From 6ab94e0b318884bbcb95e2ea3835f951502e1d99 Mon Sep 17 00:00:00 2001
From: jaseg <git@jaseg.net>
Date: Wed, 14 Oct 2020 12:47:28 +0200
Subject: Move firmware into subdirectory

---
 .../DSP/Source/BasicMathFunctions/arm_mult_f32.c   | 162 +++++++++++++++++++++
 1 file changed, 162 insertions(+)
 create mode 100644 fw/cdc-dials/Drivers/CMSIS/DSP/Source/BasicMathFunctions/arm_mult_f32.c

(limited to 'fw/cdc-dials/Drivers/CMSIS/DSP/Source/BasicMathFunctions/arm_mult_f32.c')

diff --git a/fw/cdc-dials/Drivers/CMSIS/DSP/Source/BasicMathFunctions/arm_mult_f32.c b/fw/cdc-dials/Drivers/CMSIS/DSP/Source/BasicMathFunctions/arm_mult_f32.c
new file mode 100644
index 0000000..334e32b
--- /dev/null
+++ b/fw/cdc-dials/Drivers/CMSIS/DSP/Source/BasicMathFunctions/arm_mult_f32.c
@@ -0,0 +1,162 @@
+/* ----------------------------------------------------------------------
+ * Project:      CMSIS DSP Library
+ * Title:        arm_mult_f32.c
+ * Description:  Floating-point vector multiplication
+ *
+ * $Date:        27. January 2017
+ * $Revision:    V.1.5.1
+ *
+ * Target Processor: Cortex-M cores
+ * -------------------------------------------------------------------- */
+/*
+ * Copyright (C) 2010-2017 ARM Limited or its affiliates. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "arm_math.h"
+
+/**
+ * @ingroup groupMath
+ */
+
+/**
+ * @defgroup BasicMult Vector Multiplication
+ *
+ * Element-by-element multiplication of two vectors.
+ *
+ * <pre>
+ *     pDst[n] = pSrcA[n] * pSrcB[n],   0 <= n < blockSize.
+ * </pre>
+ *
+ * There are separate functions for floating-point, Q7, Q15, and Q31 data types.
+ */
+
+/**
+ * @addtogroup BasicMult
+ * @{
+ */
+
+/**
+ * @brief Floating-point vector multiplication.
+ * @param[in]       *pSrcA points to the first input vector
+ * @param[in]       *pSrcB points to the second input vector
+ * @param[out]      *pDst points to the output vector
+ * @param[in]       blockSize number of samples in each vector
+ * @return none.
+ */
+
+void arm_mult_f32(
+  float32_t * pSrcA,
+  float32_t * pSrcB,
+  float32_t * pDst,
+  uint32_t blockSize)
+{
+  uint32_t blkCnt;                               /* loop counters */
+#if defined (ARM_MATH_DSP)
+
+  /* Run the below code for Cortex-M4 and Cortex-M3 */
+  float32_t inA1, inA2, inA3, inA4;              /* temporary input variables */
+  float32_t inB1, inB2, inB3, inB4;              /* temporary input variables */
+  float32_t out1, out2, out3, out4;              /* temporary output variables */
+
+  /* loop Unrolling */
+  blkCnt = blockSize >> 2U;
+
+  /* First part of the processing with loop unrolling.  Compute 4 outputs at a time.
+   ** a second loop below computes the remaining 1 to 3 samples. */
+  while (blkCnt > 0U)
+  {
+    /* C = A * B */
+    /* Multiply the inputs and store the results in output buffer */
+    /* read sample from sourceA */
+    inA1 = *pSrcA;
+    /* read sample from sourceB */
+    inB1 = *pSrcB;
+    /* read sample from sourceA */
+    inA2 = *(pSrcA + 1);
+    /* read sample from sourceB */
+    inB2 = *(pSrcB + 1);
+
+    /* out = sourceA * sourceB */
+    out1 = inA1 * inB1;
+
+    /* read sample from sourceA */
+    inA3 = *(pSrcA + 2);
+    /* read sample from sourceB */
+    inB3 = *(pSrcB + 2);
+
+    /* out = sourceA * sourceB */
+    out2 = inA2 * inB2;
+
+    /* read sample from sourceA */
+    inA4 = *(pSrcA + 3);
+
+    /* store result to destination buffer */
+    *pDst = out1;
+
+    /* read sample from sourceB */
+    inB4 = *(pSrcB + 3);
+
+    /* out = sourceA * sourceB */
+    out3 = inA3 * inB3;
+
+    /* store result to destination buffer */
+    *(pDst + 1) = out2;
+
+    /* out = sourceA * sourceB */
+    out4 = inA4 * inB4;
+    /* store result to destination buffer */
+    *(pDst + 2) = out3;
+    /* store result to destination buffer */
+    *(pDst + 3) = out4;
+
+
+    /* update pointers to process next samples */
+    pSrcA += 4U;
+    pSrcB += 4U;
+    pDst += 4U;
+
+    /* Decrement the blockSize loop counter */
+    blkCnt--;
+  }
+
+  /* If the blockSize is not a multiple of 4, compute any remaining output samples here.
+   ** No loop unrolling is used. */
+  blkCnt = blockSize % 0x4U;
+
+#else
+
+  /* Run the below code for Cortex-M0 */
+
+  /* Initialize blkCnt with number of samples */
+  blkCnt = blockSize;
+
+#endif /* #if defined (ARM_MATH_DSP) */
+
+  while (blkCnt > 0U)
+  {
+    /* C = A * B */
+    /* Multiply the inputs and store the results in output buffer */
+    *pDst++ = (*pSrcA++) * (*pSrcB++);
+
+    /* Decrement the blockSize loop counter */
+    blkCnt--;
+  }
+}
+
+/**
+ * @} end of BasicMult group
+ */
-- 
cgit