From 6ab94e0b318884bbcb95e2ea3835f951502e1d99 Mon Sep 17 00:00:00 2001 From: jaseg Date: Wed, 14 Oct 2020 12:47:28 +0200 Subject: Move firmware into subdirectory --- .../FilteringFunctions/arm_fir_interpolate_q15.c | 496 +++++++++++++++++++++ 1 file changed, 496 insertions(+) create mode 100644 fw/hid-dials/Drivers/CMSIS/DSP/Source/FilteringFunctions/arm_fir_interpolate_q15.c (limited to 'fw/hid-dials/Drivers/CMSIS/DSP/Source/FilteringFunctions/arm_fir_interpolate_q15.c') diff --git a/fw/hid-dials/Drivers/CMSIS/DSP/Source/FilteringFunctions/arm_fir_interpolate_q15.c b/fw/hid-dials/Drivers/CMSIS/DSP/Source/FilteringFunctions/arm_fir_interpolate_q15.c new file mode 100644 index 0000000..1cedd25 --- /dev/null +++ b/fw/hid-dials/Drivers/CMSIS/DSP/Source/FilteringFunctions/arm_fir_interpolate_q15.c @@ -0,0 +1,496 @@ +/* ---------------------------------------------------------------------- + * Project: CMSIS DSP Library + * Title: arm_fir_interpolate_q15.c + * Description: Q15 FIR interpolation + * + * $Date: 27. January 2017 + * $Revision: V.1.5.1 + * + * Target Processor: Cortex-M cores + * -------------------------------------------------------------------- */ +/* + * Copyright (C) 2010-2017 ARM Limited or its affiliates. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#include "arm_math.h" + +/** + * @ingroup groupFilters + */ + +/** + * @addtogroup FIR_Interpolate + * @{ + */ + +/** + * @brief Processing function for the Q15 FIR interpolator. + * @param[in] *S points to an instance of the Q15 FIR interpolator structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of input samples to process per call. + * @return none. + * + * Scaling and Overflow Behavior: + * \par + * The function is implemented using a 64-bit internal accumulator. + * Both coefficients and state variables are represented in 1.15 format and multiplications yield a 2.30 result. + * The 2.30 intermediate results are accumulated in a 64-bit accumulator in 34.30 format. + * There is no risk of internal overflow with this approach and the full precision of intermediate multiplications is preserved. + * After all additions have been performed, the accumulator is truncated to 34.15 format by discarding low 15 bits. + * Lastly, the accumulator is saturated to yield a result in 1.15 format. + */ + +#if defined (ARM_MATH_DSP) + + /* Run the below code for Cortex-M4 and Cortex-M3 */ + +void arm_fir_interpolate_q15( + const arm_fir_interpolate_instance_q15 * S, + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize) +{ + q15_t *pState = S->pState; /* State pointer */ + q15_t *pCoeffs = S->pCoeffs; /* Coefficient pointer */ + q15_t *pStateCurnt; /* Points to the current sample of the state */ + q15_t *ptr1, *ptr2; /* Temporary pointers for state and coefficient buffers */ + q63_t sum0; /* Accumulators */ + q15_t x0, c0; /* Temporary variables to hold state and coefficient values */ + uint32_t i, blkCnt, j, tapCnt; /* Loop counters */ + uint16_t phaseLen = S->phaseLength; /* Length of each polyphase filter component */ + uint32_t blkCntN2; + q63_t acc0, acc1; + q15_t x1; + + /* S->pState buffer contains previous frame (phaseLen - 1) samples */ + /* pStateCurnt points to the location where the new input data should be written */ + pStateCurnt = S->pState + ((q31_t) phaseLen - 1); + + /* Initialise blkCnt */ + blkCnt = blockSize / 2; + blkCntN2 = blockSize - (2 * blkCnt); + + /* Samples loop unrolled by 2 */ + while (blkCnt > 0U) + { + /* Copy new input sample into the state buffer */ + *pStateCurnt++ = *pSrc++; + *pStateCurnt++ = *pSrc++; + + /* Address modifier index of coefficient buffer */ + j = 1U; + + /* Loop over the Interpolation factor. */ + i = (S->L); + + while (i > 0U) + { + /* Set accumulator to zero */ + acc0 = 0; + acc1 = 0; + + /* Initialize state pointer */ + ptr1 = pState; + + /* Initialize coefficient pointer */ + ptr2 = pCoeffs + (S->L - j); + + /* Loop over the polyPhase length. Unroll by a factor of 4. + ** Repeat until we've computed numTaps-(4*S->L) coefficients. */ + tapCnt = phaseLen >> 2U; + + x0 = *(ptr1++); + + while (tapCnt > 0U) + { + + /* Read the input sample */ + x1 = *(ptr1++); + + /* Read the coefficient */ + c0 = *(ptr2); + + /* Perform the multiply-accumulate */ + acc0 += (q63_t) x0 *c0; + acc1 += (q63_t) x1 *c0; + + + /* Read the coefficient */ + c0 = *(ptr2 + S->L); + + /* Read the input sample */ + x0 = *(ptr1++); + + /* Perform the multiply-accumulate */ + acc0 += (q63_t) x1 *c0; + acc1 += (q63_t) x0 *c0; + + + /* Read the coefficient */ + c0 = *(ptr2 + S->L * 2); + + /* Read the input sample */ + x1 = *(ptr1++); + + /* Perform the multiply-accumulate */ + acc0 += (q63_t) x0 *c0; + acc1 += (q63_t) x1 *c0; + + /* Read the coefficient */ + c0 = *(ptr2 + S->L * 3); + + /* Read the input sample */ + x0 = *(ptr1++); + + /* Perform the multiply-accumulate */ + acc0 += (q63_t) x1 *c0; + acc1 += (q63_t) x0 *c0; + + + /* Upsampling is done by stuffing L-1 zeros between each sample. + * So instead of multiplying zeros with coefficients, + * Increment the coefficient pointer by interpolation factor times. */ + ptr2 += 4 * S->L; + + /* Decrement the loop counter */ + tapCnt--; + } + + /* If the polyPhase length is not a multiple of 4, compute the remaining filter taps */ + tapCnt = phaseLen % 0x4U; + + while (tapCnt > 0U) + { + + /* Read the input sample */ + x1 = *(ptr1++); + + /* Read the coefficient */ + c0 = *(ptr2); + + /* Perform the multiply-accumulate */ + acc0 += (q63_t) x0 *c0; + acc1 += (q63_t) x1 *c0; + + /* Increment the coefficient pointer by interpolation factor times. */ + ptr2 += S->L; + + /* update states for next sample processing */ + x0 = x1; + + /* Decrement the loop counter */ + tapCnt--; + } + + /* The result is in the accumulator, store in the destination buffer. */ + *pDst = (q15_t) (__SSAT((acc0 >> 15), 16)); + *(pDst + S->L) = (q15_t) (__SSAT((acc1 >> 15), 16)); + + pDst++; + + /* Increment the address modifier index of coefficient buffer */ + j++; + + /* Decrement the loop counter */ + i--; + } + + /* Advance the state pointer by 1 + * to process the next group of interpolation factor number samples */ + pState = pState + 2; + + pDst += S->L; + + /* Decrement the loop counter */ + blkCnt--; + } + + /* If the blockSize is not a multiple of 2, compute any remaining output samples here. + ** No loop unrolling is used. */ + blkCnt = blkCntN2; + + /* Loop over the blockSize. */ + while (blkCnt > 0U) + { + /* Copy new input sample into the state buffer */ + *pStateCurnt++ = *pSrc++; + + /* Address modifier index of coefficient buffer */ + j = 1U; + + /* Loop over the Interpolation factor. */ + i = S->L; + while (i > 0U) + { + /* Set accumulator to zero */ + sum0 = 0; + + /* Initialize state pointer */ + ptr1 = pState; + + /* Initialize coefficient pointer */ + ptr2 = pCoeffs + (S->L - j); + + /* Loop over the polyPhase length. Unroll by a factor of 4. + ** Repeat until we've computed numTaps-(4*S->L) coefficients. */ + tapCnt = phaseLen >> 2; + while (tapCnt > 0U) + { + + /* Read the coefficient */ + c0 = *(ptr2); + + /* Upsampling is done by stuffing L-1 zeros between each sample. + * So instead of multiplying zeros with coefficients, + * Increment the coefficient pointer by interpolation factor times. */ + ptr2 += S->L; + + /* Read the input sample */ + x0 = *(ptr1++); + + /* Perform the multiply-accumulate */ + sum0 += (q63_t) x0 *c0; + + /* Read the coefficient */ + c0 = *(ptr2); + + /* Increment the coefficient pointer by interpolation factor times. */ + ptr2 += S->L; + + /* Read the input sample */ + x0 = *(ptr1++); + + /* Perform the multiply-accumulate */ + sum0 += (q63_t) x0 *c0; + + /* Read the coefficient */ + c0 = *(ptr2); + + /* Increment the coefficient pointer by interpolation factor times. */ + ptr2 += S->L; + + /* Read the input sample */ + x0 = *(ptr1++); + + /* Perform the multiply-accumulate */ + sum0 += (q63_t) x0 *c0; + + /* Read the coefficient */ + c0 = *(ptr2); + + /* Increment the coefficient pointer by interpolation factor times. */ + ptr2 += S->L; + + /* Read the input sample */ + x0 = *(ptr1++); + + /* Perform the multiply-accumulate */ + sum0 += (q63_t) x0 *c0; + + /* Decrement the loop counter */ + tapCnt--; + } + + /* If the polyPhase length is not a multiple of 4, compute the remaining filter taps */ + tapCnt = phaseLen & 0x3U; + + while (tapCnt > 0U) + { + /* Read the coefficient */ + c0 = *(ptr2); + + /* Increment the coefficient pointer by interpolation factor times. */ + ptr2 += S->L; + + /* Read the input sample */ + x0 = *(ptr1++); + + /* Perform the multiply-accumulate */ + sum0 += (q63_t) x0 *c0; + + /* Decrement the loop counter */ + tapCnt--; + } + + /* The result is in the accumulator, store in the destination buffer. */ + *pDst++ = (q15_t) (__SSAT((sum0 >> 15), 16)); + + j++; + + /* Decrement the loop counter */ + i--; + } + + /* Advance the state pointer by 1 + * to process the next group of interpolation factor number samples */ + pState = pState + 1; + + /* Decrement the loop counter */ + blkCnt--; + } + + + /* Processing is complete. + ** Now copy the last phaseLen - 1 samples to the satrt of the state buffer. + ** This prepares the state buffer for the next function call. */ + + /* Points to the start of the state buffer */ + pStateCurnt = S->pState; + + i = ((uint32_t) phaseLen - 1U) >> 2U; + + /* copy data */ + while (i > 0U) + { +#ifndef UNALIGNED_SUPPORT_DISABLE + + *__SIMD32(pStateCurnt)++ = *__SIMD32(pState)++; + *__SIMD32(pStateCurnt)++ = *__SIMD32(pState)++; + +#else + + *pStateCurnt++ = *pState++; + *pStateCurnt++ = *pState++; + *pStateCurnt++ = *pState++; + *pStateCurnt++ = *pState++; + +#endif /* #ifndef UNALIGNED_SUPPORT_DISABLE */ + + /* Decrement the loop counter */ + i--; + } + + i = ((uint32_t) phaseLen - 1U) % 0x04U; + + while (i > 0U) + { + *pStateCurnt++ = *pState++; + + /* Decrement the loop counter */ + i--; + } +} + +#else + + /* Run the below code for Cortex-M0 */ + +void arm_fir_interpolate_q15( + const arm_fir_interpolate_instance_q15 * S, + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize) +{ + q15_t *pState = S->pState; /* State pointer */ + q15_t *pCoeffs = S->pCoeffs; /* Coefficient pointer */ + q15_t *pStateCurnt; /* Points to the current sample of the state */ + q15_t *ptr1, *ptr2; /* Temporary pointers for state and coefficient buffers */ + q63_t sum; /* Accumulator */ + q15_t x0, c0; /* Temporary variables to hold state and coefficient values */ + uint32_t i, blkCnt, tapCnt; /* Loop counters */ + uint16_t phaseLen = S->phaseLength; /* Length of each polyphase filter component */ + + + /* S->pState buffer contains previous frame (phaseLen - 1) samples */ + /* pStateCurnt points to the location where the new input data should be written */ + pStateCurnt = S->pState + (phaseLen - 1U); + + /* Total number of intput samples */ + blkCnt = blockSize; + + /* Loop over the blockSize. */ + while (blkCnt > 0U) + { + /* Copy new input sample into the state buffer */ + *pStateCurnt++ = *pSrc++; + + /* Loop over the Interpolation factor. */ + i = S->L; + + while (i > 0U) + { + /* Set accumulator to zero */ + sum = 0; + + /* Initialize state pointer */ + ptr1 = pState; + + /* Initialize coefficient pointer */ + ptr2 = pCoeffs + (i - 1U); + + /* Loop over the polyPhase length */ + tapCnt = (uint32_t) phaseLen; + + while (tapCnt > 0U) + { + /* Read the coefficient */ + c0 = *ptr2; + + /* Increment the coefficient pointer by interpolation factor times. */ + ptr2 += S->L; + + /* Read the input sample */ + x0 = *ptr1++; + + /* Perform the multiply-accumulate */ + sum += ((q31_t) x0 * c0); + + /* Decrement the loop counter */ + tapCnt--; + } + + /* Store the result after converting to 1.15 format in the destination buffer */ + *pDst++ = (q15_t) (__SSAT((sum >> 15), 16)); + + /* Decrement the loop counter */ + i--; + } + + /* Advance the state pointer by 1 + * to process the next group of interpolation factor number samples */ + pState = pState + 1; + + /* Decrement the loop counter */ + blkCnt--; + } + + /* Processing is complete. + ** Now copy the last phaseLen - 1 samples to the start of the state buffer. + ** This prepares the state buffer for the next function call. */ + + /* Points to the start of the state buffer */ + pStateCurnt = S->pState; + + i = (uint32_t) phaseLen - 1U; + + while (i > 0U) + { + *pStateCurnt++ = *pState++; + + /* Decrement the loop counter */ + i--; + } + +} + +#endif /* #if defined (ARM_MATH_DSP) */ + + + /** + * @} end of FIR_Interpolate group + */ -- cgit