From 94f94260ace13688285fc8c62687079b26c18854 Mon Sep 17 00:00:00 2001 From: jaseg Date: Sun, 20 Dec 2020 15:18:02 +0100 Subject: Submodule-cache WIP --- .../STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h | 296 --------------------- 1 file changed, 296 deletions(-) delete mode 100644 fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h (limited to 'fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h') diff --git a/fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h b/fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h deleted file mode 100644 index fa58dd9..0000000 --- a/fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h +++ /dev/null @@ -1,296 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f0xx_hal_gpio.h - * @author MCD Application Team - * @brief Header file of GPIO HAL module. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F0xx_HAL_GPIO_H -#define __STM32F0xx_HAL_GPIO_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f0xx_hal_def.h" - -/** @addtogroup STM32F0xx_HAL_Driver - * @{ - */ - -/** @addtogroup GPIO - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup GPIO_Exported_Types GPIO Exported Types - * @{ - */ -/** - * @brief GPIO Init structure definition - */ -typedef struct -{ - uint32_t Pin; /*!< Specifies the GPIO pins to be configured. - This parameter can be any value of @ref GPIO_pins */ - - uint32_t Mode; /*!< Specifies the operating mode for the selected pins. - This parameter can be a value of @ref GPIO_mode */ - - uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins. - This parameter can be a value of @ref GPIO_pull */ - - uint32_t Speed; /*!< Specifies the speed for the selected pins. - This parameter can be a value of @ref GPIO_speed */ - - uint32_t Alternate; /*!< Peripheral to be connected to the selected pins - This parameter can be a value of @ref GPIOEx_Alternate_function_selection */ -}GPIO_InitTypeDef; - -/** - * @brief GPIO Bit SET and Bit RESET enumeration - */ -typedef enum -{ - GPIO_PIN_RESET = 0U, - GPIO_PIN_SET -}GPIO_PinState; -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup GPIO_Exported_Constants GPIO Exported Constants - * @{ - */ -/** @defgroup GPIO_pins GPIO pins - * @{ - */ -#define GPIO_PIN_0 ((uint16_t)0x0001U) /* Pin 0 selected */ -#define GPIO_PIN_1 ((uint16_t)0x0002U) /* Pin 1 selected */ -#define GPIO_PIN_2 ((uint16_t)0x0004U) /* Pin 2 selected */ -#define GPIO_PIN_3 ((uint16_t)0x0008U) /* Pin 3 selected */ -#define GPIO_PIN_4 ((uint16_t)0x0010U) /* Pin 4 selected */ -#define GPIO_PIN_5 ((uint16_t)0x0020U) /* Pin 5 selected */ -#define GPIO_PIN_6 ((uint16_t)0x0040U) /* Pin 6 selected */ -#define GPIO_PIN_7 ((uint16_t)0x0080U) /* Pin 7 selected */ -#define GPIO_PIN_8 ((uint16_t)0x0100U) /* Pin 8 selected */ -#define GPIO_PIN_9 ((uint16_t)0x0200U) /* Pin 9 selected */ -#define GPIO_PIN_10 ((uint16_t)0x0400U) /* Pin 10 selected */ -#define GPIO_PIN_11 ((uint16_t)0x0800U) /* Pin 11 selected */ -#define GPIO_PIN_12 ((uint16_t)0x1000U) /* Pin 12 selected */ -#define GPIO_PIN_13 ((uint16_t)0x2000U) /* Pin 13 selected */ -#define GPIO_PIN_14 ((uint16_t)0x4000U) /* Pin 14 selected */ -#define GPIO_PIN_15 ((uint16_t)0x8000U) /* Pin 15 selected */ -#define GPIO_PIN_All ((uint16_t)0xFFFFU) /* All pins selected */ - -#define GPIO_PIN_MASK (0x0000FFFFU) /* PIN mask for assert test */ -/** - * @} - */ - -/** @defgroup GPIO_mode GPIO mode - * @brief GPIO Configuration Mode - * Elements values convention: 0xX0yz00YZ - * - X : GPIO mode or EXTI Mode - * - y : External IT or Event trigger detection - * - z : IO configuration on External IT or Event - * - Y : Output type (Push Pull or Open Drain) - * - Z : IO Direction mode (Input, Output, Alternate or Analog) - * @{ - */ -#define GPIO_MODE_INPUT (0x00000000U) /*!< Input Floating Mode */ -#define GPIO_MODE_OUTPUT_PP (0x00000001U) /*!< Output Push Pull Mode */ -#define GPIO_MODE_OUTPUT_OD (0x00000011U) /*!< Output Open Drain Mode */ -#define GPIO_MODE_AF_PP (0x00000002U) /*!< Alternate Function Push Pull Mode */ -#define GPIO_MODE_AF_OD (0x00000012U) /*!< Alternate Function Open Drain Mode */ -#define GPIO_MODE_ANALOG (0x00000003U) /*!< Analog Mode */ -#define GPIO_MODE_IT_RISING (0x10110000U) /*!< External Interrupt Mode with Rising edge trigger detection */ -#define GPIO_MODE_IT_FALLING (0x10210000U) /*!< External Interrupt Mode with Falling edge trigger detection */ -#define GPIO_MODE_IT_RISING_FALLING (0x10310000U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ -#define GPIO_MODE_EVT_RISING (0x10120000U) /*!< External Event Mode with Rising edge trigger detection */ -#define GPIO_MODE_EVT_FALLING (0x10220000U) /*!< External Event Mode with Falling edge trigger detection */ -#define GPIO_MODE_EVT_RISING_FALLING (0x10320000U) /*!< External Event Mode with Rising/Falling edge trigger detection */ -/** - * @} - */ - -/** @defgroup GPIO_speed GPIO speed - * @brief GPIO Output Maximum frequency - * @{ - */ -#define GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< range up to 2 MHz, please refer to the product datasheet */ -#define GPIO_SPEED_FREQ_MEDIUM (0x00000001U) /*!< range 4 MHz to 10 MHz, please refer to the product datasheet */ -#define GPIO_SPEED_FREQ_HIGH (0x00000003U) /*!< range 10 MHz to 50 MHz, please refer to the product datasheet */ -/** - * @} - */ - - /** @defgroup GPIO_pull GPIO pull - * @brief GPIO Pull-Up or Pull-Down Activation - * @{ - */ -#define GPIO_NOPULL (0x00000000U) /*!< No Pull-up or Pull-down activation */ -#define GPIO_PULLUP (0x00000001U) /*!< Pull-up activation */ -#define GPIO_PULLDOWN (0x00000002U) /*!< Pull-down activation */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup GPIO_Exported_Macros GPIO Exported Macros - * @{ - */ - -/** - * @brief Check whether the specified EXTI line flag is set or not. - * @param __EXTI_LINE__ specifies the EXTI line flag to check. - * This parameter can be GPIO_PIN_x where x can be(0..15) - * @retval The new state of __EXTI_LINE__ (SET or RESET). - */ -#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__)) - -/** - * @brief Clear the EXTI's line pending flags. - * @param __EXTI_LINE__ specifies the EXTI lines flags to clear. - * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) - * @retval None - */ -#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__)) - -/** - * @brief Check whether the specified EXTI line is asserted or not. - * @param __EXTI_LINE__ specifies the EXTI line to check. - * This parameter can be GPIO_PIN_x where x can be(0..15) - * @retval The new state of __EXTI_LINE__ (SET or RESET). - */ -#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__)) - -/** - * @brief Clear the EXTI's line pending bits. - * @param __EXTI_LINE__ specifies the EXTI lines to clear. - * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) - * @retval None - */ -#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__)) - -/** - * @brief Generate a Software interrupt on selected EXTI line. - * @param __EXTI_LINE__ specifies the EXTI line to check. - * This parameter can be GPIO_PIN_x where x can be(0..15) - * @retval None - */ -#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__)) - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @addtogroup GPIO_Private_Macros GPIO Private Macros - * @{ - */ -#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET)) - -#define IS_GPIO_PIN(__PIN__) (((((uint32_t)__PIN__) & GPIO_PIN_MASK) != 0x00U) &&\ - ((((uint32_t)__PIN__) & ~GPIO_PIN_MASK) == 0x00U)) - -#define IS_GPIO_MODE(__MODE__) (((__MODE__) == GPIO_MODE_INPUT) ||\ - ((__MODE__) == GPIO_MODE_OUTPUT_PP) ||\ - ((__MODE__) == GPIO_MODE_OUTPUT_OD) ||\ - ((__MODE__) == GPIO_MODE_AF_PP) ||\ - ((__MODE__) == GPIO_MODE_AF_OD) ||\ - ((__MODE__) == GPIO_MODE_IT_RISING) ||\ - ((__MODE__) == GPIO_MODE_IT_FALLING) ||\ - ((__MODE__) == GPIO_MODE_IT_RISING_FALLING) ||\ - ((__MODE__) == GPIO_MODE_EVT_RISING) ||\ - ((__MODE__) == GPIO_MODE_EVT_FALLING) ||\ - ((__MODE__) == GPIO_MODE_EVT_RISING_FALLING) ||\ - ((__MODE__) == GPIO_MODE_ANALOG)) - -#define IS_GPIO_SPEED(__SPEED__) (((__SPEED__) == GPIO_SPEED_FREQ_LOW) ||\ - ((__SPEED__) == GPIO_SPEED_FREQ_MEDIUM) ||\ - ((__SPEED__) == GPIO_SPEED_FREQ_HIGH)) - -#define IS_GPIO_PULL(__PULL__) (((__PULL__) == GPIO_NOPULL) ||\ - ((__PULL__) == GPIO_PULLUP) || \ - ((__PULL__) == GPIO_PULLDOWN)) -/** - * @} - */ - -/* Include GPIO HAL Extended module */ -#include "stm32f0xx_hal_gpio_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup GPIO_Exported_Functions GPIO Exported Functions - * @{ - */ - -/** @addtogroup GPIO_Exported_Functions_Group1 Initialization/de-initialization functions - * @brief Initialization and Configuration functions - * @{ - */ - -/* Initialization and de-initialization functions *****************************/ -void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init); -void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin); - -/** - * @} - */ - -/** @addtogroup GPIO_Exported_Functions_Group2 IO operation functions - * @{ - */ - -/* IO operation functions *****************************************************/ -GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState); -void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin); -void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin); - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F0xx_HAL_GPIO_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit