From 6ab94e0b318884bbcb95e2ea3835f951502e1d99 Mon Sep 17 00:00:00 2001 From: jaseg Date: Wed, 14 Oct 2020 12:47:28 +0200 Subject: Move firmware into subdirectory --- .../Device/ST/STM32F0xx/Include/stm32f038xx.h | 5650 ++++++++++++++++++++ 1 file changed, 5650 insertions(+) create mode 100644 fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f038xx.h (limited to 'fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f038xx.h') diff --git a/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f038xx.h b/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f038xx.h new file mode 100644 index 0000000..be1ce07 --- /dev/null +++ b/fw/cdc-dials/Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f038xx.h @@ -0,0 +1,5650 @@ +/** + ****************************************************************************** + * @file stm32f038xx.h + * @author MCD Application Team + * @brief CMSIS Cortex-M0 Device Peripheral Access Layer Header File. + * This file contains all the peripheral register's definitions, bits + * definitions and memory mapping for STM32F0xx devices. + * + * This file contains: + * - Data structures and the address mapping for all peripherals + * - Peripheral's registers declarations and bits definition + * - Macros to access peripheral’s registers hardware + * + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f038xx + * @{ + */ + +#ifndef __STM32F038xx_H +#define __STM32F038xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + + /** @addtogroup Configuration_section_for_CMSIS + * @{ + */ +/** + * @brief Configuration of the Cortex-M0 Processor and Core Peripherals + */ +#define __CM0_REV 0 /*!< Core Revision r0p0 */ +#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */ +#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief STM32F0xx Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ + + /*!< Interrupt Number Definition */ +typedef enum +{ +/****** Cortex-M0 Processor Exceptions Numbers **************************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */ + SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */ + +/****** STM32F0 specific Interrupt Numbers ******************************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */ + FLASH_IRQn = 3, /*!< FLASH global Interrupt */ + RCC_IRQn = 4, /*!< RCC global Interrupt */ + EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupt */ + EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupt */ + EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupt */ + DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupt */ + DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4 and Channel 5 Interrupt */ + ADC1_IRQn = 12, /*!< ADC1 Interrupt */ + TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 15, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 16, /*!< TIM3 global Interrupt */ + TIM14_IRQn = 19, /*!< TIM14 global Interrupt */ + TIM16_IRQn = 21, /*!< TIM16 global Interrupt */ + TIM17_IRQn = 22, /*!< TIM17 global Interrupt */ + I2C1_IRQn = 23, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */ + SPI1_IRQn = 25, /*!< SPI1 global Interrupt */ + USART1_IRQn = 27 /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */ +#include "system_stm32f0xx.h" /* STM32F0xx System Header */ +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */ + __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */ + __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */ + __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */ + uint32_t RESERVED1; /*!< Reserved, 0x18 */ + uint32_t RESERVED2; /*!< Reserved, 0x1C */ + __IO uint32_t TR; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */ + uint32_t RESERVED3; /*!< Reserved, 0x24 */ + __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */ + uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */ + __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */ +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */ +} ADC_Common_TypeDef; + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + uint8_t RESERVED0; /*!< Reserved, 0x05 */ + uint16_t RESERVED1; /*!< Reserved, 0x06 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED2; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t RESERVED3; /*!< Reserved, 0x14 */ +} CRC_TypeDef; + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ + __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */ + __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */ +}DBGMCU_TypeDef; + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CCR; /*!< DMA channel x configuration register */ + __IO uint32_t CNDTR; /*!< DMA channel x number of data register */ + __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */ + __IO uint32_t CMAR; /*!< DMA channel x memory address register */ +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ +} DMA_TypeDef; + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR; /*!