From 6ab94e0b318884bbcb95e2ea3835f951502e1d99 Mon Sep 17 00:00:00 2001 From: jaseg Date: Wed, 14 Oct 2020 12:47:28 +0200 Subject: Move firmware into subdirectory --- .../STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_spi.h | 854 +++++++++++++++++++++ 1 file changed, 854 insertions(+) create mode 100644 fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_spi.h (limited to 'fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_spi.h') diff --git a/fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_spi.h b/fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_spi.h new file mode 100644 index 0000000..5d3e7a4 --- /dev/null +++ b/fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_spi.h @@ -0,0 +1,854 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_spi.h + * @author MCD Application Team + * @brief Header file of SPI HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F0xx_HAL_SPI_H +#define STM32F0xx_HAL_SPI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup SPI + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SPI_Exported_Types SPI Exported Types + * @{ + */ + +/** + * @brief SPI Configuration Structure definition + */ +typedef struct +{ + uint32_t Mode; /*!< Specifies the SPI operating mode. + This parameter can be a value of @ref SPI_Mode */ + + uint32_t Direction; /*!< Specifies the SPI bidirectional mode state. + This parameter can be a value of @ref SPI_Direction */ + + uint32_t DataSize; /*!< Specifies the SPI data size. + This parameter can be a value of @ref SPI_Data_Size */ + + uint32_t CLKPolarity; /*!< Specifies the serial clock steady state. + This parameter can be a value of @ref SPI_Clock_Polarity */ + + uint32_t CLKPhase; /*!< Specifies the clock active edge for the bit capture. + This parameter can be a value of @ref SPI_Clock_Phase */ + + uint32_t NSS; /*!< Specifies whether the NSS signal is managed by + hardware (NSS pin) or by software using the SSI bit. + This parameter can be a value of @ref SPI_Slave_Select_management */ + + uint32_t BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be + used to configure the transmit and receive SCK clock. + This parameter can be a value of @ref SPI_BaudRate_Prescaler + @note The communication clock is derived from the master + clock. The slave clock does not need to be set. */ + + uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit. + This parameter can be a value of @ref SPI_MSB_LSB_transmission */ + + uint32_t TIMode; /*!< Specifies if the TI mode is enabled or not. + This parameter can be a value of @ref SPI_TI_mode */ + + uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not. + This parameter can be a value of @ref SPI_CRC_Calculation */ + + uint32_t CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation. + This parameter must be an odd number between Min_Data = 1 and Max_Data = 65535 */ + + uint32_t CRCLength; /*!< Specifies the CRC Length used for the CRC calculation. + CRC Length is only used with Data8 and Data16, not other data size + This parameter can be a value of @ref SPI_CRC_length */ + + uint32_t NSSPMode; /*!< Specifies whether the NSSP signal is enabled or not . + This parameter can be a value of @ref SPI_NSSP_Mode + This mode is activated by the NSSP bit in the SPIx_CR2 register and + it takes effect only if the SPI interface is configured as Motorola SPI + master (FRF=0) with capture on the first edge (SPIx_CR1 CPHA = 0, + CPOL setting is ignored).. */ +} SPI_InitTypeDef; + +/** + * @brief HAL SPI State structure definition + */ +typedef enum +{ + HAL_SPI_STATE_RESET = 0x00U, /*!< Peripheral not Initialized */ + HAL_SPI_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ + HAL_SPI_STATE_BUSY = 0x02U, /*!< an internal process is ongoing */ + HAL_SPI_STATE_BUSY_TX = 0x03U, /*!< Data Transmission process is ongoing */ + HAL_SPI_STATE_BUSY_RX = 0x04U, /*!< Data Reception process is ongoing */ + HAL_SPI_STATE_BUSY_TX_RX = 0x05U, /*!< Data Transmission and Reception process is ongoing */ + HAL_SPI_STATE_ERROR = 0x06U, /*!< SPI error state */ + HAL_SPI_STATE_ABORT = 0x07U /*!< SPI abort is ongoing */ +} HAL_SPI_StateTypeDef; + +/** + * @brief SPI handle Structure definition + */ +typedef struct __SPI_HandleTypeDef +{ + SPI_TypeDef *Instance; /*!< SPI registers base address */ + + SPI_InitTypeDef Init; /*!< SPI communication parameters */ + + uint8_t *pTxBuffPtr; /*!< Pointer to SPI Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< SPI Tx Transfer size */ + + __IO uint16_t TxXferCount; /*!< SPI Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to SPI Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< SPI Rx Transfer size */ + + __IO uint16_t RxXferCount; /*!< SPI Rx Transfer Counter */ + + uint32_t CRCSize; /*!< SPI CRC size used for the transfer */ + + void (*RxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Rx ISR */ + + void (*TxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Tx ISR */ + + DMA_HandleTypeDef *hdmatx; /*!< SPI Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< SPI Rx DMA Handle parameters */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_SPI_StateTypeDef State; /*!< SPI communication state */ + + __IO uint32_t ErrorCode; /*!< SPI Error code */ + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + void (* TxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Tx Completed callback */ + void (* RxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Rx Completed callback */ + void (* TxRxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI TxRx Completed callback */ + void (* TxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Tx Half Completed callback */ + void (* RxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Rx Half Completed callback */ + void (* TxRxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI TxRx Half Completed callback */ + void (* ErrorCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Error callback */ + void (* AbortCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Abort callback */ + void (* MspInitCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Msp Init callback */ + void (* MspDeInitCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Msp DeInit callback */ + +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} SPI_HandleTypeDef; + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) +/** + * @brief HAL SPI Callback ID enumeration definition + */ +typedef enum +{ + HAL_SPI_TX_COMPLETE_CB_ID = 0x00U, /*!< SPI Tx Completed callback ID */ + HAL_SPI_RX_COMPLETE_CB_ID = 0x01U, /*!< SPI Rx Completed callback ID */ + HAL_SPI_TX_RX_COMPLETE_CB_ID = 0x02U, /*!< SPI TxRx Completed callback ID */ + HAL_SPI_TX_HALF_COMPLETE_CB_ID = 0x03U, /*!< SPI Tx Half Completed callback ID */ + HAL_SPI_RX_HALF_COMPLETE_CB_ID = 0x04U, /*!< SPI Rx Half Completed callback ID */ + HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID = 0x05U, /*!< SPI TxRx Half Completed callback ID */ + HAL_SPI_ERROR_CB_ID = 0x06U, /*!< SPI Error callback ID */ + HAL_SPI_ABORT_CB_ID = 0x07U, /*!< SPI Abort callback ID */ + HAL_SPI_MSPINIT_CB_ID = 0x08U, /*!< SPI Msp Init callback ID */ + HAL_SPI_MSPDEINIT_CB_ID = 0x09U /*!< SPI Msp DeInit callback ID */ + +} HAL_SPI_CallbackIDTypeDef; + +/** + * @brief HAL SPI Callback pointer definition + */ +typedef void (*pSPI_CallbackTypeDef)(SPI_HandleTypeDef *hspi); /*!< pointer to an SPI callback function */ + +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SPI_Exported_Constants SPI Exported Constants + * @{ + */ + +/** @defgroup SPI_Error_Code SPI Error Code + * @{ + */ +#define HAL_SPI_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_SPI_ERROR_MODF (0x00000001U) /*!< MODF error */ +#define HAL_SPI_ERROR_CRC (0x00000002U) /*!< CRC error */ +#define HAL_SPI_ERROR_OVR (0x00000004U) /*!< OVR error */ +#define HAL_SPI_ERROR_FRE (0x00000008U) /*!< FRE error */ +#define HAL_SPI_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#define HAL_SPI_ERROR_FLAG (0x00000020U) /*!< Error on RXNE/TXE/BSY/FTLVL/FRLVL Flag */ +#define HAL_SPI_ERROR_ABORT (0x00000040U) /*!< Error during SPI Abort procedure */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) +#define HAL_SPI_ERROR_INVALID_CALLBACK (0x00000080U) /*!< Invalid Callback error */ +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup SPI_Mode SPI Mode + * @{ + */ +#define SPI_MODE_SLAVE (0x00000000U) +#define SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI) +/** + * @} + */ + +/** @defgroup SPI_Direction SPI Direction Mode + * @{ + */ +#define SPI_DIRECTION_2LINES (0x00000000U) +#define SPI_DIRECTION_2LINES_RXONLY SPI_CR1_RXONLY +#define SPI_DIRECTION_1LINE SPI_CR1_BIDIMODE +/** + * @} + */ + +/** @defgroup SPI_Data_Size SPI Data Size + * @{ + */ +#define SPI_DATASIZE_4BIT (0x00000300U) +#define SPI_DATASIZE_5BIT (0x00000400U) +#define SPI_DATASIZE_6BIT (0x00000500U) +#define SPI_DATASIZE_7BIT (0x00000600U) +#define SPI_DATASIZE_8BIT (0x00000700U) +#define SPI_DATASIZE_9BIT (0x00000800U) +#define SPI_DATASIZE_10BIT (0x00000900U) +#define SPI_DATASIZE_11BIT (0x00000A00U) +#define SPI_DATASIZE_12BIT (0x00000B00U) +#define SPI_DATASIZE_13BIT (0x00000C00U) +#define SPI_DATASIZE_14BIT (0x00000D00U) +#define SPI_DATASIZE_15BIT (0x00000E00U) +#define SPI_DATASIZE_16BIT (0x00000F00U) +/** + * @} + */ + +/** @defgroup SPI_Clock_Polarity SPI Clock Polarity + * @{ + */ +#define SPI_POLARITY_LOW (0x00000000U) +#define SPI_POLARITY_HIGH SPI_CR1_CPOL +/** + * @} + */ + +/** @defgroup SPI_Clock_Phase SPI Clock Phase + * @{ + */ +#define SPI_PHASE_1EDGE (0x00000000U) +#define SPI_PHASE_2EDGE SPI_CR1_CPHA +/** + * @} + */ + +/** @defgroup SPI_Slave_Select_management SPI Slave Select Management + * @{ + */ +#define SPI_NSS_SOFT SPI_CR1_SSM +#define SPI_NSS_HARD_INPUT (0x00000000U) +#define SPI_NSS_HARD_OUTPUT (SPI_CR2_SSOE << 16U) +/** + * @} + */ + +/** @defgroup SPI_NSSP_Mode SPI NSS Pulse Mode + * @{ + */ +#define SPI_NSS_PULSE_ENABLE SPI_CR2_NSSP +#define SPI_NSS_PULSE_DISABLE (0x00000000U) +/** + * @} + */ + +/** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler + * @{ + */ +#define SPI_BAUDRATEPRESCALER_2 (0x00000000U) +#define SPI_BAUDRATEPRESCALER_4 (SPI_CR1_BR_0) +#define SPI_BAUDRATEPRESCALER_8 (SPI_CR1_BR_1) +#define SPI_BAUDRATEPRESCALER_16 (SPI_CR1_BR_1 | SPI_CR1_BR_0) +#define SPI_BAUDRATEPRESCALER_32 (SPI_CR1_BR_2) +#define SPI_BAUDRATEPRESCALER_64 (SPI_CR1_BR_2 | SPI_CR1_BR_0) +#define SPI_BAUDRATEPRESCALER_128 (SPI_CR1_BR_2 | SPI_CR1_BR_1) +#define SPI_BAUDRATEPRESCALER_256 (SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0) +/** + * @} + */ + +/** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB Transmission + * @{ + */ +#define SPI_FIRSTBIT_MSB (0x00000000U) +#define SPI_FIRSTBIT_LSB SPI_CR1_LSBFIRST +/** + * @} + */ + +/** @defgroup SPI_TI_mode SPI TI Mode + * @{ + */ +#define SPI_TIMODE_DISABLE (0x00000000U) +#define SPI_TIMODE_ENABLE SPI_CR2_FRF +/** + * @} + */ + +/** @defgroup SPI_CRC_Calculation SPI CRC Calculation + * @{ + */ +#define SPI_CRCCALCULATION_DISABLE (0x00000000U) +#define SPI_CRCCALCULATION_ENABLE SPI_CR1_CRCEN +/** + * @} + */ + +/** @defgroup SPI_CRC_length SPI CRC Length + * @{ + * This parameter can be one of the following values: + * SPI_CRC_LENGTH_DATASIZE: aligned with the data size + * SPI_CRC_LENGTH_8BIT : CRC 8bit + * SPI_CRC_LENGTH_16BIT : CRC 16bit + */ +#define SPI_CRC_LENGTH_DATASIZE (0x00000000U) +#define SPI_CRC_LENGTH_8BIT (0x00000001U) +#define SPI_CRC_LENGTH_16BIT (0x00000002U) +/** + * @} + */ + +/** @defgroup SPI_FIFO_reception_threshold SPI FIFO Reception Threshold + * @{ + * This parameter can be one of the following values: + * SPI_RXFIFO_THRESHOLD or SPI_RXFIFO_THRESHOLD_QF : + * RXNE event is generated if the FIFO + * level is greater or equal to 1/4(8-bits). + * SPI_RXFIFO_THRESHOLD_HF: RXNE event is generated if the FIFO + * level is greater or equal to 1/2(16 bits). */ +#define SPI_RXFIFO_THRESHOLD SPI_CR2_FRXTH +#define SPI_RXFIFO_THRESHOLD_QF SPI_CR2_FRXTH +#define SPI_RXFIFO_THRESHOLD_HF (0x00000000U) +/** + * @} + */ + +/** @defgroup SPI_Interrupt_definition SPI Interrupt Definition + * @{ + */ +#define SPI_IT_TXE SPI_CR2_TXEIE +#define SPI_IT_RXNE SPI_CR2_RXNEIE +#define SPI_IT_ERR SPI_CR2_ERRIE +/** + * @} + */ + +/** @defgroup SPI_Flags_definition SPI Flags Definition + * @{ + */ +#define SPI_FLAG_RXNE SPI_SR_RXNE /* SPI status flag: Rx buffer not empty flag */ +#define SPI_FLAG_TXE SPI_SR_TXE /* SPI status flag: Tx buffer empty flag */ +#define SPI_FLAG_BSY SPI_SR_BSY /* SPI status flag: Busy flag */ +#define SPI_FLAG_CRCERR SPI_SR_CRCERR /* SPI Error flag: CRC error flag */ +#define SPI_FLAG_MODF SPI_SR_MODF /* SPI Error flag: Mode fault flag */ +#define SPI_FLAG_OVR SPI_SR_OVR /* SPI Error flag: Overrun flag */ +#define SPI_FLAG_FRE SPI_SR_FRE /* SPI Error flag: TI mode frame format error flag */ +#define SPI_FLAG_FTLVL SPI_SR_FTLVL /* SPI fifo transmission level */ +#define SPI_FLAG_FRLVL SPI_SR_FRLVL /* SPI fifo reception level */ +#define SPI_FLAG_MASK (SPI_SR_RXNE | SPI_SR_TXE | SPI_SR_BSY | SPI_SR_CRCERR\ + | SPI_SR_MODF | SPI_SR_OVR | SPI_SR_FRE | SPI_SR_FTLVL | SPI_SR_FRLVL) +/** + * @} + */ + +/** @defgroup SPI_transmission_fifo_status_level SPI Transmission FIFO Status Level + * @{ + */ +#define SPI_FTLVL_EMPTY (0x00000000U) +#define SPI_FTLVL_QUARTER_FULL (0x00000800U) +#define SPI_FTLVL_HALF_FULL (0x00001000U) +#define SPI_FTLVL_FULL (0x00001800U) + +/** + * @} + */ + +/** @defgroup SPI_reception_fifo_status_level SPI Reception FIFO Status Level + * @{ + */ +#define SPI_FRLVL_EMPTY (0x00000000U) +#define SPI_FRLVL_QUARTER_FULL (0x00000200U) +#define SPI_FRLVL_HALF_FULL (0x00000400U) +#define SPI_FRLVL_FULL (0x00000600U) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup SPI_Exported_Macros SPI Exported Macros + * @{ + */ + +/** @brief Reset SPI handle state. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) +#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_SPI_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET) +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + +/** @brief Enable the specified SPI interrupts. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @param __INTERRUPT__ specifies the interrupt source to enable. + * This parameter can be one of the following values: + * @arg SPI_IT_TXE: Tx buffer empty interrupt enable + * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable + * @arg SPI_IT_ERR: Error interrupt enable + * @retval None + */ +#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__)) + +/** @brief Disable the specified SPI interrupts. + * @param __HANDLE__ specifies the SPI handle. + * This parameter can be SPIx where x: 1, 2, or 3 to select the SPI peripheral. + * @param __INTERRUPT__ specifies the interrupt source to disable. + * This parameter can be one of the following values: + * @arg SPI_IT_TXE: Tx buffer empty interrupt enable + * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable + * @arg SPI_IT_ERR: Error interrupt enable + * @retval None + */ +#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__)) + +/** @brief Check whether the specified SPI interrupt source is enabled or not. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @param __INTERRUPT__ specifies the SPI interrupt source to check. + * This parameter can be one of the following values: + * @arg SPI_IT_TXE: Tx buffer empty interrupt enable + * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable + * @arg SPI_IT_ERR: Error interrupt enable + * @retval The new state of __IT__ (TRUE or FALSE). + */ +#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2\ + & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Check whether the specified SPI flag is set or not. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg SPI_FLAG_RXNE: Receive buffer not empty flag + * @arg SPI_FLAG_TXE: Transmit buffer empty flag + * @arg SPI_FLAG_CRCERR: CRC error flag + * @arg SPI_FLAG_MODF: Mode fault flag + * @arg SPI_FLAG_OVR: Overrun flag + * @arg SPI_FLAG_BSY: Busy flag + * @arg SPI_FLAG_FRE: Frame format error flag + * @arg SPI_FLAG_FTLVL: SPI fifo transmission level + * @arg SPI_FLAG_FRLVL: SPI fifo reception level + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the SPI CRCERR pending flag. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = (uint16_t)(~SPI_FLAG_CRCERR)) + +/** @brief Clear the SPI MODF pending flag. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) \ + do{ \ + __IO uint32_t tmpreg_modf = 0x00U; \ + tmpreg_modf = (__HANDLE__)->Instance->SR; \ + CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE); \ + UNUSED(tmpreg_modf); \ + } while(0U) + +/** @brief Clear the SPI OVR pending flag. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) \ + do{ \ + __IO uint32_t tmpreg_ovr = 0x00U; \ + tmpreg_ovr = (__HANDLE__)->Instance->DR; \ + tmpreg_ovr = (__HANDLE__)->Instance->SR; \ + UNUSED(tmpreg_ovr); \ + } while(0U) + +/** @brief Clear the SPI FRE pending flag. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) \ + do{ \ + __IO uint32_t tmpreg_fre = 0x00U; \ + tmpreg_fre = (__HANDLE__)->Instance->SR; \ + UNUSED(tmpreg_fre); \ + }while(0U) + +/** @brief Enable the SPI peripheral. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE) + +/** @brief Disable the SPI peripheral. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE) + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SPI_Private_Macros SPI Private Macros + * @{ + */ + +/** @brief Set the SPI transmit-only mode. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define SPI_1LINE_TX(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE) + +/** @brief Set the SPI receive-only mode. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define SPI_1LINE_RX(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE) + +/** @brief Reset the CRC calculation of the SPI. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define SPI_RESET_CRC(__HANDLE__) do{CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);\ + SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);}while(0U) + +/** @brief Check whether the specified SPI flag is set or not. + * @param __SR__ copy of SPI SR regsiter. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg SPI_FLAG_RXNE: Receive buffer not empty flag + * @arg SPI_FLAG_TXE: Transmit buffer empty flag + * @arg SPI_FLAG_CRCERR: CRC error flag + * @arg SPI_FLAG_MODF: Mode fault flag + * @arg SPI_FLAG_OVR: Overrun flag + * @arg SPI_FLAG_BSY: Busy flag + * @arg SPI_FLAG_FRE: Frame format error flag + * @arg SPI_FLAG_FTLVL: SPI fifo transmission level + * @arg SPI_FLAG_FRLVL: SPI fifo reception level + * @retval SET or RESET. + */ +#define SPI_CHECK_FLAG(__SR__, __FLAG__) ((((__SR__) & ((__FLAG__) & SPI_FLAG_MASK)) == ((__FLAG__) & SPI_FLAG_MASK)) ? SET : RESET) + +/** @brief Check whether the specified SPI Interrupt is set or not. + * @param __CR2__ copy of SPI CR2 regsiter. + * @param __INTERRUPT__ specifies the SPI interrupt source to check. + * This parameter can be one of the following values: + * @arg SPI_IT_TXE: Tx buffer empty interrupt enable + * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable + * @arg SPI_IT_ERR: Error interrupt enable + * @retval SET or RESET. + */ +#define SPI_CHECK_IT_SOURCE(__CR2__, __INTERRUPT__) ((((__CR2__) & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Checks if SPI Mode parameter is in allowed range. + * @param __MODE__ specifies the SPI Mode. + * This parameter can be a value of @ref SPI_Mode + * @retval None + */ +#define IS_SPI_MODE(__MODE__) (((__MODE__) == SPI_MODE_SLAVE) || \ + ((__MODE__) == SPI_MODE_MASTER)) + +/** @brief Checks if SPI Direction Mode parameter is in allowed range. + * @param __MODE__ specifies the SPI Direction Mode. + * This parameter can be a value of @ref SPI_Direction + * @retval None + */ +#define IS_SPI_DIRECTION(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES) || \ + ((__MODE__) == SPI_DIRECTION_2LINES_RXONLY) || \ + ((__MODE__) == SPI_DIRECTION_1LINE)) + +/** @brief Checks if SPI Direction Mode parameter is 2 lines. + * @param __MODE__ specifies the SPI Direction Mode. + * @retval None + */ +#define IS_SPI_DIRECTION_2LINES(__MODE__) ((__MODE__) == SPI_DIRECTION_2LINES) + +/** @brief Checks if SPI Direction Mode parameter is 1 or 2 lines. + * @param __MODE__ specifies the SPI Direction Mode. + * @retval None + */ +#define IS_SPI_DIRECTION_2LINES_OR_1LINE(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES) || \ + ((__MODE__) == SPI_DIRECTION_1LINE)) + +/** @brief Checks if SPI Data Size parameter is in allowed range. + * @param __DATASIZE__ specifies the SPI Data Size. + * This parameter can be a value of @ref SPI_Data_Size + * @retval None + */ +#define IS_SPI_DATASIZE(__DATASIZE__) (((__DATASIZE__) == SPI_DATASIZE_16BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_15BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_14BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_13BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_12BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_11BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_10BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_9BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_8BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_7BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_6BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_5BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_4BIT)) + +/** @brief Checks if SPI Serial clock steady state parameter is in allowed range. + * @param __CPOL__ specifies the SPI serial clock steady state. + * This parameter can be a value of @ref SPI_Clock_Polarity + * @retval None + */ +#define IS_SPI_CPOL(__CPOL__) (((__CPOL__) == SPI_POLARITY_LOW) || \ + ((__CPOL__) == SPI_POLARITY_HIGH)) + +/** @brief Checks if SPI Clock Phase parameter is in allowed range. + * @param __CPHA__ specifies the SPI Clock Phase. + * This parameter can be a value of @ref SPI_Clock_Phase + * @retval None + */ +#define IS_SPI_CPHA(__CPHA__) (((__CPHA__) == SPI_PHASE_1EDGE) || \ + ((__CPHA__) == SPI_PHASE_2EDGE)) + +/** @brief Checks if SPI Slave Select parameter is in allowed range. + * @param __NSS__ specifies the SPI Slave Select management parameter. + * This parameter can be a value of @ref SPI_Slave_Select_management + * @retval None + */ +#define IS_SPI_NSS(__NSS__) (((__NSS__) == SPI_NSS_SOFT) || \ + ((__NSS__) == SPI_NSS_HARD_INPUT) || \ + ((__NSS__) == SPI_NSS_HARD_OUTPUT)) + +/** @brief Checks if SPI NSS Pulse parameter is in allowed range. + * @param __NSSP__ specifies the SPI NSS Pulse Mode parameter. + * This parameter can be a value of @ref SPI_NSSP_Mode + * @retval None + */ +#define IS_SPI_NSSP(__NSSP__) (((__NSSP__) == SPI_NSS_PULSE_ENABLE) || \ + ((__NSSP__) == SPI_NSS_PULSE_DISABLE)) + +/** @brief Checks if SPI Baudrate prescaler parameter is in allowed range. + * @param __PRESCALER__ specifies the SPI Baudrate prescaler. + * This parameter can be a value of @ref SPI_BaudRate_Prescaler + * @retval None + */ +#define IS_SPI_BAUDRATE_PRESCALER(__PRESCALER__) (((__PRESCALER__) == SPI_BAUDRATEPRESCALER_2) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_4) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_8) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_16) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_32) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_64) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_128) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_256)) + +/** @brief Checks if SPI MSB LSB transmission parameter is in allowed range. + * @param __BIT__ specifies the SPI MSB LSB transmission (whether data transfer starts from MSB or LSB bit). + * This parameter can be a value of @ref SPI_MSB_LSB_transmission + * @retval None + */ +#define IS_SPI_FIRST_BIT(__BIT__) (((__BIT__) == SPI_FIRSTBIT_MSB) || \ + ((__BIT__) == SPI_FIRSTBIT_LSB)) + +/** @brief Checks if SPI TI mode parameter is in allowed range. + * @param __MODE__ specifies the SPI TI mode. + * This parameter can be a value of @ref SPI_TI_mode + * @retval None + */ +#define IS_SPI_TIMODE(__MODE__) (((__MODE__) == SPI_TIMODE_DISABLE) || \ + ((__MODE__) == SPI_TIMODE_ENABLE)) + +/** @brief Checks if SPI CRC calculation enabled state is in allowed range. + * @param __CALCULATION__ specifies the SPI CRC calculation enable state. + * This parameter can be a value of @ref SPI_CRC_Calculation + * @retval None + */ +#define IS_SPI_CRC_CALCULATION(__CALCULATION__) (((__CALCULATION__) == SPI_CRCCALCULATION_DISABLE) || \ + ((__CALCULATION__) == SPI_CRCCALCULATION_ENABLE)) + +/** @brief Checks if SPI CRC length is in allowed range. + * @param __LENGTH__ specifies the SPI CRC length. + * This parameter can be a value of @ref SPI_CRC_length + * @retval None + */ +#define IS_SPI_CRC_LENGTH(__LENGTH__) (((__LENGTH__) == SPI_CRC_LENGTH_DATASIZE) ||\ + ((__LENGTH__) == SPI_CRC_LENGTH_8BIT) || \ + ((__LENGTH__) == SPI_CRC_LENGTH_16BIT)) + +/** @brief Checks if SPI polynomial value to be used for the CRC calculation, is in allowed range. + * @param __POLYNOMIAL__ specifies the SPI polynomial value to be used for the CRC calculation. + * This parameter must be a number between Min_Data = 0 and Max_Data = 65535 + * @retval None + */ +#define IS_SPI_CRC_POLYNOMIAL(__POLYNOMIAL__) (((__POLYNOMIAL__) >= 0x1U) && ((__POLYNOMIAL__) <= 0xFFFFU) && (((__POLYNOMIAL__)&0x1U) != 0U)) + +/** @brief Checks if DMA handle is valid. + * @param __HANDLE__ specifies a DMA Handle. + * @retval None + */ +#define IS_SPI_DMA_HANDLE(__HANDLE__) ((__HANDLE__) != NULL) + +/** @brief Checks if a data address is 16bit aligned. + * @param __DATA__ specifies a data address. + * @retval None + */ +#define IS_SPI_16BIT_ALIGNED_ADDRESS(__DATA__) (((uint32_t)(__DATA__) % 2U) == 0U) + +/** + * @} + */ + +/* Include SPI HAL Extended module */ +#include "stm32f0xx_hal_spi_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SPI_Exported_Functions + * @{ + */ + +/** @addtogroup SPI_Exported_Functions_Group1 + * @{ + */ +/* Initialization/de-initialization functions ********************************/ +HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi); +void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi); +void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) +HAL_StatusTypeDef HAL_SPI_RegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID, pSPI_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SPI_UnRegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup SPI_Exported_Functions_Group2 + * @{ + */ +/* I/O operation functions ***************************************************/ +HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size); +HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size); +HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi); +/* Transfer Abort functions */ +HAL_StatusTypeDef HAL_SPI_Abort(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_Abort_IT(SPI_HandleTypeDef *hspi); + +void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_AbortCpltCallback(SPI_HandleTypeDef *hspi); +/** + * @} + */ + +/** @addtogroup SPI_Exported_Functions_Group3 + * @{ + */ +/* Peripheral State and Error functions ***************************************/ +HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi); +uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32F0xx_HAL_SPI_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit