From 6ab94e0b318884bbcb95e2ea3835f951502e1d99 Mon Sep 17 00:00:00 2001 From: jaseg Date: Wed, 14 Oct 2020 12:47:28 +0200 Subject: Move firmware into subdirectory --- hid-dials/Drivers/CMSIS/Include/mpu_armv7.h | 270 ---------------------------- 1 file changed, 270 deletions(-) delete mode 100644 hid-dials/Drivers/CMSIS/Include/mpu_armv7.h (limited to 'hid-dials/Drivers/CMSIS/Include/mpu_armv7.h') diff --git a/hid-dials/Drivers/CMSIS/Include/mpu_armv7.h b/hid-dials/Drivers/CMSIS/Include/mpu_armv7.h deleted file mode 100644 index 7d4b600..0000000 --- a/hid-dials/Drivers/CMSIS/Include/mpu_armv7.h +++ /dev/null @@ -1,270 +0,0 @@ -/****************************************************************************** - * @file mpu_armv7.h - * @brief CMSIS MPU API for Armv7-M MPU - * @version V5.0.4 - * @date 10. January 2018 - ******************************************************************************/ -/* - * Copyright (c) 2017-2018 Arm Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined (__clang__) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef ARM_MPU_ARMV7_H -#define ARM_MPU_ARMV7_H - -#define ARM_MPU_REGION_SIZE_32B ((uint8_t)0x04U) ///!< MPU Region Size 32 Bytes -#define ARM_MPU_REGION_SIZE_64B ((uint8_t)0x05U) ///!< MPU Region Size 64 Bytes -#define ARM_MPU_REGION_SIZE_128B ((uint8_t)0x06U) ///!< MPU Region Size 128 Bytes -#define ARM_MPU_REGION_SIZE_256B ((uint8_t)0x07U) ///!< MPU Region Size 256 Bytes -#define ARM_MPU_REGION_SIZE_512B ((uint8_t)0x08U) ///!< MPU Region Size 512 Bytes -#define ARM_MPU_REGION_SIZE_1KB ((uint8_t)0x09U) ///!< MPU Region Size 1 KByte -#define ARM_MPU_REGION_SIZE_2KB ((uint8_t)0x0AU) ///!< MPU Region Size 2 KBytes -#define ARM_MPU_REGION_SIZE_4KB ((uint8_t)0x0BU) ///!< MPU Region Size 4 KBytes -#define ARM_MPU_REGION_SIZE_8KB ((uint8_t)0x0CU) ///!< MPU Region Size 8 KBytes -#define ARM_MPU_REGION_SIZE_16KB ((uint8_t)0x0DU) ///!< MPU Region Size 16 KBytes -#define ARM_MPU_REGION_SIZE_32KB ((uint8_t)0x0EU) ///!< MPU Region Size 32 KBytes -#define ARM_MPU_REGION_SIZE_64KB ((uint8_t)0x0FU) ///!< MPU Region Size 64 KBytes -#define ARM_MPU_REGION_SIZE_128KB ((uint8_t)0x10U) ///!< MPU Region Size 128 KBytes -#define ARM_MPU_REGION_SIZE_256KB ((uint8_t)0x11U) ///!< MPU Region Size 256 KBytes -#define ARM_MPU_REGION_SIZE_512KB ((uint8_t)0x12U) ///!< MPU Region Size 512 KBytes -#define ARM_MPU_REGION_SIZE_1MB ((uint8_t)0x13U) ///!< MPU Region Size 1 MByte -#define ARM_MPU_REGION_SIZE_2MB ((uint8_t)0x14U) ///!< MPU Region Size 2 MBytes -#define ARM_MPU_REGION_SIZE_4MB ((uint8_t)0x15U) ///!< MPU Region Size 4 MBytes -#define ARM_MPU_REGION_SIZE_8MB ((uint8_t)0x16U) ///!< MPU Region Size 8 MBytes -#define ARM_MPU_REGION_SIZE_16MB ((uint8_t)0x17U) ///!< MPU Region Size 16 MBytes -#define ARM_MPU_REGION_SIZE_32MB ((uint8_t)0x18U) ///!< MPU Region Size 32 MBytes -#define ARM_MPU_REGION_SIZE_64MB ((uint8_t)0x19U) ///!< MPU Region Size 64 MBytes -#define ARM_MPU_REGION_SIZE_128MB ((uint8_t)0x1AU) ///!< MPU Region Size 128 MBytes -#define ARM_MPU_REGION_SIZE_256MB ((uint8_t)0x1BU) ///!< MPU Region Size 256 MBytes -#define ARM_MPU_REGION_SIZE_512MB ((uint8_t)0x1CU) ///!< MPU Region Size 512 MBytes -#define ARM_MPU_REGION_SIZE_1GB ((uint8_t)0x1DU) ///!< MPU Region Size 1 GByte -#define ARM_MPU_REGION_SIZE_2GB ((uint8_t)0x1EU) ///!< MPU Region Size 2 GBytes -#define ARM_MPU_REGION_SIZE_4GB ((uint8_t)0x1FU) ///!< MPU Region Size 4 GBytes - -#define ARM_MPU_AP_NONE 0U ///!< MPU Access Permission no access -#define ARM_MPU_AP_PRIV 1U ///!< MPU Access Permission privileged access only -#define ARM_MPU_AP_URO 2U ///!< MPU Access Permission unprivileged access read-only -#define ARM_MPU_AP_FULL 3U ///!< MPU Access Permission full access -#define ARM_MPU_AP_PRO 5U ///!< MPU Access Permission privileged access read-only -#define ARM_MPU_AP_RO 6U ///!< MPU Access Permission read-only access - -/** MPU Region Base Address Register Value -* -* \param Region The region to be configured, number 0 to 15. -* \param BaseAddress The base address for the region. -*/ -#define ARM_MPU_RBAR(Region, BaseAddress) \ - (((BaseAddress) & MPU_RBAR_ADDR_Msk) | \ - ((Region) & MPU_RBAR_REGION_Msk) | \ - (MPU_RBAR_VALID_Msk)) - -/** -* MPU Memory Access Attributes -* -* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral. -* \param IsShareable Region is shareable between multiple bus masters. -* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache. -* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy. -*/ -#define ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable) \ - ((((TypeExtField ) << MPU_RASR_TEX_Pos) & MPU_RASR_TEX_Msk) | \ - (((IsShareable ) << MPU_RASR_S_Pos) & MPU_RASR_S_Msk) | \ - (((IsCacheable ) << MPU_RASR_C_Pos) & MPU_RASR_C_Msk) | \ - (((IsBufferable ) << MPU_RASR_B_Pos) & MPU_RASR_B_Msk)) - -/** -* MPU Region Attribute and Size Register Value -* -* \param DisableExec Instruction access disable bit, 1= disable instruction fetches. -* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode. -* \param AccessAttributes Memory access attribution, see \ref ARM_MPU_ACCESS_. -* \param SubRegionDisable Sub-region disable field. -* \param Size Region size of the region to be configured, for example 4K, 8K. -*/ -#define ARM_MPU_RASR_EX(DisableExec, AccessPermission, AccessAttributes, SubRegionDisable, Size) \ - ((((DisableExec ) << MPU_RASR_XN_Pos) & MPU_RASR_XN_Msk) | \ - (((AccessPermission) << MPU_RASR_AP_Pos) & MPU_RASR_AP_Msk) | \ - (((AccessAttributes) ) & (MPU_RASR_TEX_Msk | MPU_RASR_S_Msk | MPU_RASR_C_Msk | MPU_RASR_B_Msk))) - -/** -* MPU Region Attribute and Size Register Value -* -* \param DisableExec Instruction access disable bit, 1= disable instruction fetches. -* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode. -* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral. -* \param IsShareable Region is shareable between multiple bus masters. -* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache. -* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy. -* \param SubRegionDisable Sub-region disable field. -* \param Size Region size of the region to be configured, for example 4K, 8K. -*/ -#define ARM_MPU_RASR(DisableExec, AccessPermission, TypeExtField, IsShareable, IsCacheable, IsBufferable, SubRegionDisable, Size) \ - ARM_MPU_RASR_EX(DisableExec, AccessPermission, ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable), SubRegionDisable, Size) - -/** -* MPU Memory Access Attribute for strongly ordered memory. -* - TEX: 000b -* - Shareable -* - Non-cacheable -* - Non-bufferable -*/ -#define ARM_MPU_ACCESS_ORDERED ARM_MPU_ACCESS_(0U, 1U, 0U, 0U) - -/** -* MPU Memory Access Attribute for device memory. -* - TEX: 000b (if non-shareable) or 010b (if shareable) -* - Shareable or non-shareable -* - Non-cacheable -* - Bufferable (if shareable) or non-bufferable (if non-shareable) -* -* \param IsShareable Configures the device memory as shareable or non-shareable. -*/ -#define ARM_MPU_ACCESS_DEVICE(IsShareable) ((IsShareable) ? ARM_MPU_ACCESS_(0U, 1U, 0U, 1U) : ARM_MPU_ACCESS_(2U, 0U, 0U, 0U)) - -/** -* MPU Memory Access Attribute for normal memory. -* - TEX: 1BBb (reflecting outer cacheability rules) -* - Shareable or non-shareable -* - Cacheable or non-cacheable (reflecting inner cacheability rules) -* - Bufferable or non-bufferable (reflecting inner cacheability rules) -* -* \param OuterCp Configures the outer cache policy. -* \param InnerCp Configures the inner cache policy. -* \param IsShareable Configures the memory as shareable or non-shareable. -*/ -#define ARM_MPU_ACCESS_NORMAL(OuterCp, InnerCp, IsShareable) ARM_MPU_ACCESS_((4U | (OuterCp)), IsShareable, ((InnerCp) & 2U), ((InnerCp) & 1U)) - -/** -* MPU Memory Access Attribute non-cacheable policy. -*/ -#define ARM_MPU_CACHEP_NOCACHE 0U - -/** -* MPU Memory Access Attribute write-back, write and read allocate policy. -*/ -#define ARM_MPU_CACHEP_WB_WRA 1U - -/** -* MPU Memory Access Attribute write-through, no write allocate policy. -*/ -#define ARM_MPU_CACHEP_WT_NWA 2U - -/** -* MPU Memory Access Attribute write-back, no write allocate policy. -*/ -#define ARM_MPU_CACHEP_WB_NWA 3U - - -/** -* Struct for a single MPU Region -*/ -typedef struct { - uint32_t RBAR; //!< The region base address register value (RBAR) - uint32_t RASR; //!< The region attribute and size register value (RASR) \ref MPU_RASR -} ARM_MPU_Region_t; - -/** Enable the MPU. -* \param MPU_Control Default access permissions for unconfigured regions. -*/ -__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control) -{ - __DSB(); - __ISB(); - MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; -#ifdef SCB_SHCSR_MEMFAULTENA_Msk - SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; -#endif -} - -/** Disable the MPU. -*/ -__STATIC_INLINE void ARM_MPU_Disable(void) -{ - __DSB(); - __ISB(); -#ifdef SCB_SHCSR_MEMFAULTENA_Msk - SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; -#endif - MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk; -} - -/** Clear and disable the given MPU region. -* \param rnr Region number to be cleared. -*/ -__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr) -{ - MPU->RNR = rnr; - MPU->RASR = 0U; -} - -/** Configure an MPU region. -* \param rbar Value for RBAR register. -* \param rsar Value for RSAR register. -*/ -__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rbar, uint32_t rasr) -{ - MPU->RBAR = rbar; - MPU->RASR = rasr; -} - -/** Configure the given MPU region. -* \param rnr Region number to be configured. -* \param rbar Value for RBAR register. -* \param rsar Value for RSAR register. -*/ -__STATIC_INLINE void ARM_MPU_SetRegionEx(uint32_t rnr, uint32_t rbar, uint32_t rasr) -{ - MPU->RNR = rnr; - MPU->RBAR = rbar; - MPU->RASR = rasr; -} - -/** Memcopy with strictly ordered memory access, e.g. for register targets. -* \param dst Destination data is copied to. -* \param src Source data is copied from. -* \param len Amount of data words to be copied. -*/ -__STATIC_INLINE void orderedCpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) -{ - uint32_t i; - for (i = 0U; i < len; ++i) - { - dst[i] = src[i]; - } -} - -/** Load the given number of MPU regions from a table. -* \param table Pointer to the MPU configuration table. -* \param cnt Amount of regions to be configured. -*/ -__STATIC_INLINE void ARM_MPU_Load(ARM_MPU_Region_t const* table, uint32_t cnt) -{ - const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U; - while (cnt > MPU_TYPE_RALIASES) { - orderedCpy(&(MPU->RBAR), &(table->RBAR), MPU_TYPE_RALIASES*rowWordSize); - table += MPU_TYPE_RALIASES; - cnt -= MPU_TYPE_RALIASES; - } - orderedCpy(&(MPU->RBAR), &(table->RBAR), cnt*rowWordSize); -} - -#endif -- cgit