From 6ab94e0b318884bbcb95e2ea3835f951502e1d99 Mon Sep 17 00:00:00 2001
From: jaseg <git@jaseg.net>
Date: Wed, 14 Oct 2020 12:47:28 +0200
Subject: Move firmware into subdirectory

---
 fw/hid-dials/Inc/usbd_hid.h | 193 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 193 insertions(+)
 create mode 100644 fw/hid-dials/Inc/usbd_hid.h

(limited to 'fw/hid-dials/Inc/usbd_hid.h')

diff --git a/fw/hid-dials/Inc/usbd_hid.h b/fw/hid-dials/Inc/usbd_hid.h
new file mode 100644
index 0000000..fa2f0a2
--- /dev/null
+++ b/fw/hid-dials/Inc/usbd_hid.h
@@ -0,0 +1,193 @@
+/**
+  ******************************************************************************
+  * @file    usbd_hid.h
+  * @author  MCD Application Team
+  * @version V2.4.2
+  * @date    11-December-2015
+  * @brief   Header file for the usbd_hid_core.c file.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
+  *
+  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+  * You may not use this file except in compliance with the License.
+  * You may obtain a copy of the License at:
+  *
+  *        http://www.st.com/software_license_agreement_liberty_v2
+  *
+  * Unless required by applicable law or agreed to in writing, software 
+  * distributed under the License is distributed on an "AS IS" BASIS, 
+  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  * See the License for the specific language governing permissions and
+  * limitations under the License.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_HID_H
+#define __USB_HID_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include  "usbd_ioreq.h"
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+  * @{
+  */
+  
+/** @defgroup USBD_HID
+  * @brief This file is the Header file for usbd_hid.c
+  * @{
+  */ 
+
+/** set this to 0/1 if to have led or not
+ * it can be defined in the build configuraton symbol */
+#ifndef  HID_LED_SUPPORT
+#   define HID_LED_SUPPORT 0
+#endif
+
+ /**  define  VOLUME_REPORT  to tehr eport ID to use for volume or 0 if not support*/
+#define  HID_MEDIA_REPORT  2
+#ifdef   HID_MEDIA_REPORT
+#   define HID_MEDIA_SIZE    25
+#else
+#   define HID_MEDIA_SIZE   0
+#endif
+
+#if HID_MEDIA_REPORT == 1
+#     error "volume report can't be 1 already sued for stad report"
+#endif
+
+/** @defgroup USBD_HID_Exported_Defines
+  * @{
+  */ 
+#define HID_EPIN_ADDR                 0x81
+
+#define HID_EPOUT_ADDR                0x01
+#define HID_EPOUT_SIZE                0x08
+
+#define HID_EPIN_SIZE                 16
+
+ #if  HID_LED_SUPPORT
+#   define CFG_ADD_SIZE                  7 /* one ep */
+#   define HID_NUM_EP   2
+#else
+#   define CFG_ADD_SIZE                  0
+#   define HID_NUM_EP   1
+#endif
+
+#define USB_HID_CONFIG_DESC_SIZ       (34+CFG_ADD_SIZE)
+
+#define USB_HID_DESC_SIZ              9
+
+
+
+#if HID_LED_SUPPORT
+#   define HID_LED_SIZE    18
+#else
+#   define HID_LED_SIZE    0
+#endif
+
+
+
+#define HID_REPORT_DESC_SIZE    104
+
+
+#define HID_DESCRIPTOR_TYPE           0x21
+#define HID_REPORT_DESC               0x22
+
+#define HID_HS_BINTERVAL               0x07
+#define HID_FS_BINTERVAL               0x0A
+#define HID_POLLING_INTERVAL           0x0A
+
+#define HID_REQ_SET_PROTOCOL          0x0B
+#define HID_REQ_GET_PROTOCOL          0x03
+
+#define HID_REQ_SET_IDLE              0x0A
+#define HID_REQ_GET_IDLE              0x02
+
+#define HID_REQ_SET_REPORT            0x09
+#define HID_REQ_GET_REPORT            0x01
+/**
+  * @}
+  */ 
+
+
+/** @defgroup USBD_CORE_Exported_TypesDefinitions
+  * @{
+  */
+typedef enum
+{
+  HID_IDLE = 0,
+  HID_BUSY,
+}
+HID_StateTypeDef; 
+
+
+typedef struct
+{
+  uint32_t             Protocol;   
+  uint32_t             IdleState;  
+  uint32_t             AltSetting;
+  HID_StateTypeDef     state;  
+}
+USBD_HID_HandleTypeDef; 
+/**
+  * @}
+  */ 
+
+
+
+/** @defgroup USBD_CORE_Exported_Macros
+  * @{
+  */ 
+
+/**
+  * @}
+  */ 
+
+/** @defgroup USBD_CORE_Exported_Variables
+  * @{
+  */ 
+
+extern USBD_ClassTypeDef  USBD_HID;
+#define USBD_HID_CLASS    &USBD_HID
+/**
+  * @}
+  */ 
+
+/** @defgroup USB_CORE_Exported_Functions
+  * @{
+  */ 
+uint8_t USBD_HID_SendReport (USBD_HandleTypeDef *pdev, 
+                                 uint8_t *report,
+                                 uint16_t len);
+
+uint32_t USBD_HID_GetPollingInterval (USBD_HandleTypeDef *pdev);
+
+
+/** user redifinable */
+void USBD_HID_GetReport(uint8_t * OutData, int len);
+/**
+  * @}
+  */ 
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif  /* __USB_HID_H */
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+  
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-- 
cgit