_RCC_USART1_CLKSOURCE_LSE - * @arg @ref LL_RCC_USART1_CLKSOURCE_HSI - * @arg @ref LL_RCC_USART2_CLKSOURCE_PCLK1 (*) - * @arg @ref LL_RCC_USART2_CLKSOURCE_SYSCLK (*) - * @arg @ref LL_RCC_USART2_CLKSOURCE_LSE (*) - * @arg @ref LL_RCC_USART2_CLKSOURCE_HSI (*) - * @arg @ref LL_RCC_USART3_CLKSOURCE_PCLK1 (*) - * @arg @ref LL_RCC_USART3_CLKSOURCE_SYSCLK (*) - * @arg @ref LL_RCC_USART3_CLKSOURCE_LSE (*) - * @arg @ref LL_RCC_USART3_CLKSOURCE_HSI (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetUSARTClockSource(uint32_t USARTxSource) -{ - MODIFY_REG(RCC->CFGR3, (RCC_CFGR3_USART1SW << ((USARTxSource & 0xFF000000U) >> 24U)), (USARTxSource & 0x00FFFFFFU)); -} - -/** - * @brief Configure I2Cx clock source - * @rmtoll CFGR3 I2C1SW LL_RCC_SetI2CClockSource - * @param I2CxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_I2C1_CLKSOURCE_HSI - * @arg @ref LL_RCC_I2C1_CLKSOURCE_SYSCLK - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetI2CClockSource(uint32_t I2CxSource) -{ - MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C1SW, I2CxSource); -} - -#if defined(CEC) -/** - * @brief Configure CEC clock source - * @rmtoll CFGR3 CECSW LL_RCC_SetCECClockSource - * @param CECxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_CEC_CLKSOURCE_HSI_DIV244 - * @arg @ref LL_RCC_CEC_CLKSOURCE_LSE - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetCECClockSource(uint32_t CECxSource) -{ - MODIFY_REG(RCC->CFGR3, RCC_CFGR3_CECSW, CECxSource); -} -#endif /* CEC */ - -#if defined(USB) -/** - * @brief Configure USB clock source - * @rmtoll CFGR3 USBSW LL_RCC_SetUSBClockSource - * @param USBxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_USB_CLKSOURCE_HSI48 (*) - * @arg @ref LL_RCC_USB_CLKSOURCE_NONE (*) - * @arg @ref LL_RCC_USB_CLKSOURCE_PLL - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetUSBClockSource(uint32_t USBxSource) -{ - MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USBSW, USBxSource); -} -#endif /* USB */ - -/** - * @brief Get USARTx clock source - * @rmtoll CFGR3 USART1SW LL_RCC_GetUSARTClockSource\n - * CFGR3 USART2SW LL_RCC_GetUSARTClockSource\n - * CFGR3 USART3SW LL_RCC_GetUSARTClockSource - * @param USARTx This parameter can be one of the following values: - * @arg @ref LL_RCC_USART1_CLKSOURCE - * @arg @ref LL_RCC_USART2_CLKSOURCE (*) - * @arg @ref LL_RCC_USART3_CLKSOURCE (*) - * - * (*) value not defined in all devices. - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_USART1_CLKSOURCE_PCLK1 - * @arg @ref LL_RCC_USART1_CLKSOURCE_SYSCLK - * @arg @ref LL_RCC_USART1_CLKSOURCE_LSE - * @arg @ref LL_RCC_USART1_CLKSOURCE_HSI - * @arg @ref LL_RCC_USART2_CLKSOURCE_PCLK1 (*) - * @arg @ref LL_RCC_USART2_CLKSOURCE_SYSCLK (*) - * @arg @ref LL_RCC_USART2_CLKSOURCE_LSE (*) - * @arg @ref LL_RCC_USART2_CLKSOURCE_HSI (*) - * @arg @ref LL_RCC_USART3_CLKSOURCE_PCLK1 (*) - * @arg @ref LL_RCC_USART3_CLKSOURCE_SYSCLK (*) - * @arg @ref LL_RCC_USART3_CLKSOURCE_LSE (*) - * @arg @ref LL_RCC_USART3_CLKSOURCE_HSI (*) - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_GetUSARTClockSource(uint32_t USARTx) -{ - return (uint32_t)(READ_BIT(RCC->CFGR3, (RCC_CFGR3_USART1SW << USARTx)) | (USARTx << 24U)); -} - -/** - * @brief Get I2Cx clock source - * @rmtoll CFGR3 I2C1SW LL_RCC_GetI2CClockSource - * @param I2Cx This parameter can be one of the following values: - * @arg @ref LL_RCC_I2C1_CLKSOURCE - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_I2C1_CLKSOURCE_HSI - * @arg @ref LL_RCC_I2C1_CLKSOURCE_SYSCLK - */ -__STATIC_INLINE uint32_t LL_RCC_GetI2CClockSource(uint32_t I2Cx) -{ - return (uint32_t)(READ_BIT(RCC->CFGR3, I2Cx)); -} - -#if defined(CEC) -/** - * @brief Get CEC clock source - * @rmtoll CFGR3 CECSW LL_RCC_GetCECClockSource - * @param CECx This parameter can be one of the following values: - * @arg @ref LL_RCC_CEC_CLKSOURCE - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_CEC_CLKSOURCE_HSI_DIV244 - * @arg @ref LL_RCC_CEC_CLKSOURCE_LSE - */ -__STATIC_INLINE uint32_t LL_RCC_GetCECClockSource(uint32_t CECx) -{ - return (uint32_t)(READ_BIT(RCC->CFGR3, CECx)); -} -#endif /* CEC */ - -#if defined(USB) -/** - * @brief Get USBx clock source - * @rmtoll CFGR3 USBSW LL_RCC_GetUSBClockSource - * @param USBx This parameter can be one of the following values: - * @arg @ref LL_RCC_USB_CLKSOURCE - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_USB_CLKSOURCE_HSI48 (*) - * @arg @ref LL_RCC_USB_CLKSOURCE_NONE (*) - * @arg @ref LL_RCC_USB_CLKSOURCE_PLL - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_GetUSBClockSource(uint32_t USBx) -{ - return (uint32_t)(READ_BIT(RCC->CFGR3, USBx)); -} -#endif /* USB */ - -/** - * @} - */ - -/** @defgroup RCC_LL_EF_RTC RTC - * @{ - */ - -/** - * @brief Set RTC Clock Source - * @note Once the RTC clock source has been selected, it cannot be changed any more unless - * the Backup domain is reset. The BDRST bit can be used to reset them. - * @rmtoll BDCR RTCSEL LL_RCC_SetRTCClockSource - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE - * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE - * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI - * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE_DIV32 - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetRTCClockSource(uint32_t Source) -{ - MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, Source); -} - -/** - * @brief Get RTC Clock Source - * @rmtoll BDCR RTCSEL LL_RCC_GetRTCClockSource - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE - * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE - * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI - * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE_DIV32 - */ -__STATIC_INLINE uint32_t LL_RCC_GetRTCClockSource(void) -{ - return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)); -} - -/** - * @brief Enable RTC - * @rmtoll BDCR RTCEN LL_RCC_EnableRTC - * @retval None - */ -__STATIC_INLINE void LL_RCC_EnableRTC(void) -{ - SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN); -} - -/** - * @brief Disable RTC - * @rmtoll BDCR RTCEN LL_RCC_DisableRTC - * @retval None - */ -__STATIC_INLINE void LL_RCC_DisableRTC(void) -{ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN); -} - -/** - * @brief Check if RTC has been enabled or not - * @rmtoll BDCR RTCEN LL_RCC_IsEnabledRTC - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsEnabledRTC(void) -{ - return (READ_BIT(RCC->BDCR, RCC_BDCR_RTCEN) == (RCC_BDCR_RTCEN)); -} - -/** - * @brief Force the Backup domain reset - * @rmtoll BDCR BDRST LL_RCC_ForceBackupDomainReset - * @retval None - */ -__STATIC_INLINE void LL_RCC_ForceBackupDomainReset(void) -{ - SET_BIT(RCC->BDCR, RCC_BDCR_BDRST); -} - -/** - * @brief Release the Backup domain reset - * @rmtoll BDCR BDRST LL_RCC_ReleaseBackupDomainReset - * @retval None - */ -__STATIC_INLINE void LL_RCC_ReleaseBackupDomainReset(void) -{ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST); -} - -/** - * @} - */ - -/** @defgroup RCC_LL_EF_PLL PLL - * @{ - */ - -/** - * @brief Enable PLL - * @rmtoll CR PLLON LL_RCC_PLL_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_Enable(void) -{ - SET_BIT(RCC->CR, RCC_CR_PLLON); -} - -/** - * @brief Disable PLL - * @note Cannot be disabled if the PLL clock is used as the system clock - * @rmtoll CR PLLON LL_RCC_PLL_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_Disable(void) -{ - CLEAR_BIT(RCC->CR, RCC_CR_PLLON); -} - -/** - * @brief Check if PLL Ready - * @rmtoll CR PLLRDY LL_RCC_PLL_IsReady - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_IsReady(void) -{ - return (READ_BIT(RCC->CR, RCC_CR_PLLRDY) == (RCC_CR_PLLRDY)); -} - -#if defined(RCC_PLLSRC_PREDIV1_SUPPORT) -/** - * @brief Configure PLL used for SYSCLK Domain - * @rmtoll CFGR PLLSRC LL_RCC_PLL_ConfigDomain_SYS\n - * CFGR PLLMUL LL_RCC_PLL_ConfigDomain_SYS\n - * CFGR2 PREDIV LL_RCC_PLL_ConfigDomain_SYS - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @arg @ref LL_RCC_PLLSOURCE_HSI48 (*) - * - * (*) value not defined in all devices - * @param PLLMul This parameter can be one of the following values: - * @arg @ref LL_RCC_PLL_MUL_2 - * @arg @ref LL_RCC_PLL_MUL_3 - * @arg @ref LL_RCC_PLL_MUL_4 - * @arg @ref LL_RCC_PLL_MUL_5 - * @arg @ref LL_RCC_PLL_MUL_6 - * @arg @ref LL_RCC_PLL_MUL_7 - * @arg @ref LL_RCC_PLL_MUL_8 - * @arg @ref LL_RCC_PLL_MUL_9 - * @arg @ref LL_RCC_PLL_MUL_10 - * @arg @ref LL_RCC_PLL_MUL_11 - * @arg @ref LL_RCC_PLL_MUL_12 - * @arg @ref LL_RCC_PLL_MUL_13 - * @arg @ref LL_RCC_PLL_MUL_14 - * @arg @ref LL_RCC_PLL_MUL_15 - * @arg @ref LL_RCC_PLL_MUL_16 - * @param PLLDiv This parameter can be one of the following values: - * @arg @ref LL_RCC_PREDIV_DIV_1 - * @arg @ref LL_RCC_PREDIV_DIV_2 - * @arg @ref LL_RCC_PREDIV_DIV_3 - * @arg @ref LL_RCC_PREDIV_DIV_4 - * @arg @ref LL_RCC_PREDIV_DIV_5 - * @arg @ref LL_RCC_PREDIV_DIV_6 - * @arg @ref LL_RCC_PREDIV_DIV_7 - * @arg @ref LL_RCC_PREDIV_DIV_8 - * @arg @ref LL_RCC_PREDIV_DIV_9 - * @arg @ref LL_RCC_PREDIV_DIV_10 - * @arg @ref LL_RCC_PREDIV_DIV_11 - * @arg @ref LL_RCC_PREDIV_DIV_12 - * @arg @ref LL_RCC_PREDIV_DIV_13 - * @arg @ref LL_RCC_PREDIV_DIV_14 - * @arg @ref LL_RCC_PREDIV_DIV_15 - * @arg @ref LL_RCC_PREDIV_DIV_16 - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SYS(uint32_t Source, uint32_t PLLMul, uint32_t PLLDiv) -{ - MODIFY_REG(RCC->CFGR, RCC_CFGR_PLLSRC | RCC_CFGR_PLLMUL, Source | PLLMul); - MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, PLLDiv); -} - -#else - -/** - * @brief Configure PLL used for SYSCLK Domain - * @rmtoll CFGR PLLSRC LL_RCC_PLL_ConfigDomain_SYS\n - * CFGR PLLMUL LL_RCC_PLL_ConfigDomain_SYS\n - * CFGR2 PREDIV LL_RCC_PLL_ConfigDomain_SYS - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI_DIV_2 - * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_1 - * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_2 - * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_3 - * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_4 - * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_5 - * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_6 - * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_7 - * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_8 - * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_9 - * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_10 - * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_11 - * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_12 - * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_13 - * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_14 - * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_15 - * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_16 - * @param PLLMul This parameter can be one of the following values: - * @arg @ref LL_RCC_PLL_MUL_2 - * @arg @ref LL_RCC_PLL_MUL_3 - * @arg @ref LL_RCC_PLL_MUL_4 - * @arg @ref LL_RCC_PLL_MUL_5 - * @arg @ref LL_RCC_PLL_MUL_6 - * @arg @ref LL_RCC_PLL_MUL_7 - * @arg @ref LL_RCC_PLL_MUL_8 - * @arg @ref LL_RCC_PLL_MUL_9 - * @arg @ref LL_RCC_PLL_MUL_10 - * @arg @ref LL_RCC_PLL_MUL_11 - * @arg @ref LL_RCC_PLL_MUL_12 - * @arg @ref LL_RCC_PLL_MUL_13 - * @arg @ref LL_RCC_PLL_MUL_14 - * @arg @ref LL_RCC_PLL_MUL_15 - * @arg @ref LL_RCC_PLL_MUL_16 - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SYS(uint32_t Source, uint32_t PLLMul) -{ - MODIFY_REG(RCC->CFGR, RCC_CFGR_PLLSRC | RCC_CFGR_PLLMUL, (Source & RCC_CFGR_PLLSRC) | PLLMul); - MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, (Source & RCC_CFGR2_PREDIV)); -} -#endif /* RCC_PLLSRC_PREDIV1_SUPPORT */ - -/** - * @brief Configure PLL clock source - * @rmtoll CFGR PLLSRC LL_RCC_PLL_SetMainSource - * @param PLLSource This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_NONE - * @arg @ref LL_RCC_PLLSOURCE_HSI (*) - * @arg @ref LL_RCC_PLLSOURCE_HSI_DIV_2 (*) - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @arg @ref LL_RCC_PLLSOURCE_HSI48 (*) - * - * (*) value not defined in all devices - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_SetMainSource(uint32_t PLLSource) -{ - MODIFY_REG(RCC->CFGR, RCC_CFGR_PLLSRC, PLLSource); -} - -/** - * @brief Get the oscillator used as PLL clock source. - * @rmtoll CFGR PLLSRC LL_RCC_PLL_GetMainSource - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_NONE - * @arg @ref LL_RCC_PLLSOURCE_HSI (*) - * @arg @ref LL_RCC_PLLSOURCE_HSI_DIV_2 (*) - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @arg @ref LL_RCC_PLLSOURCE_HSI48 (*) - * - * (*) value not defined in all devices - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_GetMainSource(void) -{ - return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLSRC)); -} - -/** - * @brief Get PLL multiplication Factor - * @rmtoll CFGR PLLMUL LL_RCC_PLL_GetMultiplicator - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLL_MUL_2 - * @arg @ref LL_RCC_PLL_MUL_3 - * @arg @ref LL_RCC_PLL_MUL_4 - * @arg @ref LL_RCC_PLL_MUL_5 - * @arg @ref LL_RCC_PLL_MUL_6 - * @arg @ref LL_RCC_PLL_MUL_7 - * @arg @ref LL_RCC_PLL_MUL_8 - * @arg @ref LL_RCC_PLL_MUL_9 - * @arg @ref LL_RCC_PLL_MUL_10 - * @arg @ref LL_RCC_PLL_MUL_11 - * @arg @ref LL_RCC_PLL_MUL_12 - * @arg @ref LL_RCC_PLL_MUL_13 - * @arg @ref LL_RCC_PLL_MUL_14 - * @arg @ref LL_RCC_PLL_MUL_15 - * @arg @ref LL_RCC_PLL_MUL_16 - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_GetMultiplicator(void) -{ - return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLMUL)); -} - -/** - * @brief Get PREDIV division factor for the main PLL - * @note They can be written only when the PLL is disabled - * @rmtoll CFGR2 PREDIV LL_RCC_PLL_GetPrediv - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PREDIV_DIV_1 - * @arg @ref LL_RCC_PREDIV_DIV_2 - * @arg @ref LL_RCC_PREDIV_DIV_3 - * @arg @ref LL_RCC_PREDIV_DIV_4 - * @arg @ref LL_RCC_PREDIV_DIV_5 - * @arg @ref LL_RCC_PREDIV_DIV_6 - * @arg @ref LL_RCC_PREDIV_DIV_7 - * @arg @ref LL_RCC_PREDIV_DIV_8 - * @arg @ref LL_RCC_PREDIV_DIV_9 - * @arg @ref LL_RCC_PREDIV_DIV_10 - * @arg @ref LL_RCC_PREDIV_DIV_11 - * @arg @ref LL_RCC_PREDIV_DIV_12 - * @arg @ref LL_RCC_PREDIV_DIV_13 - * @arg @ref LL_RCC_PREDIV_DIV_14 - * @arg @ref LL_RCC_PREDIV_DIV_15 - * @arg @ref LL_RCC_PREDIV_DIV_16 - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_GetPrediv(void) -{ - return (uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_PREDIV)); -} - -/** - * @} - */ - -/** @defgroup RCC_LL_EF_FLAG_Management FLAG Management - * @{ - */ - -/** - * @brief Clear LSI ready interrupt flag - * @rmtoll CIR LSIRDYC LL_RCC_ClearFlag_LSIRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_ClearFlag_LSIRDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_LSIRDYC); -} - -/** - * @brief Clear LSE ready interrupt flag - * @rmtoll CIR LSERDYC LL_RCC_ClearFlag_LSERDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_ClearFlag_LSERDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_LSERDYC); -} - -/** - * @brief Clear HSI ready interrupt flag - * @rmtoll CIR HSIRDYC LL_RCC_ClearFlag_HSIRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_ClearFlag_HSIRDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_HSIRDYC); -} - -/** - * @brief Clear HSE ready interrupt flag - * @rmtoll CIR HSERDYC LL_RCC_ClearFlag_HSERDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_ClearFlag_HSERDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_HSERDYC); -} - -/** - * @brief Clear PLL ready interrupt flag - * @rmtoll CIR PLLRDYC LL_RCC_ClearFlag_PLLRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_ClearFlag_PLLRDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_PLLRDYC); -} - -/** - * @brief Clear HSI14 ready interrupt flag - * @rmtoll CIR HSI14RDYC LL_RCC_ClearFlag_HSI14RDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_ClearFlag_HSI14RDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_HSI14RDYC); -} - -#if defined(RCC_HSI48_SUPPORT) -/** - * @brief Clear HSI48 ready interrupt flag - * @rmtoll CIR HSI48RDYC LL_RCC_ClearFlag_HSI48RDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_ClearFlag_HSI48RDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_HSI48RDYC); -} -#endif /* RCC_HSI48_SUPPORT */ - -/** - * @brief Clear Clock security system interrupt flag - * @rmtoll CIR CSSC LL_RCC_ClearFlag_HSECSS - * @retval None - */ -__STATIC_INLINE void LL_RCC_ClearFlag_HSECSS(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_CSSC); -} - -/** - * @brief Check if LSI ready interrupt occurred or not - * @rmtoll CIR LSIRDYF LL_RCC_IsActiveFlag_LSIRDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSIRDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_LSIRDYF) == (RCC_CIR_LSIRDYF)); -} - -/** - * @brief Check if LSE ready interrupt occurred or not - * @rmtoll CIR LSERDYF LL_RCC_IsActiveFlag_LSERDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSERDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_LSERDYF) == (RCC_CIR_LSERDYF)); -} - -/** - * @brief Check if HSI ready interrupt occurred or not - * @rmtoll CIR HSIRDYF LL_RCC_IsActiveFlag_HSIRDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSIRDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_HSIRDYF) == (RCC_CIR_HSIRDYF)); -} - -/** - * @brief Check if HSE ready interrupt occurred or not - * @rmtoll CIR HSERDYF LL_RCC_IsActiveFlag_HSERDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSERDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_HSERDYF) == (RCC_CIR_HSERDYF)); -} - -/** - * @brief Check if PLL ready interrupt occurred or not - * @rmtoll CIR PLLRDYF LL_RCC_IsActiveFlag_PLLRDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLRDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_PLLRDYF) == (RCC_CIR_PLLRDYF)); -} - -/** - * @brief Check if HSI14 ready interrupt occurred or not - * @rmtoll CIR HSI14RDYF LL_RCC_IsActiveFlag_HSI14RDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSI14RDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_HSI14RDYF) == (RCC_CIR_HSI14RDYF)); -} - -#if defined(RCC_HSI48_SUPPORT) -/** - * @brief Check if HSI48 ready interrupt occurred or not - * @rmtoll CIR HSI48RDYF LL_RCC_IsActiveFlag_HSI48RDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSI48RDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_HSI48RDYF) == (RCC_CIR_HSI48RDYF)); -} -#endif /* RCC_HSI48_SUPPORT */ - -/** - * @brief Check if Clock security system interrupt occurred or not - * @rmtoll CIR CSSF LL_RCC_IsActiveFlag_HSECSS - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSECSS(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_CSSF) == (RCC_CIR_CSSF)); -} - -/** - * @brief Check if RCC flag Independent Watchdog reset is set or not. - * @rmtoll CSR IWDGRSTF LL_RCC_IsActiveFlag_IWDGRST - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_IWDGRST(void) -{ - return (READ_BIT(RCC->CSR, RCC_CSR_IWDGRSTF) == (RCC_CSR_IWDGRSTF)); -} - -/** - * @brief Check if RCC flag Low Power reset is set or not. - * @rmtoll CSR LPWRRSTF LL_RCC_IsActiveFlag_LPWRRST - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LPWRRST(void) -{ - return (READ_BIT(RCC->CSR, RCC_CSR_LPWRRSTF) == (RCC_CSR_LPWRRSTF)); -} - -/** - * @brief Check if RCC flag is set or not. - * @rmtoll CSR OBLRSTF LL_RCC_IsActiveFlag_OBLRST - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_OBLRST(void) -{ - return (READ_BIT(RCC->CSR, RCC_CSR_OBLRSTF) == (RCC_CSR_OBLRSTF)); -} - -/** - * @brief Check if RCC flag Pin reset is set or not. - * @rmtoll CSR PINRSTF LL_RCC_IsActiveFlag_PINRST - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PINRST(void) -{ - return (READ_BIT(RCC->CSR, RCC_CSR_PINRSTF) == (RCC_CSR_PINRSTF)); -} - -/** - * @brief Check if RCC flag POR/PDR reset is set or not. - * @rmtoll CSR PORRSTF LL_RCC_IsActiveFlag_PORRST - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PORRST(void) -{ - return (READ_BIT(RCC->CSR, RCC_CSR_PORRSTF) == (RCC_CSR_PORRSTF)); -} - -/** - * @brief Check if RCC flag Software reset is set or not. - * @rmtoll CSR SFTRSTF LL_RCC_IsActiveFlag_SFTRST - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_SFTRST(void) -{ - return (READ_BIT(RCC->CSR, RCC_CSR_SFTRSTF) == (RCC_CSR_SFTRSTF)); -} - -/** - * @brief Check if RCC flag Window Watchdog reset is set or not. - * @rmtoll CSR WWDGRSTF LL_RCC_IsActiveFlag_WWDGRST - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_WWDGRST(void) -{ - return (READ_BIT(RCC->CSR, RCC_CSR_WWDGRSTF) == (RCC_CSR_WWDGRSTF)); -} - -#if defined(RCC_CSR_V18PWRRSTF) -/** - * @brief Check if RCC Reset flag of the 1.8 V domain is set or not. - * @rmtoll CSR V18PWRRSTF LL_RCC_IsActiveFlag_V18PWRRST - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_V18PWRRST(void) -{ - return (READ_BIT(RCC->CSR, RCC_CSR_V18PWRRSTF) == (RCC_CSR_V18PWRRSTF)); -} -#endif /* RCC_CSR_V18PWRRSTF */ - -/** - * @brief Set RMVF bit to clear the reset flags. - * @rmtoll CSR RMVF LL_RCC_ClearResetFlags - * @retval None - */ -__STATIC_INLINE void LL_RCC_ClearResetFlags(void) -{ - SET_BIT(RCC->CSR, RCC_CSR_RMVF); -} - -/** - * @} - */ - -/** @defgroup RCC_LL_EF_IT_Management IT Management - * @{ - */ - -/** - * @brief Enable LSI ready interrupt - * @rmtoll CIR LSIRDYIE LL_RCC_EnableIT_LSIRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_EnableIT_LSIRDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_LSIRDYIE); -} - -/** - * @brief Enable LSE ready interrupt - * @rmtoll CIR LSERDYIE LL_RCC_EnableIT_LSERDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_EnableIT_LSERDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_LSERDYIE); -} - -/** - * @brief Enable HSI ready interrupt - * @rmtoll CIR HSIRDYIE LL_RCC_EnableIT_HSIRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_EnableIT_HSIRDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_HSIRDYIE); -} - -/** - * @brief Enable HSE ready interrupt - * @rmtoll CIR HSERDYIE LL_RCC_EnableIT_HSERDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_EnableIT_HSERDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_HSERDYIE); -} - -/** - * @brief Enable PLL ready interrupt - * @rmtoll CIR PLLRDYIE LL_RCC_EnableIT_PLLRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_EnableIT_PLLRDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_PLLRDYIE); -} - -/** - * @brief Enable HSI14 ready interrupt - * @rmtoll CIR HSI14RDYIE LL_RCC_EnableIT_HSI14RDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_EnableIT_HSI14RDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_HSI14RDYIE); -} - -#if defined(RCC_HSI48_SUPPORT) -/** - * @brief Enable HSI48 ready interrupt - * @rmtoll CIR HSI48RDYIE LL_RCC_EnableIT_HSI48RDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_EnableIT_HSI48RDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_HSI48RDYIE); -} -#endif /* RCC_HSI48_SUPPORT */ - -/** - * @brief Disable LSI ready interrupt - * @rmtoll CIR LSIRDYIE LL_RCC_DisableIT_LSIRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_DisableIT_LSIRDY(void) -{ - CLEAR_BIT(RCC->CIR, RCC_CIR_LSIRDYIE); -} - -/** - * @brief Disable LSE ready interrupt - * @rmtoll CIR LSERDYIE LL_RCC_DisableIT_LSERDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_DisableIT_LSERDY(void) -{ - CLEAR_BIT(RCC->CIR, RCC_CIR_LSERDYIE); -} - -/** - * @brief Disable HSI ready interrupt - * @rmtoll CIR HSIRDYIE LL_RCC_DisableIT_HSIRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_DisableIT_HSIRDY(void) -{ - CLEAR_BIT(RCC->CIR, RCC_CIR_HSIRDYIE); -} - -/** - * @brief Disable HSE ready interrupt - * @rmtoll CIR HSERDYIE LL_RCC_DisableIT_HSERDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_DisableIT_HSERDY(void) -{ - CLEAR_BIT(RCC->CIR, RCC_CIR_HSERDYIE); -} - -/** - * @brief Disable PLL ready interrupt - * @rmtoll CIR PLLRDYIE LL_RCC_DisableIT_PLLRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_DisableIT_PLLRDY(void) -{ - CLEAR_BIT(RCC->CIR, RCC_CIR_PLLRDYIE); -} - -/** - * @brief Disable HSI14 ready interrupt - * @rmtoll CIR HSI14RDYIE LL_RCC_DisableIT_HSI14RDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_DisableIT_HSI14RDY(void) -{ - CLEAR_BIT(RCC->CIR, RCC_CIR_HSI14RDYIE); -} - -#if defined(RCC_HSI48_SUPPORT) -/** - * @brief Disable HSI48 ready interrupt - * @rmtoll CIR HSI48RDYIE LL_RCC_DisableIT_HSI48RDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_DisableIT_HSI48RDY(void) -{ - CLEAR_BIT(RCC->CIR, RCC_CIR_HSI48RDYIE); -} -#endif /* RCC_HSI48_SUPPORT */ - -/** - * @brief Checks if LSI ready interrupt source is enabled or disabled. - * @rmtoll CIR LSIRDYIE LL_RCC_IsEnabledIT_LSIRDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSIRDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_LSIRDYIE) == (RCC_CIR_LSIRDYIE)); -} - -/** - * @brief Checks if LSE ready interrupt source is enabled or disabled. - * @rmtoll CIR LSERDYIE LL_RCC_IsEnabledIT_LSERDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSERDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_LSERDYIE) == (RCC_CIR_LSERDYIE)); -} - -/** - * @brief Checks if HSI ready interrupt source is enabled or disabled. - * @rmtoll CIR HSIRDYIE LL_RCC_IsEnabledIT_HSIRDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSIRDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_HSIRDYIE) == (RCC_CIR_HSIRDYIE)); -} - -/** - * @brief Checks if HSE ready interrupt source is enabled or disabled. - * @rmtoll CIR HSERDYIE LL_RCC_IsEnabledIT_HSERDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSERDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_HSERDYIE) == (RCC_CIR_HSERDYIE)); -} - -/** - * @brief Checks if PLL ready interrupt source is enabled or disabled. - * @rmtoll CIR PLLRDYIE LL_RCC_IsEnabledIT_PLLRDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLRDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_PLLRDYIE) == (RCC_CIR_PLLRDYIE)); -} - -/** - * @brief Checks if HSI14 ready interrupt source is enabled or disabled. - * @rmtoll CIR HSI14RDYIE LL_RCC_IsEnabledIT_HSI14RDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSI14RDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_HSI14RDYIE) == (RCC_CIR_HSI14RDYIE)); -} - -#if defined(RCC_HSI48_SUPPORT) -/** - * @brief Checks if HSI48 ready interrupt source is enabled or disabled. - * @rmtoll CIR HSI48RDYIE LL_RCC_IsEnabledIT_HSI48RDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSI48RDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_HSI48RDYIE) == (RCC_CIR_HSI48RDYIE)); -} -#endif /* RCC_HSI48_SUPPORT */ - -/** - * @} - */ - -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup RCC_LL_EF_Init De-initialization function - * @{ - */ -ErrorStatus LL_RCC_DeInit(void); -/** - * @} - */ - -/** @defgroup RCC_LL_EF_Get_Freq Get system and peripherals clocks frequency functions - * @{ - */ -void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks); -uint32_t LL_RCC_GetUSARTClockFreq(uint32_t USARTxSource); -uint32_t LL_RCC_GetI2CClockFreq(uint32_t I2CxSource); -#if defined(USB_OTG_FS) || defined(USB) -uint32_t LL_RCC_GetUSBClockFreq(uint32_t USBxSource); -#endif /* USB_OTG_FS || USB */ -#if defined(CEC) -uint32_t LL_RCC_GetCECClockFreq(uint32_t CECxSource); -#endif /* CEC */ -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* RCC */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F0xx_LL_RCC_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit