From 6ab94e0b318884bbcb95e2ea3835f951502e1d99 Mon Sep 17 00:00:00 2001 From: jaseg Date: Wed, 14 Oct 2020 12:47:28 +0200 Subject: Move firmware into subdirectory --- .../STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_usart.c | 3249 ++++++++++++++++++++ 1 file changed, 3249 insertions(+) create mode 100644 fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_usart.c (limited to 'fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_usart.c') diff --git a/fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_usart.c b/fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_usart.c new file mode 100644 index 0000000..d480193 --- /dev/null +++ b/fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_usart.c @@ -0,0 +1,3249 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_usart.c + * @author MCD Application Team + * @brief USART HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Universal Synchronous/Asynchronous Receiver Transmitter + * Peripheral (USART). + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State and Error functions + * + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + The USART HAL driver can be used as follows: + + (#) Declare a USART_HandleTypeDef handle structure (eg. USART_HandleTypeDef husart). + (#) Initialize the USART low level resources by implementing the HAL_USART_MspInit() API: + (++) Enable the USARTx interface clock. + (++) USART pins configuration: + (+++) Enable the clock for the USART GPIOs. + (+++) Configure these USART pins as alternate function pull-up. + (++) NVIC configuration if you need to use interrupt process (HAL_USART_Transmit_IT(), + HAL_USART_Receive_IT() and HAL_USART_TransmitReceive_IT() APIs): + (+++) Configure the USARTx interrupt priority. + (+++) Enable the NVIC USART IRQ handle. + (++) USART interrupts handling: + -@@- The specific USART interrupts (Transmission complete interrupt, + RXNE interrupt and Error Interrupts) will be managed using the macros + __HAL_USART_ENABLE_IT() and __HAL_USART_DISABLE_IT() inside the transmit and receive process. + (++) DMA Configuration if you need to use DMA process (HAL_USART_Transmit_DMA() + HAL_USART_Receive_DMA() and HAL_USART_TransmitReceive_DMA() APIs): + (+++) Declare a DMA handle structure for the Tx/Rx channel. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx channel. + (+++) Associate the initialized DMA handle to the USART DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx channel. + + (#) Program the Baud Rate, Word Length, Stop Bit, Parity, and Mode + (Receiver/Transmitter) in the husart handle Init structure. + + (#) Initialize the USART registers by calling the HAL_USART_Init() API: + (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) + by calling the customized HAL_USART_MspInit(&husart) API. + + [..] + (@) To configure and enable/disable the USART to wake up the MCU from stop mode, resort to UART API's + HAL_UARTEx_StopModeWakeUpSourceConfig(), HAL_UARTEx_EnableStopMode() and + HAL_UARTEx_DisableStopMode() in casting the USART handle to UART type UART_HandleTypeDef. + + ##### Callback registration ##### + ================================== + + [..] + The compilation define USE_HAL_USART_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function @ref HAL_USART_RegisterCallback() to register a user callback. + Function @ref HAL_USART_RegisterCallback() allows to register following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) TxRxCpltCallback : Tx Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) MspInitCallback : USART MspInit. + (+) MspDeInitCallback : USART MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + Use function @ref HAL_USART_UnRegisterCallback() to reset a callback to the default + weak (surcharged) function. + @ref HAL_USART_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) TxRxCpltCallback : Tx Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) MspInitCallback : USART MspInit. + (+) MspDeInitCallback : USART MspDeInit. + + [..] + By default, after the @ref HAL_USART_Init() and when the state is HAL_USART_STATE_RESET + all callbacks are set to the corresponding weak (surcharged) functions: + examples @ref HAL_USART_TxCpltCallback(), @ref HAL_USART_RxHalfCpltCallback(). + Exception done for MspInit and MspDeInit functions that are respectively + reset to the legacy weak (surcharged) functions in the @ref HAL_USART_Init() + and @ref HAL_USART_DeInit() only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the @ref HAL_USART_Init() and @ref HAL_USART_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + [..] + Callbacks can be registered/unregistered in HAL_USART_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_USART_STATE_READY or HAL_USART_STATE_RESET state, thus registered (user) + MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using @ref HAL_USART_RegisterCallback() before calling @ref HAL_USART_DeInit() + or @ref HAL_USART_Init() function. + + [..] + When The compilation define USE_HAL_USART_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available + and weak (surcharged) callbacks are used. + + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @defgroup USART USART + * @brief HAL USART Synchronous module driver + * @{ + */ + +#ifdef HAL_USART_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup USART_Private_Constants USART Private Constants + * @{ + */ +#define USART_DUMMY_DATA ((uint16_t) 0xFFFF) /*!< USART transmitted dummy data */ +#define USART_TEACK_REACK_TIMEOUT 1000U /*!< USART TX or RX enable acknowledge time-out value */ +#define USART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | \ + USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8)) /*!< USART CR1 fields of parameters set by USART_SetConfig API */ +#define USART_CR2_FIELDS ((uint32_t)(USART_CR2_CPHA | USART_CR2_CPOL | \ + USART_CR2_CLKEN | USART_CR2_LBCL | USART_CR2_STOP)) /*!< USART CR2 fields of parameters set by USART_SetConfig API */ + +#define USART_BRR_MIN 0x10U /* USART BRR minimum authorized value */ +#define USART_BRR_MAX 0xFFFFU /* USART BRR maximum authorized value */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup USART_Private_Functions + * @{ + */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) +void USART_InitCallbacksToDefault(USART_HandleTypeDef *husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ +static void USART_EndTransfer(USART_HandleTypeDef *husart); +static void USART_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void USART_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void USART_DMATxHalfCplt(DMA_HandleTypeDef *hdma); +static void USART_DMARxHalfCplt(DMA_HandleTypeDef *hdma); +static void USART_DMAError(DMA_HandleTypeDef *hdma); +static void USART_DMAAbortOnError(DMA_HandleTypeDef *hdma); +static void USART_DMATxAbortCallback(DMA_HandleTypeDef *hdma); +static void USART_DMARxAbortCallback(DMA_HandleTypeDef *hdma); +static HAL_StatusTypeDef USART_WaitOnFlagUntilTimeout(USART_HandleTypeDef *husart, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout); +static HAL_StatusTypeDef USART_SetConfig(USART_HandleTypeDef *husart); +static HAL_StatusTypeDef USART_CheckIdleState(USART_HandleTypeDef *husart); +static void USART_TxISR_8BIT(USART_HandleTypeDef *husart); +static void USART_TxISR_16BIT(USART_HandleTypeDef *husart); +static void USART_EndTransmit_IT(USART_HandleTypeDef *husart); +static void USART_RxISR_8BIT(USART_HandleTypeDef *husart); +static void USART_RxISR_16BIT(USART_HandleTypeDef *husart); + + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup USART_Exported_Functions USART Exported Functions + * @{ + */ + +/** @defgroup USART_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USART + in asynchronous and in synchronous modes. + (+) For the asynchronous mode only these parameters can be configured: + (++) Baud Rate + (++) Word Length + (++) Stop Bit + (++) Parity: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + (++) USART polarity + (++) USART phase + (++) USART LastBit + (++) Receiver/transmitter modes + + [..] + The HAL_USART_Init() function follows the USART synchronous configuration + procedure (details for the procedure are available in reference manual). + +@endverbatim + + Depending on the frame length either defined by the M1 and M0 bits (7-bit, + 8-bit or 9-bit) or by the M bit (8-bits or 9-bits), the possible USART formats + are listed in the following table. + + Table 1. USART frame format. + +-----------------------------------------------------------------------+ + | M bit | PCE bit | USART frame | + |-------------------|-----------|---------------------------------------| + | 0 | 0 | | SB | 8-bit data | STB | | + |-------------------|-----------|---------------------------------------| + | 0 | 1 | | SB | 7-bit data | PB | STB | | + |-------------------|-----------|---------------------------------------| + | 1 | 0 | | SB | 9-bit data | STB | | + |-------------------|-----------|---------------------------------------| + | 1 | 1 | | SB | 8-bit data | PB | STB | | + +-----------------------------------------------------------------------+ + +-----------------------------------------------------------------------+ + | M1 bit | M0 bit | PCE bit | USART frame | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 0 | | SB | 8 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 0 | | SB | 9 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 0 | | SB | 7 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | | + +-----------------------------------------------------------------------+ + + * @{ + */ + +/** + * @brief Initialize the USART mode according to the specified + * parameters in the USART_InitTypeDef and initialize the associated handle. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart) +{ + /* Check the USART handle allocation */ + if (husart == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_USART_INSTANCE(husart->Instance)); + + if (husart->State == HAL_USART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + husart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + USART_InitCallbacksToDefault(husart); + + if (husart->MspInitCallback == NULL) + { + husart->MspInitCallback = HAL_USART_MspInit; + } + + /* Init the low level hardware */ + husart->MspInitCallback(husart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_USART_MspInit(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + + husart->State = HAL_USART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_USART_DISABLE(husart); + + /* Set the Usart Communication parameters */ + if (USART_SetConfig(husart) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* In Synchronous mode, the following bits must be kept cleared: + - LINEN bit (if LIN is supported) in the USART_CR2 register + - SCEN (if Smartcard is supported), HDSEL and IREN (if IrDA is supported) bits in the USART_CR3 register. + */ +#if defined (USART_CR2_LINEN) + husart->Instance->CR2 &= ~USART_CR2_LINEN; +#endif /* USART_CR2_LINEN */ +#if defined (USART_CR3_SCEN) +#if defined (USART_CR3_IREN) + husart->Instance->CR3 &= ~(USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN); +#else + husart->Instance->CR3 &= ~(USART_CR3_SCEN | USART_CR3_HDSEL); +#endif /* USART_CR3_IREN */ +#else +#if defined (USART_CR3_IREN) + husart->Instance->CR3 &= ~(USART_CR3_HDSEL | USART_CR3_IREN); +#else + husart->Instance->CR3 &= ~(USART_CR3_HDSEL); +#endif /* USART_CR3_IREN */ +#endif /* USART_CR3_SCEN */ + + /* Enable the Peripheral */ + __HAL_USART_ENABLE(husart); + + /* TEACK and/or REACK to check before moving husart->State to Ready */ + return (USART_CheckIdleState(husart)); +} + +/** + * @brief DeInitialize the USART peripheral. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart) +{ + /* Check the USART handle allocation */ + if (husart == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_USART_INSTANCE(husart->Instance)); + + husart->State = HAL_USART_STATE_BUSY; + + husart->Instance->CR1 = 0x0U; + husart->Instance->CR2 = 0x0U; + husart->Instance->CR3 = 0x0U; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + if (husart->MspDeInitCallback == NULL) + { + husart->MspDeInitCallback = HAL_USART_MspDeInit; + } + /* DeInit the low level hardware */ + husart->MspDeInitCallback(husart); +#else + /* DeInit the low level hardware */ + HAL_USART_MspDeInit(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_RESET; + + /* Process Unlock */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Initialize the USART MSP. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_MspInit(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USART_MspInit can be implemented in the user file + */ +} + +/** + * @brief DeInitialize the USART MSP. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_MspDeInit(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USART_MspDeInit can be implemented in the user file + */ +} + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User USART Callback + * To be used instead of the weak predefined callback + * @param husart usart handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_USART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_USART_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_USART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_USART_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_USART_TX_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_USART_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_USART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_USART_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_USART_MSPDEINIT_CB_ID MspDeInit Callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status ++ */ +HAL_StatusTypeDef HAL_USART_RegisterCallback(USART_HandleTypeDef *husart, HAL_USART_CallbackIDTypeDef CallbackID, + pUSART_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(husart); + + if (husart->State == HAL_USART_STATE_READY) + { + switch (CallbackID) + { + case HAL_USART_TX_HALFCOMPLETE_CB_ID : + husart->TxHalfCpltCallback = pCallback; + break; + + case HAL_USART_TX_COMPLETE_CB_ID : + husart->TxCpltCallback = pCallback; + break; + + case HAL_USART_RX_HALFCOMPLETE_CB_ID : + husart->RxHalfCpltCallback = pCallback; + break; + + case HAL_USART_RX_COMPLETE_CB_ID : + husart->RxCpltCallback = pCallback; + break; + + case HAL_USART_TX_RX_COMPLETE_CB_ID : + husart->TxRxCpltCallback = pCallback; + break; + + case HAL_USART_ERROR_CB_ID : + husart->ErrorCallback = pCallback; + break; + + case HAL_USART_ABORT_COMPLETE_CB_ID : + husart->AbortCpltCallback = pCallback; + break; + + + case HAL_USART_MSPINIT_CB_ID : + husart->MspInitCallback = pCallback; + break; + + case HAL_USART_MSPDEINIT_CB_ID : + husart->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (husart->State == HAL_USART_STATE_RESET) + { + switch (CallbackID) + { + case HAL_USART_MSPINIT_CB_ID : + husart->MspInitCallback = pCallback; + break; + + case HAL_USART_MSPDEINIT_CB_ID : + husart->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(husart); + + return status; +} + +/** + * @brief Unregister an UART Callback + * UART callaback is redirected to the weak predefined callback + * @param husart uart handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_USART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_USART_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_USART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_USART_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_USART_TX_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_USART_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_USART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_USART_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_USART_MSPDEINIT_CB_ID MspDeInit Callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_UnRegisterCallback(USART_HandleTypeDef *husart, HAL_USART_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(husart); + + if (HAL_USART_STATE_READY == husart->State) + { + switch (CallbackID) + { + case HAL_USART_TX_HALFCOMPLETE_CB_ID : + husart->TxHalfCpltCallback = HAL_USART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + break; + + case HAL_USART_TX_COMPLETE_CB_ID : + husart->TxCpltCallback = HAL_USART_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_USART_RX_HALFCOMPLETE_CB_ID : + husart->RxHalfCpltCallback = HAL_USART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + break; + + case HAL_USART_RX_COMPLETE_CB_ID : + husart->RxCpltCallback = HAL_USART_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_USART_TX_RX_COMPLETE_CB_ID : + husart->TxRxCpltCallback = HAL_USART_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */ + break; + + case HAL_USART_ERROR_CB_ID : + husart->ErrorCallback = HAL_USART_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_USART_ABORT_COMPLETE_CB_ID : + husart->AbortCpltCallback = HAL_USART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + + case HAL_USART_MSPINIT_CB_ID : + husart->MspInitCallback = HAL_USART_MspInit; /* Legacy weak MspInitCallback */ + break; + + case HAL_USART_MSPDEINIT_CB_ID : + husart->MspDeInitCallback = HAL_USART_MspDeInit; /* Legacy weak MspDeInitCallback */ + break; + + default : + /* Update the error code */ + husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_USART_STATE_RESET == husart->State) + { + switch (CallbackID) + { + case HAL_USART_MSPINIT_CB_ID : + husart->MspInitCallback = HAL_USART_MspInit; + break; + + case HAL_USART_MSPDEINIT_CB_ID : + husart->MspDeInitCallback = HAL_USART_MspDeInit; + break; + + default : + /* Update the error code */ + husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(husart); + + return status; +} +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + + +/** + * @} + */ + +/** @defgroup USART_Exported_Functions_Group2 IO operation functions + * @brief USART Transmit and Receive functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to manage the USART synchronous + data transfers. + + [..] The USART supports master mode only: it cannot receive or send data related to an input + clock (SCLK is always an output). + + [..] + + (#) There are two modes of transfer: + (++) Blocking mode: The communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode: The communication is performed using Interrupts + or DMA, These API's return the HAL status. + The end of the data processing will be indicated through the + dedicated USART IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + The HAL_USART_TxCpltCallback(), HAL_USART_RxCpltCallback() and HAL_USART_TxRxCpltCallback() user callbacks + will be executed respectively at the end of the transmit or Receive process + The HAL_USART_ErrorCallback()user callback will be executed when a communication error is detected + + (#) Blocking mode API's are : + (++) HAL_USART_Transmit() in simplex mode + (++) HAL_USART_Receive() in full duplex receive only + (++) HAL_USART_TransmitReceive() in full duplex mode + + (#) Non-Blocking mode API's with Interrupt are : + (++) HAL_USART_Transmit_IT() in simplex mode + (++) HAL_USART_Receive_IT() in full duplex receive only + (++) HAL_USART_TransmitReceive_IT() in full duplex mode + (++) HAL_USART_IRQHandler() + + (#) No-Blocking mode API's with DMA are : + (++) HAL_USART_Transmit_DMA() in simplex mode + (++) HAL_USART_Receive_DMA() in full duplex receive only + (++) HAL_USART_TransmitReceive_DMA() in full duplex mode + (++) HAL_USART_DMAPause() + (++) HAL_USART_DMAResume() + (++) HAL_USART_DMAStop() + + (#) A set of Transfer Complete Callbacks are provided in Non_Blocking mode: + (++) HAL_USART_TxCpltCallback() + (++) HAL_USART_RxCpltCallback() + (++) HAL_USART_TxHalfCpltCallback() + (++) HAL_USART_RxHalfCpltCallback() + (++) HAL_USART_ErrorCallback() + (++) HAL_USART_TxRxCpltCallback() + + (#) Non-Blocking mode transfers could be aborted using Abort API's : + (++) HAL_USART_Abort() + (++) HAL_USART_Abort_IT() + + (#) For Abort services based on interrupts (HAL_USART_Abort_IT), a Abort Complete Callbacks is provided: + (++) HAL_USART_AbortCpltCallback() + + (#) In Non-Blocking mode transfers, possible errors are split into 2 categories. + Errors are handled as follows : + (++) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is + to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error in Interrupt mode reception . + Received character is then retrieved and stored in Rx buffer, Error code is set to allow user to identify error type, + and HAL_USART_ErrorCallback() user callback is executed. Transfer is kept ongoing on USART side. + If user wants to abort it, Abort services should be called by user. + (++) Error is considered as Blocking : Transfer could not be completed properly and is aborted. + This concerns Overrun Error In Interrupt mode reception and all errors in DMA mode. + Error code is set to allow user to identify error type, and HAL_USART_ErrorCallback() user callback is executed. + +@endverbatim + * @{ + */ + +/** + * @brief Simplex send an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pTxData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pTxData. + * @param husart USART handle. + * @param pTxData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout) +{ + uint8_t *ptxdata8bits; + uint16_t *ptxdata16bits; + uint32_t tickstart; + + if (husart->State == HAL_USART_STATE_READY) + { + if ((pTxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pTxData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be filled into TDR will be + handled through a u16 cast. */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + if ((((uint32_t)pTxData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_TX; + + /* Init tickstart for timeout managment*/ + tickstart = HAL_GetTick(); + + husart->TxXferSize = Size; + husart->TxXferCount = Size; + + /* In case of 9bits/No Parity transfer, pTxData needs to be handled as a uint16_t pointer */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + ptxdata8bits = NULL; + ptxdata16bits = (uint16_t *) pTxData; + } + else + { + ptxdata8bits = pTxData; + ptxdata16bits = NULL; + } + + /* Check the remaining data to be sent */ + while (husart->TxXferCount > 0U) + { + if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + if (ptxdata8bits == NULL) + { + husart->Instance->TDR = (uint16_t)(*ptxdata16bits & 0x01FFU); + ptxdata16bits++; + } + else + { + husart->Instance->TDR = (uint8_t)(*ptxdata8bits & 0xFFU); + ptxdata8bits++; + } + + husart->TxXferCount--; + } + + if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Clear Transmission Complete Flag */ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_TCF); + + /* Clear overrun flag and discard the received data */ + __HAL_USART_CLEAR_OREFLAG(husart); + __HAL_USART_SEND_REQ(husart, USART_RXDATA_FLUSH_REQUEST); +#if defined(USART_RQR_TXFRQ) + __HAL_USART_SEND_REQ(husart, USART_TXDATA_FLUSH_REQUEST); +#endif /* USART_RQR_TXFRQ */ + + /* At end of Tx process, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in blocking mode. + * @note To receive synchronous data, dummy data are simultaneously transmitted. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pRxData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits) + * (as received data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pRxData. + * @param husart USART handle. + * @param pRxData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout) +{ + uint8_t *prxdata8bits; + uint16_t *prxdata16bits; + uint16_t uhMask; + uint32_t tickstart; + + if (husart->State == HAL_USART_STATE_READY) + { + if ((pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pRxData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be received from RDR will be + handled through a u16 cast. */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + if ((((uint32_t)pRxData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_RX; + + /* Init tickstart for timeout managment*/ + tickstart = HAL_GetTick(); + + husart->RxXferSize = Size; + husart->RxXferCount = Size; + + /* Computation of USART mask to apply to RDR register */ + USART_MASK_COMPUTATION(husart); + uhMask = husart->Mask; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + prxdata8bits = NULL; + prxdata16bits = (uint16_t *) pRxData; + } + else + { + prxdata8bits = pRxData; + prxdata16bits = NULL; + } + + /* as long as data have to be received */ + while (husart->RxXferCount > 0U) + { + { + /* Wait until TXE flag is set to send dummy byte in order to generate the + * clock for the slave to send data. + * Whatever the frame length (7, 8 or 9-bit long), the same dummy value + * can be written for all the cases. */ + if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x0FF); + } + + /* Wait for RXNE Flag */ + if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + if (prxdata8bits == NULL) + { + *prxdata16bits = (uint16_t)(husart->Instance->RDR & uhMask); + prxdata16bits++; + } + else + { + *prxdata8bits = (uint8_t)(husart->Instance->RDR & (uint8_t)(uhMask & 0xFFU)); + prxdata8bits++; + } + + husart->RxXferCount--; + + } + + + /* At end of Rx process, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Full-Duplex Send and Receive an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data and the received data are handled as sets of u16. In this case, Size must indicate the number + * of u16 available through pTxData and through pRxData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffers containing data to be sent/received, should be aligned on a half word frontier (16 bits) + * (as sent/received data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pTxData and pRxData. + * @param husart USART handle. + * @param pTxData pointer to TX data buffer (u8 or u16 data elements). + * @param pRxData pointer to RX data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be sent (same amount to be received). + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size, uint32_t Timeout) +{ + uint8_t *prxdata8bits; + uint16_t *prxdata16bits; + uint8_t *ptxdata8bits; + uint16_t *ptxdata16bits; + uint16_t uhMask; + uint16_t rxdatacount; + uint32_t tickstart; + + if (husart->State == HAL_USART_STATE_READY) + { + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pTxData and pRxData buffers provided as input parameter + should be aligned on a u16 frontier, as data to be filled into TDR/retrieved from RDR will be + handled through a u16 cast. */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + if (((((uint32_t)pTxData) & 1U) != 0U) || ((((uint32_t)pRxData) & 1U) != 0U)) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_RX; + + /* Init tickstart for timeout managment*/ + tickstart = HAL_GetTick(); + + husart->RxXferSize = Size; + husart->TxXferSize = Size; + husart->TxXferCount = Size; + husart->RxXferCount = Size; + + /* Computation of USART mask to apply to RDR register */ + USART_MASK_COMPUTATION(husart); + uhMask = husart->Mask; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + prxdata8bits = NULL; + ptxdata8bits = NULL; + ptxdata16bits = (uint16_t *) pTxData; + prxdata16bits = (uint16_t *) pRxData; + } + else + { + prxdata8bits = pRxData; + ptxdata8bits = pTxData; + ptxdata16bits = NULL; + prxdata16bits = NULL; + } + + if (husart->TxXferCount == 0x01U) + { + /* Wait until TXE flag is set to send data */ + if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + if (ptxdata8bits == NULL) + { + husart->Instance->TDR = (uint16_t)(*ptxdata16bits & uhMask); + ptxdata16bits++; + } + else + { + husart->Instance->TDR = (uint8_t)(*ptxdata8bits & (uint8_t)(uhMask & 0xFFU)); + ptxdata8bits++; + } + + husart->TxXferCount--; + } + + /* Check the remain data to be sent */ + /* rxdatacount is a temporary variable for MISRAC2012-Rule-13.5 */ + rxdatacount = husart->RxXferCount; + while ((husart->TxXferCount > 0U) || (rxdatacount > 0U)) + { + if (husart->TxXferCount > 0U) + { + /* Wait until TXE flag is set to send data */ + if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + if (ptxdata8bits == NULL) + { + husart->Instance->TDR = (uint16_t)(*ptxdata16bits & uhMask); + ptxdata16bits++; + } + else + { + husart->Instance->TDR = (uint8_t)(*ptxdata8bits & (uint8_t)(uhMask & 0xFFU)); + ptxdata8bits++; + } + + husart->TxXferCount--; + } + + if (husart->RxXferCount > 0U) + { + /* Wait for RXNE Flag */ + if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + if (prxdata8bits == NULL) + { + *prxdata16bits = (uint16_t)(husart->Instance->RDR & uhMask); + prxdata16bits++; + } + else + { + *prxdata8bits = (uint8_t)(husart->Instance->RDR & (uint8_t)(uhMask & 0xFFU)); + prxdata8bits++; + } + + husart->RxXferCount--; + } + rxdatacount = husart->RxXferCount; + } + + /* At end of TxRx process, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in interrupt mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pTxData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pTxData. + * @param husart USART handle. + * @param pTxData pointer to data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size) +{ + if (husart->State == HAL_USART_STATE_READY) + { + if ((pTxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pTxData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be filled into TDR will be + handled through a u16 cast. */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + if ((((uint32_t)pTxData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->pTxBuffPtr = pTxData; + husart->TxXferSize = Size; + husart->TxXferCount = Size; + husart->TxISR = NULL; + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_TX; + + /* The USART Error Interrupts: (Frame error, noise error, overrun error) + are not managed by the USART Transmit Process to avoid the overrun interrupt + when the usart mode is configured for transmit and receive "USART_MODE_TX_RX" + to benefit for the frame error and noise interrupts the usart mode should be + configured only for transmit "USART_MODE_TX" */ + + { + /* Set the Tx ISR function pointer according to the data word length */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + husart->TxISR = USART_TxISR_16BIT; + } + else + { + husart->TxISR = USART_TxISR_8BIT; + } + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Enable the USART Transmit Data Register Empty Interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_TXE); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in interrupt mode. + * @note To receive synchronous data, dummy data are simultaneously transmitted. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pRxData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits) + * (as received data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pRxData. + * @param husart USART handle. + * @param pRxData pointer to data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size) +{ + + if (husart->State == HAL_USART_STATE_READY) + { + if ((pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pRxData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be received from RDR will be + handled through a u16 cast. */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + if ((((uint32_t)pRxData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->pRxBuffPtr = pRxData; + husart->RxXferSize = Size; + husart->RxXferCount = Size; + husart->RxISR = NULL; + + USART_MASK_COMPUTATION(husart); + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_RX; + + /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(husart->Instance->CR3, USART_CR3_EIE); + + { + /* Set the Rx ISR function pointer according to the data word length */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + husart->RxISR = USART_RxISR_16BIT; + } + else + { + husart->RxISR = USART_RxISR_8BIT; + } + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Enable the USART Parity Error and Data Register not empty Interrupts */ + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE); + } + + { + /* Send dummy data in order to generate the clock for the Slave to send the next data. + */ + { + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF); + } + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Full-Duplex Send and Receive an amount of data in interrupt mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data and the received data are handled as sets of u16. In this case, Size must indicate the number + * of u16 available through pTxData and through pRxData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffers containing data to be sent/received, should be aligned on a half word frontier (16 bits) + * (as sent/received data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pTxData and pRxData. + * @param husart USART handle. + * @param pTxData pointer to TX data buffer (u8 or u16 data elements). + * @param pRxData pointer to RX data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be sent (same amount to be received). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size) +{ + + if (husart->State == HAL_USART_STATE_READY) + { + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pTxData and pRxData buffers provided as input parameter + should be aligned on a u16 frontier, as data to be filled into TDR/retrieved from RDR will be + handled through a u16 cast. */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + if (((((uint32_t)pTxData) & 1U) != 0U) || ((((uint32_t)pRxData) & 1U) != 0U)) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->pRxBuffPtr = pRxData; + husart->RxXferSize = Size; + husart->RxXferCount = Size; + husart->pTxBuffPtr = pTxData; + husart->TxXferSize = Size; + husart->TxXferCount = Size; + + /* Computation of USART mask to apply to RDR register */ + USART_MASK_COMPUTATION(husart); + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_TX_RX; + + { + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + husart->TxISR = USART_TxISR_16BIT; + husart->RxISR = USART_RxISR_16BIT; + } + else + { + husart->TxISR = USART_TxISR_8BIT; + husart->RxISR = USART_RxISR_8BIT; + } + + /* Process Locked */ + __HAL_UNLOCK(husart); + + /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Enable the USART Parity Error and USART Data Register not empty Interrupts */ + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE); + + /* Enable the USART Transmit Data Register Empty Interrupt */ + SET_BIT(husart->Instance->CR1, USART_CR1_TXEIE); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in DMA mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pTxData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled by DMA from halfword frontier). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pTxData. + * @param husart USART handle. + * @param pTxData pointer to data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t *tmp; + + if (husart->State == HAL_USART_STATE_READY) + { + if ((pTxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pTxData buffer provided as input parameter + should be aligned on a u16 frontier, as data copy into TDR will be + handled by DMA from a u16 frontier. */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + if ((((uint32_t)pTxData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->pTxBuffPtr = pTxData; + husart->TxXferSize = Size; + husart->TxXferCount = Size; + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_TX; + + if (husart->hdmatx != NULL) + { + /* Set the USART DMA transfer complete callback */ + husart->hdmatx->XferCpltCallback = USART_DMATransmitCplt; + + /* Set the USART DMA Half transfer complete callback */ + husart->hdmatx->XferHalfCpltCallback = USART_DMATxHalfCplt; + + /* Set the DMA error callback */ + husart->hdmatx->XferErrorCallback = USART_DMAError; + + /* Enable the USART transmit DMA channel */ + tmp = (uint32_t *)&pTxData; + status = HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t *)tmp, (uint32_t)&husart->Instance->TDR, Size); + } + + if (status == HAL_OK) + { + /* Clear the TC flag in the ICR register */ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_TCF); + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the USART CR3 register */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + return HAL_OK; + } + else + { + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Restore husart->State to ready */ + husart->State = HAL_USART_STATE_READY; + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in DMA mode. + * @note When the USART parity is enabled (PCE = 1), the received data contain + * the parity bit (MSB position). + * @note The USART DMA transmit channel must be configured in order to generate the clock for the slave. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pRxData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits) + * (as received data will be handled by DMA from halfword frontier). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pRxData. + * @param husart USART handle. + * @param pRxData pointer to data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t *tmp = (uint32_t *)&pRxData; + + /* Check that a Rx process is not already ongoing */ + if (husart->State == HAL_USART_STATE_READY) + { + if ((pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pRxData buffer provided as input parameter + should be aligned on a u16 frontier, as data copy from RDR will be + handled by DMA from a u16 frontier. */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + if ((((uint32_t)pRxData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->pRxBuffPtr = pRxData; + husart->RxXferSize = Size; + husart->pTxBuffPtr = pRxData; + husart->TxXferSize = Size; + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_RX; + + if (husart->hdmarx != NULL) + { + /* Set the USART DMA Rx transfer complete callback */ + husart->hdmarx->XferCpltCallback = USART_DMAReceiveCplt; + + /* Set the USART DMA Half transfer complete callback */ + husart->hdmarx->XferHalfCpltCallback = USART_DMARxHalfCplt; + + /* Set the USART DMA Rx transfer error callback */ + husart->hdmarx->XferErrorCallback = USART_DMAError; + + /* Enable the USART receive DMA channel */ + status = HAL_DMA_Start_IT(husart->hdmarx, (uint32_t)&husart->Instance->RDR, *(uint32_t *)tmp, Size); + } + + { + /* Enable the USART transmit DMA channel: the transmit channel is used in order + to generate in the non-blocking mode the clock to the slave device, + this mode isn't a simplex receive mode but a full-duplex receive mode */ + + /* Set the USART DMA Tx Complete and Error callback to Null */ + if (husart->hdmatx != NULL) + { + husart->hdmatx->XferErrorCallback = NULL; + husart->hdmatx->XferHalfCpltCallback = NULL; + husart->hdmatx->XferCpltCallback = NULL; + status = HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t *)tmp, (uint32_t)&husart->Instance->TDR, Size); + } + } + + if (status == HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Enable the USART Parity Error Interrupt */ + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE); + + /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the USART CR3 register */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAR); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the USART CR3 register */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + return HAL_OK; + } + else + { + if (husart->hdmarx != NULL) + { + status = HAL_DMA_Abort(husart->hdmarx); + } + + /* No need to check on error code */ + UNUSED(status); + + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Restore husart->State to ready */ + husart->State = HAL_USART_STATE_READY; + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Full-Duplex Transmit Receive an amount of data in non-blocking mode. + * @note When the USART parity is enabled (PCE = 1) the data received contain the parity bit. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data and the received data are handled as sets of u16. In this case, Size must indicate the number + * of u16 available through pTxData and through pRxData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffers containing data to be sent/received, should be aligned on a half word frontier (16 bits) + * (as sent/received data will be handled by DMA from halfword frontier). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pTxData and pRxData. + * @param husart USART handle. + * @param pTxData pointer to TX data buffer (u8 or u16 data elements). + * @param pRxData pointer to RX data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be received/sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size) +{ + HAL_StatusTypeDef status; + uint32_t *tmp; + + if (husart->State == HAL_USART_STATE_READY) + { + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pTxData and pRxData buffers provided as input parameter + should be aligned on a u16 frontier, as data copy to/from TDR/RDR will be + handled by DMA from a u16 frontier. */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + if (((((uint32_t)pTxData) & 1U) != 0U) || ((((uint32_t)pRxData) & 1U) != 0U)) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->pRxBuffPtr = pRxData; + husart->RxXferSize = Size; + husart->pTxBuffPtr = pTxData; + husart->TxXferSize = Size; + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_TX_RX; + + if ((husart->hdmarx != NULL) && (husart->hdmatx != NULL)) + { + /* Set the USART DMA Rx transfer complete callback */ + husart->hdmarx->XferCpltCallback = USART_DMAReceiveCplt; + + /* Set the USART DMA Half transfer complete callback */ + husart->hdmarx->XferHalfCpltCallback = USART_DMARxHalfCplt; + + /* Set the USART DMA Tx transfer complete callback */ + husart->hdmatx->XferCpltCallback = USART_DMATransmitCplt; + + /* Set the USART DMA Half transfer complete callback */ + husart->hdmatx->XferHalfCpltCallback = USART_DMATxHalfCplt; + + /* Set the USART DMA Tx transfer error callback */ + husart->hdmatx->XferErrorCallback = USART_DMAError; + + /* Set the USART DMA Rx transfer error callback */ + husart->hdmarx->XferErrorCallback = USART_DMAError; + + /* Enable the USART receive DMA channel */ + tmp = (uint32_t *)&pRxData; + status = HAL_DMA_Start_IT(husart->hdmarx, (uint32_t)&husart->Instance->RDR, *(uint32_t *)tmp, Size); + + /* Enable the USART transmit DMA channel */ + if (status == HAL_OK) + { + tmp = (uint32_t *)&pTxData; + status = HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t *)tmp, (uint32_t)&husart->Instance->TDR, Size); + } + } + else + { + status = HAL_ERROR; + } + + if (status == HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Enable the USART Parity Error Interrupt */ + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE); + + /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Clear the TC flag in the ICR register */ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_TCF); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the USART CR3 register */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAR); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the USART CR3 register */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + return HAL_OK; + } + else + { + if (husart->hdmarx != NULL) + { + status = HAL_DMA_Abort(husart->hdmarx); + } + + /* No need to check on error code */ + UNUSED(status); + + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Restore husart->State to ready */ + husart->State = HAL_USART_STATE_READY; + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Pause the DMA Transfer. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + + /* Process Locked */ + __HAL_LOCK(husart); + + if ((HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAT)) && + (state == HAL_USART_STATE_BUSY_TX)) + { + /* Disable the USART DMA Tx request */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT); + } + else if ((state == HAL_USART_STATE_BUSY_RX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable the USART DMA Tx request */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT); + } + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(husart->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Disable the USART DMA Rx request */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR); + } + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Resume the DMA Transfer. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + + /* Process Locked */ + __HAL_LOCK(husart); + + if (state == HAL_USART_STATE_BUSY_TX) + { + /* Enable the USART DMA Tx request */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAT); + } + else if ((state == HAL_USART_STATE_BUSY_RX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + /* Clear the Overrun flag before resuming the Rx transfer*/ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_OREF); + + /* Reenable PE and ERR (Frame error, noise error, overrun error) interrupts */ + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE); + SET_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Enable the USART DMA Rx request before the DMA Tx request */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAR); + + /* Enable the USART DMA Tx request */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAT); + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Stop the DMA Transfer. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart) +{ + /* The Lock is not implemented on this API to allow the user application + to call the HAL USART API under callbacks HAL_USART_TxCpltCallback() / HAL_USART_RxCpltCallback() / + HAL_USART_TxHalfCpltCallback / HAL_USART_RxHalfCpltCallback: + indeed, when HAL_DMA_Abort() API is called, the DMA TX/RX Transfer or Half Transfer complete + interrupt is generated if the DMA transfer interruption occurs at the middle or at the end of + the stream and the corresponding call back is executed. */ + + /* Disable the USART Tx/Rx DMA requests */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT); + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the USART DMA tx channel */ + if (husart->hdmatx != NULL) + { + if (HAL_DMA_Abort(husart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(husart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + /* Abort the USART DMA rx channel */ + if (husart->hdmarx != NULL) + { + if (HAL_DMA_Abort(husart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(husart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + + USART_EndTransfer(husart); + husart->State = HAL_USART_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (blocking mode). + * @param husart USART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable USART Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Abort(USART_HandleTypeDef *husart) +{ + CLEAR_BIT(husart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE)); + CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Disable the USART DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the USART DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (husart->hdmatx != NULL) + { + /* Set the USART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + husart->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(husart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(husart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Disable the USART DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the USART DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (husart->hdmarx != NULL) + { + /* Set the USART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + husart->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(husart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(husart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Tx and Rx transfer counters */ + husart->TxXferCount = 0U; + husart->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_OREF | USART_CLEAR_NEF | USART_CLEAR_PEF | USART_CLEAR_FEF); + + + /* Discard the received data */ + __HAL_USART_SEND_REQ(husart, USART_RXDATA_FLUSH_REQUEST); + + /* Restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + + /* Reset Handle ErrorCode to No Error */ + husart->ErrorCode = HAL_USART_ERROR_NONE; + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (Interrupt mode). + * @param husart USART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable USART Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Abort_IT(USART_HandleTypeDef *husart) +{ + uint32_t abortcplt = 1U; + + CLEAR_BIT(husart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE)); + CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* If DMA Tx and/or DMA Rx Handles are associated to USART Handle, DMA Abort complete callbacks should be initialised + before any call to DMA Abort functions */ + /* DMA Tx Handle is valid */ + if (husart->hdmatx != NULL) + { + /* Set DMA Abort Complete callback if USART DMA Tx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAT)) + { + husart->hdmatx->XferAbortCallback = USART_DMATxAbortCallback; + } + else + { + husart->hdmatx->XferAbortCallback = NULL; + } + } + /* DMA Rx Handle is valid */ + if (husart->hdmarx != NULL) + { + /* Set DMA Abort Complete callback if USART DMA Rx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR)) + { + husart->hdmarx->XferAbortCallback = USART_DMARxAbortCallback; + } + else + { + husart->hdmarx->XferAbortCallback = NULL; + } + } + + /* Disable the USART DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable DMA Tx at USART level */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the USART DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (husart->hdmatx != NULL) + { + /* USART Tx DMA Abort callback has already been initialised : + will lead to call HAL_USART_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(husart->hdmatx) != HAL_OK) + { + husart->hdmatx->XferAbortCallback = NULL; + } + else + { + abortcplt = 0U; + } + } + } + + /* Disable the USART DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the USART DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (husart->hdmarx != NULL) + { + /* USART Rx DMA Abort callback has already been initialised : + will lead to call HAL_USART_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(husart->hdmarx) != HAL_OK) + { + husart->hdmarx->XferAbortCallback = NULL; + abortcplt = 1U; + } + else + { + abortcplt = 0U; + } + } + } + + /* if no DMA abort complete callback execution is required => call user Abort Complete callback */ + if (abortcplt == 1U) + { + /* Reset Tx and Rx transfer counters */ + husart->TxXferCount = 0U; + husart->RxXferCount = 0U; + + /* Reset errorCode */ + husart->ErrorCode = HAL_USART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_OREF | USART_CLEAR_NEF | USART_CLEAR_PEF | USART_CLEAR_FEF); + + + /* Discard the received data */ + __HAL_USART_SEND_REQ(husart, USART_RXDATA_FLUSH_REQUEST); + + /* Restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Complete Callback */ + husart->AbortCpltCallback(husart); +#else + /* Call legacy weak Abort Complete Callback */ + HAL_USART_AbortCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Handle USART interrupt request. + * @param husart USART handle. + * @retval None + */ +void HAL_USART_IRQHandler(USART_HandleTypeDef *husart) +{ + uint32_t isrflags = READ_REG(husart->Instance->ISR); + uint32_t cr1its = READ_REG(husart->Instance->CR1); + uint32_t cr3its = READ_REG(husart->Instance->CR3); + + uint32_t errorflags; + uint32_t errorcode; + + /* If no error occurs */ + errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE)); + if (errorflags == 0U) + { + /* USART in mode Receiver ---------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE) != 0U) + && ((cr1its & USART_CR1_RXNEIE) != 0U)) + { + if (husart->RxISR != NULL) + { + husart->RxISR(husart); + } + return; + } + } + + /* If some errors occur */ + if ((errorflags != 0U) + && (((cr3its & USART_CR3_EIE) != 0U) + || ((cr1its & (USART_CR1_RXNEIE | USART_CR1_PEIE)) != 0U))) + { + /* USART parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_USART_CLEAR_IT(husart, USART_CLEAR_PEF); + + husart->ErrorCode |= HAL_USART_ERROR_PE; + } + + /* USART frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_USART_CLEAR_IT(husart, USART_CLEAR_FEF); + + husart->ErrorCode |= HAL_USART_ERROR_FE; + } + + /* USART noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_USART_CLEAR_IT(husart, USART_CLEAR_NEF); + + husart->ErrorCode |= HAL_USART_ERROR_NE; + } + + /* USART Over-Run interrupt occurred -----------------------------------------*/ + if (((isrflags & USART_ISR_ORE) != 0U) + && (((cr1its & USART_CR1_RXNEIE) != 0U) || + ((cr3its & USART_CR3_EIE) != 0U))) + { + __HAL_USART_CLEAR_IT(husart, USART_CLEAR_OREF); + + husart->ErrorCode |= HAL_USART_ERROR_ORE; + } + + + /* Call USART Error Call back function if need be --------------------------*/ + if (husart->ErrorCode != HAL_USART_ERROR_NONE) + { + /* USART in mode Receiver ---------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE) != 0U) + && ((cr1its & USART_CR1_RXNEIE) != 0U)) + { + if (husart->RxISR != NULL) + { + husart->RxISR(husart); + } + } + + /* If Overrun error occurs, or if any error occurs in DMA mode reception, + consider error as blocking */ + errorcode = husart->ErrorCode & HAL_USART_ERROR_ORE; + if ((HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR)) || + (errorcode != 0U)) + { + /* Blocking error : transfer is aborted + Set the USART state ready to be able to start again the process, + Disable Interrupts, and disable DMA requests, if ongoing */ + USART_EndTransfer(husart); + + /* Disable the USART DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR | USART_CR3_DMAR); + + /* Abort the USART DMA Tx channel */ + if (husart->hdmatx != NULL) + { + /* Set the USART Tx DMA Abort callback to NULL : no callback + executed at end of DMA abort procedure */ + husart->hdmatx->XferAbortCallback = NULL; + + /* Abort DMA TX */ + (void)HAL_DMA_Abort_IT(husart->hdmatx); + } + + /* Abort the USART DMA Rx channel */ + if (husart->hdmarx != NULL) + { + /* Set the USART Rx DMA Abort callback : + will lead to call HAL_USART_ErrorCallback() at end of DMA abort procedure */ + husart->hdmarx->XferAbortCallback = USART_DMAAbortOnError; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(husart->hdmarx) != HAL_OK) + { + /* Call Directly husart->hdmarx->XferAbortCallback function in case of error */ + husart->hdmarx->XferAbortCallback(husart->hdmarx); + } + } + else + { + /* Call user error callback */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Error Callback */ + husart->ErrorCallback(husart); +#else + /* Call legacy weak Error Callback */ + HAL_USART_ErrorCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + } + else + { + /* Call user error callback */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Error Callback */ + husart->ErrorCallback(husart); +#else + /* Call legacy weak Error Callback */ + HAL_USART_ErrorCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + } + else + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Error Callback */ + husart->ErrorCallback(husart); +#else + /* Call legacy weak Error Callback */ + HAL_USART_ErrorCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + husart->ErrorCode = HAL_USART_ERROR_NONE; + } + } + return; + + } /* End if some error occurs */ + + + /* USART in mode Transmitter ------------------------------------------------*/ + if (((isrflags & USART_ISR_TXE) != 0U) + && ((cr1its & USART_CR1_TXEIE) != 0U)) + { + if (husart->TxISR != NULL) + { + husart->TxISR(husart); + } + return; + } + + /* USART in mode Transmitter (transmission end) -----------------------------*/ + if (((isrflags & USART_ISR_TC) != 0U) && ((cr1its & USART_CR1_TCIE) != 0U)) + { + USART_EndTransmit_IT(husart); + return; + } + +} + +/** + * @brief Tx Transfer completed callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USART_TxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Tx Half Transfer completed callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_USART_TxHalfCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_USART_RxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Half Transfer completed callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USART_RxHalfCpltCallback can be implemented in the user file + */ +} + +/** + * @brief Tx/Rx Transfers completed callback for the non-blocking process. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USART_TxRxCpltCallback can be implemented in the user file + */ +} + +/** + * @brief USART error callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USART_ErrorCallback can be implemented in the user file. + */ +} + +/** + * @brief USART Abort Complete callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_AbortCpltCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USART_AbortCpltCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup USART_Exported_Functions_Group4 Peripheral State and Error functions + * @brief USART Peripheral State and Error functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Error functions ##### + ============================================================================== + [..] + This subsection provides functions allowing to : + (+) Return the USART handle state + (+) Return the USART handle error code + +@endverbatim + * @{ + */ + + +/** + * @brief Return the USART handle state. + * @param husart pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART. + * @retval USART handle state + */ +HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart) +{ + return husart->State; +} + +/** + * @brief Return the USART error code. + * @param husart pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART. + * @retval USART handle Error Code + */ +uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart) +{ + return husart->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup USART_Private_Functions USART Private Functions + * @{ + */ + +/** + * @brief Initialize the callbacks to their default values. + * @param husart USART handle. + * @retval none + */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) +void USART_InitCallbacksToDefault(USART_HandleTypeDef *husart) +{ + /* Init the USART Callback settings */ + husart->TxHalfCpltCallback = HAL_USART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + husart->TxCpltCallback = HAL_USART_TxCpltCallback; /* Legacy weak TxCpltCallback */ + husart->RxHalfCpltCallback = HAL_USART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + husart->RxCpltCallback = HAL_USART_RxCpltCallback; /* Legacy weak RxCpltCallback */ + husart->TxRxCpltCallback = HAL_USART_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */ + husart->ErrorCallback = HAL_USART_ErrorCallback; /* Legacy weak ErrorCallback */ + husart->AbortCpltCallback = HAL_USART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ +} +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + +/** + * @brief End ongoing transfer on USART peripheral (following error detection or Transfer completion). + * @param husart USART handle. + * @retval None + */ +static void USART_EndTransfer(USART_HandleTypeDef *husart) +{ + /* Disable TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(husart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE)); + CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* At end of process, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; +} + +/** + * @brief DMA USART transmit process complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + + /* DMA Normal mode */ + if (HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC)) + { + husart->TxXferCount = 0U; + + if (husart->State == HAL_USART_STATE_BUSY_TX) + { + /* Disable the DMA transfer for transmit request by resetting the DMAT bit + in the USART CR3 register */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + /* Enable the USART Transmit Complete Interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_TC); + } + } + /* DMA Circular mode */ + else + { + if (husart->State == HAL_USART_STATE_BUSY_TX) + { +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Complete Callback */ + husart->TxCpltCallback(husart); +#else + /* Call legacy weak Tx Complete Callback */ + HAL_USART_TxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + } +} + +/** + * @brief DMA USART transmit process half complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMATxHalfCplt(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Half Complete Callback */ + husart->TxHalfCpltCallback(husart); +#else + /* Call legacy weak Tx Half Complete Callback */ + HAL_USART_TxHalfCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA USART receive process complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + + /* DMA Normal mode */ + if (HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC)) + { + husart->RxXferCount = 0U; + + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(husart->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA RX transfer for the receiver request by resetting the DMAR bit + in USART CR3 register */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR); + /* similarly, disable the DMA TX transfer that was started to provide the + clock to the slave device */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + if (husart->State == HAL_USART_STATE_BUSY_RX) + { +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Complete Callback */ + husart->RxCpltCallback(husart); +#else + /* Call legacy weak Rx Complete Callback */ + HAL_USART_RxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + /* The USART state is HAL_USART_STATE_BUSY_TX_RX */ + else + { +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Rx Complete Callback */ + husart->TxRxCpltCallback(husart); +#else + /* Call legacy weak Tx Rx Complete Callback */ + HAL_USART_TxRxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + husart->State = HAL_USART_STATE_READY; + } + /* DMA circular mode */ + else + { + if (husart->State == HAL_USART_STATE_BUSY_RX) + { +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Complete Callback */ + husart->RxCpltCallback(husart); +#else + /* Call legacy weak Rx Complete Callback */ + HAL_USART_RxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + /* The USART state is HAL_USART_STATE_BUSY_TX_RX */ + else + { +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Rx Complete Callback */ + husart->TxRxCpltCallback(husart); +#else + /* Call legacy weak Tx Rx Complete Callback */ + HAL_USART_TxRxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + } +} + +/** + * @brief DMA USART receive process half complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMARxHalfCplt(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Half Complete Callback */ + husart->RxHalfCpltCallback(husart); +#else + /* Call legacy weak Rx Half Complete Callback */ + HAL_USART_RxHalfCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA USART communication error callback. + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMAError(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + + husart->RxXferCount = 0U; + husart->TxXferCount = 0U; + USART_EndTransfer(husart); + + husart->ErrorCode |= HAL_USART_ERROR_DMA; + husart->State = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Error Callback */ + husart->ErrorCallback(husart); +#else + /* Call legacy weak Error Callback */ + HAL_USART_ErrorCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA USART communication abort callback, when initiated by HAL services on Error + * (To be called at end of DMA Abort procedure following error occurrence). + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMAAbortOnError(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + husart->RxXferCount = 0U; + husart->TxXferCount = 0U; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Error Callback */ + husart->ErrorCallback(husart); +#else + /* Call legacy weak Error Callback */ + HAL_USART_ErrorCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA USART Tx communication abort callback, when initiated by user + * (To be called at end of DMA Tx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Rx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMATxAbortCallback(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + + husart->hdmatx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (husart->hdmarx != NULL) + { + if (husart->hdmarx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + husart->TxXferCount = 0U; + husart->RxXferCount = 0U; + + /* Reset errorCode */ + husart->ErrorCode = HAL_USART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_OREF | USART_CLEAR_NEF | USART_CLEAR_PEF | USART_CLEAR_FEF); + + /* Restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Complete Callback */ + husart->AbortCpltCallback(husart); +#else + /* Call legacy weak Abort Complete Callback */ + HAL_USART_AbortCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + +} + + +/** + * @brief DMA USART Rx communication abort callback, when initiated by user + * (To be called at end of DMA Rx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Tx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMARxAbortCallback(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + + husart->hdmarx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (husart->hdmatx != NULL) + { + if (husart->hdmatx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + husart->TxXferCount = 0U; + husart->RxXferCount = 0U; + + /* Reset errorCode */ + husart->ErrorCode = HAL_USART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_OREF | USART_CLEAR_NEF | USART_CLEAR_PEF | USART_CLEAR_FEF); + + /* Restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Complete Callback */ + husart->AbortCpltCallback(husart); +#else + /* Call legacy weak Abort Complete Callback */ + HAL_USART_AbortCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ +} + + +/** + * @brief Handle USART Communication Timeout. + * @param husart USART handle. + * @param Flag Specifies the USART flag to check. + * @param Status the Flag status (SET or RESET). + * @param Tickstart Tick start value + * @param Timeout timeout duration. + * @retval HAL status + */ +static HAL_StatusTypeDef USART_WaitOnFlagUntilTimeout(USART_HandleTypeDef *husart, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout) +{ + /* Wait until flag is set */ + while ((__HAL_USART_GET_FLAG(husart, Flag) ? SET : RESET) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_TIMEOUT; + } + } + } + return HAL_OK; +} + +/** + * @brief Configure the USART peripheral. + * @param husart USART handle. + * @retval HAL status + */ +static HAL_StatusTypeDef USART_SetConfig(USART_HandleTypeDef *husart) +{ + uint32_t tmpreg; + USART_ClockSourceTypeDef clocksource; + HAL_StatusTypeDef ret = HAL_OK; + uint16_t brrtemp; + uint32_t usartdiv = 0x00000000; + uint32_t pclk; + + /* Check the parameters */ + assert_param(IS_USART_POLARITY(husart->Init.CLKPolarity)); + assert_param(IS_USART_PHASE(husart->Init.CLKPhase)); + assert_param(IS_USART_LASTBIT(husart->Init.CLKLastBit)); + assert_param(IS_USART_BAUDRATE(husart->Init.BaudRate)); + assert_param(IS_USART_WORD_LENGTH(husart->Init.WordLength)); + assert_param(IS_USART_STOPBITS(husart->Init.StopBits)); + assert_param(IS_USART_PARITY(husart->Init.Parity)); + assert_param(IS_USART_MODE(husart->Init.Mode)); + + /*-------------------------- USART CR1 Configuration -----------------------*/ + /* Clear M, PCE, PS, TE and RE bits and configure + * the USART Word Length, Parity and Mode: + * set the M bits according to husart->Init.WordLength value + * set PCE and PS bits according to husart->Init.Parity value + * set TE and RE bits according to husart->Init.Mode value + * force OVER8 to 1 to allow to reach the maximum speed (Fclock/8) */ + tmpreg = (uint32_t)husart->Init.WordLength | husart->Init.Parity | husart->Init.Mode | USART_CR1_OVER8; + MODIFY_REG(husart->Instance->CR1, USART_CR1_FIELDS, tmpreg); + + /*---------------------------- USART CR2 Configuration ---------------------*/ + /* Clear and configure the USART Clock, CPOL, CPHA, LBCL and STOP bits: + * set CPOL bit according to husart->Init.CLKPolarity value + * set CPHA bit according to husart->Init.CLKPhase value + * set LBCL bit according to husart->Init.CLKLastBit value (used in SPI master mode only) + * set STOP[13:12] bits according to husart->Init.StopBits value */ + tmpreg = (uint32_t)(USART_CLOCK_ENABLE); + tmpreg |= (uint32_t)husart->Init.CLKLastBit; + tmpreg |= ((uint32_t)husart->Init.CLKPolarity | (uint32_t)husart->Init.CLKPhase); + tmpreg |= (uint32_t)husart->Init.StopBits; + MODIFY_REG(husart->Instance->CR2, USART_CR2_FIELDS, tmpreg); + + + /*-------------------------- USART BRR Configuration -----------------------*/ + /* BRR is filled-up according to OVER8 bit setting which is forced to 1 */ + USART_GETCLOCKSOURCE(husart, clocksource); + + switch (clocksource) + { + case USART_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + usartdiv = (uint32_t)(USART_DIV_SAMPLING8(pclk, husart->Init.BaudRate)); + break; + case USART_CLOCKSOURCE_HSI: + usartdiv = (uint32_t)(USART_DIV_SAMPLING8(HSI_VALUE, husart->Init.BaudRate)); + break; + case USART_CLOCKSOURCE_SYSCLK: + pclk = HAL_RCC_GetSysClockFreq(); + usartdiv = (uint32_t)(USART_DIV_SAMPLING8(pclk, husart->Init.BaudRate)); + break; + case USART_CLOCKSOURCE_LSE: + usartdiv = (uint32_t)(USART_DIV_SAMPLING8(LSE_VALUE, husart->Init.BaudRate)); + break; + default: + ret = HAL_ERROR; + break; + } + + /* USARTDIV must be greater than or equal to 0d16 and smaller than or equal to ffff */ + if ((usartdiv >= USART_BRR_MIN) && (usartdiv <= USART_BRR_MAX)) + { + brrtemp = (uint16_t)(usartdiv & 0xFFF0U); + brrtemp |= (uint16_t)((usartdiv & (uint16_t)0x000FU) >> 1U); + husart->Instance->BRR = brrtemp; + } + else + { + ret = HAL_ERROR; + } + + + /* Clear ISR function pointers */ + husart->RxISR = NULL; + husart->TxISR = NULL; + + return ret; +} + +/** + * @brief Check the USART Idle State. + * @param husart USART handle. + * @retval HAL status + */ +static HAL_StatusTypeDef USART_CheckIdleState(USART_HandleTypeDef *husart) +{ + uint32_t tickstart; + + /* Initialize the USART ErrorCode */ + husart->ErrorCode = HAL_USART_ERROR_NONE; + + /* Init tickstart for timeout managment*/ + tickstart = HAL_GetTick(); + + /* Check if the Transmitter is enabled */ + if ((husart->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE) + { + /* Wait until TEACK flag is set */ + if (USART_WaitOnFlagUntilTimeout(husart, USART_ISR_TEACK, RESET, tickstart, USART_TEACK_REACK_TIMEOUT) != HAL_OK) + { + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + /* Check if the Receiver is enabled */ + if ((husart->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE) + { + /* Wait until REACK flag is set */ + if (USART_WaitOnFlagUntilTimeout(husart, USART_ISR_REACK, RESET, tickstart, USART_TEACK_REACK_TIMEOUT) != HAL_OK) + { + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + + /* Initialize the USART state*/ + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Simplex send an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_USART_Transmit_IT(). + * @note The USART errors are not managed to avoid the overrun error. + * @note ISR function executed when data word length is less than 9 bits long. + * @param husart USART handle. + * @retval None + */ +static void USART_TxISR_8BIT(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + + /* Check that a Tx process is ongoing */ + if ((state == HAL_USART_STATE_BUSY_TX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + if (husart->TxXferCount == 0U) + { + /* Disable the USART Transmit data register empty interrupt */ + __HAL_USART_DISABLE_IT(husart, USART_IT_TXE); + + /* Enable the USART Transmit Complete Interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_TC); + } + else + { + husart->Instance->TDR = (uint8_t)(*husart->pTxBuffPtr & (uint8_t)0xFF); + husart->pTxBuffPtr++; + husart->TxXferCount--; + } + } +} + +/** + * @brief Simplex send an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_USART_Transmit_IT(). + * @note The USART errors are not managed to avoid the overrun error. + * @note ISR function executed when data word length is 9 bits long. + * @param husart USART handle. + * @retval None + */ +static void USART_TxISR_16BIT(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + uint16_t *tmp; + + if ((state == HAL_USART_STATE_BUSY_TX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + if (husart->TxXferCount == 0U) + { + /* Disable the USART Transmit data register empty interrupt */ + __HAL_USART_DISABLE_IT(husart, USART_IT_TXE); + + /* Enable the USART Transmit Complete Interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_TC); + } + else + { + tmp = (uint16_t *) husart->pTxBuffPtr; + husart->Instance->TDR = (uint16_t)(*tmp & 0x01FFU); + husart->pTxBuffPtr += 2U; + husart->TxXferCount--; + } + } +} + + +/** + * @brief Wraps up transmission in non-blocking mode. + * @param husart Pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @retval None + */ +static void USART_EndTransmit_IT(USART_HandleTypeDef *husart) +{ + /* Disable the USART Transmit Complete Interrupt */ + __HAL_USART_DISABLE_IT(husart, USART_IT_TC); + + /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + __HAL_USART_DISABLE_IT(husart, USART_IT_ERR); + + /* Clear TxISR function pointer */ + husart->TxISR = NULL; + + if (husart->State == HAL_USART_STATE_BUSY_TX) + { + /* Clear overrun flag and discard the received data */ + __HAL_USART_CLEAR_OREFLAG(husart); + __HAL_USART_SEND_REQ(husart, USART_RXDATA_FLUSH_REQUEST); + + /* Tx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Complete Callback */ + husart->TxCpltCallback(husart); +#else + /* Call legacy weak Tx Complete Callback */ + HAL_USART_TxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else if (husart->RxXferCount == 0U) + { + /* TxRx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Rx Complete Callback */ + husart->TxRxCpltCallback(husart); +#else + /* Call legacy weak Tx Rx Complete Callback */ + HAL_USART_TxRxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } +} + + +/** + * @brief Simplex receive an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_USART_Receive_IT(). + * @note ISR function executed when data word length is less than 9 bits long. + * @param husart USART handle + * @retval None + */ +static void USART_RxISR_8BIT(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + uint16_t txdatacount; + uint16_t uhMask = husart->Mask; + + if ((state == HAL_USART_STATE_BUSY_RX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + *husart->pRxBuffPtr = (uint8_t)(husart->Instance->RDR & (uint8_t)uhMask); + husart->pRxBuffPtr++; + husart->RxXferCount--; + + if (husart->RxXferCount == 0U) + { + /* Disable the USART Parity Error Interrupt and RXNE interrupt*/ + CLEAR_BIT(husart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); + + /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Clear RxISR function pointer */ + husart->RxISR = NULL; + + /* txdatacount is a temporary variable for MISRAC2012-Rule-13.5 */ + txdatacount = husart->TxXferCount; + + if (state == HAL_USART_STATE_BUSY_RX) + { + + /* Rx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Complete Callback */ + husart->RxCpltCallback(husart); +#else + /* Call legacy weak Rx Complete Callback */ + HAL_USART_RxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else if ((READ_BIT(husart->Instance->CR1, USART_CR1_TCIE) != USART_CR1_TCIE) && + (txdatacount == 0U)) + { + /* TxRx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Rx Complete Callback */ + husart->TxRxCpltCallback(husart); +#else + /* Call legacy weak Tx Rx Complete Callback */ + HAL_USART_TxRxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } + } + else if (state == HAL_USART_STATE_BUSY_RX) + { + /* Send dummy byte in order to generate the clock for the Slave to Send the next data */ + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF); + } + else + { + /* Nothing to do */ + } + } +} + +/** + * @brief Simplex receive an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_USART_Receive_IT(). + * @note ISR function executed when data word length is 9 bits long. + * @param husart USART handle + * @retval None + */ +static void USART_RxISR_16BIT(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + uint16_t txdatacount; + uint16_t *tmp; + uint16_t uhMask = husart->Mask; + + if ((state == HAL_USART_STATE_BUSY_RX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + tmp = (uint16_t *) husart->pRxBuffPtr; + *tmp = (uint16_t)(husart->Instance->RDR & uhMask); + husart->pRxBuffPtr += 2U; + husart->RxXferCount--; + + if (husart->RxXferCount == 0U) + { + /* Disable the USART Parity Error Interrupt and RXNE interrupt*/ + CLEAR_BIT(husart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); + + /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Clear RxISR function pointer */ + husart->RxISR = NULL; + + /* txdatacount is a temporary variable for MISRAC2012-Rule-13.5 */ + txdatacount = husart->TxXferCount; + + if (state == HAL_USART_STATE_BUSY_RX) + { + + /* Rx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Complete Callback */ + husart->RxCpltCallback(husart); +#else + /* Call legacy weak Rx Complete Callback */ + HAL_USART_RxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else if ((READ_BIT(husart->Instance->CR1, USART_CR1_TCIE) != USART_CR1_TCIE) && + (txdatacount == 0U)) + { + /* TxRx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Rx Complete Callback */ + husart->TxRxCpltCallback(husart); +#else + /* Call legacy weak Tx Rx Complete Callback */ + HAL_USART_TxRxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } + } + else if (state == HAL_USART_STATE_BUSY_RX) + { + /* Send dummy byte in order to generate the clock for the Slave to Send the next data */ + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF); + } + else + { + /* Nothing to do */ + } + } +} + + +/** + * @} + */ + +#endif /* HAL_USART_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit