From 6ab94e0b318884bbcb95e2ea3835f951502e1d99 Mon Sep 17 00:00:00 2001 From: jaseg Date: Wed, 14 Oct 2020 12:47:28 +0200 Subject: Move firmware into subdirectory --- .../STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h | 1686 ++++++++++++++++++++ 1 file changed, 1686 insertions(+) create mode 100644 fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h (limited to 'fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h') diff --git a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h b/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h new file mode 100644 index 0000000..4239c51 --- /dev/null +++ b/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h @@ -0,0 +1,1686 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_rcc.h + * @author MCD Application Team + * @brief Header file of RCC HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_RCC_H +#define __STM32F0xx_HAL_RCC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup RCC + * @{ + */ + +/** @addtogroup RCC_Private_Constants + * @{ + */ + +/** @defgroup RCC_Timeout RCC Timeout + * @{ + */ + +/* Disable Backup domain write protection state change timeout */ +#define RCC_DBP_TIMEOUT_VALUE (100U) /* 100 ms */ +/* LSE state change timeout */ +#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT +#define CLOCKSWITCH_TIMEOUT_VALUE (5000U) /* 5 s */ +#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT +#define HSI_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1U) */ +#define LSI_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1U) */ +#define PLL_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1U) */ +#define HSI14_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1U) */ +#if defined(RCC_HSI48_SUPPORT) +#define HSI48_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1U) */ +#endif /* RCC_HSI48_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_Register_Offset Register offsets + * @{ + */ +#define RCC_OFFSET (RCC_BASE - PERIPH_BASE) +#define RCC_CR_OFFSET 0x00 +#define RCC_CFGR_OFFSET 0x04 +#define RCC_CIR_OFFSET 0x08 +#define RCC_BDCR_OFFSET 0x20 +#define RCC_CSR_OFFSET 0x24 + +/** + * @} + */ + + +/* CR register byte 2 (Bits[23:16]) base address */ +#define RCC_CR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + RCC_CR_OFFSET + 0x02U)) + +/* CIR register byte 1 (Bits[15:8]) base address */ +#define RCC_CIR_BYTE1_ADDRESS ((uint32_t)(RCC_BASE + RCC_CIR_OFFSET + 0x01U)) + +/* CIR register byte 2 (Bits[23:16]) base address */ +#define RCC_CIR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + RCC_CIR_OFFSET + 0x02U)) + +/* Defines used for Flags */ +#define CR_REG_INDEX ((uint8_t)1U) +#define CR2_REG_INDEX ((uint8_t)2U) +#define BDCR_REG_INDEX ((uint8_t)3U) +#define CSR_REG_INDEX ((uint8_t)4U) + +/* Bits position in in the CFGR register */ +#define RCC_CFGR_PLLMUL_BITNUMBER 18U +#define RCC_CFGR_HPRE_BITNUMBER 4U +#define RCC_CFGR_PPRE_BITNUMBER 8U +/* Flags in the CFGR2 register */ +#define RCC_CFGR2_PREDIV_BITNUMBER 0 +/* Flags in the CR register */ +#define RCC_CR_HSIRDY_BitNumber 1 +#define RCC_CR_HSERDY_BitNumber 17 +#define RCC_CR_PLLRDY_BitNumber 25 +/* Flags in the CR2 register */ +#define RCC_CR2_HSI14RDY_BitNumber 1 +#define RCC_CR2_HSI48RDY_BitNumber 16 +/* Flags in the BDCR register */ +#define RCC_BDCR_LSERDY_BitNumber 1 +/* Flags in the CSR register */ +#define RCC_CSR_LSIRDY_BitNumber 1 +#define RCC_CSR_V18PWRRSTF_BitNumber 23 +#define RCC_CSR_RMVF_BitNumber 24 +#define RCC_CSR_OBLRSTF_BitNumber 25 +#define RCC_CSR_PINRSTF_BitNumber 26 +#define RCC_CSR_PORRSTF_BitNumber 27 +#define RCC_CSR_SFTRSTF_BitNumber 28 +#define RCC_CSR_IWDGRSTF_BitNumber 29 +#define RCC_CSR_WWDGRSTF_BitNumber 30 +#define RCC_CSR_LPWRRSTF_BitNumber 31 +/* Flags in the HSITRIM register */ +#define RCC_CR_HSITRIM_BitNumber 3 +#define RCC_HSI14TRIM_BIT_NUMBER 3 +#define RCC_FLAG_MASK ((uint8_t)0x1FU) + +/** + * @} + */ + +/** @addtogroup RCC_Private_Macros + * @{ + */ +#define IS_RCC_HSE(__HSE__) (((__HSE__) == RCC_HSE_OFF) || ((__HSE__) == RCC_HSE_ON) || \ + ((__HSE__) == RCC_HSE_BYPASS)) +#define IS_RCC_LSE(__LSE__) (((__LSE__) == RCC_LSE_OFF) || ((__LSE__) == RCC_LSE_ON) || \ + ((__LSE__) == RCC_LSE_BYPASS)) +#define IS_RCC_HSI(__HSI__) (((__HSI__) == RCC_HSI_OFF) || ((__HSI__) == RCC_HSI_ON)) +#define IS_RCC_HSI14(__HSI14__) (((__HSI14__) == RCC_HSI14_OFF) || ((__HSI14__) == RCC_HSI14_ON) || ((__HSI14__) == RCC_HSI14_ADC_CONTROL)) +#define IS_RCC_CALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= 0x1FU) +#define IS_RCC_LSI(__LSI__) (((__LSI__) == RCC_LSI_OFF) || ((__LSI__) == RCC_LSI_ON)) +#define IS_RCC_PLL(__PLL__) (((__PLL__) == RCC_PLL_NONE) || ((__PLL__) == RCC_PLL_OFF) || \ + ((__PLL__) == RCC_PLL_ON)) +#define IS_RCC_PREDIV(__PREDIV__) (((__PREDIV__) == RCC_PREDIV_DIV1) || ((__PREDIV__) == RCC_PREDIV_DIV2) || \ + ((__PREDIV__) == RCC_PREDIV_DIV3) || ((__PREDIV__) == RCC_PREDIV_DIV4) || \ + ((__PREDIV__) == RCC_PREDIV_DIV5) || ((__PREDIV__) == RCC_PREDIV_DIV6) || \ + ((__PREDIV__) == RCC_PREDIV_DIV7) || ((__PREDIV__) == RCC_PREDIV_DIV8) || \ + ((__PREDIV__) == RCC_PREDIV_DIV9) || ((__PREDIV__) == RCC_PREDIV_DIV10) || \ + ((__PREDIV__) == RCC_PREDIV_DIV11) || ((__PREDIV__) == RCC_PREDIV_DIV12) || \ + ((__PREDIV__) == RCC_PREDIV_DIV13) || ((__PREDIV__) == RCC_PREDIV_DIV14) || \ + ((__PREDIV__) == RCC_PREDIV_DIV15) || ((__PREDIV__) == RCC_PREDIV_DIV16)) + +#define IS_RCC_PLL_MUL(__MUL__) (((__MUL__) == RCC_PLL_MUL2) || ((__MUL__) == RCC_PLL_MUL3) || \ + ((__MUL__) == RCC_PLL_MUL4) || ((__MUL__) == RCC_PLL_MUL5) || \ + ((__MUL__) == RCC_PLL_MUL6) || ((__MUL__) == RCC_PLL_MUL7) || \ + ((__MUL__) == RCC_PLL_MUL8) || ((__MUL__) == RCC_PLL_MUL9) || \ + ((__MUL__) == RCC_PLL_MUL10) || ((__MUL__) == RCC_PLL_MUL11) || \ + ((__MUL__) == RCC_PLL_MUL12) || ((__MUL__) == RCC_PLL_MUL13) || \ + ((__MUL__) == RCC_PLL_MUL14) || ((__MUL__) == RCC_PLL_MUL15) || \ + ((__MUL__) == RCC_PLL_MUL16)) +#define IS_RCC_CLOCKTYPE(__CLK__) ((((__CLK__) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) || \ + (((__CLK__) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) || \ + (((__CLK__) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1)) +#define IS_RCC_HCLK(__HCLK__) (((__HCLK__) == RCC_SYSCLK_DIV1) || ((__HCLK__) == RCC_SYSCLK_DIV2) || \ + ((__HCLK__) == RCC_SYSCLK_DIV4) || ((__HCLK__) == RCC_SYSCLK_DIV8) || \ + ((__HCLK__) == RCC_SYSCLK_DIV16) || ((__HCLK__) == RCC_SYSCLK_DIV64) || \ + ((__HCLK__) == RCC_SYSCLK_DIV128) || ((__HCLK__) == RCC_SYSCLK_DIV256) || \ + ((__HCLK__) == RCC_SYSCLK_DIV512)) +#define IS_RCC_PCLK(__PCLK__) (((__PCLK__) == RCC_HCLK_DIV1) || ((__PCLK__) == RCC_HCLK_DIV2) || \ + ((__PCLK__) == RCC_HCLK_DIV4) || ((__PCLK__) == RCC_HCLK_DIV8) || \ + ((__PCLK__) == RCC_HCLK_DIV16)) +#define IS_RCC_MCO(__MCO__) ((__MCO__) == RCC_MCO) +#define IS_RCC_RTCCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_RTCCLKSOURCE_NO_CLK) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_LSI) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV32)) +#define IS_RCC_USART1CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_USART1CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_USART1CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_USART1CLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_USART1CLKSOURCE_HSI)) +#define IS_RCC_I2C1CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_I2C1CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_I2C1CLKSOURCE_SYSCLK)) + +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Types RCC Exported Types + * @{ + */ + +/** + * @brief RCC PLL configuration structure definition + */ +typedef struct +{ + uint32_t PLLState; /*!< PLLState: The new state of the PLL. + This parameter can be a value of @ref RCC_PLL_Config */ + + uint32_t PLLSource; /*!< PLLSource: PLL entry clock source. + This parameter must be a value of @ref RCC_PLL_Clock_Source */ + + uint32_t PLLMUL; /*!< PLLMUL: Multiplication factor for PLL VCO input clock + This parameter must be a value of @ref RCC_PLL_Multiplication_Factor*/ + + uint32_t PREDIV; /*!< PREDIV: Predivision factor for PLL VCO input clock + This parameter must be a value of @ref RCC_PLL_Prediv_Factor */ + +} RCC_PLLInitTypeDef; + +/** + * @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition + */ +typedef struct +{ + uint32_t OscillatorType; /*!< The oscillators to be configured. + This parameter can be a value of @ref RCC_Oscillator_Type */ + + uint32_t HSEState; /*!< The new state of the HSE. + This parameter can be a value of @ref RCC_HSE_Config */ + + uint32_t LSEState; /*!< The new state of the LSE. + This parameter can be a value of @ref RCC_LSE_Config */ + + uint32_t HSIState; /*!< The new state of the HSI. + This parameter can be a value of @ref RCC_HSI_Config */ + + uint32_t HSICalibrationValue; /*!< The HSI calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT). + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1FU */ + + uint32_t HSI14State; /*!< The new state of the HSI14. + This parameter can be a value of @ref RCC_HSI14_Config */ + + uint32_t HSI14CalibrationValue; /*!< The HSI14 calibration trimming value (default is RCC_HSI14CALIBRATION_DEFAULT). + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1FU */ + + uint32_t LSIState; /*!< The new state of the LSI. + This parameter can be a value of @ref RCC_LSI_Config */ + +#if defined(RCC_HSI48_SUPPORT) + uint32_t HSI48State; /*!< The new state of the HSI48. + This parameter can be a value of @ref RCC_HSI48_Config */ + +#endif /* RCC_HSI48_SUPPORT */ + RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */ + +} RCC_OscInitTypeDef; + +/** + * @brief RCC System, AHB and APB busses clock configuration structure definition + */ +typedef struct +{ + uint32_t ClockType; /*!< The clock to be configured. + This parameter can be a value of @ref RCC_System_Clock_Type */ + + uint32_t SYSCLKSource; /*!< The clock source (SYSCLKS) used as system clock. + This parameter can be a value of @ref RCC_System_Clock_Source */ + + uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK). + This parameter can be a value of @ref RCC_AHB_Clock_Source */ + + uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_APB1_Clock_Source */ + +} RCC_ClkInitTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCC_Exported_Constants RCC Exported Constants + * @{ + */ + +/** @defgroup RCC_PLL_Clock_Source PLL Clock Source + * @{ + */ + +#define RCC_PLLSOURCE_HSE RCC_CFGR_PLLSRC_HSE_PREDIV /*!< HSE clock selected as PLL entry clock source */ + +/** + * @} + */ + +/** @defgroup RCC_Oscillator_Type Oscillator Type + * @{ + */ +#define RCC_OSCILLATORTYPE_NONE (0x00000000U) +#define RCC_OSCILLATORTYPE_HSE (0x00000001U) +#define RCC_OSCILLATORTYPE_HSI (0x00000002U) +#define RCC_OSCILLATORTYPE_LSE (0x00000004U) +#define RCC_OSCILLATORTYPE_LSI (0x00000008U) +#define RCC_OSCILLATORTYPE_HSI14 (0x00000010U) +#if defined(RCC_HSI48_SUPPORT) +#define RCC_OSCILLATORTYPE_HSI48 (0x00000020U) +#endif /* RCC_HSI48_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_HSE_Config HSE Config + * @{ + */ +#define RCC_HSE_OFF (0x00000000U) /*!< HSE clock deactivation */ +#define RCC_HSE_ON (0x00000001U) /*!< HSE clock activation */ +#define RCC_HSE_BYPASS (0x00000005U) /*!< External clock source for HSE clock */ +/** + * @} + */ + +/** @defgroup RCC_LSE_Config LSE Config + * @{ + */ +#define RCC_LSE_OFF (0x00000000U) /*!< LSE clock deactivation */ +#define RCC_LSE_ON (0x00000001U) /*!< LSE clock activation */ +#define RCC_LSE_BYPASS (0x00000005U) /*!< External clock source for LSE clock */ + +/** + * @} + */ + +/** @defgroup RCC_HSI_Config HSI Config + * @{ + */ +#define RCC_HSI_OFF (0x00000000U) /*!< HSI clock deactivation */ +#define RCC_HSI_ON RCC_CR_HSION /*!< HSI clock activation */ + +#define RCC_HSICALIBRATION_DEFAULT (0x10U) /* Default HSI calibration trimming value */ + +/** + * @} + */ + +/** @defgroup RCC_HSI14_Config RCC HSI14 Config + * @{ + */ +#define RCC_HSI14_OFF (0x00000000U) +#define RCC_HSI14_ON RCC_CR2_HSI14ON +#define RCC_HSI14_ADC_CONTROL (~RCC_CR2_HSI14DIS) + +#define RCC_HSI14CALIBRATION_DEFAULT (0x10U) /* Default HSI14 calibration trimming value */ +/** + * @} + */ + +/** @defgroup RCC_LSI_Config LSI Config + * @{ + */ +#define RCC_LSI_OFF (0x00000000U) /*!< LSI clock deactivation */ +#define RCC_LSI_ON RCC_CSR_LSION /*!< LSI clock activation */ + +/** + * @} + */ + +#if defined(RCC_HSI48_SUPPORT) +/** @defgroup RCC_HSI48_Config HSI48 Config + * @{ + */ +#define RCC_HSI48_OFF ((uint8_t)0x00U) +#define RCC_HSI48_ON ((uint8_t)0x01U) + +/** + * @} + */ +#endif /* RCC_HSI48_SUPPORT */ + +/** @defgroup RCC_PLL_Config PLL Config + * @{ + */ +#define RCC_PLL_NONE (0x00000000U) /*!< PLL is not configured */ +#define RCC_PLL_OFF (0x00000001U) /*!< PLL deactivation */ +#define RCC_PLL_ON (0x00000002U) /*!< PLL activation */ + +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Type System Clock Type + * @{ + */ +#define RCC_CLOCKTYPE_SYSCLK (0x00000001U) /*!< SYSCLK to configure */ +#define RCC_CLOCKTYPE_HCLK (0x00000002U) /*!< HCLK to configure */ +#define RCC_CLOCKTYPE_PCLK1 (0x00000004U) /*!< PCLK1 to configure */ + +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Source System Clock Source + * @{ + */ +#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI /*!< HSI selected as system clock */ +#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE /*!< HSE selected as system clock */ +#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL /*!< PLL selected as system clock */ + +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status + * @{ + */ +#define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_PLL /*!< PLL used as system clock */ + +/** + * @} + */ + +/** @defgroup RCC_AHB_Clock_Source AHB Clock Source + * @{ + */ +#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1 /*!< SYSCLK not divided */ +#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2 /*!< SYSCLK divided by 2 */ +#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4 /*!< SYSCLK divided by 4 */ +#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8 /*!< SYSCLK divided by 8 */ +#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16 /*!< SYSCLK divided by 16 */ +#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64 /*!< SYSCLK divided by 64 */ +#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128 /*!< SYSCLK divided by 128 */ +#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256 /*!< SYSCLK divided by 256 */ +#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512 /*!< SYSCLK divided by 512 */ + +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Source RCC APB1 Clock Source + * @{ + */ +#define RCC_HCLK_DIV1 RCC_CFGR_PPRE_DIV1 /*!< HCLK not divided */ +#define RCC_HCLK_DIV2 RCC_CFGR_PPRE_DIV2 /*!< HCLK divided by 2 */ +#define RCC_HCLK_DIV4 RCC_CFGR_PPRE_DIV4 /*!< HCLK divided by 4 */ +#define RCC_HCLK_DIV8 RCC_CFGR_PPRE_DIV8 /*!< HCLK divided by 8 */ +#define RCC_HCLK_DIV16 RCC_CFGR_PPRE_DIV16 /*!< HCLK divided by 16 */ + +/** + * @} + */ + +/** @defgroup RCC_RTC_Clock_Source RTC Clock Source + * @{ + */ +#define RCC_RTCCLKSOURCE_NO_CLK (0x00000000U) /*!< No clock */ +#define RCC_RTCCLKSOURCE_LSE RCC_BDCR_RTCSEL_LSE /*!< LSE oscillator clock used as RTC clock */ +#define RCC_RTCCLKSOURCE_LSI RCC_BDCR_RTCSEL_LSI /*!< LSI oscillator clock used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV32 RCC_BDCR_RTCSEL_HSE /*!< HSE oscillator clock divided by 32 used as RTC clock */ +/** + * @} + */ + +/** @defgroup RCC_PLL_Multiplication_Factor RCC PLL Multiplication Factor + * @{ + */ +#define RCC_PLL_MUL2 RCC_CFGR_PLLMUL2 +#define RCC_PLL_MUL3 RCC_CFGR_PLLMUL3 +#define RCC_PLL_MUL4 RCC_CFGR_PLLMUL4 +#define RCC_PLL_MUL5 RCC_CFGR_PLLMUL5 +#define RCC_PLL_MUL6 RCC_CFGR_PLLMUL6 +#define RCC_PLL_MUL7 RCC_CFGR_PLLMUL7 +#define RCC_PLL_MUL8 RCC_CFGR_PLLMUL8 +#define RCC_PLL_MUL9 RCC_CFGR_PLLMUL9 +#define RCC_PLL_MUL10 RCC_CFGR_PLLMUL10 +#define RCC_PLL_MUL11 RCC_CFGR_PLLMUL11 +#define RCC_PLL_MUL12 RCC_CFGR_PLLMUL12 +#define RCC_PLL_MUL13 RCC_CFGR_PLLMUL13 +#define RCC_PLL_MUL14 RCC_CFGR_PLLMUL14 +#define RCC_PLL_MUL15 RCC_CFGR_PLLMUL15 +#define RCC_PLL_MUL16 RCC_CFGR_PLLMUL16 + +/** + * @} + */ + +/** @defgroup RCC_PLL_Prediv_Factor RCC PLL Prediv Factor + * @{ + */ + +#define RCC_PREDIV_DIV1 RCC_CFGR2_PREDIV_DIV1 +#define RCC_PREDIV_DIV2 RCC_CFGR2_PREDIV_DIV2 +#define RCC_PREDIV_DIV3 RCC_CFGR2_PREDIV_DIV3 +#define RCC_PREDIV_DIV4 RCC_CFGR2_PREDIV_DIV4 +#define RCC_PREDIV_DIV5 RCC_CFGR2_PREDIV_DIV5 +#define RCC_PREDIV_DIV6 RCC_CFGR2_PREDIV_DIV6 +#define RCC_PREDIV_DIV7 RCC_CFGR2_PREDIV_DIV7 +#define RCC_PREDIV_DIV8 RCC_CFGR2_PREDIV_DIV8 +#define RCC_PREDIV_DIV9 RCC_CFGR2_PREDIV_DIV9 +#define RCC_PREDIV_DIV10 RCC_CFGR2_PREDIV_DIV10 +#define RCC_PREDIV_DIV11 RCC_CFGR2_PREDIV_DIV11 +#define RCC_PREDIV_DIV12 RCC_CFGR2_PREDIV_DIV12 +#define RCC_PREDIV_DIV13 RCC_CFGR2_PREDIV_DIV13 +#define RCC_PREDIV_DIV14 RCC_CFGR2_PREDIV_DIV14 +#define RCC_PREDIV_DIV15 RCC_CFGR2_PREDIV_DIV15 +#define RCC_PREDIV_DIV16 RCC_CFGR2_PREDIV_DIV16 + +/** + * @} + */ + + +/** @defgroup RCC_USART1_Clock_Source RCC USART1 Clock Source + * @{ + */ +#define RCC_USART1CLKSOURCE_PCLK1 RCC_CFGR3_USART1SW_PCLK +#define RCC_USART1CLKSOURCE_SYSCLK RCC_CFGR3_USART1SW_SYSCLK +#define RCC_USART1CLKSOURCE_LSE RCC_CFGR3_USART1SW_LSE +#define RCC_USART1CLKSOURCE_HSI RCC_CFGR3_USART1SW_HSI + +/** + * @} + */ + +/** @defgroup RCC_I2C1_Clock_Source RCC I2C1 Clock Source + * @{ + */ +#define RCC_I2C1CLKSOURCE_HSI RCC_CFGR3_I2C1SW_HSI +#define RCC_I2C1CLKSOURCE_SYSCLK RCC_CFGR3_I2C1SW_SYSCLK + +/** + * @} + */ +/** @defgroup RCC_MCO_Index MCO Index + * @{ + */ +#define RCC_MCO1 (0x00000000U) +#define RCC_MCO RCC_MCO1 /*!< MCO1 to be compliant with other families with 2 MCOs*/ + +/** + * @} + */ + +/** @defgroup RCC_MCO_Clock_Source RCC MCO Clock Source + * @{ + */ +#define RCC_MCO1SOURCE_NOCLOCK RCC_CFGR_MCO_NOCLOCK +#define RCC_MCO1SOURCE_LSI RCC_CFGR_MCO_LSI +#define RCC_MCO1SOURCE_LSE RCC_CFGR_MCO_LSE +#define RCC_MCO1SOURCE_SYSCLK RCC_CFGR_MCO_SYSCLK +#define RCC_MCO1SOURCE_HSI RCC_CFGR_MCO_HSI +#define RCC_MCO1SOURCE_HSE RCC_CFGR_MCO_HSE +#define RCC_MCO1SOURCE_PLLCLK_DIV2 RCC_CFGR_MCO_PLL +#define RCC_MCO1SOURCE_HSI14 RCC_CFGR_MCO_HSI14 + +/** + * @} + */ + +/** @defgroup RCC_Interrupt Interrupts + * @{ + */ +#define RCC_IT_LSIRDY ((uint8_t)RCC_CIR_LSIRDYF) /*!< LSI Ready Interrupt flag */ +#define RCC_IT_LSERDY ((uint8_t)RCC_CIR_LSERDYF) /*!< LSE Ready Interrupt flag */ +#define RCC_IT_HSIRDY ((uint8_t)RCC_CIR_HSIRDYF) /*!< HSI Ready Interrupt flag */ +#define RCC_IT_HSERDY ((uint8_t)RCC_CIR_HSERDYF) /*!< HSE Ready Interrupt flag */ +#define RCC_IT_PLLRDY ((uint8_t)RCC_CIR_PLLRDYF) /*!< PLL Ready Interrupt flag */ +#define RCC_IT_HSI14RDY ((uint8_t)RCC_CIR_HSI14RDYF) /*!< HSI14 Ready Interrupt flag */ +#if defined(RCC_CIR_HSI48RDYF) +#define RCC_IT_HSI48RDY ((uint8_t)RCC_CIR_HSI48RDYF) /*!< HSI48 Ready Interrupt flag */ +#endif +#define RCC_IT_CSS ((uint8_t)RCC_CIR_CSSF) /*!< Clock Security System Interrupt flag */ +/** + * @} + */ + +/** @defgroup RCC_Flag Flags + * Elements values convention: XXXYYYYYb + * - YYYYY : Flag position in the register + * - XXX : Register index + * - 001: CR register + * - 010: CR2 register + * - 011: BDCR register + * - 0100: CSR register + * @{ + */ +/* Flags in the CR register */ +#define RCC_FLAG_HSIRDY ((uint8_t)((CR_REG_INDEX << 5U) | RCC_CR_HSIRDY_BitNumber)) +#define RCC_FLAG_HSERDY ((uint8_t)((CR_REG_INDEX << 5U) | RCC_CR_HSERDY_BitNumber)) +#define RCC_FLAG_PLLRDY ((uint8_t)((CR_REG_INDEX << 5U) | RCC_CR_PLLRDY_BitNumber)) +/* Flags in the CR2 register */ +#define RCC_FLAG_HSI14RDY ((uint8_t)((CR2_REG_INDEX << 5U) | RCC_CR2_HSI14RDY_BitNumber)) + +/* Flags in the CSR register */ +#define RCC_FLAG_LSIRDY ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_LSIRDY_BitNumber)) +#if defined(RCC_CSR_V18PWRRSTF) +#define RCC_FLAG_V18PWRRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_V18PWRRSTF_BitNumber)) +#endif +#define RCC_FLAG_OBLRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_OBLRSTF_BitNumber)) +#define RCC_FLAG_PINRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_PINRSTF_BitNumber)) /*!< PIN reset flag */ +#define RCC_FLAG_PORRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_PORRSTF_BitNumber)) /*!< POR/PDR reset flag */ +#define RCC_FLAG_SFTRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_SFTRSTF_BitNumber)) /*!< Software Reset flag */ +#define RCC_FLAG_IWDGRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_IWDGRSTF_BitNumber)) /*!< Independent Watchdog reset flag */ +#define RCC_FLAG_WWDGRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_WWDGRSTF_BitNumber)) /*!< Window watchdog reset flag */ +#define RCC_FLAG_LPWRRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_LPWRRSTF_BitNumber)) /*!< Low-Power reset flag */ + +/* Flags in the BDCR register */ +#define RCC_FLAG_LSERDY ((uint8_t)((BDCR_REG_INDEX << 5U) | RCC_BDCR_LSERDY_BitNumber)) /*!< External Low Speed oscillator Ready */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Macros RCC Exported Macros + * @{ + */ + +/** @defgroup RCC_AHB_Clock_Enable_Disable RCC AHB Clock Enable Disable + * @brief Enable or disable the AHB peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOAEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOAEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOBEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOBEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOCEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOCEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOFEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOFEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_CRC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_DMA1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_SRAM_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_SRAMEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_SRAMEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_FLITF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_FLITFEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FLITFEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOA_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOAEN)) +#define __HAL_RCC_GPIOB_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOBEN)) +#define __HAL_RCC_GPIOC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOCEN)) +#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOFEN)) +#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_CRCEN)) +#define __HAL_RCC_DMA1_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA1EN)) +#define __HAL_RCC_SRAM_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_SRAMEN)) +#define __HAL_RCC_FLITF_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_FLITFEN)) +/** + * @} + */ + +/** @defgroup RCC_AHB_Peripheral_Clock_Enable_Disable_Status AHB Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the AHB peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOAEN)) != RESET) +#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOBEN)) != RESET) +#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOCEN)) != RESET) +#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOFEN)) != RESET) +#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_CRCEN)) != RESET) +#define __HAL_RCC_DMA1_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA1EN)) != RESET) +#define __HAL_RCC_SRAM_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_SRAMEN)) != RESET) +#define __HAL_RCC_FLITF_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_FLITFEN)) != RESET) +#define __HAL_RCC_GPIOA_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOAEN)) == RESET) +#define __HAL_RCC_GPIOB_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOBEN)) == RESET) +#define __HAL_RCC_GPIOC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOCEN)) == RESET) +#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOFEN)) == RESET) +#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_CRCEN)) == RESET) +#define __HAL_RCC_DMA1_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA1EN)) == RESET) +#define __HAL_RCC_SRAM_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_SRAMEN)) == RESET) +#define __HAL_RCC_FLITF_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_FLITFEN)) == RESET) +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Enable_Disable RCC APB1 Clock Enable Disable + * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_WWDG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_I2C1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_PWR_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN)) +#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN)) +#define __HAL_RCC_WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN)) +#define __HAL_RCC_I2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN)) +#define __HAL_RCC_PWR_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN)) +/** + * @} + */ + +/** @defgroup RCC_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the APB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET) +#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET) +#define __HAL_RCC_WWDG_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) != RESET) +#define __HAL_RCC_I2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) != RESET) +#define __HAL_RCC_PWR_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) != RESET) +#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET) +#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET) +#define __HAL_RCC_WWDG_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) == RESET) +#define __HAL_RCC_I2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) == RESET) +#define __HAL_RCC_PWR_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) == RESET) +/** + * @} + */ + + +/** @defgroup RCC_APB2_Clock_Enable_Disable RCC APB2 Clock Enable Disable + * @brief Enable or disable the High Speed APB (APB2) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_SYSCFG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_ADC1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_SPI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM16_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM17_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_USART1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_DBGMCU_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DBGMCUEN);\ + /* Delay after an RCC peripheral clock enabling */\ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DBGMCUEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_SYSCFG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SYSCFGEN)) +#define __HAL_RCC_ADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN)) +#define __HAL_RCC_TIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN)) +#define __HAL_RCC_SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN)) +#define __HAL_RCC_TIM16_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM16EN)) +#define __HAL_RCC_TIM17_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM17EN)) +#define __HAL_RCC_USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN)) +#define __HAL_RCC_DBGMCU_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_DBGMCUEN)) +/** + * @} + */ + +/** @defgroup RCC_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the APB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_SYSCFG_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) != RESET) +#define __HAL_RCC_ADC1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) != RESET) +#define __HAL_RCC_TIM1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) != RESET) +#define __HAL_RCC_SPI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) != RESET) +#define __HAL_RCC_TIM16_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM16EN)) != RESET) +#define __HAL_RCC_TIM17_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM17EN)) != RESET) +#define __HAL_RCC_USART1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) != RESET) +#define __HAL_RCC_DBGMCU_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DBGMCUEN)) != RESET) +#define __HAL_RCC_SYSCFG_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) == RESET) +#define __HAL_RCC_ADC1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) == RESET) +#define __HAL_RCC_TIM1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) == RESET) +#define __HAL_RCC_SPI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) == RESET) +#define __HAL_RCC_TIM16_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM16EN)) == RESET) +#define __HAL_RCC_TIM17_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM17EN)) == RESET) +#define __HAL_RCC_USART1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) == RESET) +#define __HAL_RCC_DBGMCU_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DBGMCUEN)) == RESET) +/** + * @} + */ + +/** @defgroup RCC_AHB_Force_Release_Reset RCC AHB Force Release Reset + * @brief Force or release AHB peripheral reset. + * @{ + */ +#define __HAL_RCC_AHB_FORCE_RESET() (RCC->AHBRSTR = 0xFFFFFFFFU) +#define __HAL_RCC_GPIOA_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOARST)) +#define __HAL_RCC_GPIOB_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOBRST)) +#define __HAL_RCC_GPIOC_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOCRST)) +#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOFRST)) + +#define __HAL_RCC_AHB_RELEASE_RESET() (RCC->AHBRSTR = 0x00000000U) +#define __HAL_RCC_GPIOA_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOARST)) +#define __HAL_RCC_GPIOB_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOBRST)) +#define __HAL_RCC_GPIOC_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOCRST)) +#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOFRST)) +/** + * @} + */ + +/** @defgroup RCC_APB1_Force_Release_Reset RCC APB1 Force Release Reset + * @brief Force or release APB1 peripheral reset. + * @{ + */ +#define __HAL_RCC_APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFFU) +#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST)) +#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST)) +#define __HAL_RCC_WWDG_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST)) +#define __HAL_RCC_I2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST)) +#define __HAL_RCC_PWR_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST)) + +#define __HAL_RCC_APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00000000U) +#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST)) +#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST)) +#define __HAL_RCC_WWDG_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST)) +#define __HAL_RCC_I2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST)) +#define __HAL_RCC_PWR_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST)) +/** + * @} + */ + +/** @defgroup RCC_APB2_Force_Release_Reset RCC APB2 Force Release Reset + * @brief Force or release APB2 peripheral reset. + * @{ + */ +#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFFU) +#define __HAL_RCC_SYSCFG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SYSCFGRST)) +#define __HAL_RCC_ADC1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADC1RST)) +#define __HAL_RCC_TIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST)) +#define __HAL_RCC_SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST)) +#define __HAL_RCC_USART1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST)) +#define __HAL_RCC_TIM16_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM16RST)) +#define __HAL_RCC_TIM17_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM17RST)) +#define __HAL_RCC_DBGMCU_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_DBGMCURST)) + +#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00000000U) +#define __HAL_RCC_SYSCFG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SYSCFGRST)) +#define __HAL_RCC_ADC1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADC1RST)) +#define __HAL_RCC_TIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST)) +#define __HAL_RCC_SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST)) +#define __HAL_RCC_USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST)) +#define __HAL_RCC_TIM16_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM16RST)) +#define __HAL_RCC_TIM17_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM17RST)) +#define __HAL_RCC_DBGMCU_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_DBGMCURST)) +/** + * @} + */ +/** @defgroup RCC_HSI_Configuration HSI Configuration + * @{ + */ + +/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI). + * @note The HSI is stopped by hardware when entering STOP and STANDBY modes. + * @note HSI can not be stopped if it is used as system clock source. In this case, + * you have to select another source of the system clock then stop the HSI. + * @note After enabling the HSI, the application software should wait on HSIRDY + * flag to be set indicating that HSI clock is stable and can be used as + * system clock source. + * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator + * clock cycles. + */ +#define __HAL_RCC_HSI_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSION) +#define __HAL_RCC_HSI_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSION) + +/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value. + * @note The calibration is used to compensate for the variations in voltage + * and temperature that influence the frequency of the internal HSI RC. + * @param _HSICALIBRATIONVALUE_ specifies the calibration trimming value. + * (default is RCC_HSICALIBRATION_DEFAULT). + * This parameter must be a number between 0 and 0x1F. + */ +#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(_HSICALIBRATIONVALUE_) \ + MODIFY_REG(RCC->CR, RCC_CR_HSITRIM, (uint32_t)(_HSICALIBRATIONVALUE_) << RCC_CR_HSITRIM_BitNumber) + +/** + * @} + */ + +/** @defgroup RCC_LSI_Configuration LSI Configuration + * @{ + */ + +/** @brief Macro to enable the Internal Low Speed oscillator (LSI). + * @note After enabling the LSI, the application software should wait on + * LSIRDY flag to be set indicating that LSI clock is stable and can + * be used to clock the IWDG and/or the RTC. + */ +#define __HAL_RCC_LSI_ENABLE() SET_BIT(RCC->CSR, RCC_CSR_LSION) + +/** @brief Macro to disable the Internal Low Speed oscillator (LSI). + * @note LSI can not be disabled if the IWDG is running. + * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator + * clock cycles. + */ +#define __HAL_RCC_LSI_DISABLE() CLEAR_BIT(RCC->CSR, RCC_CSR_LSION) + +/** + * @} + */ + +/** @defgroup RCC_HSE_Configuration HSE Configuration + * @{ + */ + +/** + * @brief Macro to configure the External High Speed oscillator (HSE). + * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not + * supported by this macro. User should request a transition to HSE Off + * first and then HSE On or HSE Bypass. + * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application + * software should wait on HSERDY flag to be set indicating that HSE clock + * is stable and can be used to clock the PLL and/or system clock. + * @note HSE state can not be changed if it is used directly or through the + * PLL as system clock. In this case, you have to select another source + * of the system clock then change the HSE state (ex. disable it). + * @note The HSE is stopped by hardware when entering STOP and STANDBY modes. + * @note This function reset the CSSON bit, so if the clock security system(CSS) + * was previously enabled you have to enable it again after calling this + * function. + * @param __STATE__ specifies the new state of the HSE. + * This parameter can be one of the following values: + * @arg @ref RCC_HSE_OFF turn OFF the HSE oscillator, HSERDY flag goes low after + * 6 HSE oscillator clock cycles. + * @arg @ref RCC_HSE_ON turn ON the HSE oscillator + * @arg @ref RCC_HSE_BYPASS HSE oscillator bypassed with external clock + */ +#define __HAL_RCC_HSE_CONFIG(__STATE__) \ + do{ \ + if ((__STATE__) == RCC_HSE_ON) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else if ((__STATE__) == RCC_HSE_OFF) \ + { \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ + } \ + else if ((__STATE__) == RCC_HSE_BYPASS) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEBYP); \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ + } \ + }while(0U) + +/** + * @brief Macro to configure the External High Speed oscillator (HSE) Predivision factor for PLL. + * @note Predivision factor can not be changed if PLL is used as system clock + * In this case, you have to select another source of the system clock, disable the PLL and + * then change the HSE predivision factor. + * @param __HSE_PREDIV_VALUE__ specifies the division value applied to HSE. + * This parameter must be a number between RCC_HSE_PREDIV_DIV1 and RCC_HSE_PREDIV_DIV16. + */ +#define __HAL_RCC_HSE_PREDIV_CONFIG(__HSE_PREDIV_VALUE__) \ + MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, (uint32_t)(__HSE_PREDIV_VALUE__)) + +/** + * @} + */ + +/** @defgroup RCC_LSE_Configuration LSE Configuration + * @{ + */ + +/** + * @brief Macro to configure the External Low Speed oscillator (LSE). + * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not supported by this macro. + * @note As the LSE is in the Backup domain and write access is denied to + * this domain after reset, you have to enable write access using + * @ref HAL_PWR_EnableBkUpAccess() function before to configure the LSE + * (to be done once after reset). + * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application + * software should wait on LSERDY flag to be set indicating that LSE clock + * is stable and can be used to clock the RTC. + * @param __STATE__ specifies the new state of the LSE. + * This parameter can be one of the following values: + * @arg @ref RCC_LSE_OFF turn OFF the LSE oscillator, LSERDY flag goes low after + * 6 LSE oscillator clock cycles. + * @arg @ref RCC_LSE_ON turn ON the LSE oscillator. + * @arg @ref RCC_LSE_BYPASS LSE oscillator bypassed with external clock. + */ +#define __HAL_RCC_LSE_CONFIG(__STATE__) \ + do{ \ + if ((__STATE__) == RCC_LSE_ON) \ + { \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + } \ + else if ((__STATE__) == RCC_LSE_OFF) \ + { \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + } \ + else if ((__STATE__) == RCC_LSE_BYPASS) \ + { \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + } \ + }while(0U) + +/** + * @} + */ + +/** @defgroup RCC_HSI14_Configuration RCC_HSI14_Configuration + * @{ + */ + +/** @brief Macro to enable the Internal 14Mhz High Speed oscillator (HSI14). + * @note After enabling the HSI14 with @ref __HAL_RCC_HSI14_ENABLE(), the application software + * should wait on HSI14RDY flag to be set indicating that HSI clock is stable and can be + * used as system clock source. This is not necessary if @ref HAL_RCC_OscConfig() is used. + * clock cycles. + */ +#define __HAL_RCC_HSI14_ENABLE() SET_BIT(RCC->CR2, RCC_CR2_HSI14ON) + +/** @brief Macro to disable the Internal 14Mhz High Speed oscillator (HSI14). + * @note The HSI14 is stopped by hardware when entering STOP and STANDBY modes. + * @note HSI14 can not be stopped if it is used as system clock source. In this case, + * you have to select another source of the system clock then stop the HSI14. + * @note When the HSI14 is stopped, HSI14RDY flag goes low after 6 HSI14 oscillator + * clock cycles. + */ +#define __HAL_RCC_HSI14_DISABLE() CLEAR_BIT(RCC->CR2, RCC_CR2_HSI14ON) + +/** @brief Macro to enable the Internal 14Mhz High Speed oscillator (HSI14) used by ADC. + */ +#define __HAL_RCC_HSI14ADC_ENABLE() CLEAR_BIT(RCC->CR2, RCC_CR2_HSI14DIS) + +/** @brief Macro to disable the Internal 14Mhz High Speed oscillator (HSI14) used by ADC. + */ +#define __HAL_RCC_HSI14ADC_DISABLE() SET_BIT(RCC->CR2, RCC_CR2_HSI14DIS) + +/** @brief Macro to adjust the Internal 14Mhz High Speed oscillator (HSI) calibration value. + * @note The calibration is used to compensate for the variations in voltage + * and temperature that influence the frequency of the internal HSI14 RC. + * @param __HSI14CALIBRATIONVALUE__ specifies the calibration trimming value + * (default is RCC_HSI14CALIBRATION_DEFAULT). + * This parameter must be a number between 0 and 0x1F. + */ +#define __HAL_RCC_HSI14_CALIBRATIONVALUE_ADJUST(__HSI14CALIBRATIONVALUE__) \ + MODIFY_REG(RCC->CR2, RCC_CR2_HSI14TRIM, (uint32_t)(__HSI14CALIBRATIONVALUE__) << RCC_HSI14TRIM_BIT_NUMBER) +/** + * @} + */ + +/** @defgroup RCC_USARTx_Clock_Config RCC USARTx Clock Config + * @{ + */ + +/** @brief Macro to configure the USART1 clock (USART1CLK). + * @param __USART1CLKSOURCE__ specifies the USART1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_HSI HSI selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_SYSCLK System Clock selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_LSE LSE selected as USART1 clock + */ +#define __HAL_RCC_USART1_CONFIG(__USART1CLKSOURCE__) \ + MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART1SW, (uint32_t)(__USART1CLKSOURCE__)) + +/** @brief Macro to get the USART1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_HSI HSI selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_SYSCLK System Clock selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_LSE LSE selected as USART1 clock + */ +#define __HAL_RCC_GET_USART1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART1SW))) + +/** + * @} + */ + +/** @defgroup RCC_I2Cx_Clock_Config RCC I2Cx Clock Config + * @{ + */ + +/** @brief Macro to configure the I2C1 clock (I2C1CLK). + * @param __I2C1CLKSOURCE__ specifies the I2C1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_I2C1CLKSOURCE_HSI HSI selected as I2C1 clock + * @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock + */ +#define __HAL_RCC_I2C1_CONFIG(__I2C1CLKSOURCE__) \ + MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C1SW, (uint32_t)(__I2C1CLKSOURCE__)) + +/** @brief Macro to get the I2C1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_I2C1CLKSOURCE_HSI HSI selected as I2C1 clock + * @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock + */ +#define __HAL_RCC_GET_I2C1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C1SW))) +/** + * @} + */ + +/** @defgroup RCC_PLL_Configuration PLL Configuration + * @{ + */ + +/** @brief Macro to enable the main PLL. + * @note After enabling the main PLL, the application software should wait on + * PLLRDY flag to be set indicating that PLL clock is stable and can + * be used as system clock source. + * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes. + */ +#define __HAL_RCC_PLL_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLLON) + +/** @brief Macro to disable the main PLL. + * @note The main PLL can not be disabled if it is used as system clock source + */ +#define __HAL_RCC_PLL_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLLON) + +/** @brief Macro to configure the PLL clock source, multiplication and division factors. + * @note This function must be used only when the main PLL is disabled. + * + * @param __RCC_PLLSOURCE__ specifies the PLL entry clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_PLLSOURCE_HSI HSI oscillator clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL clock entry + * @param __PLLMUL__ specifies the multiplication factor for PLL VCO output clock + * This parameter can be one of the following values: + * This parameter must be a number between RCC_PLL_MUL2 and RCC_PLL_MUL16. + * @param __PREDIV__ specifies the predivider factor for PLL VCO input clock + * This parameter must be a number between RCC_PREDIV_DIV1 and RCC_PREDIV_DIV16. + * + */ +#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSOURCE__ , __PREDIV__, __PLLMUL__) \ + do { \ + MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, (__PREDIV__)); \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_PLLMUL | RCC_CFGR_PLLSRC, (uint32_t)((__PLLMUL__)|(__RCC_PLLSOURCE__))); \ + } while(0U) + + +/** @brief Get oscillator clock selected as PLL input clock + * @retval The clock source used for PLL entry. The returned value can be one + * of the following: + * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL input clock + */ +#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLSRC))) + +/** + * @} + */ + +/** @defgroup RCC_Get_Clock_source Get Clock source + * @{ + */ + +/** + * @brief Macro to configure the system clock source. + * @param __SYSCLKSOURCE__ specifies the system clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_SYSCLKSOURCE_HSI HSI oscillator is used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_HSE HSE oscillator is used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_PLLCLK PLL output is used as system clock source. + */ +#define __HAL_RCC_SYSCLK_CONFIG(__SYSCLKSOURCE__) \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__SYSCLKSOURCE__)) + +/** @brief Macro to get the clock source used as system clock. + * @retval The clock source used as system clock. The returned value can be one + * of the following: + * @arg @ref RCC_SYSCLKSOURCE_STATUS_HSI HSI used as system clock + * @arg @ref RCC_SYSCLKSOURCE_STATUS_HSE HSE used as system clock + * @arg @ref RCC_SYSCLKSOURCE_STATUS_PLLCLK PLL used as system clock + */ +#define __HAL_RCC_GET_SYSCLK_SOURCE() ((uint32_t)(RCC->CFGR & RCC_CFGR_SWS)) + +/** + * @} + */ + +/** @defgroup RCCEx_MCOx_Clock_Config RCC Extended MCOx Clock Config + * @{ + */ + +#if defined(RCC_CFGR_MCOPRE) +/** @brief Macro to configure the MCO clock. + * @param __MCOCLKSOURCE__ specifies the MCO clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1SOURCE_NOCLOCK No clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_SYSCLK System Clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSI HSI oscillator clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSE HSE selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_LSI LSI selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_LSE LSE selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSI14 HSI14 selected as MCO clock + @if STM32F042x6 + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F048xx + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F071xB + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F072xB + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F078xx + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F091xC + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F098xx + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F030x6 + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F030xC + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F031x6 + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F038xx + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F070x6 + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @elseif STM32F070xB + * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock + @endif + * @arg @ref RCC_MCO1SOURCE_PLLCLK_DIV2 PLLCLK Divided by 2 selected as MCO clock + * @param __MCODIV__ specifies the MCO clock prescaler. + * This parameter can be one of the following values: + * @arg @ref RCC_MCODIV_1 MCO clock source is divided by 1 + * @arg @ref RCC_MCODIV_2 MCO clock source is divided by 2 + * @arg @ref RCC_MCODIV_4 MCO clock source is divided by 4 + * @arg @ref RCC_MCODIV_8 MCO clock source is divided by 8 + * @arg @ref RCC_MCODIV_16 MCO clock source is divided by 16 + * @arg @ref RCC_MCODIV_32 MCO clock source is divided by 32 + * @arg @ref RCC_MCODIV_64 MCO clock source is divided by 64 + * @arg @ref RCC_MCODIV_128 MCO clock source is divided by 128 + */ +#else +/** @brief Macro to configure the MCO clock. + * @param __MCOCLKSOURCE__ specifies the MCO clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1SOURCE_NOCLOCK No clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_SYSCLK System Clock selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSI HSI selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSE HSE selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_LSI LSI selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_LSE LSE selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_HSI14 HSI14 selected as MCO clock + * @arg @ref RCC_MCO1SOURCE_PLLCLK_DIV2 PLLCLK Divided by 2 selected as MCO clock + * @param __MCODIV__ specifies the MCO clock prescaler. + * This parameter can be one of the following values: + * @arg @ref RCC_MCODIV_1 No division applied on MCO clock source + */ +#endif +#if defined(RCC_CFGR_MCOPRE) +#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO | RCC_CFGR_MCOPRE), ((__MCOCLKSOURCE__) | (__MCODIV__))) +#else + +#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_MCO, (__MCOCLKSOURCE__)) + +#endif + +/** + * @} + */ + + /** @defgroup RCC_RTC_Clock_Configuration RCC RTC Clock Configuration + * @{ + */ + +/** @brief Macro to configure the RTC clock (RTCCLK). + * @note As the RTC clock configuration bits are in the Backup domain and write + * access is denied to this domain after reset, you have to enable write + * access using the Power Backup Access macro before to configure + * the RTC clock source (to be done once after reset). + * @note Once the RTC clock is configured it cannot be changed unless the + * Backup domain is reset using @ref __HAL_RCC_BACKUPRESET_FORCE() macro, or by + * a Power On Reset (POR). + * + * @param __RTC_CLKSOURCE__ specifies the RTC clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_RTCCLKSOURCE_NO_CLK No clock selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV32 HSE clock divided by 32 + * @note If the LSE or LSI is used as RTC clock source, the RTC continues to + * work in STOP and STANDBY modes, and can be used as wakeup source. + * However, when the LSI clock and HSE clock divided by 32 is used as RTC clock source, + * the RTC cannot be used in STOP and STANDBY modes. + * @note The system must always be configured so as to get a PCLK frequency greater than or + * equal to the RTCCLK frequency for a proper operation of the RTC. + */ +#define __HAL_RCC_RTC_CONFIG(__RTC_CLKSOURCE__) MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, (__RTC_CLKSOURCE__)) + +/** @brief Macro to get the RTC clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_RTCCLKSOURCE_NO_CLK No clock selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV32 HSE clock divided by 32 + */ +#define __HAL_RCC_GET_RTC_SOURCE() (READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)) + +/** @brief Macro to enable the the RTC clock. + * @note These macros must be used only after the RTC clock source was selected. + */ +#define __HAL_RCC_RTC_ENABLE() SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN) + +/** @brief Macro to disable the the RTC clock. + * @note These macros must be used only after the RTC clock source was selected. + */ +#define __HAL_RCC_RTC_DISABLE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN) + +/** @brief Macro to force the Backup domain reset. + * @note This function resets the RTC peripheral (including the backup registers) + * and the RTC clock source selection in RCC_BDCR register. + */ +#define __HAL_RCC_BACKUPRESET_FORCE() SET_BIT(RCC->BDCR, RCC_BDCR_BDRST) + +/** @brief Macros to release the Backup domain reset. + */ +#define __HAL_RCC_BACKUPRESET_RELEASE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST) + +/** + * @} + */ + +/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management + * @brief macros to manage the specified RCC Flags and interrupts. + * @{ + */ + +/** @brief Enable RCC interrupt. + * @param __INTERRUPT__ specifies the RCC interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_PLLRDY main PLL ready interrupt + * @arg @ref RCC_IT_HSI14RDY HSI14 ready interrupt + @if STM32F042x6 + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F048xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F071xB + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F072xB + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F078xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F091xC + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F098xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @endif + */ +#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS |= (__INTERRUPT__)) + +/** @brief Disable RCC interrupt. + * @param __INTERRUPT__ specifies the RCC interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_PLLRDY main PLL ready interrupt + * @arg @ref RCC_IT_HSI14RDY HSI14 ready interrupt + @if STM32F042x6 + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F048xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F071xB + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F072xB + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F078xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F091xC + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F098xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @endif + */ +#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS &= (uint8_t)(~(__INTERRUPT__))) + +/** @brief Clear the RCC's interrupt pending bits. + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt. + * @arg @ref RCC_IT_LSERDY LSE ready interrupt. + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt. + * @arg @ref RCC_IT_HSERDY HSE ready interrupt. + * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt. + * @arg @ref RCC_IT_CSS Clock Security System interrupt + * @arg @ref RCC_IT_HSI14RDY HSI14 ready interrupt + @if STM32F042x6 + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F048xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F071xB + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F072xB + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F078xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F091xC + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F098xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @endif + */ +#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE2_ADDRESS = (__INTERRUPT__)) + +/** @brief Check the RCC's interrupt has occurred or not. + * @param __INTERRUPT__ specifies the RCC interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt. + * @arg @ref RCC_IT_LSERDY LSE ready interrupt. + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt. + * @arg @ref RCC_IT_HSERDY HSE ready interrupt. + * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt. + * @arg @ref RCC_IT_CSS Clock Security System interrupt + * @arg @ref RCC_IT_HSI14RDY HSI14 ready interrupt enable + @if STM32F042x6 + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F048xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F071xB + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F072xB + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F078xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F091xC + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @elseif STM32F098xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + @endif + * @retval The new state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIR & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** @brief Set RMVF bit to clear the reset flags. + * The reset flags are RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST, + * RCC_FLAG_OBLRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST + */ +#define __HAL_RCC_CLEAR_RESET_FLAGS() (RCC->CSR |= RCC_CSR_RMVF) + +/** @brief Check RCC flag is set or not. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref RCC_FLAG_HSIRDY HSI oscillator clock ready. + * @arg @ref RCC_FLAG_HSERDY HSE oscillator clock ready. + * @arg @ref RCC_FLAG_PLLRDY Main PLL clock ready. + * @arg @ref RCC_FLAG_HSI14RDY HSI14 oscillator clock ready + @if STM32F038xx + * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain + @elseif STM32F042x6 + * @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready + @elseif STM32F048xx + * @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready + * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain + @elseif STM32F058xx + * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain + @elseif STM32F071xB + * @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready + @elseif STM32F072xB + * @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready + @elseif STM32F078xx + * @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready + * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain + @elseif STM32F091xC + * @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready + @elseif STM32F098xx + * @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready + * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain + @endif + * @arg @ref RCC_FLAG_LSERDY LSE oscillator clock ready. + * @arg @ref RCC_FLAG_LSIRDY LSI oscillator clock ready. + * @arg @ref RCC_FLAG_OBLRST Option Byte Load reset + * @arg @ref RCC_FLAG_PINRST Pin reset. + * @arg @ref RCC_FLAG_PORRST POR/PDR reset. + * @arg @ref RCC_FLAG_SFTRST Software reset. + * @arg @ref RCC_FLAG_IWDGRST Independent Watchdog reset. + * @arg @ref RCC_FLAG_WWDGRST Window Watchdog reset. + * @arg @ref RCC_FLAG_LPWRRST Low Power reset. + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_RCC_GET_FLAG(__FLAG__) (((((__FLAG__) >> 5U) == CR_REG_INDEX)? RCC->CR : \ + (((__FLAG__) >> 5U) == CR2_REG_INDEX)? RCC->CR2 : \ + (((__FLAG__) >> 5U) == BDCR_REG_INDEX) ? RCC->BDCR : \ + RCC->CSR) & (1U << ((__FLAG__) & RCC_FLAG_MASK))) + +/** + * @} + */ + +/** + * @} + */ + +/* Include RCC HAL Extension module */ +#include "stm32f0xx_hal_rcc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCC_Exported_Functions + * @{ + */ + +/** @addtogroup RCC_Exported_Functions_Group1 + * @{ + */ + +/* Initialization and de-initialization functions ******************************/ +HAL_StatusTypeDef HAL_RCC_DeInit(void); +HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); +HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency); + +/** + * @} + */ + +/** @addtogroup RCC_Exported_Functions_Group2 + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv); +void HAL_RCC_EnableCSS(void); +/* CSS NMI IRQ handler */ +void HAL_RCC_NMI_IRQHandler(void); +/* User Callbacks in non blocking mode (IT mode) */ +void HAL_RCC_CSSCallback(void); +void HAL_RCC_DisableCSS(void); +uint32_t HAL_RCC_GetSysClockFreq(void); +uint32_t HAL_RCC_GetHCLKFreq(void); +uint32_t HAL_RCC_GetPCLK1Freq(void); +void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); +void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_HAL_RCC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + -- cgit