From 2628932a40d769d8d0180ba6fed1e7b9b2718982 Mon Sep 17 00:00:00 2001 From: jaseg Date: Sun, 3 May 2020 19:53:02 +0200 Subject: minkbd: repo restructure --- .../STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_crc.h | 474 --------------------- 1 file changed, 474 deletions(-) delete mode 100644 Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_crc.h (limited to 'Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_crc.h') diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_crc.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_crc.h deleted file mode 100644 index 8b7e2da..0000000 --- a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_crc.h +++ /dev/null @@ -1,474 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f0xx_ll_crc.h - * @author MCD Application Team - * @brief Header file of CRC LL module. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F0xx_LL_CRC_H -#define STM32F0xx_LL_CRC_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f0xx.h" - -/** @addtogroup STM32F0xx_LL_Driver - * @{ - */ - -#if defined(CRC) - -/** @defgroup CRC_LL CRC - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup CRC_LL_Exported_Constants CRC Exported Constants - * @{ - */ - -#if defined(CRC_POL_POL) -/** @defgroup CRC_LL_EC_POLYLENGTH Polynomial length - * @{ - */ -#define LL_CRC_POLYLENGTH_32B 0x00000000U /*!< 32 bits Polynomial size */ -#define LL_CRC_POLYLENGTH_16B CRC_CR_POLYSIZE_0 /*!< 16 bits Polynomial size */ -#define LL_CRC_POLYLENGTH_8B CRC_CR_POLYSIZE_1 /*!< 8 bits Polynomial size */ -#define LL_CRC_POLYLENGTH_7B (CRC_CR_POLYSIZE_1 | CRC_CR_POLYSIZE_0) /*!< 7 bits Polynomial size */ -/** - * @} - */ -#endif /* CRC_POL_POL */ - -/** @defgroup CRC_LL_EC_INDATA_REVERSE Input Data Reverse - * @{ - */ -#define LL_CRC_INDATA_REVERSE_NONE 0x00000000U /*!< Input Data bit order not affected */ -#define LL_CRC_INDATA_REVERSE_BYTE CRC_CR_REV_IN_0 /*!< Input Data bit reversal done by byte */ -#define LL_CRC_INDATA_REVERSE_HALFWORD CRC_CR_REV_IN_1 /*!< Input Data bit reversal done by half-word */ -#define LL_CRC_INDATA_REVERSE_WORD (CRC_CR_REV_IN_1 | CRC_CR_REV_IN_0) /*!< Input Data bit reversal done by word */ -/** - * @} - */ - -/** @defgroup CRC_LL_EC_OUTDATA_REVERSE Output Data Reverse - * @{ - */ -#define LL_CRC_OUTDATA_REVERSE_NONE 0x00000000U /*!< Output Data bit order not affected */ -#define LL_CRC_OUTDATA_REVERSE_BIT CRC_CR_REV_OUT /*!< Output Data bit reversal done by bit */ -/** - * @} - */ - -#if defined(CRC_POL_POL) -/** @defgroup CRC_LL_EC_Default_Polynomial_Value Default CRC generating polynomial value - * @brief Normal representation of this polynomial value is - * X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + X^4 + X^2 + X + 1 . - * @{ - */ -#define LL_CRC_DEFAULT_CRC32_POLY 0x04C11DB7U /*!< Default CRC generating polynomial value */ -/** - * @} - */ -#endif /* CRC_POL_POL */ - -/** @defgroup CRC_LL_EC_Default_InitValue Default CRC computation initialization value - * @{ - */ -#define LL_CRC_DEFAULT_CRC_INITVALUE 0xFFFFFFFFU /*!< Default CRC computation initialization value */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup CRC_LL_Exported_Macros CRC Exported Macros - * @{ - */ - -/** @defgroup CRC_LL_EM_WRITE_READ Common Write and read registers Macros - * @{ - */ - -/** - * @brief Write a value in CRC register - * @param __INSTANCE__ CRC Instance - * @param __REG__ Register to be written - * @param __VALUE__ Value to be written in the register - * @retval None - */ -#define LL_CRC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, __VALUE__) - -/** - * @brief Read a value in CRC register - * @param __INSTANCE__ CRC Instance - * @param __REG__ Register to be read - * @retval Register value - */ -#define LL_CRC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) -/** - * @} - */ - -/** - * @} - */ - - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup CRC_LL_Exported_Functions CRC Exported Functions - * @{ - */ - -/** @defgroup CRC_LL_EF_Configuration CRC Configuration functions - * @{ - */ - -/** - * @brief Reset the CRC calculation unit. - * @note If Programmable Initial CRC value feature - * is available, also set the Data Register to the value stored in the - * CRC_INIT register, otherwise, reset Data Register to its default value. - * @rmtoll CR RESET LL_CRC_ResetCRCCalculationUnit - * @param CRCx CRC Instance - * @retval None - */ -__STATIC_INLINE void LL_CRC_ResetCRCCalculationUnit(CRC_TypeDef *CRCx) -{ - SET_BIT(CRCx->CR, CRC_CR_RESET); -} - -#if defined(CRC_POL_POL) -/** - * @brief Configure size of the polynomial. - * @rmtoll CR POLYSIZE LL_CRC_SetPolynomialSize - * @param CRCx CRC Instance - * @param PolySize This parameter can be one of the following values: - * @arg @ref LL_CRC_POLYLENGTH_32B - * @arg @ref LL_CRC_POLYLENGTH_16B - * @arg @ref LL_CRC_POLYLENGTH_8B - * @arg @ref LL_CRC_POLYLENGTH_7B - * @retval None - */ -__STATIC_INLINE void LL_CRC_SetPolynomialSize(CRC_TypeDef *CRCx, uint32_t PolySize) -{ - MODIFY_REG(CRCx->CR, CRC_CR_POLYSIZE, PolySize); -} - -/** - * @brief Return size of the polynomial. - * @rmtoll CR POLYSIZE LL_CRC_GetPolynomialSize - * @param CRCx CRC Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_CRC_POLYLENGTH_32B - * @arg @ref LL_CRC_POLYLENGTH_16B - * @arg @ref LL_CRC_POLYLENGTH_8B - * @arg @ref LL_CRC_POLYLENGTH_7B - */ -__STATIC_INLINE uint32_t LL_CRC_GetPolynomialSize(CRC_TypeDef *CRCx) -{ - return (uint32_t)(READ_BIT(CRCx->CR, CRC_CR_POLYSIZE)); -} -#endif /* CRC_POL_POL */ - -/** - * @brief Configure the reversal of the bit order of the input data - * @rmtoll CR REV_IN LL_CRC_SetInputDataReverseMode - * @param CRCx CRC Instance - * @param ReverseMode This parameter can be one of the following values: - * @arg @ref LL_CRC_INDATA_REVERSE_NONE - * @arg @ref LL_CRC_INDATA_REVERSE_BYTE - * @arg @ref LL_CRC_INDATA_REVERSE_HALFWORD - * @arg @ref LL_CRC_INDATA_REVERSE_WORD - * @retval None - */ -__STATIC_INLINE void LL_CRC_SetInputDataReverseMode(CRC_TypeDef *CRCx, uint32_t ReverseMode) -{ - MODIFY_REG(CRCx->CR, CRC_CR_REV_IN, ReverseMode); -} - -/** - * @brief Return type of reversal for input data bit order - * @rmtoll CR REV_IN LL_CRC_GetInputDataReverseMode - * @param CRCx CRC Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_CRC_INDATA_REVERSE_NONE - * @arg @ref LL_CRC_INDATA_REVERSE_BYTE - * @arg @ref LL_CRC_INDATA_REVERSE_HALFWORD - * @arg @ref LL_CRC_INDATA_REVERSE_WORD - */ -__STATIC_INLINE uint32_t LL_CRC_GetInputDataReverseMode(CRC_TypeDef *CRCx) -{ - return (uint32_t)(READ_BIT(CRCx->CR, CRC_CR_REV_IN)); -} - -/** - * @brief Configure the reversal of the bit order of the Output data - * @rmtoll CR REV_OUT LL_CRC_SetOutputDataReverseMode - * @param CRCx CRC Instance - * @param ReverseMode This parameter can be one of the following values: - * @arg @ref LL_CRC_OUTDATA_REVERSE_NONE - * @arg @ref LL_CRC_OUTDATA_REVERSE_BIT - * @retval None - */ -__STATIC_INLINE void LL_CRC_SetOutputDataReverseMode(CRC_TypeDef *CRCx, uint32_t ReverseMode) -{ - MODIFY_REG(CRCx->CR, CRC_CR_REV_OUT, ReverseMode); -} - -/** - * @brief Configure the reversal of the bit order of the Output data - * @rmtoll CR REV_OUT LL_CRC_GetOutputDataReverseMode - * @param CRCx CRC Instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_CRC_OUTDATA_REVERSE_NONE - * @arg @ref LL_CRC_OUTDATA_REVERSE_BIT - */ -__STATIC_INLINE uint32_t LL_CRC_GetOutputDataReverseMode(CRC_TypeDef *CRCx) -{ - return (uint32_t)(READ_BIT(CRCx->CR, CRC_CR_REV_OUT)); -} - -/** - * @brief Initialize the Programmable initial CRC value. - * @note If the CRC size is less than 32 bits, the least significant bits - * are used to write the correct value - * @note LL_CRC_DEFAULT_CRC_INITVALUE could be used as value for InitCrc parameter. - * @rmtoll INIT INIT LL_CRC_SetInitialData - * @param CRCx CRC Instance - * @param InitCrc Value to be programmed in Programmable initial CRC value register - * @retval None - */ -__STATIC_INLINE void LL_CRC_SetInitialData(CRC_TypeDef *CRCx, uint32_t InitCrc) -{ - WRITE_REG(CRCx->INIT, InitCrc); -} - -/** - * @brief Return current Initial CRC value. - * @note If the CRC size is less than 32 bits, the least significant bits - * are used to read the correct value - * @rmtoll INIT INIT LL_CRC_GetInitialData - * @param CRCx CRC Instance - * @retval Value programmed in Programmable initial CRC value register - */ -__STATIC_INLINE uint32_t LL_CRC_GetInitialData(CRC_TypeDef *CRCx) -{ - return (uint32_t)(READ_REG(CRCx->INIT)); -} - -#if defined(CRC_POL_POL) -/** - * @brief Initialize the Programmable polynomial value - * (coefficients of the polynomial to be used for CRC calculation). - * @note LL_CRC_DEFAULT_CRC32_POLY could be used as value for PolynomCoef parameter. - * @note Please check Reference Manual and existing Errata Sheets, - * regarding possible limitations for Polynomial values usage. - * For example, for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65 - * @rmtoll POL POL LL_CRC_SetPolynomialCoef - * @param CRCx CRC Instance - * @param PolynomCoef Value to be programmed in Programmable Polynomial value register - * @retval None - */ -__STATIC_INLINE void LL_CRC_SetPolynomialCoef(CRC_TypeDef *CRCx, uint32_t PolynomCoef) -{ - WRITE_REG(CRCx->POL, PolynomCoef); -} - -/** - * @brief Return current Programmable polynomial value - * @note Please check Reference Manual and existing Errata Sheets, - * regarding possible limitations for Polynomial values usage. - * For example, for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65 - * @rmtoll POL POL LL_CRC_GetPolynomialCoef - * @param CRCx CRC Instance - * @retval Value programmed in Programmable Polynomial value register - */ -__STATIC_INLINE uint32_t LL_CRC_GetPolynomialCoef(CRC_TypeDef *CRCx) -{ - return (uint32_t)(READ_REG(CRCx->POL)); -} -#endif /* CRC_POL_POL */ - -/** - * @} - */ - -/** @defgroup CRC_LL_EF_Data_Management Data_Management - * @{ - */ - -/** - * @brief Write given 32-bit data to the CRC calculator - * @rmtoll DR DR LL_CRC_FeedData32 - * @param CRCx CRC Instance - * @param InData value to be provided to CRC calculator between between Min_Data=0 and Max_Data=0xFFFFFFFF - * @retval None - */ -__STATIC_INLINE void LL_CRC_FeedData32(CRC_TypeDef *CRCx, uint32_t InData) -{ - WRITE_REG(CRCx->DR, InData); -} - -/** - * @brief Write given 16-bit data to the CRC calculator - * @rmtoll DR DR LL_CRC_FeedData16 - * @param CRCx CRC Instance - * @param InData 16 bit value to be provided to CRC calculator between between Min_Data=0 and Max_Data=0xFFFF - * @retval None - */ -__STATIC_INLINE void LL_CRC_FeedData16(CRC_TypeDef *CRCx, uint16_t InData) -{ - __IO uint16_t *pReg; - - pReg = (__IO uint16_t *)(__IO void *)(&CRCx->DR); /* Derogation MisraC2012 R.11.5 */ - *pReg = InData; -} - -/** - * @brief Write given 8-bit data to the CRC calculator - * @rmtoll DR DR LL_CRC_FeedData8 - * @param CRCx CRC Instance - * @param InData 8 bit value to be provided to CRC calculator between between Min_Data=0 and Max_Data=0xFF - * @retval None - */ -__STATIC_INLINE void LL_CRC_FeedData8(CRC_TypeDef *CRCx, uint8_t InData) -{ - *(uint8_t __IO *)(&CRCx->DR) = (uint8_t) InData; -} - -/** - * @brief Return current CRC calculation result. 32 bits value is returned. - * @rmtoll DR DR LL_CRC_ReadData32 - * @param CRCx CRC Instance - * @retval Current CRC calculation result as stored in CRC_DR register (32 bits). - */ -__STATIC_INLINE uint32_t LL_CRC_ReadData32(CRC_TypeDef *CRCx) -{ - return (uint32_t)(READ_REG(CRCx->DR)); -} - -#if defined(CRC_POL_POL) -/** - * @brief Return current CRC calculation result. 16 bits value is returned. - * @note This function is expected to be used in a 16 bits CRC polynomial size context. - * @rmtoll DR DR LL_CRC_ReadData16 - * @param CRCx CRC Instance - * @retval Current CRC calculation result as stored in CRC_DR register (16 bits). - */ -__STATIC_INLINE uint16_t LL_CRC_ReadData16(CRC_TypeDef *CRCx) -{ - return (uint16_t)READ_REG(CRCx->DR); -} - -/** - * @brief Return current CRC calculation result. 8 bits value is returned. - * @note This function is expected to be used in a 8 bits CRC polynomial size context. - * @rmtoll DR DR LL_CRC_ReadData8 - * @param CRCx CRC Instance - * @retval Current CRC calculation result as stored in CRC_DR register (8 bits). - */ -__STATIC_INLINE uint8_t LL_CRC_ReadData8(CRC_TypeDef *CRCx) -{ - return (uint8_t)READ_REG(CRCx->DR); -} - -/** - * @brief Return current CRC calculation result. 7 bits value is returned. - * @note This function is expected to be used in a 7 bits CRC polynomial size context. - * @rmtoll DR DR LL_CRC_ReadData7 - * @param CRCx CRC Instance - * @retval Current CRC calculation result as stored in CRC_DR register (7 bits). - */ -__STATIC_INLINE uint8_t LL_CRC_ReadData7(CRC_TypeDef *CRCx) -{ - return (uint8_t)(READ_REG(CRCx->DR) & 0x7FU); -} -#endif /* CRC_POL_POL */ - -/** - * @brief Return data stored in the Independent Data(IDR) register. - * @note This register can be used as a temporary storage location for one byte. - * @rmtoll IDR IDR LL_CRC_Read_IDR - * @param CRCx CRC Instance - * @retval Value stored in CRC_IDR register (General-purpose 8-bit data register). - */ -__STATIC_INLINE uint32_t LL_CRC_Read_IDR(CRC_TypeDef *CRCx) -{ - return (uint32_t)(READ_REG(CRCx->IDR)); -} - -/** - * @brief Store data in the Independent Data(IDR) register. - * @note This register can be used as a temporary storage location for one byte. - * @rmtoll IDR IDR LL_CRC_Write_IDR - * @param CRCx CRC Instance - * @param InData value to be stored in CRC_IDR register (8-bit) between Min_Data=0 and Max_Data=0xFF - * @retval None - */ -__STATIC_INLINE void LL_CRC_Write_IDR(CRC_TypeDef *CRCx, uint32_t InData) -{ - *((uint8_t __IO *)(&CRCx->IDR)) = (uint8_t) InData; -} -/** - * @} - */ - -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup CRC_LL_EF_Init Initialization and de-initialization functions - * @{ - */ - -ErrorStatus LL_CRC_DeInit(CRC_TypeDef *CRCx); - -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* defined(CRC) */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32F0xx_LL_CRC_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit