From 7b85ba8d4fb34e76d34a2d581e89e856aa471cf5 Mon Sep 17 00:00:00 2001 From: jaseg Date: Mon, 21 Dec 2020 16:26:57 +0100 Subject: Move fw into direct subdir --- fw/hid-dials/src/usbd_conf.c | 576 ------------------------------------------- 1 file changed, 576 deletions(-) delete mode 100644 fw/hid-dials/src/usbd_conf.c (limited to 'fw/hid-dials/src/usbd_conf.c') diff --git a/fw/hid-dials/src/usbd_conf.c b/fw/hid-dials/src/usbd_conf.c deleted file mode 100644 index ccc4b16..0000000 --- a/fw/hid-dials/src/usbd_conf.c +++ /dev/null @@ -1,576 +0,0 @@ -#include "stm32f0xx.h" -#include "stm32f0xx_hal.h" -#include "usbd_def.h" -#include "usbd_core.h" - - -PCD_HandleTypeDef hpcd_USB_FS; - -void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state); - -void HAL_PCD_MspInit(PCD_HandleTypeDef* pcdHandle) -{ - __HAL_RCC_USB_CLK_ENABLE(); - - HAL_NVIC_SetPriority(USB_IRQn, 1, 0); - HAL_NVIC_EnableIRQ(USB_IRQn); -} - -void HAL_PCD_MspDeInit(PCD_HandleTypeDef* pcdHandle) -{ - __HAL_RCC_USB_CLK_DISABLE(); - - HAL_NVIC_DisableIRQ(USB_IRQn); -} - -void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd) -{ - USBD_LL_SetupStage((USBD_HandleTypeDef*)hpcd->pData, (uint8_t *)hpcd->Setup); -} - -void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) -{ - USBD_LL_DataOutStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->OUT_ep[epnum].xfer_buff); -} - -void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) -{ - USBD_LL_DataInStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->IN_ep[epnum].xfer_buff); -} - -void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd) -{ - USBD_LL_SOF((USBD_HandleTypeDef*)hpcd->pData); -} - -void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd) -{ - USBD_SpeedTypeDef speed = USBD_SPEED_FULL; - - /* Set USB current speed. */ - switch (hpcd->Init.speed) - { - case PCD_SPEED_FULL: - speed = USBD_SPEED_FULL; - break; - - default: - speed = USBD_SPEED_FULL; - break; - } - USBD_LL_SetSpeed((USBD_HandleTypeDef*)hpcd->pData, speed); - - /* Reset Device. */ - USBD_LL_Reset((USBD_HandleTypeDef*)hpcd->pData); -} - -/** - * @brief Suspend callback. - * When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it) - * @param hpcd: PCD handle - * @retval None - */ -void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd) -{ - /* Inform USB library that core enters in suspend Mode. */ - USBD_LL_Suspend((USBD_HandleTypeDef*)hpcd->pData); - /* Enter in STOP mode. */ - /* USER CODE BEGIN 2 */ - if (hpcd->Init.low_power_enable) - { - /* Set SLEEPDEEP bit and SleepOnExit of Cortex System Control Register. */ - SCB->SCR |= (uint32_t)((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk)); - } - /* USER CODE END 2 */ -} - -/** - * @brief Resume callback. - * When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it) - * @param hpcd: PCD handle - * @retval None - */ -void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd) -{ - /* USER CODE BEGIN 3 */ - - /* USER CODE END 3 */ - USBD_LL_Resume((USBD_HandleTypeDef*)hpcd->pData); -} - -/** - * @brief ISOOUTIncomplete callback. - * @param hpcd: PCD handle - * @param epnum: Endpoint number - * @retval None - */ -void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) -{ - USBD_LL_IsoOUTIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum); -} - -/** - * @brief ISOINIncomplete callback. - * @param hpcd: PCD handle - * @param epnum: Endpoint number - * @retval None - */ -void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) -{ - USBD_LL_IsoINIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum); -} - -/** - * @brief Connect callback. - * @param hpcd: PCD handle - * @retval None - */ -void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd) -{ - USBD_LL_DevConnected((USBD_HandleTypeDef*)hpcd->pData); -} - -/** - * @brief Disconnect callback. - * @param hpcd: PCD handle - * @retval None - */ -void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd) -{ - USBD_LL_DevDisconnected((USBD_HandleTypeDef*)hpcd->pData); -} - -/******************************************************************************* - LL Driver Interface (USB Device Library --> PCD) - *******************************************************************************/ - -/** - * @brief Initializes the low level portion of the device driver. - * @param pdev: Device handle - * @retval USBD status - */ -USBD_StatusTypeDef USBD_LL_Init(USBD_HandleTypeDef *pdev) -{ - /* Init USB Ip. */ - /* Link the driver to the stack. */ - hpcd_USB_FS.pData = pdev; - pdev->pData = &hpcd_USB_FS; - - hpcd_USB_FS.Instance = USB; - hpcd_USB_FS.Init.dev_endpoints = 8; - hpcd_USB_FS.Init.speed = PCD_SPEED_FULL; - hpcd_USB_FS.Init.ep0_mps = EP_MPS_64; - hpcd_USB_FS.Init.phy_itface = PCD_PHY_EMBEDDED; - hpcd_USB_FS.Init.low_power_enable = DISABLE; - hpcd_USB_FS.Init.lpm_enable = DISABLE; - hpcd_USB_FS.Init.battery_charging_enable = DISABLE; - if (HAL_PCD_Init(&hpcd_USB_FS) != HAL_OK) - { - //_Error_Handler(__FILE__, __LINE__); - } - - HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x00 , PCD_SNG_BUF, 0x18); - HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x80 , PCD_SNG_BUF, 0x58); - HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x81 , PCD_SNG_BUF, 0xC0); - HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x01 , PCD_SNG_BUF, 0x110); - HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x82 , PCD_SNG_BUF, 0x100); - return USBD_OK; -} - -/** - * @brief De-Initializes the low level portion of the device driver. - * @param pdev: Device handle - * @retval USBD status - */ -USBD_StatusTypeDef USBD_LL_DeInit(USBD_HandleTypeDef *pdev) -{ - HAL_StatusTypeDef hal_status = HAL_OK; - USBD_StatusTypeDef usb_status = USBD_OK; - - hal_status = HAL_PCD_DeInit(pdev->pData); - - switch (hal_status) { - case HAL_OK : - usb_status = USBD_OK; - break; - case HAL_ERROR : - usb_status = USBD_FAIL; - break; - case HAL_BUSY : - usb_status = USBD_BUSY; - break; - case HAL_TIMEOUT : - usb_status = USBD_FAIL; - break; - default : - usb_status = USBD_FAIL; - break; - } - return usb_status; -} - -/** - * @brief Starts the low level portion of the device driver. - * @param pdev: Device handle - * @retval USBD status - */ -USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev) -{ - HAL_StatusTypeDef hal_status = HAL_OK; - USBD_StatusTypeDef usb_status = USBD_OK; - - hal_status = HAL_PCD_Start(pdev->pData); - - switch (hal_status) { - case HAL_OK : - usb_status = USBD_OK; - break; - case HAL_ERROR : - usb_status = USBD_FAIL; - break; - case HAL_BUSY : - usb_status = USBD_BUSY; - break; - case HAL_TIMEOUT : - usb_status = USBD_FAIL; - break; - default : - usb_status = USBD_FAIL; - break; - } - return usb_status; -} - -/** - * @brief Stops the low level portion of the device driver. - * @param pdev: Device handle - * @retval USBD status - */ -USBD_StatusTypeDef USBD_LL_Stop(USBD_HandleTypeDef *pdev) -{ - HAL_StatusTypeDef hal_status = HAL_OK; - USBD_StatusTypeDef usb_status = USBD_OK; - - hal_status = HAL_PCD_Stop(pdev->pData); - - switch (hal_status) { - case HAL_OK : - usb_status = USBD_OK; - break; - case HAL_ERROR : - usb_status = USBD_FAIL; - break; - case HAL_BUSY : - usb_status = USBD_BUSY; - break; - case HAL_TIMEOUT : - usb_status = USBD_FAIL; - break; - default : - usb_status = USBD_FAIL; - break; - } - return usb_status; -} - -/** - * @brief Opens an endpoint of the low level driver. - * @param pdev: Device handle - * @param ep_addr: Endpoint number - * @param ep_type: Endpoint type - * @param ep_mps: Endpoint max packet size - * @retval USBD status - */ -USBD_StatusTypeDef USBD_LL_OpenEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t ep_type, uint16_t ep_mps) -{ - HAL_StatusTypeDef hal_status = HAL_OK; - USBD_StatusTypeDef usb_status = USBD_OK; - - hal_status = HAL_PCD_EP_Open(pdev->pData, ep_addr, ep_mps, ep_type); - - switch (hal_status) { - case HAL_OK : - usb_status = USBD_OK; - break; - case HAL_ERROR : - usb_status = USBD_FAIL; - break; - case HAL_BUSY : - usb_status = USBD_BUSY; - break; - case HAL_TIMEOUT : - usb_status = USBD_FAIL; - break; - default : - usb_status = USBD_FAIL; - break; - } - return usb_status; -} - -/** - * @brief Closes an endpoint of the low level driver. - * @param pdev: Device handle - * @param ep_addr: Endpoint number - * @retval USBD status - */ -USBD_StatusTypeDef USBD_LL_CloseEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr) -{ - HAL_StatusTypeDef hal_status = HAL_OK; - USBD_StatusTypeDef usb_status = USBD_OK; - - hal_status = HAL_PCD_EP_Close(pdev->pData, ep_addr); - - switch (hal_status) { - case HAL_OK : - usb_status = USBD_OK; - break; - case HAL_ERROR : - usb_status = USBD_FAIL; - break; - case HAL_BUSY : - usb_status = USBD_BUSY; - break; - case HAL_TIMEOUT : - usb_status = USBD_FAIL; - break; - default : - usb_status = USBD_FAIL; - break; - } - return usb_status; -} - -/** - * @brief Flushes an endpoint of the Low Level Driver. - * @param pdev: Device handle - * @param ep_addr: Endpoint number - * @retval USBD status - */ -USBD_StatusTypeDef USBD_LL_FlushEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr) -{ - HAL_StatusTypeDef hal_status = HAL_OK; - USBD_StatusTypeDef usb_status = USBD_OK; - - hal_status = HAL_PCD_EP_Flush(pdev->pData, ep_addr); - - switch (hal_status) { - case HAL_OK : - usb_status = USBD_OK; - break; - case HAL_ERROR : - usb_status = USBD_FAIL; - break; - case HAL_BUSY : - usb_status = USBD_BUSY; - break; - case HAL_TIMEOUT : - usb_status = USBD_FAIL; - break; - default : - usb_status = USBD_FAIL; - break; - } - return usb_status; -} - -/** - * @brief Sets a Stall condition on an endpoint of the Low Level Driver. - * @param pdev: Device handle - * @param ep_addr: Endpoint number - * @retval USBD status - */ -USBD_StatusTypeDef USBD_LL_StallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr) -{ - HAL_StatusTypeDef hal_status = HAL_OK; - USBD_StatusTypeDef usb_status = USBD_OK; - - hal_status = HAL_PCD_EP_SetStall(pdev->pData, ep_addr); - - switch (hal_status) { - case HAL_OK : - usb_status = USBD_OK; - break; - case HAL_ERROR : - usb_status = USBD_FAIL; - break; - case HAL_BUSY : - usb_status = USBD_BUSY; - break; - case HAL_TIMEOUT : - usb_status = USBD_FAIL; - break; - default : - usb_status = USBD_FAIL; - break; - } - return usb_status; -} - -/** - * @brief Clears a Stall condition on an endpoint of the Low Level Driver. - * @param pdev: Device handle - * @param ep_addr: Endpoint number - * @retval USBD status - */ -USBD_StatusTypeDef USBD_LL_ClearStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr) -{ - HAL_StatusTypeDef hal_status = HAL_OK; - USBD_StatusTypeDef usb_status = USBD_OK; - - hal_status = HAL_PCD_EP_ClrStall(pdev->pData, ep_addr); - - switch (hal_status) { - case HAL_OK : - usb_status = USBD_OK; - break; - case HAL_ERROR : - usb_status = USBD_FAIL; - break; - case HAL_BUSY : - usb_status = USBD_BUSY; - break; - case HAL_TIMEOUT : - usb_status = USBD_FAIL; - break; - default : - usb_status = USBD_FAIL; - break; - } - return usb_status; -} - -/** - * @brief Returns Stall condition. - * @param pdev: Device handle - * @param ep_addr: Endpoint number - * @retval Stall (1: Yes, 0: No) - */ -uint8_t USBD_LL_IsStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr) -{ - PCD_HandleTypeDef *hpcd = (PCD_HandleTypeDef*) pdev->pData; - - if((ep_addr & 0x80) == 0x80) - { - return hpcd->IN_ep[ep_addr & 0x7F].is_stall; - } - else - { - return hpcd->OUT_ep[ep_addr & 0x7F].is_stall; - } -} - -/** - * @brief Assigns a USB address to the device. - * @param pdev: Device handle - * @param dev_addr: Device address - * @retval USBD status - */ -USBD_StatusTypeDef USBD_LL_SetUSBAddress(USBD_HandleTypeDef *pdev, uint8_t dev_addr) -{ - HAL_StatusTypeDef hal_status = HAL_OK; - USBD_StatusTypeDef usb_status = USBD_OK; - - hal_status = HAL_PCD_SetAddress(pdev->pData, dev_addr); - - switch (hal_status) { - case HAL_OK : - usb_status = USBD_OK; - break; - case HAL_ERROR : - usb_status = USBD_FAIL; - break; - case HAL_BUSY : - usb_status = USBD_BUSY; - break; - case HAL_TIMEOUT : - usb_status = USBD_FAIL; - break; - default : - usb_status = USBD_FAIL; - break; - } - return usb_status; -} - -/** - * @brief Transmits data over an endpoint. - * @param pdev: Device handle - * @param ep_addr: Endpoint number - * @param pbuf: Pointer to data to be sent - * @param size: Data size - * @retval USBD status - */ -USBD_StatusTypeDef USBD_LL_Transmit(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t *pbuf, uint32_t size) -{ - HAL_StatusTypeDef hal_status = HAL_OK; - USBD_StatusTypeDef usb_status = USBD_OK; - - hal_status = HAL_PCD_EP_Transmit(pdev->pData, ep_addr, pbuf, size); - - switch (hal_status) { - case HAL_OK : - usb_status = USBD_OK; - break; - case HAL_ERROR : - usb_status = USBD_FAIL; - break; - case HAL_BUSY : - usb_status = USBD_BUSY; - break; - case HAL_TIMEOUT : - usb_status = USBD_FAIL; - break; - default : - usb_status = USBD_FAIL; - break; - } - return usb_status; -} - -/** - * @brief Prepares an endpoint for reception. - * @param pdev: Device handle - * @param ep_addr: Endpoint number - * @param pbuf: Pointer to data to be received - * @param size: Data size - * @retval USBD status - */ - -USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t *pbuf, uint32_t size) -{ - HAL_StatusTypeDef hal_status = HAL_OK; - USBD_StatusTypeDef usb_status = USBD_OK; - - hal_status = HAL_PCD_EP_Receive(pdev->pData, ep_addr, pbuf, size); - - switch (hal_status) { - case HAL_OK : - usb_status = USBD_OK; - break; - case HAL_ERROR : - usb_status = USBD_FAIL; - break; - case HAL_BUSY : - usb_status = USBD_BUSY; - break; - case HAL_TIMEOUT : - usb_status = USBD_FAIL; - break; - default : - usb_status = USBD_FAIL; - break; - } - return usb_status; -} - -uint32_t USBD_LL_GetRxDataSize(USBD_HandleTypeDef *pdev, uint8_t ep_addr) -{ - return HAL_PCD_EP_GetRxCount((PCD_HandleTypeDef*) pdev->pData, ep_addr); -} - -void USBD_LL_Delay(uint32_t Delay /* ms */) -{ - HAL_Delay(Delay); -} - -- cgit