From 94f94260ace13688285fc8c62687079b26c18854 Mon Sep 17 00:00:00 2001 From: jaseg Date: Sun, 20 Dec 2020 15:18:02 +0100 Subject: Submodule-cache WIP --- .../Source/Templates/gcc/startup_stm32f030x6.s | 258 ----------------- .../Source/Templates/gcc/startup_stm32f030x8.s | 273 ------------------ .../Source/Templates/gcc/startup_stm32f030xc.s | 278 ------------------ .../Source/Templates/gcc/startup_stm32f031x6.s | 264 ------------------ .../Source/Templates/gcc/startup_stm32f038xx.s | 261 ----------------- .../Source/Templates/gcc/startup_stm32f042x6.s | 309 --------------------- .../Source/Templates/gcc/startup_stm32f048xx.s | 279 ------------------- .../Source/Templates/gcc/startup_stm32f051x8.s | 285 ------------------- .../Source/Templates/gcc/startup_stm32f058xx.s | 282 ------------------- .../Source/Templates/gcc/startup_stm32f070x6.s | 294 -------------------- .../Source/Templates/gcc/startup_stm32f070xb.s | 282 ------------------- .../Source/Templates/gcc/startup_stm32f071xb.s | 291 ------------------- .../Source/Templates/gcc/startup_stm32f072xb.s | 294 -------------------- .../Source/Templates/gcc/startup_stm32f078xx.s | 294 -------------------- .../Source/Templates/gcc/startup_stm32f091xc.s | 290 ------------------- .../Source/Templates/gcc/startup_stm32f098xx.s | 290 ------------------- 16 files changed, 4524 deletions(-) delete mode 100644 fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030x6.s delete mode 100644 fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030x8.s delete mode 100644 fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030xc.s delete mode 100644 fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f031x6.s delete mode 100644 fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f038xx.s delete mode 100644 fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f042x6.s delete mode 100644 fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f048xx.s delete mode 100644 fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f051x8.s delete mode 100644 fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f058xx.s delete mode 100644 fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f070x6.s delete mode 100644 fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f070xb.s delete mode 100644 fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f071xb.s delete mode 100644 fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f072xb.s delete mode 100644 fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f078xx.s delete mode 100644 fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f091xc.s delete mode 100644 fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f098xx.s (limited to 'fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc') diff --git a/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030x6.s b/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030x6.s deleted file mode 100644 index 727c24d..0000000 --- a/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030x6.s +++ /dev/null @@ -1,258 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32f030x6.s - * @author MCD Application Team - * @brief STM32F030x4/STM32F030x6 devices vector table for GCC toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M0 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - - .syntax unified - .cpu cortex-m0 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - ldr r0, =_estack - mov sp, r0 /* set stack pointer */ - -/* Copy the data segment initializers from flash to SRAM */ - ldr r0, =_sdata - ldr r1, =_edata - ldr r2, =_sidata - movs r3, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r4, [r2, r3] - str r4, [r0, r3] - adds r3, r3, #4 - -LoopCopyDataInit: - adds r4, r0, r3 - cmp r4, r1 - bcc CopyDataInit - -/* Zero fill the bss segment. */ - ldr r2, =_sbss - ldr r4, =_ebss - movs r3, #0 - b LoopFillZerobss - -FillZerobss: - str r3, [r2] - adds r2, r2, #4 - -LoopFillZerobss: - cmp r2, r4 - bcc FillZerobss - -/* Call the clock system intitialization function.*/ - bl SystemInit -/* Call static constructors */ - bl __libc_init_array -/* Call the application's entry point.*/ - bl main - -LoopForever: - b LoopForever - - -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * - * @param None - * @retval : None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M0. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word 0 - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler /* Window WatchDog */ - .word 0 /* Reserved */ - .word RTC_IRQHandler /* RTC through the EXTI line */ - .word FLASH_IRQHandler /* FLASH */ - .word RCC_IRQHandler /* RCC */ - .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */ - .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */ - .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */ - .word 0 /* Reserved */ - .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */ - .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */ - .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */ - .word ADC1_IRQHandler /* ADC1 */ - .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */ - .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ - .word 0 /* Reserved */ - .word TIM3_IRQHandler /* TIM3 */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - .word TIM14_IRQHandler /* TIM14 */ - .word 0 /* Reserved */ - .word TIM16_IRQHandler /* TIM16 */ - .word TIM17_IRQHandler /* TIM17 */ - .word I2C1_IRQHandler /* I2C1 */ - .word 0 /* Reserved */ - .word SPI1_IRQHandler /* SPI1 */ - .word 0 /* Reserved */ - .word USART1_IRQHandler /* USART1 */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_IRQHandler - .thumb_set RCC_IRQHandler,Default_Handler - - .weak EXTI0_1_IRQHandler - .thumb_set EXTI0_1_IRQHandler,Default_Handler - - .weak EXTI2_3_IRQHandler - .thumb_set EXTI2_3_IRQHandler,Default_Handler - - .weak EXTI4_15_IRQHandler - .thumb_set EXTI4_15_IRQHandler,Default_Handler - - .weak DMA1_Channel1_IRQHandler - .thumb_set DMA1_Channel1_IRQHandler,Default_Handler - - .weak DMA1_Channel2_3_IRQHandler - .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler - - .weak DMA1_Channel4_5_IRQHandler - .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler - - .weak ADC1_IRQHandler - .thumb_set ADC1_IRQHandler,Default_Handler - - .weak TIM1_BRK_UP_TRG_COM_IRQHandler - .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak TIM14_IRQHandler - .thumb_set TIM14_IRQHandler,Default_Handler - - .weak TIM16_IRQHandler - .thumb_set TIM16_IRQHandler,Default_Handler - - .weak TIM17_IRQHandler - .thumb_set TIM17_IRQHandler,Default_Handler - - .weak I2C1_IRQHandler - .thumb_set I2C1_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030x8.s b/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030x8.s deleted file mode 100644 index ff3496e..0000000 --- a/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030x8.s +++ /dev/null @@ -1,273 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32f030x8.s - * @author MCD Application Team - * @brief STM32F030x8 devices vector table for GCC toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M0 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - - .syntax unified - .cpu cortex-m0 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - ldr r0, =_estack - mov sp, r0 /* set stack pointer */ - -/* Copy the data segment initializers from flash to SRAM */ - ldr r0, =_sdata - ldr r1, =_edata - ldr r2, =_sidata - movs r3, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r4, [r2, r3] - str r4, [r0, r3] - adds r3, r3, #4 - -LoopCopyDataInit: - adds r4, r0, r3 - cmp r4, r1 - bcc CopyDataInit - -/* Zero fill the bss segment. */ - ldr r2, =_sbss - ldr r4, =_ebss - movs r3, #0 - b LoopFillZerobss - -FillZerobss: - str r3, [r2] - adds r2, r2, #4 - -LoopFillZerobss: - cmp r2, r4 - bcc FillZerobss - -/* Call the clock system intitialization function.*/ - bl SystemInit -/* Call static constructors */ - bl __libc_init_array -/* Call the application's entry point.*/ - bl main - -LoopForever: - b LoopForever - - -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * - * @param None - * @retval : None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M0. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word 0 - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler /* Window WatchDog */ - .word 0 /* Reserved */ - .word RTC_IRQHandler /* RTC through the EXTI line */ - .word FLASH_IRQHandler /* FLASH */ - .word RCC_IRQHandler /* RCC */ - .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */ - .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */ - .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */ - .word 0 /* Reserved */ - .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */ - .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */ - .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */ - .word ADC1_IRQHandler /* ADC1 */ - .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */ - .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ - .word 0 /* Reserved */ - .word TIM3_IRQHandler /* TIM3 */ - .word TIM6_IRQHandler /* TIM6 */ - .word 0 /* Reserved */ - .word TIM14_IRQHandler /* TIM14 */ - .word TIM15_IRQHandler /* TIM15 */ - .word TIM16_IRQHandler /* TIM16 */ - .word TIM17_IRQHandler /* TIM17 */ - .word I2C1_IRQHandler /* I2C1 */ - .word I2C2_IRQHandler /* I2C2 */ - .word SPI1_IRQHandler /* SPI1 */ - .word SPI2_IRQHandler /* SPI2 */ - .word USART1_IRQHandler /* USART1 */ - .word USART2_IRQHandler /* USART2 */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_IRQHandler - .thumb_set RCC_IRQHandler,Default_Handler - - .weak EXTI0_1_IRQHandler - .thumb_set EXTI0_1_IRQHandler,Default_Handler - - .weak EXTI2_3_IRQHandler - .thumb_set EXTI2_3_IRQHandler,Default_Handler - - .weak EXTI4_15_IRQHandler - .thumb_set EXTI4_15_IRQHandler,Default_Handler - - .weak DMA1_Channel1_IRQHandler - .thumb_set DMA1_Channel1_IRQHandler,Default_Handler - - .weak DMA1_Channel2_3_IRQHandler - .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler - - .weak DMA1_Channel4_5_IRQHandler - .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler - - .weak ADC1_IRQHandler - .thumb_set ADC1_IRQHandler,Default_Handler - - .weak TIM1_BRK_UP_TRG_COM_IRQHandler - .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak TIM6_IRQHandler - .thumb_set TIM6_IRQHandler,Default_Handler - - .weak TIM14_IRQHandler - .thumb_set TIM14_IRQHandler,Default_Handler - - .weak TIM15_IRQHandler - .thumb_set TIM15_IRQHandler,Default_Handler - - .weak TIM16_IRQHandler - .thumb_set TIM16_IRQHandler,Default_Handler - - .weak TIM17_IRQHandler - .thumb_set TIM17_IRQHandler,Default_Handler - - .weak I2C1_IRQHandler - .thumb_set I2C1_IRQHandler,Default_Handler - - .weak I2C2_IRQHandler - .thumb_set I2C2_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak SPI2_IRQHandler - .thumb_set SPI2_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030xc.s b/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030xc.s deleted file mode 100644 index 43b492d..0000000 --- a/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030xc.s +++ /dev/null @@ -1,278 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32f030xc.s - * @author MCD Application Team - * @brief STM32F030xc/STM32F030xb devices vector table for GCC toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M0 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - - .syntax unified - .cpu cortex-m0 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - ldr r0, =_estack - mov sp, r0 /* set stack pointer */ - -/* Copy the data segment initializers from flash to SRAM */ - ldr r0, =_sdata - ldr r1, =_edata - ldr r2, =_sidata - movs r3, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r4, [r2, r3] - str r4, [r0, r3] - adds r3, r3, #4 - -LoopCopyDataInit: - adds r4, r0, r3 - cmp r4, r1 - bcc CopyDataInit - -/* Zero fill the bss segment. */ - ldr r2, =_sbss - ldr r4, =_ebss - movs r3, #0 - b LoopFillZerobss - -FillZerobss: - str r3, [r2] - adds r2, r2, #4 - -LoopFillZerobss: - cmp r2, r4 - bcc FillZerobss - -/* Call the clock system intitialization function.*/ - bl SystemInit -/* Call static constructors */ - bl __libc_init_array -/* Call the application's entry point.*/ - bl main - -LoopForever: - b LoopForever - - -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * - * @param None - * @retval : None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M0. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word 0 - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler /* Window WatchDog */ - .word 0 /* Reserved */ - .word RTC_IRQHandler /* RTC through the EXTI line */ - .word FLASH_IRQHandler /* FLASH */ - .word RCC_IRQHandler /* RCC */ - .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */ - .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */ - .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */ - .word 0 /* Reserved */ - .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */ - .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */ - .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */ - .word ADC1_IRQHandler /* ADC1 */ - .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */ - .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ - .word 0 /* Reserved */ - .word TIM3_IRQHandler /* TIM3 */ - .word TIM6_IRQHandler /* TIM6 */ - .word TIM7_IRQHandler /* TIM7 */ - .word TIM14_IRQHandler /* TIM14 */ - .word TIM15_IRQHandler /* TIM15 */ - .word TIM16_IRQHandler /* TIM16 */ - .word TIM17_IRQHandler /* TIM17 */ - .word I2C1_IRQHandler /* I2C1 */ - .word I2C2_IRQHandler /* I2C2 */ - .word SPI1_IRQHandler /* SPI1 */ - .word SPI2_IRQHandler /* SPI2 */ - .word USART1_IRQHandler /* USART1 */ - .word USART2_IRQHandler /* USART2 */ - .word USART3_6_IRQHandler /* USART3, USART4, USART5, USART6 */ - .word 0 /* Reserved */ - -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_IRQHandler - .thumb_set RCC_IRQHandler,Default_Handler - - .weak EXTI0_1_IRQHandler - .thumb_set EXTI0_1_IRQHandler,Default_Handler - - .weak EXTI2_3_IRQHandler - .thumb_set EXTI2_3_IRQHandler,Default_Handler - - .weak EXTI4_15_IRQHandler - .thumb_set EXTI4_15_IRQHandler,Default_Handler - - .weak DMA1_Channel1_IRQHandler - .thumb_set DMA1_Channel1_IRQHandler,Default_Handler - - .weak DMA1_Channel2_3_IRQHandler - .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler - - .weak DMA1_Channel4_5_IRQHandler - .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler - - .weak ADC1_IRQHandler - .thumb_set ADC1_IRQHandler,Default_Handler - - .weak TIM1_BRK_UP_TRG_COM_IRQHandler - .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak TIM6_IRQHandler - .thumb_set TIM6_IRQHandler,Default_Handler - - .weak TIM7_IRQHandler - .thumb_set TIM7_IRQHandler,Default_Handler - - .weak TIM14_IRQHandler - .thumb_set TIM14_IRQHandler,Default_Handler - - .weak TIM15_IRQHandler - .thumb_set TIM15_IRQHandler,Default_Handler - - .weak TIM16_IRQHandler - .thumb_set TIM16_IRQHandler,Default_Handler - - .weak TIM17_IRQHandler - .thumb_set TIM17_IRQHandler,Default_Handler - - .weak I2C1_IRQHandler - .thumb_set I2C1_IRQHandler,Default_Handler - - .weak I2C2_IRQHandler - .thumb_set I2C2_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak SPI2_IRQHandler - .thumb_set SPI2_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - - .weak USART3_6_IRQHandler - .thumb_set USART3_6_IRQHandler,Default_Handler - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f031x6.s b/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f031x6.s deleted file mode 100644 index 3d990f9..0000000 --- a/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f031x6.s +++ /dev/null @@ -1,264 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32f031x6.s - * @author MCD Application Team - * @brief STM32F031x4/STM32F031x6 devices vector table for GCC toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M0 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - - .syntax unified - .cpu cortex-m0 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - ldr r0, =_estack - mov sp, r0 /* set stack pointer */ - -/* Copy the data segment initializers from flash to SRAM */ - ldr r0, =_sdata - ldr r1, =_edata - ldr r2, =_sidata - movs r3, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r4, [r2, r3] - str r4, [r0, r3] - adds r3, r3, #4 - -LoopCopyDataInit: - adds r4, r0, r3 - cmp r4, r1 - bcc CopyDataInit - -/* Zero fill the bss segment. */ - ldr r2, =_sbss - ldr r4, =_ebss - movs r3, #0 - b LoopFillZerobss - -FillZerobss: - str r3, [r2] - adds r2, r2, #4 - -LoopFillZerobss: - cmp r2, r4 - bcc FillZerobss - -/* Call the clock system intitialization function.*/ - bl SystemInit -/* Call static constructors */ - bl __libc_init_array -/* Call the application's entry point.*/ - bl main - -LoopForever: - b LoopForever - - -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * - * @param None - * @retval : None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M0. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word 0 - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler /* Window WatchDog */ - .word PVD_IRQHandler /* PVD through EXTI Line detect */ - .word RTC_IRQHandler /* RTC through the EXTI line */ - .word FLASH_IRQHandler /* FLASH */ - .word RCC_IRQHandler /* RCC */ - .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */ - .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */ - .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */ - .word 0 /* Reserved */ - .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */ - .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */ - .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */ - .word ADC1_IRQHandler /* ADC1 */ - .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */ - .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ - .word TIM2_IRQHandler /* TIM2 */ - .word TIM3_IRQHandler /* TIM3 */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - .word TIM14_IRQHandler /* TIM14 */ - .word 0 /* Reserved */ - .word TIM16_IRQHandler /* TIM16 */ - .word TIM17_IRQHandler /* TIM17 */ - .word I2C1_IRQHandler /* I2C1 */ - .word 0 /* Reserved */ - .word SPI1_IRQHandler /* SPI1 */ - .word 0 /* Reserved */ - .word USART1_IRQHandler /* USART1 */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak PVD_IRQHandler - .thumb_set PVD_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_IRQHandler - .thumb_set RCC_IRQHandler,Default_Handler - - .weak EXTI0_1_IRQHandler - .thumb_set EXTI0_1_IRQHandler,Default_Handler - - .weak EXTI2_3_IRQHandler - .thumb_set EXTI2_3_IRQHandler,Default_Handler - - .weak EXTI4_15_IRQHandler - .thumb_set EXTI4_15_IRQHandler,Default_Handler - - .weak DMA1_Channel1_IRQHandler - .thumb_set DMA1_Channel1_IRQHandler,Default_Handler - - .weak DMA1_Channel2_3_IRQHandler - .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler - - .weak DMA1_Channel4_5_IRQHandler - .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler - - .weak ADC1_IRQHandler - .thumb_set ADC1_IRQHandler,Default_Handler - - .weak TIM1_BRK_UP_TRG_COM_IRQHandler - .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM2_IRQHandler - .thumb_set TIM2_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak TIM14_IRQHandler - .thumb_set TIM14_IRQHandler,Default_Handler - - .weak TIM16_IRQHandler - .thumb_set TIM16_IRQHandler,Default_Handler - - .weak TIM17_IRQHandler - .thumb_set TIM17_IRQHandler,Default_Handler - - .weak I2C1_IRQHandler - .thumb_set I2C1_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f038xx.s b/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f038xx.s deleted file mode 100644 index 5059094..0000000 --- a/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f038xx.s +++ /dev/null @@ -1,261 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32f038xx.s - * @author MCD Application Team - * @brief STM32F038xx devices vector table for GCC toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M0 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - - .syntax unified - .cpu cortex-m0 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - ldr r0, =_estack - mov sp, r0 /* set stack pointer */ - -/* Copy the data segment initializers from flash to SRAM */ - ldr r0, =_sdata - ldr r1, =_edata - ldr r2, =_sidata - movs r3, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r4, [r2, r3] - str r4, [r0, r3] - adds r3, r3, #4 - -LoopCopyDataInit: - adds r4, r0, r3 - cmp r4, r1 - bcc CopyDataInit - -/* Zero fill the bss segment. */ - ldr r2, =_sbss - ldr r4, =_ebss - movs r3, #0 - b LoopFillZerobss - -FillZerobss: - str r3, [r2] - adds r2, r2, #4 - -LoopFillZerobss: - cmp r2, r4 - bcc FillZerobss - -/* Call the clock system intitialization function.*/ - bl SystemInit -/* Call static constructors */ - bl __libc_init_array -/* Call the application's entry point.*/ - bl main - -LoopForever: - b LoopForever - - -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * - * @param None - * @retval : None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M0. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word 0 - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler /* Window WatchDog */ - .word 0 /* Reserved */ - .word RTC_IRQHandler /* RTC through the EXTI line */ - .word FLASH_IRQHandler /* FLASH */ - .word RCC_IRQHandler /* RCC */ - .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */ - .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */ - .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */ - .word 0 /* Reserved */ - .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */ - .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */ - .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */ - .word ADC1_IRQHandler /* ADC1 */ - .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */ - .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ - .word TIM2_IRQHandler /* TIM2 */ - .word TIM3_IRQHandler /* TIM3 */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - .word TIM14_IRQHandler /* TIM14 */ - .word 0 /* Reserved */ - .word TIM16_IRQHandler /* TIM16 */ - .word TIM17_IRQHandler /* TIM17 */ - .word I2C1_IRQHandler /* I2C1 */ - .word 0 /* Reserved */ - .word SPI1_IRQHandler /* SPI1 */ - .word 0 /* Reserved */ - .word USART1_IRQHandler /* USART1 */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_IRQHandler - .thumb_set RCC_IRQHandler,Default_Handler - - .weak EXTI0_1_IRQHandler - .thumb_set EXTI0_1_IRQHandler,Default_Handler - - .weak EXTI2_3_IRQHandler - .thumb_set EXTI2_3_IRQHandler,Default_Handler - - .weak EXTI4_15_IRQHandler - .thumb_set EXTI4_15_IRQHandler,Default_Handler - - .weak DMA1_Channel1_IRQHandler - .thumb_set DMA1_Channel1_IRQHandler,Default_Handler - - .weak DMA1_Channel2_3_IRQHandler - .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler - - .weak DMA1_Channel4_5_IRQHandler - .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler - - .weak ADC1_IRQHandler - .thumb_set ADC1_IRQHandler,Default_Handler - - .weak TIM1_BRK_UP_TRG_COM_IRQHandler - .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM2_IRQHandler - .thumb_set TIM2_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak TIM14_IRQHandler - .thumb_set TIM14_IRQHandler,Default_Handler - - .weak TIM16_IRQHandler - .thumb_set TIM16_IRQHandler,Default_Handler - - .weak TIM17_IRQHandler - .thumb_set TIM17_IRQHandler,Default_Handler - - .weak I2C1_IRQHandler - .thumb_set I2C1_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f042x6.s b/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f042x6.s deleted file mode 100644 index 2f80631..0000000 --- a/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f042x6.s +++ /dev/null @@ -1,309 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32f042x6.s - * @author MCD Application Team - * @brief STM32F042x4/STM32F042x6 devices vector table for GCC toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M0 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - - .syntax unified - .cpu cortex-m0 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss - -/** - * @brief This is the code that gets called when the processor first - * starts execution following a reset event. Only the absolutely - * necessary set is performed, after which the application - * supplied main() routine is called. - * @param None - * @retval : None -*/ - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - ldr r0, =_estack - mov sp, r0 /* set stack pointer */ - -/*Check if boot space corresponds to test memory*/ - - LDR R0,=0x00000004 - LDR R1, [R0] - LSRS R1, R1, #24 - LDR R2,=0x1F - CMP R1, R2 - BNE ApplicationStart - - /*SYSCFG clock enable*/ - - LDR R0,=0x40021018 - LDR R1,=0x00000001 - STR R1, [R0] - -/*Set CFGR1 register with flash memory remap at address 0*/ - LDR R0,=0x40010000 - LDR R1,=0x00000000 - STR R1, [R0] - -ApplicationStart: -/* Copy the data segment initializers from flash to SRAM */ - ldr r0, =_sdata - ldr r1, =_edata - ldr r2, =_sidata - movs r3, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r4, [r2, r3] - str r4, [r0, r3] - adds r3, r3, #4 - -LoopCopyDataInit: - adds r4, r0, r3 - cmp r4, r1 - bcc CopyDataInit - -/* Zero fill the bss segment. */ - ldr r2, =_sbss - ldr r4, =_ebss - movs r3, #0 - b LoopFillZerobss - -FillZerobss: - str r3, [r2] - adds r2, r2, #4 - -LoopFillZerobss: - cmp r2, r4 - bcc FillZerobss - -/* Call the clock system intitialization function.*/ - bl SystemInit -/* Call static constructors */ - bl __libc_init_array -/* Call the application's entry point.*/ - bl main - -LoopForever: - b LoopForever - - -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * - * @param None - * @retval : None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M0. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word 0 - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler /* Window WatchDog */ - .word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */ - .word RTC_IRQHandler /* RTC through the EXTI line */ - .word FLASH_IRQHandler /* FLASH */ - .word RCC_CRS_IRQHandler /* RCC and CRS */ - .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */ - .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */ - .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */ - .word TSC_IRQHandler /* TSC */ - .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */ - .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */ - .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */ - .word ADC1_IRQHandler /* ADC1 */ - .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */ - .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ - .word TIM2_IRQHandler /* TIM2 */ - .word TIM3_IRQHandler /* TIM3 */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - .word TIM14_IRQHandler /* TIM14 */ - .word 0 /* Reserved */ - .word TIM16_IRQHandler /* TIM16 */ - .word TIM17_IRQHandler /* TIM17 */ - .word I2C1_IRQHandler /* I2C1 */ - .word 0 /* Reserved */ - .word SPI1_IRQHandler /* SPI1 */ - .word SPI2_IRQHandler /* SPI2 */ - .word USART1_IRQHandler /* USART1 */ - .word USART2_IRQHandler /* USART2 */ - .word 0 /* Reserved */ - .word CEC_CAN_IRQHandler /* CEC and CAN */ - .word USB_IRQHandler /* USB */ - -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak PVD_VDDIO2_IRQHandler - .thumb_set PVD_VDDIO2_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_CRS_IRQHandler - .thumb_set RCC_CRS_IRQHandler,Default_Handler - - .weak EXTI0_1_IRQHandler - .thumb_set EXTI0_1_IRQHandler,Default_Handler - - .weak EXTI2_3_IRQHandler - .thumb_set EXTI2_3_IRQHandler,Default_Handler - - .weak EXTI4_15_IRQHandler - .thumb_set EXTI4_15_IRQHandler,Default_Handler - - .weak TSC_IRQHandler - .thumb_set TSC_IRQHandler,Default_Handler - - .weak DMA1_Channel1_IRQHandler - .thumb_set DMA1_Channel1_IRQHandler,Default_Handler - - .weak DMA1_Channel2_3_IRQHandler - .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler - - .weak DMA1_Channel4_5_IRQHandler - .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler - - .weak ADC1_IRQHandler - .thumb_set ADC1_IRQHandler,Default_Handler - - .weak TIM1_BRK_UP_TRG_COM_IRQHandler - .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM2_IRQHandler - .thumb_set TIM2_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak TIM14_IRQHandler - .thumb_set TIM14_IRQHandler,Default_Handler - - .weak TIM16_IRQHandler - .thumb_set TIM16_IRQHandler,Default_Handler - - .weak TIM17_IRQHandler - .thumb_set TIM17_IRQHandler,Default_Handler - - .weak I2C1_IRQHandler - .thumb_set I2C1_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak SPI2_IRQHandler - .thumb_set SPI2_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - - .weak CEC_CAN_IRQHandler - .thumb_set CEC_CAN_IRQHandler,Default_Handler - - .weak USB_IRQHandler - .thumb_set USB_IRQHandler,Default_Handler - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f048xx.s b/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f048xx.s deleted file mode 100644 index b0c04f1..0000000 --- a/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f048xx.s +++ /dev/null @@ -1,279 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32f048xx.s - * @author MCD Application Team - * @brief STM32F048xx devices vector table for GCC toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M0 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - - .syntax unified - .cpu cortex-m0 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - ldr r0, =_estack - mov sp, r0 /* set stack pointer */ - -/* Copy the data segment initializers from flash to SRAM */ - ldr r0, =_sdata - ldr r1, =_edata - ldr r2, =_sidata - movs r3, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r4, [r2, r3] - str r4, [r0, r3] - adds r3, r3, #4 - -LoopCopyDataInit: - adds r4, r0, r3 - cmp r4, r1 - bcc CopyDataInit - -/* Zero fill the bss segment. */ - ldr r2, =_sbss - ldr r4, =_ebss - movs r3, #0 - b LoopFillZerobss - -FillZerobss: - str r3, [r2] - adds r2, r2, #4 - -LoopFillZerobss: - cmp r2, r4 - bcc FillZerobss - -/* Call the clock system intitialization function.*/ - bl SystemInit -/* Call static constructors */ - bl __libc_init_array -/* Call the application's entry point.*/ - bl main - -LoopForever: - b LoopForever - - -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * - * @param None - * @retval : None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M0. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word 0 - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler /* Window WatchDog */ - .word VDDIO2_IRQHandler /* VDDIO2 Monitor through EXTI Line 31 */ - .word RTC_IRQHandler /* RTC through the EXTI line */ - .word FLASH_IRQHandler /* FLASH */ - .word RCC_CRS_IRQHandler /* RCC and CRS */ - .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */ - .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */ - .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */ - .word TSC_IRQHandler /* TSC */ - .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */ - .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */ - .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */ - .word ADC1_IRQHandler /* ADC1 */ - .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */ - .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ - .word TIM2_IRQHandler /* TIM2 */ - .word TIM3_IRQHandler /* TIM3 */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - .word TIM14_IRQHandler /* TIM14 */ - .word 0 /* Reserved */ - .word TIM16_IRQHandler /* TIM16 */ - .word TIM17_IRQHandler /* TIM17 */ - .word I2C1_IRQHandler /* I2C1 */ - .word 0 /* Reserved */ - .word SPI1_IRQHandler /* SPI1 */ - .word SPI2_IRQHandler /* SPI2 */ - .word USART1_IRQHandler /* USART1 */ - .word USART2_IRQHandler /* USART2 */ - .word 0 /* Reserved */ - .word CEC_CAN_IRQHandler /* CEC and CAN */ - .word USB_IRQHandler /* USB */ - -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak VDDIO2_IRQHandler - .thumb_set VDDIO2_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_CRS_IRQHandler - .thumb_set RCC_CRS_IRQHandler,Default_Handler - - .weak EXTI0_1_IRQHandler - .thumb_set EXTI0_1_IRQHandler,Default_Handler - - .weak EXTI2_3_IRQHandler - .thumb_set EXTI2_3_IRQHandler,Default_Handler - - .weak EXTI4_15_IRQHandler - .thumb_set EXTI4_15_IRQHandler,Default_Handler - - .weak TSC_IRQHandler - .thumb_set TSC_IRQHandler,Default_Handler - - .weak DMA1_Channel1_IRQHandler - .thumb_set DMA1_Channel1_IRQHandler,Default_Handler - - .weak DMA1_Channel2_3_IRQHandler - .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler - - .weak DMA1_Channel4_5_IRQHandler - .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler - - .weak ADC1_IRQHandler - .thumb_set ADC1_IRQHandler,Default_Handler - - .weak TIM1_BRK_UP_TRG_COM_IRQHandler - .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM2_IRQHandler - .thumb_set TIM2_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak TIM14_IRQHandler - .thumb_set TIM14_IRQHandler,Default_Handler - - .weak TIM16_IRQHandler - .thumb_set TIM16_IRQHandler,Default_Handler - - .weak TIM17_IRQHandler - .thumb_set TIM17_IRQHandler,Default_Handler - - .weak I2C1_IRQHandler - .thumb_set I2C1_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak SPI2_IRQHandler - .thumb_set SPI2_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - - .weak CEC_CAN_IRQHandler - .thumb_set CEC_CAN_IRQHandler,Default_Handler - - .weak USB_IRQHandler - .thumb_set USB_IRQHandler,Default_Handler - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f051x8.s b/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f051x8.s deleted file mode 100644 index 2df2759..0000000 --- a/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f051x8.s +++ /dev/null @@ -1,285 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32f051x8.s - * @author MCD Application Team - * @brief STM32F051x4/STM32F051x6/STM32F051x8 devices vector table for GCC toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M0 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - - .syntax unified - .cpu cortex-m0 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - ldr r0, =_estack - mov sp, r0 /* set stack pointer */ - -/* Copy the data segment initializers from flash to SRAM */ - ldr r0, =_sdata - ldr r1, =_edata - ldr r2, =_sidata - movs r3, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r4, [r2, r3] - str r4, [r0, r3] - adds r3, r3, #4 - -LoopCopyDataInit: - adds r4, r0, r3 - cmp r4, r1 - bcc CopyDataInit - -/* Zero fill the bss segment. */ - ldr r2, =_sbss - ldr r4, =_ebss - movs r3, #0 - b LoopFillZerobss - -FillZerobss: - str r3, [r2] - adds r2, r2, #4 - -LoopFillZerobss: - cmp r2, r4 - bcc FillZerobss - -/* Call the clock system intitialization function.*/ - bl SystemInit -/* Call static constructors */ - bl __libc_init_array -/* Call the application's entry point.*/ - bl main - -LoopForever: - b LoopForever - - -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * - * @param None - * @retval : None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M0. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word 0 - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler /* Window WatchDog */ - .word PVD_IRQHandler /* PVD through EXTI Line detect */ - .word RTC_IRQHandler /* RTC through the EXTI line */ - .word FLASH_IRQHandler /* FLASH */ - .word RCC_CRS_IRQHandler /* RCC and CRS */ - .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */ - .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */ - .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */ - .word TSC_IRQHandler /* TSC */ - .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */ - .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */ - .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */ - .word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */ - .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */ - .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ - .word TIM2_IRQHandler /* TIM2 */ - .word TIM3_IRQHandler /* TIM3 */ - .word TIM6_DAC_IRQHandler /* TIM6 and DAC */ - .word 0 /* Reserved */ - .word TIM14_IRQHandler /* TIM14 */ - .word TIM15_IRQHandler /* TIM15 */ - .word TIM16_IRQHandler /* TIM16 */ - .word TIM17_IRQHandler /* TIM17 */ - .word I2C1_IRQHandler /* I2C1 */ - .word I2C2_IRQHandler /* I2C2 */ - .word SPI1_IRQHandler /* SPI1 */ - .word SPI2_IRQHandler /* SPI2 */ - .word USART1_IRQHandler /* USART1 */ - .word USART2_IRQHandler /* USART2 */ - .word 0 /* Reserved */ - .word CEC_CAN_IRQHandler /* CEC and CAN */ - .word 0 /* Reserved */ - -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak PVD_IRQHandler - .thumb_set PVD_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_CRS_IRQHandler - .thumb_set RCC_CRS_IRQHandler,Default_Handler - - .weak EXTI0_1_IRQHandler - .thumb_set EXTI0_1_IRQHandler,Default_Handler - - .weak EXTI2_3_IRQHandler - .thumb_set EXTI2_3_IRQHandler,Default_Handler - - .weak EXTI4_15_IRQHandler - .thumb_set EXTI4_15_IRQHandler,Default_Handler - - .weak TSC_IRQHandler - .thumb_set TSC_IRQHandler,Default_Handler - - .weak DMA1_Channel1_IRQHandler - .thumb_set DMA1_Channel1_IRQHandler,Default_Handler - - .weak DMA1_Channel2_3_IRQHandler - .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler - - .weak DMA1_Channel4_5_IRQHandler - .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler - - .weak ADC1_COMP_IRQHandler - .thumb_set ADC1_COMP_IRQHandler,Default_Handler - - .weak TIM1_BRK_UP_TRG_COM_IRQHandler - .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM2_IRQHandler - .thumb_set TIM2_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak TIM6_DAC_IRQHandler - .thumb_set TIM6_DAC_IRQHandler,Default_Handler - - .weak TIM14_IRQHandler - .thumb_set TIM14_IRQHandler,Default_Handler - - .weak TIM15_IRQHandler - .thumb_set TIM15_IRQHandler,Default_Handler - - .weak TIM16_IRQHandler - .thumb_set TIM16_IRQHandler,Default_Handler - - .weak TIM17_IRQHandler - .thumb_set TIM17_IRQHandler,Default_Handler - - .weak I2C1_IRQHandler - .thumb_set I2C1_IRQHandler,Default_Handler - - .weak I2C2_IRQHandler - .thumb_set I2C2_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak SPI2_IRQHandler - .thumb_set SPI2_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - - .weak CEC_CAN_IRQHandler - .thumb_set CEC_CAN_IRQHandler,Default_Handler - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f058xx.s b/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f058xx.s deleted file mode 100644 index f934e6b..0000000 --- a/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f058xx.s +++ /dev/null @@ -1,282 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32f058xx.s - * @author MCD Application Team - * @brief STM32F058xx devices vector table for GCC toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M0 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - - .syntax unified - .cpu cortex-m0 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - ldr r0, =_estack - mov sp, r0 /* set stack pointer */ - -/* Copy the data segment initializers from flash to SRAM */ - ldr r0, =_sdata - ldr r1, =_edata - ldr r2, =_sidata - movs r3, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r4, [r2, r3] - str r4, [r0, r3] - adds r3, r3, #4 - -LoopCopyDataInit: - adds r4, r0, r3 - cmp r4, r1 - bcc CopyDataInit - -/* Zero fill the bss segment. */ - ldr r2, =_sbss - ldr r4, =_ebss - movs r3, #0 - b LoopFillZerobss - -FillZerobss: - str r3, [r2] - adds r2, r2, #4 - -LoopFillZerobss: - cmp r2, r4 - bcc FillZerobss - -/* Call the clock system intitialization function.*/ - bl SystemInit -/* Call static constructors */ - bl __libc_init_array -/* Call the application's entry point.*/ - bl main - -LoopForever: - b LoopForever - - -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * - * @param None - * @retval : None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M0. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word 0 - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler /* Window WatchDog */ - .word 0 /* Reserved */ - .word RTC_IRQHandler /* RTC through the EXTI line */ - .word FLASH_IRQHandler /* FLASH */ - .word RCC_CRS_IRQHandler /* RCC and CRS */ - .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */ - .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */ - .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */ - .word TSC_IRQHandler /* TSC */ - .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */ - .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */ - .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */ - .word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */ - .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */ - .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ - .word TIM2_IRQHandler /* TIM2 */ - .word TIM3_IRQHandler /* TIM3 */ - .word TIM6_DAC_IRQHandler /* TIM6 and DAC */ - .word 0 /* Reserved */ - .word TIM14_IRQHandler /* TIM14 */ - .word TIM15_IRQHandler /* TIM15 */ - .word TIM16_IRQHandler /* TIM16 */ - .word TIM17_IRQHandler /* TIM17 */ - .word I2C1_IRQHandler /* I2C1 */ - .word I2C2_IRQHandler /* I2C2 */ - .word SPI1_IRQHandler /* SPI1 */ - .word SPI2_IRQHandler /* SPI2 */ - .word USART1_IRQHandler /* USART1 */ - .word USART2_IRQHandler /* USART2 */ - .word 0 /* Reserved */ - .word CEC_CAN_IRQHandler /* CEC and CAN */ - .word 0 /* Reserved */ - -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_CRS_IRQHandler - .thumb_set RCC_CRS_IRQHandler,Default_Handler - - .weak EXTI0_1_IRQHandler - .thumb_set EXTI0_1_IRQHandler,Default_Handler - - .weak EXTI2_3_IRQHandler - .thumb_set EXTI2_3_IRQHandler,Default_Handler - - .weak EXTI4_15_IRQHandler - .thumb_set EXTI4_15_IRQHandler,Default_Handler - - .weak TSC_IRQHandler - .thumb_set TSC_IRQHandler,Default_Handler - - .weak DMA1_Channel1_IRQHandler - .thumb_set DMA1_Channel1_IRQHandler,Default_Handler - - .weak DMA1_Channel2_3_IRQHandler - .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler - - .weak DMA1_Channel4_5_IRQHandler - .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler - - .weak ADC1_COMP_IRQHandler - .thumb_set ADC1_COMP_IRQHandler,Default_Handler - - .weak TIM1_BRK_UP_TRG_COM_IRQHandler - .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM2_IRQHandler - .thumb_set TIM2_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak TIM6_DAC_IRQHandler - .thumb_set TIM6_DAC_IRQHandler,Default_Handler - - .weak TIM14_IRQHandler - .thumb_set TIM14_IRQHandler,Default_Handler - - .weak TIM15_IRQHandler - .thumb_set TIM15_IRQHandler,Default_Handler - - .weak TIM16_IRQHandler - .thumb_set TIM16_IRQHandler,Default_Handler - - .weak TIM17_IRQHandler - .thumb_set TIM17_IRQHandler,Default_Handler - - .weak I2C1_IRQHandler - .thumb_set I2C1_IRQHandler,Default_Handler - - .weak I2C2_IRQHandler - .thumb_set I2C2_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak SPI2_IRQHandler - .thumb_set SPI2_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - - .weak CEC_CAN_IRQHandler - .thumb_set CEC_CAN_IRQHandler,Default_Handler - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f070x6.s b/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f070x6.s deleted file mode 100644 index c9e85bc..0000000 --- a/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f070x6.s +++ /dev/null @@ -1,294 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32f070x6.s - * @author MCD Application Team - * @brief STM32F070x4/STM32F070x6 devices vector table for GCC toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M0 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - - .syntax unified - .cpu cortex-m0 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss - -/** - * @brief This is the code that gets called when the processor first - * starts execution following a reset event. Only the absolutely - * necessary set is performed, after which the application - * supplied main() routine is called. - * @param None - * @retval : None -*/ - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - ldr r0, =_estack - mov sp, r0 /* set stack pointer */ - -/*Check if boot space corresponds to test memory*/ - - LDR R0,=0x00000004 - LDR R1, [R0] - LSRS R1, R1, #24 - LDR R2,=0x1F - CMP R1, R2 - BNE ApplicationStart - - /*SYSCFG clock enable*/ - - LDR R0,=0x40021018 - LDR R1,=0x00000001 - STR R1, [R0] - -/*Set CFGR1 register with flash memory remap at address 0*/ - LDR R0,=0x40010000 - LDR R1,=0x00000000 - STR R1, [R0] - -ApplicationStart: -/* Copy the data segment initializers from flash to SRAM */ - ldr r0, =_sdata - ldr r1, =_edata - ldr r2, =_sidata - movs r3, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r4, [r2, r3] - str r4, [r0, r3] - adds r3, r3, #4 - -LoopCopyDataInit: - adds r4, r0, r3 - cmp r4, r1 - bcc CopyDataInit - -/* Zero fill the bss segment. */ - ldr r2, =_sbss - ldr r4, =_ebss - movs r3, #0 - b LoopFillZerobss - -FillZerobss: - str r3, [r2] - adds r2, r2, #4 - -LoopFillZerobss: - cmp r2, r4 - bcc FillZerobss - -/* Call the clock system intitialization function.*/ - bl SystemInit -/* Call static constructors */ - bl __libc_init_array -/* Call the application's entry point.*/ - bl main - -LoopForever: - b LoopForever - - -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * - * @param None - * @retval : None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M0. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word 0 - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler /* Window WatchDog */ - .word 0 /* Reserved */ - .word RTC_IRQHandler /* RTC through the EXTI line */ - .word FLASH_IRQHandler /* FLASH */ - .word RCC_IRQHandler /* RCC */ - .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */ - .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */ - .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */ - .word 0 /* Reserved */ - .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */ - .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */ - .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */ - .word ADC1_IRQHandler /* ADC1 */ - .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */ - .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ - .word 0 /* Reserved */ - .word TIM3_IRQHandler /* TIM3 */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - .word TIM14_IRQHandler /* TIM14 */ - .word 0 /* Reserved */ - .word TIM16_IRQHandler /* TIM16 */ - .word TIM17_IRQHandler /* TIM17 */ - .word I2C1_IRQHandler /* I2C1 */ - .word 0 /* Reserved */ - .word SPI1_IRQHandler /* SPI1 */ - .word 0 /* Reserved */ - .word USART1_IRQHandler /* USART1 */ - .word USART2_IRQHandler /* USART2 */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - .word USB_IRQHandler /* USB */ - -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_IRQHandler - .thumb_set RCC_IRQHandler,Default_Handler - - .weak EXTI0_1_IRQHandler - .thumb_set EXTI0_1_IRQHandler,Default_Handler - - .weak EXTI2_3_IRQHandler - .thumb_set EXTI2_3_IRQHandler,Default_Handler - - .weak EXTI4_15_IRQHandler - .thumb_set EXTI4_15_IRQHandler,Default_Handler - - .weak DMA1_Channel1_IRQHandler - .thumb_set DMA1_Channel1_IRQHandler,Default_Handler - - .weak DMA1_Channel2_3_IRQHandler - .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler - - .weak DMA1_Channel4_5_IRQHandler - .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler - - .weak ADC1_IRQHandler - .thumb_set ADC1_IRQHandler,Default_Handler - - .weak TIM1_BRK_UP_TRG_COM_IRQHandler - .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak TIM14_IRQHandler - .thumb_set TIM14_IRQHandler,Default_Handler - - .weak TIM16_IRQHandler - .thumb_set TIM16_IRQHandler,Default_Handler - - .weak TIM17_IRQHandler - .thumb_set TIM17_IRQHandler,Default_Handler - - .weak I2C1_IRQHandler - .thumb_set I2C1_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - - .weak USB_IRQHandler - .thumb_set USB_IRQHandler,Default_Handler - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f070xb.s b/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f070xb.s deleted file mode 100644 index c3026e0..0000000 --- a/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f070xb.s +++ /dev/null @@ -1,282 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32f070xb.s - * @author MCD Application Team - * @brief STM32F070xb/STM32F070x8 devices vector table for GCC toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M0 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - - .syntax unified - .cpu cortex-m0 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - ldr r0, =_estack - mov sp, r0 /* set stack pointer */ - -/* Copy the data segment initializers from flash to SRAM */ - ldr r0, =_sdata - ldr r1, =_edata - ldr r2, =_sidata - movs r3, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r4, [r2, r3] - str r4, [r0, r3] - adds r3, r3, #4 - -LoopCopyDataInit: - adds r4, r0, r3 - cmp r4, r1 - bcc CopyDataInit - -/* Zero fill the bss segment. */ - ldr r2, =_sbss - ldr r4, =_ebss - movs r3, #0 - b LoopFillZerobss - -FillZerobss: - str r3, [r2] - adds r2, r2, #4 - -LoopFillZerobss: - cmp r2, r4 - bcc FillZerobss - -/* Call the clock system intitialization function.*/ - bl SystemInit -/* Call static constructors */ - bl __libc_init_array -/* Call the application's entry point.*/ - bl main - -LoopForever: - b LoopForever - - -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * - * @param None - * @retval : None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M0. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word 0 - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler /* Window WatchDog */ - .word 0 /* Reserved */ - .word RTC_IRQHandler /* RTC through the EXTI line */ - .word FLASH_IRQHandler /* FLASH */ - .word RCC_IRQHandler /* RCC */ - .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */ - .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */ - .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */ - .word 0 /* Reserved */ - .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */ - .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */ - .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */ - .word ADC1_IRQHandler /* ADC1 */ - .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */ - .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ - .word 0 /* Reserved */ - .word TIM3_IRQHandler /* TIM3 */ - .word TIM6_IRQHandler /* TIM6 */ - .word TIM7_IRQHandler /* TIM7 */ - .word TIM14_IRQHandler /* TIM14 */ - .word TIM15_IRQHandler /* TIM15 */ - .word TIM16_IRQHandler /* TIM16 */ - .word TIM17_IRQHandler /* TIM17 */ - .word I2C1_IRQHandler /* I2C1 */ - .word I2C2_IRQHandler /* I2C2 */ - .word SPI1_IRQHandler /* SPI1 */ - .word SPI2_IRQHandler /* SPI2 */ - .word USART1_IRQHandler /* USART1 */ - .word USART2_IRQHandler /* USART2 */ - .word USART3_4_IRQHandler /* USART3 and USART4 */ - .word 0 /* Reserved */ - .word USB_IRQHandler /* USB */ - -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_IRQHandler - .thumb_set RCC_IRQHandler,Default_Handler - - .weak EXTI0_1_IRQHandler - .thumb_set EXTI0_1_IRQHandler,Default_Handler - - .weak EXTI2_3_IRQHandler - .thumb_set EXTI2_3_IRQHandler,Default_Handler - - .weak EXTI4_15_IRQHandler - .thumb_set EXTI4_15_IRQHandler,Default_Handler - - .weak DMA1_Channel1_IRQHandler - .thumb_set DMA1_Channel1_IRQHandler,Default_Handler - - .weak DMA1_Channel2_3_IRQHandler - .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler - - .weak DMA1_Channel4_5_IRQHandler - .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler - - .weak ADC1_IRQHandler - .thumb_set ADC1_IRQHandler,Default_Handler - - .weak TIM1_BRK_UP_TRG_COM_IRQHandler - .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak TIM6_IRQHandler - .thumb_set TIM6_IRQHandler,Default_Handler - - .weak TIM7_IRQHandler - .thumb_set TIM7_IRQHandler,Default_Handler - - .weak TIM14_IRQHandler - .thumb_set TIM14_IRQHandler,Default_Handler - - .weak TIM15_IRQHandler - .thumb_set TIM15_IRQHandler,Default_Handler - - .weak TIM16_IRQHandler - .thumb_set TIM16_IRQHandler,Default_Handler - - .weak TIM17_IRQHandler - .thumb_set TIM17_IRQHandler,Default_Handler - - .weak I2C1_IRQHandler - .thumb_set I2C1_IRQHandler,Default_Handler - - .weak I2C2_IRQHandler - .thumb_set I2C2_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak SPI2_IRQHandler - .thumb_set SPI2_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - - .weak USART3_4_IRQHandler - .thumb_set USART3_4_IRQHandler,Default_Handler - - .weak USB_IRQHandler - .thumb_set USB_IRQHandler,Default_Handler - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f071xb.s b/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f071xb.s deleted file mode 100644 index 7dcb62d..0000000 --- a/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f071xb.s +++ /dev/null @@ -1,291 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32f071xb.s - * @author MCD Application Team - * @brief STM32F071x8/STM32F071xB devices vector table for GCC toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M0 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - - .syntax unified - .cpu cortex-m0 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - ldr r0, =_estack - mov sp, r0 /* set stack pointer */ - -/* Copy the data segment initializers from flash to SRAM */ - ldr r0, =_sdata - ldr r1, =_edata - ldr r2, =_sidata - movs r3, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r4, [r2, r3] - str r4, [r0, r3] - adds r3, r3, #4 - -LoopCopyDataInit: - adds r4, r0, r3 - cmp r4, r1 - bcc CopyDataInit - -/* Zero fill the bss segment. */ - ldr r2, =_sbss - ldr r4, =_ebss - movs r3, #0 - b LoopFillZerobss - -FillZerobss: - str r3, [r2] - adds r2, r2, #4 - -LoopFillZerobss: - cmp r2, r4 - bcc FillZerobss - -/* Call the clock system intitialization function.*/ - bl SystemInit -/* Call static constructors */ - bl __libc_init_array -/* Call the application's entry point.*/ - bl main - -LoopForever: - b LoopForever - - -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * - * @param None - * @retval : None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M0. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word 0 - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler /* Window WatchDog */ - .word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */ - .word RTC_IRQHandler /* RTC through the EXTI line */ - .word FLASH_IRQHandler /* FLASH */ - .word RCC_CRS_IRQHandler /* RCC and CRS */ - .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */ - .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */ - .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */ - .word TSC_IRQHandler /* TSC */ - .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */ - .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */ - .word DMA1_Channel4_5_6_7_IRQHandler /* DMA1 Channel 4, Channel 5, Channel 6 and Channel 7*/ - .word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */ - .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */ - .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ - .word TIM2_IRQHandler /* TIM2 */ - .word TIM3_IRQHandler /* TIM3 */ - .word TIM6_DAC_IRQHandler /* TIM6 and DAC */ - .word TIM7_IRQHandler /* TIM7 */ - .word TIM14_IRQHandler /* TIM14 */ - .word TIM15_IRQHandler /* TIM15 */ - .word TIM16_IRQHandler /* TIM16 */ - .word TIM17_IRQHandler /* TIM17 */ - .word I2C1_IRQHandler /* I2C1 */ - .word I2C2_IRQHandler /* I2C2 */ - .word SPI1_IRQHandler /* SPI1 */ - .word SPI2_IRQHandler /* SPI2 */ - .word USART1_IRQHandler /* USART1 */ - .word USART2_IRQHandler /* USART2 */ - .word USART3_4_IRQHandler /* USART3 and USART4 */ - .word CEC_CAN_IRQHandler /* CEC and CAN */ - .word 0 /* Reserved */ - -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak PVD_VDDIO2_IRQHandler - .thumb_set PVD_VDDIO2_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_CRS_IRQHandler - .thumb_set RCC_CRS_IRQHandler,Default_Handler - - .weak EXTI0_1_IRQHandler - .thumb_set EXTI0_1_IRQHandler,Default_Handler - - .weak EXTI2_3_IRQHandler - .thumb_set EXTI2_3_IRQHandler,Default_Handler - - .weak EXTI4_15_IRQHandler - .thumb_set EXTI4_15_IRQHandler,Default_Handler - - .weak TSC_IRQHandler - .thumb_set TSC_IRQHandler,Default_Handler - - .weak DMA1_Channel1_IRQHandler - .thumb_set DMA1_Channel1_IRQHandler,Default_Handler - - .weak DMA1_Channel2_3_IRQHandler - .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler - - .weak DMA1_Channel4_5_6_7_IRQHandler - .thumb_set DMA1_Channel4_5_6_7_IRQHandler,Default_Handler - - .weak ADC1_COMP_IRQHandler - .thumb_set ADC1_COMP_IRQHandler,Default_Handler - - .weak TIM1_BRK_UP_TRG_COM_IRQHandler - .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM2_IRQHandler - .thumb_set TIM2_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak TIM6_DAC_IRQHandler - .thumb_set TIM6_DAC_IRQHandler,Default_Handler - - .weak TIM7_IRQHandler - .thumb_set TIM7_IRQHandler,Default_Handler - - .weak TIM14_IRQHandler - .thumb_set TIM14_IRQHandler,Default_Handler - - .weak TIM15_IRQHandler - .thumb_set TIM15_IRQHandler,Default_Handler - - .weak TIM16_IRQHandler - .thumb_set TIM16_IRQHandler,Default_Handler - - .weak TIM17_IRQHandler - .thumb_set TIM17_IRQHandler,Default_Handler - - .weak I2C1_IRQHandler - .thumb_set I2C1_IRQHandler,Default_Handler - - .weak I2C2_IRQHandler - .thumb_set I2C2_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak SPI2_IRQHandler - .thumb_set SPI2_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - - .weak USART3_4_IRQHandler - .thumb_set USART3_4_IRQHandler,Default_Handler - - .weak CEC_CAN_IRQHandler - .thumb_set CEC_CAN_IRQHandler,Default_Handler - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f072xb.s b/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f072xb.s deleted file mode 100644 index 9d431a9..0000000 --- a/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f072xb.s +++ /dev/null @@ -1,294 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32f072xb.s - * @author MCD Application Team - * @brief STM32F072x8/STM32F072xB devices vector table for GCC toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M0 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - - .syntax unified - .cpu cortex-m0 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - ldr r0, =_estack - mov sp, r0 /* set stack pointer */ - -/* Copy the data segment initializers from flash to SRAM */ - ldr r0, =_sdata - ldr r1, =_edata - ldr r2, =_sidata - movs r3, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r4, [r2, r3] - str r4, [r0, r3] - adds r3, r3, #4 - -LoopCopyDataInit: - adds r4, r0, r3 - cmp r4, r1 - bcc CopyDataInit - -/* Zero fill the bss segment. */ - ldr r2, =_sbss - ldr r4, =_ebss - movs r3, #0 - b LoopFillZerobss - -FillZerobss: - str r3, [r2] - adds r2, r2, #4 - -LoopFillZerobss: - cmp r2, r4 - bcc FillZerobss - -/* Call the clock system intitialization function.*/ - bl SystemInit -/* Call static constructors */ - bl __libc_init_array -/* Call the application's entry point.*/ - bl main - -LoopForever: - b LoopForever - - -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * - * @param None - * @retval : None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M0. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word 0 - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler /* Window WatchDog */ - .word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */ - .word RTC_IRQHandler /* RTC through the EXTI line */ - .word FLASH_IRQHandler /* FLASH */ - .word RCC_CRS_IRQHandler /* RCC and CRS */ - .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */ - .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */ - .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */ - .word TSC_IRQHandler /* TSC */ - .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */ - .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */ - .word DMA1_Channel4_5_6_7_IRQHandler /* DMA1 Channel 4, Channel 5, Channel 6 and Channel 7*/ - .word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */ - .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */ - .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ - .word TIM2_IRQHandler /* TIM2 */ - .word TIM3_IRQHandler /* TIM3 */ - .word TIM6_DAC_IRQHandler /* TIM6 and DAC */ - .word TIM7_IRQHandler /* TIM7 */ - .word TIM14_IRQHandler /* TIM14 */ - .word TIM15_IRQHandler /* TIM15 */ - .word TIM16_IRQHandler /* TIM16 */ - .word TIM17_IRQHandler /* TIM17 */ - .word I2C1_IRQHandler /* I2C1 */ - .word I2C2_IRQHandler /* I2C2 */ - .word SPI1_IRQHandler /* SPI1 */ - .word SPI2_IRQHandler /* SPI2 */ - .word USART1_IRQHandler /* USART1 */ - .word USART2_IRQHandler /* USART2 */ - .word USART3_4_IRQHandler /* USART3 and USART4 */ - .word CEC_CAN_IRQHandler /* CEC and CAN */ - .word USB_IRQHandler /* USB */ - -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak PVD_VDDIO2_IRQHandler - .thumb_set PVD_VDDIO2_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_CRS_IRQHandler - .thumb_set RCC_CRS_IRQHandler,Default_Handler - - .weak EXTI0_1_IRQHandler - .thumb_set EXTI0_1_IRQHandler,Default_Handler - - .weak EXTI2_3_IRQHandler - .thumb_set EXTI2_3_IRQHandler,Default_Handler - - .weak EXTI4_15_IRQHandler - .thumb_set EXTI4_15_IRQHandler,Default_Handler - - .weak TSC_IRQHandler - .thumb_set TSC_IRQHandler,Default_Handler - - .weak DMA1_Channel1_IRQHandler - .thumb_set DMA1_Channel1_IRQHandler,Default_Handler - - .weak DMA1_Channel2_3_IRQHandler - .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler - - .weak DMA1_Channel4_5_6_7_IRQHandler - .thumb_set DMA1_Channel4_5_6_7_IRQHandler,Default_Handler - - .weak ADC1_COMP_IRQHandler - .thumb_set ADC1_COMP_IRQHandler,Default_Handler - - .weak TIM1_BRK_UP_TRG_COM_IRQHandler - .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM2_IRQHandler - .thumb_set TIM2_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak TIM6_DAC_IRQHandler - .thumb_set TIM6_DAC_IRQHandler,Default_Handler - - .weak TIM7_IRQHandler - .thumb_set TIM7_IRQHandler,Default_Handler - - .weak TIM14_IRQHandler - .thumb_set TIM14_IRQHandler,Default_Handler - - .weak TIM15_IRQHandler - .thumb_set TIM15_IRQHandler,Default_Handler - - .weak TIM16_IRQHandler - .thumb_set TIM16_IRQHandler,Default_Handler - - .weak TIM17_IRQHandler - .thumb_set TIM17_IRQHandler,Default_Handler - - .weak I2C1_IRQHandler - .thumb_set I2C1_IRQHandler,Default_Handler - - .weak I2C2_IRQHandler - .thumb_set I2C2_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak SPI2_IRQHandler - .thumb_set SPI2_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - - .weak USART3_4_IRQHandler - .thumb_set USART3_4_IRQHandler,Default_Handler - - .weak CEC_CAN_IRQHandler - .thumb_set CEC_CAN_IRQHandler,Default_Handler - - .weak USB_IRQHandler - .thumb_set USB_IRQHandler,Default_Handler - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f078xx.s b/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f078xx.s deleted file mode 100644 index c7b54ba..0000000 --- a/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f078xx.s +++ /dev/null @@ -1,294 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32f078xx.s - * @author MCD Application Team - * @brief STM32F078xx devices vector table for GCC toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M0 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - - .syntax unified - .cpu cortex-m0 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - ldr r0, =_estack - mov sp, r0 /* set stack pointer */ - -/* Copy the data segment initializers from flash to SRAM */ - ldr r0, =_sdata - ldr r1, =_edata - ldr r2, =_sidata - movs r3, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r4, [r2, r3] - str r4, [r0, r3] - adds r3, r3, #4 - -LoopCopyDataInit: - adds r4, r0, r3 - cmp r4, r1 - bcc CopyDataInit - -/* Zero fill the bss segment. */ - ldr r2, =_sbss - ldr r4, =_ebss - movs r3, #0 - b LoopFillZerobss - -FillZerobss: - str r3, [r2] - adds r2, r2, #4 - -LoopFillZerobss: - cmp r2, r4 - bcc FillZerobss - -/* Call the clock system intitialization function.*/ - bl SystemInit -/* Call static constructors */ - bl __libc_init_array -/* Call the application's entry point.*/ - bl main - -LoopForever: - b LoopForever - - -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * - * @param None - * @retval : None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M0. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word 0 - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler /* Window WatchDog */ - .word VDDIO2_IRQHandler /* VDDIO2 Monitor through EXTI Line 31 */ - .word RTC_IRQHandler /* RTC through the EXTI line */ - .word FLASH_IRQHandler /* FLASH */ - .word RCC_CRS_IRQHandler /* RCC and CRS */ - .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */ - .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */ - .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */ - .word TSC_IRQHandler /* TSC */ - .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */ - .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */ - .word DMA1_Channel4_5_6_7_IRQHandler /* DMA1 Channel 4, Channel 5, Channel 6 and Channel 7*/ - .word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */ - .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */ - .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ - .word TIM2_IRQHandler /* TIM2 */ - .word TIM3_IRQHandler /* TIM3 */ - .word TIM6_DAC_IRQHandler /* TIM6 and DAC */ - .word TIM7_IRQHandler /* TIM7 */ - .word TIM14_IRQHandler /* TIM14 */ - .word TIM15_IRQHandler /* TIM15 */ - .word TIM16_IRQHandler /* TIM16 */ - .word TIM17_IRQHandler /* TIM17 */ - .word I2C1_IRQHandler /* I2C1 */ - .word I2C2_IRQHandler /* I2C2 */ - .word SPI1_IRQHandler /* SPI1 */ - .word SPI2_IRQHandler /* SPI2 */ - .word USART1_IRQHandler /* USART1 */ - .word USART2_IRQHandler /* USART2 */ - .word USART3_4_IRQHandler /* USART3 and USART4 */ - .word CEC_CAN_IRQHandler /* CEC and CAN */ - .word USB_IRQHandler /* USB */ - -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak VDDIO2_IRQHandler - .thumb_set VDDIO2_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_CRS_IRQHandler - .thumb_set RCC_CRS_IRQHandler,Default_Handler - - .weak EXTI0_1_IRQHandler - .thumb_set EXTI0_1_IRQHandler,Default_Handler - - .weak EXTI2_3_IRQHandler - .thumb_set EXTI2_3_IRQHandler,Default_Handler - - .weak EXTI4_15_IRQHandler - .thumb_set EXTI4_15_IRQHandler,Default_Handler - - .weak TSC_IRQHandler - .thumb_set TSC_IRQHandler,Default_Handler - - .weak DMA1_Channel1_IRQHandler - .thumb_set DMA1_Channel1_IRQHandler,Default_Handler - - .weak DMA1_Channel2_3_IRQHandler - .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler - - .weak DMA1_Channel4_5_6_7_IRQHandler - .thumb_set DMA1_Channel4_5_6_7_IRQHandler,Default_Handler - - .weak ADC1_COMP_IRQHandler - .thumb_set ADC1_COMP_IRQHandler,Default_Handler - - .weak TIM1_BRK_UP_TRG_COM_IRQHandler - .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM2_IRQHandler - .thumb_set TIM2_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak TIM6_DAC_IRQHandler - .thumb_set TIM6_DAC_IRQHandler,Default_Handler - - .weak TIM7_IRQHandler - .thumb_set TIM7_IRQHandler,Default_Handler - - .weak TIM14_IRQHandler - .thumb_set TIM14_IRQHandler,Default_Handler - - .weak TIM15_IRQHandler - .thumb_set TIM15_IRQHandler,Default_Handler - - .weak TIM16_IRQHandler - .thumb_set TIM16_IRQHandler,Default_Handler - - .weak TIM17_IRQHandler - .thumb_set TIM17_IRQHandler,Default_Handler - - .weak I2C1_IRQHandler - .thumb_set I2C1_IRQHandler,Default_Handler - - .weak I2C2_IRQHandler - .thumb_set I2C2_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak SPI2_IRQHandler - .thumb_set SPI2_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - - .weak USART3_4_IRQHandler - .thumb_set USART3_4_IRQHandler,Default_Handler - - .weak CEC_CAN_IRQHandler - .thumb_set CEC_CAN_IRQHandler,Default_Handler - - .weak USB_IRQHandler - .thumb_set USB_IRQHandler,Default_Handler - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f091xc.s b/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f091xc.s deleted file mode 100644 index 1e7d642..0000000 --- a/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f091xc.s +++ /dev/null @@ -1,290 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32f091xc.s - * @author MCD Application Team - * @brief STM32F091xC devices vector table for GCC toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M0 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - - .syntax unified - .cpu cortex-m0 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - ldr r0, =_estack - mov sp, r0 /* set stack pointer */ - -/* Copy the data segment initializers from flash to SRAM */ - ldr r0, =_sdata - ldr r1, =_edata - ldr r2, =_sidata - movs r3, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r4, [r2, r3] - str r4, [r0, r3] - adds r3, r3, #4 - -LoopCopyDataInit: - adds r4, r0, r3 - cmp r4, r1 - bcc CopyDataInit - -/* Zero fill the bss segment. */ - ldr r2, =_sbss - ldr r4, =_ebss - movs r3, #0 - b LoopFillZerobss - -FillZerobss: - str r3, [r2] - adds r2, r2, #4 - -LoopFillZerobss: - cmp r2, r4 - bcc FillZerobss - -/* Call the clock system intitialization function.*/ - bl SystemInit -/* Call static constructors */ - bl __libc_init_array -/* Call the application's entry point.*/ - bl main - -LoopForever: - b LoopForever - - -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * - * @param None - * @retval : None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M0. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word 0 - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler /* Window WatchDog */ - .word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */ - .word RTC_IRQHandler /* RTC through the EXTI line */ - .word FLASH_IRQHandler /* FLASH */ - .word RCC_CRS_IRQHandler /* RCC and CRS */ - .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */ - .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */ - .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */ - .word TSC_IRQHandler /* TSC */ - .word DMA1_Ch1_IRQHandler /* DMA1 Channel 1 */ - .word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */ - .word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */ - .word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */ - .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */ - .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ - .word TIM2_IRQHandler /* TIM2 */ - .word TIM3_IRQHandler /* TIM3 */ - .word TIM6_DAC_IRQHandler /* TIM6 and DAC */ - .word TIM7_IRQHandler /* TIM7 */ - .word TIM14_IRQHandler /* TIM14 */ - .word TIM15_IRQHandler /* TIM15 */ - .word TIM16_IRQHandler /* TIM16 */ - .word TIM17_IRQHandler /* TIM17 */ - .word I2C1_IRQHandler /* I2C1 */ - .word I2C2_IRQHandler /* I2C2 */ - .word SPI1_IRQHandler /* SPI1 */ - .word SPI2_IRQHandler /* SPI2 */ - .word USART1_IRQHandler /* USART1 */ - .word USART2_IRQHandler /* USART2 */ - .word USART3_8_IRQHandler /* USART3, USART4, USART5, USART6, USART7, USART8 */ - .word CEC_CAN_IRQHandler /* CEC and CAN */ - -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak PVD_VDDIO2_IRQHandler - .thumb_set PVD_VDDIO2_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_CRS_IRQHandler - .thumb_set RCC_CRS_IRQHandler,Default_Handler - - .weak EXTI0_1_IRQHandler - .thumb_set EXTI0_1_IRQHandler,Default_Handler - - .weak EXTI2_3_IRQHandler - .thumb_set EXTI2_3_IRQHandler,Default_Handler - - .weak EXTI4_15_IRQHandler - .thumb_set EXTI4_15_IRQHandler,Default_Handler - - .weak TSC_IRQHandler - .thumb_set TSC_IRQHandler,Default_Handler - - .weak DMA1_Ch1_IRQHandler - .thumb_set DMA1_Ch1_IRQHandler,Default_Handler - - .weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler - .thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler - - .weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler - .thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler - - .weak ADC1_COMP_IRQHandler - .thumb_set ADC1_COMP_IRQHandler,Default_Handler - - .weak TIM1_BRK_UP_TRG_COM_IRQHandler - .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM2_IRQHandler - .thumb_set TIM2_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak TIM6_DAC_IRQHandler - .thumb_set TIM6_DAC_IRQHandler,Default_Handler - - .weak TIM7_IRQHandler - .thumb_set TIM7_IRQHandler,Default_Handler - - .weak TIM14_IRQHandler - .thumb_set TIM14_IRQHandler,Default_Handler - - .weak TIM15_IRQHandler - .thumb_set TIM15_IRQHandler,Default_Handler - - .weak TIM16_IRQHandler - .thumb_set TIM16_IRQHandler,Default_Handler - - .weak TIM17_IRQHandler - .thumb_set TIM17_IRQHandler,Default_Handler - - .weak I2C1_IRQHandler - .thumb_set I2C1_IRQHandler,Default_Handler - - .weak I2C2_IRQHandler - .thumb_set I2C2_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak SPI2_IRQHandler - .thumb_set SPI2_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - - .weak USART3_8_IRQHandler - .thumb_set USART3_8_IRQHandler,Default_Handler - - .weak CEC_CAN_IRQHandler - .thumb_set CEC_CAN_IRQHandler,Default_Handler - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f098xx.s b/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f098xx.s deleted file mode 100644 index 5826c2f..0000000 --- a/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f098xx.s +++ /dev/null @@ -1,290 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32f098xx.s - * @author MCD Application Team - * @brief STM32F098xx devices vector table for GCC toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M0 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - - .syntax unified - .cpu cortex-m0 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - ldr r0, =_estack - mov sp, r0 /* set stack pointer */ - -/* Copy the data segment initializers from flash to SRAM */ - ldr r0, =_sdata - ldr r1, =_edata - ldr r2, =_sidata - movs r3, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r4, [r2, r3] - str r4, [r0, r3] - adds r3, r3, #4 - -LoopCopyDataInit: - adds r4, r0, r3 - cmp r4, r1 - bcc CopyDataInit - -/* Zero fill the bss segment. */ - ldr r2, =_sbss - ldr r4, =_ebss - movs r3, #0 - b LoopFillZerobss - -FillZerobss: - str r3, [r2] - adds r2, r2, #4 - -LoopFillZerobss: - cmp r2, r4 - bcc FillZerobss - -/* Call the clock system intitialization function.*/ - bl SystemInit -/* Call static constructors */ - bl __libc_init_array -/* Call the application's entry point.*/ - bl main - -LoopForever: - b LoopForever - - -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * - * @param None - * @retval : None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M0. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word 0 - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler /* Window WatchDog */ - .word VDDIO2_IRQHandler /* VDDIO2 Monitor through EXTI Line 31 */ - .word RTC_IRQHandler /* RTC through the EXTI line */ - .word FLASH_IRQHandler /* FLASH */ - .word RCC_CRS_IRQHandler /* RCC and CRS */ - .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */ - .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */ - .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */ - .word TSC_IRQHandler /* TSC */ - .word DMA1_Ch1_IRQHandler /* DMA1 Channel 1 */ - .word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */ - .word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */ - .word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */ - .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */ - .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ - .word TIM2_IRQHandler /* TIM2 */ - .word TIM3_IRQHandler /* TIM3 */ - .word TIM6_DAC_IRQHandler /* TIM6 and DAC */ - .word TIM7_IRQHandler /* TIM7 */ - .word TIM14_IRQHandler /* TIM14 */ - .word TIM15_IRQHandler /* TIM15 */ - .word TIM16_IRQHandler /* TIM16 */ - .word TIM17_IRQHandler /* TIM17 */ - .word I2C1_IRQHandler /* I2C1 */ - .word I2C2_IRQHandler /* I2C2 */ - .word SPI1_IRQHandler /* SPI1 */ - .word SPI2_IRQHandler /* SPI2 */ - .word USART1_IRQHandler /* USART1 */ - .word USART2_IRQHandler /* USART2 */ - .word USART3_8_IRQHandler /* USART3, USART4, USART5, USART6, USART7, USART8 */ - .word CEC_CAN_IRQHandler /* CEC and CAN */ - -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak VDDIO2_IRQHandler - .thumb_set VDDIO2_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_CRS_IRQHandler - .thumb_set RCC_CRS_IRQHandler,Default_Handler - - .weak EXTI0_1_IRQHandler - .thumb_set EXTI0_1_IRQHandler,Default_Handler - - .weak EXTI2_3_IRQHandler - .thumb_set EXTI2_3_IRQHandler,Default_Handler - - .weak EXTI4_15_IRQHandler - .thumb_set EXTI4_15_IRQHandler,Default_Handler - - .weak TSC_IRQHandler - .thumb_set TSC_IRQHandler,Default_Handler - - .weak DMA1_Ch1_IRQHandler - .thumb_set DMA1_Ch1_IRQHandler,Default_Handler - - .weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler - .thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler - - .weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler - .thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler - - .weak ADC1_COMP_IRQHandler - .thumb_set ADC1_COMP_IRQHandler,Default_Handler - - .weak TIM1_BRK_UP_TRG_COM_IRQHandler - .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM2_IRQHandler - .thumb_set TIM2_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak TIM6_DAC_IRQHandler - .thumb_set TIM6_DAC_IRQHandler,Default_Handler - - .weak TIM7_IRQHandler - .thumb_set TIM7_IRQHandler,Default_Handler - - .weak TIM14_IRQHandler - .thumb_set TIM14_IRQHandler,Default_Handler - - .weak TIM15_IRQHandler - .thumb_set TIM15_IRQHandler,Default_Handler - - .weak TIM16_IRQHandler - .thumb_set TIM16_IRQHandler,Default_Handler - - .weak TIM17_IRQHandler - .thumb_set TIM17_IRQHandler,Default_Handler - - .weak I2C1_IRQHandler - .thumb_set I2C1_IRQHandler,Default_Handler - - .weak I2C2_IRQHandler - .thumb_set I2C2_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak SPI2_IRQHandler - .thumb_set SPI2_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - - .weak USART3_8_IRQHandler - .thumb_set USART3_8_IRQHandler,Default_Handler - - .weak CEC_CAN_IRQHandler - .thumb_set CEC_CAN_IRQHandler,Default_Handler - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - -- cgit