From 6ab94e0b318884bbcb95e2ea3835f951502e1d99 Mon Sep 17 00:00:00 2001 From: jaseg Date: Wed, 14 Oct 2020 12:47:28 +0200 Subject: Move firmware into subdirectory --- .../Source/FilteringFunctions/arm_fir_sparse_q7.c | 469 +++++++++++++++++++++ 1 file changed, 469 insertions(+) create mode 100644 fw/midi-dials/Drivers/CMSIS/DSP/Source/FilteringFunctions/arm_fir_sparse_q7.c (limited to 'fw/midi-dials/Drivers/CMSIS/DSP/Source/FilteringFunctions/arm_fir_sparse_q7.c') diff --git a/fw/midi-dials/Drivers/CMSIS/DSP/Source/FilteringFunctions/arm_fir_sparse_q7.c b/fw/midi-dials/Drivers/CMSIS/DSP/Source/FilteringFunctions/arm_fir_sparse_q7.c new file mode 100644 index 0000000..252ba95 --- /dev/null +++ b/fw/midi-dials/Drivers/CMSIS/DSP/Source/FilteringFunctions/arm_fir_sparse_q7.c @@ -0,0 +1,469 @@ +/* ---------------------------------------------------------------------- + * Project: CMSIS DSP Library + * Title: arm_fir_sparse_q7.c + * Description: Q7 sparse FIR filter processing function + * + * $Date: 27. January 2017 + * $Revision: V.1.5.1 + * + * Target Processor: Cortex-M cores + * -------------------------------------------------------------------- */ +/* + * Copyright (C) 2010-2017 ARM Limited or its affiliates. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#include "arm_math.h" + + +/** + * @ingroup groupFilters + */ + +/** + * @addtogroup FIR_Sparse + * @{ + */ + + +/** + * @brief Processing function for the Q7 sparse FIR filter. + * @param[in] *S points to an instance of the Q7 sparse FIR structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data + * @param[in] *pScratchIn points to a temporary buffer of size blockSize. + * @param[in] *pScratchOut points to a temporary buffer of size blockSize. + * @param[in] blockSize number of input samples to process per call. + * @return none. + * + * Scaling and Overflow Behavior: + * \par + * The function is implemented using a 32-bit internal accumulator. + * Both coefficients and state variables are represented in 1.7 format and multiplications yield a 2.14 result. + * The 2.14 intermediate results are accumulated in a 32-bit accumulator in 18.14 format. + * There is no risk of internal overflow with this approach and the full precision of intermediate multiplications is preserved. + * The accumulator is then converted to 18.7 format by discarding the low 7 bits. + * Finally, the result is truncated to 1.7 format. + */ + +void arm_fir_sparse_q7( + arm_fir_sparse_instance_q7 * S, + q7_t * pSrc, + q7_t * pDst, + q7_t * pScratchIn, + q31_t * pScratchOut, + uint32_t blockSize) +{ + + q7_t *pState = S->pState; /* State pointer */ + q7_t *pCoeffs = S->pCoeffs; /* Coefficient pointer */ + q7_t *px; /* Scratch buffer pointer */ + q7_t *py = pState; /* Temporary pointers for state buffer */ + q7_t *pb = pScratchIn; /* Temporary pointers for scratch buffer */ + q7_t *pOut = pDst; /* Destination pointer */ + int32_t *pTapDelay = S->pTapDelay; /* Pointer to the array containing offset of the non-zero tap values. */ + uint32_t delaySize = S->maxDelay + blockSize; /* state length */ + uint16_t numTaps = S->numTaps; /* Filter order */ + int32_t readIndex; /* Read index of the state buffer */ + uint32_t tapCnt, blkCnt; /* loop counters */ + q7_t coeff = *pCoeffs++; /* Read the coefficient value */ + q31_t *pScr2 = pScratchOut; /* Working pointer for scratch buffer of output values */ + q31_t in; + + +#if defined (ARM_MATH_DSP) + + /* Run the below code for Cortex-M4 and Cortex-M3 */ + + q7_t in1, in2, in3, in4; + + /* BlockSize of Input samples are copied into the state buffer */ + /* StateIndex points to the starting position to write in the state buffer */ + arm_circularWrite_q7(py, (int32_t) delaySize, &S->stateIndex, 1, pSrc, 1, + blockSize); + + /* Loop over the number of taps. */ + tapCnt = numTaps; + + /* Read Index, from where the state buffer should be read, is calculated. */ + readIndex = ((int32_t) S->stateIndex - (int32_t) blockSize) - *pTapDelay++; + + /* Wraparound of readIndex */ + if (readIndex < 0) + { + readIndex += (int32_t) delaySize; + } + + /* Working pointer for state buffer is updated */ + py = pState; + + /* blockSize samples are read from the state buffer */ + arm_circularRead_q7(py, (int32_t) delaySize, &readIndex, 1, pb, pb, + (int32_t) blockSize, 1, blockSize); + + /* Working pointer for the scratch buffer of state values */ + px = pb; + + /* Working pointer for scratch buffer of output values */ + pScratchOut = pScr2; + + /* Loop over the blockSize. Unroll by a factor of 4. + * Compute 4 multiplications at a time. */ + blkCnt = blockSize >> 2; + + while (blkCnt > 0U) + { + /* Perform multiplication and store in the scratch buffer */ + *pScratchOut++ = ((q31_t) * px++ * coeff); + *pScratchOut++ = ((q31_t) * px++ * coeff); + *pScratchOut++ = ((q31_t) * px++ * coeff); + *pScratchOut++ = ((q31_t) * px++ * coeff); + + /* Decrement the loop counter */ + blkCnt--; + } + + /* If the blockSize is not a multiple of 4, + * compute the remaining samples */ + blkCnt = blockSize % 0x4U; + + while (blkCnt > 0U) + { + /* Perform multiplication and store in the scratch buffer */ + *pScratchOut++ = ((q31_t) * px++ * coeff); + + /* Decrement the loop counter */ + blkCnt--; + } + + /* Load the coefficient value and + * increment the coefficient buffer for the next set of state values */ + coeff = *pCoeffs++; + + /* Read Index, from where the state buffer should be read, is calculated. */ + readIndex = ((int32_t) S->stateIndex - (int32_t) blockSize) - *pTapDelay++; + + /* Wraparound of readIndex */ + if (readIndex < 0) + { + readIndex += (int32_t) delaySize; + } + + /* Loop over the number of taps. */ + tapCnt = (uint32_t) numTaps - 2U; + + while (tapCnt > 0U) + { + /* Working pointer for state buffer is updated */ + py = pState; + + /* blockSize samples are read from the state buffer */ + arm_circularRead_q7(py, (int32_t) delaySize, &readIndex, 1, pb, pb, + (int32_t) blockSize, 1, blockSize); + + /* Working pointer for the scratch buffer of state values */ + px = pb; + + /* Working pointer for scratch buffer of output values */ + pScratchOut = pScr2; + + /* Loop over the blockSize. Unroll by a factor of 4. + * Compute 4 MACS at a time. */ + blkCnt = blockSize >> 2; + + while (blkCnt > 0U) + { + /* Perform Multiply-Accumulate */ + in = *pScratchOut + ((q31_t) * px++ * coeff); + *pScratchOut++ = in; + in = *pScratchOut + ((q31_t) * px++ * coeff); + *pScratchOut++ = in; + in = *pScratchOut + ((q31_t) * px++ * coeff); + *pScratchOut++ = in; + in = *pScratchOut + ((q31_t) * px++ * coeff); + *pScratchOut++ = in; + + /* Decrement the loop counter */ + blkCnt--; + } + + /* If the blockSize is not a multiple of 4, + * compute the remaining samples */ + blkCnt = blockSize % 0x4U; + + while (blkCnt > 0U) + { + /* Perform Multiply-Accumulate */ + in = *pScratchOut + ((q31_t) * px++ * coeff); + *pScratchOut++ = in; + + /* Decrement the loop counter */ + blkCnt--; + } + + /* Load the coefficient value and + * increment the coefficient buffer for the next set of state values */ + coeff = *pCoeffs++; + + /* Read Index, from where the state buffer should be read, is calculated. */ + readIndex = ((int32_t) S->stateIndex - + (int32_t) blockSize) - *pTapDelay++; + + /* Wraparound of readIndex */ + if (readIndex < 0) + { + readIndex += (int32_t) delaySize; + } + + /* Decrement the tap loop counter */ + tapCnt--; + } + + /* Compute last tap without the final read of pTapDelay */ + + /* Working pointer for state buffer is updated */ + py = pState; + + /* blockSize samples are read from the state buffer */ + arm_circularRead_q7(py, (int32_t) delaySize, &readIndex, 1, pb, pb, + (int32_t) blockSize, 1, blockSize); + + /* Working pointer for the scratch buffer of state values */ + px = pb; + + /* Working pointer for scratch buffer of output values */ + pScratchOut = pScr2; + + /* Loop over the blockSize. Unroll by a factor of 4. + * Compute 4 MACS at a time. */ + blkCnt = blockSize >> 2; + + while (blkCnt > 0U) + { + /* Perform Multiply-Accumulate */ + in = *pScratchOut + ((q31_t) * px++ * coeff); + *pScratchOut++ = in; + in = *pScratchOut + ((q31_t) * px++ * coeff); + *pScratchOut++ = in; + in = *pScratchOut + ((q31_t) * px++ * coeff); + *pScratchOut++ = in; + in = *pScratchOut + ((q31_t) * px++ * coeff); + *pScratchOut++ = in; + + /* Decrement the loop counter */ + blkCnt--; + } + + /* If the blockSize is not a multiple of 4, + * compute the remaining samples */ + blkCnt = blockSize % 0x4U; + + while (blkCnt > 0U) + { + /* Perform Multiply-Accumulate */ + in = *pScratchOut + ((q31_t) * px++ * coeff); + *pScratchOut++ = in; + + /* Decrement the loop counter */ + blkCnt--; + } + + /* All the output values are in pScratchOut buffer. + Convert them into 1.15 format, saturate and store in the destination buffer. */ + /* Loop over the blockSize. */ + blkCnt = blockSize >> 2; + + while (blkCnt > 0U) + { + in1 = (q7_t) __SSAT(*pScr2++ >> 7, 8); + in2 = (q7_t) __SSAT(*pScr2++ >> 7, 8); + in3 = (q7_t) __SSAT(*pScr2++ >> 7, 8); + in4 = (q7_t) __SSAT(*pScr2++ >> 7, 8); + + *__SIMD32(pOut)++ = __PACKq7(in1, in2, in3, in4); + + /* Decrement the blockSize loop counter */ + blkCnt--; + } + + /* If the blockSize is not a multiple of 4, + remaining samples are processed in the below loop */ + blkCnt = blockSize % 0x4U; + + while (blkCnt > 0U) + { + *pOut++ = (q7_t) __SSAT(*pScr2++ >> 7, 8); + + /* Decrement the blockSize loop counter */ + blkCnt--; + } + +#else + + /* Run the below code for Cortex-M0 */ + + /* BlockSize of Input samples are copied into the state buffer */ + /* StateIndex points to the starting position to write in the state buffer */ + arm_circularWrite_q7(py, (int32_t) delaySize, &S->stateIndex, 1, pSrc, 1, + blockSize); + + /* Loop over the number of taps. */ + tapCnt = numTaps; + + /* Read Index, from where the state buffer should be read, is calculated. */ + readIndex = ((int32_t) S->stateIndex - (int32_t) blockSize) - *pTapDelay++; + + /* Wraparound of readIndex */ + if (readIndex < 0) + { + readIndex += (int32_t) delaySize; + } + + /* Working pointer for state buffer is updated */ + py = pState; + + /* blockSize samples are read from the state buffer */ + arm_circularRead_q7(py, (int32_t) delaySize, &readIndex, 1, pb, pb, + (int32_t) blockSize, 1, blockSize); + + /* Working pointer for the scratch buffer of state values */ + px = pb; + + /* Working pointer for scratch buffer of output values */ + pScratchOut = pScr2; + + /* Loop over the blockSize */ + blkCnt = blockSize; + + while (blkCnt > 0U) + { + /* Perform multiplication and store in the scratch buffer */ + *pScratchOut++ = ((q31_t) * px++ * coeff); + + /* Decrement the loop counter */ + blkCnt--; + } + + /* Load the coefficient value and + * increment the coefficient buffer for the next set of state values */ + coeff = *pCoeffs++; + + /* Read Index, from where the state buffer should be read, is calculated. */ + readIndex = ((int32_t) S->stateIndex - (int32_t) blockSize) - *pTapDelay++; + + /* Wraparound of readIndex */ + if (readIndex < 0) + { + readIndex += (int32_t) delaySize; + } + + /* Loop over the number of taps. */ + tapCnt = (uint32_t) numTaps - 2U; + + while (tapCnt > 0U) + { + /* Working pointer for state buffer is updated */ + py = pState; + + /* blockSize samples are read from the state buffer */ + arm_circularRead_q7(py, (int32_t) delaySize, &readIndex, 1, pb, pb, + (int32_t) blockSize, 1, blockSize); + + /* Working pointer for the scratch buffer of state values */ + px = pb; + + /* Working pointer for scratch buffer of output values */ + pScratchOut = pScr2; + + /* Loop over the blockSize */ + blkCnt = blockSize; + + while (blkCnt > 0U) + { + /* Perform Multiply-Accumulate */ + in = *pScratchOut + ((q31_t) * px++ * coeff); + *pScratchOut++ = in; + + /* Decrement the loop counter */ + blkCnt--; + } + + /* Load the coefficient value and + * increment the coefficient buffer for the next set of state values */ + coeff = *pCoeffs++; + + /* Read Index, from where the state buffer should be read, is calculated. */ + readIndex = + ((int32_t) S->stateIndex - (int32_t) blockSize) - *pTapDelay++; + + /* Wraparound of readIndex */ + if (readIndex < 0) + { + readIndex += (int32_t) delaySize; + } + + /* Decrement the tap loop counter */ + tapCnt--; + } + + /* Compute last tap without the final read of pTapDelay */ + + /* Working pointer for state buffer is updated */ + py = pState; + + /* blockSize samples are read from the state buffer */ + arm_circularRead_q7(py, (int32_t) delaySize, &readIndex, 1, pb, pb, + (int32_t) blockSize, 1, blockSize); + + /* Working pointer for the scratch buffer of state values */ + px = pb; + + /* Working pointer for scratch buffer of output values */ + pScratchOut = pScr2; + + /* Loop over the blockSize */ + blkCnt = blockSize; + + while (blkCnt > 0U) + { + /* Perform Multiply-Accumulate */ + in = *pScratchOut + ((q31_t) * px++ * coeff); + *pScratchOut++ = in; + + /* Decrement the loop counter */ + blkCnt--; + } + + /* All the output values are in pScratchOut buffer. + Convert them into 1.15 format, saturate and store in the destination buffer. */ + /* Loop over the blockSize. */ + blkCnt = blockSize; + + while (blkCnt > 0U) + { + *pOut++ = (q7_t) __SSAT(*pScr2++ >> 7, 8); + + /* Decrement the blockSize loop counter */ + blkCnt--; + } + +#endif /* #if defined (ARM_MATH_DSP) */ + +} + +/** + * @} end of FIR_Sparse group + */ -- cgit