From 6ab94e0b318884bbcb95e2ea3835f951502e1d99 Mon Sep 17 00:00:00 2001 From: jaseg Date: Wed, 14 Oct 2020 12:47:28 +0200 Subject: Move firmware into subdirectory --- fw/cdc-dials/Src/usbd_conf.c | 464 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 464 insertions(+) create mode 100644 fw/cdc-dials/Src/usbd_conf.c (limited to 'fw/cdc-dials/Src/usbd_conf.c') diff --git a/fw/cdc-dials/Src/usbd_conf.c b/fw/cdc-dials/Src/usbd_conf.c new file mode 100644 index 0000000..b3fb125 --- /dev/null +++ b/fw/cdc-dials/Src/usbd_conf.c @@ -0,0 +1,464 @@ +/** + ****************************************************************************** + * @file USB_Device/CDC_Standalone/Src/usbd_conf.c + * @author MCD Application Team + * @brief This file implements the USB Device library callbacks and MSP + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics International N.V. + * All rights reserved.

+ * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted, provided that the following conditions are met: + * + * 1. Redistribution of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of other + * contributors to this software may be used to endorse or promote products + * derived from this software without specific written permission. + * 4. This software, including modifications and/or derivative works of this + * software, must execute solely and exclusively on microcontroller or + * microprocessor devices manufactured by or for STMicroelectronics. + * 5. Redistribution and use of this software other than as permitted under + * this license is void and will automatically terminate your rights under + * this license. + * + * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY + * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT + * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" +#include "usbd_core.h" +#include "main.h" +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +PCD_HandleTypeDef hpcd; +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/******************************************************************************* + PCD BSP Routines +*******************************************************************************/ + +/** + * @brief Initializes the PCD MSP. + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd) +{ + GPIO_InitTypeDef GPIO_InitStruct; + + /* Enable the GPIOA clock */ + __HAL_RCC_GPIOA_CLK_ENABLE(); + + /* Configure USB DM and DP pins. + This is optional, and maintained only for user guidance. */ + GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF2_USB; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* Enable USB FS Clock */ + __HAL_RCC_USB_CLK_ENABLE(); + + /* Set USB FS Interrupt priority */ + HAL_NVIC_SetPriority(USB_IRQn, 3, 0); + + /* Enable USB FS Interrupt */ + HAL_NVIC_EnableIRQ(USB_IRQn); +} + +/** + * @brief De-Initializes the PCD MSP. + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd) +{ + /* Disable USB FS Clock */ + __HAL_RCC_USB_CLK_DISABLE(); +} + +/******************************************************************************* + LL Driver Callbacks (PCD -> USB Device Library) +*******************************************************************************/ + +/** + * @brief SOF callback. + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd) +{ + USBD_LL_SetupStage((USBD_HandleTypeDef*)hpcd->pData, (uint8_t *)hpcd->Setup); +} + +/** + * @brief SOF callback. + * @param hpcd: PCD handle + * @param epnum: Endpoint Number + * @retval None + */ +void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + USBD_LL_DataOutStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->OUT_ep[epnum].xfer_buff); +} + +/** + * @brief SOF callback. + * @param hpcd: PCD handle + * @param epnum: Endpoint Number + * @retval None + */ +void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + USBD_LL_DataInStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->IN_ep[epnum].xfer_buff); +} + +/** + * @brief SOF callback. + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd) +{ + USBD_LL_SOF((USBD_HandleTypeDef*)hpcd->pData); +} + +/** + * @brief SOF callback. + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd) +{ + USBD_LL_SetSpeed((USBD_HandleTypeDef*)hpcd->pData, USBD_SPEED_FULL); + /* Reset Device */ + USBD_LL_Reset((USBD_HandleTypeDef*)hpcd->pData); +} + +/** + * @brief SOF callback. + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd) +{ +} + +/** + * @brief SOF callback. + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd) +{ +} + +/** + * @brief SOF callback. + * @param hpcd: PCD handle + * @param epnum: Endpoint Number + * @retval None + */ +void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + USBD_LL_IsoOUTIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum); +} + +/** + * @brief SOF callback. + * @param hpcd: PCD handle + * @param epnum: Endpoint Number + * @retval None + */ +void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + USBD_LL_IsoINIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum); +} + +/** + * @brief SOF callback. + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd) +{ + USBD_LL_DevConnected((USBD_HandleTypeDef*)hpcd->pData); +} + +/** + * @brief SOF callback. + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd) +{ + USBD_LL_DevDisconnected((USBD_HandleTypeDef*)hpcd->pData); +} + +/******************************************************************************* + LL Driver Interface (USB Device Library --> PCD) +*******************************************************************************/ + +/** + * @brief Initializes the Low Level portion of the Device driver. + * @param pdev: Device handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_Init(USBD_HandleTypeDef *pdev) +{ + /* Set LL Driver parameters */ + hpcd.Instance = USB; + hpcd.Init.dev_endpoints = 8; + hpcd.Init.ep0_mps = 0x40; + hpcd.Init.phy_itface = PCD_PHY_EMBEDDED; + hpcd.Init.speed = PCD_SPEED_FULL; + /* Link The driver to the stack */ + hpcd.pData = pdev; + pdev->pData = &hpcd; + /* Initialize LL Driver */ + HAL_PCD_Init(&hpcd); + + HAL_PCDEx_PMAConfig(&hpcd , 0x00 , PCD_SNG_BUF, 0x40); + HAL_PCDEx_PMAConfig(&hpcd , 0x80 , PCD_SNG_BUF, 0x80); + HAL_PCDEx_PMAConfig(&hpcd , CDC_IN_EP , PCD_SNG_BUF, 0xC0); + HAL_PCDEx_PMAConfig(&hpcd , CDC_OUT_EP , PCD_SNG_BUF, 0x110); + HAL_PCDEx_PMAConfig(&hpcd , CDC_CMD_EP , PCD_SNG_BUF, 0x100); + + return USBD_OK; +} + +/** + * @brief De-Initializes the Low Level portion of the Device driver. + * @param pdev: Device handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_DeInit(USBD_HandleTypeDef *pdev) +{ + HAL_PCD_DeInit((PCD_HandleTypeDef*)pdev->pData); + return USBD_OK; +} + +/** + * @brief Starts the Low Level portion of the Device driver. + * @param pdev: Device handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev) +{ + HAL_PCD_Start((PCD_HandleTypeDef*)pdev->pData); + return USBD_OK; +} + +/** + * @brief Stops the Low Level portion of the Device driver. + * @param pdev: Device handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_Stop(USBD_HandleTypeDef *pdev) +{ + HAL_PCD_Stop((PCD_HandleTypeDef*)pdev->pData); + return USBD_OK; +} + +/** + * @brief Opens an endpoint of the Low Level Driver. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @param ep_type: Endpoint Type + * @param ep_mps: Endpoint Max Packet Size + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_OpenEP(USBD_HandleTypeDef *pdev, + uint8_t ep_addr, + uint8_t ep_type, + uint16_t ep_mps) +{ + HAL_PCD_EP_Open((PCD_HandleTypeDef*)pdev->pData, + ep_addr, + ep_mps, + ep_type); + + return USBD_OK; +} + +/** + * @brief Closes an endpoint of the Low Level Driver. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_CloseEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + HAL_PCD_EP_Close((PCD_HandleTypeDef*)pdev->pData, ep_addr); + return USBD_OK; +} + +/** + * @brief Flushes an endpoint of the Low Level Driver. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_FlushEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + HAL_PCD_EP_Flush((PCD_HandleTypeDef*)pdev->pData, ep_addr); + return USBD_OK; +} + +/** + * @brief Sets a Stall condition on an endpoint of the Low Level Driver. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_StallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + HAL_PCD_EP_SetStall((PCD_HandleTypeDef*)pdev->pData, ep_addr); + return USBD_OK; +} + +/** + * @brief Clears a Stall condition on an endpoint of the Low Level Driver. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_ClearStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + HAL_PCD_EP_ClrStall((PCD_HandleTypeDef*)pdev->pData, ep_addr); + return USBD_OK; +} + +/** + * @brief Returns Stall condition. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @retval Stall (1: Yes, 0: No) + */ +uint8_t USBD_LL_IsStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + PCD_HandleTypeDef *hpcd = (PCD_HandleTypeDef*)pdev->pData; + + if((ep_addr & 0x80) == 0x80) + { + return hpcd->IN_ep[ep_addr & 0x7F].is_stall; + } + else + { + return hpcd->OUT_ep[ep_addr & 0x7F].is_stall; + } +} + +/** + * @brief Assigns a USB address to the device. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_SetUSBAddress(USBD_HandleTypeDef *pdev, uint8_t dev_addr) +{ + HAL_PCD_SetAddress((PCD_HandleTypeDef*)pdev->pData, dev_addr); + return USBD_OK; +} + +/** + * @brief Transmits data over an endpoint. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @param pbuf: Pointer to data to be sent + * @param size: Data size + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_Transmit(USBD_HandleTypeDef *pdev, + uint8_t ep_addr, + uint8_t *pbuf, + uint16_t size) +{ + HAL_PCD_EP_Transmit((PCD_HandleTypeDef*)pdev->pData, ep_addr, pbuf, size); + return USBD_OK; +} + +/** + * @brief Prepares an endpoint for reception. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @param pbuf: Pointer to data to be received + * @param size: Data size + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev, + uint8_t ep_addr, + uint8_t *pbuf, + uint16_t size) +{ + HAL_PCD_EP_Receive((PCD_HandleTypeDef*)pdev->pData, ep_addr, pbuf, size); + return USBD_OK; +} + +/** + * @brief Returns the last transfered packet size. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @retval Recived Data Size + */ +uint32_t USBD_LL_GetRxDataSize(USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + return HAL_PCD_EP_GetRxCount((PCD_HandleTypeDef*)pdev->pData, ep_addr); +} + +/** + * @brief Delays routine for the USB Device Library. + * @param Delay: Delay in ms + * @retval None + */ +void USBD_LL_Delay(uint32_t Delay) +{ + HAL_Delay(Delay); +} + +/** + * @brief static single allocation. + * @param size: size of allocated memory + * @retval None + */ +void *USBD_static_malloc(uint32_t size) +{ + static uint32_t mem[MAX_STATIC_ALLOC_SIZE]; + return mem; +} + +/** + * @brief Dummy memory free + * @param *p pointer to allocated memory address + * @retval None + */ +void USBD_static_free(void *p) +{ + +} + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit