From 94f94260ace13688285fc8c62687079b26c18854 Mon Sep 17 00:00:00 2001 From: jaseg Date: Sun, 20 Dec 2020 15:18:02 +0100 Subject: Submodule-cache WIP --- .../STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_crc.c | 520 --------------------- 1 file changed, 520 deletions(-) delete mode 100644 fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_crc.c (limited to 'fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_crc.c') diff --git a/fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_crc.c b/fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_crc.c deleted file mode 100644 index f78e66b..0000000 --- a/fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_crc.c +++ /dev/null @@ -1,520 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f0xx_hal_crc.c - * @author MCD Application Team - * @brief CRC HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Cyclic Redundancy Check (CRC) peripheral: - * + Initialization and de-initialization functions - * + Peripheral Control functions - * + Peripheral State functions - * - @verbatim - =============================================================================== - ##### How to use this driver ##### - =============================================================================== - [..] - (+) Enable CRC AHB clock using __HAL_RCC_CRC_CLK_ENABLE(); - (+) Initialize CRC calculator - (++) specify generating polynomial (peripheral default or non-default one) - (++) specify initialization value (peripheral default or non-default one) - (++) specify input data format - (++) specify input or output data inversion mode if any - (+) Use HAL_CRC_Accumulate() function to compute the CRC value of the - input data buffer starting with the previously computed CRC as - initialization value - (+) Use HAL_CRC_Calculate() function to compute the CRC value of the - input data buffer starting with the defined initialization value - (default or non-default) to initiate CRC calculation - - @endverbatim - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f0xx_hal.h" - -/** @addtogroup STM32F0xx_HAL_Driver - * @{ - */ - -/** @defgroup CRC CRC - * @brief CRC HAL module driver. - * @{ - */ - -#ifdef HAL_CRC_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @defgroup CRC_Private_Functions CRC Private Functions - * @{ - */ -static uint32_t CRC_Handle_8(CRC_HandleTypeDef *hcrc, uint8_t pBuffer[], uint32_t BufferLength); -static uint32_t CRC_Handle_16(CRC_HandleTypeDef *hcrc, uint16_t pBuffer[], uint32_t BufferLength); -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup CRC_Exported_Functions CRC Exported Functions - * @{ - */ - -/** @defgroup CRC_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions. - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Initialize the CRC according to the specified parameters - in the CRC_InitTypeDef and create the associated handle - (+) DeInitialize the CRC peripheral - (+) Initialize the CRC MSP (MCU Specific Package) - (+) DeInitialize the CRC MSP - -@endverbatim - * @{ - */ - -/** - * @brief Initialize the CRC according to the specified - * parameters in the CRC_InitTypeDef and create the associated handle. - * @param hcrc CRC handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc) -{ - /* Check the CRC handle allocation */ - if (hcrc == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance)); - - if (hcrc->State == HAL_CRC_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hcrc->Lock = HAL_UNLOCKED; - /* Init the low level hardware */ - HAL_CRC_MspInit(hcrc); - } - - hcrc->State = HAL_CRC_STATE_BUSY; - -#if defined(CRC_POL_POL) - /* check whether or not non-default generating polynomial has been - * picked up by user */ - assert_param(IS_DEFAULT_POLYNOMIAL(hcrc->Init.DefaultPolynomialUse)); - if (hcrc->Init.DefaultPolynomialUse == DEFAULT_POLYNOMIAL_ENABLE) - { - /* initialize peripheral with default generating polynomial */ - WRITE_REG(hcrc->Instance->POL, DEFAULT_CRC32_POLY); - MODIFY_REG(hcrc->Instance->CR, CRC_CR_POLYSIZE, CRC_POLYLENGTH_32B); - } - else - { - /* initialize CRC peripheral with generating polynomial defined by user */ - if (HAL_CRCEx_Polynomial_Set(hcrc, hcrc->Init.GeneratingPolynomial, hcrc->Init.CRCLength) != HAL_OK) - { - return HAL_ERROR; - } - } -#endif /* CRC_POL_POL */ - - /* check whether or not non-default CRC initial value has been - * picked up by user */ - assert_param(IS_DEFAULT_INIT_VALUE(hcrc->Init.DefaultInitValueUse)); - if (hcrc->Init.DefaultInitValueUse == DEFAULT_INIT_VALUE_ENABLE) - { - WRITE_REG(hcrc->Instance->INIT, DEFAULT_CRC_INITVALUE); - } - else - { - WRITE_REG(hcrc->Instance->INIT, hcrc->Init.InitValue); - } - - - /* set input data inversion mode */ - assert_param(IS_CRC_INPUTDATA_INVERSION_MODE(hcrc->Init.InputDataInversionMode)); - MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_IN, hcrc->Init.InputDataInversionMode); - - /* set output data inversion mode */ - assert_param(IS_CRC_OUTPUTDATA_INVERSION_MODE(hcrc->Init.OutputDataInversionMode)); - MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_OUT, hcrc->Init.OutputDataInversionMode); - - /* makes sure the input data format (bytes, halfwords or words stream) - * is properly specified by user */ - assert_param(IS_CRC_INPUTDATA_FORMAT(hcrc->InputDataFormat)); - - /* Change CRC peripheral state */ - hcrc->State = HAL_CRC_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief DeInitialize the CRC peripheral. - * @param hcrc CRC handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_CRC_DeInit(CRC_HandleTypeDef *hcrc) -{ - /* Check the CRC handle allocation */ - if (hcrc == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance)); - - /* Check the CRC peripheral state */ - if (hcrc->State == HAL_CRC_STATE_BUSY) - { - return HAL_BUSY; - } - - /* Change CRC peripheral state */ - hcrc->State = HAL_CRC_STATE_BUSY; - - /* Reset CRC calculation unit */ - __HAL_CRC_DR_RESET(hcrc); - - /* Reset IDR register content */ - CLEAR_BIT(hcrc->Instance->IDR, CRC_IDR_IDR); - - /* DeInit the low level hardware */ - HAL_CRC_MspDeInit(hcrc); - - /* Change CRC peripheral state */ - hcrc->State = HAL_CRC_STATE_RESET; - - /* Process unlocked */ - __HAL_UNLOCK(hcrc); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Initializes the CRC MSP. - * @param hcrc CRC handle - * @retval None - */ -__weak void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hcrc); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_CRC_MspInit can be implemented in the user file - */ -} - -/** - * @brief DeInitialize the CRC MSP. - * @param hcrc CRC handle - * @retval None - */ -__weak void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hcrc); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_CRC_MspDeInit can be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup CRC_Exported_Functions_Group2 Peripheral Control functions - * @brief management functions. - * -@verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer - using combination of the previous CRC value and the new one. - - [..] or - - (+) compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer - independently of the previous CRC value. - -@endverbatim - * @{ - */ - -/** - * @brief Compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer - * starting with the previously computed CRC as initialization value. - * @param hcrc CRC handle - * @param pBuffer pointer to the input data buffer, exact input data format is - * provided by hcrc->InputDataFormat. - * @param BufferLength input data buffer length (number of bytes if pBuffer - * type is * uint8_t, number of half-words if pBuffer type is * uint16_t, - * number of words if pBuffer type is * uint32_t). - * @note By default, the API expects a uint32_t pointer as input buffer parameter. - * Input buffer pointers with other types simply need to be cast in uint32_t - * and the API will internally adjust its input data processing based on the - * handle field hcrc->InputDataFormat. - * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits) - */ -uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength) -{ - uint32_t index; /* CRC input data buffer index */ - uint32_t temp = 0U; /* CRC output (read from hcrc->Instance->DR register) */ - - /* Change CRC peripheral state */ - hcrc->State = HAL_CRC_STATE_BUSY; - - switch (hcrc->InputDataFormat) - { - case CRC_INPUTDATA_FORMAT_WORDS: - /* Enter Data to the CRC calculator */ - for (index = 0U; index < BufferLength; index++) - { - hcrc->Instance->DR = pBuffer[index]; - } - temp = hcrc->Instance->DR; - break; - - case CRC_INPUTDATA_FORMAT_BYTES: - temp = CRC_Handle_8(hcrc, (uint8_t *)pBuffer, BufferLength); - break; - - case CRC_INPUTDATA_FORMAT_HALFWORDS: - temp = CRC_Handle_16(hcrc, (uint16_t *)(void *)pBuffer, BufferLength); /* Derogation MisraC2012 R.11.5 */ - break; - default: - break; - } - - /* Change CRC peripheral state */ - hcrc->State = HAL_CRC_STATE_READY; - - /* Return the CRC computed value */ - return temp; -} - -/** - * @brief Compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer - * starting with hcrc->Instance->INIT as initialization value. - * @param hcrc CRC handle - * @param pBuffer pointer to the input data buffer, exact input data format is - * provided by hcrc->InputDataFormat. - * @param BufferLength input data buffer length (number of bytes if pBuffer - * type is * uint8_t, number of half-words if pBuffer type is * uint16_t, - * number of words if pBuffer type is * uint32_t). - * @note By default, the API expects a uint32_t pointer as input buffer parameter. - * Input buffer pointers with other types simply need to be cast in uint32_t - * and the API will internally adjust its input data processing based on the - * handle field hcrc->InputDataFormat. - * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits) - */ -uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength) -{ - uint32_t index; /* CRC input data buffer index */ - uint32_t temp = 0U; /* CRC output (read from hcrc->Instance->DR register) */ - - /* Change CRC peripheral state */ - hcrc->State = HAL_CRC_STATE_BUSY; - - /* Reset CRC Calculation Unit (hcrc->Instance->INIT is - * written in hcrc->Instance->DR) */ - __HAL_CRC_DR_RESET(hcrc); - - switch (hcrc->InputDataFormat) - { - case CRC_INPUTDATA_FORMAT_WORDS: - /* Enter 32-bit input data to the CRC calculator */ - for (index = 0U; index < BufferLength; index++) - { - hcrc->Instance->DR = pBuffer[index]; - } - temp = hcrc->Instance->DR; - break; - - case CRC_INPUTDATA_FORMAT_BYTES: - /* Specific 8-bit input data handling */ - temp = CRC_Handle_8(hcrc, (uint8_t *)pBuffer, BufferLength); - break; - - case CRC_INPUTDATA_FORMAT_HALFWORDS: - /* Specific 16-bit input data handling */ - temp = CRC_Handle_16(hcrc, (uint16_t *)(void *)pBuffer, BufferLength); /* Derogation MisraC2012 R.11.5 */ - break; - - default: - break; - } - - /* Change CRC peripheral state */ - hcrc->State = HAL_CRC_STATE_READY; - - /* Return the CRC computed value */ - return temp; -} - -/** - * @} - */ - -/** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions - * @brief Peripheral State functions. - * -@verbatim - =============================================================================== - ##### Peripheral State functions ##### - =============================================================================== - [..] - This subsection permits to get in run-time the status of the peripheral. - -@endverbatim - * @{ - */ - -/** - * @brief Return the CRC handle state. - * @param hcrc CRC handle - * @retval HAL state - */ -HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc) -{ - /* Return CRC handle state */ - return hcrc->State; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup CRC_Private_Functions - * @{ - */ - -/** - * @brief Enter 8-bit input data to the CRC calculator. - * Specific data handling to optimize processing time. - * @param hcrc CRC handle - * @param pBuffer pointer to the input data buffer - * @param BufferLength input data buffer length - * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits) - */ -static uint32_t CRC_Handle_8(CRC_HandleTypeDef *hcrc, uint8_t pBuffer[], uint32_t BufferLength) -{ - uint32_t i; /* input data buffer index */ - uint16_t data; - __IO uint16_t *pReg; - - /* Processing time optimization: 4 bytes are entered in a row with a single word write, - * last bytes must be carefully fed to the CRC calculator to ensure a correct type - * handling by the peripheral */ - for (i = 0U; i < (BufferLength / 4U); i++) - { - hcrc->Instance->DR = ((uint32_t)pBuffer[4U * i] << 24U) | \ - ((uint32_t)pBuffer[(4U * i) + 1U] << 16U) | \ - ((uint32_t)pBuffer[(4U * i) + 2U] << 8U) | \ - (uint32_t)pBuffer[(4U * i) + 3U]; - } - /* last bytes specific handling */ - if ((BufferLength % 4U) != 0U) - { - if ((BufferLength % 4U) == 1U) - { - *(__IO uint8_t *)(__IO void *)(&hcrc->Instance->DR) = pBuffer[4U * i]; /* Derogation MisraC2012 R.11.5 */ - } - if ((BufferLength % 4U) == 2U) - { - data = ((uint16_t)(pBuffer[4U * i]) << 8U) | (uint16_t)pBuffer[(4U * i) + 1U]; - pReg = (__IO uint16_t *)(__IO void *)(&hcrc->Instance->DR); /* Derogation MisraC2012 R.11.5 */ - *pReg = data; - } - if ((BufferLength % 4U) == 3U) - { - data = ((uint16_t)(pBuffer[4U * i]) << 8U) | (uint16_t)pBuffer[(4U * i) + 1U]; - pReg = (__IO uint16_t *)(__IO void *)(&hcrc->Instance->DR); /* Derogation MisraC2012 R.11.5 */ - *pReg = data; - - *(__IO uint8_t *)(__IO void *)(&hcrc->Instance->DR) = pBuffer[(4U * i) + 2U]; /* Derogation MisraC2012 R.11.5 */ - } - } - - /* Return the CRC computed value */ - return hcrc->Instance->DR; -} - -/** - * @brief Enter 16-bit input data to the CRC calculator. - * Specific data handling to optimize processing time. - * @param hcrc CRC handle - * @param pBuffer pointer to the input data buffer - * @param BufferLength input data buffer length - * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits) - */ -static uint32_t CRC_Handle_16(CRC_HandleTypeDef *hcrc, uint16_t pBuffer[], uint32_t BufferLength) -{ - uint32_t i; /* input data buffer index */ - __IO uint16_t *pReg; - - /* Processing time optimization: 2 HalfWords are entered in a row with a single word write, - * in case of odd length, last HalfWord must be carefully fed to the CRC calculator to ensure - * a correct type handling by the peripheral */ - for (i = 0U; i < (BufferLength / 2U); i++) - { - hcrc->Instance->DR = ((uint32_t)pBuffer[2U * i] << 16U) | (uint32_t)pBuffer[(2U * i) + 1U]; - } - if ((BufferLength % 2U) != 0U) - { - pReg = (__IO uint16_t *)(__IO void *)(&hcrc->Instance->DR); /* Derogation MisraC2012 R.11.5 */ - *pReg = pBuffer[2U * i]; - } - - /* Return the CRC computed value */ - return hcrc->Instance->DR; -} - -/** - * @} - */ - -#endif /* HAL_CRC_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit