From 6ab94e0b318884bbcb95e2ea3835f951502e1d99 Mon Sep 17 00:00:00 2001
From: jaseg <git@jaseg.net>
Date: Wed, 14 Oct 2020 12:47:28 +0200
Subject: Move firmware into subdirectory

---
 .../DSP/Source/SupportFunctions/arm_q15_to_q31.c   | 144 +++++++++++++++++++++
 1 file changed, 144 insertions(+)
 create mode 100644 fw/cdc-dials/Drivers/CMSIS/DSP/Source/SupportFunctions/arm_q15_to_q31.c

(limited to 'fw/cdc-dials/Drivers/CMSIS/DSP/Source/SupportFunctions/arm_q15_to_q31.c')

diff --git a/fw/cdc-dials/Drivers/CMSIS/DSP/Source/SupportFunctions/arm_q15_to_q31.c b/fw/cdc-dials/Drivers/CMSIS/DSP/Source/SupportFunctions/arm_q15_to_q31.c
new file mode 100644
index 0000000..2dff322
--- /dev/null
+++ b/fw/cdc-dials/Drivers/CMSIS/DSP/Source/SupportFunctions/arm_q15_to_q31.c
@@ -0,0 +1,144 @@
+/* ----------------------------------------------------------------------
+ * Project:      CMSIS DSP Library
+ * Title:        arm_q15_to_q31.c
+ * Description:  Converts the elements of the Q15 vector to Q31 vector
+ *
+ * $Date:        27. January 2017
+ * $Revision:    V.1.5.1
+ *
+ * Target Processor: Cortex-M cores
+ * -------------------------------------------------------------------- */
+/*
+ * Copyright (C) 2010-2017 ARM Limited or its affiliates. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "arm_math.h"
+
+/**
+ * @ingroup groupSupport
+ */
+
+/**
+ * @addtogroup q15_to_x
+ * @{
+ */
+
+/**
+ * @brief Converts the elements of the Q15 vector to Q31 vector.
+ * @param[in]       *pSrc points to the Q15 input vector
+ * @param[out]      *pDst points to the Q31 output vector
+ * @param[in]       blockSize length of the input vector
+ * @return none.
+ *
+ * \par Description:
+ *
+ * The equation used for the conversion process is:
+ *
+ * <pre>
+ * 	pDst[n] = (q31_t) pSrc[n] << 16;   0 <= n < blockSize.
+ * </pre>
+ *
+ */
+
+
+void arm_q15_to_q31(
+  q15_t * pSrc,
+  q31_t * pDst,
+  uint32_t blockSize)
+{
+  q15_t *pIn = pSrc;                             /* Src pointer */
+  uint32_t blkCnt;                               /* loop counter */
+
+#if defined (ARM_MATH_DSP)
+
+  /* Run the below code for Cortex-M4 and Cortex-M3 */
+  q31_t in1, in2;
+  q31_t out1, out2, out3, out4;
+
+  /*loop Unrolling */
+  blkCnt = blockSize >> 2U;
+
+  /* First part of the processing with loop unrolling.  Compute 4 outputs at a time.
+   ** a second loop below computes the remaining 1 to 3 samples. */
+  while (blkCnt > 0U)
+  {
+    /* C = (q31_t)A << 16 */
+    /* convert from q15 to q31 and then store the results in the destination buffer */
+    in1 = *__SIMD32(pIn)++;
+    in2 = *__SIMD32(pIn)++;
+
+#ifndef ARM_MATH_BIG_ENDIAN
+
+    /* extract lower 16 bits to 32 bit result */
+    out1 = in1 << 16U;
+    /* extract upper 16 bits to 32 bit result */
+    out2 = in1 & 0xFFFF0000;
+    /* extract lower 16 bits to 32 bit result */
+    out3 = in2 << 16U;
+    /* extract upper 16 bits to 32 bit result */
+    out4 = in2 & 0xFFFF0000;
+
+#else
+
+    /* extract upper 16 bits to 32 bit result */
+    out1 = in1 & 0xFFFF0000;
+    /* extract lower 16 bits to 32 bit result */
+    out2 = in1 << 16U;
+    /* extract upper 16 bits to 32 bit result */
+    out3 = in2 & 0xFFFF0000;
+    /* extract lower 16 bits to 32 bit result */
+    out4 = in2 << 16U;
+
+#endif //      #ifndef ARM_MATH_BIG_ENDIAN
+
+    *pDst++ = out1;
+    *pDst++ = out2;
+    *pDst++ = out3;
+    *pDst++ = out4;
+
+    /* Decrement the loop counter */
+    blkCnt--;
+  }
+
+  /* If the blockSize is not a multiple of 4, compute any remaining output samples here.
+   ** No loop unrolling is used. */
+  blkCnt = blockSize % 0x4U;
+
+#else
+
+  /* Run the below code for Cortex-M0 */
+
+  /* Loop over blockSize number of values */
+  blkCnt = blockSize;
+
+#endif /* #if defined (ARM_MATH_DSP) */
+
+  while (blkCnt > 0U)
+  {
+    /* C = (q31_t)A << 16 */
+    /* convert from q15 to q31 and then store the results in the destination buffer */
+    *pDst++ = (q31_t) * pIn++ << 16;
+
+    /* Decrement the loop counter */
+    blkCnt--;
+  }
+
+}
+
+/**
+ * @} end of q15_to_x group
+ */
-- 
cgit