From 6ab94e0b318884bbcb95e2ea3835f951502e1d99 Mon Sep 17 00:00:00 2001 From: jaseg Date: Wed, 14 Oct 2020 12:47:28 +0200 Subject: Move firmware into subdirectory --- .../DSP/Source/SupportFunctions/arm_q31_to_q7.c | 124 +++++++++++++++++++++ 1 file changed, 124 insertions(+) create mode 100644 fw/midi-dials/Drivers/CMSIS/DSP/Source/SupportFunctions/arm_q31_to_q7.c (limited to 'fw/midi-dials/Drivers/CMSIS/DSP/Source/SupportFunctions/arm_q31_to_q7.c') diff --git a/fw/midi-dials/Drivers/CMSIS/DSP/Source/SupportFunctions/arm_q31_to_q7.c b/fw/midi-dials/Drivers/CMSIS/DSP/Source/SupportFunctions/arm_q31_to_q7.c new file mode 100644 index 0000000..6586861 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/DSP/Source/SupportFunctions/arm_q31_to_q7.c @@ -0,0 +1,124 @@ +/* ---------------------------------------------------------------------- + * Project: CMSIS DSP Library + * Title: arm_q31_to_q7.c + * Description: Converts the elements of the Q31 vector to Q7 vector + * + * $Date: 27. January 2017 + * $Revision: V.1.5.1 + * + * Target Processor: Cortex-M cores + * -------------------------------------------------------------------- */ +/* + * Copyright (C) 2010-2017 ARM Limited or its affiliates. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#include "arm_math.h" + +/** + * @ingroup groupSupport + */ + +/** + * @addtogroup q31_to_x + * @{ + */ + +/** + * @brief Converts the elements of the Q31 vector to Q7 vector. + * @param[in] *pSrc points to the Q31 input vector + * @param[out] *pDst points to the Q7 output vector + * @param[in] blockSize length of the input vector + * @return none. + * + * \par Description: + * + * The equation used for the conversion process is: + * + *
+ * 	pDst[n] = (q7_t) pSrc[n] >> 24;   0 <= n < blockSize.
+ * 
+ * + */ + + +void arm_q31_to_q7( + q31_t * pSrc, + q7_t * pDst, + uint32_t blockSize) +{ + q31_t *pIn = pSrc; /* Src pointer */ + uint32_t blkCnt; /* loop counter */ + +#if defined (ARM_MATH_DSP) + + /* Run the below code for Cortex-M4 and Cortex-M3 */ + q31_t in1, in2, in3, in4; + q7_t out1, out2, out3, out4; + + /*loop Unrolling */ + blkCnt = blockSize >> 2U; + + /* First part of the processing with loop unrolling. Compute 4 outputs at a time. + ** a second loop below computes the remaining 1 to 3 samples. */ + while (blkCnt > 0U) + { + /* C = (q7_t) A >> 24 */ + /* convert from q31 to q7 and then store the results in the destination buffer */ + in1 = *pIn++; + in2 = *pIn++; + in3 = *pIn++; + in4 = *pIn++; + + out1 = (q7_t) (in1 >> 24); + out2 = (q7_t) (in2 >> 24); + out3 = (q7_t) (in3 >> 24); + out4 = (q7_t) (in4 >> 24); + + *__SIMD32(pDst)++ = __PACKq7(out1, out2, out3, out4); + + /* Decrement the loop counter */ + blkCnt--; + } + + /* If the blockSize is not a multiple of 4, compute any remaining output samples here. + ** No loop unrolling is used. */ + blkCnt = blockSize % 0x4U; + +#else + + /* Run the below code for Cortex-M0 */ + + /* Loop over blockSize number of values */ + blkCnt = blockSize; + +#endif /* #if defined (ARM_MATH_DSP) */ + + while (blkCnt > 0U) + { + /* C = (q7_t) A >> 24 */ + /* convert from q31 to q7 and then store the results in the destination buffer */ + *pDst++ = (q7_t) (*pIn++ >> 24); + + /* Decrement the loop counter */ + blkCnt--; + } + +} + +/** + * @} end of q31_to_x group + */ -- cgit