From 6ab94e0b318884bbcb95e2ea3835f951502e1d99 Mon Sep 17 00:00:00 2001
From: jaseg <git@jaseg.net>
Date: Wed, 14 Oct 2020 12:47:28 +0200
Subject: Move firmware into subdirectory

---
 .../Source/ControllerFunctions/arm_pid_init_q31.c  | 95 ----------------------
 1 file changed, 95 deletions(-)
 delete mode 100644 hid-dials/Drivers/CMSIS/DSP/Source/ControllerFunctions/arm_pid_init_q31.c

(limited to 'hid-dials/Drivers/CMSIS/DSP/Source/ControllerFunctions/arm_pid_init_q31.c')

diff --git a/hid-dials/Drivers/CMSIS/DSP/Source/ControllerFunctions/arm_pid_init_q31.c b/hid-dials/Drivers/CMSIS/DSP/Source/ControllerFunctions/arm_pid_init_q31.c
deleted file mode 100644
index ce2936e..0000000
--- a/hid-dials/Drivers/CMSIS/DSP/Source/ControllerFunctions/arm_pid_init_q31.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/* ----------------------------------------------------------------------
- * Project:      CMSIS DSP Library
- * Title:        arm_pid_init_q31.c
- * Description:  Q31 PID Control initialization function
- *
- * $Date:        27. January 2017
- * $Revision:    V.1.5.1
- *
- * Target Processor: Cortex-M cores
- * -------------------------------------------------------------------- */
-/*
- * Copyright (C) 2010-2017 ARM Limited or its affiliates. All rights reserved.
- *
- * SPDX-License-Identifier: Apache-2.0
- *
- * Licensed under the Apache License, Version 2.0 (the License); you may
- * not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an AS IS BASIS, WITHOUT
- * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#include "arm_math.h"
-
- /**
- * @addtogroup PID
- * @{
- */
-
-/**
- * @brief  Initialization function for the Q31 PID Control.
- * @param[in,out] *S points to an instance of the Q31 PID structure.
- * @param[in]     resetStateFlag  flag to reset the state. 0 = no change in state 1 = reset the state.
- * @return none.
- * \par Description:
- * \par
- * The <code>resetStateFlag</code> specifies whether to set state to zero or not. \n
- * The function computes the structure fields: <code>A0</code>, <code>A1</code> <code>A2</code>
- * using the proportional gain( \c Kp), integral gain( \c Ki) and derivative gain( \c Kd)
- * also sets the state variables to all zeros.
- */
-
-void arm_pid_init_q31(
-  arm_pid_instance_q31 * S,
-  int32_t resetStateFlag)
-{
-
-#if defined (ARM_MATH_DSP)
-
-  /* Run the below code for Cortex-M4 and Cortex-M3 */
-
-  /* Derived coefficient A0 */
-  S->A0 = __QADD(__QADD(S->Kp, S->Ki), S->Kd);
-
-  /* Derived coefficient A1 */
-  S->A1 = -__QADD(__QADD(S->Kd, S->Kd), S->Kp);
-
-
-#else
-
-  /* Run the below code for Cortex-M0 */
-
-  q31_t temp;
-
-  /* Derived coefficient A0 */
-  temp = clip_q63_to_q31((q63_t) S->Kp + S->Ki);
-  S->A0 = clip_q63_to_q31((q63_t) temp + S->Kd);
-
-  /* Derived coefficient A1 */
-  temp = clip_q63_to_q31((q63_t) S->Kd + S->Kd);
-  S->A1 = -clip_q63_to_q31((q63_t) temp + S->Kp);
-
-#endif /* #if defined (ARM_MATH_DSP) */
-
-  /* Derived coefficient A2 */
-  S->A2 = S->Kd;
-
-  /* Check whether state needs reset or not */
-  if (resetStateFlag)
-  {
-    /* Clear the state buffer.  The size will be always 3 samples */
-    memset(S->state, 0, 3U * sizeof(q31_t));
-  }
-
-}
-
-/**
- * @} end of PID group
- */
-- 
cgit