From 6ab94e0b318884bbcb95e2ea3835f951502e1d99 Mon Sep 17 00:00:00 2001
From: jaseg <git@jaseg.net>
Date: Wed, 14 Oct 2020 12:47:28 +0200
Subject: Move firmware into subdirectory

---
 .../DSP/Source/BasicMathFunctions/arm_sub_q7.c     | 119 +++++++++++++++++++++
 1 file changed, 119 insertions(+)
 create mode 100644 fw/midi-dials/Drivers/CMSIS/DSP/Source/BasicMathFunctions/arm_sub_q7.c

(limited to 'fw/midi-dials/Drivers/CMSIS/DSP/Source/BasicMathFunctions/arm_sub_q7.c')

diff --git a/fw/midi-dials/Drivers/CMSIS/DSP/Source/BasicMathFunctions/arm_sub_q7.c b/fw/midi-dials/Drivers/CMSIS/DSP/Source/BasicMathFunctions/arm_sub_q7.c
new file mode 100644
index 0000000..8f8e111
--- /dev/null
+++ b/fw/midi-dials/Drivers/CMSIS/DSP/Source/BasicMathFunctions/arm_sub_q7.c
@@ -0,0 +1,119 @@
+/* ----------------------------------------------------------------------
+ * Project:      CMSIS DSP Library
+ * Title:        arm_sub_q7.c
+ * Description:  Q7 vector subtraction
+ *
+ * $Date:        27. January 2017
+ * $Revision:    V.1.5.1
+ *
+ * Target Processor: Cortex-M cores
+ * -------------------------------------------------------------------- */
+/*
+ * Copyright (C) 2010-2017 ARM Limited or its affiliates. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "arm_math.h"
+
+/**
+ * @ingroup groupMath
+ */
+
+/**
+ * @addtogroup BasicSub
+ * @{
+ */
+
+/**
+ * @brief Q7 vector subtraction.
+ * @param[in]       *pSrcA points to the first input vector
+ * @param[in]       *pSrcB points to the second input vector
+ * @param[out]      *pDst points to the output vector
+ * @param[in]       blockSize number of samples in each vector
+ * @return none.
+ *
+ * <b>Scaling and Overflow Behavior:</b>
+ * \par
+ * The function uses saturating arithmetic.
+ * Results outside of the allowable Q7 range [0x80 0x7F] will be saturated.
+ */
+
+void arm_sub_q7(
+  q7_t * pSrcA,
+  q7_t * pSrcB,
+  q7_t * pDst,
+  uint32_t blockSize)
+{
+  uint32_t blkCnt;                               /* loop counter */
+
+#if defined (ARM_MATH_DSP)
+
+/* Run the below code for Cortex-M4 and Cortex-M3 */
+
+  /*loop Unrolling */
+  blkCnt = blockSize >> 2U;
+
+  /* First part of the processing with loop unrolling.  Compute 4 outputs at a time.
+   ** a second loop below computes the remaining 1 to 3 samples. */
+  while (blkCnt > 0U)
+  {
+    /* C = A - B */
+    /* Subtract and then store the results in the destination buffer 4 samples at a time. */
+    *__SIMD32(pDst)++ = __QSUB8(*__SIMD32(pSrcA)++, *__SIMD32(pSrcB)++);
+
+    /* Decrement the loop counter */
+    blkCnt--;
+  }
+
+  /* If the blockSize is not a multiple of 4, compute any remaining output samples here.
+   ** No loop unrolling is used. */
+  blkCnt = blockSize % 0x4U;
+
+  while (blkCnt > 0U)
+  {
+    /* C = A - B */
+    /* Subtract and then store the result in the destination buffer. */
+    *pDst++ = __SSAT(*pSrcA++ - *pSrcB++, 8);
+
+    /* Decrement the loop counter */
+    blkCnt--;
+  }
+
+#else
+
+  /* Run the below code for Cortex-M0 */
+
+  /* Initialize blkCnt with number of samples */
+  blkCnt = blockSize;
+
+  while (blkCnt > 0U)
+  {
+    /* C = A - B */
+    /* Subtract and then store the result in the destination buffer. */
+    *pDst++ = (q7_t) __SSAT((q15_t) * pSrcA++ - *pSrcB++, 8);
+
+    /* Decrement the loop counter */
+    blkCnt--;
+  }
+
+#endif /* #if defined (ARM_MATH_DSP) */
+
+
+}
+
+/**
+ * @} end of BasicSub group
+ */
-- 
cgit