From d8b6d18d2fefee381eb6a26334a13e94126b6d8e Mon Sep 17 00:00:00 2001 From: jaseg Date: Mon, 21 Dec 2020 16:22:11 +0100 Subject: Remove obsolete template code from fw --- .../STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_gpio.c | 280 --------------------- 1 file changed, 280 deletions(-) delete mode 100644 fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_gpio.c (limited to 'fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_gpio.c') diff --git a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_gpio.c b/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_gpio.c deleted file mode 100644 index d4c0585..0000000 --- a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_gpio.c +++ /dev/null @@ -1,280 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f0xx_ll_gpio.c - * @author MCD Application Team - * @brief GPIO LL module driver. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -#if defined(USE_FULL_LL_DRIVER) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f0xx_ll_gpio.h" -#include "stm32f0xx_ll_bus.h" -#ifdef USE_FULL_ASSERT -#include "stm32_assert.h" -#else -#define assert_param(expr) ((void)0U) -#endif - -/** @addtogroup STM32F0xx_LL_Driver - * @{ - */ - -#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) - -/** @addtogroup GPIO_LL - * @{ - */ -/** MISRA C:2012 deviation rule has been granted for following rules: - * Rule-12.2 - Medium: RHS argument is in interval [0,INF] which is out of - * range of the shift operator in following API : - * LL_GPIO_Init - * LL_GPIO_DeInit - * LL_GPIO_SetPinMode - * LL_GPIO_GetPinMode - * LL_GPIO_SetPinSpeed - * LL_GPIO_GetPinSpeed - * LL_GPIO_SetPinPull - * LL_GPIO_GetPinPull - * LL_GPIO_GetAFPin_0_7 - * LL_GPIO_SetAFPin_0_7 - * LL_GPIO_SetAFPin_8_15 - * LL_GPIO_GetAFPin_8_15 - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/** @addtogroup GPIO_LL_Private_Macros - * @{ - */ -#define IS_LL_GPIO_PIN(__VALUE__) (((0x00u) < (__VALUE__)) && ((__VALUE__) <= (LL_GPIO_PIN_ALL))) - -#define IS_LL_GPIO_MODE(__VALUE__) (((__VALUE__) == LL_GPIO_MODE_INPUT) ||\ - ((__VALUE__) == LL_GPIO_MODE_OUTPUT) ||\ - ((__VALUE__) == LL_GPIO_MODE_ALTERNATE) ||\ - ((__VALUE__) == LL_GPIO_MODE_ANALOG)) - -#define IS_LL_GPIO_OUTPUT_TYPE(__VALUE__) (((__VALUE__) == LL_GPIO_OUTPUT_PUSHPULL) ||\ - ((__VALUE__) == LL_GPIO_OUTPUT_OPENDRAIN)) - -#define IS_LL_GPIO_SPEED(__VALUE__) (((__VALUE__) == LL_GPIO_SPEED_FREQ_LOW) ||\ - ((__VALUE__) == LL_GPIO_SPEED_FREQ_MEDIUM) ||\ - ((__VALUE__) == LL_GPIO_SPEED_FREQ_HIGH)) - -#define IS_LL_GPIO_PULL(__VALUE__) (((__VALUE__) == LL_GPIO_PULL_NO) ||\ - ((__VALUE__) == LL_GPIO_PULL_UP) ||\ - ((__VALUE__) == LL_GPIO_PULL_DOWN)) - -#define IS_LL_GPIO_ALTERNATE(__VALUE__) (((__VALUE__) == LL_GPIO_AF_0 ) ||\ - ((__VALUE__) == LL_GPIO_AF_1 ) ||\ - ((__VALUE__) == LL_GPIO_AF_2 ) ||\ - ((__VALUE__) == LL_GPIO_AF_3 ) ||\ - ((__VALUE__) == LL_GPIO_AF_4 ) ||\ - ((__VALUE__) == LL_GPIO_AF_5 ) ||\ - ((__VALUE__) == LL_GPIO_AF_6 ) ||\ - ((__VALUE__) == LL_GPIO_AF_7 )) -/** - * @} - */ - -/* Private function prototypes -----------------------------------------------*/ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup GPIO_LL_Exported_Functions - * @{ - */ - -/** @addtogroup GPIO_LL_EF_Init - * @{ - */ - -/** - * @brief De-initialize GPIO registers (Registers restored to their default values). - * @param GPIOx GPIO Port - * @retval An ErrorStatus enumeration value: - * - SUCCESS: GPIO registers are de-initialized - * - ERROR: Wrong GPIO Port - */ -ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx) -{ - ErrorStatus status = SUCCESS; - - /* Check the parameters */ - assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); - - /* Force and Release reset on clock of GPIOx Port */ - if (GPIOx == GPIOA) - { - LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOA); - LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOA); - } - else if (GPIOx == GPIOB) - { - LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOB); - LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOB); - } - else if (GPIOx == GPIOC) - { - LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOC); - LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOC); - } -#if defined(GPIOD) - else if (GPIOx == GPIOD) - { - LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOD); - LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOD); - } -#endif /* GPIOD */ -#if defined(GPIOE) - else if (GPIOx == GPIOE) - { - LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOE); - LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOE); - } -#endif /* GPIOE */ -#if defined(GPIOF) - else if (GPIOx == GPIOF) - { - LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOF); - LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOF); - } -#endif /* GPIOF */ - else - { - status = ERROR; - } - - return (status); -} - -/** - * @brief Initialize GPIO registers according to the specified parameters in GPIO_InitStruct. - * @param GPIOx GPIO Port - * @param GPIO_InitStruct pointer to a @ref LL_GPIO_InitTypeDef structure - * that contains the configuration information for the specified GPIO peripheral. - * @retval An ErrorStatus enumeration value: - * - SUCCESS: GPIO registers are initialized according to GPIO_InitStruct content - * - ERROR: Not applicable - */ -ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct) -{ - uint32_t pinpos; - uint32_t currentpin; - - /* Check the parameters */ - assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); - assert_param(IS_LL_GPIO_PIN(GPIO_InitStruct->Pin)); - assert_param(IS_LL_GPIO_MODE(GPIO_InitStruct->Mode)); - assert_param(IS_LL_GPIO_PULL(GPIO_InitStruct->Pull)); - - /* ------------------------- Configure the port pins ---------------- */ - /* Initialize pinpos on first pin set */ - pinpos = 0; - - /* Configure the port pins */ - while (((GPIO_InitStruct->Pin) >> pinpos) != 0x00u) - { - /* Get current io position */ - currentpin = (GPIO_InitStruct->Pin) & (0x00000001uL << pinpos); - - if (currentpin != 0x00u) - { - /* Pin Mode configuration */ - LL_GPIO_SetPinMode(GPIOx, currentpin, GPIO_InitStruct->Mode); - - if ((GPIO_InitStruct->Mode == LL_GPIO_MODE_OUTPUT) || (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE)) - { - /* Check Speed mode parameters */ - assert_param(IS_LL_GPIO_SPEED(GPIO_InitStruct->Speed)); - - /* Speed mode configuration */ - LL_GPIO_SetPinSpeed(GPIOx, currentpin, GPIO_InitStruct->Speed); - } - - /* Pull-up Pull down resistor configuration*/ - LL_GPIO_SetPinPull(GPIOx, currentpin, GPIO_InitStruct->Pull); - - if (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE) - { - /* Check Alternate parameter */ - assert_param(IS_LL_GPIO_ALTERNATE(GPIO_InitStruct->Alternate)); - - /* Speed mode configuration */ - if (currentpin < LL_GPIO_PIN_8) - { - LL_GPIO_SetAFPin_0_7(GPIOx, currentpin, GPIO_InitStruct->Alternate); - } - else - { - LL_GPIO_SetAFPin_8_15(GPIOx, currentpin, GPIO_InitStruct->Alternate); - } - } - } - pinpos++; - } - - if ((GPIO_InitStruct->Mode == LL_GPIO_MODE_OUTPUT) || (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE)) - { - /* Check Output mode parameters */ - assert_param(IS_LL_GPIO_OUTPUT_TYPE(GPIO_InitStruct->OutputType)); - - /* Output mode configuration*/ - LL_GPIO_SetPinOutputType(GPIOx, GPIO_InitStruct->Pin, GPIO_InitStruct->OutputType); - - } - return (SUCCESS); -} - -/** - * @brief Set each @ref LL_GPIO_InitTypeDef field to default value. - * @param GPIO_InitStruct pointer to a @ref LL_GPIO_InitTypeDef structure - * whose fields will be set to default values. - * @retval None - */ - -void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct) -{ - /* Reset GPIO init structure parameters values */ - GPIO_InitStruct->Pin = LL_GPIO_PIN_ALL; - GPIO_InitStruct->Mode = LL_GPIO_MODE_ANALOG; - GPIO_InitStruct->Speed = LL_GPIO_SPEED_FREQ_LOW; - GPIO_InitStruct->OutputType = LL_GPIO_OUTPUT_PUSHPULL; - GPIO_InitStruct->Pull = LL_GPIO_PULL_NO; - GPIO_InitStruct->Alternate = LL_GPIO_AF_0; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) */ - -/** - * @} - */ - -#endif /* USE_FULL_LL_DRIVER */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit