From 94f94260ace13688285fc8c62687079b26c18854 Mon Sep 17 00:00:00 2001 From: jaseg Date: Sun, 20 Dec 2020 15:18:02 +0100 Subject: Submodule-cache WIP --- .../Src/stm32f0xx_hal_smartcard_ex.c | 204 --------------------- 1 file changed, 204 deletions(-) delete mode 100644 fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_smartcard_ex.c (limited to 'fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_smartcard_ex.c') diff --git a/fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_smartcard_ex.c b/fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_smartcard_ex.c deleted file mode 100644 index 8f60497..0000000 --- a/fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_smartcard_ex.c +++ /dev/null @@ -1,204 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f0xx_hal_smartcard_ex.c - * @author MCD Application Team - * @brief SMARTCARD HAL module driver. - * This file provides extended firmware functions to manage the following - * functionalities of the SmartCard. - * + Initialization and de-initialization functions - * + Peripheral Control functions - * - @verbatim - ============================================================================= - ##### SMARTCARD peripheral extended features ##### - ============================================================================= - [..] - The Extended SMARTCARD HAL driver can be used as follows: - - (#) After having configured the SMARTCARD basic features with HAL_SMARTCARD_Init(), - then program SMARTCARD advanced features if required (TX/RX pins swap, TimeOut, - auto-retry counter,...) in the hsmartcard AdvancedInit structure. - @endverbatim - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ -#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) -/* Includes ------------------------------------------------------------------*/ -#include "stm32f0xx_hal.h" - -/** @addtogroup STM32F0xx_HAL_Driver - * @{ - */ - -/** @defgroup SMARTCARDEx SMARTCARDEx - * @brief SMARTCARD Extended HAL module driver - * @{ - */ -#ifdef HAL_SMARTCARD_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @defgroup SMARTCARDEx_Exported_Functions SMARTCARD Extended Exported Functions - * @{ - */ - -/** @defgroup SMARTCARDEx_Exported_Functions_Group1 Extended Peripheral Control functions - * @brief Extended control functions - * -@verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to initialize the SMARTCARD. - (+) HAL_SMARTCARDEx_BlockLength_Config() API allows to configure the Block Length on the fly - (+) HAL_SMARTCARDEx_TimeOut_Config() API allows to configure the receiver timeout value on the fly - (+) HAL_SMARTCARDEx_EnableReceiverTimeOut() API enables the receiver timeout feature - (+) HAL_SMARTCARDEx_DisableReceiverTimeOut() API disables the receiver timeout feature - -@endverbatim - * @{ - */ - -/** @brief Update on the fly the SMARTCARD block length in RTOR register. - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @param BlockLength SMARTCARD block length (8-bit long at most) - * @retval None - */ -void HAL_SMARTCARDEx_BlockLength_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t BlockLength) -{ - MODIFY_REG(hsmartcard->Instance->RTOR, USART_RTOR_BLEN, ((uint32_t)BlockLength << USART_RTOR_BLEN_Pos)); -} - -/** @brief Update on the fly the receiver timeout value in RTOR register. - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @param TimeOutValue receiver timeout value in number of baud blocks. The timeout - * value must be less or equal to 0x0FFFFFFFF. - * @retval None - */ -void HAL_SMARTCARDEx_TimeOut_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t TimeOutValue) -{ - assert_param(IS_SMARTCARD_TIMEOUT_VALUE(hsmartcard->Init.TimeOutValue)); - MODIFY_REG(hsmartcard->Instance->RTOR, USART_RTOR_RTO, TimeOutValue); -} - -/** @brief Enable the SMARTCARD receiver timeout feature. - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SMARTCARDEx_EnableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard) -{ - if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hsmartcard); - - hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; - - /* Set the USART RTOEN bit */ - SET_BIT(hsmartcard->Instance->CR2, USART_CR2_RTOEN); - - hsmartcard->gState = HAL_SMARTCARD_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hsmartcard); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** @brief Disable the SMARTCARD receiver timeout feature. - * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains - * the configuration information for the specified SMARTCARD module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SMARTCARDEx_DisableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard) -{ - if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hsmartcard); - - hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; - - /* Clear the USART RTOEN bit */ - CLEAR_BIT(hsmartcard->Instance->CR2, USART_CR2_RTOEN); - - hsmartcard->gState = HAL_SMARTCARD_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hsmartcard); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @} - */ - -/** @defgroup SMARTCARDEx_Exported_Functions_Group2 Extended Peripheral IO operation functions - * @brief SMARTCARD Transmit and Receive functions - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - [..] -@endverbatim - * @{ - */ - -/** - * @} - */ - - -/** - * @} - */ - -/** @defgroup SMARTCARDEx_Private_Functions SMARTCARD Extended Private Functions - * @{ - */ - -/** - * @} - */ - -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -/** - * @} - */ - -/** - * @} - */ -#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit