From 6ab94e0b318884bbcb95e2ea3835f951502e1d99 Mon Sep 17 00:00:00 2001
From: jaseg <git@jaseg.net>
Date: Wed, 14 Oct 2020 12:47:28 +0200
Subject: Move firmware into subdirectory
---
.../STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_pwr.h | 552 ---------------------
1 file changed, 552 deletions(-)
delete mode 100644 hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_pwr.h
(limited to 'hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_pwr.h')
diff --git a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_pwr.h b/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_pwr.h
deleted file mode 100644
index 9a9b423..0000000
--- a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_pwr.h
+++ /dev/null
@@ -1,552 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f0xx_ll_pwr.h
- * @author MCD Application Team
- * @brief Header file of PWR LL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F0xx_LL_PWR_H
-#define __STM32F0xx_LL_PWR_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx.h"
-
-/** @addtogroup STM32F0xx_LL_Driver
- * @{
- */
-
-#if defined(PWR)
-
-/** @defgroup PWR_LL PWR
- * @{
- */
-
-/* Private types -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private constants ---------------------------------------------------------*/
-/* Private macros ------------------------------------------------------------*/
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup PWR_LL_Exported_Constants PWR Exported Constants
- * @{
- */
-
-/** @defgroup PWR_LL_EC_CLEAR_FLAG Clear Flags Defines
- * @brief Flags defines which can be used with LL_PWR_WriteReg function
- * @{
- */
-#define LL_PWR_CR_CSBF PWR_CR_CSBF /*!< Clear standby flag */
-#define LL_PWR_CR_CWUF PWR_CR_CWUF /*!< Clear wakeup flag */
-/**
- * @}
- */
-
-/** @defgroup PWR_LL_EC_GET_FLAG Get Flags Defines
- * @brief Flags defines which can be used with LL_PWR_ReadReg function
- * @{
- */
-#define LL_PWR_CSR_WUF PWR_CSR_WUF /*!< Wakeup flag */
-#define LL_PWR_CSR_SBF PWR_CSR_SBF /*!< Standby flag */
-#if defined(PWR_PVD_SUPPORT)
-#define LL_PWR_CSR_PVDO PWR_CSR_PVDO /*!< Power voltage detector output flag */
-#endif /* PWR_PVD_SUPPORT */
-#if defined(PWR_CSR_VREFINTRDYF)
-#define LL_PWR_CSR_VREFINTRDYF PWR_CSR_VREFINTRDYF /*!< VREFINT ready flag */
-#endif /* PWR_CSR_VREFINTRDYF */
-#define LL_PWR_CSR_EWUP1 PWR_CSR_EWUP1 /*!< Enable WKUP pin 1 */
-#define LL_PWR_CSR_EWUP2 PWR_CSR_EWUP2 /*!< Enable WKUP pin 2 */
-#if defined(PWR_CSR_EWUP3)
-#define LL_PWR_CSR_EWUP3 PWR_CSR_EWUP3 /*!< Enable WKUP pin 3 */
-#endif /* PWR_CSR_EWUP3 */
-#if defined(PWR_CSR_EWUP4)
-#define LL_PWR_CSR_EWUP4 PWR_CSR_EWUP4 /*!< Enable WKUP pin 4 */
-#endif /* PWR_CSR_EWUP4 */
-#if defined(PWR_CSR_EWUP5)
-#define LL_PWR_CSR_EWUP5 PWR_CSR_EWUP5 /*!< Enable WKUP pin 5 */
-#endif /* PWR_CSR_EWUP5 */
-#if defined(PWR_CSR_EWUP6)
-#define LL_PWR_CSR_EWUP6 PWR_CSR_EWUP6 /*!< Enable WKUP pin 6 */
-#endif /* PWR_CSR_EWUP6 */
-#if defined(PWR_CSR_EWUP7)
-#define LL_PWR_CSR_EWUP7 PWR_CSR_EWUP7 /*!< Enable WKUP pin 7 */
-#endif /* PWR_CSR_EWUP7 */
-#if defined(PWR_CSR_EWUP8)
-#define LL_PWR_CSR_EWUP8 PWR_CSR_EWUP8 /*!< Enable WKUP pin 8 */
-#endif /* PWR_CSR_EWUP8 */
-/**
- * @}
- */
-
-
-/** @defgroup PWR_LL_EC_MODE_PWR Mode Power
- * @{
- */
-#define LL_PWR_MODE_STOP_MAINREGU 0x00000000U /*!< Enter Stop mode when the CPU enters deepsleep */
-#define LL_PWR_MODE_STOP_LPREGU (PWR_CR_LPDS) /*!< Enter Stop mode (with low power Regulator ON) when the CPU enters deepsleep */
-#define LL_PWR_MODE_STANDBY (PWR_CR_PDDS) /*!< Enter Standby mode when the CPU enters deepsleep */
-/**
- * @}
- */
-
-#if defined(PWR_CR_LPDS)
-/** @defgroup PWR_LL_EC_REGU_MODE_DS_MODE Regulator Mode In Deep Sleep Mode
- * @{
- */
-#define LL_PWR_REGU_DSMODE_MAIN 0x00000000U /*!< Voltage Regulator in main mode during deepsleep mode */
-#define LL_PWR_REGU_DSMODE_LOW_POWER (PWR_CR_LPDS) /*!< Voltage Regulator in low-power mode during deepsleep mode */
-/**
- * @}
- */
-#endif /* PWR_CR_LPDS */
-
-#if defined(PWR_PVD_SUPPORT)
-/** @defgroup PWR_LL_EC_PVDLEVEL Power Voltage Detector Level
- * @{
- */
-#define LL_PWR_PVDLEVEL_0 (PWR_CR_PLS_LEV0) /*!< Voltage threshold 0 */
-#define LL_PWR_PVDLEVEL_1 (PWR_CR_PLS_LEV1) /*!< Voltage threshold 1 */
-#define LL_PWR_PVDLEVEL_2 (PWR_CR_PLS_LEV2) /*!< Voltage threshold 2 */
-#define LL_PWR_PVDLEVEL_3 (PWR_CR_PLS_LEV3) /*!< Voltage threshold 3 */
-#define LL_PWR_PVDLEVEL_4 (PWR_CR_PLS_LEV4) /*!< Voltage threshold 4 */
-#define LL_PWR_PVDLEVEL_5 (PWR_CR_PLS_LEV5) /*!< Voltage threshold 5 */
-#define LL_PWR_PVDLEVEL_6 (PWR_CR_PLS_LEV6) /*!< Voltage threshold 6 */
-#define LL_PWR_PVDLEVEL_7 (PWR_CR_PLS_LEV7) /*!< Voltage threshold 7 */
-/**
- * @}
- */
-#endif /* PWR_PVD_SUPPORT */
-/** @defgroup PWR_LL_EC_WAKEUP_PIN Wakeup Pins
- * @{
- */
-#define LL_PWR_WAKEUP_PIN1 (PWR_CSR_EWUP1) /*!< WKUP pin 1 : PA0 */
-#define LL_PWR_WAKEUP_PIN2 (PWR_CSR_EWUP2) /*!< WKUP pin 2 : PC13 */
-#if defined(PWR_CSR_EWUP3)
-#define LL_PWR_WAKEUP_PIN3 (PWR_CSR_EWUP3) /*!< WKUP pin 3 : PE6 or PA2 according to device */
-#endif /* PWR_CSR_EWUP3 */
-#if defined(PWR_CSR_EWUP4)
-#define LL_PWR_WAKEUP_PIN4 (PWR_CSR_EWUP4) /*!< WKUP pin 4 : LLG TBD */
-#endif /* PWR_CSR_EWUP4 */
-#if defined(PWR_CSR_EWUP5)
-#define LL_PWR_WAKEUP_PIN5 (PWR_CSR_EWUP5) /*!< WKUP pin 5 : LLG TBD */
-#endif /* PWR_CSR_EWUP5 */
-#if defined(PWR_CSR_EWUP6)
-#define LL_PWR_WAKEUP_PIN6 (PWR_CSR_EWUP6) /*!< WKUP pin 6 : LLG TBD */
-#endif /* PWR_CSR_EWUP6 */
-#if defined(PWR_CSR_EWUP7)
-#define LL_PWR_WAKEUP_PIN7 (PWR_CSR_EWUP7) /*!< WKUP pin 7 : LLG TBD */
-#endif /* PWR_CSR_EWUP7 */
-#if defined(PWR_CSR_EWUP8)
-#define LL_PWR_WAKEUP_PIN8 (PWR_CSR_EWUP8) /*!< WKUP pin 8 : LLG TBD */
-#endif /* PWR_CSR_EWUP8 */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-
-/* Exported macro ------------------------------------------------------------*/
-/** @defgroup PWR_LL_Exported_Macros PWR Exported Macros
- * @{
- */
-
-/** @defgroup PWR_LL_EM_WRITE_READ Common write and read registers Macros
- * @{
- */
-
-/**
- * @brief Write a value in PWR register
- * @param __REG__ Register to be written
- * @param __VALUE__ Value to be written in the register
- * @retval None
- */
-#define LL_PWR_WriteReg(__REG__, __VALUE__) WRITE_REG(PWR->__REG__, (__VALUE__))
-
-/**
- * @brief Read a value in PWR register
- * @param __REG__ Register to be read
- * @retval Register value
- */
-#define LL_PWR_ReadReg(__REG__) READ_REG(PWR->__REG__)
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup PWR_LL_Exported_Functions PWR Exported Functions
- * @{
- */
-
-/** @defgroup PWR_LL_EF_Configuration Configuration
- * @{
- */
-
-/**
- * @brief Enable access to the backup domain
- * @rmtoll CR DBP LL_PWR_EnableBkUpAccess
- * @retval None
- */
-__STATIC_INLINE void LL_PWR_EnableBkUpAccess(void)
-{
- SET_BIT(PWR->CR, PWR_CR_DBP);
-}
-
-/**
- * @brief Disable access to the backup domain
- * @rmtoll CR DBP LL_PWR_DisableBkUpAccess
- * @retval None
- */
-__STATIC_INLINE void LL_PWR_DisableBkUpAccess(void)
-{
- CLEAR_BIT(PWR->CR, PWR_CR_DBP);
-}
-
-/**
- * @brief Check if the backup domain is enabled
- * @rmtoll CR DBP LL_PWR_IsEnabledBkUpAccess
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpAccess(void)
-{
- return (READ_BIT(PWR->CR, PWR_CR_DBP) == (PWR_CR_DBP));
-}
-
-#if defined(PWR_CR_LPDS)
-/**
- * @brief Set voltage Regulator mode during deep sleep mode
- * @rmtoll CR LPDS LL_PWR_SetRegulModeDS
- * @param RegulMode This parameter can be one of the following values:
- * @arg @ref LL_PWR_REGU_DSMODE_MAIN
- * @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER
- * @retval None
- */
-__STATIC_INLINE void LL_PWR_SetRegulModeDS(uint32_t RegulMode)
-{
- MODIFY_REG(PWR->CR, PWR_CR_LPDS, RegulMode);
-}
-
-/**
- * @brief Get voltage Regulator mode during deep sleep mode
- * @rmtoll CR LPDS LL_PWR_GetRegulModeDS
- * @retval Returned value can be one of the following values:
- * @arg @ref LL_PWR_REGU_DSMODE_MAIN
- * @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER
- */
-__STATIC_INLINE uint32_t LL_PWR_GetRegulModeDS(void)
-{
- return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_LPDS));
-}
-#endif /* PWR_CR_LPDS */
-
-/**
- * @brief Set Power Down mode when CPU enters deepsleep
- * @rmtoll CR PDDS LL_PWR_SetPowerMode\n
- * @rmtoll CR LPDS LL_PWR_SetPowerMode
- * @param PDMode This parameter can be one of the following values:
- * @arg @ref LL_PWR_MODE_STOP_MAINREGU
- * @arg @ref LL_PWR_MODE_STOP_LPREGU
- * @arg @ref LL_PWR_MODE_STANDBY
- * @retval None
- */
-__STATIC_INLINE void LL_PWR_SetPowerMode(uint32_t PDMode)
-{
- MODIFY_REG(PWR->CR, (PWR_CR_PDDS| PWR_CR_LPDS), PDMode);
-}
-
-/**
- * @brief Get Power Down mode when CPU enters deepsleep
- * @rmtoll CR PDDS LL_PWR_GetPowerMode\n
- * @rmtoll CR LPDS LL_PWR_GetPowerMode
- * @retval Returned value can be one of the following values:
- * @arg @ref LL_PWR_MODE_STOP_MAINREGU
- * @arg @ref LL_PWR_MODE_STOP_LPREGU
- * @arg @ref LL_PWR_MODE_STANDBY
- */
-__STATIC_INLINE uint32_t LL_PWR_GetPowerMode(void)
-{
- return (uint32_t)(READ_BIT(PWR->CR, (PWR_CR_PDDS| PWR_CR_LPDS)));
-}
-
-#if defined(PWR_PVD_SUPPORT)
-/**
- * @brief Configure the voltage threshold detected by the Power Voltage Detector
- * @rmtoll CR PLS LL_PWR_SetPVDLevel
- * @param PVDLevel This parameter can be one of the following values:
- * @arg @ref LL_PWR_PVDLEVEL_0
- * @arg @ref LL_PWR_PVDLEVEL_1
- * @arg @ref LL_PWR_PVDLEVEL_2
- * @arg @ref LL_PWR_PVDLEVEL_3
- * @arg @ref LL_PWR_PVDLEVEL_4
- * @arg @ref LL_PWR_PVDLEVEL_5
- * @arg @ref LL_PWR_PVDLEVEL_6
- * @arg @ref LL_PWR_PVDLEVEL_7
- * @retval None
- */
-__STATIC_INLINE void LL_PWR_SetPVDLevel(uint32_t PVDLevel)
-{
- MODIFY_REG(PWR->CR, PWR_CR_PLS, PVDLevel);
-}
-
-/**
- * @brief Get the voltage threshold detection
- * @rmtoll CR PLS LL_PWR_GetPVDLevel
- * @retval Returned value can be one of the following values:
- * @arg @ref LL_PWR_PVDLEVEL_0
- * @arg @ref LL_PWR_PVDLEVEL_1
- * @arg @ref LL_PWR_PVDLEVEL_2
- * @arg @ref LL_PWR_PVDLEVEL_3
- * @arg @ref LL_PWR_PVDLEVEL_4
- * @arg @ref LL_PWR_PVDLEVEL_5
- * @arg @ref LL_PWR_PVDLEVEL_6
- * @arg @ref LL_PWR_PVDLEVEL_7
- */
-__STATIC_INLINE uint32_t LL_PWR_GetPVDLevel(void)
-{
- return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_PLS));
-}
-
-/**
- * @brief Enable Power Voltage Detector
- * @rmtoll CR PVDE LL_PWR_EnablePVD
- * @retval None
- */
-__STATIC_INLINE void LL_PWR_EnablePVD(void)
-{
- SET_BIT(PWR->CR, PWR_CR_PVDE);
-}
-
-/**
- * @brief Disable Power Voltage Detector
- * @rmtoll CR PVDE LL_PWR_DisablePVD
- * @retval None
- */
-__STATIC_INLINE void LL_PWR_DisablePVD(void)
-{
- CLEAR_BIT(PWR->CR, PWR_CR_PVDE);
-}
-
-/**
- * @brief Check if Power Voltage Detector is enabled
- * @rmtoll CR PVDE LL_PWR_IsEnabledPVD
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_PWR_IsEnabledPVD(void)
-{
- return (READ_BIT(PWR->CR, PWR_CR_PVDE) == (PWR_CR_PVDE));
-}
-#endif /* PWR_PVD_SUPPORT */
-
-/**
- * @brief Enable the WakeUp PINx functionality
- * @rmtoll CSR EWUP1 LL_PWR_EnableWakeUpPin\n
- * @rmtoll CSR EWUP2 LL_PWR_EnableWakeUpPin\n
- * @rmtoll CSR EWUP3 LL_PWR_EnableWakeUpPin\n
- * @rmtoll CSR EWUP4 LL_PWR_EnableWakeUpPin\n
- * @rmtoll CSR EWUP5 LL_PWR_EnableWakeUpPin\n
- * @rmtoll CSR EWUP6 LL_PWR_EnableWakeUpPin\n
- * @rmtoll CSR EWUP7 LL_PWR_EnableWakeUpPin\n
- * @rmtoll CSR EWUP8 LL_PWR_EnableWakeUpPin
- * @param WakeUpPin This parameter can be one of the following values:
- * @arg @ref LL_PWR_WAKEUP_PIN1
- * @arg @ref LL_PWR_WAKEUP_PIN2
- * @arg @ref LL_PWR_WAKEUP_PIN3 (*)
- * @arg @ref LL_PWR_WAKEUP_PIN4 (*)
- * @arg @ref LL_PWR_WAKEUP_PIN5 (*)
- * @arg @ref LL_PWR_WAKEUP_PIN6 (*)
- * @arg @ref LL_PWR_WAKEUP_PIN7 (*)
- * @arg @ref LL_PWR_WAKEUP_PIN8 (*)
- *
- * (*) not available on all devices
- * @retval None
- */
-__STATIC_INLINE void LL_PWR_EnableWakeUpPin(uint32_t WakeUpPin)
-{
- SET_BIT(PWR->CSR, WakeUpPin);
-}
-
-/**
- * @brief Disable the WakeUp PINx functionality
- * @rmtoll CSR EWUP1 LL_PWR_DisableWakeUpPin\n
- * @rmtoll CSR EWUP2 LL_PWR_DisableWakeUpPin\n
- * @rmtoll CSR EWUP3 LL_PWR_DisableWakeUpPin\n
- * @rmtoll CSR EWUP4 LL_PWR_DisableWakeUpPin\n
- * @rmtoll CSR EWUP5 LL_PWR_DisableWakeUpPin\n
- * @rmtoll CSR EWUP6 LL_PWR_DisableWakeUpPin\n
- * @rmtoll CSR EWUP7 LL_PWR_DisableWakeUpPin\n
- * @rmtoll CSR EWUP8 LL_PWR_DisableWakeUpPin
- * @param WakeUpPin This parameter can be one of the following values:
- * @arg @ref LL_PWR_WAKEUP_PIN1
- * @arg @ref LL_PWR_WAKEUP_PIN2
- * @arg @ref LL_PWR_WAKEUP_PIN3 (*)
- * @arg @ref LL_PWR_WAKEUP_PIN4 (*)
- * @arg @ref LL_PWR_WAKEUP_PIN5 (*)
- * @arg @ref LL_PWR_WAKEUP_PIN6 (*)
- * @arg @ref LL_PWR_WAKEUP_PIN7 (*)
- * @arg @ref LL_PWR_WAKEUP_PIN8 (*)
- *
- * (*) not available on all devices
- * @retval None
- */
-__STATIC_INLINE void LL_PWR_DisableWakeUpPin(uint32_t WakeUpPin)
-{
- CLEAR_BIT(PWR->CSR, WakeUpPin);
-}
-
-/**
- * @brief Check if the WakeUp PINx functionality is enabled
- * @rmtoll CSR EWUP1 LL_PWR_IsEnabledWakeUpPin\n
- * @rmtoll CSR EWUP2 LL_PWR_IsEnabledWakeUpPin\n
- * @rmtoll CSR EWUP3 LL_PWR_IsEnabledWakeUpPin\n
- * @rmtoll CSR EWUP4 LL_PWR_IsEnabledWakeUpPin\n
- * @rmtoll CSR EWUP5 LL_PWR_IsEnabledWakeUpPin\n
- * @rmtoll CSR EWUP6 LL_PWR_IsEnabledWakeUpPin\n
- * @rmtoll CSR EWUP7 LL_PWR_IsEnabledWakeUpPin\n
- * @rmtoll CSR EWUP8 LL_PWR_IsEnabledWakeUpPin
- * @param WakeUpPin This parameter can be one of the following values:
- * @arg @ref LL_PWR_WAKEUP_PIN1
- * @arg @ref LL_PWR_WAKEUP_PIN2
- * @arg @ref LL_PWR_WAKEUP_PIN3 (*)
- * @arg @ref LL_PWR_WAKEUP_PIN4 (*)
- * @arg @ref LL_PWR_WAKEUP_PIN5 (*)
- * @arg @ref LL_PWR_WAKEUP_PIN6 (*)
- * @arg @ref LL_PWR_WAKEUP_PIN7 (*)
- * @arg @ref LL_PWR_WAKEUP_PIN8 (*)
- *
- * (*) not available on all devices
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_PWR_IsEnabledWakeUpPin(uint32_t WakeUpPin)
-{
- return (READ_BIT(PWR->CSR, WakeUpPin) == (WakeUpPin));
-}
-
-
-/**
- * @}
- */
-
-/** @defgroup PWR_LL_EF_FLAG_Management FLAG_Management
- * @{
- */
-
-/**
- * @brief Get Wake-up Flag
- * @rmtoll CSR WUF LL_PWR_IsActiveFlag_WU
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU(void)
-{
- return (READ_BIT(PWR->CSR, PWR_CSR_WUF) == (PWR_CSR_WUF));
-}
-
-/**
- * @brief Get Standby Flag
- * @rmtoll CSR SBF LL_PWR_IsActiveFlag_SB
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_SB(void)
-{
- return (READ_BIT(PWR->CSR, PWR_CSR_SBF) == (PWR_CSR_SBF));
-}
-
-#if defined(PWR_PVD_SUPPORT)
-/**
- * @brief Indicate whether VDD voltage is below the selected PVD threshold
- * @rmtoll CSR PVDO LL_PWR_IsActiveFlag_PVDO
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVDO(void)
-{
- return (READ_BIT(PWR->CSR, PWR_CSR_PVDO) == (PWR_CSR_PVDO));
-}
-#endif /* PWR_PVD_SUPPORT */
-
-#if defined(PWR_CSR_VREFINTRDYF)
-/**
- * @brief Get Internal Reference VrefInt Flag
- * @rmtoll CSR VREFINTRDYF LL_PWR_IsActiveFlag_VREFINTRDY
- * @retval State of bit (1 or 0).
- */
-__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_VREFINTRDY(void)
-{
- return (READ_BIT(PWR->CSR, PWR_CSR_VREFINTRDYF) == (PWR_CSR_VREFINTRDYF));
-}
-#endif /* PWR_CSR_VREFINTRDYF */
-/**
- * @brief Clear Standby Flag
- * @rmtoll CR CSBF LL_PWR_ClearFlag_SB
- * @retval None
- */
-__STATIC_INLINE void LL_PWR_ClearFlag_SB(void)
-{
- SET_BIT(PWR->CR, PWR_CR_CSBF);
-}
-
-/**
- * @brief Clear Wake-up Flags
- * @rmtoll CR CWUF LL_PWR_ClearFlag_WU
- * @retval None
- */
-__STATIC_INLINE void LL_PWR_ClearFlag_WU(void)
-{
- SET_BIT(PWR->CR, PWR_CR_CWUF);
-}
-
-/**
- * @}
- */
-
-#if defined(USE_FULL_LL_DRIVER)
-/** @defgroup PWR_LL_EF_Init De-initialization function
- * @{
- */
-ErrorStatus LL_PWR_DeInit(void);
-/**
- * @}
- */
-#endif /* USE_FULL_LL_DRIVER */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* defined(PWR) */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F0xx_LL_PWR_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--
cgit