From 6ab94e0b318884bbcb95e2ea3835f951502e1d99 Mon Sep 17 00:00:00 2001 From: jaseg Date: Wed, 14 Oct 2020 12:47:28 +0200 Subject: Move firmware into subdirectory --- .../STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_comp.c | 316 +++++++++++++++++++++ 1 file changed, 316 insertions(+) create mode 100644 fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_comp.c (limited to 'fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_comp.c') diff --git a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_comp.c b/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_comp.c new file mode 100644 index 0000000..a108f40 --- /dev/null +++ b/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_comp.c @@ -0,0 +1,316 @@ +/** + ****************************************************************************** + * @file stm32f0xx_ll_comp.c + * @author MCD Application Team + * @brief COMP LL module driver + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_ll_comp.h" + +#ifdef USE_FULL_ASSERT + #include "stm32_assert.h" +#else + #define assert_param(expr) ((void)0U) +#endif + +/** @addtogroup STM32F0xx_LL_Driver + * @{ + */ + +#if defined (COMP1) || defined (COMP2) + +/** @addtogroup COMP_LL COMP + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/** @addtogroup COMP_LL_Private_Macros + * @{ + */ + +/* Check of parameters for configuration of COMP hierarchical scope: */ +/* COMP instance. */ + +#define IS_LL_COMP_POWER_MODE(__POWER_MODE__) \ + ( ((__POWER_MODE__) == LL_COMP_POWERMODE_HIGHSPEED) \ + || ((__POWER_MODE__) == LL_COMP_POWERMODE_MEDIUMSPEED) \ + || ((__POWER_MODE__) == LL_COMP_POWERMODE_LOWPOWER) \ + || ((__POWER_MODE__) == LL_COMP_POWERMODE_ULTRALOWPOWER) \ + ) + +/* Note: On this STM32 serie, comparator input plus parameters are */ +/* the different depending on COMP instances. */ +#define IS_LL_COMP_INPUT_PLUS(__COMP_INSTANCE__, __INPUT_PLUS__) \ + (((__COMP_INSTANCE__) == COMP1) \ + ? ( \ + ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO1) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_DAC1_CH1) \ + ) \ + : \ + ( \ + ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO1) \ + ) \ + ) + +/* Note: On this STM32 serie, comparator input minus parameters are */ +/* the same on all COMP instances. */ +/* However, comparator instance kept as macro parameter for */ +/* compatibility with other STM32 families. */ +#define IS_LL_COMP_INPUT_MINUS(__COMP_INSTANCE__, __INPUT_MINUS__) \ + ( ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_1_4VREFINT) \ + || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_1_2VREFINT) \ + || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_3_4VREFINT) \ + || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_VREFINT) \ + || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_DAC1_CH1) \ + || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_DAC1_CH2) \ + || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_IO1) \ + ) + +#define IS_LL_COMP_INPUT_HYSTERESIS(__INPUT_HYSTERESIS__) \ + ( ((__INPUT_HYSTERESIS__) == LL_COMP_HYSTERESIS_NONE) \ + || ((__INPUT_HYSTERESIS__) == LL_COMP_HYSTERESIS_LOW) \ + || ((__INPUT_HYSTERESIS__) == LL_COMP_HYSTERESIS_MEDIUM) \ + || ((__INPUT_HYSTERESIS__) == LL_COMP_HYSTERESIS_HIGH) \ + ) + +#define IS_LL_COMP_OUTPUT_SELECTION(__OUTPUT_SELECTION__) \ + ( ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_NONE) \ + || ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_TIM1_BKIN) \ + || ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_TIM1_IC1) \ + || ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_TIM1_OCCLR) \ + || ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_TIM2_IC4) \ + || ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_TIM2_OCCLR) \ + || ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_TIM3_IC1) \ + || ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_TIM3_OCCLR) \ + ) + +#define IS_LL_COMP_OUTPUT_POLARITY(__POLARITY__) \ + ( ((__POLARITY__) == LL_COMP_OUTPUTPOL_NONINVERTED) \ + || ((__POLARITY__) == LL_COMP_OUTPUTPOL_INVERTED) \ + ) + +/** + * @} + */ + + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup COMP_LL_Exported_Functions + * @{ + */ + +/** @addtogroup COMP_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize registers of the selected COMP instance + * to their default reset values. + * @note If comparator is locked, de-initialization by software is + * not possible. + * The only way to unlock the comparator is a device hardware reset. + * @param COMPx COMP instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: COMP registers are de-initialized + * - ERROR: COMP registers are not de-initialized + */ +ErrorStatus LL_COMP_DeInit(COMP_TypeDef *COMPx) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_COMP_ALL_INSTANCE(COMPx)); + + /* Note: Hardware constraint (refer to description of this function): */ + /* COMP instance must not be locked. */ + if(LL_COMP_IsLocked(COMPx) == 0U) + { + /* Note: Connection switch is applicable only to COMP instance COMP1, */ + /* therefore is COMP2 is selected the equivalent bit is */ + /* kept unmodified. */ + if(COMPx == COMP1) + { + CLEAR_BIT(COMP->CSR, + ( COMP_CSR_COMP1MODE + | COMP_CSR_COMP1INSEL + | COMP_CSR_COMP1SW1 + | COMP_CSR_COMP1OUTSEL + | COMP_CSR_COMP1HYST + | COMP_CSR_COMP1POL + | COMP_CSR_COMP1EN + ) << __COMP_BITOFFSET_INSTANCE(COMPx) + ); + } + else + { + CLEAR_BIT(COMP->CSR, + ( COMP_CSR_COMP1MODE + | COMP_CSR_COMP1INSEL + | COMP_CSR_COMP1OUTSEL + | COMP_CSR_COMP1HYST + | COMP_CSR_COMP1POL + | COMP_CSR_COMP1EN + ) << __COMP_BITOFFSET_INSTANCE(COMPx) + ); + } + + } + else + { + /* Comparator instance is locked: de-initialization by software is */ + /* not possible. */ + /* The only way to unlock the comparator is a device hardware reset. */ + status = ERROR; + } + + return status; +} + +/** + * @brief Initialize some features of COMP instance. + * @note This function configures features of the selected COMP instance. + * Some features are also available at scope COMP common instance + * (common to several COMP instances). + * Refer to functions having argument "COMPxy_COMMON" as parameter. + * @param COMPx COMP instance + * @param COMP_InitStruct Pointer to a @ref LL_COMP_InitTypeDef structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: COMP registers are initialized + * - ERROR: COMP registers are not initialized + */ +ErrorStatus LL_COMP_Init(COMP_TypeDef *COMPx, LL_COMP_InitTypeDef *COMP_InitStruct) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_COMP_ALL_INSTANCE(COMPx)); + assert_param(IS_LL_COMP_POWER_MODE(COMP_InitStruct->PowerMode)); + assert_param(IS_LL_COMP_INPUT_PLUS(COMPx, COMP_InitStruct->InputPlus)); + assert_param(IS_LL_COMP_INPUT_MINUS(COMPx, COMP_InitStruct->InputMinus)); + assert_param(IS_LL_COMP_INPUT_HYSTERESIS(COMP_InitStruct->InputHysteresis)); + assert_param(IS_LL_COMP_OUTPUT_SELECTION(COMP_InitStruct->OutputSelection)); + assert_param(IS_LL_COMP_OUTPUT_POLARITY(COMP_InitStruct->OutputPolarity)); + + /* Note: Hardware constraint (refer to description of this function) */ + /* COMP instance must not be locked. */ + if(LL_COMP_IsLocked(COMPx) == 0U) + { + /* Configuration of comparator instance : */ + /* - PowerMode */ + /* - InputPlus */ + /* - InputMinus */ + /* - InputHysteresis */ + /* - OutputSelection */ + /* - OutputPolarity */ + /* Note: Connection switch is applicable only to COMP instance COMP1, */ + /* therefore is COMP2 is selected the equivalent bit is */ + /* kept unmodified. */ + if(COMPx == COMP1) + { + MODIFY_REG(COMP->CSR, + ( COMP_CSR_COMP1MODE + | COMP_CSR_COMP1INSEL + | COMP_CSR_COMP1SW1 + | COMP_CSR_COMP1OUTSEL + | COMP_CSR_COMP1HYST + | COMP_CSR_COMP1POL + ) << __COMP_BITOFFSET_INSTANCE(COMPx) + , + ( COMP_InitStruct->PowerMode + | COMP_InitStruct->InputPlus + | COMP_InitStruct->InputMinus + | COMP_InitStruct->InputHysteresis + | COMP_InitStruct->OutputSelection + | COMP_InitStruct->OutputPolarity + ) << __COMP_BITOFFSET_INSTANCE(COMPx) + ); + } + else + { + MODIFY_REG(COMP->CSR, + ( COMP_CSR_COMP1MODE + | COMP_CSR_COMP1INSEL + | COMP_CSR_COMP1OUTSEL + | COMP_CSR_COMP1HYST + | COMP_CSR_COMP1POL + ) << __COMP_BITOFFSET_INSTANCE(COMPx) + , + ( COMP_InitStruct->PowerMode + | COMP_InitStruct->InputPlus + | COMP_InitStruct->InputMinus + | COMP_InitStruct->InputHysteresis + | COMP_InitStruct->OutputSelection + | COMP_InitStruct->OutputPolarity + ) << __COMP_BITOFFSET_INSTANCE(COMPx) + ); + } + + } + else + { + /* Initialization error: COMP instance is locked. */ + status = ERROR; + } + + return status; +} + +/** + * @brief Set each @ref LL_COMP_InitTypeDef field to default value. + * @param COMP_InitStruct pointer to a @ref LL_COMP_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_COMP_StructInit(LL_COMP_InitTypeDef *COMP_InitStruct) +{ + /* Set COMP_InitStruct fields to default values */ + COMP_InitStruct->PowerMode = LL_COMP_POWERMODE_ULTRALOWPOWER; + COMP_InitStruct->InputPlus = LL_COMP_INPUT_PLUS_IO1; + COMP_InitStruct->InputMinus = LL_COMP_INPUT_MINUS_VREFINT; + COMP_InitStruct->InputHysteresis = LL_COMP_HYSTERESIS_NONE; + COMP_InitStruct->OutputSelection = LL_COMP_OUTPUT_NONE; + COMP_InitStruct->OutputPolarity = LL_COMP_OUTPUTPOL_NONINVERTED; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* COMP1 || COMP2 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit