From 6ab94e0b318884bbcb95e2ea3835f951502e1d99 Mon Sep 17 00:00:00 2001
From: jaseg <git@jaseg.net>
Date: Wed, 14 Oct 2020 12:47:28 +0200
Subject: Move firmware into subdirectory
---
.../STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h | 189 ---------------------
1 file changed, 189 deletions(-)
delete mode 100644 hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h
(limited to 'hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h')
diff --git a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h b/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h
deleted file mode 100644
index e716606..0000000
--- a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h
+++ /dev/null
@@ -1,189 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f0xx_hal_pwr.h
- * @author MCD Application Team
- * @brief Header file of PWR HAL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F0xx_HAL_PWR_H
-#define __STM32F0xx_HAL_PWR_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_hal_def.h"
-
-/** @addtogroup STM32F0xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup PWR PWR
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/** @defgroup PWR_Exported_Constants PWR Exported Constants
- * @{
- */
-
-/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in STOP mode
- * @{
- */
-#define PWR_MAINREGULATOR_ON (0x00000000U)
-#define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPDS
-
-#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
- ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
-/**
- * @}
- */
-
-/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
- * @{
- */
-#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01U)
-#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02U)
-#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
-/**
- * @}
- */
-
-/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
- * @{
- */
-#define PWR_STOPENTRY_WFI ((uint8_t)0x01U)
-#define PWR_STOPENTRY_WFE ((uint8_t)0x02U)
-#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
-/**
- * @}
- */
-
-
-/**
- * @}
- */
-
-/* Exported macro ------------------------------------------------------------*/
-/** @defgroup PWR_Exported_Macro PWR Exported Macro
- * @{
- */
-
-/** @brief Check PWR flag is set or not.
- * @param __FLAG__ specifies the flag to check.
- * This parameter can be one of the following values:
- * @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event
- * was received from the WKUP pin or from the RTC alarm (Alarm A),
- * RTC Tamper event, RTC TimeStamp event or RTC Wakeup.
- * An additional wakeup event is detected if the WKUP pin is enabled
- * (by setting the EWUP bit) when the WKUP pin level is already high.
- * @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
- * resumed from StandBy mode.
- * @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled
- * by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode
- * For this reason, this bit is equal to 0 after Standby or reset
- * until the PVDE bit is set.
- * Warning: this Flag is not available on STM32F030x8 products
- * @arg PWR_FLAG_VREFINTRDY: This flag indicates that the internal reference
- * voltage VREFINT is ready.
- * Warning: this Flag is not available on STM32F030x8 products
- * @retval The new state of __FLAG__ (TRUE or FALSE).
- */
-#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
-
-/** @brief Clear the PWR's pending flags.
- * @param __FLAG__ specifies the flag to clear.
- * This parameter can be one of the following values:
- * @arg PWR_FLAG_WU: Wake Up flag
- * @arg PWR_FLAG_SB: StandBy flag
- */
-#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR |= (__FLAG__) << 2U)
-
-
-/**
- * @}
- */
-
-/* Include PWR HAL Extension module */
-#include "stm32f0xx_hal_pwr_ex.h"
-
-/* Exported functions --------------------------------------------------------*/
-
-/** @addtogroup PWR_Exported_Functions PWR Exported Functions
- * @{
- */
-
-/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
- * @{
- */
-
-/* Initialization and de-initialization functions *****************************/
-void HAL_PWR_DeInit(void);
-
-/**
- * @}
- */
-
-/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions
- * @{
- */
-
-/* Peripheral Control functions **********************************************/
-void HAL_PWR_EnableBkUpAccess(void);
-void HAL_PWR_DisableBkUpAccess(void);
-
-/* WakeUp pins configuration functions ****************************************/
-void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx);
-void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
-
-/* Low Power modes configuration functions ************************************/
-void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
-void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
-void HAL_PWR_EnterSTANDBYMode(void);
-
-void HAL_PWR_EnableSleepOnExit(void);
-void HAL_PWR_DisableSleepOnExit(void);
-void HAL_PWR_EnableSEVOnPend(void);
-void HAL_PWR_DisableSEVOnPend(void);
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif /* __STM32F0xx_HAL_PWR_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
--
cgit