From 6ab94e0b318884bbcb95e2ea3835f951502e1d99 Mon Sep 17 00:00:00 2001
From: jaseg <git@jaseg.net>
Date: Wed, 14 Oct 2020 12:47:28 +0200
Subject: Move firmware into subdirectory

---
 .../Source/ControllerFunctions/arm_pid_init_q15.c  | 110 +++++++++++++++++++++
 1 file changed, 110 insertions(+)
 create mode 100644 fw/cdc-dials/Drivers/CMSIS/DSP/Source/ControllerFunctions/arm_pid_init_q15.c

(limited to 'fw/cdc-dials/Drivers/CMSIS/DSP/Source/ControllerFunctions/arm_pid_init_q15.c')

diff --git a/fw/cdc-dials/Drivers/CMSIS/DSP/Source/ControllerFunctions/arm_pid_init_q15.c b/fw/cdc-dials/Drivers/CMSIS/DSP/Source/ControllerFunctions/arm_pid_init_q15.c
new file mode 100644
index 0000000..0f83f35
--- /dev/null
+++ b/fw/cdc-dials/Drivers/CMSIS/DSP/Source/ControllerFunctions/arm_pid_init_q15.c
@@ -0,0 +1,110 @@
+/* ----------------------------------------------------------------------
+ * Project:      CMSIS DSP Library
+ * Title:        arm_pid_init_q15.c
+ * Description:  Q15 PID Control initialization function
+ *
+ * $Date:        27. January 2017
+ * $Revision:    V.1.5.1
+ *
+ * Target Processor: Cortex-M cores
+ * -------------------------------------------------------------------- */
+/*
+ * Copyright (C) 2010-2017 ARM Limited or its affiliates. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "arm_math.h"
+
+ /**
+ * @addtogroup PID
+ * @{
+ */
+
+/**
+ * @details
+ * @param[in,out] *S points to an instance of the Q15 PID structure.
+ * @param[in]     resetStateFlag  flag to reset the state. 0 = no change in state 1 = reset the state.
+ * @return none.
+ * \par Description:
+ * \par
+ * The <code>resetStateFlag</code> specifies whether to set state to zero or not. \n
+ * The function computes the structure fields: <code>A0</code>, <code>A1</code> <code>A2</code>
+ * using the proportional gain( \c Kp), integral gain( \c Ki) and derivative gain( \c Kd)
+ * also sets the state variables to all zeros.
+ */
+
+void arm_pid_init_q15(
+  arm_pid_instance_q15 * S,
+  int32_t resetStateFlag)
+{
+
+#if defined (ARM_MATH_DSP)
+
+  /* Run the below code for Cortex-M4 and Cortex-M3 */
+
+  /* Derived coefficient A0 */
+  S->A0 = __QADD16(__QADD16(S->Kp, S->Ki), S->Kd);
+
+  /* Derived coefficients and pack into A1 */
+
+#ifndef  ARM_MATH_BIG_ENDIAN
+
+  S->A1 = __PKHBT(-__QADD16(__QADD16(S->Kd, S->Kd), S->Kp), S->Kd, 16);
+
+#else
+
+  S->A1 = __PKHBT(S->Kd, -__QADD16(__QADD16(S->Kd, S->Kd), S->Kp), 16);
+
+#endif /*      #ifndef  ARM_MATH_BIG_ENDIAN    */
+
+  /* Check whether state needs reset or not */
+  if (resetStateFlag)
+  {
+    /* Clear the state buffer.  The size will be always 3 samples */
+    memset(S->state, 0, 3U * sizeof(q15_t));
+  }
+
+#else
+
+  /* Run the below code for Cortex-M0 */
+
+  q31_t temp;                                    /*to store the sum */
+
+  /* Derived coefficient A0 */
+  temp = S->Kp + S->Ki + S->Kd;
+  S->A0 = (q15_t) __SSAT(temp, 16);
+
+  /* Derived coefficients and pack into A1 */
+  temp = -(S->Kd + S->Kd + S->Kp);
+  S->A1 = (q15_t) __SSAT(temp, 16);
+  S->A2 = S->Kd;
+
+
+
+  /* Check whether state needs reset or not */
+  if (resetStateFlag)
+  {
+    /* Clear the state buffer.  The size will be always 3 samples */
+    memset(S->state, 0, 3U * sizeof(q15_t));
+  }
+
+#endif /* #if defined (ARM_MATH_DSP) */
+
+}
+
+/**
+ * @} end of PID group
+ */
-- 
cgit