From 6ab94e0b318884bbcb95e2ea3835f951502e1d99 Mon Sep 17 00:00:00 2001 From: jaseg Date: Wed, 14 Oct 2020 12:47:28 +0200 Subject: Move firmware into subdirectory --- .../STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_comp.h | 700 --------------------- 1 file changed, 700 deletions(-) delete mode 100644 hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_comp.h (limited to 'hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_comp.h') diff --git a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_comp.h b/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_comp.h deleted file mode 100644 index 1c2daac..0000000 --- a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_comp.h +++ /dev/null @@ -1,700 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f0xx_hal_comp.h - * @author MCD Application Team - * @brief Header file of COMP HAL module. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F0xx_HAL_COMP_H -#define STM32F0xx_HAL_COMP_H - -#ifdef __cplusplus - extern "C" { -#endif - -#if defined (COMP1) || defined (COMP2) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f0xx_hal_def.h" - -/** @addtogroup STM32F0xx_HAL_Driver - * @{ - */ - -/** @addtogroup COMP COMP - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup COMP_Exported_Types COMP Exported Types - * @{ - */ - -/** - * @brief COMP Init structure definition - */ -typedef struct -{ - - uint32_t InvertingInput; /*!< Selects the inverting input of the comparator. - This parameter can be a value of @ref COMP_InvertingInput */ - - uint32_t NonInvertingInput; /*!< Selects the non inverting input of the comparator. - This parameter can be a value of @ref COMP_NonInvertingInput */ - - uint32_t Output; /*!< Selects the output redirection of the comparator. - This parameter can be a value of @ref COMP_Output */ - - uint32_t OutputPol; /*!< Selects the output polarity of the comparator. - This parameter can be a value of @ref COMP_OutputPolarity */ - - uint32_t Hysteresis; /*!< Selects the hysteresis voltage of the comparator. - This parameter can be a value of @ref COMP_Hysteresis */ - - uint32_t Mode; /*!< Selects the operating comsumption mode of the comparator - to adjust the speed/consumption. - This parameter can be a value of @ref COMP_Mode */ - - uint32_t WindowMode; /*!< Selects the window mode of the comparator 1 & 2. - This parameter can be a value of @ref COMP_WindowMode */ - - uint32_t TriggerMode; /*!< Selects the trigger mode of the comparator (interrupt mode). - This parameter can be a value of @ref COMP_TriggerMode */ - -}COMP_InitTypeDef; - -/** - * @brief COMP Handle Structure definition - */ -typedef struct __COMP_HandleTypeDef -{ - COMP_TypeDef *Instance; /*!< Register base address */ - COMP_InitTypeDef Init; /*!< COMP required parameters */ - HAL_LockTypeDef Lock; /*!< Locking object */ - __IO uint32_t State; /*!< COMP communication state - This parameter can be a value of @ref COMP_State */ - __IO uint32_t ErrorCode; /*!< COMP Error code */ -#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1) - void (* TriggerCallback)(struct __COMP_HandleTypeDef *hcomp); /*!< COMP trigger callback */ - void (* MspInitCallback)(struct __COMP_HandleTypeDef *hcomp); /*!< COMP Msp Init callback */ - void (* MspDeInitCallback)(struct __COMP_HandleTypeDef *hcomp); /*!< COMP Msp DeInit callback */ -#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */ -}COMP_HandleTypeDef; - -#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1) -/** - * @brief HAL COMP Callback ID enumeration definition - */ -typedef enum -{ - HAL_COMP_TRIGGER_CB_ID = 0x00U, /*!< COMP trigger callback ID */ - HAL_COMP_MSPINIT_CB_ID = 0x01U, /*!< COMP Msp Init callback ID */ - HAL_COMP_MSPDEINIT_CB_ID = 0x02U /*!< COMP Msp DeInit callback ID */ -} HAL_COMP_CallbackIDTypeDef; - -/** - * @brief HAL COMP Callback pointer definition - */ -typedef void (*pCOMP_CallbackTypeDef)(COMP_HandleTypeDef *hcomp); /*!< pointer to a COMP callback function */ - -#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup COMP_Exported_Constants COMP Exported Constants - * @{ - */ - -/** @defgroup COMP_Error_Code COMP Error Code - * @{ - */ -#define HAL_COMP_ERROR_NONE (0x00U) /*!< No error */ -#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1) -#define HAL_COMP_ERROR_INVALID_CALLBACK (0x01U) /*!< Invalid Callback error */ -#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @defgroup COMP_State COMP State - * @{ - */ -#define HAL_COMP_STATE_RESET (0x00000000U) /*!< COMP not yet initialized or disabled */ -#define HAL_COMP_STATE_READY (0x00000001U) /*!< COMP initialized and ready for use */ -#define HAL_COMP_STATE_READY_LOCKED (0x00000011U) /*!< COMP initialized but the configuration is locked */ -#define HAL_COMP_STATE_BUSY (0x00000002U) /*!< COMP is running */ -#define HAL_COMP_STATE_BUSY_LOCKED (0x00000012U) /*!< COMP is running and the configuration is locked */ -/** - * @} - */ - -/** @defgroup COMP_OutputPolarity COMP OutputPolarity - * @{ - */ -#define COMP_OUTPUTPOL_NONINVERTED (0x00000000U) /*!< COMP output on GPIO isn't inverted */ -#define COMP_OUTPUTPOL_INVERTED COMP_CSR_COMP1POL /*!< COMP output on GPIO is inverted */ -/** - * @} - */ - -/** @defgroup COMP_Hysteresis COMP Hysteresis - * @{ - */ -#define COMP_HYSTERESIS_NONE (0x00000000U) /*!< No hysteresis */ -#define COMP_HYSTERESIS_LOW COMP_CSR_COMP1HYST_0 /*!< Hysteresis level low */ -#define COMP_HYSTERESIS_MEDIUM COMP_CSR_COMP1HYST_1 /*!< Hysteresis level medium */ -#define COMP_HYSTERESIS_HIGH COMP_CSR_COMP1HYST /*!< Hysteresis level high */ -/** - * @} - */ - -/** @defgroup COMP_Mode COMP Mode - * @{ - */ -/* Please refer to the electrical characteristics in the device datasheet for - the power consumption values */ -#define COMP_MODE_HIGHSPEED (0x00000000U) /*!< High Speed */ -#define COMP_MODE_MEDIUMSPEED COMP_CSR_COMP1MODE_0 /*!< Medium Speed */ -#define COMP_MODE_LOWPOWER COMP_CSR_COMP1MODE_1 /*!< Low power mode */ -#define COMP_MODE_ULTRALOWPOWER COMP_CSR_COMP1MODE /*!< Ultra-low power mode */ -/** - * @} - */ - -/** @defgroup COMP_InvertingInput COMP InvertingInput - * @{ - */ - -#define COMP_INVERTINGINPUT_1_4VREFINT (0x00000000U) /*!< 1/4 VREFINT connected to comparator inverting input */ -#define COMP_INVERTINGINPUT_1_2VREFINT COMP_CSR_COMP1INSEL_0 /*!< 1/2 VREFINT connected to comparator inverting input */ -#define COMP_INVERTINGINPUT_3_4VREFINT COMP_CSR_COMP1INSEL_1 /*!< 3/4 VREFINT connected to comparator inverting input */ -#define COMP_INVERTINGINPUT_VREFINT (COMP_CSR_COMP1INSEL_1|COMP_CSR_COMP1INSEL_0) /*!< VREFINT connected to comparator inverting input */ -#define COMP_INVERTINGINPUT_DAC1 COMP_CSR_COMP1INSEL_2 /*!< DAC_OUT1 (PA4) connected to comparator inverting input */ -#define COMP_INVERTINGINPUT_DAC1SWITCHCLOSED (COMP_CSR_COMP1INSEL_2|COMP_CSR_COMP1SW1) /*!< DAC_OUT1 (PA4) connected to comparator inverting input - and close switch (PA0 for COMP1 only) */ -#define COMP_INVERTINGINPUT_DAC2 (COMP_CSR_COMP1INSEL_2|COMP_CSR_COMP1INSEL_0) /*!< DAC_OUT2 (PA5) connected to comparator inverting input */ -#define COMP_INVERTINGINPUT_IO1 (COMP_CSR_COMP1INSEL_2|COMP_CSR_COMP1INSEL_1) /*!< IO (PA0 for COMP1 and PA2 for COMP2) connected to comparator inverting input */ -/** - * @} - */ - -/** @defgroup COMP_NonInvertingInput COMP NonInvertingInput - * @{ - */ -#define COMP_NONINVERTINGINPUT_IO1 (0x00000000U) /*!< I/O1 (PA1 for COMP1, PA3 for COMP2) - connected to comparator non inverting input */ -#define COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED COMP_CSR_COMP1SW1 /*!< DAC ouput connected to comparator COMP1 non inverting input */ -/** - * @} - */ - -/** @defgroup COMP_Output COMP Output - * @{ - */ - -/* Output Redirection common for COMP1 and COMP2 */ -#define COMP_OUTPUT_NONE (0x00000000U) /*!< COMP output isn't connected to other peripherals */ -#define COMP_OUTPUT_TIM1BKIN COMP_CSR_COMP1OUTSEL_0 /*!< COMP output connected to TIM1 Break Input (BKIN) */ -#define COMP_OUTPUT_TIM1IC1 COMP_CSR_COMP1OUTSEL_1 /*!< COMP output connected to TIM1 Input Capture 1 */ -#define COMP_OUTPUT_TIM1OCREFCLR (COMP_CSR_COMP1OUTSEL_1|COMP_CSR_COMP1OUTSEL_0) /*!< COMP output connected to TIM1 OCREF Clear */ -#define COMP_OUTPUT_TIM2IC4 COMP_CSR_COMP1OUTSEL_2 /*!< COMP output connected to TIM2 Input Capture 4 */ -#define COMP_OUTPUT_TIM2OCREFCLR (COMP_CSR_COMP1OUTSEL_2|COMP_CSR_COMP1OUTSEL_0) /*!< COMP output connected to TIM2 OCREF Clear */ -#define COMP_OUTPUT_TIM3IC1 (COMP_CSR_COMP1OUTSEL_2|COMP_CSR_COMP1OUTSEL_1) /*!< COMP output connected to TIM3 Input Capture 1 */ -#define COMP_OUTPUT_TIM3OCREFCLR COMP_CSR_COMP1OUTSEL /*!< COMP output connected to TIM3 OCREF Clear */ -/** - * @} - */ - -/** @defgroup COMP_OutputLevel COMP OutputLevel - * @{ - */ -/* When output polarity is not inverted, comparator output is low when - the non-inverting input is at a lower voltage than the inverting input*/ -#define COMP_OUTPUTLEVEL_LOW (0x00000000U) -/* When output polarity is not inverted, comparator output is high when - the non-inverting input is at a higher voltage than the inverting input */ -#define COMP_OUTPUTLEVEL_HIGH COMP_CSR_COMP1OUT -/** - * @} - */ - -/** @defgroup COMP_TriggerMode COMP TriggerMode - * @{ - */ -#define COMP_TRIGGERMODE_NONE (0x00000000U) /*!< No External Interrupt trigger detection */ -#define COMP_TRIGGERMODE_IT_RISING (0x00000001U) /*!< External Interrupt Mode with Rising edge trigger detection */ -#define COMP_TRIGGERMODE_IT_FALLING (0x00000002U) /*!< External Interrupt Mode with Falling edge trigger detection */ -#define COMP_TRIGGERMODE_IT_RISING_FALLING (0x00000003U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ -#define COMP_TRIGGERMODE_EVENT_RISING (0x00000010U) /*!< Event Mode with Rising edge trigger detection */ -#define COMP_TRIGGERMODE_EVENT_FALLING (0x00000020U) /*!< Event Mode with Falling edge trigger detection */ -#define COMP_TRIGGERMODE_EVENT_RISING_FALLING (0x00000030U) /*!< Event Mode with Rising/Falling edge trigger detection */ -/** - * @} - */ - -/** @defgroup COMP_WindowMode COMP WindowMode - * @{ - */ -#define COMP_WINDOWMODE_DISABLE (0x00000000U) /*!< Window mode disabled */ -#define COMP_WINDOWMODE_ENABLE COMP_CSR_WNDWEN /*!< Window mode enabled: non inverting input of comparator 2 - is connected to the non inverting input of comparator 1 (PA1) */ -/** - * @} - */ - -/** @defgroup COMP_Flag COMP Flag - * @{ - */ -#define COMP_FLAG_LOCK ((uint32_t)COMP_CSR_COMPxLOCK) /*!< Lock flag */ - -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup COMP_Exported_Macros COMP Exported Macros - * @{ - */ - -/** @brief Reset COMP handle state - * @param __HANDLE__ COMP handle. - * @retval None - */ -#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1) -#define __HAL_COMP_RESET_HANDLE_STATE(__HANDLE__) do{ \ - (__HANDLE__)->State = HAL_COMP_STATE_RESET; \ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - } while(0) -#else -#define __HAL_COMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_COMP_STATE_RESET) -#endif - -/** - * @brief Clear COMP error code (set it to no error code "HAL_COMP_ERROR_NONE"). - * @param __HANDLE__ COMP handle - * @retval None - */ -#define COMP_CLEAR_ERRORCODE(__HANDLE__) ((__HANDLE__)->ErrorCode = HAL_COMP_ERROR_NONE) - -/** - * @brief Enable the specified comparator. - * @param __HANDLE__ COMP handle. - * @retval None - */ -#define __HAL_COMP_ENABLE(__HANDLE__) (((__HANDLE__)->Instance == COMP1) ? \ - SET_BIT(COMP->CSR, COMP_CSR_COMP1EN) : \ - SET_BIT(COMP->CSR, COMP_CSR_COMP2EN)) - -/** - * @brief Disable the specified comparator. - * @param __HANDLE__ COMP handle. - * @retval None - */ -#define __HAL_COMP_DISABLE(__HANDLE__) (((__HANDLE__)->Instance == COMP1) ? \ - CLEAR_BIT(COMP->CSR, COMP_CSR_COMP1EN) : \ - CLEAR_BIT(COMP->CSR, COMP_CSR_COMP2EN)) - -/** - * @brief Lock the specified comparator configuration. - * @param __HANDLE__ COMP handle. - * @retval None - */ -#define __HAL_COMP_LOCK(__HANDLE__) (((__HANDLE__)->Instance == COMP1) ? \ - SET_BIT(COMP->CSR, COMP_CSR_COMP1LOCK) : \ - SET_BIT(COMP->CSR, COMP_CSR_COMP2LOCK)) - -/** - * @brief Enable the COMP1 EXTI line rising edge trigger. - * @retval None - */ -#define __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, COMP_EXTI_LINE_COMP1) - -/** - * @brief Disable the COMP1 EXTI line rising edge trigger. - * @retval None - */ -#define __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, COMP_EXTI_LINE_COMP1) - -/** - * @brief Enable the COMP1 EXTI line falling edge trigger. - * @retval None - */ -#define __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, COMP_EXTI_LINE_COMP1) - -/** - * @brief Disable the COMP1 EXTI line falling edge trigger. - * @retval None - */ -#define __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, COMP_EXTI_LINE_COMP1) - -/** - * @brief Enable the COMP1 EXTI line rising & falling edge trigger. - * @retval None - */ -#define __HAL_COMP_COMP1_EXTI_ENABLE_RISING_FALLING_EDGE() do { \ - __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE(); \ - __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE(); \ - } while(0) - -/** - * @brief Disable the COMP1 EXTI line rising & falling edge trigger. - * @retval None - */ -#define __HAL_COMP_COMP1_EXTI_DISABLE_RISING_FALLING_EDGE() do { \ - __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE(); \ - __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE(); \ - } while(0) - -/** - * @brief Enable the COMP1 EXTI line in interrupt mode. - * @retval None - */ -#define __HAL_COMP_COMP1_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR, COMP_EXTI_LINE_COMP1) - -/** - * @brief Disable the COMP1 EXTI line in interrupt mode. - * @retval None - */ -#define __HAL_COMP_COMP1_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR, COMP_EXTI_LINE_COMP1) - -/** - * @brief Generate a software interrupt on the COMP1 EXTI line. - * @retval None - */ -#define __HAL_COMP_COMP1_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER, COMP_EXTI_LINE_COMP1) - -/** - * @brief Enable the COMP1 EXTI Line in event mode. - * @retval None - */ -#define __HAL_COMP_COMP1_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR, COMP_EXTI_LINE_COMP1) - -/** - * @brief Disable the COMP1 EXTI Line in event mode. - * @retval None - */ -#define __HAL_COMP_COMP1_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR, COMP_EXTI_LINE_COMP1) - -/** - * @brief Check whether the COMP1 EXTI line flag is set or not. - * @retval RESET or SET - */ -#define __HAL_COMP_COMP1_EXTI_GET_FLAG() READ_BIT(EXTI->PR, COMP_EXTI_LINE_COMP1) - -/** - * @brief Clear the COMP1 EXTI flag. - * @retval None - */ -#define __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR, COMP_EXTI_LINE_COMP1) - -/** - * @brief Enable the COMP2 EXTI line rising edge trigger. - * @retval None - */ -#define __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, COMP_EXTI_LINE_COMP2) - -/** - * @brief Disable the COMP2 EXTI line rising edge trigger. - * @retval None - */ -#define __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, COMP_EXTI_LINE_COMP2) - -/** - * @brief Enable the COMP2 EXTI line falling edge trigger. - * @retval None - */ -#define __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, COMP_EXTI_LINE_COMP2) - -/** - * @brief Disable the COMP2 EXTI line falling edge trigger. - * @retval None - */ -#define __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, COMP_EXTI_LINE_COMP2) - -/** - * @brief Enable the COMP2 EXTI line rising & falling edge trigger. - * @retval None - */ -#define __HAL_COMP_COMP2_EXTI_ENABLE_RISING_FALLING_EDGE() do { \ - __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE(); \ - __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE(); \ - } while(0) - -/** - * @brief Disable the COMP2 EXTI line rising & falling edge trigger. - * @retval None - */ -#define __HAL_COMP_COMP2_EXTI_DISABLE_RISING_FALLING_EDGE() do { \ - __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE(); \ - __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE(); \ - } while(0) - -/** - * @brief Enable the COMP2 EXTI line in interrupt mode. - * @retval None - */ -#define __HAL_COMP_COMP2_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR, COMP_EXTI_LINE_COMP2) - -/** - * @brief Disable the COMP2 EXTI line in interrupt mode. - * @retval None - */ -#define __HAL_COMP_COMP2_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR, COMP_EXTI_LINE_COMP2) - -/** - * @brief Generate a software interrupt on the COMP2 EXTI line. - * @retval None - */ -#define __HAL_COMP_COMP2_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER, COMP_EXTI_LINE_COMP2) - -/** - * @brief Enable the COMP2 EXTI Line in event mode. - * @retval None - */ -#define __HAL_COMP_COMP2_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR, COMP_EXTI_LINE_COMP2) - -/** - * @brief Disable the COMP2 EXTI Line in event mode. - * @retval None - */ -#define __HAL_COMP_COMP2_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR, COMP_EXTI_LINE_COMP2) - -/** - * @brief Check whether the COMP2 EXTI line flag is set or not. - * @retval RESET or SET - */ -#define __HAL_COMP_COMP2_EXTI_GET_FLAG() READ_BIT(EXTI->PR, COMP_EXTI_LINE_COMP2) - -/** - * @brief Clear the COMP2 EXTI flag. - * @retval None - */ -#define __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR, COMP_EXTI_LINE_COMP2) - -/** @brief Check whether the specified COMP flag is set or not. - * @param __HANDLE__ specifies the COMP Handle. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg COMP_FLAG_LOCK: lock flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_COMP_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->CSR & (__FLAG__)) == (__FLAG__)) - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup COMP_Exported_Functions COMP Exported Functions - * @{ - */ -/** @addtogroup COMP_Exported_Functions_Group1 Initialization/de-initialization functions - * @brief Initialization and Configuration functions - * @{ - */ -/* Initialization and de-initialization functions ****************************/ -HAL_StatusTypeDef HAL_COMP_Init(COMP_HandleTypeDef *hcomp); -HAL_StatusTypeDef HAL_COMP_DeInit (COMP_HandleTypeDef *hcomp); -void HAL_COMP_MspInit(COMP_HandleTypeDef *hcomp); -void HAL_COMP_MspDeInit(COMP_HandleTypeDef *hcomp); - -#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1) -/* Callbacks Register/UnRegister functions ***********************************/ -HAL_StatusTypeDef HAL_COMP_RegisterCallback(COMP_HandleTypeDef *hcomp, HAL_COMP_CallbackIDTypeDef CallbackID, pCOMP_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_COMP_UnRegisterCallback(COMP_HandleTypeDef *hcomp, HAL_COMP_CallbackIDTypeDef CallbackID); -#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @addtogroup COMP_Exported_Functions_Group2 I/O operation functions - * @brief Data transfers functions - * @{ - */ -/* IO operation functions *****************************************************/ -HAL_StatusTypeDef HAL_COMP_Start(COMP_HandleTypeDef *hcomp); -HAL_StatusTypeDef HAL_COMP_Stop(COMP_HandleTypeDef *hcomp); -HAL_StatusTypeDef HAL_COMP_Start_IT(COMP_HandleTypeDef *hcomp); -HAL_StatusTypeDef HAL_COMP_Stop_IT(COMP_HandleTypeDef *hcomp); -void HAL_COMP_IRQHandler(COMP_HandleTypeDef *hcomp); -/** - * @} - */ - -/** @addtogroup COMP_Exported_Functions_Group3 Peripheral Control functions - * @brief management functions - * @{ - */ -/* Peripheral Control functions ***********************************************/ -HAL_StatusTypeDef HAL_COMP_Lock(COMP_HandleTypeDef *hcomp); -uint32_t HAL_COMP_GetOutputLevel(COMP_HandleTypeDef *hcomp); - -/* Callback in Interrupt mode */ -void HAL_COMP_TriggerCallback(COMP_HandleTypeDef *hcomp); -/** - * @} - */ - -/** @addtogroup COMP_Exported_Functions_Group4 Peripheral State functions - * @brief Peripheral State functions - * @{ - */ -/* Peripheral State and Error functions ***************************************/ -uint32_t HAL_COMP_GetState(COMP_HandleTypeDef *hcomp); -uint32_t HAL_COMP_GetError(COMP_HandleTypeDef *hcomp); -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup COMP_Private_Constants COMP Private Constants - * @{ - */ -/** @defgroup COMP_ExtiLine COMP EXTI Lines - * Elements values convention: XXXX0000 - * - XXXX : Interrupt mask in the EMR/IMR/RTSR/FTSR register - * @{ - */ -#define COMP_EXTI_LINE_COMP1 ((uint32_t)EXTI_IMR_MR21) /*!< EXTI line 21 connected to COMP1 output */ -#define COMP_EXTI_LINE_COMP2 ((uint32_t)EXTI_IMR_MR22) /*!< EXTI line 22 connected to COMP2 output */ - -/** - * @} - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup COMP_Private_Macros COMP Private Macros - * @{ - */ -/** @defgroup COMP_GET_EXTI_LINE COMP Private macros to get EXTI line associated with Comparators - * @{ - */ -/** - * @brief Get the specified EXTI line for a comparator instance. - * @param __INSTANCE__ specifies the COMP instance. - * @retval value of @ref COMP_ExtiLine - */ -#define COMP_GET_EXTI_LINE(__INSTANCE__) (((__INSTANCE__) == COMP1) ? COMP_EXTI_LINE_COMP1 : \ - COMP_EXTI_LINE_COMP2) -/** - * @} - */ - -/** @defgroup COMP_IS_COMP_Definitions COMP Private macros to check input parameters - * @{ - */ - -#define IS_COMP_OUTPUTPOL(POL) (((POL) == COMP_OUTPUTPOL_NONINVERTED) || \ - ((POL) == COMP_OUTPUTPOL_INVERTED)) - -#define IS_COMP_HYSTERESIS(HYSTERESIS) (((HYSTERESIS) == COMP_HYSTERESIS_NONE) || \ - ((HYSTERESIS) == COMP_HYSTERESIS_LOW) || \ - ((HYSTERESIS) == COMP_HYSTERESIS_MEDIUM) || \ - ((HYSTERESIS) == COMP_HYSTERESIS_HIGH)) - -#define IS_COMP_MODE(MODE) (((MODE) == COMP_MODE_HIGHSPEED) || \ - ((MODE) == COMP_MODE_MEDIUMSPEED) || \ - ((MODE) == COMP_MODE_LOWPOWER) || \ - ((MODE) == COMP_MODE_ULTRALOWPOWER)) - -#define IS_COMP_INVERTINGINPUT(INPUT) (((INPUT) == COMP_INVERTINGINPUT_1_4VREFINT) || \ - ((INPUT) == COMP_INVERTINGINPUT_1_2VREFINT) || \ - ((INPUT) == COMP_INVERTINGINPUT_3_4VREFINT) || \ - ((INPUT) == COMP_INVERTINGINPUT_VREFINT) || \ - ((INPUT) == COMP_INVERTINGINPUT_DAC1) || \ - ((INPUT) == COMP_INVERTINGINPUT_DAC1SWITCHCLOSED) || \ - ((INPUT) == COMP_INVERTINGINPUT_DAC2) || \ - ((INPUT) == COMP_INVERTINGINPUT_IO1)) - -#define IS_COMP_NONINVERTINGINPUT(INPUT) (((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \ - ((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED)) - -#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \ - ((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \ - ((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \ - ((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \ - ((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \ - ((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \ - ((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \ - ((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR)) - -#define IS_COMP_WINDOWMODE(WINDOWMODE) (((WINDOWMODE) == COMP_WINDOWMODE_DISABLE) || \ - ((WINDOWMODE) == COMP_WINDOWMODE_ENABLE)) - -#define IS_COMP_TRIGGERMODE(__MODE__) (((__MODE__) == COMP_TRIGGERMODE_NONE) || \ - ((__MODE__) == COMP_TRIGGERMODE_IT_RISING) || \ - ((__MODE__) == COMP_TRIGGERMODE_IT_FALLING) || \ - ((__MODE__) == COMP_TRIGGERMODE_IT_RISING_FALLING) || \ - ((__MODE__) == COMP_TRIGGERMODE_EVENT_RISING) || \ - ((__MODE__) == COMP_TRIGGERMODE_EVENT_FALLING) || \ - ((__MODE__) == COMP_TRIGGERMODE_EVENT_RISING_FALLING)) -/** - * @} - */ - -/** @defgroup COMP_Lock COMP Lock - * @{ - */ -#define COMP_LOCK_DISABLE (0x00000000U) -#define COMP_LOCK_ENABLE COMP_CSR_COMP1LOCK - -#define COMP_STATE_BIT_LOCK (0x10U) -/** - * @} - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* COMP1 || COMP2 */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32F0xx_HAL_COMP_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - -- cgit