From 94f94260ace13688285fc8c62687079b26c18854 Mon Sep 17 00:00:00 2001 From: jaseg Date: Sun, 20 Dec 2020 15:18:02 +0100 Subject: Submodule-cache WIP --- .../Src/stm32f0xx_hal_i2c_ex.c | 333 --------------------- 1 file changed, 333 deletions(-) delete mode 100644 fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c (limited to 'fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c') diff --git a/fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c b/fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c deleted file mode 100644 index 9dd3af2..0000000 --- a/fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c +++ /dev/null @@ -1,333 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f0xx_hal_i2c_ex.c - * @author MCD Application Team - * @brief I2C Extended HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of I2C Extended peripheral: - * + Extended features functions - * - @verbatim - ============================================================================== - ##### I2C peripheral Extended features ##### - ============================================================================== - - [..] Comparing to other previous devices, the I2C interface for STM32F0xx - devices contains the following additional features - - (+) Possibility to disable or enable Analog Noise Filter - (+) Use of a configured Digital Noise Filter - (+) Disable or enable wakeup from Stop mode(s) - (+) Disable or enable Fast Mode Plus - - ##### How to use this driver ##### - ============================================================================== - [..] This driver provides functions to configure Noise Filter and Wake Up Feature - (#) Configure I2C Analog noise filter using the function HAL_I2CEx_ConfigAnalogFilter() - (#) Configure I2C Digital noise filter using the function HAL_I2CEx_ConfigDigitalFilter() - (#) Configure the enable or disable of I2C Wake Up Mode using the functions : - (++) HAL_I2CEx_EnableWakeUp() - (++) HAL_I2CEx_DisableWakeUp() - (#) Configure the enable or disable of fast mode plus driving capability using the functions : - (++) HAL_I2CEx_EnableFastModePlus() - (++) HAL_I2CEx_DisableFastModePlus() - @endverbatim - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f0xx_hal.h" - -/** @addtogroup STM32F0xx_HAL_Driver - * @{ - */ - -/** @defgroup I2CEx I2CEx - * @brief I2C Extended HAL module driver - * @{ - */ - -#ifdef HAL_I2C_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup I2CEx_Exported_Functions I2C Extended Exported Functions - * @{ - */ - -/** @defgroup I2CEx_Exported_Functions_Group1 Extended features functions - * @brief Extended features functions - * -@verbatim - =============================================================================== - ##### Extended features functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Configure Noise Filters - (+) Configure Wake Up Feature - (+) Configure Fast Mode Plus - -@endverbatim - * @{ - */ - -/** - * @brief Configure I2C Analog noise filter. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2Cx peripheral. - * @param AnalogFilter New state of the Analog filter. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); - assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY; - - /* Disable the selected I2C peripheral */ - __HAL_I2C_DISABLE(hi2c); - - /* Reset I2Cx ANOFF bit */ - hi2c->Instance->CR1 &= ~(I2C_CR1_ANFOFF); - - /* Set analog filter bit*/ - hi2c->Instance->CR1 |= AnalogFilter; - - __HAL_I2C_ENABLE(hi2c); - - hi2c->State = HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Configure I2C Digital noise filter. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2Cx peripheral. - * @param DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter) -{ - uint32_t tmpreg; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); - assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY; - - /* Disable the selected I2C peripheral */ - __HAL_I2C_DISABLE(hi2c); - - /* Get the old register value */ - tmpreg = hi2c->Instance->CR1; - - /* Reset I2Cx DNF bits [11:8] */ - tmpreg &= ~(I2C_CR1_DNF); - - /* Set I2Cx DNF coefficient */ - tmpreg |= DigitalFilter << 8U; - - /* Store the new register value */ - hi2c->Instance->CR1 = tmpreg; - - __HAL_I2C_ENABLE(hi2c); - - hi2c->State = HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} -#if defined(I2C_CR1_WUPEN) - -/** - * @brief Enable I2C wakeup from Stop mode(s). - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2Cx peripheral. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c) -{ - /* Check the parameters */ - assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY; - - /* Disable the selected I2C peripheral */ - __HAL_I2C_DISABLE(hi2c); - - /* Enable wakeup from stop mode */ - hi2c->Instance->CR1 |= I2C_CR1_WUPEN; - - __HAL_I2C_ENABLE(hi2c); - - hi2c->State = HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Disable I2C wakeup from Stop mode(s). - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2Cx peripheral. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c) -{ - /* Check the parameters */ - assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY; - - /* Disable the selected I2C peripheral */ - __HAL_I2C_DISABLE(hi2c); - - /* Enable wakeup from stop mode */ - hi2c->Instance->CR1 &= ~(I2C_CR1_WUPEN); - - __HAL_I2C_ENABLE(hi2c); - - hi2c->State = HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} -#endif - -/** - * @brief Enable the I2C fast mode plus driving capability. - * @param ConfigFastModePlus Selects the pin. - * This parameter can be one of the @ref I2CEx_FastModePlus values - * @note For I2C1, fast mode plus driving capability can be enabled on all selected - * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently - * on each one of the following pins PB6, PB7, PB8 and PB9. - * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability - * can be enabled only by using I2C_FASTMODEPLUS_I2C1 parameter. - * @note For all I2C2 pins fast mode plus driving capability can be enabled - * only by using I2C_FASTMODEPLUS_I2C2 parameter. - * @retval None - */ -void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus) -{ - /* Check the parameter */ - assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus)); - - /* Enable SYSCFG clock */ - __HAL_RCC_SYSCFG_CLK_ENABLE(); - - /* Enable fast mode plus driving capability for selected pin */ - SET_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus); -} - -/** - * @brief Disable the I2C fast mode plus driving capability. - * @param ConfigFastModePlus Selects the pin. - * This parameter can be one of the @ref I2CEx_FastModePlus values - * @note For I2C1, fast mode plus driving capability can be disabled on all selected - * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently - * on each one of the following pins PB6, PB7, PB8 and PB9. - * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability - * can be disabled only by using I2C_FASTMODEPLUS_I2C1 parameter. - * @note For all I2C2 pins fast mode plus driving capability can be disabled - * only by using I2C_FASTMODEPLUS_I2C2 parameter. - * @retval None - */ -void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus) -{ - /* Check the parameter */ - assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus)); - - /* Enable SYSCFG clock */ - __HAL_RCC_SYSCFG_CLK_ENABLE(); - - /* Disable fast mode plus driving capability for selected pin */ - CLEAR_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus); -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_I2C_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit