From 6ab94e0b318884bbcb95e2ea3835f951502e1d99 Mon Sep 17 00:00:00 2001
From: jaseg <git@jaseg.net>
Date: Wed, 14 Oct 2020 12:47:28 +0200
Subject: Move firmware into subdirectory

---
 .../DSP/Source/BasicMathFunctions/arm_negate_q7.c  | 113 +++++++++++++++++++++
 1 file changed, 113 insertions(+)
 create mode 100644 fw/cdc-dials/Drivers/CMSIS/DSP/Source/BasicMathFunctions/arm_negate_q7.c

(limited to 'fw/cdc-dials/Drivers/CMSIS/DSP/Source/BasicMathFunctions/arm_negate_q7.c')

diff --git a/fw/cdc-dials/Drivers/CMSIS/DSP/Source/BasicMathFunctions/arm_negate_q7.c b/fw/cdc-dials/Drivers/CMSIS/DSP/Source/BasicMathFunctions/arm_negate_q7.c
new file mode 100644
index 0000000..b225c5e
--- /dev/null
+++ b/fw/cdc-dials/Drivers/CMSIS/DSP/Source/BasicMathFunctions/arm_negate_q7.c
@@ -0,0 +1,113 @@
+/* ----------------------------------------------------------------------
+ * Project:      CMSIS DSP Library
+ * Title:        arm_negate_q7.c
+ * Description:  Negates Q7 vectors
+ *
+ * $Date:        27. January 2017
+ * $Revision:    V.1.5.1
+ *
+ * Target Processor: Cortex-M cores
+ * -------------------------------------------------------------------- */
+/*
+ * Copyright (C) 2010-2017 ARM Limited or its affiliates. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "arm_math.h"
+
+/**
+ * @ingroup groupMath
+ */
+
+/**
+ * @addtogroup negate
+ * @{
+ */
+
+/**
+ * @brief  Negates the elements of a Q7 vector.
+ * @param[in]  *pSrc points to the input vector
+ * @param[out]  *pDst points to the output vector
+ * @param[in]  blockSize number of samples in the vector
+ * @return none.
+ *
+ * <b>Scaling and Overflow Behavior:</b>
+ * \par
+ * The function uses saturating arithmetic.
+ * The Q7 value -1 (0x80) will be saturated to the maximum allowable positive value 0x7F.
+ */
+
+void arm_negate_q7(
+  q7_t * pSrc,
+  q7_t * pDst,
+  uint32_t blockSize)
+{
+  uint32_t blkCnt;                               /* loop counter */
+  q7_t in;
+
+#if defined (ARM_MATH_DSP)
+
+/* Run the below code for Cortex-M4 and Cortex-M3 */
+  q31_t input;                                   /* Input values1-4 */
+  q31_t zero = 0x00000000;
+
+
+  /*loop Unrolling */
+  blkCnt = blockSize >> 2U;
+
+  /* First part of the processing with loop unrolling.  Compute 4 outputs at a time.
+   ** a second loop below computes the remaining 1 to 3 samples. */
+  while (blkCnt > 0U)
+  {
+    /* C = -A */
+    /* Read four inputs */
+    input = *__SIMD32(pSrc)++;
+
+    /* Store the Negated results in the destination buffer in a single cycle by packing the results */
+    *__SIMD32(pDst)++ = __QSUB8(zero, input);
+
+    /* Decrement the loop counter */
+    blkCnt--;
+  }
+
+  /* If the blockSize is not a multiple of 4, compute any remaining output samples here.
+   ** No loop unrolling is used. */
+  blkCnt = blockSize % 0x4U;
+
+#else
+
+  /* Run the below code for Cortex-M0 */
+
+  /* Initialize blkCnt with number of samples */
+  blkCnt = blockSize;
+
+#endif /* #if defined (ARM_MATH_DSP) */
+
+  while (blkCnt > 0U)
+  {
+    /* C = -A */
+    /* Negate and then store the results in the destination buffer. */ \
+      in = *pSrc++;
+    *pDst++ = (in == (q7_t) 0x80) ? 0x7f : -in;
+
+    /* Decrement the loop counter */
+    blkCnt--;
+  }
+}
+
+/**
+ * @} end of negate group
+ */
-- 
cgit