From d8b6d18d2fefee381eb6a26334a13e94126b6d8e Mon Sep 17 00:00:00 2001 From: jaseg Date: Mon, 21 Dec 2020 16:22:11 +0100 Subject: Remove obsolete template code from fw --- .../STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pcd.c | 1869 -------------------- 1 file changed, 1869 deletions(-) delete mode 100644 fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pcd.c (limited to 'fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pcd.c') diff --git a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pcd.c b/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pcd.c deleted file mode 100644 index f94a7b5..0000000 --- a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pcd.c +++ /dev/null @@ -1,1869 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f0xx_hal_pcd.c - * @author MCD Application Team - * @brief PCD HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the USB Peripheral Controller: - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral Control functions - * + Peripheral State functions - * - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The PCD HAL driver can be used as follows: - - (#) Declare a PCD_HandleTypeDef handle structure, for example: - PCD_HandleTypeDef hpcd; - - (#) Fill parameters of Init structure in HCD handle - - (#) Call HAL_PCD_Init() API to initialize the PCD peripheral (Core, Device core, ...) - - (#) Initialize the PCD low level resources through the HAL_PCD_MspInit() API: - (##) Enable the PCD/USB Low Level interface clock using - (+++) __HAL_RCC_USB_CLK_ENABLE(); For USB Device only FS peripheral - - (##) Initialize the related GPIO clocks - (##) Configure PCD pin-out - (##) Configure PCD NVIC interrupt - - (#)Associate the Upper USB device stack to the HAL PCD Driver: - (##) hpcd.pData = pdev; - - (#)Enable PCD transmission and reception: - (##) HAL_PCD_Start(); - - @endverbatim - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f0xx_hal.h" - -/** @addtogroup STM32F0xx_HAL_Driver - * @{ - */ - -/** @defgroup PCD PCD - * @brief PCD HAL module driver - * @{ - */ - -#ifdef HAL_PCD_MODULE_ENABLED - -#if defined (USB) - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/** @defgroup PCD_Private_Macros PCD Private Macros - * @{ - */ -#define PCD_MIN(a, b) (((a) < (b)) ? (a) : (b)) -#define PCD_MAX(a, b) (((a) > (b)) ? (a) : (b)) -/** - * @} - */ - -/* Private functions prototypes ----------------------------------------------*/ -/** @defgroup PCD_Private_Functions PCD Private Functions - * @{ - */ - -static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd); - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup PCD_Exported_Functions PCD Exported Functions - * @{ - */ - -/** @defgroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] This section provides functions allowing to: - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the PCD according to the specified - * parameters in the PCD_InitTypeDef and initialize the associated handle. - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd) -{ - uint8_t i; - - /* Check the PCD handle allocation */ - if (hpcd == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_PCD_ALL_INSTANCE(hpcd->Instance)); - - if (hpcd->State == HAL_PCD_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hpcd->Lock = HAL_UNLOCKED; - -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->SOFCallback = HAL_PCD_SOFCallback; - hpcd->SetupStageCallback = HAL_PCD_SetupStageCallback; - hpcd->ResetCallback = HAL_PCD_ResetCallback; - hpcd->SuspendCallback = HAL_PCD_SuspendCallback; - hpcd->ResumeCallback = HAL_PCD_ResumeCallback; - hpcd->ConnectCallback = HAL_PCD_ConnectCallback; - hpcd->DisconnectCallback = HAL_PCD_DisconnectCallback; - hpcd->DataOutStageCallback = HAL_PCD_DataOutStageCallback; - hpcd->DataInStageCallback = HAL_PCD_DataInStageCallback; - hpcd->ISOOUTIncompleteCallback = HAL_PCD_ISOOUTIncompleteCallback; - hpcd->ISOINIncompleteCallback = HAL_PCD_ISOINIncompleteCallback; - hpcd->LPMCallback = HAL_PCDEx_LPM_Callback; - hpcd->BCDCallback = HAL_PCDEx_BCD_Callback; - - if (hpcd->MspInitCallback == NULL) - { - hpcd->MspInitCallback = HAL_PCD_MspInit; - } - - /* Init the low level hardware */ - hpcd->MspInitCallback(hpcd); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC... */ - HAL_PCD_MspInit(hpcd); -#endif /* (USE_HAL_PCD_REGISTER_CALLBACKS) */ - } - - hpcd->State = HAL_PCD_STATE_BUSY; - - /* Disable the Interrupts */ - __HAL_PCD_DISABLE(hpcd); - - /* Init endpoints structures */ - for (i = 0U; i < hpcd->Init.dev_endpoints; i++) - { - /* Init ep structure */ - hpcd->IN_ep[i].is_in = 1U; - hpcd->IN_ep[i].num = i; - hpcd->IN_ep[i].tx_fifo_num = i; - /* Control until ep is activated */ - hpcd->IN_ep[i].type = EP_TYPE_CTRL; - hpcd->IN_ep[i].maxpacket = 0U; - hpcd->IN_ep[i].xfer_buff = 0U; - hpcd->IN_ep[i].xfer_len = 0U; - } - - for (i = 0U; i < hpcd->Init.dev_endpoints; i++) - { - hpcd->OUT_ep[i].is_in = 0U; - hpcd->OUT_ep[i].num = i; - /* Control until ep is activated */ - hpcd->OUT_ep[i].type = EP_TYPE_CTRL; - hpcd->OUT_ep[i].maxpacket = 0U; - hpcd->OUT_ep[i].xfer_buff = 0U; - hpcd->OUT_ep[i].xfer_len = 0U; - } - - /* Init Device */ - (void)USB_DevInit(hpcd->Instance, hpcd->Init); - - hpcd->USB_Address = 0U; - hpcd->State = HAL_PCD_STATE_READY; - - /* Activate LPM */ - if (hpcd->Init.lpm_enable == 1U) - { - (void)HAL_PCDEx_ActivateLPM(hpcd); - } - - return HAL_OK; -} - -/** - * @brief DeInitializes the PCD peripheral. - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd) -{ - /* Check the PCD handle allocation */ - if (hpcd == NULL) - { - return HAL_ERROR; - } - - hpcd->State = HAL_PCD_STATE_BUSY; - - /* Stop Device */ - (void)HAL_PCD_Stop(hpcd); - -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - if (hpcd->MspDeInitCallback == NULL) - { - hpcd->MspDeInitCallback = HAL_PCD_MspDeInit; /* Legacy weak MspDeInit */ - } - - /* DeInit the low level hardware */ - hpcd->MspDeInitCallback(hpcd); -#else - /* DeInit the low level hardware: CLOCK, NVIC.*/ - HAL_PCD_MspDeInit(hpcd); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - - hpcd->State = HAL_PCD_STATE_RESET; - - return HAL_OK; -} - -/** - * @brief Initializes the PCD MSP. - * @param hpcd PCD handle - * @retval None - */ -__weak void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes PCD MSP. - * @param hpcd PCD handle - * @retval None - */ -__weak void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_MspDeInit could be implemented in the user file - */ -} - -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) -/** - * @brief Register a User USB PCD Callback - * To be used instead of the weak predefined callback - * @param hpcd USB PCD handle - * @param CallbackID ID of the callback to be registered - * This parameter can be one of the following values: - * @arg @ref HAL_PCD_SOF_CB_ID USB PCD SOF callback ID - * @arg @ref HAL_PCD_SETUPSTAGE_CB_ID USB PCD Setup callback ID - * @arg @ref HAL_PCD_RESET_CB_ID USB PCD Reset callback ID - * @arg @ref HAL_PCD_SUSPEND_CB_ID USB PCD Suspend callback ID - * @arg @ref HAL_PCD_RESUME_CB_ID USB PCD Resume callback ID - * @arg @ref HAL_PCD_CONNECT_CB_ID USB PCD Connect callback ID - * @arg @ref HAL_PCD_DISCONNECT_CB_ID OTG PCD Disconnect callback ID - * @arg @ref HAL_PCD_MSPINIT_CB_ID MspDeInit callback ID - * @arg @ref HAL_PCD_MSPDEINIT_CB_ID MspDeInit callback ID - * @param pCallback pointer to the Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID, pPCD_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - switch (CallbackID) - { - case HAL_PCD_SOF_CB_ID : - hpcd->SOFCallback = pCallback; - break; - - case HAL_PCD_SETUPSTAGE_CB_ID : - hpcd->SetupStageCallback = pCallback; - break; - - case HAL_PCD_RESET_CB_ID : - hpcd->ResetCallback = pCallback; - break; - - case HAL_PCD_SUSPEND_CB_ID : - hpcd->SuspendCallback = pCallback; - break; - - case HAL_PCD_RESUME_CB_ID : - hpcd->ResumeCallback = pCallback; - break; - - case HAL_PCD_CONNECT_CB_ID : - hpcd->ConnectCallback = pCallback; - break; - - case HAL_PCD_DISCONNECT_CB_ID : - hpcd->DisconnectCallback = pCallback; - break; - - case HAL_PCD_MSPINIT_CB_ID : - hpcd->MspInitCallback = pCallback; - break; - - case HAL_PCD_MSPDEINIT_CB_ID : - hpcd->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (hpcd->State == HAL_PCD_STATE_RESET) - { - switch (CallbackID) - { - case HAL_PCD_MSPINIT_CB_ID : - hpcd->MspInitCallback = pCallback; - break; - - case HAL_PCD_MSPDEINIT_CB_ID : - hpcd->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - return status; -} - -/** - * @brief Unregister an USB PCD Callback - * USB PCD callabck is redirected to the weak predefined callback - * @param hpcd USB PCD handle - * @param CallbackID ID of the callback to be unregistered - * This parameter can be one of the following values: - * @arg @ref HAL_PCD_SOF_CB_ID USB PCD SOF callback ID - * @arg @ref HAL_PCD_SETUPSTAGE_CB_ID USB PCD Setup callback ID - * @arg @ref HAL_PCD_RESET_CB_ID USB PCD Reset callback ID - * @arg @ref HAL_PCD_SUSPEND_CB_ID USB PCD Suspend callback ID - * @arg @ref HAL_PCD_RESUME_CB_ID USB PCD Resume callback ID - * @arg @ref HAL_PCD_CONNECT_CB_ID USB PCD Connect callback ID - * @arg @ref HAL_PCD_DISCONNECT_CB_ID OTG PCD Disconnect callback ID - * @arg @ref HAL_PCD_MSPINIT_CB_ID MspDeInit callback ID - * @arg @ref HAL_PCD_MSPDEINIT_CB_ID MspDeInit callback ID - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hpcd); - - /* Setup Legacy weak Callbacks */ - if (hpcd->State == HAL_PCD_STATE_READY) - { - switch (CallbackID) - { - case HAL_PCD_SOF_CB_ID : - hpcd->SOFCallback = HAL_PCD_SOFCallback; - break; - - case HAL_PCD_SETUPSTAGE_CB_ID : - hpcd->SetupStageCallback = HAL_PCD_SetupStageCallback; - break; - - case HAL_PCD_RESET_CB_ID : - hpcd->ResetCallback = HAL_PCD_ResetCallback; - break; - - case HAL_PCD_SUSPEND_CB_ID : - hpcd->SuspendCallback = HAL_PCD_SuspendCallback; - break; - - case HAL_PCD_RESUME_CB_ID : - hpcd->ResumeCallback = HAL_PCD_ResumeCallback; - break; - - case HAL_PCD_CONNECT_CB_ID : - hpcd->ConnectCallback = HAL_PCD_ConnectCallback; - break; - - case HAL_PCD_DISCONNECT_CB_ID : - hpcd->DisconnectCallback = HAL_PCD_DisconnectCallback; - break; - - case HAL_PCD_MSPINIT_CB_ID : - hpcd->MspInitCallback = HAL_PCD_MspInit; - break; - - case HAL_PCD_MSPDEINIT_CB_ID : - hpcd->MspDeInitCallback = HAL_PCD_MspDeInit; - break; - - default : - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (hpcd->State == HAL_PCD_STATE_RESET) - { - switch (CallbackID) - { - case HAL_PCD_MSPINIT_CB_ID : - hpcd->MspInitCallback = HAL_PCD_MspInit; - break; - - case HAL_PCD_MSPDEINIT_CB_ID : - hpcd->MspDeInitCallback = HAL_PCD_MspDeInit; - break; - - default : - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - return status; -} - -/** - * @brief Register USB PCD Data OUT Stage Callback - * To be used instead of the weak HAL_PCD_DataOutStageCallback() predefined callback - * @param hpcd PCD handle - * @param pCallback pointer to the USB PCD Data OUT Stage Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, pPCD_DataOutStageCallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->DataOutStageCallback = pCallback; - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} - -/** - * @brief UnRegister the USB PCD Data OUT Stage Callback - * USB PCD Data OUT Stage Callback is redirected to the weak HAL_PCD_DataOutStageCallback() predefined callback - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_UnRegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->DataOutStageCallback = HAL_PCD_DataOutStageCallback; /* Legacy weak DataOutStageCallback */ - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} - -/** - * @brief Register USB PCD Data IN Stage Callback - * To be used instead of the weak HAL_PCD_DataInStageCallback() predefined callback - * @param hpcd PCD handle - * @param pCallback pointer to the USB PCD Data IN Stage Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, pPCD_DataInStageCallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->DataInStageCallback = pCallback; - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} - -/** - * @brief UnRegister the USB PCD Data IN Stage Callback - * USB PCD Data OUT Stage Callback is redirected to the weak HAL_PCD_DataInStageCallback() predefined callback - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_UnRegisterDataInStageCallback(PCD_HandleTypeDef *hpcd) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->DataInStageCallback = HAL_PCD_DataInStageCallback; /* Legacy weak DataInStageCallback */ - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} - -/** - * @brief Register USB PCD Iso OUT incomplete Callback - * To be used instead of the weak HAL_PCD_ISOOUTIncompleteCallback() predefined callback - * @param hpcd PCD handle - * @param pCallback pointer to the USB PCD Iso OUT incomplete Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, pPCD_IsoOutIncpltCallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->ISOOUTIncompleteCallback = pCallback; - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} - -/** - * @brief UnRegister the USB PCD Iso OUT incomplete Callback - * USB PCD Iso OUT incomplete Callback is redirected to the weak HAL_PCD_ISOOUTIncompleteCallback() predefined callback - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_UnRegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->ISOOUTIncompleteCallback = HAL_PCD_ISOOUTIncompleteCallback; /* Legacy weak ISOOUTIncompleteCallback */ - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} - -/** - * @brief Register USB PCD Iso IN incomplete Callback - * To be used instead of the weak HAL_PCD_ISOINIncompleteCallback() predefined callback - * @param hpcd PCD handle - * @param pCallback pointer to the USB PCD Iso IN incomplete Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, pPCD_IsoInIncpltCallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->ISOINIncompleteCallback = pCallback; - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} - -/** - * @brief UnRegister the USB PCD Iso IN incomplete Callback - * USB PCD Iso IN incomplete Callback is redirected to the weak HAL_PCD_ISOINIncompleteCallback() predefined callback - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_UnRegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->ISOINIncompleteCallback = HAL_PCD_ISOINIncompleteCallback; /* Legacy weak ISOINIncompleteCallback */ - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} - -/** - * @brief Register USB PCD BCD Callback - * To be used instead of the weak HAL_PCDEx_BCD_Callback() predefined callback - * @param hpcd PCD handle - * @param pCallback pointer to the USB PCD BCD Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_RegisterBcdCallback(PCD_HandleTypeDef *hpcd, pPCD_BcdCallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->BCDCallback = pCallback; - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} - -/** - * @brief UnRegister the USB PCD BCD Callback - * USB BCD Callback is redirected to the weak HAL_PCDEx_BCD_Callback() predefined callback - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_UnRegisterBcdCallback(PCD_HandleTypeDef *hpcd) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->BCDCallback = HAL_PCDEx_BCD_Callback; /* Legacy weak HAL_PCDEx_BCD_Callback */ - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} - -/** - * @brief Register USB PCD LPM Callback - * To be used instead of the weak HAL_PCDEx_LPM_Callback() predefined callback - * @param hpcd PCD handle - * @param pCallback pointer to the USB PCD LPM Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_RegisterLpmCallback(PCD_HandleTypeDef *hpcd, pPCD_LpmCallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->LPMCallback = pCallback; - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} - -/** - * @brief UnRegister the USB PCD LPM Callback - * USB LPM Callback is redirected to the weak HAL_PCDEx_LPM_Callback() predefined callback - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_UnRegisterLpmCallback(PCD_HandleTypeDef *hpcd) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->LPMCallback = HAL_PCDEx_LPM_Callback; /* Legacy weak HAL_PCDEx_LPM_Callback */ - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup PCD_Exported_Functions_Group2 Input and Output operation functions - * @brief Data transfers functions - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the PCD data - transfers. - -@endverbatim - * @{ - */ - -/** - * @brief Start the USB device - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd) -{ - __HAL_LOCK(hpcd); - (void)USB_DevConnect(hpcd->Instance); - __HAL_PCD_ENABLE(hpcd); - __HAL_UNLOCK(hpcd); - return HAL_OK; -} - -/** - * @brief Stop the USB device. - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd) -{ - __HAL_LOCK(hpcd); - __HAL_PCD_DISABLE(hpcd); - - (void)USB_StopDevice(hpcd->Instance); - - __HAL_UNLOCK(hpcd); - - return HAL_OK; -} - - -/** - * @brief This function handles PCD interrupt request. - * @param hpcd PCD handle - * @retval HAL status - */ -void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd) -{ - if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_CTR)) - { - /* servicing of the endpoint correct transfer interrupt */ - /* clear of the CTR flag into the sub */ - (void)PCD_EP_ISR_Handler(hpcd); - } - - if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_RESET)) - { - __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_RESET); - -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->ResetCallback(hpcd); -#else - HAL_PCD_ResetCallback(hpcd); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - - (void)HAL_PCD_SetAddress(hpcd, 0U); - } - - if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_PMAOVR)) - { - __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_PMAOVR); - } - - if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_ERR)) - { - __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_ERR); - } - - if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_WKUP)) - { - hpcd->Instance->CNTR &= (uint16_t) ~(USB_CNTR_LPMODE); - hpcd->Instance->CNTR &= (uint16_t) ~(USB_CNTR_FSUSP); - - if (hpcd->LPM_State == LPM_L1) - { - hpcd->LPM_State = LPM_L0; -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->LPMCallback(hpcd, PCD_LPM_L0_ACTIVE); -#else - HAL_PCDEx_LPM_Callback(hpcd, PCD_LPM_L0_ACTIVE); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->ResumeCallback(hpcd); -#else - HAL_PCD_ResumeCallback(hpcd); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - - __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_WKUP); - } - - if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_SUSP)) - { - /* Force low-power mode in the macrocell */ - hpcd->Instance->CNTR |= USB_CNTR_FSUSP; - - /* clear of the ISTR bit must be done after setting of CNTR_FSUSP */ - __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_SUSP); - - hpcd->Instance->CNTR |= USB_CNTR_LPMODE; - - if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_WKUP) == 0U) - { -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->SuspendCallback(hpcd); -#else - HAL_PCD_SuspendCallback(hpcd); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - } - - /* Handle LPM Interrupt */ - if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_L1REQ)) - { - __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_L1REQ); - if (hpcd->LPM_State == LPM_L0) - { - /* Force suspend and low-power mode before going to L1 state*/ - hpcd->Instance->CNTR |= USB_CNTR_LPMODE; - hpcd->Instance->CNTR |= USB_CNTR_FSUSP; - - hpcd->LPM_State = LPM_L1; - hpcd->BESL = ((uint32_t)hpcd->Instance->LPMCSR & USB_LPMCSR_BESL) >> 2; -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->LPMCallback(hpcd, PCD_LPM_L1_ACTIVE); -#else - HAL_PCDEx_LPM_Callback(hpcd, PCD_LPM_L1_ACTIVE); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - else - { -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->SuspendCallback(hpcd); -#else - HAL_PCD_SuspendCallback(hpcd); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - } - - if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_SOF)) - { - __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_SOF); - -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->SOFCallback(hpcd); -#else - HAL_PCD_SOFCallback(hpcd); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - - if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_ESOF)) - { - /* clear ESOF flag in ISTR */ - __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_ESOF); - } -} - - -/** - * @brief Data OUT stage callback. - * @param hpcd PCD handle - * @param epnum endpoint number - * @retval None - */ -__weak void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - UNUSED(epnum); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_DataOutStageCallback could be implemented in the user file - */ -} - -/** - * @brief Data IN stage callback - * @param hpcd PCD handle - * @param epnum endpoint number - * @retval None - */ -__weak void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - UNUSED(epnum); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_DataInStageCallback could be implemented in the user file - */ -} -/** - * @brief Setup stage callback - * @param hpcd PCD handle - * @retval None - */ -__weak void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_SetupStageCallback could be implemented in the user file - */ -} - -/** - * @brief USB Start Of Frame callback. - * @param hpcd PCD handle - * @retval None - */ -__weak void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_SOFCallback could be implemented in the user file - */ -} - -/** - * @brief USB Reset callback. - * @param hpcd PCD handle - * @retval None - */ -__weak void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_ResetCallback could be implemented in the user file - */ -} - -/** - * @brief Suspend event callback. - * @param hpcd PCD handle - * @retval None - */ -__weak void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_SuspendCallback could be implemented in the user file - */ -} - -/** - * @brief Resume event callback. - * @param hpcd PCD handle - * @retval None - */ -__weak void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_ResumeCallback could be implemented in the user file - */ -} - -/** - * @brief Incomplete ISO OUT callback. - * @param hpcd PCD handle - * @param epnum endpoint number - * @retval None - */ -__weak void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - UNUSED(epnum); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_ISOOUTIncompleteCallback could be implemented in the user file - */ -} - -/** - * @brief Incomplete ISO IN callback. - * @param hpcd PCD handle - * @param epnum endpoint number - * @retval None - */ -__weak void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - UNUSED(epnum); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_ISOINIncompleteCallback could be implemented in the user file - */ -} - -/** - * @brief Connection event callback. - * @param hpcd PCD handle - * @retval None - */ -__weak void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_ConnectCallback could be implemented in the user file - */ -} - -/** - * @brief Disconnection event callback. - * @param hpcd PCD handle - * @retval None - */ -__weak void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_DisconnectCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup PCD_Exported_Functions_Group3 Peripheral Control functions - * @brief management functions - * -@verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to control the PCD data - transfers. - -@endverbatim - * @{ - */ - -/** - * @brief Connect the USB device - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd) -{ - __HAL_LOCK(hpcd); - (void)USB_DevConnect(hpcd->Instance); - __HAL_UNLOCK(hpcd); - return HAL_OK; -} - -/** - * @brief Disconnect the USB device. - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd) -{ - __HAL_LOCK(hpcd); - (void)USB_DevDisconnect(hpcd->Instance); - __HAL_UNLOCK(hpcd); - return HAL_OK; -} - -/** - * @brief Set the USB Device address. - * @param hpcd PCD handle - * @param address new device address - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address) -{ - __HAL_LOCK(hpcd); - hpcd->USB_Address = address; - (void)USB_SetDevAddress(hpcd->Instance, address); - __HAL_UNLOCK(hpcd); - return HAL_OK; -} -/** - * @brief Open and configure an endpoint. - * @param hpcd PCD handle - * @param ep_addr endpoint address - * @param ep_mps endpoint max packet size - * @param ep_type endpoint type - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type) -{ - HAL_StatusTypeDef ret = HAL_OK; - PCD_EPTypeDef *ep; - - if ((ep_addr & 0x80U) == 0x80U) - { - ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; - ep->is_in = 1U; - } - else - { - ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; - ep->is_in = 0U; - } - - ep->num = ep_addr & EP_ADDR_MSK; - ep->maxpacket = ep_mps; - ep->type = ep_type; - - if (ep->is_in != 0U) - { - /* Assign a Tx FIFO */ - ep->tx_fifo_num = ep->num; - } - /* Set initial data PID. */ - if (ep_type == EP_TYPE_BULK) - { - ep->data_pid_start = 0U; - } - - __HAL_LOCK(hpcd); - (void)USB_ActivateEndpoint(hpcd->Instance, ep); - __HAL_UNLOCK(hpcd); - - return ret; -} - -/** - * @brief Deactivate an endpoint. - * @param hpcd PCD handle - * @param ep_addr endpoint address - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) -{ - PCD_EPTypeDef *ep; - - if ((ep_addr & 0x80U) == 0x80U) - { - ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; - ep->is_in = 1U; - } - else - { - ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; - ep->is_in = 0U; - } - ep->num = ep_addr & EP_ADDR_MSK; - - __HAL_LOCK(hpcd); - (void)USB_DeactivateEndpoint(hpcd->Instance, ep); - __HAL_UNLOCK(hpcd); - return HAL_OK; -} - - -/** - * @brief Receive an amount of data. - * @param hpcd PCD handle - * @param ep_addr endpoint address - * @param pBuf pointer to the reception buffer - * @param len amount of data to be received - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len) -{ - PCD_EPTypeDef *ep; - - ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; - - /*setup and start the Xfer */ - ep->xfer_buff = pBuf; - ep->xfer_len = len; - ep->xfer_count = 0U; - ep->is_in = 0U; - ep->num = ep_addr & EP_ADDR_MSK; - - if ((ep_addr & EP_ADDR_MSK) == 0U) - { - (void)USB_EP0StartXfer(hpcd->Instance, ep); - } - else - { - (void)USB_EPStartXfer(hpcd->Instance, ep); - } - - return HAL_OK; -} - -/** - * @brief Get Received Data Size - * @param hpcd PCD handle - * @param ep_addr endpoint address - * @retval Data Size - */ -uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) -{ - return hpcd->OUT_ep[ep_addr & EP_ADDR_MSK].xfer_count; -} -/** - * @brief Send an amount of data - * @param hpcd PCD handle - * @param ep_addr endpoint address - * @param pBuf pointer to the transmission buffer - * @param len amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len) -{ - PCD_EPTypeDef *ep; - - ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; - - /*setup and start the Xfer */ - ep->xfer_buff = pBuf; - ep->xfer_len = len; - ep->xfer_count = 0U; - ep->is_in = 1U; - ep->num = ep_addr & EP_ADDR_MSK; - - if ((ep_addr & EP_ADDR_MSK) == 0U) - { - (void)USB_EP0StartXfer(hpcd->Instance, ep); - } - else - { - (void)USB_EPStartXfer(hpcd->Instance, ep); - } - - return HAL_OK; -} - -/** - * @brief Set a STALL condition over an endpoint - * @param hpcd PCD handle - * @param ep_addr endpoint address - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) -{ - PCD_EPTypeDef *ep; - - if (((uint32_t)ep_addr & EP_ADDR_MSK) > hpcd->Init.dev_endpoints) - { - return HAL_ERROR; - } - - if ((0x80U & ep_addr) == 0x80U) - { - ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; - ep->is_in = 1U; - } - else - { - ep = &hpcd->OUT_ep[ep_addr]; - ep->is_in = 0U; - } - - ep->is_stall = 1U; - ep->num = ep_addr & EP_ADDR_MSK; - - __HAL_LOCK(hpcd); - - (void)USB_EPSetStall(hpcd->Instance, ep); - if ((ep_addr & EP_ADDR_MSK) == 0U) - { - (void)USB_EP0_OutStart(hpcd->Instance, (uint8_t *)hpcd->Setup); - } - __HAL_UNLOCK(hpcd); - - return HAL_OK; -} - -/** - * @brief Clear a STALL condition over in an endpoint - * @param hpcd PCD handle - * @param ep_addr endpoint address - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) -{ - PCD_EPTypeDef *ep; - - if (((uint32_t)ep_addr & 0x0FU) > hpcd->Init.dev_endpoints) - { - return HAL_ERROR; - } - - if ((0x80U & ep_addr) == 0x80U) - { - ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; - ep->is_in = 1U; - } - else - { - ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; - ep->is_in = 0U; - } - - ep->is_stall = 0U; - ep->num = ep_addr & EP_ADDR_MSK; - - __HAL_LOCK(hpcd); - (void)USB_EPClearStall(hpcd->Instance, ep); - __HAL_UNLOCK(hpcd); - - return HAL_OK; -} - -/** - * @brief Flush an endpoint - * @param hpcd PCD handle - * @param ep_addr endpoint address - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - UNUSED(ep_addr); - - return HAL_OK; -} - -/** - * @brief Activate remote wakeup signalling - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd) -{ - return (USB_ActivateRemoteWakeup(hpcd->Instance)); -} - -/** - * @brief De-activate remote wakeup signalling. - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd) -{ - return (USB_DeActivateRemoteWakeup(hpcd->Instance)); -} - -/** - * @} - */ - -/** @defgroup PCD_Exported_Functions_Group4 Peripheral State functions - * @brief Peripheral State functions - * -@verbatim - =============================================================================== - ##### Peripheral State functions ##### - =============================================================================== - [..] - This subsection permits to get in run-time the status of the peripheral - and the data flow. - -@endverbatim - * @{ - */ - -/** - * @brief Return the PCD handle state. - * @param hpcd PCD handle - * @retval HAL state - */ -PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd) -{ - return hpcd->State; -} - -/** - * @} - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @addtogroup PCD_Private_Functions - * @{ - */ - - -/** - * @brief This function handles PCD Endpoint interrupt request. - * @param hpcd PCD handle - * @retval HAL status - */ -static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd) -{ - PCD_EPTypeDef *ep; - uint16_t count; - uint16_t wIstr; - uint16_t wEPVal; - uint8_t epindex; - - /* stay in loop while pending interrupts */ - while ((hpcd->Instance->ISTR & USB_ISTR_CTR) != 0U) - { - wIstr = hpcd->Instance->ISTR; - /* extract highest priority endpoint number */ - epindex = (uint8_t)(wIstr & USB_ISTR_EP_ID); - - if (epindex == 0U) - { - /* Decode and service control endpoint interrupt */ - - /* DIR bit = origin of the interrupt */ - if ((wIstr & USB_ISTR_DIR) == 0U) - { - /* DIR = 0 */ - - /* DIR = 0 => IN int */ - /* DIR = 0 implies that (EP_CTR_TX = 1) always */ - PCD_CLEAR_TX_EP_CTR(hpcd->Instance, PCD_ENDP0); - ep = &hpcd->IN_ep[0]; - - ep->xfer_count = PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num); - ep->xfer_buff += ep->xfer_count; - - /* TX COMPLETE */ -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->DataInStageCallback(hpcd, 0U); -#else - HAL_PCD_DataInStageCallback(hpcd, 0U); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - - if ((hpcd->USB_Address > 0U) && (ep->xfer_len == 0U)) - { - hpcd->Instance->DADDR = ((uint16_t)hpcd->USB_Address | USB_DADDR_EF); - hpcd->USB_Address = 0U; - } - } - else - { - /* DIR = 1 */ - - /* DIR = 1 & CTR_RX => SETUP or OUT int */ - /* DIR = 1 & (CTR_TX | CTR_RX) => 2 int pending */ - ep = &hpcd->OUT_ep[0]; - wEPVal = PCD_GET_ENDPOINT(hpcd->Instance, PCD_ENDP0); - - if ((wEPVal & USB_EP_SETUP) != 0U) - { - /* Get SETUP Packet*/ - ep->xfer_count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); - - USB_ReadPMA(hpcd->Instance, (uint8_t *)hpcd->Setup, - ep->pmaadress, (uint16_t)ep->xfer_count); - - /* SETUP bit kept frozen while CTR_RX = 1*/ - PCD_CLEAR_RX_EP_CTR(hpcd->Instance, PCD_ENDP0); - - /* Process SETUP Packet*/ -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->SetupStageCallback(hpcd); -#else - HAL_PCD_SetupStageCallback(hpcd); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - - else if ((wEPVal & USB_EP_CTR_RX) != 0U) - { - PCD_CLEAR_RX_EP_CTR(hpcd->Instance, PCD_ENDP0); - - /* Get Control Data OUT Packet*/ - ep->xfer_count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); - - if ((ep->xfer_count != 0U) && (ep->xfer_buff != 0U)) - { - USB_ReadPMA(hpcd->Instance, ep->xfer_buff, - ep->pmaadress, (uint16_t)ep->xfer_count); - - ep->xfer_buff += ep->xfer_count; - - /* Process Control Data OUT Packet*/ -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->DataOutStageCallback(hpcd, 0U); -#else - HAL_PCD_DataOutStageCallback(hpcd, 0U); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - - PCD_SET_EP_RX_CNT(hpcd->Instance, PCD_ENDP0, ep->maxpacket); - PCD_SET_EP_RX_STATUS(hpcd->Instance, PCD_ENDP0, USB_EP_RX_VALID); - } - } - } - else - { - /* Decode and service non control endpoints interrupt */ - - /* process related endpoint register */ - wEPVal = PCD_GET_ENDPOINT(hpcd->Instance, epindex); - if ((wEPVal & USB_EP_CTR_RX) != 0U) - { - /* clear int flag */ - PCD_CLEAR_RX_EP_CTR(hpcd->Instance, epindex); - ep = &hpcd->OUT_ep[epindex]; - - /* OUT double Buffering*/ - if (ep->doublebuffer == 0U) - { - count = (uint16_t)PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); - if (count != 0U) - { - USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaadress, count); - } - } - else - { - if ((PCD_GET_ENDPOINT(hpcd->Instance, ep->num) & USB_EP_DTOG_RX) != 0U) - { - /*read from endpoint BUF0Addr buffer*/ - count = (uint16_t)PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num); - if (count != 0U) - { - USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, count); - } - } - else - { - /*read from endpoint BUF1Addr buffer*/ - count = (uint16_t)PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num); - if (count != 0U) - { - USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, count); - } - } - /* free EP OUT Buffer */ - PCD_FreeUserBuffer(hpcd->Instance, ep->num, 0U); - } - /*multi-packet on the NON control OUT endpoint*/ - ep->xfer_count += count; - ep->xfer_buff += count; - - if ((ep->xfer_len == 0U) || (count < ep->maxpacket)) - { - /* RX COMPLETE */ -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->DataOutStageCallback(hpcd, ep->num); -#else - HAL_PCD_DataOutStageCallback(hpcd, ep->num); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - else - { - (void)HAL_PCD_EP_Receive(hpcd, ep->num, ep->xfer_buff, ep->xfer_len); - } - - } /* if((wEPVal & EP_CTR_RX) */ - - if ((wEPVal & USB_EP_CTR_TX) != 0U) - { - ep = &hpcd->IN_ep[epindex]; - - /* clear int flag */ - PCD_CLEAR_TX_EP_CTR(hpcd->Instance, epindex); - - /*multi-packet on the NON control IN endpoint*/ - ep->xfer_count = PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num); - ep->xfer_buff += ep->xfer_count; - - /* Zero Length Packet? */ - if (ep->xfer_len == 0U) - { - /* TX COMPLETE */ -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->DataInStageCallback(hpcd, ep->num); -#else - HAL_PCD_DataInStageCallback(hpcd, ep->num); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - else - { - (void)HAL_PCD_EP_Transmit(hpcd, ep->num, ep->xfer_buff, ep->xfer_len); - } - } - } - } - return HAL_OK; -} - - -/** - * @} - */ -#endif /* defined (USB) */ -#endif /* HAL_PCD_MODULE_ENABLED */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit