From 6ab94e0b318884bbcb95e2ea3835f951502e1d99 Mon Sep 17 00:00:00 2001
From: jaseg <git@jaseg.net>
Date: Wed, 14 Oct 2020 12:47:28 +0200
Subject: Move firmware into subdirectory

---
 .../Source/BasicMathFunctions/arm_dot_prod_q31.c   | 131 +++++++++++++++++++++
 1 file changed, 131 insertions(+)
 create mode 100644 fw/midi-dials/Drivers/CMSIS/DSP/Source/BasicMathFunctions/arm_dot_prod_q31.c

(limited to 'fw/midi-dials/Drivers/CMSIS/DSP/Source/BasicMathFunctions/arm_dot_prod_q31.c')

diff --git a/fw/midi-dials/Drivers/CMSIS/DSP/Source/BasicMathFunctions/arm_dot_prod_q31.c b/fw/midi-dials/Drivers/CMSIS/DSP/Source/BasicMathFunctions/arm_dot_prod_q31.c
new file mode 100644
index 0000000..e739879
--- /dev/null
+++ b/fw/midi-dials/Drivers/CMSIS/DSP/Source/BasicMathFunctions/arm_dot_prod_q31.c
@@ -0,0 +1,131 @@
+/* ----------------------------------------------------------------------
+ * Project:      CMSIS DSP Library
+ * Title:        arm_dot_prod_q31.c
+ * Description:  Q31 dot product
+ *
+ * $Date:        27. January 2017
+ * $Revision:    V.1.5.1
+ *
+ * Target Processor: Cortex-M cores
+ * -------------------------------------------------------------------- */
+/*
+ * Copyright (C) 2010-2017 ARM Limited or its affiliates. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "arm_math.h"
+
+/**
+ * @ingroup groupMath
+ */
+
+/**
+ * @addtogroup dot_prod
+ * @{
+ */
+
+/**
+ * @brief Dot product of Q31 vectors.
+ * @param[in]       *pSrcA points to the first input vector
+ * @param[in]       *pSrcB points to the second input vector
+ * @param[in]       blockSize number of samples in each vector
+ * @param[out]      *result output result returned here
+ * @return none.
+ *
+ * <b>Scaling and Overflow Behavior:</b>
+ * \par
+ * The intermediate multiplications are in 1.31 x 1.31 = 2.62 format and these
+ * are truncated to 2.48 format by discarding the lower 14 bits.
+ * The 2.48 result is then added without saturation to a 64-bit accumulator in 16.48 format.
+ * There are 15 guard bits in the accumulator and there is no risk of overflow as long as
+ * the length of the vectors is less than 2^16 elements.
+ * The return result is in 16.48 format.
+ */
+
+void arm_dot_prod_q31(
+  q31_t * pSrcA,
+  q31_t * pSrcB,
+  uint32_t blockSize,
+  q63_t * result)
+{
+  q63_t sum = 0;                                 /* Temporary result storage */
+  uint32_t blkCnt;                               /* loop counter */
+
+
+#if defined (ARM_MATH_DSP)
+
+/* Run the below code for Cortex-M4 and Cortex-M3 */
+  q31_t inA1, inA2, inA3, inA4;
+  q31_t inB1, inB2, inB3, inB4;
+
+  /*loop Unrolling */
+  blkCnt = blockSize >> 2U;
+
+  /* First part of the processing with loop unrolling.  Compute 4 outputs at a time.
+   ** a second loop below computes the remaining 1 to 3 samples. */
+  while (blkCnt > 0U)
+  {
+    /* C = A[0]* B[0] + A[1]* B[1] + A[2]* B[2] + .....+ A[blockSize-1]* B[blockSize-1] */
+    /* Calculate dot product and then store the result in a temporary buffer. */
+    inA1 = *pSrcA++;
+    inA2 = *pSrcA++;
+    inA3 = *pSrcA++;
+    inA4 = *pSrcA++;
+    inB1 = *pSrcB++;
+    inB2 = *pSrcB++;
+    inB3 = *pSrcB++;
+    inB4 = *pSrcB++;
+
+    sum += ((q63_t) inA1 * inB1) >> 14U;
+    sum += ((q63_t) inA2 * inB2) >> 14U;
+    sum += ((q63_t) inA3 * inB3) >> 14U;
+    sum += ((q63_t) inA4 * inB4) >> 14U;
+
+    /* Decrement the loop counter */
+    blkCnt--;
+  }
+
+  /* If the blockSize is not a multiple of 4, compute any remaining output samples here.
+   ** No loop unrolling is used. */
+  blkCnt = blockSize % 0x4U;
+
+#else
+
+  /* Run the below code for Cortex-M0 */
+
+  /* Initialize blkCnt with number of samples */
+  blkCnt = blockSize;
+
+#endif /* #if defined (ARM_MATH_DSP) */
+
+
+  while (blkCnt > 0U)
+  {
+    /* C = A[0]* B[0] + A[1]* B[1] + A[2]* B[2] + .....+ A[blockSize-1]* B[blockSize-1] */
+    /* Calculate dot product and then store the result in a temporary buffer. */
+    sum += ((q63_t) * pSrcA++ * *pSrcB++) >> 14U;
+
+    /* Decrement the loop counter */
+    blkCnt--;
+  }
+
+  /* Store the result in the destination buffer in 16.48 format */
+  *result = sum;
+}
+
+/**
+ * @} end of dot_prod group
+ */
-- 
cgit