From 7b85ba8d4fb34e76d34a2d581e89e856aa471cf5 Mon Sep 17 00:00:00 2001 From: jaseg Date: Mon, 21 Dec 2020 16:26:57 +0100 Subject: Move fw into direct subdir --- .../STM32_USB_Device_Library/Core/Inc/usbd_core.h | 167 +++++ .../Core/Inc/usbd_ctlreq.h | 113 +++ .../STM32_USB_Device_Library/Core/Inc/usbd_def.h | 330 +++++++++ .../STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h | 128 ++++ .../STM32_USB_Device_Library/Core/Src/usbd_core.c | 565 +++++++++++++++ .../Core/Src/usbd_ctlreq.c | 782 +++++++++++++++++++++ .../STM32_USB_Device_Library/Core/Src/usbd_ioreq.c | 236 +++++++ 7 files changed, 2321 insertions(+) create mode 100644 fw/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h create mode 100644 fw/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h create mode 100644 fw/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h create mode 100644 fw/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h create mode 100644 fw/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c create mode 100644 fw/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c create mode 100644 fw/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c (limited to 'fw/Middlewares/ST') diff --git a/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h b/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h new file mode 100644 index 0000000..6550cd7 --- /dev/null +++ b/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h @@ -0,0 +1,167 @@ +/** + ****************************************************************************** + * @file usbd_core.h + * @author MCD Application Team + * @version V2.4.2 + * @date 11-December-2015 + * @brief Header file for usbd_core.c file + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2015 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USBD_CORE_H +#define __USBD_CORE_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_conf.h" +#include "usbd_def.h" +#include "usbd_ioreq.h" +#include "usbd_ctlreq.h" + +/** @addtogroup STM32_USB_DEVICE_LIBRARY + * @{ + */ + +/** @defgroup USBD_CORE + * @brief This file is the Header file for usbd_core.c file + * @{ + */ + + +/** @defgroup USBD_CORE_Exported_Defines + * @{ + */ + +/** + * @} + */ + + +/** @defgroup USBD_CORE_Exported_TypesDefinitions + * @{ + */ + + +/** + * @} + */ + + + +/** @defgroup USBD_CORE_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup USBD_CORE_Exported_Variables + * @{ + */ +#define USBD_SOF USBD_LL_SOF +/** + * @} + */ + +/** @defgroup USBD_CORE_Exported_FunctionsPrototype + * @{ + */ +USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev, USBD_DescriptorsTypeDef *pdesc, uint8_t id); +USBD_StatusTypeDef USBD_DeInit(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_Start (USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_Stop (USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, USBD_ClassTypeDef *pclass); + +USBD_StatusTypeDef USBD_RunTestMode (USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx); +USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx); + +USBD_StatusTypeDef USBD_LL_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup); +USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata); +USBD_StatusTypeDef USBD_LL_DataInStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata); + +USBD_StatusTypeDef USBD_LL_Reset(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_SetSpeed(USBD_HandleTypeDef *pdev, USBD_SpeedTypeDef speed); +USBD_StatusTypeDef USBD_LL_Suspend(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_Resume(USBD_HandleTypeDef *pdev); + +USBD_StatusTypeDef USBD_LL_SOF(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_IsoINIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum); +USBD_StatusTypeDef USBD_LL_IsoOUTIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum); + +USBD_StatusTypeDef USBD_LL_DevConnected(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_DevDisconnected(USBD_HandleTypeDef *pdev); + +/* USBD Low Level Driver */ +USBD_StatusTypeDef USBD_LL_Init (USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_DeInit (USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_Stop (USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_OpenEP (USBD_HandleTypeDef *pdev, + uint8_t ep_addr, + uint8_t ep_type, + uint16_t ep_mps); + +USBD_StatusTypeDef USBD_LL_CloseEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr); +USBD_StatusTypeDef USBD_LL_FlushEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr); +USBD_StatusTypeDef USBD_LL_StallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr); +USBD_StatusTypeDef USBD_LL_ClearStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr); +uint8_t USBD_LL_IsStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr); +USBD_StatusTypeDef USBD_LL_SetUSBAddress (USBD_HandleTypeDef *pdev, uint8_t dev_addr); +USBD_StatusTypeDef USBD_LL_Transmit (USBD_HandleTypeDef *pdev, + uint8_t ep_addr, + uint8_t *pbuf, + uint16_t size); + +USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev, + uint8_t ep_addr, + uint8_t *pbuf, + uint16_t size); + +uint32_t USBD_LL_GetRxDataSize (USBD_HandleTypeDef *pdev, uint8_t ep_addr); +void USBD_LL_Delay (uint32_t Delay); + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USBD_CORE_H */ + +/** + * @} + */ + +/** +* @} +*/ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + + + diff --git a/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h b/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h new file mode 100644 index 0000000..66380fd --- /dev/null +++ b/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h @@ -0,0 +1,113 @@ +/** + ****************************************************************************** + * @file usbd_req.h + * @author MCD Application Team + * @version V2.4.2 + * @date 11-December-2015 + * @brief Header file for the usbd_req.c file + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2015 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USB_REQUEST_H +#define __USB_REQUEST_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_def.h" + + +/** @addtogroup STM32_USB_DEVICE_LIBRARY + * @{ + */ + +/** @defgroup USBD_REQ + * @brief header file for the usbd_req.c file + * @{ + */ + +/** @defgroup USBD_REQ_Exported_Defines + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_REQ_Exported_Types + * @{ + */ +/** + * @} + */ + + + +/** @defgroup USBD_REQ_Exported_Macros + * @{ + */ +/** + * @} + */ + +/** @defgroup USBD_REQ_Exported_Variables + * @{ + */ +/** + * @} + */ + +/** @defgroup USBD_REQ_Exported_FunctionsPrototype + * @{ + */ + +USBD_StatusTypeDef USBD_StdDevReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req); +USBD_StatusTypeDef USBD_StdItfReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req); +USBD_StatusTypeDef USBD_StdEPReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req); + + +void USBD_CtlError (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req); + +void USBD_ParseSetupRequest (USBD_SetupReqTypedef *req, uint8_t *pdata); + +void USBD_GetString (uint8_t *desc, uint8_t *unicode, uint16_t *len); +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USB_REQUEST_H */ + +/** + * @} + */ + +/** +* @} +*/ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h b/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h new file mode 100644 index 0000000..969e324 --- /dev/null +++ b/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h @@ -0,0 +1,330 @@ +/** + ****************************************************************************** + * @file usbd_def.h + * @author MCD Application Team + * @version V2.4.2 + * @date 11-December-2015 + * @brief General defines for the usb device library + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2015 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USBD_DEF_H +#define __USBD_DEF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_conf.h" + +/** @addtogroup STM32_USBD_DEVICE_LIBRARY + * @{ + */ + +/** @defgroup USB_DEF + * @brief general defines for the usb device library file + * @{ + */ + +/** @defgroup USB_DEF_Exported_Defines + * @{ + */ + +#ifndef NULL +#define NULL 0 +#endif + + +#define USB_LEN_DEV_QUALIFIER_DESC 0x0A +#define USB_LEN_DEV_DESC 0x12 +#define USB_LEN_CFG_DESC 0x09 +#define USB_LEN_IF_DESC 0x09 +#define USB_LEN_EP_DESC 0x07 +#define USB_LEN_OTG_DESC 0x03 +#define USB_LEN_LANGID_STR_DESC 0x04 +#define USB_LEN_OTHER_SPEED_DESC_SIZ 0x09 + +#define USBD_IDX_LANGID_STR 0x00 +#define USBD_IDX_MFC_STR 0x01 +#define USBD_IDX_PRODUCT_STR 0x02 +#define USBD_IDX_SERIAL_STR 0x03 +#define USBD_IDX_CONFIG_STR 0x04 +#define USBD_IDX_INTERFACE_STR 0x05 + +#define USB_REQ_TYPE_STANDARD 0x00 +#define USB_REQ_TYPE_CLASS 0x20 +#define USB_REQ_TYPE_VENDOR 0x40 +#define USB_REQ_TYPE_MASK 0x60 + +#define USB_REQ_RECIPIENT_DEVICE 0x00 +#define USB_REQ_RECIPIENT_INTERFACE 0x01 +#define USB_REQ_RECIPIENT_ENDPOINT 0x02 +#define USB_REQ_RECIPIENT_MASK 0x03 + +#define USB_REQ_GET_STATUS 0x00 +#define USB_REQ_CLEAR_FEATURE 0x01 +#define USB_REQ_SET_FEATURE 0x03 +#define USB_REQ_SET_ADDRESS 0x05 +#define USB_REQ_GET_DESCRIPTOR 0x06 +#define USB_REQ_SET_DESCRIPTOR 0x07 +#define USB_REQ_GET_CONFIGURATION 0x08 +#define USB_REQ_SET_CONFIGURATION 0x09 +#define USB_REQ_GET_INTERFACE 0x0A +#define USB_REQ_SET_INTERFACE 0x0B +#define USB_REQ_SYNCH_FRAME 0x0C + +#define USB_DESC_TYPE_DEVICE 1 +#define USB_DESC_TYPE_CONFIGURATION 2 +#define USB_DESC_TYPE_STRING 3 +#define USB_DESC_TYPE_INTERFACE 4 +#define USB_DESC_TYPE_ENDPOINT 5 +#define USB_DESC_TYPE_DEVICE_QUALIFIER 6 +#define USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION 7 +#define USB_DESC_TYPE_BOS 0x0F + +#define USB_CONFIG_REMOTE_WAKEUP 2 +#define USB_CONFIG_SELF_POWERED 1 + +#define USB_FEATURE_EP_HALT 0 +#define USB_FEATURE_REMOTE_WAKEUP 1 +#define USB_FEATURE_TEST_MODE 2 + +#define USB_DEVICE_CAPABITY_TYPE 0x10 + +#define USB_HS_MAX_PACKET_SIZE 512 +#define USB_FS_MAX_PACKET_SIZE 64 +#define USB_MAX_EP0_SIZE 64 + +/* Device Status */ +#define USBD_STATE_DEFAULT 1 +#define USBD_STATE_ADDRESSED 2 +#define USBD_STATE_CONFIGURED 3 +#define USBD_STATE_SUSPENDED 4 + + +/* EP0 State */ +#define USBD_EP0_IDLE 0 +#define USBD_EP0_SETUP 1 +#define USBD_EP0_DATA_IN 2 +#define USBD_EP0_DATA_OUT 3 +#define USBD_EP0_STATUS_IN 4 +#define USBD_EP0_STATUS_OUT 5 +#define USBD_EP0_STALL 6 + +#define USBD_EP_TYPE_CTRL 0 +#define USBD_EP_TYPE_ISOC 1 +#define USBD_EP_TYPE_BULK 2 +#define USBD_EP_TYPE_INTR 3 + + +/** + * @} + */ + + +/** @defgroup USBD_DEF_Exported_TypesDefinitions + * @{ + */ + +typedef struct usb_setup_req +{ + + uint8_t bmRequest; + uint8_t bRequest; + uint16_t wValue; + uint16_t wIndex; + uint16_t wLength; +}USBD_SetupReqTypedef; + +struct _USBD_HandleTypeDef; + +typedef struct _Device_cb +{ + uint8_t (*Init) (struct _USBD_HandleTypeDef *pdev , uint8_t cfgidx); + uint8_t (*DeInit) (struct _USBD_HandleTypeDef *pdev , uint8_t cfgidx); + /* Control Endpoints*/ + uint8_t (*Setup) (struct _USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req); + uint8_t (*EP0_TxSent) (struct _USBD_HandleTypeDef *pdev ); + uint8_t (*EP0_RxReady) (struct _USBD_HandleTypeDef *pdev ); + /* Class Specific Endpoints*/ + uint8_t (*DataIn) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum); + uint8_t (*DataOut) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum); + uint8_t (*SOF) (struct _USBD_HandleTypeDef *pdev); + uint8_t (*IsoINIncomplete) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum); + uint8_t (*IsoOUTIncomplete) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum); + + uint8_t *(*GetHSConfigDescriptor)(uint16_t *length); + uint8_t *(*GetFSConfigDescriptor)(uint16_t *length); + uint8_t *(*GetOtherSpeedConfigDescriptor)(uint16_t *length); + uint8_t *(*GetDeviceQualifierDescriptor)(uint16_t *length); +#if (USBD_SUPPORT_USER_STRING == 1) + uint8_t *(*GetUsrStrDescriptor)(struct _USBD_HandleTypeDef *pdev ,uint8_t index, uint16_t *length); +#endif + +} USBD_ClassTypeDef; + +/* Following USB Device Speed */ +typedef enum +{ + USBD_SPEED_HIGH = 0, + USBD_SPEED_FULL = 1, + USBD_SPEED_LOW = 2, +}USBD_SpeedTypeDef; + +/* Following USB Device status */ +typedef enum { + USBD_OK = 0, + USBD_BUSY, + USBD_FAIL, +}USBD_StatusTypeDef; + +/* USB Device descriptors structure */ +typedef struct +{ + uint8_t *(*GetDeviceDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length); + uint8_t *(*GetLangIDStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length); + uint8_t *(*GetManufacturerStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length); + uint8_t *(*GetProductStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length); + uint8_t *(*GetSerialStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length); + uint8_t *(*GetConfigurationStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length); + uint8_t *(*GetInterfaceStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length); +#if (USBD_LPM_ENABLED == 1) + uint8_t *(*GetBOSDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length); +#endif +} USBD_DescriptorsTypeDef; + +/* USB Device handle structure */ +typedef struct +{ + uint32_t status; + uint32_t total_length; + uint32_t rem_length; + uint32_t maxpacket; +} USBD_EndpointTypeDef; + +/* USB Device handle structure */ +typedef struct _USBD_HandleTypeDef +{ + uint8_t id; + uint32_t dev_config; + uint32_t dev_default_config; + uint32_t dev_config_status; + USBD_SpeedTypeDef dev_speed; + USBD_EndpointTypeDef ep_in[15]; + USBD_EndpointTypeDef ep_out[15]; + uint32_t ep0_state; + uint32_t ep0_data_len; + uint8_t dev_state; + uint8_t dev_old_state; + uint8_t dev_address; + uint8_t dev_connection_status; + uint8_t dev_test_mode; + uint32_t dev_remote_wakeup; + + USBD_SetupReqTypedef request; + USBD_DescriptorsTypeDef *pDesc; + USBD_ClassTypeDef *pClass; + void *pClassData; + void *pUserData; + void *pData; +} USBD_HandleTypeDef; + +/** + * @} + */ + + + +/** @defgroup USBD_DEF_Exported_Macros + * @{ + */ +#define SWAPBYTE(addr) (((uint16_t)(*((uint8_t *)(addr)))) + \ + (((uint16_t)(*(((uint8_t *)(addr)) + 1))) << 8)) + +#define LOBYTE(x) ((uint8_t)(x & 0x00FF)) +#define HIBYTE(x) ((uint8_t)((x & 0xFF00) >>8)) +#define MIN(a, b) (((a) < (b)) ? (a) : (b)) +#define MAX(a, b) (((a) > (b)) ? (a) : (b)) + + +#if defined ( __GNUC__ ) + #ifndef __weak + #define __weak __attribute__((weak)) + #endif /* __weak */ + #ifndef __packed + #define __packed __attribute__((__packed__)) + #endif /* __packed */ +#endif /* __GNUC__ */ + + +/* In HS mode and when the DMA is used, all variables and data structures dealing + with the DMA during the transaction process should be 4-bytes aligned */ + +#if defined (__GNUC__) /* GNU Compiler */ + #define __ALIGN_END __attribute__ ((aligned (4))) + #define __ALIGN_BEGIN +#else + #define __ALIGN_END + #if defined (__CC_ARM) /* ARM Compiler */ + #define __ALIGN_BEGIN __align(4) + #elif defined (__ICCARM__) /* IAR Compiler */ + #define __ALIGN_BEGIN + #elif defined (__TASKING__) /* TASKING Compiler */ + #define __ALIGN_BEGIN __align(4) + #endif /* __CC_ARM */ +#endif /* __GNUC__ */ + + +/** + * @} + */ + +/** @defgroup USBD_DEF_Exported_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup USBD_DEF_Exported_FunctionsPrototype + * @{ + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USBD_DEF_H */ + +/** + * @} + */ + +/** +* @} +*/ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h b/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h new file mode 100644 index 0000000..dbf8ca1 --- /dev/null +++ b/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h @@ -0,0 +1,128 @@ +/** + ****************************************************************************** + * @file usbd_ioreq.h + * @author MCD Application Team + * @version V2.4.2 + * @date 11-December-2015 + * @brief Header file for the usbd_ioreq.c file + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2015 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USBD_IOREQ_H +#define __USBD_IOREQ_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_def.h" +#include "usbd_core.h" + +/** @addtogroup STM32_USB_DEVICE_LIBRARY + * @{ + */ + +/** @defgroup USBD_IOREQ + * @brief header file for the usbd_ioreq.c file + * @{ + */ + +/** @defgroup USBD_IOREQ_Exported_Defines + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_IOREQ_Exported_Types + * @{ + */ + + +/** + * @} + */ + + + +/** @defgroup USBD_IOREQ_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup USBD_IOREQ_Exported_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup USBD_IOREQ_Exported_FunctionsPrototype + * @{ + */ + +USBD_StatusTypeDef USBD_CtlSendData (USBD_HandleTypeDef *pdev, + uint8_t *buf, + uint16_t len); + +USBD_StatusTypeDef USBD_CtlContinueSendData (USBD_HandleTypeDef *pdev, + uint8_t *pbuf, + uint16_t len); + +USBD_StatusTypeDef USBD_CtlPrepareRx (USBD_HandleTypeDef *pdev, + uint8_t *pbuf, + uint16_t len); + +USBD_StatusTypeDef USBD_CtlContinueRx (USBD_HandleTypeDef *pdev, + uint8_t *pbuf, + uint16_t len); + +USBD_StatusTypeDef USBD_CtlSendStatus (USBD_HandleTypeDef *pdev); + +USBD_StatusTypeDef USBD_CtlReceiveStatus (USBD_HandleTypeDef *pdev); + +uint16_t USBD_GetRxCount (USBD_HandleTypeDef *pdev , + uint8_t epnum); + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USBD_IOREQ_H */ + +/** + * @} + */ + +/** +* @} +*/ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c b/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c new file mode 100644 index 0000000..86fc2de --- /dev/null +++ b/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c @@ -0,0 +1,565 @@ +/** + ****************************************************************************** + * @file usbd_core.c + * @author MCD Application Team + * @version V2.4.2 + * @date 11-December-2015 + * @brief This file provides all the USBD core functions. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2015 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_core.h" + +/** @addtogroup STM32_USBD_DEVICE_LIBRARY +* @{ +*/ + + +/** @defgroup USBD_CORE +* @brief usbd core module +* @{ +*/ + +/** @defgroup USBD_CORE_Private_TypesDefinitions +* @{ +*/ +/** +* @} +*/ + + +/** @defgroup USBD_CORE_Private_Defines +* @{ +*/ + +/** +* @} +*/ + + +/** @defgroup USBD_CORE_Private_Macros +* @{ +*/ +/** +* @} +*/ + + + + +/** @defgroup USBD_CORE_Private_FunctionPrototypes +* @{ +*/ + +/** +* @} +*/ + +/** @defgroup USBD_CORE_Private_Variables +* @{ +*/ + +/** +* @} +*/ + +/** @defgroup USBD_CORE_Private_Functions +* @{ +*/ + +/** +* @brief USBD_Init +* Initializes the device stack and load the class driver +* @param pdev: device instance +* @param pdesc: Descriptor structure address +* @param id: Low level core index +* @retval None +*/ +USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev, USBD_DescriptorsTypeDef *pdesc, uint8_t id) +{ + /* Check whether the USB Host handle is valid */ + if(pdev == NULL) + { + USBD_ErrLog("Invalid Device handle"); + return USBD_FAIL; + } + + /* Unlink previous class*/ + if(pdev->pClass != NULL) + { + pdev->pClass = NULL; + } + + /* Assign USBD Descriptors */ + if(pdesc != NULL) + { + pdev->pDesc = pdesc; + } + + /* Set Device initial State */ + pdev->dev_state = USBD_STATE_DEFAULT; + pdev->id = id; + /* Initialize low level driver */ + USBD_LL_Init(pdev); + + return USBD_OK; +} + +/** +* @brief USBD_DeInit +* Re-Initialize th device library +* @param pdev: device instance +* @retval status: status +*/ +USBD_StatusTypeDef USBD_DeInit(USBD_HandleTypeDef *pdev) +{ + /* Set Default State */ + pdev->dev_state = USBD_STATE_DEFAULT; + + /* Free Class Resources */ + pdev->pClass->DeInit(pdev, pdev->dev_config); + + /* Stop the low level driver */ + USBD_LL_Stop(pdev); + + /* Initialize low level driver */ + USBD_LL_DeInit(pdev); + + return USBD_OK; +} + + +/** + * @brief USBD_RegisterClass + * Link class driver to Device Core. + * @param pDevice : Device Handle + * @param pclass: Class handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, USBD_ClassTypeDef *pclass) +{ + USBD_StatusTypeDef status = USBD_OK; + if(pclass != 0) + { + /* link the class to the USB Device handle */ + pdev->pClass = pclass; + status = USBD_OK; + } + else + { + USBD_ErrLog("Invalid Class handle"); + status = USBD_FAIL; + } + + return status; +} + +/** + * @brief USBD_Start + * Start the USB Device Core. + * @param pdev: Device Handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_Start (USBD_HandleTypeDef *pdev) +{ + + /* Start the low level driver */ + USBD_LL_Start(pdev); + + return USBD_OK; +} + +/** + * @brief USBD_Stop + * Stop the USB Device Core. + * @param pdev: Device Handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_Stop (USBD_HandleTypeDef *pdev) +{ + /* Free Class Resources */ + pdev->pClass->DeInit(pdev, pdev->dev_config); + + /* Stop the low level driver */ + USBD_LL_Stop(pdev); + + return USBD_OK; +} + +/** +* @brief USBD_RunTestMode +* Launch test mode process +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_RunTestMode (USBD_HandleTypeDef *pdev) +{ + return USBD_OK; +} + + +/** +* @brief USBD_SetClassConfig +* Configure device and start the interface +* @param pdev: device instance +* @param cfgidx: configuration index +* @retval status +*/ + +USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx) +{ + USBD_StatusTypeDef ret = USBD_FAIL; + + if(pdev->pClass != NULL) + { + /* Set configuration and Start the Class*/ + if(pdev->pClass->Init(pdev, cfgidx) == 0) + { + ret = USBD_OK; + } + } + return ret; +} + +/** +* @brief USBD_ClrClassConfig +* Clear current configuration +* @param pdev: device instance +* @param cfgidx: configuration index +* @retval status: USBD_StatusTypeDef +*/ +USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx) +{ + /* Clear configuration and De-initialize the Class process*/ + pdev->pClass->DeInit(pdev, cfgidx); + return USBD_OK; +} + + +/** +* @brief USBD_SetupStage +* Handle the setup stage +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_LL_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup) +{ + + USBD_ParseSetupRequest(&pdev->request, psetup); + + pdev->ep0_state = USBD_EP0_SETUP; + pdev->ep0_data_len = pdev->request.wLength; + + switch (pdev->request.bmRequest & 0x1F) + { + case USB_REQ_RECIPIENT_DEVICE: + USBD_StdDevReq (pdev, &pdev->request); + break; + + case USB_REQ_RECIPIENT_INTERFACE: + USBD_StdItfReq(pdev, &pdev->request); + break; + + case USB_REQ_RECIPIENT_ENDPOINT: + USBD_StdEPReq(pdev, &pdev->request); + break; + + default: + USBD_LL_StallEP(pdev , pdev->request.bmRequest & 0x80); + break; + } + return USBD_OK; +} + +/** +* @brief USBD_DataOutStage +* Handle data OUT stage +* @param pdev: device instance +* @param epnum: endpoint index +* @retval status +*/ +USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata) +{ + USBD_EndpointTypeDef *pep; + + if(epnum == 0) + { + pep = &pdev->ep_out[0]; + + if ( pdev->ep0_state == USBD_EP0_DATA_OUT) + { + if(pep->rem_length > pep->maxpacket) + { + pep->rem_length -= pep->maxpacket; + + USBD_CtlContinueRx (pdev, + pdata, + MIN(pep->rem_length ,pep->maxpacket)); + } + else + { + if((pdev->pClass->EP0_RxReady != NULL)&& + (pdev->dev_state == USBD_STATE_CONFIGURED)) + { + pdev->pClass->EP0_RxReady(pdev); + } + USBD_CtlSendStatus(pdev); + } + } + } + else if((pdev->pClass->DataOut != NULL)&& + (pdev->dev_state == USBD_STATE_CONFIGURED)) + { + pdev->pClass->DataOut(pdev, epnum); + } + return USBD_OK; +} + +/** +* @brief USBD_DataInStage +* Handle data in stage +* @param pdev: device instance +* @param epnum: endpoint index +* @retval status +*/ +USBD_StatusTypeDef USBD_LL_DataInStage(USBD_HandleTypeDef *pdev ,uint8_t epnum, uint8_t *pdata) +{ + USBD_EndpointTypeDef *pep; + + if(epnum == 0) + { + pep = &pdev->ep_in[0]; + + if ( pdev->ep0_state == USBD_EP0_DATA_IN) + { + if(pep->rem_length > pep->maxpacket) + { + pep->rem_length -= pep->maxpacket; + + USBD_CtlContinueSendData (pdev, + pdata, + pep->rem_length); + + /* Prepare endpoint for premature end of transfer */ + USBD_LL_PrepareReceive (pdev, + 0, + NULL, + 0); + } + else + { /* last packet is MPS multiple, so send ZLP packet */ + if((pep->total_length % pep->maxpacket == 0) && + (pep->total_length >= pep->maxpacket) && + (pep->total_length < pdev->ep0_data_len )) + { + + USBD_CtlContinueSendData(pdev , NULL, 0); + pdev->ep0_data_len = 0; + + /* Prepare endpoint for premature end of transfer */ + USBD_LL_PrepareReceive (pdev, + 0, + NULL, + 0); + } + else + { + if((pdev->pClass->EP0_TxSent != NULL)&& + (pdev->dev_state == USBD_STATE_CONFIGURED)) + { + pdev->pClass->EP0_TxSent(pdev); + } + USBD_CtlReceiveStatus(pdev); + } + } + } + if (pdev->dev_test_mode == 1) + { + USBD_RunTestMode(pdev); + pdev->dev_test_mode = 0; + } + } + else if((pdev->pClass->DataIn != NULL)&& + (pdev->dev_state == USBD_STATE_CONFIGURED)) + { + pdev->pClass->DataIn(pdev, epnum); + } + return USBD_OK; +} + +/** +* @brief USBD_LL_Reset +* Handle Reset event +* @param pdev: device instance +* @retval status +*/ + +USBD_StatusTypeDef USBD_LL_Reset(USBD_HandleTypeDef *pdev) +{ + /* Open EP0 OUT */ + USBD_LL_OpenEP(pdev, + 0x00, + USBD_EP_TYPE_CTRL, + USB_MAX_EP0_SIZE); + + pdev->ep_out[0].maxpacket = USB_MAX_EP0_SIZE; + + /* Open EP0 IN */ + USBD_LL_OpenEP(pdev, + 0x80, + USBD_EP_TYPE_CTRL, + USB_MAX_EP0_SIZE); + + pdev->ep_in[0].maxpacket = USB_MAX_EP0_SIZE; + /* Upon Reset call user call back */ + pdev->dev_state = USBD_STATE_DEFAULT; + + if (pdev->pClassData) + pdev->pClass->DeInit(pdev, pdev->dev_config); + + + return USBD_OK; +} + + + + +/** +* @brief USBD_LL_Reset +* Handle Reset event +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_LL_SetSpeed(USBD_HandleTypeDef *pdev, USBD_SpeedTypeDef speed) +{ + pdev->dev_speed = speed; + return USBD_OK; +} + +/** +* @brief USBD_Suspend +* Handle Suspend event +* @param pdev: device instance +* @retval status +*/ + +USBD_StatusTypeDef USBD_LL_Suspend(USBD_HandleTypeDef *pdev) +{ + pdev->dev_old_state = pdev->dev_state; + pdev->dev_state = USBD_STATE_SUSPENDED; + return USBD_OK; +} + +/** +* @brief USBD_Resume +* Handle Resume event +* @param pdev: device instance +* @retval status +*/ + +USBD_StatusTypeDef USBD_LL_Resume(USBD_HandleTypeDef *pdev) +{ + pdev->dev_state = pdev->dev_old_state; + return USBD_OK; +} + +/** +* @brief USBD_SOF +* Handle SOF event +* @param pdev: device instance +* @retval status +*/ + +USBD_StatusTypeDef USBD_LL_SOF(USBD_HandleTypeDef *pdev) +{ + if(pdev->dev_state == USBD_STATE_CONFIGURED) + { + if(pdev->pClass->SOF != NULL) + { + pdev->pClass->SOF(pdev); + } + } + return USBD_OK; +} + +/** +* @brief USBD_IsoINIncomplete +* Handle iso in incomplete event +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_LL_IsoINIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum) +{ + return USBD_OK; +} + +/** +* @brief USBD_IsoOUTIncomplete +* Handle iso out incomplete event +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_LL_IsoOUTIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum) +{ + return USBD_OK; +} + +/** +* @brief USBD_DevConnected +* Handle device connection event +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_LL_DevConnected(USBD_HandleTypeDef *pdev) +{ + return USBD_OK; +} + +/** +* @brief USBD_DevDisconnected +* Handle device disconnection event +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_LL_DevDisconnected(USBD_HandleTypeDef *pdev) +{ + /* Free Class Resources */ + pdev->dev_state = USBD_STATE_DEFAULT; + pdev->pClass->DeInit(pdev, pdev->dev_config); + + return USBD_OK; +} +/** +* @} +*/ + + +/** +* @} +*/ + + +/** +* @} +*/ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c b/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c new file mode 100644 index 0000000..7701a6d --- /dev/null +++ b/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c @@ -0,0 +1,782 @@ +/** + ****************************************************************************** + * @file usbd_req.c + * @author MCD Application Team + * @version V2.4.2 + * @date 11-December-2015 + * @brief This file provides the standard USB requests following chapter 9. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2015 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_ctlreq.h" +#include "usbd_ioreq.h" + + +/** @addtogroup STM32_USBD_STATE_DEVICE_LIBRARY + * @{ + */ + + +/** @defgroup USBD_REQ + * @brief USB standard requests module + * @{ + */ + +/** @defgroup USBD_REQ_Private_TypesDefinitions + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_REQ_Private_Defines + * @{ + */ + +/** + * @} + */ + + +/** @defgroup USBD_REQ_Private_Macros + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_REQ_Private_Variables + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_REQ_Private_FunctionPrototypes + * @{ + */ +static void USBD_GetDescriptor(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req); + +static void USBD_SetAddress(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req); + +static void USBD_SetConfig(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req); + +static void USBD_GetConfig(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req); + +static void USBD_GetStatus(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req); + +static void USBD_SetFeature(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req); + +static void USBD_ClrFeature(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req); + +static uint8_t USBD_GetLen(uint8_t *buf); + +/** + * @} + */ + + +/** @defgroup USBD_REQ_Private_Functions + * @{ + */ + + +/** +* @brief USBD_StdDevReq +* Handle standard usb device requests +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +USBD_StatusTypeDef USBD_StdDevReq (USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req) +{ + USBD_StatusTypeDef ret = USBD_OK; + + switch (req->bRequest) + { + case USB_REQ_GET_DESCRIPTOR: + + USBD_GetDescriptor (pdev, req) ; + break; + + case USB_REQ_SET_ADDRESS: + USBD_SetAddress(pdev, req); + break; + + case USB_REQ_SET_CONFIGURATION: + USBD_SetConfig (pdev , req); + break; + + case USB_REQ_GET_CONFIGURATION: + USBD_GetConfig (pdev , req); + break; + + case USB_REQ_GET_STATUS: + USBD_GetStatus (pdev , req); + break; + + + case USB_REQ_SET_FEATURE: + USBD_SetFeature (pdev , req); + break; + + case USB_REQ_CLEAR_FEATURE: + USBD_ClrFeature (pdev , req); + break; + + default: + USBD_CtlError(pdev , req); + break; + } + + return ret; +} + +/** +* @brief USBD_StdItfReq +* Handle standard usb interface requests +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +USBD_StatusTypeDef USBD_StdItfReq (USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req) +{ + USBD_StatusTypeDef ret = USBD_OK; + + switch (pdev->dev_state) + { + case USBD_STATE_CONFIGURED: + + if (LOBYTE(req->wIndex) <= USBD_MAX_NUM_INTERFACES) + { + pdev->pClass->Setup (pdev, req); + + if((req->wLength == 0)&& (ret == USBD_OK)) + { + USBD_CtlSendStatus(pdev); + } + } + else + { + USBD_CtlError(pdev , req); + } + break; + + default: + USBD_CtlError(pdev , req); + break; + } + return USBD_OK; +} + +/** +* @brief USBD_StdEPReq +* Handle standard usb endpoint requests +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +USBD_StatusTypeDef USBD_StdEPReq (USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req) +{ + + uint8_t ep_addr; + USBD_StatusTypeDef ret = USBD_OK; + USBD_EndpointTypeDef *pep; + ep_addr = LOBYTE(req->wIndex); + + /* Check if it is a class request */ + if ((req->bmRequest & 0x60) == 0x20) + { + pdev->pClass->Setup (pdev, req); + + return USBD_OK; + } + + switch (req->bRequest) + { + + case USB_REQ_SET_FEATURE : + + switch (pdev->dev_state) + { + case USBD_STATE_ADDRESSED: + if ((ep_addr != 0x00) && (ep_addr != 0x80)) + { + USBD_LL_StallEP(pdev , ep_addr); + } + break; + + case USBD_STATE_CONFIGURED: + if (req->wValue == USB_FEATURE_EP_HALT) + { + if ((ep_addr != 0x00) && (ep_addr != 0x80)) + { + USBD_LL_StallEP(pdev , ep_addr); + + } + } + pdev->pClass->Setup (pdev, req); + USBD_CtlSendStatus(pdev); + + break; + + default: + USBD_CtlError(pdev , req); + break; + } + break; + + case USB_REQ_CLEAR_FEATURE : + + switch (pdev->dev_state) + { + case USBD_STATE_ADDRESSED: + if ((ep_addr != 0x00) && (ep_addr != 0x80)) + { + USBD_LL_StallEP(pdev , ep_addr); + } + break; + + case USBD_STATE_CONFIGURED: + if (req->wValue == USB_FEATURE_EP_HALT) + { + if ((ep_addr & 0x7F) != 0x00) + { + USBD_LL_ClearStallEP(pdev , ep_addr); + pdev->pClass->Setup (pdev, req); + } + USBD_CtlSendStatus(pdev); + } + break; + + default: + USBD_CtlError(pdev , req); + break; + } + break; + + case USB_REQ_GET_STATUS: + switch (pdev->dev_state) + { + case USBD_STATE_ADDRESSED: + if ((ep_addr & 0x7F) != 0x00) + { + USBD_LL_StallEP(pdev , ep_addr); + } + break; + + case USBD_STATE_CONFIGURED: + pep = ((ep_addr & 0x80) == 0x80) ? &pdev->ep_in[ep_addr & 0x7F]:\ + &pdev->ep_out[ep_addr & 0x7F]; + if(USBD_LL_IsStallEP(pdev, ep_addr)) + { + pep->status = 0x0001; + } + else + { + pep->status = 0x0000; + } + + USBD_CtlSendData (pdev, + (uint8_t *)&pep->status, + 2); + break; + + default: + USBD_CtlError(pdev , req); + break; + } + break; + + default: + break; + } + return ret; +} +/** +* @brief USBD_GetDescriptor +* Handle Get Descriptor requests +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +static void USBD_GetDescriptor(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req) +{ + uint16_t len; + uint8_t *pbuf; + + + switch (req->wValue >> 8) + { +#if (USBD_LPM_ENABLED == 1) + case USB_DESC_TYPE_BOS: + pbuf = pdev->pDesc->GetBOSDescriptor(pdev->dev_speed, &len); + break; +#endif + case USB_DESC_TYPE_DEVICE: + pbuf = pdev->pDesc->GetDeviceDescriptor(pdev->dev_speed, &len); + break; + + case USB_DESC_TYPE_CONFIGURATION: + if(pdev->dev_speed == USBD_SPEED_HIGH ) + { + pbuf = (uint8_t *)pdev->pClass->GetHSConfigDescriptor(&len); + pbuf[1] = USB_DESC_TYPE_CONFIGURATION; + } + else + { + pbuf = (uint8_t *)pdev->pClass->GetFSConfigDescriptor(&len); + pbuf[1] = USB_DESC_TYPE_CONFIGURATION; + } + break; + + case USB_DESC_TYPE_STRING: + switch ((uint8_t)(req->wValue)) + { + case USBD_IDX_LANGID_STR: + pbuf = pdev->pDesc->GetLangIDStrDescriptor(pdev->dev_speed, &len); + break; + + case USBD_IDX_MFC_STR: + pbuf = pdev->pDesc->GetManufacturerStrDescriptor(pdev->dev_speed, &len); + break; + + case USBD_IDX_PRODUCT_STR: + pbuf = pdev->pDesc->GetProductStrDescriptor(pdev->dev_speed, &len); + break; + + case USBD_IDX_SERIAL_STR: + pbuf = pdev->pDesc->GetSerialStrDescriptor(pdev->dev_speed, &len); + break; + + case USBD_IDX_CONFIG_STR: + pbuf = pdev->pDesc->GetConfigurationStrDescriptor(pdev->dev_speed, &len); + break; + + case USBD_IDX_INTERFACE_STR: + pbuf = pdev->pDesc->GetInterfaceStrDescriptor(pdev->dev_speed, &len); + break; + + default: +#if (USBD_SUPPORT_USER_STRING == 1) + pbuf = pdev->pClass->GetUsrStrDescriptor(pdev, (req->wValue) , &len); + break; +#else + USBD_CtlError(pdev , req); + return; +#endif + } + break; + case USB_DESC_TYPE_DEVICE_QUALIFIER: + + if(pdev->dev_speed == USBD_SPEED_HIGH ) + { + pbuf = (uint8_t *)pdev->pClass->GetDeviceQualifierDescriptor(&len); + break; + } + else + { + USBD_CtlError(pdev , req); + return; + } + + case USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION: + if(pdev->dev_speed == USBD_SPEED_HIGH ) + { + pbuf = (uint8_t *)pdev->pClass->GetOtherSpeedConfigDescriptor(&len); + pbuf[1] = USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION; + break; + } + else + { + USBD_CtlError(pdev , req); + return; + } + + default: + USBD_CtlError(pdev , req); + return; + } + + if((len != 0)&& (req->wLength != 0)) + { + + len = MIN(len , req->wLength); + + USBD_CtlSendData (pdev, + pbuf, + len); + } + +} + +/** +* @brief USBD_SetAddress +* Set device address +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +static void USBD_SetAddress(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req) +{ + uint8_t dev_addr; + + if ((req->wIndex == 0) && (req->wLength == 0)) + { + dev_addr = (uint8_t)(req->wValue) & 0x7F; + + if (pdev->dev_state == USBD_STATE_CONFIGURED) + { + USBD_CtlError(pdev , req); + } + else + { + pdev->dev_address = dev_addr; + USBD_LL_SetUSBAddress(pdev, dev_addr); + USBD_CtlSendStatus(pdev); + + if (dev_addr != 0) + { + pdev->dev_state = USBD_STATE_ADDRESSED; + } + else + { + pdev->dev_state = USBD_STATE_DEFAULT; + } + } + } + else + { + USBD_CtlError(pdev , req); + } +} + +/** +* @brief USBD_SetConfig +* Handle Set device configuration request +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +static void USBD_SetConfig(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req) +{ + + static uint8_t cfgidx; + + cfgidx = (uint8_t)(req->wValue); + + if (cfgidx > USBD_MAX_NUM_CONFIGURATION ) + { + USBD_CtlError(pdev , req); + } + else + { + switch (pdev->dev_state) + { + case USBD_STATE_ADDRESSED: + if (cfgidx) + { + pdev->dev_config = cfgidx; + pdev->dev_state = USBD_STATE_CONFIGURED; + if(USBD_SetClassConfig(pdev , cfgidx) == USBD_FAIL) + { + USBD_CtlError(pdev , req); + return; + } + USBD_CtlSendStatus(pdev); + } + else + { + USBD_CtlSendStatus(pdev); + } + break; + + case USBD_STATE_CONFIGURED: + if (cfgidx == 0) + { + pdev->dev_state = USBD_STATE_ADDRESSED; + pdev->dev_config = cfgidx; + USBD_ClrClassConfig(pdev , cfgidx); + USBD_CtlSendStatus(pdev); + + } + else if (cfgidx != pdev->dev_config) + { + /* Clear old configuration */ + USBD_ClrClassConfig(pdev , pdev->dev_config); + + /* set new configuration */ + pdev->dev_config = cfgidx; + if(USBD_SetClassConfig(pdev , cfgidx) == USBD_FAIL) + { + USBD_CtlError(pdev , req); + return; + } + USBD_CtlSendStatus(pdev); + } + else + { + USBD_CtlSendStatus(pdev); + } + break; + + default: + USBD_CtlError(pdev , req); + break; + } + } +} + +/** +* @brief USBD_GetConfig +* Handle Get device configuration request +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +static void USBD_GetConfig(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req) +{ + + if (req->wLength != 1) + { + USBD_CtlError(pdev , req); + } + else + { + switch (pdev->dev_state ) + { + case USBD_STATE_ADDRESSED: + pdev->dev_default_config = 0; + USBD_CtlSendData (pdev, + (uint8_t *)&pdev->dev_default_config, + 1); + break; + + case USBD_STATE_CONFIGURED: + + USBD_CtlSendData (pdev, + (uint8_t *)&pdev->dev_config, + 1); + break; + + default: + USBD_CtlError(pdev , req); + break; + } + } +} + +/** +* @brief USBD_GetStatus +* Handle Get Status request +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +static void USBD_GetStatus(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req) +{ + + + switch (pdev->dev_state) + { + case USBD_STATE_ADDRESSED: + case USBD_STATE_CONFIGURED: + +#if ( USBD_SELF_POWERED == 1) + pdev->dev_config_status = USB_CONFIG_SELF_POWERED; +#else + pdev->dev_config_status = 0; +#endif + + if (pdev->dev_remote_wakeup) + { + pdev->dev_config_status |= USB_CONFIG_REMOTE_WAKEUP; + } + + USBD_CtlSendData (pdev, + (uint8_t *)& pdev->dev_config_status, + 2); + break; + + default : + USBD_CtlError(pdev , req); + break; + } +} + + +/** +* @brief USBD_SetFeature +* Handle Set device feature request +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +static void USBD_SetFeature(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req) +{ + + if (req->wValue == USB_FEATURE_REMOTE_WAKEUP) + { + pdev->dev_remote_wakeup = 1; + pdev->pClass->Setup (pdev, req); + USBD_CtlSendStatus(pdev); + } + +} + + +/** +* @brief USBD_ClrFeature +* Handle clear device feature request +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +static void USBD_ClrFeature(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req) +{ + switch (pdev->dev_state) + { + case USBD_STATE_ADDRESSED: + case USBD_STATE_CONFIGURED: + if (req->wValue == USB_FEATURE_REMOTE_WAKEUP) + { + pdev->dev_remote_wakeup = 0; + pdev->pClass->Setup (pdev, req); + USBD_CtlSendStatus(pdev); + } + break; + + default : + USBD_CtlError(pdev , req); + break; + } +} + +/** +* @brief USBD_ParseSetupRequest +* Copy buffer into setup structure +* @param pdev: device instance +* @param req: usb request +* @retval None +*/ + +void USBD_ParseSetupRequest(USBD_SetupReqTypedef *req, uint8_t *pdata) +{ + req->bmRequest = *(uint8_t *) (pdata); + req->bRequest = *(uint8_t *) (pdata + 1); + req->wValue = SWAPBYTE (pdata + 2); + req->wIndex = SWAPBYTE (pdata + 4); + req->wLength = SWAPBYTE (pdata + 6); + +} + +/** +* @brief USBD_CtlError +* Handle USB low level Error +* @param pdev: device instance +* @param req: usb request +* @retval None +*/ + +void USBD_CtlError( USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req) +{ + USBD_LL_StallEP(pdev , 0x80); + USBD_LL_StallEP(pdev , 0); +} + + +/** + * @brief USBD_GetString + * Convert Ascii string into unicode one + * @param desc : descriptor buffer + * @param unicode : Formatted string buffer (unicode) + * @param len : descriptor length + * @retval None + */ +void USBD_GetString(uint8_t *desc, uint8_t *unicode, uint16_t *len) +{ + uint8_t idx = 0; + + if (desc != NULL) + { + *len = USBD_GetLen(desc) * 2 + 2; + unicode[idx++] = *len; + unicode[idx++] = USB_DESC_TYPE_STRING; + + while (*desc != '\0') + { + unicode[idx++] = *desc++; + unicode[idx++] = 0x00; + } + } +} + +/** + * @brief USBD_GetLen + * return the string length + * @param buf : pointer to the ascii string buffer + * @retval string length + */ +static uint8_t USBD_GetLen(uint8_t *buf) +{ + uint8_t len = 0; + + while (*buf != '\0') + { + len++; + buf++; + } + + return len; +} +/** + * @} + */ + + +/** + * @} + */ + + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c b/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c new file mode 100644 index 0000000..d66d777 --- /dev/null +++ b/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c @@ -0,0 +1,236 @@ +/** + ****************************************************************************** + * @file usbd_ioreq.c + * @author MCD Application Team + * @version V2.4.2 + * @date 11-December-2015 + * @brief This file provides the IO requests APIs for control endpoints. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2015 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_ioreq.h" + +/** @addtogroup STM32_USB_DEVICE_LIBRARY + * @{ + */ + + +/** @defgroup USBD_IOREQ + * @brief control I/O requests module + * @{ + */ + +/** @defgroup USBD_IOREQ_Private_TypesDefinitions + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_IOREQ_Private_Defines + * @{ + */ + +/** + * @} + */ + + +/** @defgroup USBD_IOREQ_Private_Macros + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_IOREQ_Private_Variables + * @{ + */ + +/** + * @} + */ + + +/** @defgroup USBD_IOREQ_Private_FunctionPrototypes + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_IOREQ_Private_Functions + * @{ + */ + +/** +* @brief USBD_CtlSendData +* send data on the ctl pipe +* @param pdev: device instance +* @param buff: pointer to data buffer +* @param len: length of data to be sent +* @retval status +*/ +USBD_StatusTypeDef USBD_CtlSendData (USBD_HandleTypeDef *pdev, + uint8_t *pbuf, + uint16_t len) +{ + /* Set EP0 State */ + pdev->ep0_state = USBD_EP0_DATA_IN; + pdev->ep_in[0].total_length = len; + pdev->ep_in[0].rem_length = len; + /* Start the transfer */ + USBD_LL_Transmit (pdev, 0x00, pbuf, len); + + return USBD_OK; +} + +/** +* @brief USBD_CtlContinueSendData +* continue sending data on the ctl pipe +* @param pdev: device instance +* @param buff: pointer to data buffer +* @param len: length of data to be sent +* @retval status +*/ +USBD_StatusTypeDef USBD_CtlContinueSendData (USBD_HandleTypeDef *pdev, + uint8_t *pbuf, + uint16_t len) +{ + /* Start the next transfer */ + USBD_LL_Transmit (pdev, 0x00, pbuf, len); + + return USBD_OK; +} + +/** +* @brief USBD_CtlPrepareRx +* receive data on the ctl pipe +* @param pdev: device instance +* @param buff: pointer to data buffer +* @param len: length of data to be received +* @retval status +*/ +USBD_StatusTypeDef USBD_CtlPrepareRx (USBD_HandleTypeDef *pdev, + uint8_t *pbuf, + uint16_t len) +{ + /* Set EP0 State */ + pdev->ep0_state = USBD_EP0_DATA_OUT; + pdev->ep_out[0].total_length = len; + pdev->ep_out[0].rem_length = len; + /* Start the transfer */ + USBD_LL_PrepareReceive (pdev, + 0, + pbuf, + len); + + return USBD_OK; +} + +/** +* @brief USBD_CtlContinueRx +* continue receive data on the ctl pipe +* @param pdev: device instance +* @param buff: pointer to data buffer +* @param len: length of data to be received +* @retval status +*/ +USBD_StatusTypeDef USBD_CtlContinueRx (USBD_HandleTypeDef *pdev, + uint8_t *pbuf, + uint16_t len) +{ + + USBD_LL_PrepareReceive (pdev, + 0, + pbuf, + len); + return USBD_OK; +} +/** +* @brief USBD_CtlSendStatus +* send zero lzngth packet on the ctl pipe +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_CtlSendStatus (USBD_HandleTypeDef *pdev) +{ + + /* Set EP0 State */ + pdev->ep0_state = USBD_EP0_STATUS_IN; + + /* Start the transfer */ + USBD_LL_Transmit (pdev, 0x00, NULL, 0); + + return USBD_OK; +} + +/** +* @brief USBD_CtlReceiveStatus +* receive zero lzngth packet on the ctl pipe +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_CtlReceiveStatus (USBD_HandleTypeDef *pdev) +{ + /* Set EP0 State */ + pdev->ep0_state = USBD_EP0_STATUS_OUT; + + /* Start the transfer */ + USBD_LL_PrepareReceive ( pdev, + 0, + NULL, + 0); + + return USBD_OK; +} + + +/** +* @brief USBD_GetRxCount +* returns the received data length +* @param pdev: device instance +* @param ep_addr: endpoint address +* @retval Rx Data blength +*/ +uint16_t USBD_GetRxCount (USBD_HandleTypeDef *pdev , uint8_t ep_addr) +{ + return USBD_LL_GetRxDataSize(pdev, ep_addr); +} + +/** + * @} + */ + + +/** + * @} + */ + + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit