From 6ab94e0b318884bbcb95e2ea3835f951502e1d99 Mon Sep 17 00:00:00 2001 From: jaseg Date: Wed, 14 Oct 2020 12:47:28 +0200 Subject: Move firmware into subdirectory --- .../Src/stm32f0xx_hal_smartcard.c | 2873 ++++++++++++++++++++ 1 file changed, 2873 insertions(+) create mode 100644 fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_smartcard.c (limited to 'fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_smartcard.c') diff --git a/fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_smartcard.c b/fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_smartcard.c new file mode 100644 index 0000000..4674aef --- /dev/null +++ b/fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_smartcard.c @@ -0,0 +1,2873 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_smartcard.c + * @author MCD Application Team + * @brief SMARTCARD HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the SMARTCARD peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State and Error functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The SMARTCARD HAL driver can be used as follows: + + (#) Declare a SMARTCARD_HandleTypeDef handle structure (eg. SMARTCARD_HandleTypeDef hsmartcard). + (#) Associate a USART to the SMARTCARD handle hsmartcard. + (#) Initialize the SMARTCARD low level resources by implementing the HAL_SMARTCARD_MspInit() API: + (++) Enable the USARTx interface clock. + (++) USART pins configuration: + (+++) Enable the clock for the USART GPIOs. + (+++) Configure the USART pins (TX as alternate function pull-up, RX as alternate function Input). + (++) NVIC configuration if you need to use interrupt process (HAL_SMARTCARD_Transmit_IT() + and HAL_SMARTCARD_Receive_IT() APIs): + (+++) Configure the USARTx interrupt priority. + (+++) Enable the NVIC USART IRQ handle. + (++) DMA Configuration if you need to use DMA process (HAL_SMARTCARD_Transmit_DMA() + and HAL_SMARTCARD_Receive_DMA() APIs): + (+++) Declare a DMA handle structure for the Tx/Rx channel. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx channel. + (+++) Associate the initialized DMA handle to the SMARTCARD DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx channel. + + (#) Program the Baud Rate, Parity, Mode(Receiver/Transmitter), clock enabling/disabling and accordingly, + the clock parameters (parity, phase, last bit), prescaler value, guard time and NACK on transmission + error enabling or disabling in the hsmartcard handle Init structure. + + (#) If required, program SMARTCARD advanced features (TX/RX pins swap, TimeOut, auto-retry counter,...) + in the hsmartcard handle AdvancedInit structure. + + (#) Initialize the SMARTCARD registers by calling the HAL_SMARTCARD_Init() API: + (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) + by calling the customized HAL_SMARTCARD_MspInit() API. + [..] + (@) The specific SMARTCARD interrupts (Transmission complete interrupt, + RXNE interrupt and Error Interrupts) will be managed using the macros + __HAL_SMARTCARD_ENABLE_IT() and __HAL_SMARTCARD_DISABLE_IT() inside the transmit and receive process. + + [..] + [..] Three operation modes are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Send an amount of data in blocking mode using HAL_SMARTCARD_Transmit() + (+) Receive an amount of data in blocking mode using HAL_SMARTCARD_Receive() + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Send an amount of data in non-blocking mode using HAL_SMARTCARD_Transmit_IT() + (+) At transmission end of transfer HAL_SMARTCARD_TxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_SMARTCARD_TxCpltCallback() + (+) Receive an amount of data in non-blocking mode using HAL_SMARTCARD_Receive_IT() + (+) At reception end of transfer HAL_SMARTCARD_RxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback() + (+) In case of transfer Error, HAL_SMARTCARD_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_SMARTCARD_ErrorCallback() + + *** DMA mode IO operation *** + ============================== + [..] + (+) Send an amount of data in non-blocking mode (DMA) using HAL_SMARTCARD_Transmit_DMA() + (+) At transmission end of transfer HAL_SMARTCARD_TxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_SMARTCARD_TxCpltCallback() + (+) Receive an amount of data in non-blocking mode (DMA) using HAL_SMARTCARD_Receive_DMA() + (+) At reception end of transfer HAL_SMARTCARD_RxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback() + (+) In case of transfer Error, HAL_SMARTCARD_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_SMARTCARD_ErrorCallback() + + *** SMARTCARD HAL driver macros list *** + ======================================== + [..] + Below the list of most used macros in SMARTCARD HAL driver. + + (+) __HAL_SMARTCARD_GET_FLAG : Check whether or not the specified SMARTCARD flag is set + (+) __HAL_SMARTCARD_CLEAR_FLAG : Clear the specified SMARTCARD pending flag + (+) __HAL_SMARTCARD_ENABLE_IT: Enable the specified SMARTCARD interrupt + (+) __HAL_SMARTCARD_DISABLE_IT: Disable the specified SMARTCARD interrupt + (+) __HAL_SMARTCARD_GET_IT_SOURCE: Check whether or not the specified SMARTCARD interrupt is enabled + + [..] + (@) You can refer to the SMARTCARD HAL driver header file for more useful macros + + ##### Callback registration ##### + ================================== + + [..] + The compilation define USE_HAL_SMARTCARD_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function @ref HAL_SMARTCARD_RegisterCallback() to register a user callback. + Function @ref HAL_SMARTCARD_RegisterCallback() allows to register following callbacks: + (+) TxCpltCallback : Tx Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) MspInitCallback : SMARTCARD MspInit. + (+) MspDeInitCallback : SMARTCARD MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + Use function @ref HAL_SMARTCARD_UnRegisterCallback() to reset a callback to the default + weak (surcharged) function. + @ref HAL_SMARTCARD_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxCpltCallback : Tx Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) MspInitCallback : SMARTCARD MspInit. + (+) MspDeInitCallback : SMARTCARD MspDeInit. + + [..] + By default, after the @ref HAL_SMARTCARD_Init() and when the state is HAL_SMARTCARD_STATE_RESET + all callbacks are set to the corresponding weak (surcharged) functions: + examples @ref HAL_SMARTCARD_TxCpltCallback(), @ref HAL_SMARTCARD_RxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are respectively + reset to the legacy weak (surcharged) functions in the @ref HAL_SMARTCARD_Init() + and @ref HAL_SMARTCARD_DeInit() only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the @ref HAL_SMARTCARD_Init() and @ref HAL_SMARTCARD_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + [..] + Callbacks can be registered/unregistered in HAL_SMARTCARD_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_SMARTCARD_STATE_READY or HAL_SMARTCARD_STATE_RESET state, thus registered (user) + MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using @ref HAL_SMARTCARD_RegisterCallback() before calling @ref HAL_SMARTCARD_DeInit() + or @ref HAL_SMARTCARD_Init() function. + + [..] + When The compilation define USE_HAL_SMARTCARD_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available + and weak (surcharged) callbacks are used. + + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @defgroup SMARTCARD SMARTCARD + * @brief HAL SMARTCARD module driver + * @{ + */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup SMARTCARD_Private_Constants SMARTCARD Private Constants + * @{ + */ +#define SMARTCARD_TEACK_REACK_TIMEOUT 1000U /*!< SMARTCARD TX or RX enable acknowledge time-out value */ + +#define USART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | \ + USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8)) /*!< USART CR1 fields of parameters set by SMARTCARD_SetConfig API */ + +#define USART_CR2_CLK_FIELDS ((uint32_t)(USART_CR2_CLKEN | USART_CR2_CPOL | USART_CR2_CPHA | \ + USART_CR2_LBCL)) /*!< SMARTCARD clock-related USART CR2 fields of parameters */ + +#define USART_CR2_FIELDS ((uint32_t)(USART_CR2_RTOEN | USART_CR2_CLK_FIELDS | USART_CR2_STOP)) /*!< USART CR2 fields of parameters set by SMARTCARD_SetConfig API */ + +#define USART_CR3_FIELDS ((uint32_t)(USART_CR3_ONEBIT | USART_CR3_NACK | USART_CR3_SCARCNT)) /*!< USART CR3 fields of parameters set by SMARTCARD_SetConfig API */ + +#define USART_BRR_MIN 0x10U /*!< USART BRR minimum authorized value */ + +#define USART_BRR_MAX 0x0000FFFFU /*!< USART BRR maximum authorized value */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup SMARTCARD_Private_Functions + * @{ + */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) +void SMARTCARD_InitCallbacksToDefault(SMARTCARD_HandleTypeDef *hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ +static HAL_StatusTypeDef SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsmartcard); +static void SMARTCARD_AdvFeatureConfig(SMARTCARD_HandleTypeDef *hsmartcard); +static HAL_StatusTypeDef SMARTCARD_CheckIdleState(SMARTCARD_HandleTypeDef *hsmartcard); +static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Flag, + FlagStatus Status, uint32_t Tickstart, uint32_t Timeout); +static void SMARTCARD_EndTxTransfer(SMARTCARD_HandleTypeDef *hsmartcard); +static void SMARTCARD_EndRxTransfer(SMARTCARD_HandleTypeDef *hsmartcard); +static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMAAbortOnError(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMATxAbortCallback(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMARxAbortCallback(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +static void SMARTCARD_TxISR(SMARTCARD_HandleTypeDef *hsmartcard); +static void SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard); +static void SMARTCARD_RxISR(SMARTCARD_HandleTypeDef *hsmartcard); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup SMARTCARD_Exported_Functions SMARTCARD Exported Functions + * @{ + */ + +/** @defgroup SMARTCARD_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and Configuration functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USARTx + associated to the SmartCard. + (+) These parameters can be configured: + (++) Baud Rate + (++) Parity: parity should be enabled, frame Length is fixed to 8 bits plus parity + (++) Receiver/transmitter modes + (++) Synchronous mode (and if enabled, phase, polarity and last bit parameters) + (++) Prescaler value + (++) Guard bit time + (++) NACK enabling or disabling on transmission error + + (+) The following advanced features can be configured as well: + (++) TX and/or RX pin level inversion + (++) data logical level inversion + (++) RX and TX pins swap + (++) RX overrun detection disabling + (++) DMA disabling on RX error + (++) MSB first on communication line + (++) Time out enabling (and if activated, timeout value) + (++) Block length + (++) Auto-retry counter + [..] + The HAL_SMARTCARD_Init() API follows the USART synchronous configuration procedures + (details for the procedures are available in reference manual). + +@endverbatim + + The USART frame format is given in the following table: + + Table 1. USART frame format. + +---------------------------------------------------------------+ + | M1M0 bits | PCE bit | USART frame | + |-----------------------|---------------------------------------| + | 01 | 1 | | SB | 8 bit data | PB | STB | | + +---------------------------------------------------------------+ + + + * @{ + */ + +/** + * @brief Initialize the SMARTCARD mode according to the specified + * parameters in the SMARTCARD_HandleTypeDef and initialize the associated handle. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Check the SMARTCARD handle allocation */ + if (hsmartcard == NULL) + { + return HAL_ERROR; + } + + /* Check the USART associated to the SMARTCARD handle */ + assert_param(IS_SMARTCARD_INSTANCE(hsmartcard->Instance)); + + if (hsmartcard->gState == HAL_SMARTCARD_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hsmartcard->Lock = HAL_UNLOCKED; + +#if USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1 + SMARTCARD_InitCallbacksToDefault(hsmartcard); + + if (hsmartcard->MspInitCallback == NULL) + { + hsmartcard->MspInitCallback = HAL_SMARTCARD_MspInit; + } + + /* Init the low level hardware */ + hsmartcard->MspInitCallback(hsmartcard); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_SMARTCARD_MspInit(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ + } + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; + + /* Disable the Peripheral to set smartcard mode */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* In SmartCard mode, the following bits must be kept cleared: + - LINEN in the USART_CR2 register, + - HDSEL and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(hsmartcard->Instance->CR2, USART_CR2_LINEN); + CLEAR_BIT(hsmartcard->Instance->CR3, (USART_CR3_HDSEL | USART_CR3_IREN)); + + /* set the USART in SMARTCARD mode */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_SCEN); + + /* Set the SMARTCARD Communication parameters */ + if (SMARTCARD_SetConfig(hsmartcard) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* Set the SMARTCARD transmission completion indication */ + SMARTCARD_TRANSMISSION_COMPLETION_SETTING(hsmartcard); + + if (hsmartcard->AdvancedInit.AdvFeatureInit != SMARTCARD_ADVFEATURE_NO_INIT) + { + SMARTCARD_AdvFeatureConfig(hsmartcard); + } + + /* Enable the Peripheral */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* TEACK and/or REACK to check before moving hsmartcard->gState and hsmartcard->RxState to Ready */ + return (SMARTCARD_CheckIdleState(hsmartcard)); +} + +/** + * @brief DeInitialize the SMARTCARD peripheral. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Check the SMARTCARD handle allocation */ + if (hsmartcard == NULL) + { + return HAL_ERROR; + } + + /* Check the USART/UART associated to the SMARTCARD handle */ + assert_param(IS_SMARTCARD_INSTANCE(hsmartcard->Instance)); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; + + /* Disable the Peripheral */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + WRITE_REG(hsmartcard->Instance->CR1, 0x0U); + WRITE_REG(hsmartcard->Instance->CR2, 0x0U); + WRITE_REG(hsmartcard->Instance->CR3, 0x0U); + WRITE_REG(hsmartcard->Instance->RTOR, 0x0U); + WRITE_REG(hsmartcard->Instance->GTPR, 0x0U); + + /* DeInit the low level hardware */ +#if USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1 + if (hsmartcard->MspDeInitCallback == NULL) + { + hsmartcard->MspDeInitCallback = HAL_SMARTCARD_MspDeInit; + } + /* DeInit the low level hardware */ + hsmartcard->MspDeInitCallback(hsmartcard); +#else + HAL_SMARTCARD_MspDeInit(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ + + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsmartcard->gState = HAL_SMARTCARD_STATE_RESET; + hsmartcard->RxState = HAL_SMARTCARD_STATE_RESET; + + /* Process Unlock */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; +} + +/** + * @brief Initialize the SMARTCARD MSP. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_MspInit can be implemented in the user file + */ +} + +/** + * @brief DeInitialize the SMARTCARD MSP. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_MspDeInit can be implemented in the user file + */ +} + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User SMARTCARD Callback + * To be used instead of the weak predefined callback + * @param hsmartcard smartcard handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_SMARTCARD_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_SMARTCARD_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_SMARTCARD_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_SMARTCARD_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_SMARTCARD_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_SMARTCARD_MSPDEINIT_CB_ID MspDeInit Callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_RegisterCallback(SMARTCARD_HandleTypeDef *hsmartcard, + HAL_SMARTCARD_CallbackIDTypeDef CallbackID, pSMARTCARD_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hsmartcard); + + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + switch (CallbackID) + { + + case HAL_SMARTCARD_TX_COMPLETE_CB_ID : + hsmartcard->TxCpltCallback = pCallback; + break; + + case HAL_SMARTCARD_RX_COMPLETE_CB_ID : + hsmartcard->RxCpltCallback = pCallback; + break; + + case HAL_SMARTCARD_ERROR_CB_ID : + hsmartcard->ErrorCallback = pCallback; + break; + + case HAL_SMARTCARD_ABORT_COMPLETE_CB_ID : + hsmartcard->AbortCpltCallback = pCallback; + break; + + case HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID : + hsmartcard->AbortTransmitCpltCallback = pCallback; + break; + + case HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID : + hsmartcard->AbortReceiveCpltCallback = pCallback; + break; + + + case HAL_SMARTCARD_MSPINIT_CB_ID : + hsmartcard->MspInitCallback = pCallback; + break; + + case HAL_SMARTCARD_MSPDEINIT_CB_ID : + hsmartcard->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hsmartcard->gState == HAL_SMARTCARD_STATE_RESET) + { + switch (CallbackID) + { + case HAL_SMARTCARD_MSPINIT_CB_ID : + hsmartcard->MspInitCallback = pCallback; + break; + + case HAL_SMARTCARD_MSPDEINIT_CB_ID : + hsmartcard->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hsmartcard); + + return status; +} + +/** + * @brief Unregister an SMARTCARD callback + * SMARTCARD callback is redirected to the weak predefined callback + * @param hsmartcard smartcard handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_SMARTCARD_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_SMARTCARD_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_SMARTCARD_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_SMARTCARD_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_SMARTCARD_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_SMARTCARD_MSPDEINIT_CB_ID MspDeInit Callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_UnRegisterCallback(SMARTCARD_HandleTypeDef *hsmartcard, + HAL_SMARTCARD_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hsmartcard); + + if (HAL_SMARTCARD_STATE_READY == hsmartcard->gState) + { + switch (CallbackID) + { + case HAL_SMARTCARD_TX_COMPLETE_CB_ID : + hsmartcard->TxCpltCallback = HAL_SMARTCARD_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_SMARTCARD_RX_COMPLETE_CB_ID : + hsmartcard->RxCpltCallback = HAL_SMARTCARD_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_SMARTCARD_ERROR_CB_ID : + hsmartcard->ErrorCallback = HAL_SMARTCARD_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_SMARTCARD_ABORT_COMPLETE_CB_ID : + hsmartcard->AbortCpltCallback = HAL_SMARTCARD_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID : + hsmartcard->AbortTransmitCpltCallback = HAL_SMARTCARD_AbortTransmitCpltCallback; /* Legacy weak AbortTransmitCpltCallback */ + break; + + case HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID : + hsmartcard->AbortReceiveCpltCallback = HAL_SMARTCARD_AbortReceiveCpltCallback; /* Legacy weak AbortReceiveCpltCallback */ + break; + + + case HAL_SMARTCARD_MSPINIT_CB_ID : + hsmartcard->MspInitCallback = HAL_SMARTCARD_MspInit; /* Legacy weak MspInitCallback */ + break; + + case HAL_SMARTCARD_MSPDEINIT_CB_ID : + hsmartcard->MspDeInitCallback = HAL_SMARTCARD_MspDeInit; /* Legacy weak MspDeInitCallback */ + break; + + default : + /* Update the error code */ + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_SMARTCARD_STATE_RESET == hsmartcard->gState) + { + switch (CallbackID) + { + case HAL_SMARTCARD_MSPINIT_CB_ID : + hsmartcard->MspInitCallback = HAL_SMARTCARD_MspInit; + break; + + case HAL_SMARTCARD_MSPDEINIT_CB_ID : + hsmartcard->MspDeInitCallback = HAL_SMARTCARD_MspDeInit; + break; + + default : + /* Update the error code */ + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hsmartcard); + + return status; +} +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup SMARTCARD_Exported_Functions_Group2 IO operation functions + * @brief SMARTCARD Transmit and Receive functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to manage the SMARTCARD data transfers. + + [..] + Smartcard is a single wire half duplex communication protocol. + The Smartcard interface is designed to support asynchronous protocol Smartcards as + defined in the ISO 7816-3 standard. The USART should be configured as: + (+) 8 bits plus parity: where M=1 and PCE=1 in the USART_CR1 register + (+) 1.5 stop bits when transmitting and receiving: where STOP=11 in the USART_CR2 register. + + [..] + (+) There are two modes of transfer: + (++) Blocking mode: The communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (++) Non-Blocking mode: The communication is performed using Interrupts + or DMA, the relevant API's return the HAL status. + The end of the data processing will be indicated through the + dedicated SMARTCARD IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + (++) The HAL_SMARTCARD_TxCpltCallback(), HAL_SMARTCARD_RxCpltCallback() user callbacks + will be executed respectively at the end of the Transmit or Receive process + The HAL_SMARTCARD_ErrorCallback() user callback will be executed when a communication + error is detected. + + (+) Blocking mode APIs are : + (++) HAL_SMARTCARD_Transmit() + (++) HAL_SMARTCARD_Receive() + + (+) Non Blocking mode APIs with Interrupt are : + (++) HAL_SMARTCARD_Transmit_IT() + (++) HAL_SMARTCARD_Receive_IT() + (++) HAL_SMARTCARD_IRQHandler() + + (+) Non Blocking mode functions with DMA are : + (++) HAL_SMARTCARD_Transmit_DMA() + (++) HAL_SMARTCARD_Receive_DMA() + + (+) A set of Transfer Complete Callbacks are provided in non Blocking mode: + (++) HAL_SMARTCARD_TxCpltCallback() + (++) HAL_SMARTCARD_RxCpltCallback() + (++) HAL_SMARTCARD_ErrorCallback() + + [..] + (#) Non-Blocking mode transfers could be aborted using Abort API's : + (++) HAL_SMARTCARD_Abort() + (++) HAL_SMARTCARD_AbortTransmit() + (++) HAL_SMARTCARD_AbortReceive() + (++) HAL_SMARTCARD_Abort_IT() + (++) HAL_SMARTCARD_AbortTransmit_IT() + (++) HAL_SMARTCARD_AbortReceive_IT() + + (#) For Abort services based on interrupts (HAL_SMARTCARD_Abortxxx_IT), a set of Abort Complete Callbacks are provided: + (++) HAL_SMARTCARD_AbortCpltCallback() + (++) HAL_SMARTCARD_AbortTransmitCpltCallback() + (++) HAL_SMARTCARD_AbortReceiveCpltCallback() + + (#) In Non-Blocking mode transfers, possible errors are split into 2 categories. + Errors are handled as follows : + (++) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is + to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error in Interrupt mode reception . + Received character is then retrieved and stored in Rx buffer, Error code is set to allow user to identify error type, + and HAL_SMARTCARD_ErrorCallback() user callback is executed. Transfer is kept ongoing on SMARTCARD side. + If user wants to abort it, Abort services should be called by user. + (++) Error is considered as Blocking : Transfer could not be completed properly and is aborted. + This concerns Frame Error in Interrupt mode tranmission, Overrun Error in Interrupt mode reception and all errors in DMA mode. + Error code is set to allow user to identify error type, and HAL_SMARTCARD_ErrorCallback() user callback is executed. + +@endverbatim + * @{ + */ + +/** + * @brief Send an amount of data in blocking mode. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param pData pointer to data buffer. + * @param Size amount of data to be sent. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, + uint32_t Timeout) +{ + uint32_t tickstart; + uint8_t *ptmpdata = pData; + + /* Check that a Tx process is not already ongoing */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + if ((ptmpdata == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY_TX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Disable the Peripheral first to update mode for TX master */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* Disable Rx, enable Tx */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RE); + SET_BIT(hsmartcard->Instance->RQR, (uint16_t)SMARTCARD_RXDATA_FLUSH_REQUEST); + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_TE); + + /* Enable the Peripheral */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsmartcard->TxXferSize = Size; + hsmartcard->TxXferCount = Size; + + while (hsmartcard->TxXferCount > 0U) + { + hsmartcard->TxXferCount--; + if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, SMARTCARD_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + hsmartcard->Instance->TDR = (uint8_t)(*ptmpdata & 0xFFU); + ptmpdata++; + } + if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, SMARTCARD_TRANSMISSION_COMPLETION_FLAG(hsmartcard), RESET, tickstart, + Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + /* Re-enable Rx at end of transmission if initial mode is Rx/Tx */ + if (hsmartcard->Init.Mode == SMARTCARD_MODE_TX_RX) + { + /* Disable the Peripheral first to update modes */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_RE); + /* Enable the Peripheral */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + } + + /* At end of Tx process, restore hsmartcard->gState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in blocking mode. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param pData pointer to data buffer. + * @param Size amount of data to be received. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, + uint32_t Timeout) +{ + uint32_t tickstart; + uint8_t *ptmpdata = pData; + + /* Check that a Rx process is not already ongoing */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY) + { + if ((ptmpdata == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsmartcard->RxState = HAL_SMARTCARD_STATE_BUSY_RX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + hsmartcard->RxXferSize = Size; + hsmartcard->RxXferCount = Size; + + /* Check the remain data to be received */ + while (hsmartcard->RxXferCount > 0U) + { + hsmartcard->RxXferCount--; + + if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, SMARTCARD_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + *ptmpdata = (uint8_t)(hsmartcard->Instance->RDR & (uint8_t)0x00FF); + ptmpdata++; + } + + /* At end of Rx process, restore hsmartcard->RxState to Ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in interrupt mode. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param pData pointer to data buffer. + * @param Size amount of data to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY_TX; + + hsmartcard->pTxBuffPtr = pData; + hsmartcard->TxXferSize = Size; + hsmartcard->TxXferCount = Size; + hsmartcard->TxISR = NULL; + + /* Disable the Peripheral first to update mode for TX master */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* Disable Rx, enable Tx */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RE); + SET_BIT(hsmartcard->Instance->RQR, (uint16_t)SMARTCARD_RXDATA_FLUSH_REQUEST); + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_TE); + + /* Enable the Peripheral */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* Configure Tx interrupt processing */ + /* Set the Tx ISR function pointer */ + hsmartcard->TxISR = SMARTCARD_TxISR; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Enable the SMARTCARD Error Interrupt: (Frame error) */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* Enable the SMARTCARD Transmit Data Register Empty Interrupt */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_TXEIE); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in interrupt mode. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param pData pointer to data buffer. + * @param Size amount of data to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsmartcard->RxState = HAL_SMARTCARD_STATE_BUSY_RX; + + hsmartcard->pRxBuffPtr = pData; + hsmartcard->RxXferSize = Size; + hsmartcard->RxXferCount = Size; + + /* Configure Rx interrupt processing */ + /* Set the Rx ISR function pointer */ + hsmartcard->RxISR = SMARTCARD_RxISR; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Enable the SMARTCARD Parity Error and Data Register not empty Interrupts */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE); + + /* Enable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in DMA mode. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param pData pointer to data buffer. + * @param Size amount of data to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY_TX; + + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsmartcard->pTxBuffPtr = pData; + hsmartcard->TxXferSize = Size; + hsmartcard->TxXferCount = Size; + + /* Disable the Peripheral first to update mode for TX master */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* Disable Rx, enable Tx */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RE); + SET_BIT(hsmartcard->Instance->RQR, (uint16_t)SMARTCARD_RXDATA_FLUSH_REQUEST); + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_TE); + + /* Enable the Peripheral */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* Set the SMARTCARD DMA transfer complete callback */ + hsmartcard->hdmatx->XferCpltCallback = SMARTCARD_DMATransmitCplt; + + /* Set the SMARTCARD error callback */ + hsmartcard->hdmatx->XferErrorCallback = SMARTCARD_DMAError; + + /* Set the DMA abort callback */ + hsmartcard->hdmatx->XferAbortCallback = NULL; + + /* Enable the SMARTCARD transmit DMA channel */ + if (HAL_DMA_Start_IT(hsmartcard->hdmatx, (uint32_t)hsmartcard->pTxBuffPtr, (uint32_t)&hsmartcard->Instance->TDR, + Size) == HAL_OK) + { + /* Clear the TC flag in the ICR register */ + CLEAR_BIT(hsmartcard->Instance->ICR, USART_ICR_TCCF); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Enable the UART Error Interrupt: (Frame error) */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the SMARTCARD associated USART CR3 register */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); + + return HAL_OK; + } + else + { + /* Set error code to DMA */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Restore hsmartcard->State to ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in DMA mode. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param pData pointer to data buffer. + * @param Size amount of data to be received. + * @note The SMARTCARD-associated USART parity is enabled (PCE = 1), + * the received data contain the parity bit (MSB position). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsmartcard->RxState = HAL_SMARTCARD_STATE_BUSY_RX; + + hsmartcard->pRxBuffPtr = pData; + hsmartcard->RxXferSize = Size; + + /* Set the SMARTCARD DMA transfer complete callback */ + hsmartcard->hdmarx->XferCpltCallback = SMARTCARD_DMAReceiveCplt; + + /* Set the SMARTCARD DMA error callback */ + hsmartcard->hdmarx->XferErrorCallback = SMARTCARD_DMAError; + + /* Set the DMA abort callback */ + hsmartcard->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(hsmartcard->hdmarx, (uint32_t)&hsmartcard->Instance->RDR, (uint32_t)hsmartcard->pRxBuffPtr, + Size) == HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Enable the SMARTCARD Parity Error Interrupt */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE); + + /* Enable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the SMARTCARD associated USART CR3 register */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); + + return HAL_OK; + } + else + { + /* Set error code to DMA */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Restore hsmartcard->State to ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Abort ongoing transfers (blocking mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SMARTCARD Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Abort(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable RTOIE, EOBIE, TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, + (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RTOIE | USART_CR1_EOBIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* Disable the SMARTCARD DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); + + /* Abort the SMARTCARD DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (hsmartcard->hdmatx != NULL) + { + /* Set the SMARTCARD DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + hsmartcard->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(hsmartcard->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(hsmartcard->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Disable the SMARTCARD DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); + + /* Abort the SMARTCARD DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (hsmartcard->hdmarx != NULL) + { + /* Set the SMARTCARD DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + hsmartcard->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(hsmartcard->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(hsmartcard->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Tx and Rx transfer counters */ + hsmartcard->TxXferCount = 0U; + hsmartcard->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | + SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->gState and hsmartcard->RxState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* Reset Handle ErrorCode to No Error */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (blocking mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SMARTCARD Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable TXEIE and TCIE interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); + + /* Check if a receive process is ongoing or not. If not disable ERR IT */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY) + { + /* Disable the SMARTCARD Error Interrupt: (Frame error) */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + } + + /* Disable the SMARTCARD DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); + + /* Abort the SMARTCARD DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (hsmartcard->hdmatx != NULL) + { + /* Set the SMARTCARD DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + hsmartcard->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(hsmartcard->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(hsmartcard->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Tx transfer counter */ + hsmartcard->TxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, SMARTCARD_CLEAR_FEF); + + /* Restore hsmartcard->gState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (blocking mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SMARTCARD Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable RTOIE, EOBIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_RTOIE | USART_CR1_EOBIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* Check if a Transmit process is ongoing or not. If not disable ERR IT */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + /* Disable the SMARTCARD Error Interrupt: (Frame error) */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + } + + /* Disable the SMARTCARD DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); + + /* Abort the SMARTCARD DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (hsmartcard->hdmarx != NULL) + { + /* Set the SMARTCARD DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + hsmartcard->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(hsmartcard->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(hsmartcard->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Rx transfer counter */ + hsmartcard->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | + SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->RxState to Ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (Interrupt mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SMARTCARD Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Abort_IT(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint32_t abortcplt = 1U; + + /* Disable RTOIE, EOBIE, TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, + (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RTOIE | USART_CR1_EOBIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* If DMA Tx and/or DMA Rx Handles are associated to SMARTCARD Handle, DMA Abort complete callbacks should be initialised + before any call to DMA Abort functions */ + /* DMA Tx Handle is valid */ + if (hsmartcard->hdmatx != NULL) + { + /* Set DMA Abort Complete callback if SMARTCARD DMA Tx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) + { + hsmartcard->hdmatx->XferAbortCallback = SMARTCARD_DMATxAbortCallback; + } + else + { + hsmartcard->hdmatx->XferAbortCallback = NULL; + } + } + /* DMA Rx Handle is valid */ + if (hsmartcard->hdmarx != NULL) + { + /* Set DMA Abort Complete callback if SMARTCARD DMA Rx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + { + hsmartcard->hdmarx->XferAbortCallback = SMARTCARD_DMARxAbortCallback; + } + else + { + hsmartcard->hdmarx->XferAbortCallback = NULL; + } + } + + /* Disable the SMARTCARD DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable DMA Tx at UART level */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); + + /* Abort the SMARTCARD DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (hsmartcard->hdmatx != NULL) + { + /* SMARTCARD Tx DMA Abort callback has already been initialised : + will lead to call HAL_SMARTCARD_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hsmartcard->hdmatx) != HAL_OK) + { + hsmartcard->hdmatx->XferAbortCallback = NULL; + } + else + { + abortcplt = 0U; + } + } + } + + /* Disable the SMARTCARD DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); + + /* Abort the SMARTCARD DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (hsmartcard->hdmarx != NULL) + { + /* SMARTCARD Rx DMA Abort callback has already been initialised : + will lead to call HAL_SMARTCARD_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hsmartcard->hdmarx) != HAL_OK) + { + hsmartcard->hdmarx->XferAbortCallback = NULL; + abortcplt = 1U; + } + else + { + abortcplt = 0U; + } + } + } + + /* if no DMA abort complete callback execution is required => call user Abort Complete callback */ + if (abortcplt == 1U) + { + /* Reset Tx and Rx transfer counters */ + hsmartcard->TxXferCount = 0U; + hsmartcard->RxXferCount = 0U; + + /* Clear ISR function pointers */ + hsmartcard->RxISR = NULL; + hsmartcard->TxISR = NULL; + + /* Reset errorCode */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | + SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->gState and hsmartcard->RxState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + hsmartcard->AbortCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort complete callback */ + HAL_SMARTCARD_AbortCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (Interrupt mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SMARTCARD Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable TXEIE and TCIE interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); + + /* Check if a receive process is ongoing or not. If not disable ERR IT */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY) + { + /* Disable the SMARTCARD Error Interrupt: (Frame error) */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + } + + /* Disable the SMARTCARD DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); + + /* Abort the SMARTCARD DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (hsmartcard->hdmatx != NULL) + { + /* Set the SMARTCARD DMA Abort callback : + will lead to call HAL_SMARTCARD_AbortCpltCallback() at end of DMA abort procedure */ + hsmartcard->hdmatx->XferAbortCallback = SMARTCARD_DMATxOnlyAbortCallback; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hsmartcard->hdmatx) != HAL_OK) + { + /* Call Directly hsmartcard->hdmatx->XferAbortCallback function in case of error */ + hsmartcard->hdmatx->XferAbortCallback(hsmartcard->hdmatx); + } + } + else + { + /* Reset Tx transfer counter */ + hsmartcard->TxXferCount = 0U; + + /* Clear TxISR function pointers */ + hsmartcard->TxISR = NULL; + + /* Restore hsmartcard->gState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + hsmartcard->AbortTransmitCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_SMARTCARD_AbortTransmitCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + else + { + /* Reset Tx transfer counter */ + hsmartcard->TxXferCount = 0U; + + /* Clear TxISR function pointers */ + hsmartcard->TxISR = NULL; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, SMARTCARD_CLEAR_FEF); + + /* Restore hsmartcard->gState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + hsmartcard->AbortTransmitCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_SMARTCARD_AbortTransmitCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (Interrupt mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SMARTCARD Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive_IT(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable RTOIE, EOBIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_RTOIE | USART_CR1_EOBIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* Check if a Transmit process is ongoing or not. If not disable ERR IT */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + /* Disable the SMARTCARD Error Interrupt: (Frame error) */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + } + + /* Disable the SMARTCARD DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); + + /* Abort the SMARTCARD DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (hsmartcard->hdmarx != NULL) + { + /* Set the SMARTCARD DMA Abort callback : + will lead to call HAL_SMARTCARD_AbortCpltCallback() at end of DMA abort procedure */ + hsmartcard->hdmarx->XferAbortCallback = SMARTCARD_DMARxOnlyAbortCallback; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hsmartcard->hdmarx) != HAL_OK) + { + /* Call Directly hsmartcard->hdmarx->XferAbortCallback function in case of error */ + hsmartcard->hdmarx->XferAbortCallback(hsmartcard->hdmarx); + } + } + else + { + /* Reset Rx transfer counter */ + hsmartcard->RxXferCount = 0U; + + /* Clear RxISR function pointer */ + hsmartcard->RxISR = NULL; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | + SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->RxState to Ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + hsmartcard->AbortReceiveCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_SMARTCARD_AbortReceiveCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + else + { + /* Reset Rx transfer counter */ + hsmartcard->RxXferCount = 0U; + + /* Clear RxISR function pointer */ + hsmartcard->RxISR = NULL; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | + SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->RxState to Ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + hsmartcard->AbortReceiveCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_SMARTCARD_AbortReceiveCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + + return HAL_OK; +} + +/** + * @brief Handle SMARTCARD interrupt requests. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint32_t isrflags = READ_REG(hsmartcard->Instance->ISR); + uint32_t cr1its = READ_REG(hsmartcard->Instance->CR1); + uint32_t cr3its = READ_REG(hsmartcard->Instance->CR3); + uint32_t errorflags; + uint32_t errorcode; + + /* If no error occurs */ + errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE | USART_ISR_RTOF)); + if (errorflags == 0U) + { + /* SMARTCARD in mode Receiver ---------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE) != 0U) + && ((cr1its & USART_CR1_RXNEIE) != 0U)) + { + if (hsmartcard->RxISR != NULL) + { + hsmartcard->RxISR(hsmartcard); + } + return; + } + } + + /* If some errors occur */ + if ((errorflags != 0U) + && (((cr3its & USART_CR3_EIE) != 0U) + || ((cr1its & (USART_CR1_RXNEIE | USART_CR1_PEIE)) != 0U))) + { + /* SMARTCARD parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_PEF); + + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_PE; + } + + /* SMARTCARD frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_FEF); + + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_FE; + } + + /* SMARTCARD noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_NEF); + + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_NE; + } + + /* SMARTCARD Over-Run interrupt occurred -----------------------------------------*/ + if (((isrflags & USART_ISR_ORE) != 0U) + && (((cr1its & USART_CR1_RXNEIE) != 0U) + || ((cr3its & USART_CR3_EIE) != 0U))) + { + __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_OREF); + + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_ORE; + } + + /* SMARTCARD receiver timeout interrupt occurred -----------------------------------------*/ + if (((isrflags & USART_ISR_RTOF) != 0U) && ((cr1its & USART_CR1_RTOIE) != 0U)) + { + __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_RTOF); + + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_RTO; + } + + /* Call SMARTCARD Error Call back function if need be --------------------------*/ + if (hsmartcard->ErrorCode != HAL_SMARTCARD_ERROR_NONE) + { + /* SMARTCARD in mode Receiver ---------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE) != 0U) + && ((cr1its & USART_CR1_RXNEIE) != 0U)) + { + if (hsmartcard->RxISR != NULL) + { + hsmartcard->RxISR(hsmartcard); + } + } + + /* If Error is to be considered as blocking : + - Receiver Timeout error in Reception + - Overrun error in Reception + - any error occurs in DMA mode reception + */ + errorcode = hsmartcard->ErrorCode; + if ((HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + || ((errorcode & (HAL_SMARTCARD_ERROR_RTO | HAL_SMARTCARD_ERROR_ORE)) != 0U)) + { + /* Blocking error : transfer is aborted + Set the SMARTCARD state ready to be able to start again the process, + Disable Rx Interrupts, and disable Rx DMA request, if ongoing */ + SMARTCARD_EndRxTransfer(hsmartcard); + + /* Disable the SMARTCARD DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); + + /* Abort the SMARTCARD DMA Rx channel */ + if (hsmartcard->hdmarx != NULL) + { + /* Set the SMARTCARD DMA Abort callback : + will lead to call HAL_SMARTCARD_ErrorCallback() at end of DMA abort procedure */ + hsmartcard->hdmarx->XferAbortCallback = SMARTCARD_DMAAbortOnError; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hsmartcard->hdmarx) != HAL_OK) + { + /* Call Directly hsmartcard->hdmarx->XferAbortCallback function in case of error */ + hsmartcard->hdmarx->XferAbortCallback(hsmartcard->hdmarx); + } + } + else + { +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hsmartcard->ErrorCallback(hsmartcard); +#else + /* Call legacy weak user error callback */ + HAL_SMARTCARD_ErrorCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + else + { +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hsmartcard->ErrorCallback(hsmartcard); +#else + /* Call legacy weak user error callback */ + HAL_SMARTCARD_ErrorCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + /* other error type to be considered as blocking : + - Frame error in Transmission + */ + else if ((hsmartcard->gState == HAL_SMARTCARD_STATE_BUSY_TX) + && ((errorcode & HAL_SMARTCARD_ERROR_FE) != 0U)) + { + /* Blocking error : transfer is aborted + Set the SMARTCARD state ready to be able to start again the process, + Disable Tx Interrupts, and disable Tx DMA request, if ongoing */ + SMARTCARD_EndTxTransfer(hsmartcard); + + /* Disable the SMARTCARD DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); + + /* Abort the SMARTCARD DMA Tx channel */ + if (hsmartcard->hdmatx != NULL) + { + /* Set the SMARTCARD DMA Abort callback : + will lead to call HAL_SMARTCARD_ErrorCallback() at end of DMA abort procedure */ + hsmartcard->hdmatx->XferAbortCallback = SMARTCARD_DMAAbortOnError; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hsmartcard->hdmatx) != HAL_OK) + { + /* Call Directly hsmartcard->hdmatx->XferAbortCallback function in case of error */ + hsmartcard->hdmatx->XferAbortCallback(hsmartcard->hdmatx); + } + } + else + { +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hsmartcard->ErrorCallback(hsmartcard); +#else + /* Call legacy weak user error callback */ + HAL_SMARTCARD_ErrorCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + else + { +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hsmartcard->ErrorCallback(hsmartcard); +#else + /* Call legacy weak user error callback */ + HAL_SMARTCARD_ErrorCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + else + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hsmartcard->ErrorCallback(hsmartcard); +#else + /* Call legacy weak user error callback */ + HAL_SMARTCARD_ErrorCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + } + } + return; + + } /* End if some error occurs */ + + /* SMARTCARD in mode Receiver, end of block interruption ------------------------*/ + if (((isrflags & USART_ISR_EOBF) != 0U) && ((cr1its & USART_CR1_EOBIE) != 0U)) + { + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + __HAL_UNLOCK(hsmartcard); +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Rx complete callback */ + hsmartcard->RxCpltCallback(hsmartcard); +#else + /* Call legacy weak Rx complete callback */ + HAL_SMARTCARD_RxCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + /* Clear EOBF interrupt after HAL_SMARTCARD_RxCpltCallback() call for the End of Block information + to be available during HAL_SMARTCARD_RxCpltCallback() processing */ + __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_EOBF); + return; + } + + /* SMARTCARD in mode Transmitter ------------------------------------------------*/ + if (((isrflags & USART_ISR_TXE) != 0U) + && ((cr1its & USART_CR1_TXEIE) != 0U)) + { + if (hsmartcard->TxISR != NULL) + { + hsmartcard->TxISR(hsmartcard); + } + return; + } + + /* SMARTCARD in mode Transmitter (transmission end) ------------------------*/ + if (__HAL_SMARTCARD_GET_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication) != RESET) + { + if (__HAL_SMARTCARD_GET_IT_SOURCE(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication) != RESET) + { + SMARTCARD_EndTransmit_IT(hsmartcard); + return; + } + } + +} + +/** + * @brief Tx Transfer completed callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_TxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_RxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief SMARTCARD error callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_ErrorCallback can be implemented in the user file. + */ +} + +/** + * @brief SMARTCARD Abort Complete callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_AbortCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_AbortCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief SMARTCARD Abort Complete callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_AbortTransmitCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_AbortTransmitCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief SMARTCARD Abort Receive Complete callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_AbortReceiveCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_AbortReceiveCpltCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup SMARTCARD_Exported_Functions_Group4 Peripheral State and Errors functions + * @brief SMARTCARD State and Errors functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Errors functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to return the State of SmartCard + handle and also return Peripheral Errors occurred during communication process + (+) HAL_SMARTCARD_GetState() API can be helpful to check in run-time the state + of the SMARTCARD peripheral. + (+) HAL_SMARTCARD_GetError() checks in run-time errors that could occur during + communication. + +@endverbatim + * @{ + */ + +/** + * @brief Return the SMARTCARD handle state. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval SMARTCARD handle state + */ +HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Return SMARTCARD handle state */ + uint32_t temp1; + uint32_t temp2; + temp1 = (uint32_t)hsmartcard->gState; + temp2 = (uint32_t)hsmartcard->RxState; + + return (HAL_SMARTCARD_StateTypeDef)(temp1 | temp2); +} + +/** + * @brief Return the SMARTCARD handle error code. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval SMARTCARD handle Error Code + */ +uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsmartcard) +{ + return hsmartcard->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup SMARTCARD_Private_Functions SMARTCARD Private Functions + * @{ + */ + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) +/** + * @brief Initialize the callbacks to their default values. + * @param hsmartcard SMARTCARD handle. + * @retval none + */ +void SMARTCARD_InitCallbacksToDefault(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Init the SMARTCARD Callback settings */ + hsmartcard->TxCpltCallback = HAL_SMARTCARD_TxCpltCallback; /* Legacy weak TxCpltCallback */ + hsmartcard->RxCpltCallback = HAL_SMARTCARD_RxCpltCallback; /* Legacy weak RxCpltCallback */ + hsmartcard->ErrorCallback = HAL_SMARTCARD_ErrorCallback; /* Legacy weak ErrorCallback */ + hsmartcard->AbortCpltCallback = HAL_SMARTCARD_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + hsmartcard->AbortTransmitCpltCallback = HAL_SMARTCARD_AbortTransmitCpltCallback; /* Legacy weak AbortTransmitCpltCallback */ + hsmartcard->AbortReceiveCpltCallback = HAL_SMARTCARD_AbortReceiveCpltCallback; /* Legacy weak AbortReceiveCpltCallback */ + +} +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ + +/** + * @brief Configure the SMARTCARD associated USART peripheral. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval HAL status + */ +static HAL_StatusTypeDef SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint32_t tmpreg; + SMARTCARD_ClockSourceTypeDef clocksource; + HAL_StatusTypeDef ret = HAL_OK; + uint32_t pclk; + + /* Check the parameters */ + assert_param(IS_SMARTCARD_INSTANCE(hsmartcard->Instance)); + assert_param(IS_SMARTCARD_BAUDRATE(hsmartcard->Init.BaudRate)); + assert_param(IS_SMARTCARD_WORD_LENGTH(hsmartcard->Init.WordLength)); + assert_param(IS_SMARTCARD_STOPBITS(hsmartcard->Init.StopBits)); + assert_param(IS_SMARTCARD_PARITY(hsmartcard->Init.Parity)); + assert_param(IS_SMARTCARD_MODE(hsmartcard->Init.Mode)); + assert_param(IS_SMARTCARD_POLARITY(hsmartcard->Init.CLKPolarity)); + assert_param(IS_SMARTCARD_PHASE(hsmartcard->Init.CLKPhase)); + assert_param(IS_SMARTCARD_LASTBIT(hsmartcard->Init.CLKLastBit)); + assert_param(IS_SMARTCARD_ONE_BIT_SAMPLE(hsmartcard->Init.OneBitSampling)); + assert_param(IS_SMARTCARD_NACK(hsmartcard->Init.NACKEnable)); + assert_param(IS_SMARTCARD_TIMEOUT(hsmartcard->Init.TimeOutEnable)); + assert_param(IS_SMARTCARD_AUTORETRY_COUNT(hsmartcard->Init.AutoRetryCount)); + + /*-------------------------- USART CR1 Configuration -----------------------*/ + /* In SmartCard mode, M and PCE are forced to 1 (8 bits + parity). + * Oversampling is forced to 16 (OVER8 = 0). + * Configure the Parity and Mode: + * set PS bit according to hsmartcard->Init.Parity value + * set TE and RE bits according to hsmartcard->Init.Mode value */ + tmpreg = (uint32_t)(hsmartcard->Init.Parity | hsmartcard->Init.Mode | hsmartcard->Init.WordLength); + MODIFY_REG(hsmartcard->Instance->CR1, USART_CR1_FIELDS, tmpreg); + + /*-------------------------- USART CR2 Configuration -----------------------*/ + tmpreg = hsmartcard->Init.StopBits; + /* Synchronous mode is activated by default */ + tmpreg |= (uint32_t) USART_CR2_CLKEN | hsmartcard->Init.CLKPolarity; + tmpreg |= (uint32_t) hsmartcard->Init.CLKPhase | hsmartcard->Init.CLKLastBit; + tmpreg |= (uint32_t) hsmartcard->Init.TimeOutEnable; + MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_FIELDS, tmpreg); + + /*-------------------------- USART CR3 Configuration -----------------------*/ + /* Configure + * - one-bit sampling method versus three samples' majority rule + * according to hsmartcard->Init.OneBitSampling + * - NACK transmission in case of parity error according + * to hsmartcard->Init.NACKEnable + * - autoretry counter according to hsmartcard->Init.AutoRetryCount */ + + tmpreg = (uint32_t) hsmartcard->Init.OneBitSampling | hsmartcard->Init.NACKEnable; + tmpreg |= ((uint32_t)hsmartcard->Init.AutoRetryCount << USART_CR3_SCARCNT_Pos); + MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_FIELDS, tmpreg); + + + /*-------------------------- USART GTPR Configuration ----------------------*/ + tmpreg = (hsmartcard->Init.Prescaler | ((uint32_t)hsmartcard->Init.GuardTime << USART_GTPR_GT_Pos)); + MODIFY_REG(hsmartcard->Instance->GTPR, (uint16_t)(USART_GTPR_GT | USART_GTPR_PSC), (uint16_t)tmpreg); + + /*-------------------------- USART RTOR Configuration ----------------------*/ + tmpreg = ((uint32_t)hsmartcard->Init.BlockLength << USART_RTOR_BLEN_Pos); + if (hsmartcard->Init.TimeOutEnable == SMARTCARD_TIMEOUT_ENABLE) + { + assert_param(IS_SMARTCARD_TIMEOUT_VALUE(hsmartcard->Init.TimeOutValue)); + tmpreg |= (uint32_t) hsmartcard->Init.TimeOutValue; + } + MODIFY_REG(hsmartcard->Instance->RTOR, (USART_RTOR_RTO | USART_RTOR_BLEN), tmpreg); + + /*-------------------------- USART BRR Configuration -----------------------*/ + SMARTCARD_GETCLOCKSOURCE(hsmartcard, clocksource); + tmpreg = 0U; + switch (clocksource) + { + case SMARTCARD_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + tmpreg = (uint16_t)((pclk + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate); + break; + case SMARTCARD_CLOCKSOURCE_HSI: + tmpreg = (uint16_t)((HSI_VALUE + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate); + break; + case SMARTCARD_CLOCKSOURCE_SYSCLK: + pclk = HAL_RCC_GetSysClockFreq(); + tmpreg = (uint16_t)((pclk + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate); + break; + case SMARTCARD_CLOCKSOURCE_LSE: + tmpreg = (uint16_t)((LSE_VALUE + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate); + break; + default: + ret = HAL_ERROR; + break; + } + + /* USARTDIV must be greater than or equal to 0d16 */ + if ((tmpreg >= USART_BRR_MIN) && (tmpreg <= USART_BRR_MAX)) + { + hsmartcard->Instance->BRR = tmpreg; + } + else + { + ret = HAL_ERROR; + } + + + /* Clear ISR function pointers */ + hsmartcard->RxISR = NULL; + hsmartcard->TxISR = NULL; + + return ret; +} + + +/** + * @brief Configure the SMARTCARD associated USART peripheral advanced features. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_AdvFeatureConfig(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Check whether the set of advanced features to configure is properly set */ + assert_param(IS_SMARTCARD_ADVFEATURE_INIT(hsmartcard->AdvancedInit.AdvFeatureInit)); + + /* if required, configure TX pin active level inversion */ + if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_TXINVERT_INIT)) + { + assert_param(IS_SMARTCARD_ADVFEATURE_TXINV(hsmartcard->AdvancedInit.TxPinLevelInvert)); + MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_TXINV, hsmartcard->AdvancedInit.TxPinLevelInvert); + } + + /* if required, configure RX pin active level inversion */ + if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_RXINVERT_INIT)) + { + assert_param(IS_SMARTCARD_ADVFEATURE_RXINV(hsmartcard->AdvancedInit.RxPinLevelInvert)); + MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_RXINV, hsmartcard->AdvancedInit.RxPinLevelInvert); + } + + /* if required, configure data inversion */ + if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_DATAINVERT_INIT)) + { + assert_param(IS_SMARTCARD_ADVFEATURE_DATAINV(hsmartcard->AdvancedInit.DataInvert)); + MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_DATAINV, hsmartcard->AdvancedInit.DataInvert); + } + + /* if required, configure RX/TX pins swap */ + if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_SWAP_INIT)) + { + assert_param(IS_SMARTCARD_ADVFEATURE_SWAP(hsmartcard->AdvancedInit.Swap)); + MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_SWAP, hsmartcard->AdvancedInit.Swap); + } + + /* if required, configure RX overrun detection disabling */ + if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT)) + { + assert_param(IS_SMARTCARD_OVERRUN(hsmartcard->AdvancedInit.OverrunDisable)); + MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_OVRDIS, hsmartcard->AdvancedInit.OverrunDisable); + } + + /* if required, configure DMA disabling on reception error */ + if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT)) + { + assert_param(IS_SMARTCARD_ADVFEATURE_DMAONRXERROR(hsmartcard->AdvancedInit.DMADisableonRxError)); + MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_DDRE, hsmartcard->AdvancedInit.DMADisableonRxError); + } + + /* if required, configure MSB first on communication line */ + if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_MSBFIRST_INIT)) + { + assert_param(IS_SMARTCARD_ADVFEATURE_MSBFIRST(hsmartcard->AdvancedInit.MSBFirst)); + MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_MSBFIRST, hsmartcard->AdvancedInit.MSBFirst); + } + +} + +/** + * @brief Check the SMARTCARD Idle State. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval HAL status + */ +static HAL_StatusTypeDef SMARTCARD_CheckIdleState(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint32_t tickstart; + + /* Initialize the SMARTCARD ErrorCode */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Check if the Transmitter is enabled */ + if ((hsmartcard->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE) + { + /* Wait until TEACK flag is set */ + if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, USART_ISR_TEACK, RESET, tickstart, + SMARTCARD_TEACK_REACK_TIMEOUT) != HAL_OK) + { + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + /* Check if the Receiver is enabled */ + if ((hsmartcard->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE) + { + /* Wait until REACK flag is set */ + if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, USART_ISR_REACK, RESET, tickstart, + SMARTCARD_TEACK_REACK_TIMEOUT) != HAL_OK) + { + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + + /* Initialize the SMARTCARD states */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; +} + +/** + * @brief Handle SMARTCARD Communication Timeout. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param Flag Specifies the SMARTCARD flag to check. + * @param Status The new Flag status (SET or RESET). + * @param Tickstart Tick start value + * @param Timeout Timeout duration. + * @retval HAL status + */ +static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Flag, + FlagStatus Status, uint32_t Tickstart, uint32_t Timeout) +{ + /* Wait until flag is set */ + while ((__HAL_SMARTCARD_GET_FLAG(hsmartcard, Flag) ? SET : RESET) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ + CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + return HAL_TIMEOUT; + } + } + } + return HAL_OK; +} + + +/** + * @brief End ongoing Tx transfer on SMARTCARD peripheral (following error detection or Transmit completion). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_EndTxTransfer(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable TXEIE, TCIE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* At end of Tx process, restore hsmartcard->gState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; +} + + +/** + * @brief End ongoing Rx transfer on UART peripheral (following error detection or Reception completion). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_EndRxTransfer(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* At end of Rx process, restore hsmartcard->RxState to Ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; +} + + +/** + * @brief DMA SMARTCARD transmit process complete callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + hsmartcard->TxXferCount = 0U; + + /* Disable the DMA transfer for transmit request by resetting the DMAT bit + in the SMARTCARD associated USART CR3 register */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); + + /* Enable the SMARTCARD Transmit Complete Interrupt */ + __HAL_SMARTCARD_ENABLE_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication); +} + +/** + * @brief DMA SMARTCARD receive process complete callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + hsmartcard->RxXferCount = 0U; + + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA transfer for the receiver request by resetting the DMAR bit + in the SMARTCARD associated USART CR3 register */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); + + /* At end of Rx process, restore hsmartcard->RxState to Ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Rx complete callback */ + hsmartcard->RxCpltCallback(hsmartcard); +#else + /* Call legacy weak Rx complete callback */ + HAL_SMARTCARD_RxCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + +/** + * @brief DMA SMARTCARD communication error callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + + /* Stop SMARTCARD DMA Tx request if ongoing */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_BUSY_TX) + { + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) + { + hsmartcard->TxXferCount = 0U; + SMARTCARD_EndTxTransfer(hsmartcard); + } + } + + /* Stop SMARTCARD DMA Rx request if ongoing */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_BUSY_RX) + { + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + { + hsmartcard->RxXferCount = 0U; + SMARTCARD_EndRxTransfer(hsmartcard); + } + } + + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_DMA; +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hsmartcard->ErrorCallback(hsmartcard); +#else + /* Call legacy weak user error callback */ + HAL_SMARTCARD_ErrorCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + +/** + * @brief DMA SMARTCARD communication abort callback, when initiated by HAL services on Error + * (To be called at end of DMA Abort procedure following error occurrence). + * @param hdma DMA handle. + * @retval None + */ +static void SMARTCARD_DMAAbortOnError(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + hsmartcard->RxXferCount = 0U; + hsmartcard->TxXferCount = 0U; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hsmartcard->ErrorCallback(hsmartcard); +#else + /* Call legacy weak user error callback */ + HAL_SMARTCARD_ErrorCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + +/** + * @brief DMA SMARTCARD Tx communication abort callback, when initiated by user + * (To be called at end of DMA Tx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Rx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void SMARTCARD_DMATxAbortCallback(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + + hsmartcard->hdmatx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (hsmartcard->hdmarx != NULL) + { + if (hsmartcard->hdmarx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + hsmartcard->TxXferCount = 0U; + hsmartcard->RxXferCount = 0U; + + /* Reset errorCode */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | + SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->gState and hsmartcard->RxState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + hsmartcard->AbortCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort complete callback */ + HAL_SMARTCARD_AbortCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + + +/** + * @brief DMA SMARTCARD Rx communication abort callback, when initiated by user + * (To be called at end of DMA Rx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Tx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void SMARTCARD_DMARxAbortCallback(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + + hsmartcard->hdmarx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (hsmartcard->hdmatx != NULL) + { + if (hsmartcard->hdmatx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + hsmartcard->TxXferCount = 0U; + hsmartcard->RxXferCount = 0U; + + /* Reset errorCode */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | + SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->gState and hsmartcard->RxState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + hsmartcard->AbortCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort complete callback */ + HAL_SMARTCARD_AbortCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + + +/** + * @brief DMA SMARTCARD Tx communication abort callback, when initiated by user by a call to + * HAL_SMARTCARD_AbortTransmit_IT API (Abort only Tx transfer) + * (This callback is executed at end of DMA Tx Abort procedure following user abort request, + * and leads to user Tx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void SMARTCARD_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + + hsmartcard->TxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, SMARTCARD_CLEAR_FEF); + + /* Restore hsmartcard->gState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + hsmartcard->AbortTransmitCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_SMARTCARD_AbortTransmitCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + +/** + * @brief DMA SMARTCARD Rx communication abort callback, when initiated by user by a call to + * HAL_SMARTCARD_AbortReceive_IT API (Abort only Rx transfer) + * (This callback is executed at end of DMA Rx Abort procedure following user abort request, + * and leads to user Rx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void SMARTCARD_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + + hsmartcard->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | + SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->RxState to Ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + hsmartcard->AbortReceiveCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_SMARTCARD_AbortReceiveCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + +/** + * @brief Send an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_SMARTCARD_Transmit_IT(). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_TxISR(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Check that a Tx process is ongoing */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_BUSY_TX) + { + if (hsmartcard->TxXferCount == 0U) + { + /* Disable the SMARTCARD Transmit Data Register Empty Interrupt */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_TXEIE); + + /* Enable the SMARTCARD Transmit Complete Interrupt */ + __HAL_SMARTCARD_ENABLE_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication); + } + else + { + hsmartcard->Instance->TDR = (uint8_t)(*hsmartcard->pTxBuffPtr & 0xFFU); + hsmartcard->pTxBuffPtr++; + hsmartcard->TxXferCount--; + } + } +} + +/** + * @brief Wrap up transmission in non-blocking mode. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable the SMARTCARD Transmit Complete Interrupt */ + __HAL_SMARTCARD_DISABLE_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication); + + /* Check if a receive process is ongoing or not. If not disable ERR IT */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY) + { + /* Disable the SMARTCARD Error Interrupt: (Frame error) */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + } + + /* Re-enable Rx at end of transmission if initial mode is Rx/Tx */ + if (hsmartcard->Init.Mode == SMARTCARD_MODE_TX_RX) + { + /* Disable the Peripheral first to update modes */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_RE); + /* Enable the Peripheral */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + } + + /* Tx process is ended, restore hsmartcard->gState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* Clear TxISR function pointer */ + hsmartcard->TxISR = NULL; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Tx complete callback */ + hsmartcard->TxCpltCallback(hsmartcard); +#else + /* Call legacy weak Tx complete callback */ + HAL_SMARTCARD_TxCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + +/** + * @brief Receive an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_SMARTCARD_Receive_IT(). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_RxISR(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Check that a Rx process is ongoing */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_BUSY_RX) + { + *hsmartcard->pRxBuffPtr = (uint8_t)(hsmartcard->Instance->RDR & (uint8_t)0xFF); + hsmartcard->pRxBuffPtr++; + + hsmartcard->RxXferCount--; + if (hsmartcard->RxXferCount == 0U) + { + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RXNEIE); + + /* Check if a transmit process is ongoing or not. If not disable ERR IT */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + /* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + } + + /* Disable the SMARTCARD Parity Error Interrupt */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE); + + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* Clear RxISR function pointer */ + hsmartcard->RxISR = NULL; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Rx complete callback */ + hsmartcard->RxCpltCallback(hsmartcard); +#else + /* Call legacy weak Rx complete callback */ + HAL_SMARTCARD_RxCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_SMARTCARD_SEND_REQ(hsmartcard, SMARTCARD_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @} + */ + +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit