From 7b85ba8d4fb34e76d34a2d581e89e856aa471cf5 Mon Sep 17 00:00:00 2001 From: jaseg Date: Mon, 21 Dec 2020 16:26:57 +0100 Subject: Move fw into direct subdir --- .../STM32_USB_Device_Library/Core/Src/usbd_core.c | 565 --------------------- 1 file changed, 565 deletions(-) delete mode 100644 fw/hid-dials/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c (limited to 'fw/hid-dials/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c') diff --git a/fw/hid-dials/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c b/fw/hid-dials/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c deleted file mode 100644 index 86fc2de..0000000 --- a/fw/hid-dials/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c +++ /dev/null @@ -1,565 +0,0 @@ -/** - ****************************************************************************** - * @file usbd_core.c - * @author MCD Application Team - * @version V2.4.2 - * @date 11-December-2015 - * @brief This file provides all the USBD core functions. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2015 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "usbd_core.h" - -/** @addtogroup STM32_USBD_DEVICE_LIBRARY -* @{ -*/ - - -/** @defgroup USBD_CORE -* @brief usbd core module -* @{ -*/ - -/** @defgroup USBD_CORE_Private_TypesDefinitions -* @{ -*/ -/** -* @} -*/ - - -/** @defgroup USBD_CORE_Private_Defines -* @{ -*/ - -/** -* @} -*/ - - -/** @defgroup USBD_CORE_Private_Macros -* @{ -*/ -/** -* @} -*/ - - - - -/** @defgroup USBD_CORE_Private_FunctionPrototypes -* @{ -*/ - -/** -* @} -*/ - -/** @defgroup USBD_CORE_Private_Variables -* @{ -*/ - -/** -* @} -*/ - -/** @defgroup USBD_CORE_Private_Functions -* @{ -*/ - -/** -* @brief USBD_Init -* Initializes the device stack and load the class driver -* @param pdev: device instance -* @param pdesc: Descriptor structure address -* @param id: Low level core index -* @retval None -*/ -USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev, USBD_DescriptorsTypeDef *pdesc, uint8_t id) -{ - /* Check whether the USB Host handle is valid */ - if(pdev == NULL) - { - USBD_ErrLog("Invalid Device handle"); - return USBD_FAIL; - } - - /* Unlink previous class*/ - if(pdev->pClass != NULL) - { - pdev->pClass = NULL; - } - - /* Assign USBD Descriptors */ - if(pdesc != NULL) - { - pdev->pDesc = pdesc; - } - - /* Set Device initial State */ - pdev->dev_state = USBD_STATE_DEFAULT; - pdev->id = id; - /* Initialize low level driver */ - USBD_LL_Init(pdev); - - return USBD_OK; -} - -/** -* @brief USBD_DeInit -* Re-Initialize th device library -* @param pdev: device instance -* @retval status: status -*/ -USBD_StatusTypeDef USBD_DeInit(USBD_HandleTypeDef *pdev) -{ - /* Set Default State */ - pdev->dev_state = USBD_STATE_DEFAULT; - - /* Free Class Resources */ - pdev->pClass->DeInit(pdev, pdev->dev_config); - - /* Stop the low level driver */ - USBD_LL_Stop(pdev); - - /* Initialize low level driver */ - USBD_LL_DeInit(pdev); - - return USBD_OK; -} - - -/** - * @brief USBD_RegisterClass - * Link class driver to Device Core. - * @param pDevice : Device Handle - * @param pclass: Class handle - * @retval USBD Status - */ -USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, USBD_ClassTypeDef *pclass) -{ - USBD_StatusTypeDef status = USBD_OK; - if(pclass != 0) - { - /* link the class to the USB Device handle */ - pdev->pClass = pclass; - status = USBD_OK; - } - else - { - USBD_ErrLog("Invalid Class handle"); - status = USBD_FAIL; - } - - return status; -} - -/** - * @brief USBD_Start - * Start the USB Device Core. - * @param pdev: Device Handle - * @retval USBD Status - */ -USBD_StatusTypeDef USBD_Start (USBD_HandleTypeDef *pdev) -{ - - /* Start the low level driver */ - USBD_LL_Start(pdev); - - return USBD_OK; -} - -/** - * @brief USBD_Stop - * Stop the USB Device Core. - * @param pdev: Device Handle - * @retval USBD Status - */ -USBD_StatusTypeDef USBD_Stop (USBD_HandleTypeDef *pdev) -{ - /* Free Class Resources */ - pdev->pClass->DeInit(pdev, pdev->dev_config); - - /* Stop the low level driver */ - USBD_LL_Stop(pdev); - - return USBD_OK; -} - -/** -* @brief USBD_RunTestMode -* Launch test mode process -* @param pdev: device instance -* @retval status -*/ -USBD_StatusTypeDef USBD_RunTestMode (USBD_HandleTypeDef *pdev) -{ - return USBD_OK; -} - - -/** -* @brief USBD_SetClassConfig -* Configure device and start the interface -* @param pdev: device instance -* @param cfgidx: configuration index -* @retval status -*/ - -USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx) -{ - USBD_StatusTypeDef ret = USBD_FAIL; - - if(pdev->pClass != NULL) - { - /* Set configuration and Start the Class*/ - if(pdev->pClass->Init(pdev, cfgidx) == 0) - { - ret = USBD_OK; - } - } - return ret; -} - -/** -* @brief USBD_ClrClassConfig -* Clear current configuration -* @param pdev: device instance -* @param cfgidx: configuration index -* @retval status: USBD_StatusTypeDef -*/ -USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx) -{ - /* Clear configuration and De-initialize the Class process*/ - pdev->pClass->DeInit(pdev, cfgidx); - return USBD_OK; -} - - -/** -* @brief USBD_SetupStage -* Handle the setup stage -* @param pdev: device instance -* @retval status -*/ -USBD_StatusTypeDef USBD_LL_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup) -{ - - USBD_ParseSetupRequest(&pdev->request, psetup); - - pdev->ep0_state = USBD_EP0_SETUP; - pdev->ep0_data_len = pdev->request.wLength; - - switch (pdev->request.bmRequest & 0x1F) - { - case USB_REQ_RECIPIENT_DEVICE: - USBD_StdDevReq (pdev, &pdev->request); - break; - - case USB_REQ_RECIPIENT_INTERFACE: - USBD_StdItfReq(pdev, &pdev->request); - break; - - case USB_REQ_RECIPIENT_ENDPOINT: - USBD_StdEPReq(pdev, &pdev->request); - break; - - default: - USBD_LL_StallEP(pdev , pdev->request.bmRequest & 0x80); - break; - } - return USBD_OK; -} - -/** -* @brief USBD_DataOutStage -* Handle data OUT stage -* @param pdev: device instance -* @param epnum: endpoint index -* @retval status -*/ -USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata) -{ - USBD_EndpointTypeDef *pep; - - if(epnum == 0) - { - pep = &pdev->ep_out[0]; - - if ( pdev->ep0_state == USBD_EP0_DATA_OUT) - { - if(pep->rem_length > pep->maxpacket) - { - pep->rem_length -= pep->maxpacket; - - USBD_CtlContinueRx (pdev, - pdata, - MIN(pep->rem_length ,pep->maxpacket)); - } - else - { - if((pdev->pClass->EP0_RxReady != NULL)&& - (pdev->dev_state == USBD_STATE_CONFIGURED)) - { - pdev->pClass->EP0_RxReady(pdev); - } - USBD_CtlSendStatus(pdev); - } - } - } - else if((pdev->pClass->DataOut != NULL)&& - (pdev->dev_state == USBD_STATE_CONFIGURED)) - { - pdev->pClass->DataOut(pdev, epnum); - } - return USBD_OK; -} - -/** -* @brief USBD_DataInStage -* Handle data in stage -* @param pdev: device instance -* @param epnum: endpoint index -* @retval status -*/ -USBD_StatusTypeDef USBD_LL_DataInStage(USBD_HandleTypeDef *pdev ,uint8_t epnum, uint8_t *pdata) -{ - USBD_EndpointTypeDef *pep; - - if(epnum == 0) - { - pep = &pdev->ep_in[0]; - - if ( pdev->ep0_state == USBD_EP0_DATA_IN) - { - if(pep->rem_length > pep->maxpacket) - { - pep->rem_length -= pep->maxpacket; - - USBD_CtlContinueSendData (pdev, - pdata, - pep->rem_length); - - /* Prepare endpoint for premature end of transfer */ - USBD_LL_PrepareReceive (pdev, - 0, - NULL, - 0); - } - else - { /* last packet is MPS multiple, so send ZLP packet */ - if((pep->total_length % pep->maxpacket == 0) && - (pep->total_length >= pep->maxpacket) && - (pep->total_length < pdev->ep0_data_len )) - { - - USBD_CtlContinueSendData(pdev , NULL, 0); - pdev->ep0_data_len = 0; - - /* Prepare endpoint for premature end of transfer */ - USBD_LL_PrepareReceive (pdev, - 0, - NULL, - 0); - } - else - { - if((pdev->pClass->EP0_TxSent != NULL)&& - (pdev->dev_state == USBD_STATE_CONFIGURED)) - { - pdev->pClass->EP0_TxSent(pdev); - } - USBD_CtlReceiveStatus(pdev); - } - } - } - if (pdev->dev_test_mode == 1) - { - USBD_RunTestMode(pdev); - pdev->dev_test_mode = 0; - } - } - else if((pdev->pClass->DataIn != NULL)&& - (pdev->dev_state == USBD_STATE_CONFIGURED)) - { - pdev->pClass->DataIn(pdev, epnum); - } - return USBD_OK; -} - -/** -* @brief USBD_LL_Reset -* Handle Reset event -* @param pdev: device instance -* @retval status -*/ - -USBD_StatusTypeDef USBD_LL_Reset(USBD_HandleTypeDef *pdev) -{ - /* Open EP0 OUT */ - USBD_LL_OpenEP(pdev, - 0x00, - USBD_EP_TYPE_CTRL, - USB_MAX_EP0_SIZE); - - pdev->ep_out[0].maxpacket = USB_MAX_EP0_SIZE; - - /* Open EP0 IN */ - USBD_LL_OpenEP(pdev, - 0x80, - USBD_EP_TYPE_CTRL, - USB_MAX_EP0_SIZE); - - pdev->ep_in[0].maxpacket = USB_MAX_EP0_SIZE; - /* Upon Reset call user call back */ - pdev->dev_state = USBD_STATE_DEFAULT; - - if (pdev->pClassData) - pdev->pClass->DeInit(pdev, pdev->dev_config); - - - return USBD_OK; -} - - - - -/** -* @brief USBD_LL_Reset -* Handle Reset event -* @param pdev: device instance -* @retval status -*/ -USBD_StatusTypeDef USBD_LL_SetSpeed(USBD_HandleTypeDef *pdev, USBD_SpeedTypeDef speed) -{ - pdev->dev_speed = speed; - return USBD_OK; -} - -/** -* @brief USBD_Suspend -* Handle Suspend event -* @param pdev: device instance -* @retval status -*/ - -USBD_StatusTypeDef USBD_LL_Suspend(USBD_HandleTypeDef *pdev) -{ - pdev->dev_old_state = pdev->dev_state; - pdev->dev_state = USBD_STATE_SUSPENDED; - return USBD_OK; -} - -/** -* @brief USBD_Resume -* Handle Resume event -* @param pdev: device instance -* @retval status -*/ - -USBD_StatusTypeDef USBD_LL_Resume(USBD_HandleTypeDef *pdev) -{ - pdev->dev_state = pdev->dev_old_state; - return USBD_OK; -} - -/** -* @brief USBD_SOF -* Handle SOF event -* @param pdev: device instance -* @retval status -*/ - -USBD_StatusTypeDef USBD_LL_SOF(USBD_HandleTypeDef *pdev) -{ - if(pdev->dev_state == USBD_STATE_CONFIGURED) - { - if(pdev->pClass->SOF != NULL) - { - pdev->pClass->SOF(pdev); - } - } - return USBD_OK; -} - -/** -* @brief USBD_IsoINIncomplete -* Handle iso in incomplete event -* @param pdev: device instance -* @retval status -*/ -USBD_StatusTypeDef USBD_LL_IsoINIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum) -{ - return USBD_OK; -} - -/** -* @brief USBD_IsoOUTIncomplete -* Handle iso out incomplete event -* @param pdev: device instance -* @retval status -*/ -USBD_StatusTypeDef USBD_LL_IsoOUTIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum) -{ - return USBD_OK; -} - -/** -* @brief USBD_DevConnected -* Handle device connection event -* @param pdev: device instance -* @retval status -*/ -USBD_StatusTypeDef USBD_LL_DevConnected(USBD_HandleTypeDef *pdev) -{ - return USBD_OK; -} - -/** -* @brief USBD_DevDisconnected -* Handle device disconnection event -* @param pdev: device instance -* @retval status -*/ -USBD_StatusTypeDef USBD_LL_DevDisconnected(USBD_HandleTypeDef *pdev) -{ - /* Free Class Resources */ - pdev->dev_state = USBD_STATE_DEFAULT; - pdev->pClass->DeInit(pdev, pdev->dev_config); - - return USBD_OK; -} -/** -* @} -*/ - - -/** -* @} -*/ - - -/** -* @} -*/ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - -- cgit