From d8b6d18d2fefee381eb6a26334a13e94126b6d8e Mon Sep 17 00:00:00 2001 From: jaseg Date: Mon, 21 Dec 2020 16:22:11 +0100 Subject: Remove obsolete template code from fw --- fw/hid-dials/Inc/main.h | 71 -------- fw/hid-dials/Inc/stm32f0xx_hal_conf.h | 319 ---------------------------------- fw/hid-dials/Inc/stm32f0xx_it.h | 68 -------- fw/hid-dials/Inc/usb_device.h | 115 ------------ fw/hid-dials/Inc/usbd_conf.h | 204 ---------------------- fw/hid-dials/Inc/usbd_desc.h | 156 ----------------- fw/hid-dials/Inc/usbd_hid.h | 193 -------------------- 7 files changed, 1126 deletions(-) delete mode 100644 fw/hid-dials/Inc/main.h delete mode 100644 fw/hid-dials/Inc/stm32f0xx_hal_conf.h delete mode 100644 fw/hid-dials/Inc/stm32f0xx_it.h delete mode 100644 fw/hid-dials/Inc/usb_device.h delete mode 100644 fw/hid-dials/Inc/usbd_conf.h delete mode 100644 fw/hid-dials/Inc/usbd_desc.h delete mode 100644 fw/hid-dials/Inc/usbd_hid.h (limited to 'fw/hid-dials/Inc') diff --git a/fw/hid-dials/Inc/main.h b/fw/hid-dials/Inc/main.h deleted file mode 100644 index a80f8f4..0000000 --- a/fw/hid-dials/Inc/main.h +++ /dev/null @@ -1,71 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file : main.h - * @brief : Header for main.c file. - * This file contains the common defines of the application. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2020 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ -/* USER CODE END Header */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __MAIN_H -#define __MAIN_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f0xx_hal.h" - -/* Private includes ----------------------------------------------------------*/ -/* USER CODE BEGIN Includes */ - -/* USER CODE END Includes */ - -/* Exported types ------------------------------------------------------------*/ -/* USER CODE BEGIN ET */ - -/* USER CODE END ET */ - -/* Exported constants --------------------------------------------------------*/ -/* USER CODE BEGIN EC */ - -/* USER CODE END EC */ - -/* Exported macro ------------------------------------------------------------*/ -/* USER CODE BEGIN EM */ - -/* USER CODE END EM */ - -/* Exported functions prototypes ---------------------------------------------*/ -void Error_Handler(void); - -/* USER CODE BEGIN EFP */ - -/* USER CODE END EFP */ - -/* Private defines -----------------------------------------------------------*/ -/* USER CODE BEGIN Private defines */ - -/* USER CODE END Private defines */ - -#ifdef __cplusplus -} -#endif - -#endif /* __MAIN_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/fw/hid-dials/Inc/stm32f0xx_hal_conf.h b/fw/hid-dials/Inc/stm32f0xx_hal_conf.h deleted file mode 100644 index 78c43f6..0000000 --- a/fw/hid-dials/Inc/stm32f0xx_hal_conf.h +++ /dev/null @@ -1,319 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f0xx_hal_conf.h - * @brief HAL configuration file. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F0xx_HAL_CONF_H -#define __STM32F0xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED - #define HAL_ADC_MODULE_ENABLED -/*#define HAL_CRYP_MODULE_ENABLED */ -/*#define HAL_CAN_MODULE_ENABLED */ -/*#define HAL_CEC_MODULE_ENABLED */ -/*#define HAL_COMP_MODULE_ENABLED */ -/*#define HAL_CRC_MODULE_ENABLED */ -/*#define HAL_CRYP_MODULE_ENABLED */ -/*#define HAL_TSC_MODULE_ENABLED */ -/*#define HAL_DAC_MODULE_ENABLED */ -/*#define HAL_I2S_MODULE_ENABLED */ -/*#define HAL_IWDG_MODULE_ENABLED */ -/*#define HAL_LCD_MODULE_ENABLED */ -/*#define HAL_LPTIM_MODULE_ENABLED */ -/*#define HAL_RNG_MODULE_ENABLED */ -/*#define HAL_RTC_MODULE_ENABLED */ -/*#define HAL_SPI_MODULE_ENABLED */ -/*#define HAL_TIM_MODULE_ENABLED */ -/*#define HAL_UART_MODULE_ENABLED */ -/*#define HAL_USART_MODULE_ENABLED */ -/*#define HAL_IRDA_MODULE_ENABLED */ -/*#define HAL_SMARTCARD_MODULE_ENABLED */ -/*#define HAL_SMBUS_MODULE_ENABLED */ -/*#define HAL_WWDG_MODULE_ENABLED */ -#define HAL_PCD_MODULE_ENABLED -#define HAL_CORTEX_MODULE_ENABLED -#define HAL_DMA_MODULE_ENABLED -#define HAL_FLASH_MODULE_ENABLED -#define HAL_GPIO_MODULE_ENABLED -#define HAL_EXTI_MODULE_ENABLED -#define HAL_PWR_MODULE_ENABLED -#define HAL_RCC_MODULE_ENABLED -#define HAL_I2C_MODULE_ENABLED - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -/** - * @brief In the following line adjust the External High Speed oscillator (HSE) Startup - * Timeout value - */ -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT ((uint32_t)100) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup - * Timeout value - */ -#if !defined (HSI_STARTUP_TIMEOUT) - #define HSI_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSI start up */ -#endif /* HSI_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator for ADC (HSI14) value. - */ -#if !defined (HSI14_VALUE) -#define HSI14_VALUE ((uint32_t)14000000) /*!< Value of the Internal High Speed oscillator for ADC in Hz. - The real value may vary depending on the variations - in voltage and temperature. */ -#endif /* HSI14_VALUE */ - -/** - * @brief Internal High Speed oscillator for USB (HSI48) value. - */ -#if !defined (HSI48_VALUE) -#define HSI48_VALUE ((uint32_t)48000000) /*!< Value of the Internal High Speed oscillator for USB in Hz. - The real value may vary depending on the variations - in voltage and temperature. */ -#endif /* HSI48_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE ((uint32_t)40000) -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature. */ -/** - * @brief External Low Speed oscillator (LSI) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)0) /*!< tick interrupt priority (lowest by default) */ - /* Warning: Must be set to higher priority for HAL_Delay() */ - /* and HAL_GetTick() usage under interrupt context */ -#define USE_RTOS 0 -#define PREFETCH_ENABLE 1 -#define INSTRUCTION_CACHE_ENABLE 0 -#define DATA_CACHE_ENABLE 0 -#define USE_SPI_CRC 0U - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ -#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ -#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_TSC_REGISTER_CALLBACKS 0U /* TSC register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1U */ - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f0xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f0xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f0xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f0xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f0xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f0xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f0xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f0xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_COMP_MODULE_ENABLED - #include "stm32f0xx_hal_comp.h" -#endif /* HAL_COMP_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f0xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f0xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f0xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f0xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f0xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f0xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f0xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f0xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f0xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f0xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f0xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_SMBUS_MODULE_ENABLED - #include "stm32f0xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f0xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f0xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_TSC_MODULE_ENABLED - #include "stm32f0xx_hal_tsc.h" -#endif /* HAL_TSC_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f0xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f0xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f0xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F0xx_HAL_CONF_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/fw/hid-dials/Inc/stm32f0xx_it.h b/fw/hid-dials/Inc/stm32f0xx_it.h deleted file mode 100644 index daef239..0000000 --- a/fw/hid-dials/Inc/stm32f0xx_it.h +++ /dev/null @@ -1,68 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file stm32f0xx_it.h - * @brief This file contains the headers of the interrupt handlers. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2020 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ -/* USER CODE END Header */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F0xx_IT_H -#define __STM32F0xx_IT_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Private includes ----------------------------------------------------------*/ -/* USER CODE BEGIN Includes */ - -/* USER CODE END Includes */ - -/* Exported types ------------------------------------------------------------*/ -/* USER CODE BEGIN ET */ - -/* USER CODE END ET */ - -/* Exported constants --------------------------------------------------------*/ -/* USER CODE BEGIN EC */ - -/* USER CODE END EC */ - -/* Exported macro ------------------------------------------------------------*/ -/* USER CODE BEGIN EM */ - -/* USER CODE END EM */ - -/* Exported functions prototypes ---------------------------------------------*/ -void NMI_Handler(void); -void HardFault_Handler(void); -void SVC_Handler(void); -void PendSV_Handler(void); -void SysTick_Handler(void); -void DMA1_Channel1_IRQHandler(void); -void USB_IRQHandler(void); - -/* USER CODE BEGIN EFP */ - -/* USER CODE END EFP */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F0xx_IT_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/fw/hid-dials/Inc/usb_device.h b/fw/hid-dials/Inc/usb_device.h deleted file mode 100644 index 5437462..0000000 --- a/fw/hid-dials/Inc/usb_device.h +++ /dev/null @@ -1,115 +0,0 @@ -/** - ****************************************************************************** - * @file : usb_device.h - * @version : v2.0_Cube - * @brief : Header for usb_device.c file. - ****************************************************************************** - * This notice applies to any and all portions of this file - * that are not between comment pairs USER CODE BEGIN and - * USER CODE END. Other portions of this file, whether - * inserted by the user or by software development tools - * are owned by their respective copyright owners. - * - * Copyright (c) 2018 STMicroelectronics International N.V. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted, provided that the following conditions are met: - * - * 1. Redistribution of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of other - * contributors to this software may be used to endorse or promote products - * derived from this software without specific written permission. - * 4. This software, including modifications and/or derivative works of this - * software, must execute solely and exclusively on microcontroller or - * microprocessor devices manufactured by or for STMicroelectronics. - * 5. Redistribution and use of this software other than as permitted under - * this license is void and will automatically terminate your rights under - * this license. - * - * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A - * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY - * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT - * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, - * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __USB_DEVICE__H__ -#define __USB_DEVICE__H__ - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f0xx.h" -#include "stm32f0xx_hal.h" -#include "usbd_def.h" - -/* USER CODE BEGIN INCLUDE */ - -extern void MX_USB_HID_INIT(void); - -/* USER CODE END INCLUDE */ - -/** @addtogroup USBD_OTG_DRIVER - * @{ - */ - -/** @defgroup USBD_DEVICE USBD_DEVICE - * @brief Device file for Usb otg low level driver. - * @{ - */ - -/** @defgroup USBD_DEVICE_Exported_Variables USBD_DEVICE_Exported_Variables - * @brief Public variables. - * @{ - */ - -/** USB device core handle. */ -extern USBD_HandleTypeDef hUsbDeviceFS; - -/** - * @} - */ - -/** @defgroup USBD_DEVICE_Exported_FunctionsPrototype USBD_DEVICE_Exported_FunctionsPrototype - * @brief Declaration of public functions for Usb device. - * @{ - */ - -/** USB Device initialization function. */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __USB_DEVICE__H__ */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/fw/hid-dials/Inc/usbd_conf.h b/fw/hid-dials/Inc/usbd_conf.h deleted file mode 100644 index f3779cd..0000000 --- a/fw/hid-dials/Inc/usbd_conf.h +++ /dev/null @@ -1,204 +0,0 @@ -/** - ****************************************************************************** - * @file : usbd_conf.h - * @version : v2.0_Cube - * @brief : Header for usbd_conf.c file. - ****************************************************************************** - * This notice applies to any and all portions of this file - * that are not between comment pairs USER CODE BEGIN and - * USER CODE END. Other portions of this file, whether - * inserted by the user or by software development tools - * are owned by their respective copyright owners. - * - * Copyright (c) 2018 STMicroelectronics International N.V. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted, provided that the following conditions are met: - * - * 1. Redistribution of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of other - * contributors to this software may be used to endorse or promote products - * derived from this software without specific written permission. - * 4. This software, including modifications and/or derivative works of this - * software, must execute solely and exclusively on microcontroller or - * microprocessor devices manufactured by or for STMicroelectronics. - * 5. Redistribution and use of this software other than as permitted under - * this license is void and will automatically terminate your rights under - * this license. - * - * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A - * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY - * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT - * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, - * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __USBD_CONF__H__ -#define __USBD_CONF__H__ - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include -#include -#include -#include "stm32f0xx.h" -#include "stm32f0xx_hal.h" -#include "usbd_def.h" - -/* USER CODE BEGIN INCLUDE */ - -/* USER CODE END INCLUDE */ - -/** @addtogroup USBD_OTG_DRIVER - * @{ - */ - -/** @defgroup USBD_CONF USBD_CONF - * @brief Configuration file for Usb otg low level driver. - * @{ - */ - -/** @defgroup USBD_CONF_Exported_Variables USBD_CONF_Exported_Variables - * @brief Public variables. - * @{ - */ - -/** - * @} - */ - -/** @defgroup USBD_CONF_Exported_Defines USBD_CONF_Exported_Defines - * @brief Defines for configuration of the Usb device. - * @{ - */ - -/*---------- -----------*/ -#define USBD_MAX_NUM_INTERFACES 1 -/*---------- -----------*/ -#define USBD_MAX_NUM_CONFIGURATION 1 -/*---------- -----------*/ -#define USBD_MAX_STR_DESC_SIZ 512 -/*---------- -----------*/ -#define USBD_SUPPORT_USER_STRING 0 -/*---------- -----------*/ -#define USBD_DEBUG_LEVEL 0 -/*---------- -----------*/ -#define USBD_SELF_POWERED 1 -/*---------- -----------*/ -#define MAX_STATIC_ALLOC_SIZE 512 - -/****************************************/ -/* #define for FS and HS identification */ -#define DEVICE_FS 0 - -/** - * @} - */ - -/** @defgroup USBD_CONF_Exported_Macros USBD_CONF_Exported_Macros - * @brief Aliases. - * @{ - */ - -/* Memory management macros */ - -/** Alias for memory allocation. */ -#define USBD_malloc malloc -//(uint32_t *)USBD_static_malloc - -/** Alias for memory release. */ -#define USBD_free free - -/** Alias for memory set. */ -#define USBD_memset /* Not used */ - -/** Alias for memory copy. */ -#define USBD_memcpy /* Not used */ - -/** Alias for delay. */ -#define USBD_Delay HAL_Delay - -/* DEBUG macros */ - -#if (USBD_DEBUG_LEVEL > 0) -#define USBD_UsrLog(...) printf(__VA_ARGS__);\ - printf("\n"); -#else -#define USBD_UsrLog(...) -#endif - -#if (USBD_DEBUG_LEVEL > 1) - -#define USBD_ErrLog(...) printf("ERROR: ") ;\ - printf(__VA_ARGS__);\ - printf("\n"); -#else -#define USBD_ErrLog(...) -#endif - -#if (USBD_DEBUG_LEVEL > 2) -#define USBD_DbgLog(...) printf("DEBUG : ") ;\ - printf(__VA_ARGS__);\ - printf("\n"); -#else -#define USBD_DbgLog(...) -#endif - -/** - * @} - */ - -/** @defgroup USBD_CONF_Exported_Types USBD_CONF_Exported_Types - * @brief Types. - * @{ - */ - -/** - * @} - */ - -/** @defgroup USBD_CONF_Exported_FunctionsPrototype USBD_CONF_Exported_FunctionsPrototype - * @brief Declaration of public functions for Usb device. - * @{ - */ - -/* Exported functions -------------------------------------------------------*/ -//void *USBD_static_malloc(uint32_t size); -void USBD_static_free(void *p); -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __USBD_CONF__H__ */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/fw/hid-dials/Inc/usbd_desc.h b/fw/hid-dials/Inc/usbd_desc.h deleted file mode 100644 index 9abf0af..0000000 --- a/fw/hid-dials/Inc/usbd_desc.h +++ /dev/null @@ -1,156 +0,0 @@ -/** - ****************************************************************************** - * @file : usbd_desc.h - * @version : v2.0_Cube - * @brief : Header for usbd_desc.c file. - ****************************************************************************** - * This notice applies to any and all portions of this file - * that are not between comment pairs USER CODE BEGIN and - * USER CODE END. Other portions of this file, whether - * inserted by the user or by software development tools - * are owned by their respective copyright owners. - * - * Copyright (c) 2018 STMicroelectronics International N.V. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted, provided that the following conditions are met: - * - * 1. Redistribution of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of other - * contributors to this software may be used to endorse or promote products - * derived from this software without specific written permission. - * 4. This software, including modifications and/or derivative works of this - * software, must execute solely and exclusively on microcontroller or - * microprocessor devices manufactured by or for STMicroelectronics. - * 5. Redistribution and use of this software other than as permitted under - * this license is void and will automatically terminate your rights under - * this license. - * - * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A - * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY - * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT - * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, - * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __USBD_DESC__H__ -#define __USBD_DESC__H__ - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "usbd_def.h" - -/* USER CODE BEGIN INCLUDE */ - -/* USER CODE END INCLUDE */ - -/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY - * @{ - */ - -/** @defgroup USBD_DESC USBD_DESC - * @brief Usb device descriptors module. - * @{ - */ - -/** @defgroup USBD_DESC_Exported_Defines USBD_DESC_Exported_Defines - * @brief Defines. - * @{ - */ - -/* USER CODE BEGIN EXPORTED_DEFINES */ - -/* USER CODE END EXPORTED_DEFINES */ - -/** - * @} - */ - -/** @defgroup USBD_DESC_Exported_TypesDefinitions USBD_DESC_Exported_TypesDefinitions - * @brief Types. - * @{ - */ - -/* USER CODE BEGIN EXPORTED_TYPES */ - -/* USER CODE END EXPORTED_TYPES */ - -/** - * @} - */ - -/** @defgroup USBD_DESC_Exported_Macros USBD_DESC_Exported_Macros - * @brief Aliases. - * @{ - */ - -/* USER CODE BEGIN EXPORTED_MACRO */ - -/* USER CODE END EXPORTED_MACRO */ - -/** - * @} - */ - -/** @defgroup USBD_DESC_Exported_Variables USBD_DESC_Exported_Variables - * @brief Public variables. - * @{ - */ - -/** Descriptor for the Usb device. */ -extern USBD_DescriptorsTypeDef FS_Desc; - -/* USER CODE BEGIN EXPORTED_VARIABLES */ - -/* USER CODE END EXPORTED_VARIABLES */ - -/** - * @} - */ - -/** @defgroup USBD_DESC_Exported_FunctionsPrototype USBD_DESC_Exported_FunctionsPrototype - * @brief Public functions declaration. - * @{ - */ - -/* USER CODE BEGIN EXPORTED_FUNCTIONS */ - -/* USER CODE END EXPORTED_FUNCTIONS */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __USBD_DESC__H__ */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/fw/hid-dials/Inc/usbd_hid.h b/fw/hid-dials/Inc/usbd_hid.h deleted file mode 100644 index fa2f0a2..0000000 --- a/fw/hid-dials/Inc/usbd_hid.h +++ /dev/null @@ -1,193 +0,0 @@ -/** - ****************************************************************************** - * @file usbd_hid.h - * @author MCD Application Team - * @version V2.4.2 - * @date 11-December-2015 - * @brief Header file for the usbd_hid_core.c file. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2015 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __USB_HID_H -#define __USB_HID_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "usbd_ioreq.h" - -/** @addtogroup STM32_USB_DEVICE_LIBRARY - * @{ - */ - -/** @defgroup USBD_HID - * @brief This file is the Header file for usbd_hid.c - * @{ - */ - -/** set this to 0/1 if to have led or not - * it can be defined in the build configuraton symbol */ -#ifndef HID_LED_SUPPORT -# define HID_LED_SUPPORT 0 -#endif - - /** define VOLUME_REPORT to tehr eport ID to use for volume or 0 if not support*/ -#define HID_MEDIA_REPORT 2 -#ifdef HID_MEDIA_REPORT -# define HID_MEDIA_SIZE 25 -#else -# define HID_MEDIA_SIZE 0 -#endif - -#if HID_MEDIA_REPORT == 1 -# error "volume report can't be 1 already sued for stad report" -#endif - -/** @defgroup USBD_HID_Exported_Defines - * @{ - */ -#define HID_EPIN_ADDR 0x81 - -#define HID_EPOUT_ADDR 0x01 -#define HID_EPOUT_SIZE 0x08 - -#define HID_EPIN_SIZE 16 - - #if HID_LED_SUPPORT -# define CFG_ADD_SIZE 7 /* one ep */ -# define HID_NUM_EP 2 -#else -# define CFG_ADD_SIZE 0 -# define HID_NUM_EP 1 -#endif - -#define USB_HID_CONFIG_DESC_SIZ (34+CFG_ADD_SIZE) - -#define USB_HID_DESC_SIZ 9 - - - -#if HID_LED_SUPPORT -# define HID_LED_SIZE 18 -#else -# define HID_LED_SIZE 0 -#endif - - - -#define HID_REPORT_DESC_SIZE 104 - - -#define HID_DESCRIPTOR_TYPE 0x21 -#define HID_REPORT_DESC 0x22 - -#define HID_HS_BINTERVAL 0x07 -#define HID_FS_BINTERVAL 0x0A -#define HID_POLLING_INTERVAL 0x0A - -#define HID_REQ_SET_PROTOCOL 0x0B -#define HID_REQ_GET_PROTOCOL 0x03 - -#define HID_REQ_SET_IDLE 0x0A -#define HID_REQ_GET_IDLE 0x02 - -#define HID_REQ_SET_REPORT 0x09 -#define HID_REQ_GET_REPORT 0x01 -/** - * @} - */ - - -/** @defgroup USBD_CORE_Exported_TypesDefinitions - * @{ - */ -typedef enum -{ - HID_IDLE = 0, - HID_BUSY, -} -HID_StateTypeDef; - - -typedef struct -{ - uint32_t Protocol; - uint32_t IdleState; - uint32_t AltSetting; - HID_StateTypeDef state; -} -USBD_HID_HandleTypeDef; -/** - * @} - */ - - - -/** @defgroup USBD_CORE_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup USBD_CORE_Exported_Variables - * @{ - */ - -extern USBD_ClassTypeDef USBD_HID; -#define USBD_HID_CLASS &USBD_HID -/** - * @} - */ - -/** @defgroup USB_CORE_Exported_Functions - * @{ - */ -uint8_t USBD_HID_SendReport (USBD_HandleTypeDef *pdev, - uint8_t *report, - uint16_t len); - -uint32_t USBD_HID_GetPollingInterval (USBD_HandleTypeDef *pdev); - - -/** user redifinable */ -void USBD_HID_GetReport(uint8_t * OutData, int len); -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __USB_HID_H */ -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit