From 94f94260ace13688285fc8c62687079b26c18854 Mon Sep 17 00:00:00 2001 From: jaseg Date: Sun, 20 Dec 2020 15:18:02 +0100 Subject: Submodule-cache WIP --- .../STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_irda.c | 2991 -------------------- 1 file changed, 2991 deletions(-) delete mode 100644 fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_irda.c (limited to 'fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_irda.c') diff --git a/fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_irda.c b/fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_irda.c deleted file mode 100644 index 2f1f23f..0000000 --- a/fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_irda.c +++ /dev/null @@ -1,2991 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f0xx_hal_irda.c - * @author MCD Application Team - * @brief IRDA HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the IrDA (Infrared Data Association) Peripheral - * (IRDA) - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral State and Errors functions - * + Peripheral Control functions - * - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The IRDA HAL driver can be used as follows: - - (#) Declare a IRDA_HandleTypeDef handle structure (eg. IRDA_HandleTypeDef hirda). - (#) Initialize the IRDA low level resources by implementing the HAL_IRDA_MspInit() API - in setting the associated USART or UART in IRDA mode: - (++) Enable the USARTx/UARTx interface clock. - (++) USARTx/UARTx pins configuration: - (+++) Enable the clock for the USARTx/UARTx GPIOs. - (+++) Configure these USARTx/UARTx pins (TX as alternate function pull-up, RX as alternate function Input). - (++) NVIC configuration if you need to use interrupt process (HAL_IRDA_Transmit_IT() - and HAL_IRDA_Receive_IT() APIs): - (+++) Configure the USARTx/UARTx interrupt priority. - (+++) Enable the NVIC USARTx/UARTx IRQ handle. - (+++) The specific IRDA interrupts (Transmission complete interrupt, - RXNE interrupt and Error Interrupts) will be managed using the macros - __HAL_IRDA_ENABLE_IT() and __HAL_IRDA_DISABLE_IT() inside the transmit and receive process. - - (++) DMA Configuration if you need to use DMA process (HAL_IRDA_Transmit_DMA() - and HAL_IRDA_Receive_DMA() APIs): - (+++) Declare a DMA handle structure for the Tx/Rx channel. - (+++) Enable the DMAx interface clock. - (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. - (+++) Configure the DMA Tx/Rx channel. - (+++) Associate the initialized DMA handle to the IRDA DMA Tx/Rx handle. - (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx channel. - - (#) Program the Baud Rate, Word Length and Parity and Mode(Receiver/Transmitter), - the normal or low power mode and the clock prescaler in the hirda handle Init structure. - - (#) Initialize the IRDA registers by calling the HAL_IRDA_Init() API: - (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) - by calling the customized HAL_IRDA_MspInit() API. - - -@@- The specific IRDA interrupts (Transmission complete interrupt, - RXNE interrupt and Error Interrupts) will be managed using the macros - __HAL_IRDA_ENABLE_IT() and __HAL_IRDA_DISABLE_IT() inside the transmit and receive process. - - (#) Three operation modes are available within this driver : - - *** Polling mode IO operation *** - ================================= - [..] - (+) Send an amount of data in blocking mode using HAL_IRDA_Transmit() - (+) Receive an amount of data in blocking mode using HAL_IRDA_Receive() - - *** Interrupt mode IO operation *** - =================================== - [..] - (+) Send an amount of data in non-blocking mode using HAL_IRDA_Transmit_IT() - (+) At transmission end of transfer HAL_IRDA_TxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_IRDA_TxCpltCallback() - (+) Receive an amount of data in non-blocking mode using HAL_IRDA_Receive_IT() - (+) At reception end of transfer HAL_IRDA_RxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_IRDA_RxCpltCallback() - (+) In case of transfer Error, HAL_IRDA_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_IRDA_ErrorCallback() - - *** DMA mode IO operation *** - ============================== - [..] - (+) Send an amount of data in non-blocking mode (DMA) using HAL_IRDA_Transmit_DMA() - (+) At transmission half of transfer HAL_IRDA_TxHalfCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_IRDA_TxHalfCpltCallback() - (+) At transmission end of transfer HAL_IRDA_TxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_IRDA_TxCpltCallback() - (+) Receive an amount of data in non-blocking mode (DMA) using HAL_IRDA_Receive_DMA() - (+) At reception half of transfer HAL_IRDA_RxHalfCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_IRDA_RxHalfCpltCallback() - (+) At reception end of transfer HAL_IRDA_RxCpltCallback() is executed and user can - add his own code by customization of function pointer HAL_IRDA_RxCpltCallback() - (+) In case of transfer Error, HAL_IRDA_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_IRDA_ErrorCallback() - - *** IRDA HAL driver macros list *** - ==================================== - [..] - Below the list of most used macros in IRDA HAL driver. - - (+) __HAL_IRDA_ENABLE: Enable the IRDA peripheral - (+) __HAL_IRDA_DISABLE: Disable the IRDA peripheral - (+) __HAL_IRDA_GET_FLAG : Check whether the specified IRDA flag is set or not - (+) __HAL_IRDA_CLEAR_FLAG : Clear the specified IRDA pending flag - (+) __HAL_IRDA_ENABLE_IT: Enable the specified IRDA interrupt - (+) __HAL_IRDA_DISABLE_IT: Disable the specified IRDA interrupt - (+) __HAL_IRDA_GET_IT_SOURCE: Check whether or not the specified IRDA interrupt is enabled - - [..] - (@) You can refer to the IRDA HAL driver header file for more useful macros - - ##### Callback registration ##### - ================================== - - [..] - The compilation define USE_HAL_IRDA_REGISTER_CALLBACKS when set to 1 - allows the user to configure dynamically the driver callbacks. - - [..] - Use Function @ref HAL_IRDA_RegisterCallback() to register a user callback. - Function @ref HAL_IRDA_RegisterCallback() allows to register following callbacks: - (+) TxHalfCpltCallback : Tx Half Complete Callback. - (+) TxCpltCallback : Tx Complete Callback. - (+) RxHalfCpltCallback : Rx Half Complete Callback. - (+) RxCpltCallback : Rx Complete Callback. - (+) ErrorCallback : Error Callback. - (+) AbortCpltCallback : Abort Complete Callback. - (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. - (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. - (+) MspInitCallback : IRDA MspInit. - (+) MspDeInitCallback : IRDA MspDeInit. - This function takes as parameters the HAL peripheral handle, the Callback ID - and a pointer to the user callback function. - - [..] - Use function @ref HAL_IRDA_UnRegisterCallback() to reset a callback to the default - weak (surcharged) function. - @ref HAL_IRDA_UnRegisterCallback() takes as parameters the HAL peripheral handle, - and the Callback ID. - This function allows to reset following callbacks: - (+) TxHalfCpltCallback : Tx Half Complete Callback. - (+) TxCpltCallback : Tx Complete Callback. - (+) RxHalfCpltCallback : Rx Half Complete Callback. - (+) RxCpltCallback : Rx Complete Callback. - (+) ErrorCallback : Error Callback. - (+) AbortCpltCallback : Abort Complete Callback. - (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. - (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. - (+) MspInitCallback : IRDA MspInit. - (+) MspDeInitCallback : IRDA MspDeInit. - - [..] - By default, after the @ref HAL_IRDA_Init() and when the state is HAL_IRDA_STATE_RESET - all callbacks are set to the corresponding weak (surcharged) functions: - examples @ref HAL_IRDA_TxCpltCallback(), @ref HAL_IRDA_RxHalfCpltCallback(). - Exception done for MspInit and MspDeInit functions that are respectively - reset to the legacy weak (surcharged) functions in the @ref HAL_IRDA_Init() - and @ref HAL_IRDA_DeInit() only when these callbacks are null (not registered beforehand). - If not, MspInit or MspDeInit are not null, the @ref HAL_IRDA_Init() and @ref HAL_IRDA_DeInit() - keep and use the user MspInit/MspDeInit callbacks (registered beforehand). - - [..] - Callbacks can be registered/unregistered in HAL_IRDA_STATE_READY state only. - Exception done MspInit/MspDeInit that can be registered/unregistered - in HAL_IRDA_STATE_READY or HAL_IRDA_STATE_RESET state, thus registered (user) - MspInit/DeInit callbacks can be used during the Init/DeInit. - In that case first register the MspInit/MspDeInit user callbacks - using @ref HAL_IRDA_RegisterCallback() before calling @ref HAL_IRDA_DeInit() - or @ref HAL_IRDA_Init() function. - - [..] - When The compilation define USE_HAL_IRDA_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registration feature is not available - and weak (surcharged) callbacks are used. - - @endverbatim - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f0xx_hal.h" - -#if defined(USART_IRDA_SUPPORT) -/** @addtogroup STM32F0xx_HAL_Driver - * @{ - */ - -/** @defgroup IRDA IRDA - * @brief HAL IRDA module driver - * @{ - */ - -#ifdef HAL_IRDA_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @defgroup IRDA_Private_Constants IRDA Private Constants - * @{ - */ -#define IRDA_TEACK_REACK_TIMEOUT 1000U /*!< IRDA TX or RX enable acknowledge time-out value */ - -#define IRDA_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE \ - | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE)) /*!< UART or USART CR1 fields of parameters set by IRDA_SetConfig API */ - -#define USART_BRR_MIN 0x10U /*!< USART BRR minimum authorized value */ - -#define USART_BRR_MAX 0x0000FFFFU /*!< USART BRR maximum authorized value */ -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup IRDA_Private_Macros IRDA Private Macros - * @{ - */ -/** @brief BRR division operation to set BRR register in 16-bit oversampling mode. - * @param __PCLK__ IRDA clock source. - * @param __BAUD__ Baud rate set by the user. - * @retval Division result - */ -#define IRDA_DIV_SAMPLING16(__PCLK__, __BAUD__) (((__PCLK__) + ((__BAUD__)/2U)) / (__BAUD__)) -/** - * @} - */ - -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @addtogroup IRDA_Private_Functions - * @{ - */ -#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) -void IRDA_InitCallbacksToDefault(IRDA_HandleTypeDef *hirda); -#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ -static HAL_StatusTypeDef IRDA_SetConfig(IRDA_HandleTypeDef *hirda); -static HAL_StatusTypeDef IRDA_CheckIdleState(IRDA_HandleTypeDef *hirda); -static HAL_StatusTypeDef IRDA_WaitOnFlagUntilTimeout(IRDA_HandleTypeDef *hirda, uint32_t Flag, FlagStatus Status, - uint32_t Tickstart, uint32_t Timeout); -static void IRDA_EndTxTransfer(IRDA_HandleTypeDef *hirda); -static void IRDA_EndRxTransfer(IRDA_HandleTypeDef *hirda); -static void IRDA_DMATransmitCplt(DMA_HandleTypeDef *hdma); -static void IRDA_DMATransmitHalfCplt(DMA_HandleTypeDef *hdma); -static void IRDA_DMAReceiveCplt(DMA_HandleTypeDef *hdma); -static void IRDA_DMAReceiveHalfCplt(DMA_HandleTypeDef *hdma); -static void IRDA_DMAError(DMA_HandleTypeDef *hdma); -static void IRDA_DMAAbortOnError(DMA_HandleTypeDef *hdma); -static void IRDA_DMATxAbortCallback(DMA_HandleTypeDef *hdma); -static void IRDA_DMARxAbortCallback(DMA_HandleTypeDef *hdma); -static void IRDA_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma); -static void IRDA_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma); -static void IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda); -static void IRDA_EndTransmit_IT(IRDA_HandleTypeDef *hirda); -static void IRDA_Receive_IT(IRDA_HandleTypeDef *hirda); -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup IRDA_Exported_Functions IRDA Exported Functions - * @{ - */ - -/** @defgroup IRDA_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - ============================================================================== - ##### Initialization and Configuration functions ##### - ============================================================================== - [..] - This subsection provides a set of functions allowing to initialize the USARTx - in asynchronous IRDA mode. - (+) For the asynchronous mode only these parameters can be configured: - (++) Baud Rate - (++) Word Length - (++) Parity: If the parity is enabled, then the MSB bit of the data written - in the data register is transmitted but is changed by the parity bit. - (++) Power mode - (++) Prescaler setting - (++) Receiver/transmitter modes - - [..] - The HAL_IRDA_Init() API follows the USART asynchronous configuration procedures - (details for the procedures are available in reference manual). - -@endverbatim - - Depending on the frame length defined either by the M bit (8-bits or 9-bits) - or by the M1 and M0 bits (7-bit, 8-bit or 9-bit), the possible IRDA frame - formats are listed in the following table. - - Table 1. IRDA frame format. - +-----------------------------------------------------------------------+ - | M bit | PCE bit | IRDA frame | - |-------------------|-----------|---------------------------------------| - | 0 | 0 | | SB | 8-bit data | STB | | - |-------------------|-----------|---------------------------------------| - | 0 | 1 | | SB | 7-bit data | PB | STB | | - |-------------------|-----------|---------------------------------------| - | 1 | 0 | | SB | 9-bit data | STB | | - |-------------------|-----------|---------------------------------------| - | 1 | 1 | | SB | 8-bit data | PB | STB | | - +-----------------------------------------------------------------------+ - | M1 bit | M0 bit | PCE bit | IRDA frame | - |---------|---------|-----------|---------------------------------------| - | 0 | 0 | 0 | | SB | 8 bit data | STB | | - |---------|---------|-----------|---------------------------------------| - | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | | - |---------|---------|-----------|---------------------------------------| - | 0 | 1 | 0 | | SB | 9 bit data | STB | | - |---------|---------|-----------|---------------------------------------| - | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | | - |---------|---------|-----------|---------------------------------------| - | 1 | 0 | 0 | | SB | 7 bit data | STB | | - |---------|---------|-----------|---------------------------------------| - | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | | - +-----------------------------------------------------------------------+ - - * @{ - */ - -/** - * @brief Initialize the IRDA mode according to the specified - * parameters in the IRDA_InitTypeDef and initialize the associated handle. - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified IRDA module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda) -{ - /* Check the IRDA handle allocation */ - if (hirda == NULL) - { - return HAL_ERROR; - } - - /* Check the USART/UART associated to the IRDA handle */ - assert_param(IS_IRDA_INSTANCE(hirda->Instance)); - - if (hirda->gState == HAL_IRDA_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hirda->Lock = HAL_UNLOCKED; - -#if USE_HAL_IRDA_REGISTER_CALLBACKS == 1 - IRDA_InitCallbacksToDefault(hirda); - - if (hirda->MspInitCallback == NULL) - { - hirda->MspInitCallback = HAL_IRDA_MspInit; - } - - /* Init the low level hardware */ - hirda->MspInitCallback(hirda); -#else - /* Init the low level hardware : GPIO, CLOCK */ - HAL_IRDA_MspInit(hirda); -#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ - } - - hirda->gState = HAL_IRDA_STATE_BUSY; - - /* Disable the Peripheral to update the configuration registers */ - __HAL_IRDA_DISABLE(hirda); - - /* Set the IRDA Communication parameters */ - if (IRDA_SetConfig(hirda) == HAL_ERROR) - { - return HAL_ERROR; - } - - /* In IRDA mode, the following bits must be kept cleared: - - LINEN, STOP and CLKEN bits in the USART_CR2 register, - - SCEN and HDSEL bits in the USART_CR3 register.*/ - CLEAR_BIT(hirda->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN | USART_CR2_STOP)); - CLEAR_BIT(hirda->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL)); - - /* set the UART/USART in IRDA mode */ - hirda->Instance->CR3 |= USART_CR3_IREN; - - /* Enable the Peripheral */ - __HAL_IRDA_ENABLE(hirda); - - /* TEACK and/or REACK to check before moving hirda->gState and hirda->RxState to Ready */ - return (IRDA_CheckIdleState(hirda)); -} - -/** - * @brief DeInitialize the IRDA peripheral. - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified IRDA module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda) -{ - /* Check the IRDA handle allocation */ - if (hirda == NULL) - { - return HAL_ERROR; - } - - /* Check the USART/UART associated to the IRDA handle */ - assert_param(IS_IRDA_INSTANCE(hirda->Instance)); - - hirda->gState = HAL_IRDA_STATE_BUSY; - - /* DeInit the low level hardware */ -#if USE_HAL_IRDA_REGISTER_CALLBACKS == 1 - if (hirda->MspDeInitCallback == NULL) - { - hirda->MspDeInitCallback = HAL_IRDA_MspDeInit; - } - /* DeInit the low level hardware */ - hirda->MspDeInitCallback(hirda); -#else - HAL_IRDA_MspDeInit(hirda); -#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ - /* Disable the Peripheral */ - __HAL_IRDA_DISABLE(hirda); - - hirda->ErrorCode = HAL_IRDA_ERROR_NONE; - hirda->gState = HAL_IRDA_STATE_RESET; - hirda->RxState = HAL_IRDA_STATE_RESET; - - /* Process Unlock */ - __HAL_UNLOCK(hirda); - - return HAL_OK; -} - -/** - * @brief Initialize the IRDA MSP. - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified IRDA module. - * @retval None - */ -__weak void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hirda); - - /* NOTE: This function should not be modified, when the callback is needed, - the HAL_IRDA_MspInit can be implemented in the user file - */ -} - -/** - * @brief DeInitialize the IRDA MSP. - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified IRDA module. - * @retval None - */ -__weak void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hirda); - - /* NOTE: This function should not be modified, when the callback is needed, - the HAL_IRDA_MspDeInit can be implemented in the user file - */ -} - -#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) -/** - * @brief Register a User IRDA Callback - * To be used instead of the weak predefined callback - * @param hirda irda handle - * @param CallbackID ID of the callback to be registered - * This parameter can be one of the following values: - * @arg @ref HAL_IRDA_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID - * @arg @ref HAL_IRDA_TX_COMPLETE_CB_ID Tx Complete Callback ID - * @arg @ref HAL_IRDA_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID - * @arg @ref HAL_IRDA_RX_COMPLETE_CB_ID Rx Complete Callback ID - * @arg @ref HAL_IRDA_ERROR_CB_ID Error Callback ID - * @arg @ref HAL_IRDA_ABORT_COMPLETE_CB_ID Abort Complete Callback ID - * @arg @ref HAL_IRDA_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID - * @arg @ref HAL_IRDA_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID - * @arg @ref HAL_IRDA_MSPINIT_CB_ID MspInit Callback ID - * @arg @ref HAL_IRDA_MSPDEINIT_CB_ID MspDeInit Callback ID - * @param pCallback pointer to the Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_IRDA_RegisterCallback(IRDA_HandleTypeDef *hirda, HAL_IRDA_CallbackIDTypeDef CallbackID, - pIRDA_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hirda->ErrorCode |= HAL_IRDA_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(hirda); - - if (hirda->gState == HAL_IRDA_STATE_READY) - { - switch (CallbackID) - { - case HAL_IRDA_TX_HALFCOMPLETE_CB_ID : - hirda->TxHalfCpltCallback = pCallback; - break; - - case HAL_IRDA_TX_COMPLETE_CB_ID : - hirda->TxCpltCallback = pCallback; - break; - - case HAL_IRDA_RX_HALFCOMPLETE_CB_ID : - hirda->RxHalfCpltCallback = pCallback; - break; - - case HAL_IRDA_RX_COMPLETE_CB_ID : - hirda->RxCpltCallback = pCallback; - break; - - case HAL_IRDA_ERROR_CB_ID : - hirda->ErrorCallback = pCallback; - break; - - case HAL_IRDA_ABORT_COMPLETE_CB_ID : - hirda->AbortCpltCallback = pCallback; - break; - - case HAL_IRDA_ABORT_TRANSMIT_COMPLETE_CB_ID : - hirda->AbortTransmitCpltCallback = pCallback; - break; - - case HAL_IRDA_ABORT_RECEIVE_COMPLETE_CB_ID : - hirda->AbortReceiveCpltCallback = pCallback; - break; - - case HAL_IRDA_MSPINIT_CB_ID : - hirda->MspInitCallback = pCallback; - break; - - case HAL_IRDA_MSPDEINIT_CB_ID : - hirda->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hirda->ErrorCode |= HAL_IRDA_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (hirda->gState == HAL_IRDA_STATE_RESET) - { - switch (CallbackID) - { - case HAL_IRDA_MSPINIT_CB_ID : - hirda->MspInitCallback = pCallback; - break; - - case HAL_IRDA_MSPDEINIT_CB_ID : - hirda->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hirda->ErrorCode |= HAL_IRDA_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hirda->ErrorCode |= HAL_IRDA_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hirda); - - return status; -} - -/** - * @brief Unregister an IRDA callback - * IRDA callback is redirected to the weak predefined callback - * @param hirda irda handle - * @param CallbackID ID of the callback to be unregistered - * This parameter can be one of the following values: - * @arg @ref HAL_IRDA_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID - * @arg @ref HAL_IRDA_TX_COMPLETE_CB_ID Tx Complete Callback ID - * @arg @ref HAL_IRDA_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID - * @arg @ref HAL_IRDA_RX_COMPLETE_CB_ID Rx Complete Callback ID - * @arg @ref HAL_IRDA_ERROR_CB_ID Error Callback ID - * @arg @ref HAL_IRDA_ABORT_COMPLETE_CB_ID Abort Complete Callback ID - * @arg @ref HAL_IRDA_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID - * @arg @ref HAL_IRDA_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID - * @arg @ref HAL_IRDA_MSPINIT_CB_ID MspInit Callback ID - * @arg @ref HAL_IRDA_MSPDEINIT_CB_ID MspDeInit Callback ID - * @retval HAL status - */ -HAL_StatusTypeDef HAL_IRDA_UnRegisterCallback(IRDA_HandleTypeDef *hirda, HAL_IRDA_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hirda); - - if (HAL_IRDA_STATE_READY == hirda->gState) - { - switch (CallbackID) - { - case HAL_IRDA_TX_HALFCOMPLETE_CB_ID : - hirda->TxHalfCpltCallback = HAL_IRDA_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ - break; - - case HAL_IRDA_TX_COMPLETE_CB_ID : - hirda->TxCpltCallback = HAL_IRDA_TxCpltCallback; /* Legacy weak TxCpltCallback */ - break; - - case HAL_IRDA_RX_HALFCOMPLETE_CB_ID : - hirda->RxHalfCpltCallback = HAL_IRDA_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ - break; - - case HAL_IRDA_RX_COMPLETE_CB_ID : - hirda->RxCpltCallback = HAL_IRDA_RxCpltCallback; /* Legacy weak RxCpltCallback */ - break; - - case HAL_IRDA_ERROR_CB_ID : - hirda->ErrorCallback = HAL_IRDA_ErrorCallback; /* Legacy weak ErrorCallback */ - break; - - case HAL_IRDA_ABORT_COMPLETE_CB_ID : - hirda->AbortCpltCallback = HAL_IRDA_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ - break; - - case HAL_IRDA_ABORT_TRANSMIT_COMPLETE_CB_ID : - hirda->AbortTransmitCpltCallback = HAL_IRDA_AbortTransmitCpltCallback; /* Legacy weak AbortTransmitCpltCallback */ - break; - - case HAL_IRDA_ABORT_RECEIVE_COMPLETE_CB_ID : - hirda->AbortReceiveCpltCallback = HAL_IRDA_AbortReceiveCpltCallback; /* Legacy weak AbortReceiveCpltCallback */ - break; - - case HAL_IRDA_MSPINIT_CB_ID : - hirda->MspInitCallback = HAL_IRDA_MspInit; /* Legacy weak MspInitCallback */ - break; - - case HAL_IRDA_MSPDEINIT_CB_ID : - hirda->MspDeInitCallback = HAL_IRDA_MspDeInit; /* Legacy weak MspDeInitCallback */ - break; - - default : - /* Update the error code */ - hirda->ErrorCode |= HAL_IRDA_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_IRDA_STATE_RESET == hirda->gState) - { - switch (CallbackID) - { - case HAL_IRDA_MSPINIT_CB_ID : - hirda->MspInitCallback = HAL_IRDA_MspInit; - break; - - case HAL_IRDA_MSPDEINIT_CB_ID : - hirda->MspDeInitCallback = HAL_IRDA_MspDeInit; - break; - - default : - /* Update the error code */ - hirda->ErrorCode |= HAL_IRDA_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hirda->ErrorCode |= HAL_IRDA_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hirda); - - return status; -} -#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup IRDA_Exported_Functions_Group2 IO operation functions - * @brief IRDA Transmit and Receive functions - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the IRDA data transfers. - - [..] - IrDA is a half duplex communication protocol. If the Transmitter is busy, any data - on the IrDA receive line will be ignored by the IrDA decoder and if the Receiver - is busy, data on the TX from the USART to IrDA will not be encoded by IrDA. - While receiving data, transmission should be avoided as the data to be transmitted - could be corrupted. - - [..] - (#) There are two modes of transfer: - (++) Blocking mode: the communication is performed in polling mode. - The HAL status of all data processing is returned by the same function - after finishing transfer. - (++) Non-Blocking mode: the communication is performed using Interrupts - or DMA, these API's return the HAL status. - The end of the data processing will be indicated through the - dedicated IRDA IRQ when using Interrupt mode or the DMA IRQ when - using DMA mode. - The HAL_IRDA_TxCpltCallback(), HAL_IRDA_RxCpltCallback() user callbacks - will be executed respectively at the end of the Transmit or Receive process - The HAL_IRDA_ErrorCallback() user callback will be executed when a communication error is detected - - (#) Blocking mode APIs are : - (++) HAL_IRDA_Transmit() - (++) HAL_IRDA_Receive() - - (#) Non Blocking mode APIs with Interrupt are : - (++) HAL_IRDA_Transmit_IT() - (++) HAL_IRDA_Receive_IT() - (++) HAL_IRDA_IRQHandler() - - (#) Non Blocking mode functions with DMA are : - (++) HAL_IRDA_Transmit_DMA() - (++) HAL_IRDA_Receive_DMA() - (++) HAL_IRDA_DMAPause() - (++) HAL_IRDA_DMAResume() - (++) HAL_IRDA_DMAStop() - - (#) A set of Transfer Complete Callbacks are provided in Non Blocking mode: - (++) HAL_IRDA_TxHalfCpltCallback() - (++) HAL_IRDA_TxCpltCallback() - (++) HAL_IRDA_RxHalfCpltCallback() - (++) HAL_IRDA_RxCpltCallback() - (++) HAL_IRDA_ErrorCallback() - - (#) Non-Blocking mode transfers could be aborted using Abort API's : - (++) HAL_IRDA_Abort() - (++) HAL_IRDA_AbortTransmit() - (++) HAL_IRDA_AbortReceive() - (++) HAL_IRDA_Abort_IT() - (++) HAL_IRDA_AbortTransmit_IT() - (++) HAL_IRDA_AbortReceive_IT() - - (#) For Abort services based on interrupts (HAL_IRDA_Abortxxx_IT), a set of Abort Complete Callbacks are provided: - (++) HAL_IRDA_AbortCpltCallback() - (++) HAL_IRDA_AbortTransmitCpltCallback() - (++) HAL_IRDA_AbortReceiveCpltCallback() - - (#) In Non-Blocking mode transfers, possible errors are split into 2 categories. - Errors are handled as follows : - (++) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is - to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error in Interrupt mode reception . - Received character is then retrieved and stored in Rx buffer, Error code is set to allow user to identify error type, - and HAL_IRDA_ErrorCallback() user callback is executed. Transfer is kept ongoing on IRDA side. - If user wants to abort it, Abort services should be called by user. - (++) Error is considered as Blocking : Transfer could not be completed properly and is aborted. - This concerns Overrun Error In Interrupt mode reception and all errors in DMA mode. - Error code is set to allow user to identify error type, and HAL_IRDA_ErrorCallback() user callback is executed. - -@endverbatim - * @{ - */ - -/** - * @brief Send an amount of data in blocking mode. - * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), - * the sent data is handled as a set of u16. In this case, Size must reflect the number - * of u16 available through pData. - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified IRDA module. - * @param pData Pointer to data buffer (u8 or u16 data elements). - * @param Size Amount of data elements (u8 or u16) to be sent. - * @param Timeout Specify timeout value. - * @retval HAL status - */ -/** - * @note When IRDA parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), - * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) - * (as sent data will be handled using u16 pointer cast). Depending on compilation chain, - * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData. - */ -HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - uint8_t *pdata8bits; - uint16_t *pdata16bits; - uint32_t tickstart; - - /* Check that a Tx process is not already ongoing */ - if (hirda->gState == HAL_IRDA_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* In case of 9bits/No Parity transfer, pData buffer provided as input paramter - should be aligned on a u16 frontier, as data to be filled into TDR will be - handled through a u16 cast. */ - if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) - { - if ((((uint32_t)pData) & 1U) != 0U) - { - return HAL_ERROR; - } - } - - /* Process Locked */ - __HAL_LOCK(hirda); - - hirda->ErrorCode = HAL_IRDA_ERROR_NONE; - hirda->gState = HAL_IRDA_STATE_BUSY_TX; - - /* Init tickstart for timeout managment*/ - tickstart = HAL_GetTick(); - - hirda->TxXferSize = Size; - hirda->TxXferCount = Size; - - /* In case of 9bits/No Parity transfer, pData needs to be handled as a uint16_t pointer */ - if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) - { - pdata8bits = NULL; - pdata16bits = (uint16_t *) pData; /* Derogation R.11.3 */ - } - else - { - pdata8bits = pData; - pdata16bits = NULL; - } - - while (hirda->TxXferCount > 0U) - { - hirda->TxXferCount--; - - if (IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - if (pdata8bits == NULL) - { - hirda->Instance->TDR = (uint16_t)(*pdata16bits & 0x01FFU); - pdata16bits++; - } - else - { - hirda->Instance->TDR = (uint8_t)(*pdata8bits & 0xFFU); - pdata8bits++; - } - } - - if (IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* At end of Tx process, restore hirda->gState to Ready */ - hirda->gState = HAL_IRDA_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hirda); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive an amount of data in blocking mode. - * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), - * the received data is handled as a set of u16. In this case, Size must reflect the number - * of u16 available through pData. - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified IRDA module. - * @param pData Pointer to data buffer (u8 or u16 data elements). - * @param Size Amount of data elements (u8 or u16) to be received. - * @param Timeout Specify timeout value. - * @retval HAL status - */ -/** - * @note When IRDA parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), - * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits) - * (as received data will be handled using u16 pointer cast). Depending on compilation chain, - * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData. - */ -HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - uint8_t *pdata8bits; - uint16_t *pdata16bits; - uint16_t uhMask; - uint32_t tickstart; - - /* Check that a Rx process is not already ongoing */ - if (hirda->RxState == HAL_IRDA_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* In case of 9bits/No Parity transfer, pData buffer provided as input paramter - should be aligned on a u16 frontier, as data to be received from RDR will be - handled through a u16 cast. */ - if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) - { - if ((((uint32_t)pData) & 1U) != 0U) - { - return HAL_ERROR; - } - } - - /* Process Locked */ - __HAL_LOCK(hirda); - - hirda->ErrorCode = HAL_IRDA_ERROR_NONE; - hirda->RxState = HAL_IRDA_STATE_BUSY_RX; - - /* Init tickstart for timeout managment*/ - tickstart = HAL_GetTick(); - - hirda->RxXferSize = Size; - hirda->RxXferCount = Size; - - /* Computation of the mask to apply to RDR register - of the UART associated to the IRDA */ - IRDA_MASK_COMPUTATION(hirda); - uhMask = hirda->Mask; - - /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ - if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) - { - pdata8bits = NULL; - pdata16bits = (uint16_t *) pData; /* Derogation R.11.3 */ - } - else - { - pdata8bits = pData; - pdata16bits = NULL; - } - - /* Check data remaining to be received */ - while (hirda->RxXferCount > 0U) - { - hirda->RxXferCount--; - - if (IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - if (pdata8bits == NULL) - { - *pdata16bits = (uint16_t)(hirda->Instance->RDR & uhMask); - pdata16bits++; - } - else - { - *pdata8bits = (uint8_t)(hirda->Instance->RDR & (uint8_t)uhMask); - pdata8bits++; - } - } - - /* At end of Rx process, restore hirda->RxState to Ready */ - hirda->RxState = HAL_IRDA_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hirda); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Send an amount of data in interrupt mode. - * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), - * the sent data is handled as a set of u16. In this case, Size must reflect the number - * of u16 available through pData. - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified IRDA module. - * @param pData Pointer to data buffer (u8 or u16 data elements). - * @param Size Amount of data elements (u8 or u16) to be sent. - * @retval HAL status - */ -/** - * @note When IRDA parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), - * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) - * (as sent data will be handled using u16 pointer cast). Depending on compilation chain, - * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData. - */ -HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size) -{ - /* Check that a Tx process is not already ongoing */ - if (hirda->gState == HAL_IRDA_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* In case of 9bits/No Parity transfer, pData buffer provided as input paramter - should be aligned on a u16 frontier, as data to be filled into TDR will be - handled through a u16 cast. */ - if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) - { - if ((((uint32_t)pData) & 1U) != 0U) - { - return HAL_ERROR; - } - } - - /* Process Locked */ - __HAL_LOCK(hirda); - - hirda->pTxBuffPtr = pData; - hirda->TxXferSize = Size; - hirda->TxXferCount = Size; - - hirda->ErrorCode = HAL_IRDA_ERROR_NONE; - hirda->gState = HAL_IRDA_STATE_BUSY_TX; - - /* Process Unlocked */ - __HAL_UNLOCK(hirda); - - /* Enable the IRDA Transmit Data Register Empty Interrupt */ - SET_BIT(hirda->Instance->CR1, USART_CR1_TXEIE); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive an amount of data in interrupt mode. - * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), - * the received data is handled as a set of u16. In this case, Size must reflect the number - * of u16 available through pData. - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified IRDA module. - * @param pData Pointer to data buffer (u8 or u16 data elements). - * @param Size Amount of data elements (u8 or u16) to be received. - * @retval HAL status - */ -/** - * @note When IRDA parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), - * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits) - * (as received data will be handled using u16 pointer cast). Depending on compilation chain, - * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData. - */ -HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size) -{ - /* Check that a Rx process is not already ongoing */ - if (hirda->RxState == HAL_IRDA_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* In case of 9bits/No Parity transfer, pData buffer provided as input paramter - should be aligned on a u16 frontier, as data to be received from RDR will be - handled through a u16 cast. */ - if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) - { - if ((((uint32_t)pData) & 1U) != 0U) - { - return HAL_ERROR; - } - } - - /* Process Locked */ - __HAL_LOCK(hirda); - - hirda->pRxBuffPtr = pData; - hirda->RxXferSize = Size; - hirda->RxXferCount = Size; - - /* Computation of the mask to apply to the RDR register - of the UART associated to the IRDA */ - IRDA_MASK_COMPUTATION(hirda); - - hirda->ErrorCode = HAL_IRDA_ERROR_NONE; - hirda->RxState = HAL_IRDA_STATE_BUSY_RX; - - /* Process Unlocked */ - __HAL_UNLOCK(hirda); - - /* Enable the IRDA Parity Error and Data Register not empty Interrupts */ - SET_BIT(hirda->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE); - - /* Enable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */ - SET_BIT(hirda->Instance->CR3, USART_CR3_EIE); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Send an amount of data in DMA mode. - * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), - * the sent data is handled as a set of u16. In this case, Size must reflect the number - * of u16 available through pData. - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified IRDA module. - * @param pData pointer to data buffer (u8 or u16 data elements). - * @param Size Amount of data elements (u8 or u16) to be sent. - * @retval HAL status - */ -/** - * @note When IRDA parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), - * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) - * (as sent data will be handled by DMA from halfword frontier). Depending on compilation chain, - * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData. - */ -HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size) -{ - /* Check that a Tx process is not already ongoing */ - if (hirda->gState == HAL_IRDA_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* In case of 9bits/No Parity transfer, pData buffer provided as input paramter - should be aligned on a u16 frontier, as data copy into TDR will be - handled by DMA from a u16 frontier. */ - if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) - { - if ((((uint32_t)pData) & 1U) != 0U) - { - return HAL_ERROR; - } - } - - /* Process Locked */ - __HAL_LOCK(hirda); - - hirda->pTxBuffPtr = pData; - hirda->TxXferSize = Size; - hirda->TxXferCount = Size; - - hirda->ErrorCode = HAL_IRDA_ERROR_NONE; - hirda->gState = HAL_IRDA_STATE_BUSY_TX; - - /* Set the IRDA DMA transfer complete callback */ - hirda->hdmatx->XferCpltCallback = IRDA_DMATransmitCplt; - - /* Set the IRDA DMA half transfer complete callback */ - hirda->hdmatx->XferHalfCpltCallback = IRDA_DMATransmitHalfCplt; - - /* Set the DMA error callback */ - hirda->hdmatx->XferErrorCallback = IRDA_DMAError; - - /* Set the DMA abort callback */ - hirda->hdmatx->XferAbortCallback = NULL; - - /* Enable the IRDA transmit DMA channel */ - if (HAL_DMA_Start_IT(hirda->hdmatx, (uint32_t)hirda->pTxBuffPtr, (uint32_t)&hirda->Instance->TDR, Size) == HAL_OK) - { - /* Clear the TC flag in the ICR register */ - __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_TCF); - - /* Process Unlocked */ - __HAL_UNLOCK(hirda); - - /* Enable the DMA transfer for transmit request by setting the DMAT bit - in the USART CR3 register */ - SET_BIT(hirda->Instance->CR3, USART_CR3_DMAT); - - return HAL_OK; - } - else - { - /* Set error code to DMA */ - hirda->ErrorCode = HAL_IRDA_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hirda); - - /* Restore hirda->gState to ready */ - hirda->gState = HAL_IRDA_STATE_READY; - - return HAL_ERROR; - } - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive an amount of data in DMA mode. - * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), - * the received data is handled as a set of u16. In this case, Size must reflect the number - * of u16 available through pData. - * @note When the IRDA parity is enabled (PCE = 1), the received data contains - * the parity bit (MSB position). - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified IRDA module. - * @param pData Pointer to data buffer (u8 or u16 data elements). - * @param Size Amount of data elements (u8 or u16) to be received. - * @retval HAL status - */ -/** - * @note When IRDA parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), - * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits) - * (as received data will be handled by DMA from halfword frontier). Depending on compilation chain, - * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData. - */ -HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size) -{ - /* Check that a Rx process is not already ongoing */ - if (hirda->RxState == HAL_IRDA_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* In case of 9bits/No Parity transfer, pData buffer provided as input paramter - should be aligned on a u16 frontier, as data copy from RDR will be - handled by DMA from a u16 frontier. */ - if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) - { - if ((((uint32_t)pData) & 1U) != 0U) - { - return HAL_ERROR; - } - } - - /* Process Locked */ - __HAL_LOCK(hirda); - - hirda->pRxBuffPtr = pData; - hirda->RxXferSize = Size; - - hirda->ErrorCode = HAL_IRDA_ERROR_NONE; - hirda->RxState = HAL_IRDA_STATE_BUSY_RX; - - /* Set the IRDA DMA transfer complete callback */ - hirda->hdmarx->XferCpltCallback = IRDA_DMAReceiveCplt; - - /* Set the IRDA DMA half transfer complete callback */ - hirda->hdmarx->XferHalfCpltCallback = IRDA_DMAReceiveHalfCplt; - - /* Set the DMA error callback */ - hirda->hdmarx->XferErrorCallback = IRDA_DMAError; - - /* Set the DMA abort callback */ - hirda->hdmarx->XferAbortCallback = NULL; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(hirda->hdmarx, (uint32_t)&hirda->Instance->RDR, (uint32_t)hirda->pRxBuffPtr, Size) == HAL_OK) - { - /* Process Unlocked */ - __HAL_UNLOCK(hirda); - - /* Enable the UART Parity Error Interrupt */ - SET_BIT(hirda->Instance->CR1, USART_CR1_PEIE); - - /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ - SET_BIT(hirda->Instance->CR3, USART_CR3_EIE); - - /* Enable the DMA transfer for the receiver request by setting the DMAR bit - in the USART CR3 register */ - SET_BIT(hirda->Instance->CR3, USART_CR3_DMAR); - - return HAL_OK; - } - else - { - /* Set error code to DMA */ - hirda->ErrorCode = HAL_IRDA_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hirda); - - /* Restore hirda->RxState to ready */ - hirda->RxState = HAL_IRDA_STATE_READY; - - return HAL_ERROR; - } - } - else - { - return HAL_BUSY; - } -} - - -/** - * @brief Pause the DMA Transfer. - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified IRDA module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda) -{ - /* Process Locked */ - __HAL_LOCK(hirda); - - if (hirda->gState == HAL_IRDA_STATE_BUSY_TX) - { - if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) - { - /* Disable the IRDA DMA Tx request */ - CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); - } - } - if (hirda->RxState == HAL_IRDA_STATE_BUSY_RX) - { - if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) - { - /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ - CLEAR_BIT(hirda->Instance->CR1, USART_CR1_PEIE); - CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); - - /* Disable the IRDA DMA Rx request */ - CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); - } - } - - /* Process Unlocked */ - __HAL_UNLOCK(hirda); - - return HAL_OK; -} - -/** - * @brief Resume the DMA Transfer. - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda) -{ - /* Process Locked */ - __HAL_LOCK(hirda); - - if (hirda->gState == HAL_IRDA_STATE_BUSY_TX) - { - /* Enable the IRDA DMA Tx request */ - SET_BIT(hirda->Instance->CR3, USART_CR3_DMAT); - } - if (hirda->RxState == HAL_IRDA_STATE_BUSY_RX) - { - /* Clear the Overrun flag before resuming the Rx transfer*/ - __HAL_IRDA_CLEAR_OREFLAG(hirda); - - /* Reenable PE and ERR (Frame error, noise error, overrun error) interrupts */ - SET_BIT(hirda->Instance->CR1, USART_CR1_PEIE); - SET_BIT(hirda->Instance->CR3, USART_CR3_EIE); - - /* Enable the IRDA DMA Rx request */ - SET_BIT(hirda->Instance->CR3, USART_CR3_DMAR); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hirda); - - return HAL_OK; -} - -/** - * @brief Stop the DMA Transfer. - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda) -{ - /* The Lock is not implemented on this API to allow the user application - to call the HAL IRDA API under callbacks HAL_IRDA_TxCpltCallback() / HAL_IRDA_RxCpltCallback() / - HAL_IRDA_TxHalfCpltCallback / HAL_IRDA_RxHalfCpltCallback: - indeed, when HAL_DMA_Abort() API is called, the DMA TX/RX Transfer or Half Transfer complete - interrupt is generated if the DMA transfer interruption occurs at the middle or at the end of - the stream and the corresponding call back is executed. */ - - /* Stop IRDA DMA Tx request if ongoing */ - if (hirda->gState == HAL_IRDA_STATE_BUSY_TX) - { - if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) - { - CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); - - /* Abort the IRDA DMA Tx channel */ - if (hirda->hdmatx != NULL) - { - if (HAL_DMA_Abort(hirda->hdmatx) != HAL_OK) - { - if (HAL_DMA_GetError(hirda->hdmatx) == HAL_DMA_ERROR_TIMEOUT) - { - /* Set error code to DMA */ - hirda->ErrorCode = HAL_IRDA_ERROR_DMA; - - return HAL_TIMEOUT; - } - } - } - - IRDA_EndTxTransfer(hirda); - } - } - - /* Stop IRDA DMA Rx request if ongoing */ - if (hirda->RxState == HAL_IRDA_STATE_BUSY_RX) - { - if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) - { - CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); - - /* Abort the IRDA DMA Rx channel */ - if (hirda->hdmarx != NULL) - { - if (HAL_DMA_Abort(hirda->hdmarx) != HAL_OK) - { - if (HAL_DMA_GetError(hirda->hdmarx) == HAL_DMA_ERROR_TIMEOUT) - { - /* Set error code to DMA */ - hirda->ErrorCode = HAL_IRDA_ERROR_DMA; - - return HAL_TIMEOUT; - } - } - } - - IRDA_EndRxTransfer(hirda); - } - } - - return HAL_OK; -} - -/** - * @brief Abort ongoing transfers (blocking mode). - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. - * This procedure performs following operations : - * - Disable IRDA Interrupts (Tx and Rx) - * - Disable the DMA transfer in the peripheral register (if enabled) - * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) - * - Set handle State to READY - * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_IRDA_Abort(IRDA_HandleTypeDef *hirda) -{ - /* Disable TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ - CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE)); - CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); - - /* Disable the IRDA DMA Tx request if enabled */ - if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) - { - CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); - - /* Abort the IRDA DMA Tx channel : use blocking DMA Abort API (no callback) */ - if (hirda->hdmatx != NULL) - { - /* Set the IRDA DMA Abort callback to Null. - No call back execution at end of DMA abort procedure */ - hirda->hdmatx->XferAbortCallback = NULL; - - if (HAL_DMA_Abort(hirda->hdmatx) != HAL_OK) - { - if (HAL_DMA_GetError(hirda->hdmatx) == HAL_DMA_ERROR_TIMEOUT) - { - /* Set error code to DMA */ - hirda->ErrorCode = HAL_IRDA_ERROR_DMA; - - return HAL_TIMEOUT; - } - } - } - } - - /* Disable the IRDA DMA Rx request if enabled */ - if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) - { - CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); - - /* Abort the IRDA DMA Rx channel : use blocking DMA Abort API (no callback) */ - if (hirda->hdmarx != NULL) - { - /* Set the IRDA DMA Abort callback to Null. - No call back execution at end of DMA abort procedure */ - hirda->hdmarx->XferAbortCallback = NULL; - - if (HAL_DMA_Abort(hirda->hdmarx) != HAL_OK) - { - if (HAL_DMA_GetError(hirda->hdmarx) == HAL_DMA_ERROR_TIMEOUT) - { - /* Set error code to DMA */ - hirda->ErrorCode = HAL_IRDA_ERROR_DMA; - - return HAL_TIMEOUT; - } - } - } - } - - /* Reset Tx and Rx transfer counters */ - hirda->TxXferCount = 0U; - hirda->RxXferCount = 0U; - - /* Clear the Error flags in the ICR register */ - __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); - - /* Restore hirda->gState and hirda->RxState to Ready */ - hirda->gState = HAL_IRDA_STATE_READY; - hirda->RxState = HAL_IRDA_STATE_READY; - - /* Reset Handle ErrorCode to No Error */ - hirda->ErrorCode = HAL_IRDA_ERROR_NONE; - - return HAL_OK; -} - -/** - * @brief Abort ongoing Transmit transfer (blocking mode). - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. - * This procedure performs following operations : - * - Disable IRDA Interrupts (Tx) - * - Disable the DMA transfer in the peripheral register (if enabled) - * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) - * - Set handle State to READY - * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_IRDA_AbortTransmit(IRDA_HandleTypeDef *hirda) -{ - /* Disable TXEIE and TCIE interrupts */ - CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); - - /* Disable the IRDA DMA Tx request if enabled */ - if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) - { - CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); - - /* Abort the IRDA DMA Tx channel : use blocking DMA Abort API (no callback) */ - if (hirda->hdmatx != NULL) - { - /* Set the IRDA DMA Abort callback to Null. - No call back execution at end of DMA abort procedure */ - hirda->hdmatx->XferAbortCallback = NULL; - - if (HAL_DMA_Abort(hirda->hdmatx) != HAL_OK) - { - if (HAL_DMA_GetError(hirda->hdmatx) == HAL_DMA_ERROR_TIMEOUT) - { - /* Set error code to DMA */ - hirda->ErrorCode = HAL_IRDA_ERROR_DMA; - - return HAL_TIMEOUT; - } - } - } - } - - /* Reset Tx transfer counter */ - hirda->TxXferCount = 0U; - - /* Restore hirda->gState to Ready */ - hirda->gState = HAL_IRDA_STATE_READY; - - return HAL_OK; -} - -/** - * @brief Abort ongoing Receive transfer (blocking mode). - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. - * This procedure performs following operations : - * - Disable IRDA Interrupts (Rx) - * - Disable the DMA transfer in the peripheral register (if enabled) - * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) - * - Set handle State to READY - * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_IRDA_AbortReceive(IRDA_HandleTypeDef *hirda) -{ - /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ - CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); - CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); - - /* Disable the IRDA DMA Rx request if enabled */ - if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) - { - CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); - - /* Abort the IRDA DMA Rx channel : use blocking DMA Abort API (no callback) */ - if (hirda->hdmarx != NULL) - { - /* Set the IRDA DMA Abort callback to Null. - No call back execution at end of DMA abort procedure */ - hirda->hdmarx->XferAbortCallback = NULL; - - if (HAL_DMA_Abort(hirda->hdmarx) != HAL_OK) - { - if (HAL_DMA_GetError(hirda->hdmarx) == HAL_DMA_ERROR_TIMEOUT) - { - /* Set error code to DMA */ - hirda->ErrorCode = HAL_IRDA_ERROR_DMA; - - return HAL_TIMEOUT; - } - } - } - } - - /* Reset Rx transfer counter */ - hirda->RxXferCount = 0U; - - /* Clear the Error flags in the ICR register */ - __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); - - /* Restore hirda->RxState to Ready */ - hirda->RxState = HAL_IRDA_STATE_READY; - - return HAL_OK; -} - -/** - * @brief Abort ongoing transfers (Interrupt mode). - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. - * This procedure performs following operations : - * - Disable IRDA Interrupts (Tx and Rx) - * - Disable the DMA transfer in the peripheral register (if enabled) - * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) - * - Set handle State to READY - * - At abort completion, call user abort complete callback - * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be - * considered as completed only when user abort complete callback is executed (not when exiting function). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_IRDA_Abort_IT(IRDA_HandleTypeDef *hirda) -{ - uint32_t abortcplt = 1U; - - /* Disable TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ - CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE)); - CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); - - /* If DMA Tx and/or DMA Rx Handles are associated to IRDA Handle, DMA Abort complete callbacks should be initialised - before any call to DMA Abort functions */ - /* DMA Tx Handle is valid */ - if (hirda->hdmatx != NULL) - { - /* Set DMA Abort Complete callback if IRDA DMA Tx request if enabled. - Otherwise, set it to NULL */ - if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) - { - hirda->hdmatx->XferAbortCallback = IRDA_DMATxAbortCallback; - } - else - { - hirda->hdmatx->XferAbortCallback = NULL; - } - } - /* DMA Rx Handle is valid */ - if (hirda->hdmarx != NULL) - { - /* Set DMA Abort Complete callback if IRDA DMA Rx request if enabled. - Otherwise, set it to NULL */ - if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) - { - hirda->hdmarx->XferAbortCallback = IRDA_DMARxAbortCallback; - } - else - { - hirda->hdmarx->XferAbortCallback = NULL; - } - } - - /* Disable the IRDA DMA Tx request if enabled */ - if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) - { - /* Disable DMA Tx at UART level */ - CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); - - /* Abort the IRDA DMA Tx channel : use non blocking DMA Abort API (callback) */ - if (hirda->hdmatx != NULL) - { - /* IRDA Tx DMA Abort callback has already been initialised : - will lead to call HAL_IRDA_AbortCpltCallback() at end of DMA abort procedure */ - - /* Abort DMA TX */ - if (HAL_DMA_Abort_IT(hirda->hdmatx) != HAL_OK) - { - hirda->hdmatx->XferAbortCallback = NULL; - } - else - { - abortcplt = 0U; - } - } - } - - /* Disable the IRDA DMA Rx request if enabled */ - if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) - { - CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); - - /* Abort the IRDA DMA Rx channel : use non blocking DMA Abort API (callback) */ - if (hirda->hdmarx != NULL) - { - /* IRDA Rx DMA Abort callback has already been initialised : - will lead to call HAL_IRDA_AbortCpltCallback() at end of DMA abort procedure */ - - /* Abort DMA RX */ - if (HAL_DMA_Abort_IT(hirda->hdmarx) != HAL_OK) - { - hirda->hdmarx->XferAbortCallback = NULL; - abortcplt = 1U; - } - else - { - abortcplt = 0U; - } - } - } - - /* if no DMA abort complete callback execution is required => call user Abort Complete callback */ - if (abortcplt == 1U) - { - /* Reset Tx and Rx transfer counters */ - hirda->TxXferCount = 0U; - hirda->RxXferCount = 0U; - - /* Reset errorCode */ - hirda->ErrorCode = HAL_IRDA_ERROR_NONE; - - /* Clear the Error flags in the ICR register */ - __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); - - /* Restore hirda->gState and hirda->RxState to Ready */ - hirda->gState = HAL_IRDA_STATE_READY; - hirda->RxState = HAL_IRDA_STATE_READY; - - /* As no DMA to be aborted, call directly user Abort complete callback */ -#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) - /* Call registered Abort complete callback */ - hirda->AbortCpltCallback(hirda); -#else - /* Call legacy weak Abort complete callback */ - HAL_IRDA_AbortCpltCallback(hirda); -#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ - } - - return HAL_OK; -} - -/** - * @brief Abort ongoing Transmit transfer (Interrupt mode). - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. - * This procedure performs following operations : - * - Disable IRDA Interrupts (Tx) - * - Disable the DMA transfer in the peripheral register (if enabled) - * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) - * - Set handle State to READY - * - At abort completion, call user abort complete callback - * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be - * considered as completed only when user abort complete callback is executed (not when exiting function). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_IRDA_AbortTransmit_IT(IRDA_HandleTypeDef *hirda) -{ - /* Disable TXEIE and TCIE interrupts */ - CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); - - /* Disable the IRDA DMA Tx request if enabled */ - if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) - { - CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); - - /* Abort the IRDA DMA Tx channel : use non blocking DMA Abort API (callback) */ - if (hirda->hdmatx != NULL) - { - /* Set the IRDA DMA Abort callback : - will lead to call HAL_IRDA_AbortCpltCallback() at end of DMA abort procedure */ - hirda->hdmatx->XferAbortCallback = IRDA_DMATxOnlyAbortCallback; - - /* Abort DMA TX */ - if (HAL_DMA_Abort_IT(hirda->hdmatx) != HAL_OK) - { - /* Call Directly hirda->hdmatx->XferAbortCallback function in case of error */ - hirda->hdmatx->XferAbortCallback(hirda->hdmatx); - } - } - else - { - /* Reset Tx transfer counter */ - hirda->TxXferCount = 0U; - - /* Restore hirda->gState to Ready */ - hirda->gState = HAL_IRDA_STATE_READY; - - /* As no DMA to be aborted, call directly user Abort complete callback */ -#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) - /* Call registered Abort Transmit Complete Callback */ - hirda->AbortTransmitCpltCallback(hirda); -#else - /* Call legacy weak Abort Transmit Complete Callback */ - HAL_IRDA_AbortTransmitCpltCallback(hirda); -#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ - } - } - else - { - /* Reset Tx transfer counter */ - hirda->TxXferCount = 0U; - - /* Restore hirda->gState to Ready */ - hirda->gState = HAL_IRDA_STATE_READY; - - /* As no DMA to be aborted, call directly user Abort complete callback */ -#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) - /* Call registered Abort Transmit Complete Callback */ - hirda->AbortTransmitCpltCallback(hirda); -#else - /* Call legacy weak Abort Transmit Complete Callback */ - HAL_IRDA_AbortTransmitCpltCallback(hirda); -#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ - } - - return HAL_OK; -} - -/** - * @brief Abort ongoing Receive transfer (Interrupt mode). - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. - * This procedure performs following operations : - * - Disable IRDA Interrupts (Rx) - * - Disable the DMA transfer in the peripheral register (if enabled) - * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) - * - Set handle State to READY - * - At abort completion, call user abort complete callback - * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be - * considered as completed only when user abort complete callback is executed (not when exiting function). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_IRDA_AbortReceive_IT(IRDA_HandleTypeDef *hirda) -{ - /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ - CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); - CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); - - /* Disable the IRDA DMA Rx request if enabled */ - if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) - { - CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); - - /* Abort the IRDA DMA Rx channel : use non blocking DMA Abort API (callback) */ - if (hirda->hdmarx != NULL) - { - /* Set the IRDA DMA Abort callback : - will lead to call HAL_IRDA_AbortCpltCallback() at end of DMA abort procedure */ - hirda->hdmarx->XferAbortCallback = IRDA_DMARxOnlyAbortCallback; - - /* Abort DMA RX */ - if (HAL_DMA_Abort_IT(hirda->hdmarx) != HAL_OK) - { - /* Call Directly hirda->hdmarx->XferAbortCallback function in case of error */ - hirda->hdmarx->XferAbortCallback(hirda->hdmarx); - } - } - else - { - /* Reset Rx transfer counter */ - hirda->RxXferCount = 0U; - - /* Clear the Error flags in the ICR register */ - __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); - - /* Restore hirda->RxState to Ready */ - hirda->RxState = HAL_IRDA_STATE_READY; - - /* As no DMA to be aborted, call directly user Abort complete callback */ -#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) - /* Call registered Abort Receive Complete Callback */ - hirda->AbortReceiveCpltCallback(hirda); -#else - /* Call legacy weak Abort Receive Complete Callback */ - HAL_IRDA_AbortReceiveCpltCallback(hirda); -#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ - } - } - else - { - /* Reset Rx transfer counter */ - hirda->RxXferCount = 0U; - - /* Clear the Error flags in the ICR register */ - __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); - - /* Restore hirda->RxState to Ready */ - hirda->RxState = HAL_IRDA_STATE_READY; - - /* As no DMA to be aborted, call directly user Abort complete callback */ -#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) - /* Call registered Abort Receive Complete Callback */ - hirda->AbortReceiveCpltCallback(hirda); -#else - /* Call legacy weak Abort Receive Complete Callback */ - HAL_IRDA_AbortReceiveCpltCallback(hirda); -#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ - } - - return HAL_OK; -} - -/** - * @brief Handle IRDA interrupt request. - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified IRDA module. - * @retval None - */ -void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda) -{ - uint32_t isrflags = READ_REG(hirda->Instance->ISR); - uint32_t cr1its = READ_REG(hirda->Instance->CR1); - uint32_t cr3its; - uint32_t errorflags; - uint32_t errorcode; - - /* If no error occurs */ - errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE)); - if (errorflags == 0U) - { - /* IRDA in mode Receiver ---------------------------------------------------*/ - if (((isrflags & USART_ISR_RXNE) != 0U) && ((cr1its & USART_CR1_RXNEIE) != 0U)) - { - IRDA_Receive_IT(hirda); - return; - } - } - - /* If some errors occur */ - cr3its = READ_REG(hirda->Instance->CR3); - if ((errorflags != 0U) - && (((cr3its & USART_CR3_EIE) != 0U) - || ((cr1its & (USART_CR1_RXNEIE | USART_CR1_PEIE)) != 0U))) - { - /* IRDA parity error interrupt occurred -------------------------------------*/ - if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) - { - __HAL_IRDA_CLEAR_IT(hirda, IRDA_CLEAR_PEF); - - hirda->ErrorCode |= HAL_IRDA_ERROR_PE; - } - - /* IRDA frame error interrupt occurred --------------------------------------*/ - if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) - { - __HAL_IRDA_CLEAR_IT(hirda, IRDA_CLEAR_FEF); - - hirda->ErrorCode |= HAL_IRDA_ERROR_FE; - } - - /* IRDA noise error interrupt occurred --------------------------------------*/ - if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) - { - __HAL_IRDA_CLEAR_IT(hirda, IRDA_CLEAR_NEF); - - hirda->ErrorCode |= HAL_IRDA_ERROR_NE; - } - - /* IRDA Over-Run interrupt occurred -----------------------------------------*/ - if (((isrflags & USART_ISR_ORE) != 0U) && - (((cr1its & USART_CR1_RXNEIE) != 0U) || ((cr3its & USART_CR3_EIE) != 0U))) - { - __HAL_IRDA_CLEAR_IT(hirda, IRDA_CLEAR_OREF); - - hirda->ErrorCode |= HAL_IRDA_ERROR_ORE; - } - - /* Call IRDA Error Call back function if need be --------------------------*/ - if (hirda->ErrorCode != HAL_IRDA_ERROR_NONE) - { - /* IRDA in mode Receiver ---------------------------------------------------*/ - if (((isrflags & USART_ISR_RXNE) != 0U) && ((cr1its & USART_CR1_RXNEIE) != 0U)) - { - IRDA_Receive_IT(hirda); - } - - /* If Overrun error occurs, or if any error occurs in DMA mode reception, - consider error as blocking */ - errorcode = hirda->ErrorCode; - if ((HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) || - ((errorcode & HAL_IRDA_ERROR_ORE) != 0U)) - { - /* Blocking error : transfer is aborted - Set the IRDA state ready to be able to start again the process, - Disable Rx Interrupts, and disable Rx DMA request, if ongoing */ - IRDA_EndRxTransfer(hirda); - - /* Disable the IRDA DMA Rx request if enabled */ - if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) - { - CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); - - /* Abort the IRDA DMA Rx channel */ - if (hirda->hdmarx != NULL) - { - /* Set the IRDA DMA Abort callback : - will lead to call HAL_IRDA_ErrorCallback() at end of DMA abort procedure */ - hirda->hdmarx->XferAbortCallback = IRDA_DMAAbortOnError; - - /* Abort DMA RX */ - if (HAL_DMA_Abort_IT(hirda->hdmarx) != HAL_OK) - { - /* Call Directly hirda->hdmarx->XferAbortCallback function in case of error */ - hirda->hdmarx->XferAbortCallback(hirda->hdmarx); - } - } - else - { -#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) - /* Call registered user error callback */ - hirda->ErrorCallback(hirda); -#else - /* Call legacy weak user error callback */ - HAL_IRDA_ErrorCallback(hirda); -#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ - } - } - else - { -#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) - /* Call registered user error callback */ - hirda->ErrorCallback(hirda); -#else - /* Call legacy weak user error callback */ - HAL_IRDA_ErrorCallback(hirda); -#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ - } - } - else - { - /* Non Blocking error : transfer could go on. - Error is notified to user through user error callback */ -#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) - /* Call registered user error callback */ - hirda->ErrorCallback(hirda); -#else - /* Call legacy weak user error callback */ - HAL_IRDA_ErrorCallback(hirda); -#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ - hirda->ErrorCode = HAL_IRDA_ERROR_NONE; - } - } - return; - - } /* End if some error occurs */ - - /* IRDA in mode Transmitter ------------------------------------------------*/ - if (((isrflags & USART_ISR_TXE) != 0U) && ((cr1its & USART_CR1_TXEIE) != 0U)) - { - IRDA_Transmit_IT(hirda); - return; - } - - /* IRDA in mode Transmitter (transmission end) -----------------------------*/ - if (((isrflags & USART_ISR_TC) != 0U) && ((cr1its & USART_CR1_TCIE) != 0U)) - { - IRDA_EndTransmit_IT(hirda); - return; - } - -} - -/** - * @brief Tx Transfer completed callback. - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified IRDA module. - * @retval None - */ -__weak void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hirda); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_IRDA_TxCpltCallback can be implemented in the user file. - */ -} - -/** - * @brief Tx Half Transfer completed callback. - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified USART module. - * @retval None - */ -__weak void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hirda); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_IRDA_TxHalfCpltCallback can be implemented in the user file. - */ -} - -/** - * @brief Rx Transfer completed callback. - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified IRDA module. - * @retval None - */ -__weak void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hirda); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_IRDA_RxCpltCallback can be implemented in the user file. - */ -} - -/** - * @brief Rx Half Transfer complete callback. - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified IRDA module. - * @retval None - */ -__weak void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hirda); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_IRDA_RxHalfCpltCallback can be implemented in the user file. - */ -} - -/** - * @brief IRDA error callback. - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified IRDA module. - * @retval None - */ -__weak void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hirda); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_IRDA_ErrorCallback can be implemented in the user file. - */ -} - -/** - * @brief IRDA Abort Complete callback. - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified IRDA module. - * @retval None - */ -__weak void HAL_IRDA_AbortCpltCallback(IRDA_HandleTypeDef *hirda) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hirda); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_IRDA_AbortCpltCallback can be implemented in the user file. - */ -} - -/** - * @brief IRDA Abort Complete callback. - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified IRDA module. - * @retval None - */ -__weak void HAL_IRDA_AbortTransmitCpltCallback(IRDA_HandleTypeDef *hirda) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hirda); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_IRDA_AbortTransmitCpltCallback can be implemented in the user file. - */ -} - -/** - * @brief IRDA Abort Receive Complete callback. - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified IRDA module. - * @retval None - */ -__weak void HAL_IRDA_AbortReceiveCpltCallback(IRDA_HandleTypeDef *hirda) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hirda); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_IRDA_AbortReceiveCpltCallback can be implemented in the user file. - */ -} - -/** - * @} - */ - -/** @defgroup IRDA_Exported_Functions_Group4 Peripheral State and Error functions - * @brief IRDA State and Errors functions - * -@verbatim - ============================================================================== - ##### Peripheral State and Error functions ##### - ============================================================================== - [..] - This subsection provides a set of functions allowing to return the State of IrDA - communication process and also return Peripheral Errors occurred during communication process - (+) HAL_IRDA_GetState() API can be helpful to check in run-time the state - of the IRDA peripheral handle. - (+) HAL_IRDA_GetError() checks in run-time errors that could occur during - communication. - -@endverbatim - * @{ - */ - -/** - * @brief Return the IRDA handle state. - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified IRDA module. - * @retval HAL state - */ -HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda) -{ - /* Return IRDA handle state */ - uint32_t temp1; - uint32_t temp2; - temp1 = (uint32_t)hirda->gState; - temp2 = (uint32_t)hirda->RxState; - - return (HAL_IRDA_StateTypeDef)(temp1 | temp2); -} - -/** - * @brief Return the IRDA handle error code. - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified IRDA module. - * @retval IRDA Error Code - */ -uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda) -{ - return hirda->ErrorCode; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup IRDA_Private_Functions IRDA Private Functions - * @{ - */ - -#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) -/** - * @brief Initialize the callbacks to their default values. - * @param hirda IRDA handle. - * @retval none - */ -void IRDA_InitCallbacksToDefault(IRDA_HandleTypeDef *hirda) -{ - /* Init the IRDA Callback settings */ - hirda->TxHalfCpltCallback = HAL_IRDA_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ - hirda->TxCpltCallback = HAL_IRDA_TxCpltCallback; /* Legacy weak TxCpltCallback */ - hirda->RxHalfCpltCallback = HAL_IRDA_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ - hirda->RxCpltCallback = HAL_IRDA_RxCpltCallback; /* Legacy weak RxCpltCallback */ - hirda->ErrorCallback = HAL_IRDA_ErrorCallback; /* Legacy weak ErrorCallback */ - hirda->AbortCpltCallback = HAL_IRDA_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ - hirda->AbortTransmitCpltCallback = HAL_IRDA_AbortTransmitCpltCallback; /* Legacy weak AbortTransmitCpltCallback */ - hirda->AbortReceiveCpltCallback = HAL_IRDA_AbortReceiveCpltCallback; /* Legacy weak AbortReceiveCpltCallback */ - -} -#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ - -/** - * @brief Configure the IRDA peripheral. - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified IRDA module. - * @retval HAL status - */ -static HAL_StatusTypeDef IRDA_SetConfig(IRDA_HandleTypeDef *hirda) -{ - uint32_t tmpreg; - IRDA_ClockSourceTypeDef clocksource; - HAL_StatusTypeDef ret = HAL_OK; - uint32_t pclk; - - /* Check the communication parameters */ - assert_param(IS_IRDA_BAUDRATE(hirda->Init.BaudRate)); - assert_param(IS_IRDA_WORD_LENGTH(hirda->Init.WordLength)); - assert_param(IS_IRDA_PARITY(hirda->Init.Parity)); - assert_param(IS_IRDA_TX_RX_MODE(hirda->Init.Mode)); - assert_param(IS_IRDA_PRESCALER(hirda->Init.Prescaler)); - assert_param(IS_IRDA_POWERMODE(hirda->Init.PowerMode)); - - /*-------------------------- USART CR1 Configuration -----------------------*/ - /* Configure the IRDA Word Length, Parity and transfer Mode: - Set the M bits according to hirda->Init.WordLength value - Set PCE and PS bits according to hirda->Init.Parity value - Set TE and RE bits according to hirda->Init.Mode value */ - tmpreg = (uint32_t)hirda->Init.WordLength | hirda->Init.Parity | hirda->Init.Mode ; - - MODIFY_REG(hirda->Instance->CR1, IRDA_CR1_FIELDS, tmpreg); - - /*-------------------------- USART CR3 Configuration -----------------------*/ - MODIFY_REG(hirda->Instance->CR3, USART_CR3_IRLP, hirda->Init.PowerMode); - - - /*-------------------------- USART GTPR Configuration ----------------------*/ - MODIFY_REG(hirda->Instance->GTPR, (uint16_t)USART_GTPR_PSC, (uint16_t)hirda->Init.Prescaler); - - /*-------------------------- USART BRR Configuration -----------------------*/ - IRDA_GETCLOCKSOURCE(hirda, clocksource); - tmpreg = 0U; - switch (clocksource) - { - case IRDA_CLOCKSOURCE_PCLK1: - pclk = HAL_RCC_GetPCLK1Freq(); - tmpreg = (uint16_t)(IRDA_DIV_SAMPLING16(pclk, hirda->Init.BaudRate)); - break; - case IRDA_CLOCKSOURCE_HSI: - tmpreg = (uint16_t)(IRDA_DIV_SAMPLING16(HSI_VALUE, hirda->Init.BaudRate)); - break; - case IRDA_CLOCKSOURCE_SYSCLK: - pclk = HAL_RCC_GetSysClockFreq(); - tmpreg = (uint16_t)(IRDA_DIV_SAMPLING16(pclk, hirda->Init.BaudRate)); - break; - case IRDA_CLOCKSOURCE_LSE: - tmpreg = (uint16_t)(IRDA_DIV_SAMPLING16((uint32_t)LSE_VALUE, hirda->Init.BaudRate)); - break; - default: - ret = HAL_ERROR; - break; - } - - /* USARTDIV must be greater than or equal to 0d16 */ - if ((tmpreg >= USART_BRR_MIN) && (tmpreg <= USART_BRR_MAX)) - { - hirda->Instance->BRR = tmpreg; - } - else - { - ret = HAL_ERROR; - } - - return ret; -} - -/** - * @brief Check the IRDA Idle State. - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified IRDA module. - * @retval HAL status - */ -static HAL_StatusTypeDef IRDA_CheckIdleState(IRDA_HandleTypeDef *hirda) -{ - uint32_t tickstart; - - /* Initialize the IRDA ErrorCode */ - hirda->ErrorCode = HAL_IRDA_ERROR_NONE; - - /* Init tickstart for timeout managment*/ - tickstart = HAL_GetTick(); - - /* Check if the Transmitter is enabled */ - if ((hirda->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE) - { - /* Wait until TEACK flag is set */ - if (IRDA_WaitOnFlagUntilTimeout(hirda, USART_ISR_TEACK, RESET, tickstart, IRDA_TEACK_REACK_TIMEOUT) != HAL_OK) - { - /* Timeout occurred */ - return HAL_TIMEOUT; - } - } - /* Check if the Receiver is enabled */ - if ((hirda->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE) - { - /* Wait until REACK flag is set */ - if (IRDA_WaitOnFlagUntilTimeout(hirda, USART_ISR_REACK, RESET, tickstart, IRDA_TEACK_REACK_TIMEOUT) != HAL_OK) - { - /* Timeout occurred */ - return HAL_TIMEOUT; - } - } - - /* Initialize the IRDA state*/ - hirda->gState = HAL_IRDA_STATE_READY; - hirda->RxState = HAL_IRDA_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hirda); - - return HAL_OK; -} - -/** - * @brief Handle IRDA Communication Timeout. - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified IRDA module. - * @param Flag Specifies the IRDA flag to check. - * @param Status Flag status (SET or RESET) - * @param Tickstart Tick start value - * @param Timeout Timeout duration - * @retval HAL status - */ -static HAL_StatusTypeDef IRDA_WaitOnFlagUntilTimeout(IRDA_HandleTypeDef *hirda, uint32_t Flag, FlagStatus Status, - uint32_t Tickstart, uint32_t Timeout) -{ - /* Wait until flag is set */ - while ((__HAL_IRDA_GET_FLAG(hirda, Flag) ? SET : RESET) == Status) - { - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) - { - /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ - CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE)); - CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); - - hirda->gState = HAL_IRDA_STATE_READY; - hirda->RxState = HAL_IRDA_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hirda); - return HAL_TIMEOUT; - } - } - } - return HAL_OK; -} - - -/** - * @brief End ongoing Tx transfer on IRDA peripheral (following error detection or Transmit completion). - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified IRDA module. - * @retval None - */ -static void IRDA_EndTxTransfer(IRDA_HandleTypeDef *hirda) -{ - /* Disable TXEIE and TCIE interrupts */ - CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); - - /* At end of Tx process, restore hirda->gState to Ready */ - hirda->gState = HAL_IRDA_STATE_READY; -} - - -/** - * @brief End ongoing Rx transfer on UART peripheral (following error detection or Reception completion). - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified IRDA module. - * @retval None - */ -static void IRDA_EndRxTransfer(IRDA_HandleTypeDef *hirda) -{ - /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ - CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); - CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); - - /* At end of Rx process, restore hirda->RxState to Ready */ - hirda->RxState = HAL_IRDA_STATE_READY; -} - - -/** - * @brief DMA IRDA transmit process complete callback. - * @param hdma Pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void IRDA_DMATransmitCplt(DMA_HandleTypeDef *hdma) -{ - IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); - - /* DMA Normal mode */ - if (HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC)) - { - hirda->TxXferCount = 0U; - - /* Disable the DMA transfer for transmit request by resetting the DMAT bit - in the IRDA CR3 register */ - CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); - - /* Enable the IRDA Transmit Complete Interrupt */ - SET_BIT(hirda->Instance->CR1, USART_CR1_TCIE); - } - /* DMA Circular mode */ - else - { -#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) - /* Call registered Tx complete callback */ - hirda->TxCpltCallback(hirda); -#else - /* Call legacy weak Tx complete callback */ - HAL_IRDA_TxCpltCallback(hirda); -#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ - } - -} - -/** - * @brief DMA IRDA transmit process half complete callback. - * @param hdma Pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void IRDA_DMATransmitHalfCplt(DMA_HandleTypeDef *hdma) -{ - IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); - -#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) - /* Call registered Tx Half complete callback */ - hirda->TxHalfCpltCallback(hirda); -#else - /* Call legacy weak Tx complete callback */ - HAL_IRDA_TxHalfCpltCallback(hirda); -#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ -} - -/** - * @brief DMA IRDA receive process complete callback. - * @param hdma Pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void IRDA_DMAReceiveCplt(DMA_HandleTypeDef *hdma) -{ - IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); - - /* DMA Normal mode */ - if (HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC)) - { - hirda->RxXferCount = 0U; - - /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ - CLEAR_BIT(hirda->Instance->CR1, USART_CR1_PEIE); - CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); - - /* Disable the DMA transfer for the receiver request by resetting the DMAR bit - in the IRDA CR3 register */ - CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); - - /* At end of Rx process, restore hirda->RxState to Ready */ - hirda->RxState = HAL_IRDA_STATE_READY; - } - -#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) - /* Call registered Rx complete callback */ - hirda->RxCpltCallback(hirda); -#else - /* Call legacy weak Rx complete callback */ - HAL_IRDA_RxCpltCallback(hirda); -#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA IRDA receive process half complete callback. - * @param hdma Pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void IRDA_DMAReceiveHalfCplt(DMA_HandleTypeDef *hdma) -{ - IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); - -#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) - /*Call registered Rx Half complete callback*/ - hirda->RxHalfCpltCallback(hirda); -#else - /* Call legacy weak Rx Half complete callback */ - HAL_IRDA_RxHalfCpltCallback(hirda); -#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ -} - -/** - * @brief DMA IRDA communication error callback. - * @param hdma Pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void IRDA_DMAError(DMA_HandleTypeDef *hdma) -{ - IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); - - /* Stop IRDA DMA Tx request if ongoing */ - if (hirda->gState == HAL_IRDA_STATE_BUSY_TX) - { - if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) - { - hirda->TxXferCount = 0U; - IRDA_EndTxTransfer(hirda); - } - } - - /* Stop IRDA DMA Rx request if ongoing */ - if (hirda->RxState == HAL_IRDA_STATE_BUSY_RX) - { - if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) - { - hirda->RxXferCount = 0U; - IRDA_EndRxTransfer(hirda); - } - } - - hirda->ErrorCode |= HAL_IRDA_ERROR_DMA; -#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) - /* Call registered user error callback */ - hirda->ErrorCallback(hirda); -#else - /* Call legacy weak user error callback */ - HAL_IRDA_ErrorCallback(hirda); -#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ -} - -/** - * @brief DMA IRDA communication abort callback, when initiated by HAL services on Error - * (To be called at end of DMA Abort procedure following error occurrence). - * @param hdma DMA handle. - * @retval None - */ -static void IRDA_DMAAbortOnError(DMA_HandleTypeDef *hdma) -{ - IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); - hirda->RxXferCount = 0U; - hirda->TxXferCount = 0U; - -#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) - /* Call registered user error callback */ - hirda->ErrorCallback(hirda); -#else - /* Call legacy weak user error callback */ - HAL_IRDA_ErrorCallback(hirda); -#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ -} - -/** - * @brief DMA IRDA Tx communication abort callback, when initiated by user - * (To be called at end of DMA Tx Abort procedure following user abort request). - * @note When this callback is executed, User Abort complete call back is called only if no - * Abort still ongoing for Rx DMA Handle. - * @param hdma DMA handle. - * @retval None - */ -static void IRDA_DMATxAbortCallback(DMA_HandleTypeDef *hdma) -{ - IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); - - hirda->hdmatx->XferAbortCallback = NULL; - - /* Check if an Abort process is still ongoing */ - if (hirda->hdmarx != NULL) - { - if (hirda->hdmarx->XferAbortCallback != NULL) - { - return; - } - } - - /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ - hirda->TxXferCount = 0U; - hirda->RxXferCount = 0U; - - /* Reset errorCode */ - hirda->ErrorCode = HAL_IRDA_ERROR_NONE; - - /* Clear the Error flags in the ICR register */ - __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); - - /* Restore hirda->gState and hirda->RxState to Ready */ - hirda->gState = HAL_IRDA_STATE_READY; - hirda->RxState = HAL_IRDA_STATE_READY; - - /* Call user Abort complete callback */ -#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) - /* Call registered Abort complete callback */ - hirda->AbortCpltCallback(hirda); -#else - /* Call legacy weak Abort complete callback */ - HAL_IRDA_AbortCpltCallback(hirda); -#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ -} - - -/** - * @brief DMA IRDA Rx communication abort callback, when initiated by user - * (To be called at end of DMA Rx Abort procedure following user abort request). - * @note When this callback is executed, User Abort complete call back is called only if no - * Abort still ongoing for Tx DMA Handle. - * @param hdma DMA handle. - * @retval None - */ -static void IRDA_DMARxAbortCallback(DMA_HandleTypeDef *hdma) -{ - IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); - - hirda->hdmarx->XferAbortCallback = NULL; - - /* Check if an Abort process is still ongoing */ - if (hirda->hdmatx != NULL) - { - if (hirda->hdmatx->XferAbortCallback != NULL) - { - return; - } - } - - /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ - hirda->TxXferCount = 0U; - hirda->RxXferCount = 0U; - - /* Reset errorCode */ - hirda->ErrorCode = HAL_IRDA_ERROR_NONE; - - /* Clear the Error flags in the ICR register */ - __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); - - /* Restore hirda->gState and hirda->RxState to Ready */ - hirda->gState = HAL_IRDA_STATE_READY; - hirda->RxState = HAL_IRDA_STATE_READY; - - /* Call user Abort complete callback */ -#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) - /* Call registered Abort complete callback */ - hirda->AbortCpltCallback(hirda); -#else - /* Call legacy weak Abort complete callback */ - HAL_IRDA_AbortCpltCallback(hirda); -#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ -} - - -/** - * @brief DMA IRDA Tx communication abort callback, when initiated by user by a call to - * HAL_IRDA_AbortTransmit_IT API (Abort only Tx transfer) - * (This callback is executed at end of DMA Tx Abort procedure following user abort request, - * and leads to user Tx Abort Complete callback execution). - * @param hdma DMA handle. - * @retval None - */ -static void IRDA_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma) -{ - IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); - - hirda->TxXferCount = 0U; - - /* Restore hirda->gState to Ready */ - hirda->gState = HAL_IRDA_STATE_READY; - - /* Call user Abort complete callback */ -#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) - /* Call registered Abort Transmit Complete Callback */ - hirda->AbortTransmitCpltCallback(hirda); -#else - /* Call legacy weak Abort Transmit Complete Callback */ - HAL_IRDA_AbortTransmitCpltCallback(hirda); -#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ -} - -/** - * @brief DMA IRDA Rx communication abort callback, when initiated by user by a call to - * HAL_IRDA_AbortReceive_IT API (Abort only Rx transfer) - * (This callback is executed at end of DMA Rx Abort procedure following user abort request, - * and leads to user Rx Abort Complete callback execution). - * @param hdma DMA handle. - * @retval None - */ -static void IRDA_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma) -{ - IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - hirda->RxXferCount = 0U; - - /* Clear the Error flags in the ICR register */ - __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); - - /* Restore hirda->RxState to Ready */ - hirda->RxState = HAL_IRDA_STATE_READY; - - /* Call user Abort complete callback */ -#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) - /* Call registered Abort Receive Complete Callback */ - hirda->AbortReceiveCpltCallback(hirda); -#else - /* Call legacy weak Abort Receive Complete Callback */ - HAL_IRDA_AbortReceiveCpltCallback(hirda); -#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ -} - -/** - * @brief Send an amount of data in interrupt mode. - * @note Function is called under interruption only, once - * interruptions have been enabled by HAL_IRDA_Transmit_IT(). - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified IRDA module. - * @retval None - */ -static void IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda) -{ - uint16_t *tmp; - - /* Check that a Tx process is ongoing */ - if (hirda->gState == HAL_IRDA_STATE_BUSY_TX) - { - if (hirda->TxXferCount == 0U) - { - /* Disable the IRDA Transmit Data Register Empty Interrupt */ - CLEAR_BIT(hirda->Instance->CR1, USART_CR1_TXEIE); - - /* Enable the IRDA Transmit Complete Interrupt */ - SET_BIT(hirda->Instance->CR1, USART_CR1_TCIE); - } - else - { - if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) - { - tmp = (uint16_t *) hirda->pTxBuffPtr; /* Derogation R.11.3 */ - hirda->Instance->TDR = (uint16_t)(*tmp & 0x01FFU); - hirda->pTxBuffPtr += 2U; - } - else - { - hirda->Instance->TDR = (uint8_t)(*hirda->pTxBuffPtr & 0xFFU); - hirda->pTxBuffPtr++; - } - hirda->TxXferCount--; - } - } -} - -/** - * @brief Wrap up transmission in non-blocking mode. - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified IRDA module. - * @retval None - */ -static void IRDA_EndTransmit_IT(IRDA_HandleTypeDef *hirda) -{ - /* Disable the IRDA Transmit Complete Interrupt */ - CLEAR_BIT(hirda->Instance->CR1, USART_CR1_TCIE); - - /* Tx process is ended, restore hirda->gState to Ready */ - hirda->gState = HAL_IRDA_STATE_READY; - -#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) - /* Call registered Tx complete callback */ - hirda->TxCpltCallback(hirda); -#else - /* Call legacy weak Tx complete callback */ - HAL_IRDA_TxCpltCallback(hirda); -#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ -} - -/** - * @brief Receive an amount of data in interrupt mode. - * @note Function is called under interruption only, once - * interruptions have been enabled by HAL_IRDA_Receive_IT() - * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains - * the configuration information for the specified IRDA module. - * @retval None - */ -static void IRDA_Receive_IT(IRDA_HandleTypeDef *hirda) -{ - uint16_t *tmp; - uint16_t uhMask = hirda->Mask; - uint16_t uhdata; - - /* Check that a Rx process is ongoing */ - if (hirda->RxState == HAL_IRDA_STATE_BUSY_RX) - { - uhdata = (uint16_t) READ_REG(hirda->Instance->RDR); - if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) - { - tmp = (uint16_t *) hirda->pRxBuffPtr; /* Derogation R.11.3 */ - *tmp = (uint16_t)(uhdata & uhMask); - hirda->pRxBuffPtr += 2U; - } - else - { - *hirda->pRxBuffPtr = (uint8_t)(uhdata & (uint8_t)uhMask); - hirda->pRxBuffPtr++; - } - - hirda->RxXferCount--; - if (hirda->RxXferCount == 0U) - { - /* Disable the IRDA Parity Error Interrupt and RXNE interrupt */ - CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); - - /* Disable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */ - CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); - - /* Rx process is completed, restore hirda->RxState to Ready */ - hirda->RxState = HAL_IRDA_STATE_READY; - -#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) - /* Call registered Rx complete callback */ - hirda->RxCpltCallback(hirda); -#else - /* Call legacy weak Rx complete callback */ - HAL_IRDA_RxCpltCallback(hirda); -#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ - } - } - else - { - /* Clear RXNE interrupt flag */ - __HAL_IRDA_SEND_REQ(hirda, IRDA_RXDATA_FLUSH_REQUEST); - } -} - -/** - * @} - */ - -#endif /* HAL_IRDA_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ -#endif /* USART_IRDA_SUPPORT */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit