From 94f94260ace13688285fc8c62687079b26c18854 Mon Sep 17 00:00:00 2001 From: jaseg Date: Sun, 20 Dec 2020 15:18:02 +0100 Subject: Submodule-cache WIP --- .../STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_adc.h | 1019 -------------------- 1 file changed, 1019 deletions(-) delete mode 100644 fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_adc.h (limited to 'fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_adc.h') diff --git a/fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_adc.h b/fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_adc.h deleted file mode 100644 index 31771b1..0000000 --- a/fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_adc.h +++ /dev/null @@ -1,1019 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f0xx_hal_adc.h - * @author MCD Application Team - * @brief Header file containing functions prototypes of ADC HAL library. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F0xx_HAL_ADC_H -#define STM32F0xx_HAL_ADC_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f0xx_hal_def.h" - -/** @addtogroup STM32F0xx_HAL_Driver - * @{ - */ - -/** @addtogroup ADC - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup ADC_Exported_Types ADC Exported Types - * @{ - */ - -/** - * @brief Structure definition of ADC initialization and regular group - * @note The setting of these parameters with function HAL_ADC_Init() is conditioned to ADC state. - * ADC state can be either: - * - For all parameters: ADC disabled (this is the only possible ADC state to modify parameter 'ClockPrescaler') - * - For all parameters except 'ClockPrescaler' and 'resolution': ADC enabled without conversion on going on regular group. - * If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed - * without error reporting (as it can be the expected behaviour in case of intended action to update another parameter (which fulfills the ADC state condition) on the fly). - */ -typedef struct -{ - uint32_t ClockPrescaler; /*!< Select ADC clock source (synchronous clock derived from APB clock or asynchronous clock derived from ADC dedicated HSI RC oscillator 14MHz) and clock prescaler. - This parameter can be a value of @ref ADC_ClockPrescaler - Note: In case of usage of the ADC dedicated HSI RC oscillator, it must be preliminarily enabled at RCC top level. - Note: This parameter can be modified only if the ADC is disabled */ - uint32_t Resolution; /*!< Configures the ADC resolution. - This parameter can be a value of @ref ADC_Resolution */ - uint32_t DataAlign; /*!< Specifies whether the ADC data alignment is left or right. - This parameter can be a value of @ref ADC_Data_align */ - uint32_t ScanConvMode; /*!< Configures the sequencer of regular group. - This parameter can be associated to parameter 'DiscontinuousConvMode' to have main sequence subdivided in successive parts. - Sequencer is automatically enabled if several channels are set (sequencer cannot be disabled, as it can be the case on other STM32 devices): - If only 1 channel is set: Conversion is performed in single mode. - If several channels are set: Conversions are performed in sequence mode (ranks defined by each channel number: channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). - Scan direction can be set to forward (from channel 0 to channel 18) or backward (from channel 18 to channel 0). - This parameter can be a value of @ref ADC_Scan_mode */ - uint32_t EOCSelection; /*!< Specifies what EOC (End Of Conversion) flag is used for conversion by polling and interruption: end of conversion of each rank or complete sequence. - This parameter can be a value of @ref ADC_EOCSelection. */ - FunctionalState LowPowerAutoWait; /*!< Selects the dynamic low power Auto Delay: new conversion start only when the previous - conversion (for regular group) has been treated by user software, using function HAL_ADC_GetValue(). - This feature automatically adapts the ADC conversions trigs to the speed of the system that reads the data. Moreover, this avoids risk of overrun for low frequency applications. - This parameter can be set to ENABLE or DISABLE. - Note: Do not use with interruption or DMA (HAL_ADC_Start_IT(), HAL_ADC_Start_DMA()) since they have to clear immediately the EOC flag to free the IRQ vector sequencer. - Do use with polling: 1. Start conversion with HAL_ADC_Start(), 2. Later on, when conversion data is needed: use HAL_ADC_PollForConversion() to ensure that conversion is completed - and use HAL_ADC_GetValue() to retrieve conversion result and trig another conversion. */ - FunctionalState LowPowerAutoPowerOff; /*!< Selects the auto-off mode: the ADC automatically powers-off after a conversion and automatically wakes-up when a new conversion is triggered (with startup time between trigger and start of sampling). - This feature can be combined with automatic wait mode (parameter 'LowPowerAutoWait'). - This parameter can be set to ENABLE or DISABLE. - Note: If enabled, this feature also turns off the ADC dedicated 14 MHz RC oscillator (HSI14) */ - FunctionalState ContinuousConvMode; /*!< Specifies whether the conversion is performed in single mode (one conversion) or continuous mode for regular group, - after the selected trigger occurred (software start or external trigger). - This parameter can be set to ENABLE or DISABLE. */ - FunctionalState DiscontinuousConvMode; /*!< Specifies whether the conversions sequence of regular group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts). - Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded. - Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded. - This parameter can be set to ENABLE or DISABLE - Note: Number of discontinuous ranks increment is fixed to one-by-one. */ - uint32_t ExternalTrigConv; /*!< Selects the external event used to trigger the conversion start of regular group. - If set to ADC_SOFTWARE_START, external triggers are disabled. - This parameter can be a value of @ref ADC_External_trigger_source_Regular */ - uint32_t ExternalTrigConvEdge; /*!< Selects the external trigger edge of regular group. - If trigger is set to ADC_SOFTWARE_START, this parameter is discarded. - This parameter can be a value of @ref ADC_External_trigger_edge_Regular */ - FunctionalState DMAContinuousRequests; /*!< Specifies whether the DMA requests are performed in one shot mode (DMA transfer stop when number of conversions is reached) - or in Continuous mode (DMA transfer unlimited, whatever number of conversions). - Note: In continuous mode, DMA must be configured in circular mode. Otherwise an overrun will be triggered when DMA buffer maximum pointer is reached. - This parameter can be set to ENABLE or DISABLE. */ - uint32_t Overrun; /*!< Select the behaviour in case of overrun: data preserved or overwritten - This parameter has an effect on regular group only, including in DMA mode. - This parameter can be a value of @ref ADC_Overrun */ - uint32_t SamplingTimeCommon; /*!< Sampling time value to be set for the selected channel. - Unit: ADC clock cycles - Conversion time is the addition of sampling time and processing time (12.5 ADC clock cycles at ADC resolution 12 bits, 10.5 cycles at 10 bits, 8.5 cycles at 8 bits, 6.5 cycles at 6 bits). - Note: On STM32F0 devices, the sampling time setting is common to all channels. On some other STM32 devices, this parameter in channel wise and is located into ADC channel initialization structure. - This parameter can be a value of @ref ADC_sampling_times - Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor), - sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting) - Refer to device datasheet for timings values, parameters TS_vrefint, TS_vbat, TS_temp (values rough order: 5us to 17us). */ -}ADC_InitTypeDef; - -/** - * @brief Structure definition of ADC channel for regular group - * @note The setting of these parameters with function HAL_ADC_ConfigChannel() is conditioned to ADC state. - * ADC state can be either: - * - For all parameters: ADC disabled or enabled without conversion on going on regular group. - * If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed - * without error reporting (as it can be the expected behaviour in case of intended action to update another parameter (which fulfills the ADC state condition) on the fly). - */ -typedef struct -{ - uint32_t Channel; /*!< Specifies the channel to configure into ADC regular group. - This parameter can be a value of @ref ADC_channels - Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability. */ - uint32_t Rank; /*!< Add or remove the channel from ADC regular group sequencer. - On STM32F0 devices, number of ranks in the sequence is defined by number of channels enabled, rank of each channel is defined by channel number (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...).. - Despite the channel rank is fixed, this parameter allow an additional possibility: to remove the selected rank (selected channel) from sequencer. - This parameter can be a value of @ref ADC_rank */ - uint32_t SamplingTime; /*!< Sampling time value to be set for the selected channel. - Unit: ADC clock cycles - Conversion time is the addition of sampling time and processing time (12.5 ADC clock cycles at ADC resolution 12 bits, 10.5 cycles at 10 bits, 8.5 cycles at 8 bits, 6.5 cycles at 6 bits). - This parameter can be a value of @ref ADC_sampling_times - Caution: this setting impacts the entire regular group. Therefore, call of HAL_ADC_ConfigChannel() to configure a channel can impact the configuration of other channels previously set. - Caution: Obsolete parameter. Use parameter "SamplingTimeCommon" in ADC initialization structure. - If parameter "SamplingTimeCommon" is set to a valid sampling time, parameter "SamplingTime" is discarded. - Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor), - sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting) - Refer to device datasheet for timings values, parameters TS_vrefint, TS_vbat, TS_temp (values rough order: 5us to 17us). */ -}ADC_ChannelConfTypeDef; - -/** - * @brief Structure definition of ADC analog watchdog - * @note The setting of these parameters with function HAL_ADC_AnalogWDGConfig() is conditioned to ADC state. - * ADC state can be either: ADC disabled or ADC enabled without conversion on going on regular group. - */ -typedef struct -{ - uint32_t WatchdogMode; /*!< Configures the ADC analog watchdog mode: single/all/none channels. - This parameter can be a value of @ref ADC_analog_watchdog_mode. */ - uint32_t Channel; /*!< Selects which ADC channel to monitor by analog watchdog. - This parameter has an effect only if parameter 'WatchdogMode' is configured on single channel. Only 1 channel can be monitored. - This parameter can be a value of @ref ADC_channels. */ - FunctionalState ITMode; /*!< Specifies whether the analog watchdog is configured in interrupt or polling mode. - This parameter can be set to ENABLE or DISABLE */ - uint32_t HighThreshold; /*!< Configures the ADC analog watchdog High threshold value. - Depending of ADC resolution selected (12, 10, 8 or 6 bits), this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. */ - uint32_t LowThreshold; /*!< Configures the ADC analog watchdog High threshold value. - Depending of ADC resolution selected (12, 10, 8 or 6 bits), this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. */ -}ADC_AnalogWDGConfTypeDef; - -/** - * @brief HAL ADC state machine: ADC states definition (bitfields) - * @note ADC state machine is managed by bitfields, state must be compared - * with bit by bit. - * For example: - * " if (HAL_IS_BIT_SET(HAL_ADC_GetState(hadc1), HAL_ADC_STATE_REG_BUSY)) " - * " if (HAL_IS_BIT_SET(HAL_ADC_GetState(hadc1), HAL_ADC_STATE_AWD1) ) " - */ -/* States of ADC global scope */ -#define HAL_ADC_STATE_RESET (0x00000000U) /*!< ADC not yet initialized or disabled */ -#define HAL_ADC_STATE_READY (0x00000001U) /*!< ADC peripheral ready for use */ -#define HAL_ADC_STATE_BUSY_INTERNAL (0x00000002U) /*!< ADC is busy to internal process (initialization, calibration) */ -#define HAL_ADC_STATE_TIMEOUT (0x00000004U) /*!< TimeOut occurrence */ - -/* States of ADC errors */ -#define HAL_ADC_STATE_ERROR_INTERNAL (0x00000010U) /*!< Internal error occurrence */ -#define HAL_ADC_STATE_ERROR_CONFIG (0x00000020U) /*!< Configuration error occurrence */ -#define HAL_ADC_STATE_ERROR_DMA (0x00000040U) /*!< DMA error occurrence */ - -/* States of ADC group regular */ -#define HAL_ADC_STATE_REG_BUSY (0x00000100U) /*!< A conversion on group regular is ongoing or can occur (either by continuous mode, - external trigger, low power auto power-on, multimode ADC master control) */ -#define HAL_ADC_STATE_REG_EOC (0x00000200U) /*!< Conversion data available on group regular */ -#define HAL_ADC_STATE_REG_OVR (0x00000400U) /*!< Overrun occurrence */ -#define HAL_ADC_STATE_REG_EOSMP (0x00000800U) /*!< Not available on STM32F0 device: End Of Sampling flag raised */ - -/* States of ADC group injected */ -#define HAL_ADC_STATE_INJ_BUSY (0x00001000U) /*!< Not available on STM32F0 device: A conversion on group injected is ongoing or can occur (either by auto-injection mode, - external trigger, low power auto power-on, multimode ADC master control) */ -#define HAL_ADC_STATE_INJ_EOC (0x00002000U) /*!< Not available on STM32F0 device: Conversion data available on group injected */ -#define HAL_ADC_STATE_INJ_JQOVF (0x00004000U) /*!< Not available on STM32F0 device: Not available on STM32F0 device: Injected queue overflow occurrence */ - -/* States of ADC analog watchdogs */ -#define HAL_ADC_STATE_AWD1 (0x00010000U) /*!< Out-of-window occurrence of analog watchdog 1 */ -#define HAL_ADC_STATE_AWD2 (0x00020000U) /*!< Not available on STM32F0 device: Out-of-window occurrence of analog watchdog 2 */ -#define HAL_ADC_STATE_AWD3 (0x00040000U) /*!< Not available on STM32F0 device: Out-of-window occurrence of analog watchdog 3 */ - -/* States of ADC multi-mode */ -#define HAL_ADC_STATE_MULTIMODE_SLAVE (0x00100000U) /*!< Not available on STM32F0 device: ADC in multimode slave state, controlled by another ADC master ( */ - - -/** - * @brief ADC handle Structure definition - */ -typedef struct __ADC_HandleTypeDef -{ - ADC_TypeDef *Instance; /*!< Register base address */ - - ADC_InitTypeDef Init; /*!< ADC required parameters */ - - DMA_HandleTypeDef *DMA_Handle; /*!< Pointer DMA Handler */ - - HAL_LockTypeDef Lock; /*!< ADC locking object */ - - __IO uint32_t State; /*!< ADC communication state (bitmap of ADC states) */ - - __IO uint32_t ErrorCode; /*!< ADC Error code */ - - -#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) - void (* ConvCpltCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC conversion complete callback */ - void (* ConvHalfCpltCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC conversion DMA half-transfer callback */ - void (* LevelOutOfWindowCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC analog watchdog 1 callback */ - void (* ErrorCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC error callback */ - void (* MspInitCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC Msp Init callback */ - void (* MspDeInitCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC Msp DeInit callback */ -#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ -}ADC_HandleTypeDef; - -#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) -/** - * @brief HAL ADC Callback ID enumeration definition - */ -typedef enum -{ - HAL_ADC_CONVERSION_COMPLETE_CB_ID = 0x00U, /*!< ADC conversion complete callback ID */ - HAL_ADC_CONVERSION_HALF_CB_ID = 0x01U, /*!< ADC conversion DMA half-transfer callback ID */ - HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID = 0x02U, /*!< ADC analog watchdog 1 callback ID */ - HAL_ADC_ERROR_CB_ID = 0x03U, /*!< ADC error callback ID */ - HAL_ADC_INJ_CONVERSION_COMPLETE_CB_ID = 0x04U, /*!< ADC group injected conversion complete callback ID */ - HAL_ADC_MSPINIT_CB_ID = 0x09U, /*!< ADC Msp Init callback ID */ - HAL_ADC_MSPDEINIT_CB_ID = 0x0AU /*!< ADC Msp DeInit callback ID */ -} HAL_ADC_CallbackIDTypeDef; - -/** - * @brief HAL ADC Callback pointer definition - */ -typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to a ADC callback function */ - -#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ - -/** - * @} - */ - - - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup ADC_Exported_Constants ADC Exported Constants - * @{ - */ - -/** @defgroup ADC_Error_Code ADC Error Code - * @{ - */ -#define HAL_ADC_ERROR_NONE (0x00U) /*!< No error */ -#define HAL_ADC_ERROR_INTERNAL (0x01U) /*!< ADC IP internal error: if problem of clocking, - enable/disable, erroneous state */ -#define HAL_ADC_ERROR_OVR (0x02U) /*!< Overrun error */ -#define HAL_ADC_ERROR_DMA (0x04U) /*!< DMA transfer error */ - -#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) -#define HAL_ADC_ERROR_INVALID_CALLBACK (0x10U) /*!< Invalid Callback error */ -#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup ADC_ClockPrescaler ADC ClockPrescaler - * @{ - */ -#define ADC_CLOCK_ASYNC_DIV1 (0x00000000U) /*!< ADC asynchronous clock derived from ADC dedicated HSI */ - -#define ADC_CLOCK_SYNC_PCLK_DIV2 ((uint32_t)ADC_CFGR2_CKMODE_0) /*!< ADC synchronous clock derived from AHB clock divided by a prescaler of 2 */ -#define ADC_CLOCK_SYNC_PCLK_DIV4 ((uint32_t)ADC_CFGR2_CKMODE_1) /*!< ADC synchronous clock derived from AHB clock divided by a prescaler of 4 */ - -/** - * @} - */ - -/** @defgroup ADC_Resolution ADC Resolution - * @{ - */ -#define ADC_RESOLUTION_12B (0x00000000U) /*!< ADC 12-bit resolution */ -#define ADC_RESOLUTION_10B ((uint32_t)ADC_CFGR1_RES_0) /*!< ADC 10-bit resolution */ -#define ADC_RESOLUTION_8B ((uint32_t)ADC_CFGR1_RES_1) /*!< ADC 8-bit resolution */ -#define ADC_RESOLUTION_6B ((uint32_t)ADC_CFGR1_RES) /*!< ADC 6-bit resolution */ -/** - * @} - */ - -/** @defgroup ADC_Data_align ADC Data_align - * @{ - */ -#define ADC_DATAALIGN_RIGHT (0x00000000U) -#define ADC_DATAALIGN_LEFT ((uint32_t)ADC_CFGR1_ALIGN) -/** - * @} - */ - -/** @defgroup ADC_Scan_mode ADC Scan mode - * @{ - */ -/* Note: Scan mode values must be compatible with other STM32 devices having */ -/* a configurable sequencer. */ -/* Scan direction setting values are defined by taking in account */ -/* already defined values for other STM32 devices: */ -/* ADC_SCAN_DISABLE (0x00000000U) */ -/* ADC_SCAN_ENABLE (0x00000001U) */ -/* Scan direction forward is considered as default setting equivalent */ -/* to scan enable. */ -/* Scan direction backward is considered as additional setting. */ -/* In case of migration from another STM32 device, the user will be */ -/* warned of change of setting choices with assert check. */ -#define ADC_SCAN_DIRECTION_FORWARD (0x00000001U) /*!< Scan direction forward: from channel 0 to channel 18 */ -#define ADC_SCAN_DIRECTION_BACKWARD (0x00000002U) /*!< Scan direction backward: from channel 18 to channel 0 */ - -#define ADC_SCAN_ENABLE ADC_SCAN_DIRECTION_FORWARD /* For compatibility with other STM32 devices */ - -/** - * @} - */ - -/** @defgroup ADC_External_trigger_edge_Regular ADC External trigger edge Regular - * @{ - */ -#define ADC_EXTERNALTRIGCONVEDGE_NONE (0x00000000U) -#define ADC_EXTERNALTRIGCONVEDGE_RISING ((uint32_t)ADC_CFGR1_EXTEN_0) -#define ADC_EXTERNALTRIGCONVEDGE_FALLING ((uint32_t)ADC_CFGR1_EXTEN_1) -#define ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING ((uint32_t)ADC_CFGR1_EXTEN) -/** - * @} - */ - -/** @defgroup ADC_EOCSelection ADC EOCSelection - * @{ - */ -#define ADC_EOC_SINGLE_CONV ((uint32_t) ADC_ISR_EOC) -#define ADC_EOC_SEQ_CONV ((uint32_t) ADC_ISR_EOS) -/** - * @} - */ - -/** @defgroup ADC_Overrun ADC Overrun - * @{ - */ -#define ADC_OVR_DATA_OVERWRITTEN (0x00000000U) -#define ADC_OVR_DATA_PRESERVED (0x00000001U) -/** - * @} - */ - -/** @defgroup ADC_rank ADC rank - * @{ - */ -#define ADC_RANK_CHANNEL_NUMBER (0x00001000U) /*!< Enable the rank of the selected channels. Number of ranks in the sequence is defined by number of channels enabled, rank of each channel is defined by channel number (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...) */ -#define ADC_RANK_NONE (0x00001001U) /*!< Disable the selected rank (selected channel) from sequencer */ -/** - * @} - */ - -/** @defgroup ADC_sampling_times ADC sampling times - * @{ - */ -/* Note: Parameter "ADC_SAMPLETIME_1CYCLE_5" defined with a dummy bit */ -/* to distinguish this parameter versus reset value 0x00000000, */ -/* in the context of management of parameters "SamplingTimeCommon" */ -/* and "SamplingTime" (obsolete)). */ -#define ADC_SAMPLETIME_1CYCLE_5 (0x10000000U) /*!< Sampling time 1.5 ADC clock cycle */ -#define ADC_SAMPLETIME_7CYCLES_5 ((uint32_t) ADC_SMPR_SMP_0) /*!< Sampling time 7.5 ADC clock cycles */ -#define ADC_SAMPLETIME_13CYCLES_5 ((uint32_t) ADC_SMPR_SMP_1) /*!< Sampling time 13.5 ADC clock cycles */ -#define ADC_SAMPLETIME_28CYCLES_5 ((uint32_t)(ADC_SMPR_SMP_1 | ADC_SMPR_SMP_0)) /*!< Sampling time 28.5 ADC clock cycles */ -#define ADC_SAMPLETIME_41CYCLES_5 ((uint32_t) ADC_SMPR_SMP_2) /*!< Sampling time 41.5 ADC clock cycles */ -#define ADC_SAMPLETIME_55CYCLES_5 ((uint32_t)(ADC_SMPR_SMP_2 | ADC_SMPR_SMP_0)) /*!< Sampling time 55.5 ADC clock cycles */ -#define ADC_SAMPLETIME_71CYCLES_5 ((uint32_t)(ADC_SMPR_SMP_2 | ADC_SMPR_SMP_1)) /*!< Sampling time 71.5 ADC clock cycles */ -#define ADC_SAMPLETIME_239CYCLES_5 ((uint32_t) ADC_SMPR_SMP) /*!< Sampling time 239.5 ADC clock cycles */ -/** - * @} - */ - -/** @defgroup ADC_analog_watchdog_mode ADC analog watchdog mode - * @{ - */ -#define ADC_ANALOGWATCHDOG_NONE ( 0x00000000U) -#define ADC_ANALOGWATCHDOG_SINGLE_REG ((uint32_t)(ADC_CFGR1_AWDSGL | ADC_CFGR1_AWDEN)) -#define ADC_ANALOGWATCHDOG_ALL_REG ((uint32_t) ADC_CFGR1_AWDEN) -/** - * @} - */ - -/** @defgroup ADC_Event_type ADC Event type - * @{ - */ -#define ADC_AWD_EVENT ((uint32_t)ADC_FLAG_AWD) /*!< ADC Analog watchdog 1 event */ -#define ADC_OVR_EVENT ((uint32_t)ADC_FLAG_OVR) /*!< ADC overrun event */ -/** - * @} - */ - -/** @defgroup ADC_interrupts_definition ADC interrupts definition - * @{ - */ -#define ADC_IT_AWD ADC_IER_AWDIE /*!< ADC Analog watchdog interrupt source */ -#define ADC_IT_OVR ADC_IER_OVRIE /*!< ADC overrun interrupt source */ -#define ADC_IT_EOS ADC_IER_EOSEQIE /*!< ADC End of Regular sequence of Conversions interrupt source */ -#define ADC_IT_EOC ADC_IER_EOCIE /*!< ADC End of Regular Conversion interrupt source */ -#define ADC_IT_EOSMP ADC_IER_EOSMPIE /*!< ADC End of Sampling interrupt source */ -#define ADC_IT_RDY ADC_IER_ADRDYIE /*!< ADC Ready interrupt source */ -/** - * @} - */ - -/** @defgroup ADC_flags_definition ADC flags definition - * @{ - */ -#define ADC_FLAG_AWD ADC_ISR_AWD /*!< ADC Analog watchdog flag */ -#define ADC_FLAG_OVR ADC_ISR_OVR /*!< ADC overrun flag */ -#define ADC_FLAG_EOS ADC_ISR_EOSEQ /*!< ADC End of Regular sequence of Conversions flag */ -#define ADC_FLAG_EOC ADC_ISR_EOC /*!< ADC End of Regular Conversion flag */ -#define ADC_FLAG_EOSMP ADC_ISR_EOSMP /*!< ADC End of Sampling flag */ -#define ADC_FLAG_RDY ADC_ISR_ADRDY /*!< ADC Ready flag */ -/** - * @} - */ - -/** - * @} - */ - - -/* Private constants ---------------------------------------------------------*/ - -/** @addtogroup ADC_Private_Constants ADC Private Constants - * @{ - */ - -/** @defgroup ADC_Internal_HAL_driver_Ext_trig_src_Regular ADC Internal HAL driver Ext trig src Regular - * @{ - */ - -/* List of external triggers of regular group for ADC1: */ -/* (used internally by HAL driver. To not use into HAL structure parameters) */ -#define ADC1_2_EXTERNALTRIG_T1_TRGO (0x00000000U) -#define ADC1_2_EXTERNALTRIG_T1_CC4 ((uint32_t)ADC_CFGR1_EXTSEL_0) -#define ADC1_2_EXTERNALTRIG_T2_TRGO ((uint32_t)ADC_CFGR1_EXTSEL_1) -#define ADC1_2_EXTERNALTRIG_T3_TRGO ((uint32_t)(ADC_CFGR1_EXTSEL_1 | ADC_CFGR1_EXTSEL_0)) -#define ADC1_2_EXTERNALTRIG_T15_TRGO ((uint32_t)ADC_CFGR1_EXTSEL_2) -/** - * @} - */ - -/* Combination of all post-conversion flags bits: EOC/EOS, OVR, AWD */ -#define ADC_FLAG_POSTCONV_ALL (ADC_FLAG_AWD | ADC_FLAG_OVR | ADC_FLAG_EOS | ADC_FLAG_EOC) - -/** - * @} - */ - - -/* Exported macro ------------------------------------------------------------*/ - -/** @defgroup ADC_Exported_Macros ADC Exported Macros - * @{ - */ -/* Macro for internal HAL driver usage, and possibly can be used into code of */ -/* final user. */ - -/** - * @brief Enable the ADC peripheral - * @param __HANDLE__ ADC handle - * @retval None - */ -#define __HAL_ADC_ENABLE(__HANDLE__) \ - ((__HANDLE__)->Instance->CR |= ADC_CR_ADEN) - -/** - * @brief Disable the ADC peripheral - * @param __HANDLE__ ADC handle - * @retval None - */ -#define __HAL_ADC_DISABLE(__HANDLE__) \ - do{ \ - (__HANDLE__)->Instance->CR |= ADC_CR_ADDIS; \ - __HAL_ADC_CLEAR_FLAG((__HANDLE__), (ADC_FLAG_EOSMP | ADC_FLAG_RDY)); \ - } while(0) - -/** - * @brief Enable the ADC end of conversion interrupt. - * @param __HANDLE__ ADC handle - * @param __INTERRUPT__ ADC Interrupt - * This parameter can be any combination of the following values: - * @arg ADC_IT_EOC: ADC End of Regular Conversion interrupt source - * @arg ADC_IT_EOS: ADC End of Regular sequence of Conversions interrupt source - * @arg ADC_IT_AWD: ADC Analog watchdog interrupt source - * @arg ADC_IT_OVR: ADC overrun interrupt source - * @arg ADC_IT_EOSMP: ADC End of Sampling interrupt source - * @arg ADC_IT_RDY: ADC Ready interrupt source - * @retval None - */ -#define __HAL_ADC_ENABLE_IT(__HANDLE__, __INTERRUPT__) \ - (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__)) - -/** - * @brief Disable the ADC end of conversion interrupt. - * @param __HANDLE__ ADC handle - * @param __INTERRUPT__ ADC Interrupt - * This parameter can be any combination of the following values: - * @arg ADC_IT_EOC: ADC End of Regular Conversion interrupt source - * @arg ADC_IT_EOS: ADC End of Regular sequence of Conversions interrupt source - * @arg ADC_IT_AWD: ADC Analog watchdog interrupt source - * @arg ADC_IT_OVR: ADC overrun interrupt source - * @arg ADC_IT_EOSMP: ADC End of Sampling interrupt source - * @arg ADC_IT_RDY: ADC Ready interrupt source - * @retval None - */ -#define __HAL_ADC_DISABLE_IT(__HANDLE__, __INTERRUPT__) \ - (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__)) - -/** @brief Checks if the specified ADC interrupt source is enabled or disabled. - * @param __HANDLE__ ADC handle - * @param __INTERRUPT__ ADC interrupt source to check - * This parameter can be any combination of the following values: - * @arg ADC_IT_EOC: ADC End of Regular Conversion interrupt source - * @arg ADC_IT_EOS: ADC End of Regular sequence of Conversions interrupt source - * @arg ADC_IT_AWD: ADC Analog watchdog interrupt source - * @arg ADC_IT_OVR: ADC overrun interrupt source - * @arg ADC_IT_EOSMP: ADC End of Sampling interrupt source - * @arg ADC_IT_RDY: ADC Ready interrupt source - * @retval State ofinterruption (SET or RESET) - */ -#define __HAL_ADC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \ - (((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) - -/** - * @brief Get the selected ADC's flag status. - * @param __HANDLE__ ADC handle - * @param __FLAG__ ADC flag - * This parameter can be any combination of the following values: - * @arg ADC_FLAG_EOC: ADC End of Regular conversion flag - * @arg ADC_FLAG_EOS: ADC End of Regular sequence of Conversions flag - * @arg ADC_FLAG_AWD: ADC Analog watchdog flag - * @arg ADC_FLAG_OVR: ADC overrun flag - * @arg ADC_FLAG_EOSMP: ADC End of Sampling flag - * @arg ADC_FLAG_RDY: ADC Ready flag - * @retval None - */ -#define __HAL_ADC_GET_FLAG(__HANDLE__, __FLAG__) \ - ((((__HANDLE__)->Instance->ISR) & (__FLAG__)) == (__FLAG__)) - -/** - * @brief Clear the ADC's pending flags - * @param __HANDLE__ ADC handle - * @param __FLAG__ ADC flag - * This parameter can be any combination of the following values: - * @arg ADC_FLAG_EOC: ADC End of Regular conversion flag - * @arg ADC_FLAG_EOS: ADC End of Regular sequence of Conversions flag - * @arg ADC_FLAG_AWD: ADC Analog watchdog flag - * @arg ADC_FLAG_OVR: ADC overrun flag - * @arg ADC_FLAG_EOSMP: ADC End of Sampling flag - * @arg ADC_FLAG_RDY: ADC Ready flag - * @retval None - */ -/* Note: bit cleared bit by writing 1 (writing 0 has no effect on any bit of register ISR) */ -#define __HAL_ADC_CLEAR_FLAG(__HANDLE__, __FLAG__) \ - (((__HANDLE__)->Instance->ISR) = (__FLAG__)) - -/** @brief Reset ADC handle state - * @param __HANDLE__ ADC handle - * @retval None - */ -#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) -#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) \ - do{ \ - (__HANDLE__)->State = HAL_ADC_STATE_RESET; \ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - } while(0) -#else -#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) \ - ((__HANDLE__)->State = HAL_ADC_STATE_RESET) -#endif - -/** - * @} - */ - - -/* Private macro -------------------------------------------------------------*/ - -/** @defgroup ADC_Private_Macros ADC Private Macros - * @{ - */ -/* Macro reserved for internal HAL driver usage, not intended to be used in */ -/* code of final user. */ - - -/** - * @brief Verification of hardware constraints before ADC can be enabled - * @param __HANDLE__ ADC handle - * @retval SET (ADC can be enabled) or RESET (ADC cannot be enabled) - */ -#define ADC_ENABLING_CONDITIONS(__HANDLE__) \ - (( ( ((__HANDLE__)->Instance->CR) & \ - (ADC_CR_ADCAL | ADC_CR_ADSTP | ADC_CR_ADSTART | ADC_CR_ADDIS | ADC_CR_ADEN) \ - ) == RESET \ - ) ? SET : RESET) - -/** - * @brief Verification of hardware constraints before ADC can be disabled - * @param __HANDLE__ ADC handle - * @retval SET (ADC can be disabled) or RESET (ADC cannot be disabled) - */ -#define ADC_DISABLING_CONDITIONS(__HANDLE__) \ - (( ( ((__HANDLE__)->Instance->CR) & \ - (ADC_CR_ADSTART | ADC_CR_ADEN)) == ADC_CR_ADEN \ - ) ? SET : RESET) - -/** - * @brief Verification of ADC state: enabled or disabled - * @param __HANDLE__ ADC handle - * @retval SET (ADC enabled) or RESET (ADC disabled) - */ -/* Note: If low power mode AutoPowerOff is enabled, power-on/off phases are */ -/* performed automatically by hardware and flag ADC_FLAG_RDY is not */ -/* set. */ -#define ADC_IS_ENABLE(__HANDLE__) \ - (( ((((__HANDLE__)->Instance->CR) & (ADC_CR_ADEN | ADC_CR_ADDIS)) == ADC_CR_ADEN) && \ - (((((__HANDLE__)->Instance->ISR) & ADC_FLAG_RDY) == ADC_FLAG_RDY) || \ - ((((__HANDLE__)->Instance->CFGR1) & ADC_CFGR1_AUTOFF) == ADC_CFGR1_AUTOFF) ) \ - ) ? SET : RESET) - -/** - * @brief Test if conversion trigger of regular group is software start - * or external trigger. - * @param __HANDLE__ ADC handle - * @retval SET (software start) or RESET (external trigger) - */ -#define ADC_IS_SOFTWARE_START_REGULAR(__HANDLE__) \ - (((__HANDLE__)->Instance->CFGR1 & ADC_CFGR1_EXTEN) == RESET) - -/** - * @brief Check if no conversion on going on regular group - * @param __HANDLE__ ADC handle - * @retval SET (conversion is on going) or RESET (no conversion is on going) - */ -#define ADC_IS_CONVERSION_ONGOING_REGULAR(__HANDLE__) \ - (( (((__HANDLE__)->Instance->CR) & ADC_CR_ADSTART) == RESET \ - ) ? RESET : SET) - -/** - * @brief Returns resolution bits in CFGR1 register: RES[1:0]. - * Returned value is among parameters to @ref ADC_Resolution. - * @param __HANDLE__ ADC handle - * @retval None - */ -#define ADC_GET_RESOLUTION(__HANDLE__) \ - (((__HANDLE__)->Instance->CFGR1) & ADC_CFGR1_RES) - -/** - * @brief Returns ADC sample time bits in SMPR register: SMP[2:0]. - * Returned value is among parameters to @ref ADC_Resolution. - * @param __HANDLE__ ADC handle - * @retval None - */ -#define ADC_GET_SAMPLINGTIME(__HANDLE__) \ - (((__HANDLE__)->Instance->SMPR) & ADC_SMPR_SMP) - -/** - * @brief Simultaneously clears and sets specific bits of the handle State - * @note: ADC_STATE_CLR_SET() macro is merely aliased to generic macro MODIFY_REG(), - * the first parameter is the ADC handle State, the second parameter is the - * bit field to clear, the third and last parameter is the bit field to set. - * @retval None - */ -#define ADC_STATE_CLR_SET MODIFY_REG - -/** - * @brief Clear ADC error code (set it to error code: "no error") - * @param __HANDLE__ ADC handle - * @retval None - */ -#define ADC_CLEAR_ERRORCODE(__HANDLE__) \ - ((__HANDLE__)->ErrorCode = HAL_ADC_ERROR_NONE) - - -/** - * @brief Configure the channel number into channel selection register - * @param _CHANNEL_ ADC Channel - * @retval None - */ -/* This function converts ADC channels from numbers (see defgroup ADC_channels) - to bitfields, to get the equivalence of CMSIS channels: - ADC_CHANNEL_0 ((uint32_t) ADC_CHSELR_CHSEL0) - ADC_CHANNEL_1 ((uint32_t) ADC_CHSELR_CHSEL1) - ADC_CHANNEL_2 ((uint32_t) ADC_CHSELR_CHSEL2) - ADC_CHANNEL_3 ((uint32_t) ADC_CHSELR_CHSEL3) - ADC_CHANNEL_4 ((uint32_t) ADC_CHSELR_CHSEL4) - ADC_CHANNEL_5 ((uint32_t) ADC_CHSELR_CHSEL5) - ADC_CHANNEL_6 ((uint32_t) ADC_CHSELR_CHSEL6) - ADC_CHANNEL_7 ((uint32_t) ADC_CHSELR_CHSEL7) - ADC_CHANNEL_8 ((uint32_t) ADC_CHSELR_CHSEL8) - ADC_CHANNEL_9 ((uint32_t) ADC_CHSELR_CHSEL9) - ADC_CHANNEL_10 ((uint32_t) ADC_CHSELR_CHSEL10) - ADC_CHANNEL_11 ((uint32_t) ADC_CHSELR_CHSEL11) - ADC_CHANNEL_12 ((uint32_t) ADC_CHSELR_CHSEL12) - ADC_CHANNEL_13 ((uint32_t) ADC_CHSELR_CHSEL13) - ADC_CHANNEL_14 ((uint32_t) ADC_CHSELR_CHSEL14) - ADC_CHANNEL_15 ((uint32_t) ADC_CHSELR_CHSEL15) - ADC_CHANNEL_16 ((uint32_t) ADC_CHSELR_CHSEL16) - ADC_CHANNEL_17 ((uint32_t) ADC_CHSELR_CHSEL17) - ADC_CHANNEL_18 ((uint32_t) ADC_CHSELR_CHSEL18) -*/ -#define ADC_CHSELR_CHANNEL(_CHANNEL_) \ - ( 1U << (_CHANNEL_)) - -/** - * @brief Set the ADC's sample time - * @param _SAMPLETIME_ Sample time parameter. - * @retval None - */ -/* Note: ADC sampling time set using mask ADC_SMPR_SMP due to parameter */ -/* "ADC_SAMPLETIME_1CYCLE_5" defined with a dummy bit (bit used to */ -/* distinguish this parameter versus reset value 0x00000000, */ -/* in the context of management of parameters "SamplingTimeCommon" */ -/* and "SamplingTime" (obsolete)). */ -#define ADC_SMPR_SET(_SAMPLETIME_) \ - ((_SAMPLETIME_) & (ADC_SMPR_SMP)) - -/** - * @brief Set the Analog Watchdog 1 channel. - * @param _CHANNEL_ channel to be monitored by Analog Watchdog 1. - * @retval None - */ -#define ADC_CFGR_AWDCH(_CHANNEL_) \ - ((_CHANNEL_) << 26U) - -/** - * @brief Enable ADC discontinuous conversion mode for regular group - * @param _REG_DISCONTINUOUS_MODE_ Regular discontinuous mode. - * @retval None - */ -#define ADC_CFGR1_REG_DISCCONTINUOUS(_REG_DISCONTINUOUS_MODE_) \ - ((_REG_DISCONTINUOUS_MODE_) << 16U) - -/** - * @brief Enable the ADC auto off mode. - * @param _AUTOOFF_ Auto off bit enable or disable. - * @retval None - */ -#define ADC_CFGR1_AUTOOFF(_AUTOOFF_) \ - ((_AUTOOFF_) << 15U) - -/** - * @brief Enable the ADC auto delay mode. - * @param _AUTOWAIT_ Auto delay bit enable or disable. - * @retval None - */ -#define ADC_CFGR1_AUTOWAIT(_AUTOWAIT_) \ - ((_AUTOWAIT_) << 14U) - -/** - * @brief Enable ADC continuous conversion mode. - * @param _CONTINUOUS_MODE_ Continuous mode. - * @retval None - */ -#define ADC_CFGR1_CONTINUOUS(_CONTINUOUS_MODE_) \ - ((_CONTINUOUS_MODE_) << 13U) - -/** - * @brief Enable ADC overrun mode. - * @param _OVERRUN_MODE_ Overrun mode. - * @retval Overun bit setting to be programmed into CFGR register - */ -/* Note: Bit ADC_CFGR1_OVRMOD not used directly in constant */ -/* "ADC_OVR_DATA_OVERWRITTEN" to have this case defined to 0x00, to set it */ -/* as the default case to be compliant with other STM32 devices. */ -#define ADC_CFGR1_OVERRUN(_OVERRUN_MODE_) \ - ( ( (_OVERRUN_MODE_) != (ADC_OVR_DATA_PRESERVED) \ - )? (ADC_CFGR1_OVRMOD) : (0x00000000) \ - ) - -/** - * @brief Enable ADC scan mode to convert multiple ranks with sequencer. - * @param _SCAN_MODE_ Scan conversion mode. - * @retval None - */ -/* Note: Scan mode set using this macro (instead of parameter direct set) */ -/* due to different modes on other STM32 devices: to avoid any */ -/* unwanted setting, the exact parameter corresponding to the device */ -/* must be passed to this macro. */ -#define ADC_SCANDIR(_SCAN_MODE_) \ - ( ( (_SCAN_MODE_) == (ADC_SCAN_DIRECTION_BACKWARD) \ - )? (ADC_CFGR1_SCANDIR) : (0x00000000) \ - ) - -/** - * @brief Enable the ADC DMA continuous request. - * @param _DMACONTREQ_MODE_ DMA continuous request mode. - * @retval None - */ -#define ADC_CFGR1_DMACONTREQ(_DMACONTREQ_MODE_) \ - ((_DMACONTREQ_MODE_) << 1U) - -/** - * @brief Configure the analog watchdog high threshold into register TR. - * @param _Threshold_ Threshold value - * @retval None - */ -#define ADC_TRX_HIGHTHRESHOLD(_Threshold_) \ - ((_Threshold_) << 16U) - -/** - * @brief Shift the AWD threshold in function of the selected ADC resolution. - * Thresholds have to be left-aligned on bit 11, the LSB (right bits) are set to 0. - * If resolution 12 bits, no shift. - * If resolution 10 bits, shift of 2 ranks on the left. - * If resolution 8 bits, shift of 4 ranks on the left. - * If resolution 6 bits, shift of 6 ranks on the left. - * therefore, shift = (12 - resolution) = 12 - (12- (((RES[1:0]) >> 3)*2)) - * @param __HANDLE__ ADC handle - * @param _Threshold_ Value to be shifted - * @retval None - */ -#define ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(__HANDLE__, _Threshold_) \ - ((_Threshold_) << ((((__HANDLE__)->Instance->CFGR1 & ADC_CFGR1_RES) >> 3U)*2)) - - -#define IS_ADC_CLOCKPRESCALER(ADC_CLOCK) (((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV1) || \ - ((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV2) || \ - ((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV4) ) - -#define IS_ADC_RESOLUTION(RESOLUTION) (((RESOLUTION) == ADC_RESOLUTION_12B) || \ - ((RESOLUTION) == ADC_RESOLUTION_10B) || \ - ((RESOLUTION) == ADC_RESOLUTION_8B) || \ - ((RESOLUTION) == ADC_RESOLUTION_6B) ) - -#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DATAALIGN_RIGHT) || \ - ((ALIGN) == ADC_DATAALIGN_LEFT) ) - -#define IS_ADC_SCAN_MODE(SCAN_MODE) (((SCAN_MODE) == ADC_SCAN_DIRECTION_FORWARD) || \ - ((SCAN_MODE) == ADC_SCAN_DIRECTION_BACKWARD) ) - -#define IS_ADC_EXTTRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGCONVEDGE_NONE) || \ - ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISING) || \ - ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_FALLING) || \ - ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING) ) - -#define IS_ADC_EOC_SELECTION(EOC_SELECTION) (((EOC_SELECTION) == ADC_EOC_SINGLE_CONV) || \ - ((EOC_SELECTION) == ADC_EOC_SEQ_CONV) ) - -#define IS_ADC_OVERRUN(OVR) (((OVR) == ADC_OVR_DATA_PRESERVED) || \ - ((OVR) == ADC_OVR_DATA_OVERWRITTEN) ) - -#define IS_ADC_RANK(WATCHDOG) (((WATCHDOG) == ADC_RANK_CHANNEL_NUMBER) || \ - ((WATCHDOG) == ADC_RANK_NONE) ) - -#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SAMPLETIME_1CYCLE_5) || \ - ((TIME) == ADC_SAMPLETIME_7CYCLES_5) || \ - ((TIME) == ADC_SAMPLETIME_13CYCLES_5) || \ - ((TIME) == ADC_SAMPLETIME_28CYCLES_5) || \ - ((TIME) == ADC_SAMPLETIME_41CYCLES_5) || \ - ((TIME) == ADC_SAMPLETIME_55CYCLES_5) || \ - ((TIME) == ADC_SAMPLETIME_71CYCLES_5) || \ - ((TIME) == ADC_SAMPLETIME_239CYCLES_5) ) - -#define IS_ADC_ANALOG_WATCHDOG_MODE(WATCHDOG) (((WATCHDOG) == ADC_ANALOGWATCHDOG_NONE) || \ - ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REG) || \ - ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REG) ) - -#define IS_ADC_EVENT_TYPE(EVENT) (((EVENT) == ADC_AWD_EVENT) || \ - ((EVENT) == ADC_OVR_EVENT) ) - -/** @defgroup ADC_range_verification ADC range verification - * in function of ADC resolution selected (12, 10, 8 or 6 bits) - * @{ - */ -#define IS_ADC_RANGE(RESOLUTION, ADC_VALUE) \ - ((((RESOLUTION) == ADC_RESOLUTION_12B) && ((ADC_VALUE) <= (0x0FFFU))) || \ - (((RESOLUTION) == ADC_RESOLUTION_10B) && ((ADC_VALUE) <= (0x03FFU))) || \ - (((RESOLUTION) == ADC_RESOLUTION_8B) && ((ADC_VALUE) <= (0x00FFU))) || \ - (((RESOLUTION) == ADC_RESOLUTION_6B) && ((ADC_VALUE) <= (0x003FU))) ) -/** - * @} - */ - -/** @defgroup ADC_regular_rank_verification ADC regular rank verification - * @{ - */ -#define IS_ADC_REGULAR_RANK(RANK) (((RANK) >= (1U)) && ((RANK) <= (16U))) -/** - * @} - */ - -/** - * @} - */ - -/* Include ADC HAL Extension module */ -#include "stm32f0xx_hal_adc_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup ADC_Exported_Functions - * @{ - */ - -/** @addtogroup ADC_Exported_Functions_Group1 - * @{ - */ - - -/* Initialization and de-initialization functions **********************************/ -HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc); -HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc); -void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc); -void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc); - -#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) -/* Callbacks Register/UnRegister functions ***********************************/ -HAL_StatusTypeDef HAL_ADC_RegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID, pADC_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_ADC_UnRegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID); -#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/* IO operation functions *****************************************************/ - -/** @addtogroup ADC_Exported_Functions_Group2 - * @{ - */ - - -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc); -HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef* hadc); -HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout); -HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventType, uint32_t Timeout); - -/* Non-blocking mode: Interruption */ -HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc); -HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef* hadc); - -/* Non-blocking mode: DMA */ -HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length); -HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc); - -/* ADC retrieve conversion value intended to be used with polling or interruption */ -uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef* hadc); - -/* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption and DMA) */ -void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc); -void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc); -void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc); -void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc); -void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc); -/** - * @} - */ - - -/* Peripheral Control functions ***********************************************/ -/** @addtogroup ADC_Exported_Functions_Group3 - * @{ - */ -HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConfTypeDef* sConfig); -HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDGConfTypeDef* AnalogWDGConfig); -/** - * @} - */ - - -/* Peripheral State functions *************************************************/ -/** @addtogroup ADC_Exported_Functions_Group4 - * @{ - */ -uint32_t HAL_ADC_GetState(ADC_HandleTypeDef* hadc); -uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc); -/** - * @} - */ - - -/** - * @} - */ - - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* STM32F0xx_HAL_ADC_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - -- cgit