From 6ab94e0b318884bbcb95e2ea3835f951502e1d99 Mon Sep 17 00:00:00 2001 From: jaseg Date: Wed, 14 Oct 2020 12:47:28 +0200 Subject: Move firmware into subdirectory --- .../DSP/Source/SupportFunctions/arm_q31_to_q15.c | 133 +++++++++++++++++++++ 1 file changed, 133 insertions(+) create mode 100644 fw/cdc-dials/Drivers/CMSIS/DSP/Source/SupportFunctions/arm_q31_to_q15.c (limited to 'fw/cdc-dials/Drivers/CMSIS/DSP/Source/SupportFunctions/arm_q31_to_q15.c') diff --git a/fw/cdc-dials/Drivers/CMSIS/DSP/Source/SupportFunctions/arm_q31_to_q15.c b/fw/cdc-dials/Drivers/CMSIS/DSP/Source/SupportFunctions/arm_q31_to_q15.c new file mode 100644 index 0000000..2fd305b --- /dev/null +++ b/fw/cdc-dials/Drivers/CMSIS/DSP/Source/SupportFunctions/arm_q31_to_q15.c @@ -0,0 +1,133 @@ +/* ---------------------------------------------------------------------- + * Project: CMSIS DSP Library + * Title: arm_q31_to_q15.c + * Description: Converts the elements of the Q31 vector to Q15 vector + * + * $Date: 27. January 2017 + * $Revision: V.1.5.1 + * + * Target Processor: Cortex-M cores + * -------------------------------------------------------------------- */ +/* + * Copyright (C) 2010-2017 ARM Limited or its affiliates. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#include "arm_math.h" + +/** + * @ingroup groupSupport + */ + +/** + * @addtogroup q31_to_x + * @{ + */ + +/** + * @brief Converts the elements of the Q31 vector to Q15 vector. + * @param[in] *pSrc points to the Q31 input vector + * @param[out] *pDst points to the Q15 output vector + * @param[in] blockSize length of the input vector + * @return none. + * + * \par Description: + * + * The equation used for the conversion process is: + * + *
+ * 	pDst[n] = (q15_t) pSrc[n] >> 16;   0 <= n < blockSize.
+ * 
+ * + */ + + +void arm_q31_to_q15( + q31_t * pSrc, + q15_t * pDst, + uint32_t blockSize) +{ + q31_t *pIn = pSrc; /* Src pointer */ + uint32_t blkCnt; /* loop counter */ + +#if defined (ARM_MATH_DSP) + + /* Run the below code for Cortex-M4 and Cortex-M3 */ + q31_t in1, in2, in3, in4; + q31_t out1, out2; + + /*loop Unrolling */ + blkCnt = blockSize >> 2U; + + /* First part of the processing with loop unrolling. Compute 4 outputs at a time. + ** a second loop below computes the remaining 1 to 3 samples. */ + while (blkCnt > 0U) + { + /* C = (q15_t) A >> 16 */ + /* convert from q31 to q15 and then store the results in the destination buffer */ + in1 = *pIn++; + in2 = *pIn++; + in3 = *pIn++; + in4 = *pIn++; + + /* pack two higher 16-bit values from two 32-bit values */ +#ifndef ARM_MATH_BIG_ENDIAN + + out1 = __PKHTB(in2, in1, 16); + out2 = __PKHTB(in4, in3, 16); + +#else + + out1 = __PKHTB(in1, in2, 16); + out2 = __PKHTB(in3, in4, 16); + +#endif // #ifdef ARM_MATH_BIG_ENDIAN + + *__SIMD32(pDst)++ = out1; + *__SIMD32(pDst)++ = out2; + + /* Decrement the loop counter */ + blkCnt--; + } + + /* If the blockSize is not a multiple of 4, compute any remaining output samples here. + ** No loop unrolling is used. */ + blkCnt = blockSize % 0x4U; + +#else + + /* Run the below code for Cortex-M0 */ + + /* Loop over blockSize number of values */ + blkCnt = blockSize; + +#endif /* #if defined (ARM_MATH_DSP) */ + + while (blkCnt > 0U) + { + /* C = (q15_t) A >> 16 */ + /* convert from q31 to q15 and then store the results in the destination buffer */ + *pDst++ = (q15_t) (*pIn++ >> 16); + + /* Decrement the loop counter */ + blkCnt--; + } + +} + +/** + * @} end of q31_to_x group + */ -- cgit