From 94f94260ace13688285fc8c62687079b26c18854 Mon Sep 17 00:00:00 2001 From: jaseg Date: Sun, 20 Dec 2020 15:18:02 +0100 Subject: Submodule-cache WIP --- .../STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h | 1686 -------------------- 1 file changed, 1686 deletions(-) delete mode 100644 fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h (limited to 'fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h') diff --git a/fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h b/fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h deleted file mode 100644 index 4239c51..0000000 --- a/fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h +++ /dev/null @@ -1,1686 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f0xx_hal_rcc.h - * @author MCD Application Team - * @brief Header file of RCC HAL module. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F0xx_HAL_RCC_H -#define __STM32F0xx_HAL_RCC_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f0xx_hal_def.h" - -/** @addtogroup STM32F0xx_HAL_Driver - * @{ - */ - -/** @addtogroup RCC - * @{ - */ - -/** @addtogroup RCC_Private_Constants - * @{ - */ - -/** @defgroup RCC_Timeout RCC Timeout - * @{ - */ - -/* Disable Backup domain write protection state change timeout */ -#define RCC_DBP_TIMEOUT_VALUE (100U) /* 100 ms */ -/* LSE state change timeout */ -#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT -#define CLOCKSWITCH_TIMEOUT_VALUE (5000U) /* 5 s */ -#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT -#define HSI_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1U) */ -#define LSI_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1U) */ -#define PLL_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1U) */ -#define HSI14_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1U) */ -#if defined(RCC_HSI48_SUPPORT) -#define HSI48_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1U) */ -#endif /* RCC_HSI48_SUPPORT */ -/** - * @} - */ - -/** @defgroup RCC_Register_Offset Register offsets - * @{ - */ -#define RCC_OFFSET (RCC_BASE - PERIPH_BASE) -#define RCC_CR_OFFSET 0x00 -#define RCC_CFGR_OFFSET 0x04 -#define RCC_CIR_OFFSET 0x08 -#define RCC_BDCR_OFFSET 0x20 -#define RCC_CSR_OFFSET 0x24 - -/** - * @} - */ - - -/* CR register byte 2 (Bits[23:16]) base address */ -#define RCC_CR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + RCC_CR_OFFSET + 0x02U)) - -/* CIR register byte 1 (Bits[15:8]) base address */ -#define RCC_CIR_BYTE1_ADDRESS ((uint32_t)(RCC_BASE + RCC_CIR_OFFSET + 0x01U)) - -/* CIR register byte 2 (Bits[23:16]) base address */ -#define RCC_CIR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + RCC_CIR_OFFSET + 0x02U)) - -/* Defines used for Flags */ -#define CR_REG_INDEX ((uint8_t)1U) -#define CR2_REG_INDEX ((uint8_t)2U) -#define BDCR_REG_INDEX ((uint8_t)3U) -#define CSR_REG_INDEX ((uint8_t)4U) - -/* Bits position in in the CFGR register */ -#define RCC_CFGR_PLLMUL_BITNUMBER 18U -#define RCC_CFGR_HPRE_BITNUMBER 4U -#define RCC_CFGR_PPRE_BITNUMBER 8U -/* Flags in the CFGR2 register */ -#define RCC_CFGR2_PREDIV_BITNUMBER 0 -/* Flags in the CR register */ -#define RCC_CR_HSIRDY_BitNumber 1 -#define RCC_CR_HSERDY_BitNumber 17 -#define RCC_CR_PLLRDY_BitNumber 25 -/* Flags in the CR2 register */ -#define RCC_CR2_HSI14RDY_BitNumber 1 -#define RCC_CR2_HSI48RDY_BitNumber 16 -/* Flags in the BDCR register */ -#define RCC_BDCR_LSERDY_BitNumber 1 -/* Flags in the CSR register */ -#define RCC_CSR_LSIRDY_BitNumber 1 -#define RCC_CSR_V18PWRRSTF_BitNumber 23 -#define RCC_CSR_RMVF_BitNumber 24 -#define RCC_CSR_OBLRSTF_BitNumber 25 -#define RCC_CSR_PINRSTF_BitNumber 26 -#define RCC_CSR_PORRSTF_BitNumber 27 -#define RCC_CSR_SFTRSTF_BitNumber 28 -#define RCC_CSR_IWDGRSTF_BitNumber 29 -#define RCC_CSR_WWDGRSTF_BitNumber 30 -#define RCC_CSR_LPWRRSTF_BitNumber 31 -/* Flags in the HSITRIM register */ -#define RCC_CR_HSITRIM_BitNumber 3 -#define RCC_HSI14TRIM_BIT_NUMBER 3 -#define RCC_FLAG_MASK ((uint8_t)0x1FU) - -/** - * @} - */ - -/** @addtogroup RCC_Private_Macros - * @{ - */ -#define IS_RCC_HSE(__HSE__) (((__HSE__) == RCC_HSE_OFF) || ((__HSE__) == RCC_HSE_ON) || \ - ((__HSE__) == RCC_HSE_BYPASS)) -#define IS_RCC_LSE(__LSE__) (((__LSE__) == RCC_LSE_OFF) || ((__LSE__) == RCC_LSE_ON) || \ - ((__LSE__) == RCC_LSE_BYPASS)) -#define IS_RCC_HSI(__HSI__) (((__HSI__) == RCC_HSI_OFF) || ((__HSI__) == RCC_HSI_ON)) -#define IS_RCC_HSI14(__HSI14__) (((__HSI14__) == RCC_HSI14_OFF) || ((__HSI14__) == RCC_HSI14_ON) || ((__HSI14__) == RCC_HSI14_ADC_CONTROL)) -#define IS_RCC_CALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= 0x1FU) -#define IS_RCC_LSI(__LSI__) (((__LSI__) == RCC_LSI_OFF) || ((__LSI__) == RCC_LSI_ON)) -#define IS_RCC_PLL(__PLL__) (((__PLL__) == RCC_PLL_NONE) || ((__PLL__) == RCC_PLL_OFF) || \ - ((__PLL__) == RCC_PLL_ON)) -#define IS_RCC_PREDIV(__PREDIV__) (((__PREDIV__) == RCC_PREDIV_DIV1) || ((__PREDIV__) == RCC_PREDIV_DIV2) || \ - ((__PREDIV__) == RCC_PREDIV_DIV3) || ((__PREDIV__) == RCC_PREDIV_DIV4) || \ - ((__PREDIV__) == RCC_PREDIV_DIV5) || ((__PREDIV__) == RCC_PREDIV_DIV6) || \ - ((__PREDIV__) == RCC_PREDIV_DIV7) || ((__PREDIV__) == RCC_PREDIV_DIV8) || \ - ((__PREDIV__) == RCC_PREDIV_DIV9) || ((__PREDIV__) == RCC_PREDIV_DIV10) || \ - ((__PREDIV__) == RCC_PREDIV_DIV11) || ((__PREDIV__) == RCC_PREDIV_DIV12) || \ - ((__PREDIV__) == RCC_PREDIV_DIV13) || ((__PREDIV__) == RCC_PREDIV_DIV14) || \ - ((__PREDIV__) == RCC_PREDIV_DIV15) || ((__PREDIV__) == RCC_PREDIV_DIV16)) - -#define IS_RCC_PLL_MUL(__MUL__) (((__MUL__) == RCC_PLL_MUL2) || ((__MUL__) == RCC_PLL_MUL3) || \ - ((__MUL__) == RCC_PLL_MUL4) || ((__MUL__) == RCC_PLL_MUL5) || \ - ((__MUL__) == RCC_PLL_MUL6) || ((__MUL__) == RCC_PLL_MUL7) || \ - ((__MUL__) == RCC_PLL_MUL8) || ((__MUL__) == RCC_PLL_MUL9) || \ - ((__MUL__) == RCC_PLL_MUL10) || ((__MUL__) == RCC_PLL_MUL11) || \ - ((__MUL__) == RCC_PLL_MUL12) || ((__MUL__) == RCC_PLL_MUL13) || \ - ((__MUL__) == RCC_PLL_MUL14) || ((__MUL__) == RCC_PLL_MUL15) || \ - ((__MUL__) == RCC_PLL_MUL16)) -#define IS_RCC_CLOCKTYPE(__CLK__) ((((__CLK__) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) || \ - (((__CLK__) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) || \ - (((__CLK__) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1)) -#define IS_RCC_HCLK(__HCLK__) (((__HCLK__) == RCC_SYSCLK_DIV1) || ((__HCLK__) == RCC_SYSCLK_DIV2) || \ - ((__HCLK__) == RCC_SYSCLK_DIV4) || ((__HCLK__) == RCC_SYSCLK_DIV8) || \ - ((__HCLK__) == RCC_SYSCLK_DIV16) || ((__HCLK__) == RCC_SYSCLK_DIV64) || \ - ((__HCLK__) == RCC_SYSCLK_DIV128) || ((__HCLK__) == RCC_SYSCLK_DIV256) || \ - ((__HCLK__) == RCC_SYSCLK_DIV512)) -#define IS_RCC_PCLK(__PCLK__) (((__PCLK__) == RCC_HCLK_DIV1) || ((__PCLK__) == RCC_HCLK_DIV2) || \ - ((__PCLK__) == RCC_HCLK_DIV4) || ((__PCLK__) == RCC_HCLK_DIV8) || \ - ((__PCLK__) == RCC_HCLK_DIV16)) -#define IS_RCC_MCO(__MCO__) ((__MCO__) == RCC_MCO) -#define IS_RCC_RTCCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_RTCCLKSOURCE_NO_CLK) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_LSE) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_LSI) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV32)) -#define IS_RCC_USART1CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_USART1CLKSOURCE_PCLK1) || \ - ((__SOURCE__) == RCC_USART1CLKSOURCE_SYSCLK) || \ - ((__SOURCE__) == RCC_USART1CLKSOURCE_LSE) || \ - ((__SOURCE__) == RCC_USART1CLKSOURCE_HSI)) -#define IS_RCC_I2C1CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_I2C1CLKSOURCE_HSI) || \ - ((__SOURCE__) == RCC_I2C1CLKSOURCE_SYSCLK)) - -/** - * @} - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup RCC_Exported_Types RCC Exported Types - * @{ - */ - -/** - * @brief RCC PLL configuration structure definition - */ -typedef struct -{ - uint32_t PLLState; /*!< PLLState: The new state of the PLL. - This parameter can be a value of @ref RCC_PLL_Config */ - - uint32_t PLLSource; /*!< PLLSource: PLL entry clock source. - This parameter must be a value of @ref RCC_PLL_Clock_Source */ - - uint32_t PLLMUL; /*!< PLLMUL: Multiplication factor for PLL VCO input clock - This parameter must be a value of @ref RCC_PLL_Multiplication_Factor*/ - - uint32_t PREDIV; /*!< PREDIV: Predivision factor for PLL VCO input clock - This parameter must be a value of @ref RCC_PLL_Prediv_Factor */ - -} RCC_PLLInitTypeDef; - -/** - * @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition - */ -typedef struct -{ - uint32_t OscillatorType; /*!< The oscillators to be configured. - This parameter can be a value of @ref RCC_Oscillator_Type */ - - uint32_t HSEState; /*!< The new state of the HSE. - This parameter can be a value of @ref RCC_HSE_Config */ - - uint32_t LSEState; /*!< The new state of the LSE. - This parameter can be a value of @ref RCC_LSE_Config */ - - uint32_t HSIState; /*!< The new state of the HSI. - This parameter can be a value of @ref RCC_HSI_Config */ - - uint32_t HSICalibrationValue; /*!< The HSI calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT). - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1FU */ - - uint32_t HSI14State; /*!< The new state of the HSI14. - This parameter can be a value of @ref RCC_HSI14_Config */ - - uint32_t HSI14CalibrationValue; /*!< The HSI14 calibration trimming value (default is RCC_HSI14CALIBRATION_DEFAULT). - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1FU */ - - uint32_t LSIState; /*!< The new state of the LSI. - This parameter can be a value of @ref RCC_LSI_Config */ - -#if defined(RCC_HSI48_SUPPORT) - uint32_t HSI48State; /*!< The new state of the HSI48. - This parameter can be a value of @ref RCC_HSI48_Config */ - -#endif /* RCC_HSI48_SUPPORT */ - RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */ - -} RCC_OscInitTypeDef; - -/** - * @brief RCC System, AHB and APB busses clock configuration structure definition - */ -typedef struct -{ - uint32_t ClockType; /*!< The clock to be configured. - This parameter can be a value of @ref RCC_System_Clock_Type */ - - uint32_t SYSCLKSource; /*!< The clock source (SYSCLKS) used as system clock. - This parameter can be a value of @ref RCC_System_Clock_Source */ - - uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK). - This parameter can be a value of @ref RCC_AHB_Clock_Source */ - - uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK). - This parameter can be a value of @ref RCC_APB1_Clock_Source */ - -} RCC_ClkInitTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup RCC_Exported_Constants RCC Exported Constants - * @{ - */ - -/** @defgroup RCC_PLL_Clock_Source PLL Clock Source - * @{ - */ - -#define RCC_PLLSOURCE_HSE RCC_CFGR_PLLSRC_HSE_PREDIV /*!< HSE clock selected as PLL entry clock source */ - -/** - * @} - */ - -/** @defgroup RCC_Oscillator_Type Oscillator Type - * @{ - */ -#define RCC_OSCILLATORTYPE_NONE (0x00000000U) -#define RCC_OSCILLATORTYPE_HSE (0x00000001U) -#define RCC_OSCILLATORTYPE_HSI (0x00000002U) -#define RCC_OSCILLATORTYPE_LSE (0x00000004U) -#define RCC_OSCILLATORTYPE_LSI (0x00000008U) -#define RCC_OSCILLATORTYPE_HSI14 (0x00000010U) -#if defined(RCC_HSI48_SUPPORT) -#define RCC_OSCILLATORTYPE_HSI48 (0x00000020U) -#endif /* RCC_HSI48_SUPPORT */ -/** - * @} - */ - -/** @defgroup RCC_HSE_Config HSE Config - * @{ - */ -#define RCC_HSE_OFF (0x00000000U) /*!< HSE clock deactivation */ -#define RCC_HSE_ON (0x00000001U) /*!< HSE clock activation */ -#define RCC_HSE_BYPASS (0x00000005U) /*!< External clock source for HSE clock */ -/** - * @} - */ - -/** @defgroup RCC_LSE_Config LSE Config - * @{ - */ -#define RCC_LSE_OFF (0x00000000U) /*!< LSE clock deactivation */ -#define RCC_LSE_ON (0x00000001U) /*!< LSE clock activation */ -#define RCC_LSE_BYPASS (0x00000005U) /*!< External clock source for LSE clock */ - -/** - * @} - */ - -/** @defgroup RCC_HSI_Config HSI Config - * @{ - */ -#define RCC_HSI_OFF (0x00000000U) /*!< HSI clock deactivation */ -#define RCC_HSI_ON RCC_CR_HSION /*!< HSI clock activation */ - -#define RCC_HSICALIBRATION_DEFAULT (0x10U) /* Default HSI calibration trimming value */ - -/** - * @} - */ - -/** @defgroup RCC_HSI14_Config RCC HSI14 Config - * @{ - */ -#define RCC_HSI14_OFF (0x00000000U) -#define RCC_HSI14_ON RCC_CR2_HSI14ON -#define RCC_HSI14_ADC_CONTROL (~RCC_CR2_HSI14DIS) - -#define RCC_HSI14CALIBRATION_DEFAULT (0x10U) /* Default HSI14 calibration trimming value */ -/** - * @} - */ - -/** @defgroup RCC_LSI_Config LSI Config - * @{ - */ -#define RCC_LSI_OFF (0x00000000U) /*!< LSI clock deactivation */ -#define RCC_LSI_ON RCC_CSR_LSION /*!< LSI clock activation */ - -/** - * @} - */ - -#if defined(RCC_HSI48_SUPPORT) -/** @defgroup RCC_HSI48_Config HSI48 Config - * @{ - */ -#define RCC_HSI48_OFF ((uint8_t)0x00U) -#define RCC_HSI48_ON ((uint8_t)0x01U) - -/** - * @} - */ -#endif /* RCC_HSI48_SUPPORT */ - -/** @defgroup RCC_PLL_Config PLL Config - * @{ - */ -#define RCC_PLL_NONE (0x00000000U) /*!< PLL is not configured */ -#define RCC_PLL_OFF (0x00000001U) /*!< PLL deactivation */ -#define RCC_PLL_ON (0x00000002U) /*!< PLL activation */ - -/** - * @} - */ - -/** @defgroup RCC_System_Clock_Type System Clock Type - * @{ - */ -#define RCC_CLOCKTYPE_SYSCLK (0x00000001U) /*!< SYSCLK to configure */ -#define RCC_CLOCKTYPE_HCLK (0x00000002U) /*!< HCLK to configure */ -#define RCC_CLOCKTYPE_PCLK1 (0x00000004U) /*!< PCLK1 to configure */ - -/** - * @} - */ - -/** @defgroup RCC_System_Clock_Source System Clock Source - * @{ - */ -#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI /*!< HSI selected as system clock */ -#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE /*!< HSE selected as system clock */ -#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL /*!< PLL selected as system clock */ - -/** - * @} - */ - -/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status - * @{ - */ -#define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */ -#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */ -#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_PLL /*!< PLL used as system clock */ - -/** - * @} - */ - -/** @defgroup RCC_AHB_Clock_Source AHB Clock Source - * @{ - */ -#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1 /*!< SYSCLK not divided */ -#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2 /*!< SYSCLK divided by 2 */ -#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4 /*!< SYSCLK divided by 4 */ -#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8 /*!< SYSCLK divided by 8 */ -#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16 /*!< SYSCLK divided by 16 */ -#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64 /*!< SYSCLK divided by 64 */ -#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128 /*!< SYSCLK divided by 128 */ -#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256 /*!< SYSCLK divided by 256 */ -#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512 /*!< SYSCLK divided by 512 */ - -/** - * @} - */ - -/** @defgroup RCC_APB1_Clock_Source RCC APB1 Clock Source - * @{ - */ -#define RCC_HCLK_DIV1 RCC_CFGR_PPRE_DIV1 /*!< HCLK not divided */ -#define RCC_HCLK_DIV2 RCC_CFGR_PPRE_DIV2 /*!< HCLK divided by 2 */ -#define RCC_HCLK_DIV4 RCC_CFGR_PPRE_DIV4 /*!< HCLK divided by 4 */ -#define RCC_HCLK_DIV8 RCC_CFGR_PPRE_DIV8 /*!< HCLK divided by 8 */ -#define RCC_HCLK_DIV16 RCC_CFGR_PPRE_DIV16 /*!< HCLK divided by 16 */ - -/** - * @} - */ - -/** @defgroup RCC_RTC_Clock_Source RTC Clock Source - * @{ - */ -#define RCC_RTCCLKSOURCE_NO_CLK (0x00000000U) /*!< No clock */ -#define RCC_RTCCLKSOURCE_LSE RCC_BDCR_RTCSEL_LSE /*!< LSE oscillator clock used as RTC clock */ -#define RCC_RTCCLKSOURCE_LSI RCC_BDCR_RTCSEL_LSI /*!< LSI oscillator clock used as RTC clock */ -#define RCC_RTCCLKSOURCE_HSE_DIV32 RCC_BDCR_RTCSEL_HSE /*!< HSE oscillator clock divided by 32 used as RTC clock */ -/** - * @} - */ - -/** @defgroup RCC_PLL_Multiplication_Factor RCC PLL Multiplication Factor - * @{ - */ -#define RCC_PLL_MUL2 RCC_CFGR_PLLMUL2 -#define RCC_PLL_MUL3 RCC_CFGR_PLLMUL3 -#define RCC_PLL_MUL4 RCC_CFGR_PLLMUL4 -#define RCC_PLL_MUL5 RCC_CFGR_PLLMUL5 -#define RCC_PLL_MUL6 RCC_CFGR_PLLMUL6 -#define RCC_PLL_MUL7 RCC_CFGR_PLLMUL7 -#define RCC_PLL_MUL8 RCC_CFGR_PLLMUL8 -#define RCC_PLL_MUL9 RCC_CFGR_PLLMUL9 -#define RCC_PLL_MUL10 RCC_CFGR_PLLMUL10 -#define RCC_PLL_MUL11 RCC_CFGR_PLLMUL11 -#define RCC_PLL_MUL12 RCC_CFGR_PLLMUL12 -#define RCC_PLL_MUL13 RCC_CFGR_PLLMUL13 -#define RCC_PLL_MUL14 RCC_CFGR_PLLMUL14 -#define RCC_PLL_MUL15 RCC_CFGR_PLLMUL15 -#define RCC_PLL_MUL16 RCC_CFGR_PLLMUL16 - -/** - * @} - */ - -/** @defgroup RCC_PLL_Prediv_Factor RCC PLL Prediv Factor - * @{ - */ - -#define RCC_PREDIV_DIV1 RCC_CFGR2_PREDIV_DIV1 -#define RCC_PREDIV_DIV2 RCC_CFGR2_PREDIV_DIV2 -#define RCC_PREDIV_DIV3 RCC_CFGR2_PREDIV_DIV3 -#define RCC_PREDIV_DIV4 RCC_CFGR2_PREDIV_DIV4 -#define RCC_PREDIV_DIV5 RCC_CFGR2_PREDIV_DIV5 -#define RCC_PREDIV_DIV6 RCC_CFGR2_PREDIV_DIV6 -#define RCC_PREDIV_DIV7 RCC_CFGR2_PREDIV_DIV7 -#define RCC_PREDIV_DIV8 RCC_CFGR2_PREDIV_DIV8 -#define RCC_PREDIV_DIV9 RCC_CFGR2_PREDIV_DIV9 -#define RCC_PREDIV_DIV10 RCC_CFGR2_PREDIV_DIV10 -#define RCC_PREDIV_DIV11 RCC_CFGR2_PREDIV_DIV11 -#define RCC_PREDIV_DIV12 RCC_CFGR2_PREDIV_DIV12 -#define RCC_PREDIV_DIV13 RCC_CFGR2_PREDIV_DIV13 -#define RCC_PREDIV_DIV14 RCC_CFGR2_PREDIV_DIV14 -#define RCC_PREDIV_DIV15 RCC_CFGR2_PREDIV_DIV15 -#define RCC_PREDIV_DIV16 RCC_CFGR2_PREDIV_DIV16 - -/** - * @} - */ - - -/** @defgroup RCC_USART1_Clock_Source RCC USART1 Clock Source - * @{ - */ -#define RCC_USART1CLKSOURCE_PCLK1 RCC_CFGR3_USART1SW_PCLK -#define RCC_USART1CLKSOURCE_SYSCLK RCC_CFGR3_USART1SW_SYSCLK -#define RCC_USART1CLKSOURCE_LSE RCC_CFGR3_USART1SW_LSE -#define RCC_USART1CLKSOURCE_HSI RCC_CFGR3_USART1SW_HSI - -/** - * @} - */ - -/** @defgroup RCC_I2C1_Clock_Source RCC I2C1 Clock Source - * @{ - */ -#define RCC_I2C1CLKSOURCE_HSI RCC_CFGR3_I2C1SW_HSI -#define RCC_I2C1CLKSOURCE_SYSCLK RCC_CFGR3_I2C1SW_SYSCLK - -/** - * @} - */ -/** @defgroup RCC_MCO_Index MCO Index - * @{ - */ -#define RCC_MCO1 (0x00000000U) -#define RCC_MCO RCC_MCO1 /*!< MCO1 to be compliant with other families with 2 MCOs*/ - -/** - * @} - */ - -/** @defgroup RCC_MCO_Clock_Source RCC MCO Clock Source - * @{ - */ -#define RCC_MCO1SOURCE_NOCLOCK RCC_CFGR_MCO_NOCLOCK -#define RCC_MCO1SOURCE_LSI RCC_CFGR_MCO_LSI -#define RCC_MCO1SOURCE_LSE RCC_CFGR_MCO_LSE -#define RCC_MCO1SOURCE_SYSCLK RCC_CFGR_MCO_SYSCLK -#define RCC_MCO1SOURCE_HSI RCC_CFGR_MCO_HSI -#define RCC_MCO1SOURCE_HSE RCC_CFGR_MCO_HSE -#define RCC_MCO1SOURCE_PLLCLK_DIV2 RCC_CFGR_MCO_PLL -#define RCC_MCO1SOURCE_HSI14 RCC_CFGR_MCO_HSI14 - -/** - * @} - */ - -/** @defgroup RCC_Interrupt Interrupts - * @{ - */ -#define RCC_IT_LSIRDY ((uint8_t)RCC_CIR_LSIRDYF) /*!< LSI Ready Interrupt flag */ -#define RCC_IT_LSERDY ((uint8_t)RCC_CIR_LSERDYF) /*!< LSE Ready Interrupt flag */ -#define RCC_IT_HSIRDY ((uint8_t)RCC_CIR_HSIRDYF) /*!< HSI Ready Interrupt flag */ -#define RCC_IT_HSERDY ((uint8_t)RCC_CIR_HSERDYF) /*!< HSE Ready Interrupt flag */ -#define RCC_IT_PLLRDY ((uint8_t)RCC_CIR_PLLRDYF) /*!< PLL Ready Interrupt flag */ -#define RCC_IT_HSI14RDY ((uint8_t)RCC_CIR_HSI14RDYF) /*!< HSI14 Ready Interrupt flag */ -#if defined(RCC_CIR_HSI48RDYF) -#define RCC_IT_HSI48RDY ((uint8_t)RCC_CIR_HSI48RDYF) /*!< HSI48 Ready Interrupt flag */ -#endif -#define RCC_IT_CSS ((uint8_t)RCC_CIR_CSSF) /*!< Clock Security System Interrupt flag */ -/** - * @} - */ - -/** @defgroup RCC_Flag Flags - * Elements values convention: XXXYYYYYb - * - YYYYY : Flag position in the register - * - XXX : Register index - * - 001: CR register - * - 010: CR2 register - * - 011: BDCR register - * - 0100: CSR register - * @{ - */ -/* Flags in the CR register */ -#define RCC_FLAG_HSIRDY ((uint8_t)((CR_REG_INDEX << 5U) | RCC_CR_HSIRDY_BitNumber)) -#define RCC_FLAG_HSERDY ((uint8_t)((CR_REG_INDEX << 5U) | RCC_CR_HSERDY_BitNumber)) -#define RCC_FLAG_PLLRDY ((uint8_t)((CR_REG_INDEX << 5U) | RCC_CR_PLLRDY_BitNumber)) -/* Flags in the CR2 register */ -#define RCC_FLAG_HSI14RDY ((uint8_t)((CR2_REG_INDEX << 5U) | RCC_CR2_HSI14RDY_BitNumber)) - -/* Flags in the CSR register */ -#define RCC_FLAG_LSIRDY ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_LSIRDY_BitNumber)) -#if defined(RCC_CSR_V18PWRRSTF) -#define RCC_FLAG_V18PWRRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_V18PWRRSTF_BitNumber)) -#endif -#define RCC_FLAG_OBLRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_OBLRSTF_BitNumber)) -#define RCC_FLAG_PINRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_PINRSTF_BitNumber)) /*!< PIN reset flag */ -#define RCC_FLAG_PORRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_PORRSTF_BitNumber)) /*!< POR/PDR reset flag */ -#define RCC_FLAG_SFTRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_SFTRSTF_BitNumber)) /*!< Software Reset flag */ -#define RCC_FLAG_IWDGRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_IWDGRSTF_BitNumber)) /*!< Independent Watchdog reset flag */ -#define RCC_FLAG_WWDGRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_WWDGRSTF_BitNumber)) /*!< Window watchdog reset flag */ -#define RCC_FLAG_LPWRRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_LPWRRSTF_BitNumber)) /*!< Low-Power reset flag */ - -/* Flags in the BDCR register */ -#define RCC_FLAG_LSERDY ((uint8_t)((BDCR_REG_INDEX << 5U) | RCC_BDCR_LSERDY_BitNumber)) /*!< External Low Speed oscillator Ready */ - -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ - -/** @defgroup RCC_Exported_Macros RCC Exported Macros - * @{ - */ - -/** @defgroup RCC_AHB_Clock_Enable_Disable RCC AHB Clock Enable Disable - * @brief Enable or disable the AHB peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOAEN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOAEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOBEN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOBEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOCEN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOFEN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOFEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CRC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_DMA1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SRAM_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHBENR, RCC_AHBENR_SRAMEN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_SRAMEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_FLITF_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHBENR, RCC_AHBENR_FLITFEN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FLITFEN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_GPIOA_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOAEN)) -#define __HAL_RCC_GPIOB_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOBEN)) -#define __HAL_RCC_GPIOC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOCEN)) -#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOFEN)) -#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_CRCEN)) -#define __HAL_RCC_DMA1_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA1EN)) -#define __HAL_RCC_SRAM_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_SRAMEN)) -#define __HAL_RCC_FLITF_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_FLITFEN)) -/** - * @} - */ - -/** @defgroup RCC_AHB_Peripheral_Clock_Enable_Disable_Status AHB Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOAEN)) != RESET) -#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOBEN)) != RESET) -#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOCEN)) != RESET) -#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOFEN)) != RESET) -#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_CRCEN)) != RESET) -#define __HAL_RCC_DMA1_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA1EN)) != RESET) -#define __HAL_RCC_SRAM_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_SRAMEN)) != RESET) -#define __HAL_RCC_FLITF_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_FLITFEN)) != RESET) -#define __HAL_RCC_GPIOA_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOAEN)) == RESET) -#define __HAL_RCC_GPIOB_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOBEN)) == RESET) -#define __HAL_RCC_GPIOC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOCEN)) == RESET) -#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOFEN)) == RESET) -#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_CRCEN)) == RESET) -#define __HAL_RCC_DMA1_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA1EN)) == RESET) -#define __HAL_RCC_SRAM_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_SRAMEN)) == RESET) -#define __HAL_RCC_FLITF_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_FLITFEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCC_APB1_Clock_Enable_Disable RCC APB1 Clock Enable Disable - * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_WWDG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_I2C1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_PWR_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN)) -#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN)) -#define __HAL_RCC_WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN)) -#define __HAL_RCC_I2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN)) -#define __HAL_RCC_PWR_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN)) -/** - * @} - */ - -/** @defgroup RCC_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET) -#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET) -#define __HAL_RCC_WWDG_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) != RESET) -#define __HAL_RCC_I2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) != RESET) -#define __HAL_RCC_PWR_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) != RESET) -#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET) -#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET) -#define __HAL_RCC_WWDG_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) == RESET) -#define __HAL_RCC_I2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) == RESET) -#define __HAL_RCC_PWR_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) == RESET) -/** - * @} - */ - - -/** @defgroup RCC_APB2_Clock_Enable_Disable RCC APB2 Clock Enable Disable - * @brief Enable or disable the High Speed APB (APB2) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_SYSCFG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ADC1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM16_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM17_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USART1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_DBGMCU_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DBGMCUEN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DBGMCUEN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_SYSCFG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SYSCFGEN)) -#define __HAL_RCC_ADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN)) -#define __HAL_RCC_TIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN)) -#define __HAL_RCC_SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN)) -#define __HAL_RCC_TIM16_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM16EN)) -#define __HAL_RCC_TIM17_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM17EN)) -#define __HAL_RCC_USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN)) -#define __HAL_RCC_DBGMCU_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_DBGMCUEN)) -/** - * @} - */ - -/** @defgroup RCC_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_SYSCFG_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) != RESET) -#define __HAL_RCC_ADC1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) != RESET) -#define __HAL_RCC_TIM1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) != RESET) -#define __HAL_RCC_SPI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) != RESET) -#define __HAL_RCC_TIM16_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM16EN)) != RESET) -#define __HAL_RCC_TIM17_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM17EN)) != RESET) -#define __HAL_RCC_USART1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) != RESET) -#define __HAL_RCC_DBGMCU_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DBGMCUEN)) != RESET) -#define __HAL_RCC_SYSCFG_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) == RESET) -#define __HAL_RCC_ADC1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) == RESET) -#define __HAL_RCC_TIM1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) == RESET) -#define __HAL_RCC_SPI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) == RESET) -#define __HAL_RCC_TIM16_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM16EN)) == RESET) -#define __HAL_RCC_TIM17_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM17EN)) == RESET) -#define __HAL_RCC_USART1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) == RESET) -#define __HAL_RCC_DBGMCU_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DBGMCUEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCC_AHB_Force_Release_Reset RCC AHB Force Release Reset - * @brief Force or release AHB peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB_FORCE_RESET() (RCC->AHBRSTR = 0xFFFFFFFFU) -#define __HAL_RCC_GPIOA_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOARST)) -#define __HAL_RCC_GPIOB_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOBRST)) -#define __HAL_RCC_GPIOC_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOCRST)) -#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOFRST)) - -#define __HAL_RCC_AHB_RELEASE_RESET() (RCC->AHBRSTR = 0x00000000U) -#define __HAL_RCC_GPIOA_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOARST)) -#define __HAL_RCC_GPIOB_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOBRST)) -#define __HAL_RCC_GPIOC_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOCRST)) -#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOFRST)) -/** - * @} - */ - -/** @defgroup RCC_APB1_Force_Release_Reset RCC APB1 Force Release Reset - * @brief Force or release APB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST)) -#define __HAL_RCC_WWDG_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST)) -#define __HAL_RCC_I2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST)) -#define __HAL_RCC_PWR_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST)) - -#define __HAL_RCC_APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00000000U) -#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST)) -#define __HAL_RCC_WWDG_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST)) -#define __HAL_RCC_I2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST)) -#define __HAL_RCC_PWR_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST)) -/** - * @} - */ - -/** @defgroup RCC_APB2_Force_Release_Reset RCC APB2 Force Release Reset - * @brief Force or release APB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_SYSCFG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SYSCFGRST)) -#define __HAL_RCC_ADC1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADC1RST)) -#define __HAL_RCC_TIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST)) -#define __HAL_RCC_SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST)) -#define __HAL_RCC_USART1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST)) -#define __HAL_RCC_TIM16_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM16RST)) -#define __HAL_RCC_TIM17_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM17RST)) -#define __HAL_RCC_DBGMCU_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_DBGMCURST)) - -#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00000000U) -#define __HAL_RCC_SYSCFG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SYSCFGRST)) -#define __HAL_RCC_ADC1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADC1RST)) -#define __HAL_RCC_TIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST)) -#define __HAL_RCC_SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST)) -#define __HAL_RCC_USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST)) -#define __HAL_RCC_TIM16_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM16RST)) -#define __HAL_RCC_TIM17_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM17RST)) -#define __HAL_RCC_DBGMCU_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_DBGMCURST)) -/** - * @} - */ -/** @defgroup RCC_HSI_Configuration HSI Configuration - * @{ - */ - -/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI). - * @note The HSI is stopped by hardware when entering STOP and STANDBY modes. - * @note HSI can not be stopped if it is used as system clock source. In this case, - * you have to select another source of the system clock then stop the HSI. - * @note After enabling the HSI, the application software should wait on HSIRDY - * flag to be set indicating that HSI clock is stable and can be used as - * system clock source. - * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator - * clock cycles. - */ -#define __HAL_RCC_HSI_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSION) -#define __HAL_RCC_HSI_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSION) - -/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value. - * @note The calibration is used to compensate for the variations in voltage - * and temperature that influence the frequency of the internal HSI RC. - * @param _HSICALIBRATIONVALUE_ specifies the calibration trimming value. - * (default is RCC_HSICALIBRATION_DEFAULT). - * This parameter must be a number between 0 and 0x1F. - */ -#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(_HSICALIBRATIONVALUE_) \ - MODIFY_REG(RCC->CR, RCC_CR_HSITRIM, (uint32_t)(_HSICALIBRATIONVALUE_) << RCC_CR_HSITRIM_BitNumber) - -/** - * @} - */ - -/** @defgroup RCC_LSI_Configuration LSI Configuration - * @{ - */ - -/** @brief Macro to enable the Internal Low Speed oscillator (LSI). - * @note After enabling the LSI, the application software should wait on - * LSIRDY flag to be set indicating that LSI clock is stable and can - * be used to clock the IWDG and/or the RTC. - */ -#define __HAL_RCC_LSI_ENABLE() SET_BIT(RCC->CSR, RCC_CSR_LSION) - -/** @brief Macro to disable the Internal Low Speed oscillator (LSI). - * @note LSI can not be disabled if the IWDG is running. - * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator - * clock cycles. - */ -#define __HAL_RCC_LSI_DISABLE() CLEAR_BIT(RCC->CSR, RCC_CSR_LSION) - -/** - * @} - */ - -/** @defgroup RCC_HSE_Configuration HSE Configuration - * @{ - */ - -/** - * @brief Macro to configure the External High Speed oscillator (HSE). - * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not - * supported by this macro. User should request a transition to HSE Off - * first and then HSE On or HSE Bypass. - * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application - * software should wait on HSERDY flag to be set indicating that HSE clock - * is stable and can be used to clock the PLL and/or system clock. - * @note HSE state can not be changed if it is used directly or through the - * PLL as system clock. In this case, you have to select another source - * of the system clock then change the HSE state (ex. disable it). - * @note The HSE is stopped by hardware when entering STOP and STANDBY modes. - * @note This function reset the CSSON bit, so if the clock security system(CSS) - * was previously enabled you have to enable it again after calling this - * function. - * @param __STATE__ specifies the new state of the HSE. - * This parameter can be one of the following values: - * @arg @ref RCC_HSE_OFF turn OFF the HSE oscillator, HSERDY flag goes low after - * 6 HSE oscillator clock cycles. - * @arg @ref RCC_HSE_ON turn ON the HSE oscillator - * @arg @ref RCC_HSE_BYPASS HSE oscillator bypassed with external clock - */ -#define __HAL_RCC_HSE_CONFIG(__STATE__) \ - do{ \ - if ((__STATE__) == RCC_HSE_ON) \ - { \ - SET_BIT(RCC->CR, RCC_CR_HSEON); \ - } \ - else if ((__STATE__) == RCC_HSE_OFF) \ - { \ - CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ - CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ - } \ - else if ((__STATE__) == RCC_HSE_BYPASS) \ - { \ - SET_BIT(RCC->CR, RCC_CR_HSEBYP); \ - SET_BIT(RCC->CR, RCC_CR_HSEON); \ - } \ - else \ - { \ - CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ - CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ - } \ - }while(0U) - -/** - * @brief Macro to configure the External High Speed oscillator (HSE) Predivision factor for PLL. - * @note Predivision factor can not be changed if PLL is used as system clock - * In this case, you have to select another source of the system clock, disable the PLL and - * then change the HSE predivision factor. - * @param __HSE_PREDIV_VALUE__ specifies the division value applied to HSE. - * This parameter must be a number between RCC_HSE_PREDIV_DIV1 and RCC_HSE_PREDIV_DIV16. - */ -#define __HAL_RCC_HSE_PREDIV_CONFIG(__HSE_PREDIV_VALUE__) \ - MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, (uint32_t)(__HSE_PREDIV_VALUE__)) - -/** - * @} - */ - -/** @defgroup RCC_LSE_Configuration LSE Configuration - * @{ - */ - -/** - * @brief Macro to configure the External Low Speed oscillator (LSE). - * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not supported by this macro. - * @note As the LSE is in the Backup domain and write access is denied to - * this domain after reset, you have to enable write access using - * @ref HAL_PWR_EnableBkUpAccess() function before to configure the LSE - * (to be done once after reset). - * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application - * software should wait on LSERDY flag to be set indicating that LSE clock - * is stable and can be used to clock the RTC. - * @param __STATE__ specifies the new state of the LSE. - * This parameter can be one of the following values: - * @arg @ref RCC_LSE_OFF turn OFF the LSE oscillator, LSERDY flag goes low after - * 6 LSE oscillator clock cycles. - * @arg @ref RCC_LSE_ON turn ON the LSE oscillator. - * @arg @ref RCC_LSE_BYPASS LSE oscillator bypassed with external clock. - */ -#define __HAL_RCC_LSE_CONFIG(__STATE__) \ - do{ \ - if ((__STATE__) == RCC_LSE_ON) \ - { \ - SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ - } \ - else if ((__STATE__) == RCC_LSE_OFF) \ - { \ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ - } \ - else if ((__STATE__) == RCC_LSE_BYPASS) \ - { \ - SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ - SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ - } \ - else \ - { \ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ - } \ - }while(0U) - -/** - * @} - */ - -/** @defgroup RCC_HSI14_Configuration RCC_HSI14_Configuration - * @{ - */ - -/** @brief Macro to enable the Internal 14Mhz High Speed oscillator (HSI14). - * @note After enabling the HSI14 with @ref __HAL_RCC_HSI14_ENABLE(), the application software - * should wait on HSI14RDY flag to be set indicating that HSI clock is stable and can be - * used as system clock source. This is not necessary if @ref HAL_RCC_OscConfig() is used. - * clock cycles. - */ -#define __HAL_RCC_HSI14_ENABLE() SET_BIT(RCC->CR2, RCC_CR2_HSI14ON) - -/** @brief Macro to disable the Internal 14Mhz High Speed oscillator (HSI14). - * @note The HSI14 is stopped by hardware when entering STOP and STANDBY modes. - * @note HSI14 can not be stopped if it is used as system clock source. In this case, - * you have to select another source of the system clock then stop the HSI14. - * @note When the HSI14 is stopped, HSI14RDY flag goes low after 6 HSI14 oscillator - * clock cycles. - */ -#define __HAL_RCC_HSI14_DISABLE() CLEAR_BIT(RCC->CR2, RCC_CR2_HSI14ON) - -/** @brief Macro to enable the Internal 14Mhz High Speed oscillator (HSI14) used by ADC. - */ -#define __HAL_RCC_HSI14ADC_ENABLE() CLEAR_BIT(RCC->CR2, RCC_CR2_HSI14DIS) - -/** @brief Macro to disable the Internal 14Mhz High Speed oscillator (HSI14) used by ADC. - */ -#define __HAL_RCC_HSI14ADC_DISABLE() SET_BIT(RCC->CR2, RCC_CR2_HSI14DIS) - -/** @brief Macro to adjust the Internal 14Mhz High Speed oscillator (HSI) calibration value. - * @note The calibration is used to compensate for the variations in voltage - * and temperature that influence the frequency of the internal HSI14 RC. - * @param __HSI14CALIBRATIONVALUE__ specifies the calibration trimming value - * (default is RCC_HSI14CALIBRATION_DEFAULT). - * This parameter must be a number between 0 and 0x1F. - */ -#define __HAL_RCC_HSI14_CALIBRATIONVALUE_ADJUST(__HSI14CALIBRATIONVALUE__) \ - MODIFY_REG(RCC->CR2, RCC_CR2_HSI14TRIM, (uint32_t)(__HSI14CALIBRATIONVALUE__) << RCC_HSI14TRIM_BIT_NUMBER) -/** - * @} - */ - -/** @defgroup RCC_USARTx_Clock_Config RCC USARTx Clock Config - * @{ - */ - -/** @brief Macro to configure the USART1 clock (USART1CLK). - * @param __USART1CLKSOURCE__ specifies the USART1 clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock - * @arg @ref RCC_USART1CLKSOURCE_HSI HSI selected as USART1 clock - * @arg @ref RCC_USART1CLKSOURCE_SYSCLK System Clock selected as USART1 clock - * @arg @ref RCC_USART1CLKSOURCE_LSE LSE selected as USART1 clock - */ -#define __HAL_RCC_USART1_CONFIG(__USART1CLKSOURCE__) \ - MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART1SW, (uint32_t)(__USART1CLKSOURCE__)) - -/** @brief Macro to get the USART1 clock source. - * @retval The clock source can be one of the following values: - * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock - * @arg @ref RCC_USART1CLKSOURCE_HSI HSI selected as USART1 clock - * @arg @ref RCC_USART1CLKSOURCE_SYSCLK System Clock selected as USART1 clock - * @arg @ref RCC_USART1CLKSOURCE_LSE LSE selected as USART1 clock - */ -#define __HAL_RCC_GET_USART1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART1SW))) - -/** - * @} - */ - -/** @defgroup RCC_I2Cx_Clock_Config RCC I2Cx Clock Config - * @{ - */ - -/** @brief Macro to configure the I2C1 clock (I2C1CLK). - * @param __I2C1CLKSOURCE__ specifies the I2C1 clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_I2C1CLKSOURCE_HSI HSI selected as I2C1 clock - * @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock - */ -#define __HAL_RCC_I2C1_CONFIG(__I2C1CLKSOURCE__) \ - MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C1SW, (uint32_t)(__I2C1CLKSOURCE__)) - -/** @brief Macro to get the I2C1 clock source. - * @retval The clock source can be one of the following values: - * @arg @ref RCC_I2C1CLKSOURCE_HSI HSI selected as I2C1 clock - * @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock - */ -#define __HAL_RCC_GET_I2C1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C1SW))) -/** - * @} - */ - -/** @defgroup RCC_PLL_Configuration PLL Configuration - * @{ - */ - -/** @brief Macro to enable the main PLL. - * @note After enabling the main PLL, the application software should wait on - * PLLRDY flag to be set indicating that PLL clock is stable and can - * be used as system clock source. - * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes. - */ -#define __HAL_RCC_PLL_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLLON) - -/** @brief Macro to disable the main PLL. - * @note The main PLL can not be disabled if it is used as system clock source - */ -#define __HAL_RCC_PLL_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLLON) - -/** @brief Macro to configure the PLL clock source, multiplication and division factors. - * @note This function must be used only when the main PLL is disabled. - * - * @param __RCC_PLLSOURCE__ specifies the PLL entry clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_PLLSOURCE_HSI HSI oscillator clock selected as PLL clock entry - * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL clock entry - * @param __PLLMUL__ specifies the multiplication factor for PLL VCO output clock - * This parameter can be one of the following values: - * This parameter must be a number between RCC_PLL_MUL2 and RCC_PLL_MUL16. - * @param __PREDIV__ specifies the predivider factor for PLL VCO input clock - * This parameter must be a number between RCC_PREDIV_DIV1 and RCC_PREDIV_DIV16. - * - */ -#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSOURCE__ , __PREDIV__, __PLLMUL__) \ - do { \ - MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, (__PREDIV__)); \ - MODIFY_REG(RCC->CFGR, RCC_CFGR_PLLMUL | RCC_CFGR_PLLSRC, (uint32_t)((__PLLMUL__)|(__RCC_PLLSOURCE__))); \ - } while(0U) - - -/** @brief Get oscillator clock selected as PLL input clock - * @retval The clock source used for PLL entry. The returned value can be one - * of the following: - * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL input clock - */ -#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLSRC))) - -/** - * @} - */ - -/** @defgroup RCC_Get_Clock_source Get Clock source - * @{ - */ - -/** - * @brief Macro to configure the system clock source. - * @param __SYSCLKSOURCE__ specifies the system clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_SYSCLKSOURCE_HSI HSI oscillator is used as system clock source. - * @arg @ref RCC_SYSCLKSOURCE_HSE HSE oscillator is used as system clock source. - * @arg @ref RCC_SYSCLKSOURCE_PLLCLK PLL output is used as system clock source. - */ -#define __HAL_RCC_SYSCLK_CONFIG(__SYSCLKSOURCE__) \ - MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__SYSCLKSOURCE__)) - -/** @brief Macro to get the clock source used as system clock. - * @retval The clock source used as system clock. The returned value can be one - * of the following: - * @arg @ref RCC_SYSCLKSOURCE_STATUS_HSI HSI used as system clock - * @arg @ref RCC_SYSCLKSOURCE_STATUS_HSE HSE used as system clock - * @arg @ref RCC_SYSCLKSOURCE_STATUS_PLLCLK PLL used as system clock - */ -#define __HAL_RCC_GET_SYSCLK_SOURCE() ((uint32_t)(RCC->CFGR & RCC_CFGR_SWS)) - -/** - * @} - */ - -/** @defgroup RCCEx_MCOx_Clock_Config RCC Extended MCOx Clock Config - * @{ - */ - -#if defined(RCC_CFGR_MCOPRE) -/** @brief Macro to configure the MCO clock. - * @param __MCOCLKSOURCE__ specifies the MCO clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_MCO1SOURCE_NOCLOCK No clock selected as MCO clock - * @arg @ref RCC_MCO1SOURCE_SYSCLK System Clock selected as MCO clock - * @arg @ref RCC_MCO1SOURCE_HSI HSI oscillator clock selected as MCO clock - * @arg @ref RCC_MCO1SOURCE_HSE HSE selected as MCO clock - * @arg @ref RCC_MCO1SOURCE_LSI LSI selected as MCO clock - * @arg @ref RCC_MCO1SOURCE_LSE LSE selected as MCO clock - * @arg @ref RCC_MCO1SOURCE_HSI14 HSI14 selected as MCO clock - @if STM32F042x6 - * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock - * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock - @elseif STM32F048xx - * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock - * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock - @elseif STM32F071xB - * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock - * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock - @elseif STM32F072xB - * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock - * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock - @elseif STM32F078xx - * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock - * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock - @elseif STM32F091xC - * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock - * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock - @elseif STM32F098xx - * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock - * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock - @elseif STM32F030x6 - * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock - @elseif STM32F030xC - * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock - @elseif STM32F031x6 - * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock - @elseif STM32F038xx - * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock - @elseif STM32F070x6 - * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock - @elseif STM32F070xB - * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock - @endif - * @arg @ref RCC_MCO1SOURCE_PLLCLK_DIV2 PLLCLK Divided by 2 selected as MCO clock - * @param __MCODIV__ specifies the MCO clock prescaler. - * This parameter can be one of the following values: - * @arg @ref RCC_MCODIV_1 MCO clock source is divided by 1 - * @arg @ref RCC_MCODIV_2 MCO clock source is divided by 2 - * @arg @ref RCC_MCODIV_4 MCO clock source is divided by 4 - * @arg @ref RCC_MCODIV_8 MCO clock source is divided by 8 - * @arg @ref RCC_MCODIV_16 MCO clock source is divided by 16 - * @arg @ref RCC_MCODIV_32 MCO clock source is divided by 32 - * @arg @ref RCC_MCODIV_64 MCO clock source is divided by 64 - * @arg @ref RCC_MCODIV_128 MCO clock source is divided by 128 - */ -#else -/** @brief Macro to configure the MCO clock. - * @param __MCOCLKSOURCE__ specifies the MCO clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_MCO1SOURCE_NOCLOCK No clock selected as MCO clock - * @arg @ref RCC_MCO1SOURCE_SYSCLK System Clock selected as MCO clock - * @arg @ref RCC_MCO1SOURCE_HSI HSI selected as MCO clock - * @arg @ref RCC_MCO1SOURCE_HSE HSE selected as MCO clock - * @arg @ref RCC_MCO1SOURCE_LSI LSI selected as MCO clock - * @arg @ref RCC_MCO1SOURCE_LSE LSE selected as MCO clock - * @arg @ref RCC_MCO1SOURCE_HSI14 HSI14 selected as MCO clock - * @arg @ref RCC_MCO1SOURCE_PLLCLK_DIV2 PLLCLK Divided by 2 selected as MCO clock - * @param __MCODIV__ specifies the MCO clock prescaler. - * This parameter can be one of the following values: - * @arg @ref RCC_MCODIV_1 No division applied on MCO clock source - */ -#endif -#if defined(RCC_CFGR_MCOPRE) -#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ - MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO | RCC_CFGR_MCOPRE), ((__MCOCLKSOURCE__) | (__MCODIV__))) -#else - -#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ - MODIFY_REG(RCC->CFGR, RCC_CFGR_MCO, (__MCOCLKSOURCE__)) - -#endif - -/** - * @} - */ - - /** @defgroup RCC_RTC_Clock_Configuration RCC RTC Clock Configuration - * @{ - */ - -/** @brief Macro to configure the RTC clock (RTCCLK). - * @note As the RTC clock configuration bits are in the Backup domain and write - * access is denied to this domain after reset, you have to enable write - * access using the Power Backup Access macro before to configure - * the RTC clock source (to be done once after reset). - * @note Once the RTC clock is configured it cannot be changed unless the - * Backup domain is reset using @ref __HAL_RCC_BACKUPRESET_FORCE() macro, or by - * a Power On Reset (POR). - * - * @param __RTC_CLKSOURCE__ specifies the RTC clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_RTCCLKSOURCE_NO_CLK No clock selected as RTC clock - * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock - * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock - * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV32 HSE clock divided by 32 - * @note If the LSE or LSI is used as RTC clock source, the RTC continues to - * work in STOP and STANDBY modes, and can be used as wakeup source. - * However, when the LSI clock and HSE clock divided by 32 is used as RTC clock source, - * the RTC cannot be used in STOP and STANDBY modes. - * @note The system must always be configured so as to get a PCLK frequency greater than or - * equal to the RTCCLK frequency for a proper operation of the RTC. - */ -#define __HAL_RCC_RTC_CONFIG(__RTC_CLKSOURCE__) MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, (__RTC_CLKSOURCE__)) - -/** @brief Macro to get the RTC clock source. - * @retval The clock source can be one of the following values: - * @arg @ref RCC_RTCCLKSOURCE_NO_CLK No clock selected as RTC clock - * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock - * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock - * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV32 HSE clock divided by 32 - */ -#define __HAL_RCC_GET_RTC_SOURCE() (READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)) - -/** @brief Macro to enable the the RTC clock. - * @note These macros must be used only after the RTC clock source was selected. - */ -#define __HAL_RCC_RTC_ENABLE() SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN) - -/** @brief Macro to disable the the RTC clock. - * @note These macros must be used only after the RTC clock source was selected. - */ -#define __HAL_RCC_RTC_DISABLE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN) - -/** @brief Macro to force the Backup domain reset. - * @note This function resets the RTC peripheral (including the backup registers) - * and the RTC clock source selection in RCC_BDCR register. - */ -#define __HAL_RCC_BACKUPRESET_FORCE() SET_BIT(RCC->BDCR, RCC_BDCR_BDRST) - -/** @brief Macros to release the Backup domain reset. - */ -#define __HAL_RCC_BACKUPRESET_RELEASE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST) - -/** - * @} - */ - -/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management - * @brief macros to manage the specified RCC Flags and interrupts. - * @{ - */ - -/** @brief Enable RCC interrupt. - * @param __INTERRUPT__ specifies the RCC interrupt sources to be enabled. - * This parameter can be any combination of the following values: - * @arg @ref RCC_IT_LSIRDY LSI ready interrupt - * @arg @ref RCC_IT_LSERDY LSE ready interrupt - * @arg @ref RCC_IT_HSIRDY HSI ready interrupt - * @arg @ref RCC_IT_HSERDY HSE ready interrupt - * @arg @ref RCC_IT_PLLRDY main PLL ready interrupt - * @arg @ref RCC_IT_HSI14RDY HSI14 ready interrupt - @if STM32F042x6 - * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt - @elseif STM32F048xx - * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt - @elseif STM32F071xB - * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt - @elseif STM32F072xB - * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt - @elseif STM32F078xx - * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt - @elseif STM32F091xC - * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt - @elseif STM32F098xx - * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt - @endif - */ -#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS |= (__INTERRUPT__)) - -/** @brief Disable RCC interrupt. - * @param __INTERRUPT__ specifies the RCC interrupt sources to be disabled. - * This parameter can be any combination of the following values: - * @arg @ref RCC_IT_LSIRDY LSI ready interrupt - * @arg @ref RCC_IT_LSERDY LSE ready interrupt - * @arg @ref RCC_IT_HSIRDY HSI ready interrupt - * @arg @ref RCC_IT_HSERDY HSE ready interrupt - * @arg @ref RCC_IT_PLLRDY main PLL ready interrupt - * @arg @ref RCC_IT_HSI14RDY HSI14 ready interrupt - @if STM32F042x6 - * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt - @elseif STM32F048xx - * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt - @elseif STM32F071xB - * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt - @elseif STM32F072xB - * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt - @elseif STM32F078xx - * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt - @elseif STM32F091xC - * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt - @elseif STM32F098xx - * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt - @endif - */ -#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS &= (uint8_t)(~(__INTERRUPT__))) - -/** @brief Clear the RCC's interrupt pending bits. - * @param __INTERRUPT__ specifies the interrupt pending bit to clear. - * This parameter can be any combination of the following values: - * @arg @ref RCC_IT_LSIRDY LSI ready interrupt. - * @arg @ref RCC_IT_LSERDY LSE ready interrupt. - * @arg @ref RCC_IT_HSIRDY HSI ready interrupt. - * @arg @ref RCC_IT_HSERDY HSE ready interrupt. - * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt. - * @arg @ref RCC_IT_CSS Clock Security System interrupt - * @arg @ref RCC_IT_HSI14RDY HSI14 ready interrupt - @if STM32F042x6 - * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt - @elseif STM32F048xx - * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt - @elseif STM32F071xB - * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt - @elseif STM32F072xB - * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt - @elseif STM32F078xx - * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt - @elseif STM32F091xC - * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt - @elseif STM32F098xx - * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt - @endif - */ -#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE2_ADDRESS = (__INTERRUPT__)) - -/** @brief Check the RCC's interrupt has occurred or not. - * @param __INTERRUPT__ specifies the RCC interrupt source to check. - * This parameter can be one of the following values: - * @arg @ref RCC_IT_LSIRDY LSI ready interrupt. - * @arg @ref RCC_IT_LSERDY LSE ready interrupt. - * @arg @ref RCC_IT_HSIRDY HSI ready interrupt. - * @arg @ref RCC_IT_HSERDY HSE ready interrupt. - * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt. - * @arg @ref RCC_IT_CSS Clock Security System interrupt - * @arg @ref RCC_IT_HSI14RDY HSI14 ready interrupt enable - @if STM32F042x6 - * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt - @elseif STM32F048xx - * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt - @elseif STM32F071xB - * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt - @elseif STM32F072xB - * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt - @elseif STM32F078xx - * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt - @elseif STM32F091xC - * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt - @elseif STM32F098xx - * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt - @endif - * @retval The new state of __INTERRUPT__ (TRUE or FALSE). - */ -#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIR & (__INTERRUPT__)) == (__INTERRUPT__)) - -/** @brief Set RMVF bit to clear the reset flags. - * The reset flags are RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST, - * RCC_FLAG_OBLRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST - */ -#define __HAL_RCC_CLEAR_RESET_FLAGS() (RCC->CSR |= RCC_CSR_RMVF) - -/** @brief Check RCC flag is set or not. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg @ref RCC_FLAG_HSIRDY HSI oscillator clock ready. - * @arg @ref RCC_FLAG_HSERDY HSE oscillator clock ready. - * @arg @ref RCC_FLAG_PLLRDY Main PLL clock ready. - * @arg @ref RCC_FLAG_HSI14RDY HSI14 oscillator clock ready - @if STM32F038xx - * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain - @elseif STM32F042x6 - * @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready - @elseif STM32F048xx - * @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready - * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain - @elseif STM32F058xx - * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain - @elseif STM32F071xB - * @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready - @elseif STM32F072xB - * @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready - @elseif STM32F078xx - * @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready - * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain - @elseif STM32F091xC - * @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready - @elseif STM32F098xx - * @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready - * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain - @endif - * @arg @ref RCC_FLAG_LSERDY LSE oscillator clock ready. - * @arg @ref RCC_FLAG_LSIRDY LSI oscillator clock ready. - * @arg @ref RCC_FLAG_OBLRST Option Byte Load reset - * @arg @ref RCC_FLAG_PINRST Pin reset. - * @arg @ref RCC_FLAG_PORRST POR/PDR reset. - * @arg @ref RCC_FLAG_SFTRST Software reset. - * @arg @ref RCC_FLAG_IWDGRST Independent Watchdog reset. - * @arg @ref RCC_FLAG_WWDGRST Window Watchdog reset. - * @arg @ref RCC_FLAG_LPWRRST Low Power reset. - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_RCC_GET_FLAG(__FLAG__) (((((__FLAG__) >> 5U) == CR_REG_INDEX)? RCC->CR : \ - (((__FLAG__) >> 5U) == CR2_REG_INDEX)? RCC->CR2 : \ - (((__FLAG__) >> 5U) == BDCR_REG_INDEX) ? RCC->BDCR : \ - RCC->CSR) & (1U << ((__FLAG__) & RCC_FLAG_MASK))) - -/** - * @} - */ - -/** - * @} - */ - -/* Include RCC HAL Extension module */ -#include "stm32f0xx_hal_rcc_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup RCC_Exported_Functions - * @{ - */ - -/** @addtogroup RCC_Exported_Functions_Group1 - * @{ - */ - -/* Initialization and de-initialization functions ******************************/ -HAL_StatusTypeDef HAL_RCC_DeInit(void); -HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); -HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency); - -/** - * @} - */ - -/** @addtogroup RCC_Exported_Functions_Group2 - * @{ - */ - -/* Peripheral Control functions ************************************************/ -void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv); -void HAL_RCC_EnableCSS(void); -/* CSS NMI IRQ handler */ -void HAL_RCC_NMI_IRQHandler(void); -/* User Callbacks in non blocking mode (IT mode) */ -void HAL_RCC_CSSCallback(void); -void HAL_RCC_DisableCSS(void); -uint32_t HAL_RCC_GetSysClockFreq(void); -uint32_t HAL_RCC_GetHCLKFreq(void); -uint32_t HAL_RCC_GetPCLK1Freq(void); -void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); -void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency); - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F0xx_HAL_RCC_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - -- cgit