From 94f94260ace13688285fc8c62687079b26c18854 Mon Sep 17 00:00:00 2001 From: jaseg Date: Sun, 20 Dec 2020 15:18:02 +0100 Subject: Submodule-cache WIP --- fw/cdc-dials/Src/main.c | 175 ------------- fw/cdc-dials/Src/stm32f0xx_hal_msp.c | 191 -------------- fw/cdc-dials/Src/stm32f0xx_it.c | 167 ------------ fw/cdc-dials/Src/system_stm32f0xx.c | 265 ------------------- fw/cdc-dials/Src/usbd_cdc_interface.c | 46 ---- fw/cdc-dials/Src/usbd_conf.c | 464 ---------------------------------- fw/cdc-dials/Src/usbd_desc.c | 265 ------------------- 7 files changed, 1573 deletions(-) delete mode 100644 fw/cdc-dials/Src/main.c delete mode 100644 fw/cdc-dials/Src/stm32f0xx_hal_msp.c delete mode 100644 fw/cdc-dials/Src/stm32f0xx_it.c delete mode 100644 fw/cdc-dials/Src/system_stm32f0xx.c delete mode 100644 fw/cdc-dials/Src/usbd_cdc_interface.c delete mode 100644 fw/cdc-dials/Src/usbd_conf.c delete mode 100644 fw/cdc-dials/Src/usbd_desc.c (limited to 'fw/cdc-dials/Src') diff --git a/fw/cdc-dials/Src/main.c b/fw/cdc-dials/Src/main.c deleted file mode 100644 index e1fbcc4..0000000 --- a/fw/cdc-dials/Src/main.c +++ /dev/null @@ -1,175 +0,0 @@ - -#include "main.h" - -//#define APP_TX_DATA_SIZE 64 - -ADC_HandleTypeDef hadc; -DMA_HandleTypeDef hdma_adc; - -PCD_HandleTypeDef hpcd_USB_FS; -PCD_HandleTypeDef USBD_Device; - -void SystemClock_Config(void); -static void MX_GPIO_Init(void); -static void MX_DMA_Init(void); -static void MX_ADC_Init(void); -static void MX_USB_PCD_Init(void); - -uint16_t ADCval[8]; - -extern uint8_t UserTxBuffer[APP_TX_DATA_SIZE]; - -int main(void) -{ - HAL_Init(); - - SystemClock_Config(); - - MX_GPIO_Init(); - MX_DMA_Init(); - MX_ADC_Init(); - - HAL_ADC_Start_DMA(&hadc, ADCval, 8); - - USBD_Init(&USBD_Device, &VCP_Desc, 0); - USBD_RegisterClass(&USBD_Device, &USBD_CDC); - USBD_CDC_RegisterInterface(&USBD_Device, &USBD_CDC_fops); - USBD_Start(&USBD_Device); - - while (1) - { - HAL_GPIO_WritePin(GPIOB,GPIO_PIN_13,1); - HAL_Delay(50); - HAL_GPIO_WritePin(GPIOB,GPIO_PIN_13,0); - HAL_Delay(50); - memset(UserTxBuffer, 0, APP_TX_DATA_SIZE); - sprintf(UserTxBuffer, "%d \t %d \t %d \t %d \t %d \t %d \t %d \t %d \r\n", ADCval[0], ADCval[1], ADCval[2], ADCval[3], ADCval[4], ADCval[5], ADCval[6], ADCval[7]); - USBD_CDC_SetTxBuffer(&USBD_Device, (uint8_t*)&UserTxBuffer[0], APP_TX_DATA_SIZE); - USBD_CDC_TransmitPacket(&USBD_Device); - } -} - -void SystemClock_Config(void) -{ - RCC_OscInitTypeDef RCC_OscInitStruct = {0}; - RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; - RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; - - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI14|RCC_OSCILLATORTYPE_HSI48; - RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; - RCC_OscInitStruct.HSI14State = RCC_HSI14_ON; - RCC_OscInitStruct.HSI14CalibrationValue = 16; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK - |RCC_CLOCKTYPE_PCLK1; - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI48; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1); - - PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB; - PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_HSI48; - HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit); - -} - -static void MX_ADC_Init(void) -{ - - ADC_ChannelConfTypeDef sConfig = {0}; - - hadc.Instance = ADC1; - hadc.Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV1; - hadc.Init.Resolution = ADC_RESOLUTION_12B; - hadc.Init.DataAlign = ADC_DATAALIGN_RIGHT; - hadc.Init.ScanConvMode = ADC_SCAN_DIRECTION_FORWARD; - hadc.Init.EOCSelection = ADC_EOC_SEQ_CONV; - hadc.Init.LowPowerAutoWait = DISABLE; - hadc.Init.LowPowerAutoPowerOff = DISABLE; - hadc.Init.ContinuousConvMode = ENABLE; - hadc.Init.DiscontinuousConvMode = DISABLE; - hadc.Init.ExternalTrigConv = ADC_SOFTWARE_START; - hadc.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE; - hadc.Init.DMAContinuousRequests = ENABLE; - hadc.Init.Overrun = ADC_OVR_DATA_PRESERVED; - HAL_ADC_Init(&hadc); - - sConfig.Rank = ADC_RANK_CHANNEL_NUMBER; - sConfig.SamplingTime = ADC_SAMPLETIME_239CYCLES_5; - sConfig.Channel = ADC_CHANNEL_1; - HAL_ADC_ConfigChannel(&hadc, &sConfig); - - sConfig.Channel = ADC_CHANNEL_2; - HAL_ADC_ConfigChannel(&hadc, &sConfig); - - sConfig.Channel = ADC_CHANNEL_3; - HAL_ADC_ConfigChannel(&hadc, &sConfig); - - sConfig.Channel = ADC_CHANNEL_4; - HAL_ADC_ConfigChannel(&hadc, &sConfig); - - sConfig.Channel = ADC_CHANNEL_5; - HAL_ADC_ConfigChannel(&hadc, &sConfig); - - sConfig.Channel = ADC_CHANNEL_6; - HAL_ADC_ConfigChannel(&hadc, &sConfig); - - sConfig.Channel = ADC_CHANNEL_7; - HAL_ADC_ConfigChannel(&hadc, &sConfig); - - sConfig.Channel = ADC_CHANNEL_8; - HAL_ADC_ConfigChannel(&hadc, &sConfig); -} - - -static void MX_USB_PCD_Init(void) -{ - - hpcd_USB_FS.Instance = USB; - hpcd_USB_FS.Init.dev_endpoints = 8; - hpcd_USB_FS.Init.speed = PCD_SPEED_FULL; - hpcd_USB_FS.Init.phy_itface = PCD_PHY_EMBEDDED; - hpcd_USB_FS.Init.low_power_enable = DISABLE; - hpcd_USB_FS.Init.lpm_enable = DISABLE; - hpcd_USB_FS.Init.battery_charging_enable = DISABLE; - HAL_PCD_Init(&hpcd_USB_FS); -} - - -static void MX_DMA_Init(void) -{ - __HAL_RCC_DMA1_CLK_ENABLE(); - - HAL_NVIC_SetPriority(DMA1_Channel1_IRQn, 0, 0); - HAL_NVIC_EnableIRQ(DMA1_Channel1_IRQn); -} - - -static void MX_GPIO_Init(void) -{ - - GPIO_InitTypeDef GPIO_InitStruct = {0}; - - __HAL_RCC_GPIOB_CLK_ENABLE(); - __HAL_RCC_GPIOA_CLK_ENABLE(); - - HAL_GPIO_WritePin(GPIOB, GPIO_PIN_13, GPIO_PIN_RESET); - - GPIO_InitStruct.Pin = GPIO_PIN_13; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; - HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); -} - -void Error_Handler(void) -{ - while(1){ - HAL_GPIO_WritePin(GPIOB,GPIO_PIN_13,1); - HAL_Delay(100); - HAL_GPIO_WritePin(GPIOB,GPIO_PIN_13,0); - HAL_Delay(100); - } -} diff --git a/fw/cdc-dials/Src/stm32f0xx_hal_msp.c b/fw/cdc-dials/Src/stm32f0xx_hal_msp.c deleted file mode 100644 index 8695580..0000000 --- a/fw/cdc-dials/Src/stm32f0xx_hal_msp.c +++ /dev/null @@ -1,191 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * File Name : stm32f0xx_hal_msp.c - * Description : This file provides code for the MSP Initialization - * and de-Initialization codes. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2020 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ -/* USER CODE END Header */ - -/* Includes ------------------------------------------------------------------*/ -#include "main.h" -/* USER CODE BEGIN Includes */ - -/* USER CODE END Includes */ -extern DMA_HandleTypeDef hdma_adc; - -/* Private typedef -----------------------------------------------------------*/ -/* USER CODE BEGIN TD */ - -/* USER CODE END TD */ - -/* Private define ------------------------------------------------------------*/ -/* USER CODE BEGIN Define */ - -/* USER CODE END Define */ - -/* Private macro -------------------------------------------------------------*/ -/* USER CODE BEGIN Macro */ - -/* USER CODE END Macro */ - -/* Private variables ---------------------------------------------------------*/ -/* USER CODE BEGIN PV */ - -/* USER CODE END PV */ - -/* Private function prototypes -----------------------------------------------*/ -/* USER CODE BEGIN PFP */ - -/* USER CODE END PFP */ - -/* External functions --------------------------------------------------------*/ -/* USER CODE BEGIN ExternalFunctions */ - -/* USER CODE END ExternalFunctions */ - -/* USER CODE BEGIN 0 */ - -/* USER CODE END 0 */ -/** - * Initializes the Global MSP. - */ -void HAL_MspInit(void) -{ - /* USER CODE BEGIN MspInit 0 */ - - /* USER CODE END MspInit 0 */ - - __HAL_RCC_SYSCFG_CLK_ENABLE(); - __HAL_RCC_PWR_CLK_ENABLE(); - - /* System interrupt init*/ - - /* USER CODE BEGIN MspInit 1 */ - - /* USER CODE END MspInit 1 */ -} - -/** -* @brief ADC MSP Initialization -* This function configures the hardware resources used in this example -* @param hadc: ADC handle pointer -* @retval None -*/ -void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc) -{ - GPIO_InitTypeDef GPIO_InitStruct = {0}; - if(hadc->Instance==ADC1) - { - /* USER CODE BEGIN ADC1_MspInit 0 */ - - /* USER CODE END ADC1_MspInit 0 */ - /* Peripheral clock enable */ - __HAL_RCC_ADC1_CLK_ENABLE(); - - __HAL_RCC_GPIOA_CLK_ENABLE(); - __HAL_RCC_GPIOB_CLK_ENABLE(); - /**ADC GPIO Configuration - PA0 ------> ADC_IN0 - PA1 ------> ADC_IN1 - PA2 ------> ADC_IN2 - PA3 ------> ADC_IN3 - PA4 ------> ADC_IN4 - PA5 ------> ADC_IN5 - PA6 ------> ADC_IN6 - PA7 ------> ADC_IN7 - PB0 ------> ADC_IN8 - */ - GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3 - |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7; - GPIO_InitStruct.Mode = GPIO_MODE_ANALOG; - GPIO_InitStruct.Pull = GPIO_NOPULL; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - GPIO_InitStruct.Pin = GPIO_PIN_0; - GPIO_InitStruct.Mode = GPIO_MODE_ANALOG; - GPIO_InitStruct.Pull = GPIO_NOPULL; - HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); - - /* ADC1 DMA Init */ - /* ADC Init */ - hdma_adc.Instance = DMA1_Channel1; - hdma_adc.Init.Direction = DMA_PERIPH_TO_MEMORY; - hdma_adc.Init.PeriphInc = DMA_PINC_DISABLE; - hdma_adc.Init.MemInc = DMA_MINC_ENABLE; - hdma_adc.Init.PeriphDataAlignment = DMA_PDATAALIGN_HALFWORD; - hdma_adc.Init.MemDataAlignment = DMA_MDATAALIGN_HALFWORD; - hdma_adc.Init.Mode = DMA_CIRCULAR; - hdma_adc.Init.Priority = DMA_PRIORITY_MEDIUM; - if (HAL_DMA_Init(&hdma_adc) != HAL_OK) - { - Error_Handler(); - } - - __HAL_LINKDMA(hadc,DMA_Handle,hdma_adc); - - /* USER CODE BEGIN ADC1_MspInit 1 */ - - /* USER CODE END ADC1_MspInit 1 */ - } - -} - -/** -* @brief ADC MSP De-Initialization -* This function freeze the hardware resources used in this example -* @param hadc: ADC handle pointer -* @retval None -*/ -void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc) -{ - if(hadc->Instance==ADC1) - { - /* USER CODE BEGIN ADC1_MspDeInit 0 */ - - /* USER CODE END ADC1_MspDeInit 0 */ - /* Peripheral clock disable */ - __HAL_RCC_ADC1_CLK_DISABLE(); - - /**ADC GPIO Configuration - PA0 ------> ADC_IN0 - PA1 ------> ADC_IN1 - PA2 ------> ADC_IN2 - PA3 ------> ADC_IN3 - PA4 ------> ADC_IN4 - PA5 ------> ADC_IN5 - PA6 ------> ADC_IN6 - PA7 ------> ADC_IN7 - PB0 ------> ADC_IN8 - */ - HAL_GPIO_DeInit(GPIOA, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3 - |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7); - - HAL_GPIO_DeInit(GPIOB, GPIO_PIN_0); - - /* ADC1 DMA DeInit */ - HAL_DMA_DeInit(hadc->DMA_Handle); - /* USER CODE BEGIN ADC1_MspDeInit 1 */ - - /* USER CODE END ADC1_MspDeInit 1 */ - } - -} - -/* USER CODE BEGIN 1 */ - -/* USER CODE END 1 */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/fw/cdc-dials/Src/stm32f0xx_it.c b/fw/cdc-dials/Src/stm32f0xx_it.c deleted file mode 100644 index 37cbede..0000000 --- a/fw/cdc-dials/Src/stm32f0xx_it.c +++ /dev/null @@ -1,167 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file stm32f0xx_it.c - * @brief Interrupt Service Routines. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2020 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ -/* USER CODE END Header */ - -/* Includes ------------------------------------------------------------------*/ -#include "main.h" -#include "stm32f0xx_it.h" -/* Private includes ----------------------------------------------------------*/ -/* USER CODE BEGIN Includes */ -/* USER CODE END Includes */ -extern PCD_HandleTypeDef hpcd; - -/* Private typedef -----------------------------------------------------------*/ -/* USER CODE BEGIN TD */ - -/* USER CODE END TD */ - -/* Private define ------------------------------------------------------------*/ -/* USER CODE BEGIN PD */ - -/* USER CODE END PD */ - -/* Private macro -------------------------------------------------------------*/ -/* USER CODE BEGIN PM */ - -/* USER CODE END PM */ - -/* Private variables ---------------------------------------------------------*/ -/* USER CODE BEGIN PV */ - -/* USER CODE END PV */ - -/* Private function prototypes -----------------------------------------------*/ -/* USER CODE BEGIN PFP */ - -/* USER CODE END PFP */ - -/* Private user code ---------------------------------------------------------*/ -/* USER CODE BEGIN 0 */ - -/* USER CODE END 0 */ - -/* External variables --------------------------------------------------------*/ -extern DMA_HandleTypeDef hdma_adc; -/* USER CODE BEGIN EV */ - -/* USER CODE END EV */ - -/******************************************************************************/ -/* Cortex-M0 Processor Interruption and Exception Handlers */ -/******************************************************************************/ -/** - * @brief This function handles Non maskable interrupt. - */ -void NMI_Handler(void) -{ - /* USER CODE BEGIN NonMaskableInt_IRQn 0 */ - - /* USER CODE END NonMaskableInt_IRQn 0 */ - /* USER CODE BEGIN NonMaskableInt_IRQn 1 */ - - /* USER CODE END NonMaskableInt_IRQn 1 */ -} - -/** - * @brief This function handles Hard fault interrupt. - */ -void HardFault_Handler(void) -{ - /* USER CODE BEGIN HardFault_IRQn 0 */ - - /* USER CODE END HardFault_IRQn 0 */ - while (1) - { - HAL_GPIO_WritePin(GPIOB,GPIO_PIN_13,1); - HAL_Delay(100); - HAL_GPIO_WritePin(GPIOB,GPIO_PIN_13,0); - HAL_Delay(100); - } -} - -/** - * @brief This function handles System service call via SWI instruction. - */ -void SVC_Handler(void) -{ - /* USER CODE BEGIN SVC_IRQn 0 */ - - /* USER CODE END SVC_IRQn 0 */ - /* USER CODE BEGIN SVC_IRQn 1 */ - - /* USER CODE END SVC_IRQn 1 */ -} - -/** - * @brief This function handles Pendable request for system service. - */ -void PendSV_Handler(void) -{ - /* USER CODE BEGIN PendSV_IRQn 0 */ - - /* USER CODE END PendSV_IRQn 0 */ - /* USER CODE BEGIN PendSV_IRQn 1 */ - - /* USER CODE END PendSV_IRQn 1 */ -} - -/** - * @brief This function handles System tick timer. - */ -void SysTick_Handler(void) -{ - /* USER CODE BEGIN SysTick_IRQn 0 */ - - /* USER CODE END SysTick_IRQn 0 */ - HAL_IncTick(); - /* USER CODE BEGIN SysTick_IRQn 1 */ - - /* USER CODE END SysTick_IRQn 1 */ -} - -/******************************************************************************/ -/* STM32F0xx Peripheral Interrupt Handlers */ -/* Add here the Interrupt Handlers for the used peripherals. */ -/* For the available peripheral interrupt handler names, */ -/* please refer to the startup file (startup_stm32f0xx.s). */ -/******************************************************************************/ - -/** - * @brief This function handles DMA1 channel 1 global interrupt. - */ -void DMA1_Channel1_IRQHandler(void) -{ - /* USER CODE BEGIN DMA1_Channel1_IRQn 0 */ - - /* USER CODE END DMA1_Channel1_IRQn 0 */ - HAL_DMA_IRQHandler(&hdma_adc); - /* USER CODE BEGIN DMA1_Channel1_IRQn 1 */ - - /* USER CODE END DMA1_Channel1_IRQn 1 */ -} - -/* USER CODE BEGIN 1 */ -void USB_IRQHandler(void) -{ - HAL_PCD_IRQHandler(&hpcd); -} - - -/* USER CODE END 1 */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/fw/cdc-dials/Src/system_stm32f0xx.c b/fw/cdc-dials/Src/system_stm32f0xx.c deleted file mode 100644 index 6a3202b..0000000 --- a/fw/cdc-dials/Src/system_stm32f0xx.c +++ /dev/null @@ -1,265 +0,0 @@ -/** - ****************************************************************************** - * @file system_stm32f0xx.c - * @author MCD Application Team - * @brief CMSIS Cortex-M0 Device Peripheral Access Layer System Source File. - * - * 1. This file provides two functions and one global variable to be called from - * user application: - * - SystemInit(): This function is called at startup just after reset and - * before branch to main program. This call is made inside - * the "startup_stm32f0xx.s" file. - * - * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used - * by the user application to setup the SysTick - * timer or configure other parameters. - * - * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must - * be called whenever the core clock is changed - * during program execution. - * - * 2. After each device reset the HSI (8 MHz) is used as system clock source. - * Then SystemInit() function is called, in "startup_stm32f0xx.s" file, to - * configure the system clock before to branch to main program. - * - * 3. This file configures the system clock as follows: - *============================================================================= - * Supported STM32F0xx device - *----------------------------------------------------------------------------- - * System Clock source | HSI - *----------------------------------------------------------------------------- - * SYSCLK(Hz) | 8000000 - *----------------------------------------------------------------------------- - * HCLK(Hz) | 8000000 - *----------------------------------------------------------------------------- - * AHB Prescaler | 1 - *----------------------------------------------------------------------------- - * APB1 Prescaler | 1 - *----------------------------------------------------------------------------- - *============================================================================= - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/** @addtogroup CMSIS - * @{ - */ - -/** @addtogroup stm32f0xx_system - * @{ - */ - -/** @addtogroup STM32F0xx_System_Private_Includes - * @{ - */ - -#include "stm32f0xx.h" - -/** - * @} - */ - -/** @addtogroup STM32F0xx_System_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @addtogroup STM32F0xx_System_Private_Defines - * @{ - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE ((uint32_t)8000000) /*!< Default value of the External oscillator in Hz. - This value can be provided and adapted by the user application. */ -#endif /* HSE_VALUE */ - -#if !defined (HSI_VALUE) - #define HSI_VALUE ((uint32_t)8000000) /*!< Default value of the Internal oscillator in Hz. - This value can be provided and adapted by the user application. */ -#endif /* HSI_VALUE */ - -#if !defined (HSI48_VALUE) -#define HSI48_VALUE ((uint32_t)48000000) /*!< Default value of the HSI48 Internal oscillator in Hz. - This value can be provided and adapted by the user application. */ -#endif /* HSI48_VALUE */ -/** - * @} - */ - -/** @addtogroup STM32F0xx_System_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @addtogroup STM32F0xx_System_Private_Variables - * @{ - */ - /* This variable is updated in three ways: - 1) by calling CMSIS function SystemCoreClockUpdate() - 2) by calling HAL API function HAL_RCC_GetHCLKFreq() - 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency - Note: If you use this function to configure the system clock there is no need to - call the 2 first functions listed above, since SystemCoreClock variable is - updated automatically. - */ -uint32_t SystemCoreClock = 8000000; - -const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; -const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4}; - -/** - * @} - */ - -/** @addtogroup STM32F0xx_System_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @addtogroup STM32F0xx_System_Private_Functions - * @{ - */ - -/** - * @brief Setup the microcontroller system. - * @param None - * @retval None - */ -void SystemInit(void) -{ - /* NOTE :SystemInit(): This function is called at startup just after reset and - before branch to main program. This call is made inside - the "startup_stm32f0xx.s" file. - User can setups the default system clock (System clock source, PLL Multiplier - and Divider factors, AHB/APBx prescalers and Flash settings). - */ -} - -/** - * @brief Update SystemCoreClock variable according to Clock Register Values. - * The SystemCoreClock variable contains the core clock (HCLK), it can - * be used by the user application to setup the SysTick timer or configure - * other parameters. - * - * @note Each time the core clock (HCLK) changes, this function must be called - * to update SystemCoreClock variable value. Otherwise, any configuration - * based on this variable will be incorrect. - * - * @note - The system frequency computed by this function is not the real - * frequency in the chip. It is calculated based on the predefined - * constant and the selected clock source: - * - * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) - * - * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) - * - * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) - * or HSI_VALUE(*) multiplied/divided by the PLL factors. - * - * (*) HSI_VALUE is a constant defined in stm32f0xx_hal.h file (default value - * 8 MHz) but the real value may vary depending on the variations - * in voltage and temperature. - * - * (**) HSE_VALUE is a constant defined in stm32f0xx_hal.h file (default value - * 8 MHz), user has to ensure that HSE_VALUE is same as the real - * frequency of the crystal used. Otherwise, this function may - * have wrong result. - * - * - The result of this function could be not correct when using fractional - * value for HSE crystal. - * - * @param None - * @retval None - */ -void SystemCoreClockUpdate (void) -{ - uint32_t tmp = 0, pllmull = 0, pllsource = 0, predivfactor = 0; - - /* Get SYSCLK source -------------------------------------------------------*/ - tmp = RCC->CFGR & RCC_CFGR_SWS; - - switch (tmp) - { - case RCC_CFGR_SWS_HSI: /* HSI used as system clock */ - SystemCoreClock = HSI_VALUE; - break; - case RCC_CFGR_SWS_HSE: /* HSE used as system clock */ - SystemCoreClock = HSE_VALUE; - break; - case RCC_CFGR_SWS_PLL: /* PLL used as system clock */ - /* Get PLL clock source and multiplication factor ----------------------*/ - pllmull = RCC->CFGR & RCC_CFGR_PLLMUL; - pllsource = RCC->CFGR & RCC_CFGR_PLLSRC; - pllmull = ( pllmull >> 18) + 2; - predivfactor = (RCC->CFGR2 & RCC_CFGR2_PREDIV) + 1; - - if (pllsource == RCC_CFGR_PLLSRC_HSE_PREDIV) - { - /* HSE used as PLL clock source : SystemCoreClock = HSE/PREDIV * PLLMUL */ - SystemCoreClock = (HSE_VALUE/predivfactor) * pllmull; - } -#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) - else if (pllsource == RCC_CFGR_PLLSRC_HSI48_PREDIV) - { - /* HSI48 used as PLL clock source : SystemCoreClock = HSI48/PREDIV * PLLMUL */ - SystemCoreClock = (HSI48_VALUE/predivfactor) * pllmull; - } -#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx */ - else - { -#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) \ - || defined(STM32F078xx) || defined(STM32F071xB) || defined(STM32F072xB) \ - || defined(STM32F070xB) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC) - /* HSI used as PLL clock source : SystemCoreClock = HSI/PREDIV * PLLMUL */ - SystemCoreClock = (HSI_VALUE/predivfactor) * pllmull; -#else - /* HSI used as PLL clock source : SystemCoreClock = HSI/2 * PLLMUL */ - SystemCoreClock = (HSI_VALUE >> 1) * pllmull; -#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 || - STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || - STM32F091xC || STM32F098xx || STM32F030xC */ - } - break; - default: /* HSI used as system clock */ - SystemCoreClock = HSI_VALUE; - break; - } - /* Compute HCLK clock frequency ----------------*/ - /* Get HCLK prescaler */ - tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; - /* HCLK clock frequency */ - SystemCoreClock >>= tmp; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/fw/cdc-dials/Src/usbd_cdc_interface.c b/fw/cdc-dials/Src/usbd_cdc_interface.c deleted file mode 100644 index 4413904..0000000 --- a/fw/cdc-dials/Src/usbd_cdc_interface.c +++ /dev/null @@ -1,46 +0,0 @@ -#include "main.h" - -USBD_CDC_LineCodingTypeDef LineCoding = - { - 115200, /* baud rate*/ - 0x00, /* stop bits-1*/ - 0x00, /* parity - none*/ - 0x08 /* nb. of bits 8*/ - }; - -extern USBD_HandleTypeDef USBD_Device; - -static int8_t CDC_Itf_Init (void); -static int8_t CDC_Itf_DeInit (void); -static int8_t CDC_Itf_Control (uint8_t cmd, uint8_t* pbuf, uint16_t length); -static int8_t CDC_Itf_Receive (uint8_t* pbuf, uint32_t *Len); - -static void ComPort_Config(void); - -USBD_CDC_ItfTypeDef USBD_CDC_fops = -{ - CDC_Itf_Init, - CDC_Itf_DeInit, - CDC_Itf_Control, - CDC_Itf_Receive -}; - -static int8_t CDC_Itf_Init(void) -{ - USBD_CDC_SetTxBuffer(&USBD_Device, UserTxBuffer, 0); - USBD_CDC_SetRxBuffer(&USBD_Device, UserRxBuffer); - - return (USBD_OK); -} - -static int8_t CDC_Itf_DeInit (void){ - -} - -static int8_t CDC_Itf_Control (uint8_t cmd, uint8_t* pbuf, uint16_t length){ - -} - -static int8_t CDC_Itf_Receive (uint8_t* pbuf, uint32_t *Len){ - -} diff --git a/fw/cdc-dials/Src/usbd_conf.c b/fw/cdc-dials/Src/usbd_conf.c deleted file mode 100644 index b3fb125..0000000 --- a/fw/cdc-dials/Src/usbd_conf.c +++ /dev/null @@ -1,464 +0,0 @@ -/** - ****************************************************************************** - * @file USB_Device/CDC_Standalone/Src/usbd_conf.c - * @author MCD Application Team - * @brief This file implements the USB Device library callbacks and MSP - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics International N.V. - * All rights reserved.

- * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted, provided that the following conditions are met: - * - * 1. Redistribution of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of other - * contributors to this software may be used to endorse or promote products - * derived from this software without specific written permission. - * 4. This software, including modifications and/or derivative works of this - * software, must execute solely and exclusively on microcontroller or - * microprocessor devices manufactured by or for STMicroelectronics. - * 5. Redistribution and use of this software other than as permitted under - * this license is void and will automatically terminate your rights under - * this license. - * - * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A - * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY - * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT - * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, - * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f0xx_hal.h" -#include "usbd_core.h" -#include "main.h" -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -PCD_HandleTypeDef hpcd; -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* - PCD BSP Routines -*******************************************************************************/ - -/** - * @brief Initializes the PCD MSP. - * @param hpcd: PCD handle - * @retval None - */ -void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd) -{ - GPIO_InitTypeDef GPIO_InitStruct; - - /* Enable the GPIOA clock */ - __HAL_RCC_GPIOA_CLK_ENABLE(); - - /* Configure USB DM and DP pins. - This is optional, and maintained only for user guidance. */ - GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF2_USB; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* Enable USB FS Clock */ - __HAL_RCC_USB_CLK_ENABLE(); - - /* Set USB FS Interrupt priority */ - HAL_NVIC_SetPriority(USB_IRQn, 3, 0); - - /* Enable USB FS Interrupt */ - HAL_NVIC_EnableIRQ(USB_IRQn); -} - -/** - * @brief De-Initializes the PCD MSP. - * @param hpcd: PCD handle - * @retval None - */ -void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd) -{ - /* Disable USB FS Clock */ - __HAL_RCC_USB_CLK_DISABLE(); -} - -/******************************************************************************* - LL Driver Callbacks (PCD -> USB Device Library) -*******************************************************************************/ - -/** - * @brief SOF callback. - * @param hpcd: PCD handle - * @retval None - */ -void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd) -{ - USBD_LL_SetupStage((USBD_HandleTypeDef*)hpcd->pData, (uint8_t *)hpcd->Setup); -} - -/** - * @brief SOF callback. - * @param hpcd: PCD handle - * @param epnum: Endpoint Number - * @retval None - */ -void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) -{ - USBD_LL_DataOutStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->OUT_ep[epnum].xfer_buff); -} - -/** - * @brief SOF callback. - * @param hpcd: PCD handle - * @param epnum: Endpoint Number - * @retval None - */ -void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) -{ - USBD_LL_DataInStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->IN_ep[epnum].xfer_buff); -} - -/** - * @brief SOF callback. - * @param hpcd: PCD handle - * @retval None - */ -void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd) -{ - USBD_LL_SOF((USBD_HandleTypeDef*)hpcd->pData); -} - -/** - * @brief SOF callback. - * @param hpcd: PCD handle - * @retval None - */ -void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd) -{ - USBD_LL_SetSpeed((USBD_HandleTypeDef*)hpcd->pData, USBD_SPEED_FULL); - /* Reset Device */ - USBD_LL_Reset((USBD_HandleTypeDef*)hpcd->pData); -} - -/** - * @brief SOF callback. - * @param hpcd: PCD handle - * @retval None - */ -void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd) -{ -} - -/** - * @brief SOF callback. - * @param hpcd: PCD handle - * @retval None - */ -void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd) -{ -} - -/** - * @brief SOF callback. - * @param hpcd: PCD handle - * @param epnum: Endpoint Number - * @retval None - */ -void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) -{ - USBD_LL_IsoOUTIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum); -} - -/** - * @brief SOF callback. - * @param hpcd: PCD handle - * @param epnum: Endpoint Number - * @retval None - */ -void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) -{ - USBD_LL_IsoINIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum); -} - -/** - * @brief SOF callback. - * @param hpcd: PCD handle - * @retval None - */ -void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd) -{ - USBD_LL_DevConnected((USBD_HandleTypeDef*)hpcd->pData); -} - -/** - * @brief SOF callback. - * @param hpcd: PCD handle - * @retval None - */ -void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd) -{ - USBD_LL_DevDisconnected((USBD_HandleTypeDef*)hpcd->pData); -} - -/******************************************************************************* - LL Driver Interface (USB Device Library --> PCD) -*******************************************************************************/ - -/** - * @brief Initializes the Low Level portion of the Device driver. - * @param pdev: Device handle - * @retval USBD Status - */ -USBD_StatusTypeDef USBD_LL_Init(USBD_HandleTypeDef *pdev) -{ - /* Set LL Driver parameters */ - hpcd.Instance = USB; - hpcd.Init.dev_endpoints = 8; - hpcd.Init.ep0_mps = 0x40; - hpcd.Init.phy_itface = PCD_PHY_EMBEDDED; - hpcd.Init.speed = PCD_SPEED_FULL; - /* Link The driver to the stack */ - hpcd.pData = pdev; - pdev->pData = &hpcd; - /* Initialize LL Driver */ - HAL_PCD_Init(&hpcd); - - HAL_PCDEx_PMAConfig(&hpcd , 0x00 , PCD_SNG_BUF, 0x40); - HAL_PCDEx_PMAConfig(&hpcd , 0x80 , PCD_SNG_BUF, 0x80); - HAL_PCDEx_PMAConfig(&hpcd , CDC_IN_EP , PCD_SNG_BUF, 0xC0); - HAL_PCDEx_PMAConfig(&hpcd , CDC_OUT_EP , PCD_SNG_BUF, 0x110); - HAL_PCDEx_PMAConfig(&hpcd , CDC_CMD_EP , PCD_SNG_BUF, 0x100); - - return USBD_OK; -} - -/** - * @brief De-Initializes the Low Level portion of the Device driver. - * @param pdev: Device handle - * @retval USBD Status - */ -USBD_StatusTypeDef USBD_LL_DeInit(USBD_HandleTypeDef *pdev) -{ - HAL_PCD_DeInit((PCD_HandleTypeDef*)pdev->pData); - return USBD_OK; -} - -/** - * @brief Starts the Low Level portion of the Device driver. - * @param pdev: Device handle - * @retval USBD Status - */ -USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev) -{ - HAL_PCD_Start((PCD_HandleTypeDef*)pdev->pData); - return USBD_OK; -} - -/** - * @brief Stops the Low Level portion of the Device driver. - * @param pdev: Device handle - * @retval USBD Status - */ -USBD_StatusTypeDef USBD_LL_Stop(USBD_HandleTypeDef *pdev) -{ - HAL_PCD_Stop((PCD_HandleTypeDef*)pdev->pData); - return USBD_OK; -} - -/** - * @brief Opens an endpoint of the Low Level Driver. - * @param pdev: Device handle - * @param ep_addr: Endpoint Number - * @param ep_type: Endpoint Type - * @param ep_mps: Endpoint Max Packet Size - * @retval USBD Status - */ -USBD_StatusTypeDef USBD_LL_OpenEP(USBD_HandleTypeDef *pdev, - uint8_t ep_addr, - uint8_t ep_type, - uint16_t ep_mps) -{ - HAL_PCD_EP_Open((PCD_HandleTypeDef*)pdev->pData, - ep_addr, - ep_mps, - ep_type); - - return USBD_OK; -} - -/** - * @brief Closes an endpoint of the Low Level Driver. - * @param pdev: Device handle - * @param ep_addr: Endpoint Number - * @retval USBD Status - */ -USBD_StatusTypeDef USBD_LL_CloseEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr) -{ - HAL_PCD_EP_Close((PCD_HandleTypeDef*)pdev->pData, ep_addr); - return USBD_OK; -} - -/** - * @brief Flushes an endpoint of the Low Level Driver. - * @param pdev: Device handle - * @param ep_addr: Endpoint Number - * @retval USBD Status - */ -USBD_StatusTypeDef USBD_LL_FlushEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr) -{ - HAL_PCD_EP_Flush((PCD_HandleTypeDef*)pdev->pData, ep_addr); - return USBD_OK; -} - -/** - * @brief Sets a Stall condition on an endpoint of the Low Level Driver. - * @param pdev: Device handle - * @param ep_addr: Endpoint Number - * @retval USBD Status - */ -USBD_StatusTypeDef USBD_LL_StallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr) -{ - HAL_PCD_EP_SetStall((PCD_HandleTypeDef*)pdev->pData, ep_addr); - return USBD_OK; -} - -/** - * @brief Clears a Stall condition on an endpoint of the Low Level Driver. - * @param pdev: Device handle - * @param ep_addr: Endpoint Number - * @retval USBD Status - */ -USBD_StatusTypeDef USBD_LL_ClearStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr) -{ - HAL_PCD_EP_ClrStall((PCD_HandleTypeDef*)pdev->pData, ep_addr); - return USBD_OK; -} - -/** - * @brief Returns Stall condition. - * @param pdev: Device handle - * @param ep_addr: Endpoint Number - * @retval Stall (1: Yes, 0: No) - */ -uint8_t USBD_LL_IsStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr) -{ - PCD_HandleTypeDef *hpcd = (PCD_HandleTypeDef*)pdev->pData; - - if((ep_addr & 0x80) == 0x80) - { - return hpcd->IN_ep[ep_addr & 0x7F].is_stall; - } - else - { - return hpcd->OUT_ep[ep_addr & 0x7F].is_stall; - } -} - -/** - * @brief Assigns a USB address to the device. - * @param pdev: Device handle - * @param ep_addr: Endpoint Number - * @retval USBD Status - */ -USBD_StatusTypeDef USBD_LL_SetUSBAddress(USBD_HandleTypeDef *pdev, uint8_t dev_addr) -{ - HAL_PCD_SetAddress((PCD_HandleTypeDef*)pdev->pData, dev_addr); - return USBD_OK; -} - -/** - * @brief Transmits data over an endpoint. - * @param pdev: Device handle - * @param ep_addr: Endpoint Number - * @param pbuf: Pointer to data to be sent - * @param size: Data size - * @retval USBD Status - */ -USBD_StatusTypeDef USBD_LL_Transmit(USBD_HandleTypeDef *pdev, - uint8_t ep_addr, - uint8_t *pbuf, - uint16_t size) -{ - HAL_PCD_EP_Transmit((PCD_HandleTypeDef*)pdev->pData, ep_addr, pbuf, size); - return USBD_OK; -} - -/** - * @brief Prepares an endpoint for reception. - * @param pdev: Device handle - * @param ep_addr: Endpoint Number - * @param pbuf: Pointer to data to be received - * @param size: Data size - * @retval USBD Status - */ -USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev, - uint8_t ep_addr, - uint8_t *pbuf, - uint16_t size) -{ - HAL_PCD_EP_Receive((PCD_HandleTypeDef*)pdev->pData, ep_addr, pbuf, size); - return USBD_OK; -} - -/** - * @brief Returns the last transfered packet size. - * @param pdev: Device handle - * @param ep_addr: Endpoint Number - * @retval Recived Data Size - */ -uint32_t USBD_LL_GetRxDataSize(USBD_HandleTypeDef *pdev, uint8_t ep_addr) -{ - return HAL_PCD_EP_GetRxCount((PCD_HandleTypeDef*)pdev->pData, ep_addr); -} - -/** - * @brief Delays routine for the USB Device Library. - * @param Delay: Delay in ms - * @retval None - */ -void USBD_LL_Delay(uint32_t Delay) -{ - HAL_Delay(Delay); -} - -/** - * @brief static single allocation. - * @param size: size of allocated memory - * @retval None - */ -void *USBD_static_malloc(uint32_t size) -{ - static uint32_t mem[MAX_STATIC_ALLOC_SIZE]; - return mem; -} - -/** - * @brief Dummy memory free - * @param *p pointer to allocated memory address - * @retval None - */ -void USBD_static_free(void *p) -{ - -} - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/fw/cdc-dials/Src/usbd_desc.c b/fw/cdc-dials/Src/usbd_desc.c deleted file mode 100644 index 8cd1390..0000000 --- a/fw/cdc-dials/Src/usbd_desc.c +++ /dev/null @@ -1,265 +0,0 @@ -/** - ****************************************************************************** - * @file USB_Device/CDC_Standalone/Src/usbd_desc.c - * @author MCD Application Team - * @brief This file provides the USBD descriptors and string formating method. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics International N.V. - * All rights reserved.

- * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted, provided that the following conditions are met: - * - * 1. Redistribution of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of other - * contributors to this software may be used to endorse or promote products - * derived from this software without specific written permission. - * 4. This software, including modifications and/or derivative works of this - * software, must execute solely and exclusively on microcontroller or - * microprocessor devices manufactured by or for STMicroelectronics. - * 5. Redistribution and use of this software other than as permitted under - * this license is void and will automatically terminate your rights under - * this license. - * - * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A - * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY - * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT - * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, - * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "usbd_core.h" -#include "usbd_desc.h" -#include "usbd_conf.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -#define USBD_VID 0x0483 -#define USBD_PID 0x5740 -#define USBD_LANGID_STRING 0x409 -#define USBD_MANUFACTURER_STRING "Otter-Iron" -#define USBD_PRODUCT_FS_STRING "chirp :3" -#define USBD_CONFIGURATION_FS_STRING "mau" -#define USBD_INTERFACE_FS_STRING ":o" - -/* Private macro -------------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -uint8_t *USBD_VCP_DeviceDescriptor(USBD_SpeedTypeDef speed, uint16_t *length); -uint8_t *USBD_VCP_LangIDStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length); -uint8_t *USBD_VCP_ManufacturerStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length); -uint8_t *USBD_VCP_ProductStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length); -uint8_t *USBD_VCP_SerialStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length); -uint8_t *USBD_VCP_ConfigStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length); -uint8_t *USBD_VCP_InterfaceStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length); -#ifdef USB_SUPPORT_USER_STRING_DESC -uint8_t *USBD_VCP_USRStringDesc (USBD_SpeedTypeDef speed, uint8_t idx, uint16_t *length); -#endif /* USB_SUPPORT_USER_STRING_DESC */ - -/* Private variables ---------------------------------------------------------*/ -USBD_DescriptorsTypeDef VCP_Desc = { - USBD_VCP_DeviceDescriptor, - USBD_VCP_LangIDStrDescriptor, - USBD_VCP_ManufacturerStrDescriptor, - USBD_VCP_ProductStrDescriptor, - USBD_VCP_SerialStrDescriptor, - USBD_VCP_ConfigStrDescriptor, - USBD_VCP_InterfaceStrDescriptor, -}; - -/* USB Standard Device Descriptor */ -const uint8_t hUSBDDeviceDesc[USB_LEN_DEV_DESC]= { - 0x12, /* bLength */ - USB_DESC_TYPE_DEVICE, /* bDescriptorType */ - 0x00, /* bcdUSB */ - 0x02, - 0x00, /* bDeviceClass */ - 0x00, /* bDeviceSubClass */ - 0x00, /* bDeviceProtocol */ - USB_MAX_EP0_SIZE, /* bMaxPacketSize */ - LOBYTE(USBD_VID), /* idVendor */ - HIBYTE(USBD_VID), /* idVendor */ - LOBYTE(USBD_PID), /* idVendor */ - HIBYTE(USBD_PID), /* idVendor */ - 0x00, /* bcdDevice rel. 2.00 */ - 0x02, - USBD_IDX_MFC_STR, /* Index of manufacturer string */ - USBD_IDX_PRODUCT_STR, /* Index of product string */ - USBD_IDX_SERIAL_STR, /* Index of serial number string */ - USBD_MAX_NUM_CONFIGURATION /* bNumConfigurations */ -}; /* USB_DeviceDescriptor */ - -/* USB Standard Device Descriptor */ -const uint8_t USBD_LangIDDesc[USB_LEN_LANGID_STR_DESC]= -{ - USB_LEN_LANGID_STR_DESC, - USB_DESC_TYPE_STRING, - LOBYTE(USBD_LANGID_STRING), - HIBYTE(USBD_LANGID_STRING), -}; - -uint8_t USBD_StringSerial[USB_SIZ_STRING_SERIAL] = -{ - USB_SIZ_STRING_SERIAL, - USB_DESC_TYPE_STRING, -}; - -uint8_t USBD_StrDesc[USBD_MAX_STR_DESC_SIZ]; - -/* Private functions ---------------------------------------------------------*/ -static void IntToUnicode (uint32_t value , uint8_t *pbuf , uint8_t len); -static void Get_SerialNum(void); -/** - * @brief Returns the device descriptor. - * @param speed: Current device speed - * @param length: Pointer to data length variable - * @retval Pointer to descriptor buffer - */ -uint8_t *USBD_VCP_DeviceDescriptor(USBD_SpeedTypeDef speed, uint16_t *length) -{ - *length = sizeof(hUSBDDeviceDesc); - return (uint8_t*)hUSBDDeviceDesc; -} - -/** - * @brief Returns the LangID string descriptor. - * @param speed: Current device speed - * @param length: Pointer to data length variable - * @retval Pointer to descriptor buffer - */ -uint8_t *USBD_VCP_LangIDStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length) -{ - *length = sizeof(USBD_LangIDDesc); - return (uint8_t*)USBD_LangIDDesc; -} - -/** - * @brief Returns the product string descriptor. - * @param speed: Current device speed - * @param length: Pointer to data length variable - * @retval Pointer to descriptor buffer - */ -uint8_t *USBD_VCP_ProductStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length) -{ - USBD_GetString((uint8_t *)USBD_PRODUCT_FS_STRING, USBD_StrDesc, length); - return USBD_StrDesc; -} - -/** - * @brief Returns the manufacturer string descriptor. - * @param speed: Current device speed - * @param length: Pointer to data length variable - * @retval Pointer to descriptor buffer - */ -uint8_t *USBD_VCP_ManufacturerStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length) -{ - USBD_GetString((uint8_t *)USBD_MANUFACTURER_STRING, USBD_StrDesc, length); - return USBD_StrDesc; -} - -/** - * @brief Returns the serial number string descriptor. - * @param speed: Current device speed - * @param length: Pointer to data length variable - * @retval Pointer to descriptor buffer - */ -uint8_t *USBD_VCP_SerialStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length) -{ - *length = USB_SIZ_STRING_SERIAL; - - /* Update the serial number string descriptor with the data from the unique ID*/ - Get_SerialNum(); - - return USBD_StringSerial; -} - -/** - * @brief Returns the configuration string descriptor. - * @param speed: Current device speed - * @param length: Pointer to data length variable - * @retval Pointer to descriptor buffer - */ -uint8_t *USBD_VCP_ConfigStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length) -{ - USBD_GetString((uint8_t *)USBD_CONFIGURATION_FS_STRING, USBD_StrDesc, length); - return USBD_StrDesc; -} - -/** - * @brief Returns the interface string descriptor. - * @param speed: Current device speed - * @param length: Pointer to data length variable - * @retval Pointer to descriptor buffer - */ -uint8_t *USBD_VCP_InterfaceStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length) -{ - USBD_GetString((uint8_t *)USBD_INTERFACE_FS_STRING, USBD_StrDesc, length); - return USBD_StrDesc; -} - -/** - * @brief Create the serial number string descriptor - * @param None - * @retval None - */ -static void Get_SerialNum(void) -{ - uint32_t deviceserial0, deviceserial1, deviceserial2; - - deviceserial0 = *(uint32_t*)DEVICE_ID1; - deviceserial1 = *(uint32_t*)DEVICE_ID2; - deviceserial2 = *(uint32_t*)DEVICE_ID3; - - deviceserial0 += deviceserial2; - - if (deviceserial0 != 0) - { - IntToUnicode (deviceserial0, &USBD_StringSerial[2] ,8); - IntToUnicode (deviceserial1, &USBD_StringSerial[18] ,4); - } -} - -/** - * @brief Convert Hex 32Bits value into char - * @param value: value to convert - * @param pbuf: pointer to the buffer - * @param len: buffer length - * @retval None - */ -static void IntToUnicode (uint32_t value , uint8_t *pbuf , uint8_t len) -{ - uint8_t idx = 0; - - for( idx = 0 ; idx < len ; idx ++) - { - if( ((value >> 28)) < 0xA ) - { - pbuf[ 2* idx] = (value >> 28) + '0'; - } - else - { - pbuf[2* idx] = (value >> 28) + 'A' - 10; - } - - value = value << 4; - - pbuf[ 2* idx + 1] = 0; - } -} - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit