From 2628932a40d769d8d0180ba6fed1e7b9b2718982 Mon Sep 17 00:00:00 2001 From: jaseg Date: Sun, 3 May 2020 19:53:02 +0200 Subject: minkbd: repo restructure --- .../STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cec.h | 794 --------------------- 1 file changed, 794 deletions(-) delete mode 100644 Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cec.h (limited to 'Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cec.h') diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cec.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cec.h deleted file mode 100644 index 8e8cdb6..0000000 --- a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cec.h +++ /dev/null @@ -1,794 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f0xx_hal_cec.h - * @author MCD Application Team - * @brief Header file of CEC HAL module. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F0xx_HAL_CEC_H -#define STM32F0xx_HAL_CEC_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f0xx_hal_def.h" - -#if defined (CEC) - -/** @addtogroup STM32F0xx_HAL_Driver - * @{ - */ - -/** @addtogroup CEC - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup CEC_Exported_Types CEC Exported Types - * @{ - */ - -/** - * @brief CEC Init Structure definition - */ -typedef struct -{ - uint32_t SignalFreeTime; /*!< Set SFT field, specifies the Signal Free Time. - It can be one of @ref CEC_Signal_Free_Time - and belongs to the set {0,...,7} where - 0x0 is the default configuration - else means 0.5 + (SignalFreeTime - 1) nominal data bit periods */ - - uint32_t Tolerance; /*!< Set RXTOL bit, specifies the tolerance accepted on the received waveforms, - it can be a value of @ref CEC_Tolerance : it is either CEC_STANDARD_TOLERANCE - or CEC_EXTENDED_TOLERANCE */ - - uint32_t BRERxStop; /*!< Set BRESTP bit @ref CEC_BRERxStop : specifies whether or not a Bit Rising Error stops the reception. - CEC_NO_RX_STOP_ON_BRE: reception is not stopped. - CEC_RX_STOP_ON_BRE: reception is stopped. */ - - uint32_t BREErrorBitGen; /*!< Set BREGEN bit @ref CEC_BREErrorBitGen : specifies whether or not an Error-Bit is generated on the - CEC line upon Bit Rising Error detection. - CEC_BRE_ERRORBIT_NO_GENERATION: no error-bit generation. - CEC_BRE_ERRORBIT_GENERATION: error-bit generation if BRESTP is set. */ - - uint32_t LBPEErrorBitGen; /*!< Set LBPEGEN bit @ref CEC_LBPEErrorBitGen : specifies whether or not an Error-Bit is generated on the - CEC line upon Long Bit Period Error detection. - CEC_LBPE_ERRORBIT_NO_GENERATION: no error-bit generation. - CEC_LBPE_ERRORBIT_GENERATION: error-bit generation. */ - - uint32_t BroadcastMsgNoErrorBitGen; /*!< Set BRDNOGEN bit @ref CEC_BroadCastMsgErrorBitGen : allows to avoid an Error-Bit generation on the CEC line - upon an error detected on a broadcast message. - - It supersedes BREGEN and LBPEGEN bits for a broadcast message error handling. It can take two values: - - 1) CEC_BROADCASTERROR_ERRORBIT_GENERATION. - a) BRE detection: error-bit generation on the CEC line if BRESTP=CEC_RX_STOP_ON_BRE - and BREGEN=CEC_BRE_ERRORBIT_NO_GENERATION. - b) LBPE detection: error-bit generation on the CEC line - if LBPGEN=CEC_LBPE_ERRORBIT_NO_GENERATION. - - 2) CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION. - no error-bit generation in case neither a) nor b) are satisfied. Additionally, - there is no error-bit generation in case of Short Bit Period Error detection in - a broadcast message while LSTN bit is set. */ - - uint32_t SignalFreeTimeOption; /*!< Set SFTOP bit @ref CEC_SFT_Option : specifies when SFT timer starts. - CEC_SFT_START_ON_TXSOM SFT: timer starts when TXSOM is set by software. - CEC_SFT_START_ON_TX_RX_END: SFT timer starts automatically at the end of message transmission/reception. */ - - uint32_t ListenMode; /*!< Set LSTN bit @ref CEC_Listening_Mode : specifies device listening mode. It can take two values: - - CEC_REDUCED_LISTENING_MODE: CEC peripheral receives only message addressed to its - own address (OAR). Messages addressed to different destination are ignored. - Broadcast messages are always received. - - CEC_FULL_LISTENING_MODE: CEC peripheral receives messages addressed to its own - address (OAR) with positive acknowledge. Messages addressed to different destination - are received, but without interfering with the CEC bus: no acknowledge sent. */ - - uint16_t OwnAddress; /*!< Own addresses configuration - This parameter can be a value of @ref CEC_OWN_ADDRESS */ - - uint8_t *RxBuffer; /*!< CEC Rx buffer pointeur */ - - -} CEC_InitTypeDef; - -/** - * @brief HAL CEC State definition - * @note HAL CEC State value is a combination of 2 different substates: gState and RxState (see @ref CEC_State_Definition). - * - gState contains CEC state information related to global Handle management - * and also information related to Tx operations. - * gState value coding follow below described bitmap : - * b7 (not used) - * x : Should be set to 0 - * b6 Error information - * 0 : No Error - * 1 : Error - * b5 IP initilisation status - * 0 : Reset (IP not initialized) - * 1 : Init done (IP initialized. HAL CEC Init function already called) - * b4-b3 (not used) - * xx : Should be set to 00 - * b2 Intrinsic process state - * 0 : Ready - * 1 : Busy (IP busy with some configuration or internal operations) - * b1 (not used) - * x : Should be set to 0 - * b0 Tx state - * 0 : Ready (no Tx operation ongoing) - * 1 : Busy (Tx operation ongoing) - * - RxState contains information related to Rx operations. - * RxState value coding follow below described bitmap : - * b7-b6 (not used) - * xx : Should be set to 00 - * b5 IP initilisation status - * 0 : Reset (IP not initialized) - * 1 : Init done (IP initialized) - * b4-b2 (not used) - * xxx : Should be set to 000 - * b1 Rx state - * 0 : Ready (no Rx operation ongoing) - * 1 : Busy (Rx operation ongoing) - * b0 (not used) - * x : Should be set to 0. - */ -typedef uint32_t HAL_CEC_StateTypeDef; - -/** - * @brief CEC handle Structure definition - */ -#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) -typedef struct __CEC_HandleTypeDef -#else -typedef struct -#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ -{ - CEC_TypeDef *Instance; /*!< CEC registers base address */ - - CEC_InitTypeDef Init; /*!< CEC communication parameters */ - - uint8_t *pTxBuffPtr; /*!< Pointer to CEC Tx transfer Buffer */ - - uint16_t TxXferCount; /*!< CEC Tx Transfer Counter */ - - uint16_t RxXferSize; /*!< CEC Rx Transfer size, 0: header received only */ - - HAL_LockTypeDef Lock; /*!< Locking object */ - - HAL_CEC_StateTypeDef gState; /*!< CEC state information related to global Handle management - and also related to Tx operations. - This parameter can be a value of @ref HAL_CEC_StateTypeDef */ - - HAL_CEC_StateTypeDef RxState; /*!< CEC state information related to Rx operations. - This parameter can be a value of @ref HAL_CEC_StateTypeDef */ - - uint32_t ErrorCode; /*!< For errors handling purposes, copy of ISR register - in case error is reported */ - -#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) - void (* TxCpltCallback)(struct __CEC_HandleTypeDef - *hcec); /*!< CEC Tx Transfer completed callback */ - void (* RxCpltCallback)(struct __CEC_HandleTypeDef *hcec, - uint32_t RxFrameSize); /*!< CEC Rx Transfer completed callback */ - void (* ErrorCallback)(struct __CEC_HandleTypeDef *hcec); /*!< CEC error callback */ - - void (* MspInitCallback)(struct __CEC_HandleTypeDef *hcec); /*!< CEC Msp Init callback */ - void (* MspDeInitCallback)(struct __CEC_HandleTypeDef *hcec); /*!< CEC Msp DeInit callback */ - -#endif /* (USE_HAL_CEC_REGISTER_CALLBACKS) */ -} CEC_HandleTypeDef; - -#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) -/** - * @brief HAL CEC Callback ID enumeration definition - */ -typedef enum -{ - HAL_CEC_TX_CPLT_CB_ID = 0x00U, /*!< CEC Tx Transfer completed callback ID */ - HAL_CEC_RX_CPLT_CB_ID = 0x01U, /*!< CEC Rx Transfer completed callback ID */ - HAL_CEC_ERROR_CB_ID = 0x02U, /*!< CEC error callback ID */ - HAL_CEC_MSPINIT_CB_ID = 0x03U, /*!< CEC Msp Init callback ID */ - HAL_CEC_MSPDEINIT_CB_ID = 0x04U /*!< CEC Msp DeInit callback ID */ -} HAL_CEC_CallbackIDTypeDef; - -/** - * @brief HAL CEC Callback pointer definition - */ -typedef void (*pCEC_CallbackTypeDef)(CEC_HandleTypeDef *hcec); /*!< pointer to an CEC callback function */ -typedef void (*pCEC_RxCallbackTypeDef)(CEC_HandleTypeDef *hcec, - uint32_t RxFrameSize); /*!< pointer to an Rx Transfer completed callback function */ -#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup CEC_Exported_Constants CEC Exported Constants - * @{ - */ -/** @defgroup CEC_State_Definition CEC State Code Definition - * @{ - */ -#define HAL_CEC_STATE_RESET ((uint32_t)0x00000000) /*!< Peripheral is not yet Initialized - Value is allowed for gState and RxState */ -#define HAL_CEC_STATE_READY ((uint32_t)0x00000020) /*!< Peripheral Initialized and ready for use - Value is allowed for gState and RxState */ -#define HAL_CEC_STATE_BUSY ((uint32_t)0x00000024) /*!< an internal process is ongoing - Value is allowed for gState only */ -#define HAL_CEC_STATE_BUSY_RX ((uint32_t)0x00000022) /*!< Data Reception process is ongoing - Value is allowed for RxState only */ -#define HAL_CEC_STATE_BUSY_TX ((uint32_t)0x00000021) /*!< Data Transmission process is ongoing - Value is allowed for gState only */ -#define HAL_CEC_STATE_BUSY_RX_TX ((uint32_t)0x00000023) /*!< an internal process is ongoing - Value is allowed for gState only */ -#define HAL_CEC_STATE_ERROR ((uint32_t)0x00000050) /*!< Error Value is allowed for gState only */ -/** - * @} - */ -/** @defgroup CEC_Error_Code CEC Error Code - * @{ - */ -#define HAL_CEC_ERROR_NONE (uint32_t) 0x0000U /*!< no error */ -#define HAL_CEC_ERROR_RXOVR CEC_ISR_RXOVR /*!< CEC Rx-Overrun */ -#define HAL_CEC_ERROR_BRE CEC_ISR_BRE /*!< CEC Rx Bit Rising Error */ -#define HAL_CEC_ERROR_SBPE CEC_ISR_SBPE /*!< CEC Rx Short Bit period Error */ -#define HAL_CEC_ERROR_LBPE CEC_ISR_LBPE /*!< CEC Rx Long Bit period Error */ -#define HAL_CEC_ERROR_RXACKE CEC_ISR_RXACKE /*!< CEC Rx Missing Acknowledge */ -#define HAL_CEC_ERROR_ARBLST CEC_ISR_ARBLST /*!< CEC Arbitration Lost */ -#define HAL_CEC_ERROR_TXUDR CEC_ISR_TXUDR /*!< CEC Tx-Buffer Underrun */ -#define HAL_CEC_ERROR_TXERR CEC_ISR_TXERR /*!< CEC Tx-Error */ -#define HAL_CEC_ERROR_TXACKE CEC_ISR_TXACKE /*!< CEC Tx Missing Acknowledge */ -#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) -#define HAL_CEC_ERROR_INVALID_CALLBACK ((uint32_t)0x00002000U) /*!< Invalid Callback Error */ -#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @defgroup CEC_Signal_Free_Time CEC Signal Free Time setting parameter - * @{ - */ -#define CEC_DEFAULT_SFT ((uint32_t)0x00000000U) -#define CEC_0_5_BITPERIOD_SFT ((uint32_t)0x00000001U) -#define CEC_1_5_BITPERIOD_SFT ((uint32_t)0x00000002U) -#define CEC_2_5_BITPERIOD_SFT ((uint32_t)0x00000003U) -#define CEC_3_5_BITPERIOD_SFT ((uint32_t)0x00000004U) -#define CEC_4_5_BITPERIOD_SFT ((uint32_t)0x00000005U) -#define CEC_5_5_BITPERIOD_SFT ((uint32_t)0x00000006U) -#define CEC_6_5_BITPERIOD_SFT ((uint32_t)0x00000007U) -/** - * @} - */ - -/** @defgroup CEC_Tolerance CEC Receiver Tolerance - * @{ - */ -#define CEC_STANDARD_TOLERANCE ((uint32_t)0x00000000U) -#define CEC_EXTENDED_TOLERANCE ((uint32_t)CEC_CFGR_RXTOL) -/** - * @} - */ - -/** @defgroup CEC_BRERxStop CEC Reception Stop on Error - * @{ - */ -#define CEC_NO_RX_STOP_ON_BRE ((uint32_t)0x00000000U) -#define CEC_RX_STOP_ON_BRE ((uint32_t)CEC_CFGR_BRESTP) -/** - * @} - */ - -/** @defgroup CEC_BREErrorBitGen CEC Error Bit Generation if Bit Rise Error reported - * @{ - */ -#define CEC_BRE_ERRORBIT_NO_GENERATION ((uint32_t)0x00000000U) -#define CEC_BRE_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_BREGEN) -/** - * @} - */ - -/** @defgroup CEC_LBPEErrorBitGen CEC Error Bit Generation if Long Bit Period Error reported - * @{ - */ -#define CEC_LBPE_ERRORBIT_NO_GENERATION ((uint32_t)0x00000000U) -#define CEC_LBPE_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_LBPEGEN) -/** - * @} - */ - -/** @defgroup CEC_BroadCastMsgErrorBitGen CEC Error Bit Generation on Broadcast message - * @{ - */ -#define CEC_BROADCASTERROR_ERRORBIT_GENERATION ((uint32_t)0x00000000U) -#define CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_BRDNOGEN) -/** - * @} - */ - -/** @defgroup CEC_SFT_Option CEC Signal Free Time start option - * @{ - */ -#define CEC_SFT_START_ON_TXSOM ((uint32_t)0x00000000U) -#define CEC_SFT_START_ON_TX_RX_END ((uint32_t)CEC_CFGR_SFTOPT) -/** - * @} - */ - -/** @defgroup CEC_Listening_Mode CEC Listening mode option - * @{ - */ -#define CEC_REDUCED_LISTENING_MODE ((uint32_t)0x00000000U) -#define CEC_FULL_LISTENING_MODE ((uint32_t)CEC_CFGR_LSTN) -/** - * @} - */ - -/** @defgroup CEC_OAR_Position CEC Device Own Address position in CEC CFGR register - * @{ - */ -#define CEC_CFGR_OAR_LSB_POS ((uint32_t) 16U) -/** - * @} - */ - -/** @defgroup CEC_Initiator_Position CEC Initiator logical address position in message header - * @{ - */ -#define CEC_INITIATOR_LSB_POS ((uint32_t) 4U) -/** - * @} - */ - -/** @defgroup CEC_OWN_ADDRESS CEC Own Address - * @{ - */ -#define CEC_OWN_ADDRESS_NONE ((uint16_t) 0x0000U) /* Reset value */ -#define CEC_OWN_ADDRESS_0 ((uint16_t) 0x0001U) /* Logical Address 0 */ -#define CEC_OWN_ADDRESS_1 ((uint16_t) 0x0002U) /* Logical Address 1 */ -#define CEC_OWN_ADDRESS_2 ((uint16_t) 0x0004U) /* Logical Address 2 */ -#define CEC_OWN_ADDRESS_3 ((uint16_t) 0x0008U) /* Logical Address 3 */ -#define CEC_OWN_ADDRESS_4 ((uint16_t) 0x0010U) /* Logical Address 4 */ -#define CEC_OWN_ADDRESS_5 ((uint16_t) 0x0020U) /* Logical Address 5 */ -#define CEC_OWN_ADDRESS_6 ((uint16_t) 0x0040U) /* Logical Address 6 */ -#define CEC_OWN_ADDRESS_7 ((uint16_t) 0x0080U) /* Logical Address 7 */ -#define CEC_OWN_ADDRESS_8 ((uint16_t) 0x0100U) /* Logical Address 9 */ -#define CEC_OWN_ADDRESS_9 ((uint16_t) 0x0200U) /* Logical Address 10 */ -#define CEC_OWN_ADDRESS_10 ((uint16_t) 0x0400U) /* Logical Address 11 */ -#define CEC_OWN_ADDRESS_11 ((uint16_t) 0x0800U) /* Logical Address 12 */ -#define CEC_OWN_ADDRESS_12 ((uint16_t) 0x1000U) /* Logical Address 13 */ -#define CEC_OWN_ADDRESS_13 ((uint16_t) 0x2000U) /* Logical Address 14 */ -#define CEC_OWN_ADDRESS_14 ((uint16_t) 0x4000U) /* Logical Address 15 */ -/** - * @} - */ - -/** @defgroup CEC_Interrupts_Definitions CEC Interrupts definition - * @{ - */ -#define CEC_IT_TXACKE CEC_IER_TXACKEIE -#define CEC_IT_TXERR CEC_IER_TXERRIE -#define CEC_IT_TXUDR CEC_IER_TXUDRIE -#define CEC_IT_TXEND CEC_IER_TXENDIE -#define CEC_IT_TXBR CEC_IER_TXBRIE -#define CEC_IT_ARBLST CEC_IER_ARBLSTIE -#define CEC_IT_RXACKE CEC_IER_RXACKEIE -#define CEC_IT_LBPE CEC_IER_LBPEIE -#define CEC_IT_SBPE CEC_IER_SBPEIE -#define CEC_IT_BRE CEC_IER_BREIE -#define CEC_IT_RXOVR CEC_IER_RXOVRIE -#define CEC_IT_RXEND CEC_IER_RXENDIE -#define CEC_IT_RXBR CEC_IER_RXBRIE -/** - * @} - */ - -/** @defgroup CEC_Flags_Definitions CEC Flags definition - * @{ - */ -#define CEC_FLAG_TXACKE CEC_ISR_TXACKE -#define CEC_FLAG_TXERR CEC_ISR_TXERR -#define CEC_FLAG_TXUDR CEC_ISR_TXUDR -#define CEC_FLAG_TXEND CEC_ISR_TXEND -#define CEC_FLAG_TXBR CEC_ISR_TXBR -#define CEC_FLAG_ARBLST CEC_ISR_ARBLST -#define CEC_FLAG_RXACKE CEC_ISR_RXACKE -#define CEC_FLAG_LBPE CEC_ISR_LBPE -#define CEC_FLAG_SBPE CEC_ISR_SBPE -#define CEC_FLAG_BRE CEC_ISR_BRE -#define CEC_FLAG_RXOVR CEC_ISR_RXOVR -#define CEC_FLAG_RXEND CEC_ISR_RXEND -#define CEC_FLAG_RXBR CEC_ISR_RXBR -/** - * @} - */ - -/** @defgroup CEC_ALL_ERROR CEC all RX or TX errors flags - * @{ - */ -#define CEC_ISR_ALL_ERROR ((uint32_t)CEC_ISR_RXOVR|CEC_ISR_BRE|CEC_ISR_SBPE|CEC_ISR_LBPE|CEC_ISR_RXACKE|\ - CEC_ISR_ARBLST|CEC_ISR_TXUDR|CEC_ISR_TXERR|CEC_ISR_TXACKE) -/** - * @} - */ - -/** @defgroup CEC_IER_ALL_RX CEC all RX errors interrupts enabling flag - * @{ - */ -#define CEC_IER_RX_ALL_ERR ((uint32_t)CEC_IER_RXACKEIE|CEC_IER_LBPEIE|CEC_IER_SBPEIE|CEC_IER_BREIE|CEC_IER_RXOVRIE) -/** - * @} - */ - -/** @defgroup CEC_IER_ALL_TX CEC all TX errors interrupts enabling flag - * @{ - */ -#define CEC_IER_TX_ALL_ERR ((uint32_t)CEC_IER_TXACKEIE|CEC_IER_TXERRIE|CEC_IER_TXUDRIE|CEC_IER_ARBLSTIE) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup CEC_Exported_Macros CEC Exported Macros - * @{ - */ - -/** @brief Reset CEC handle gstate & RxState - * @param __HANDLE__ CEC handle. - * @retval None - */ -#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) -#define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) do{ \ - (__HANDLE__)->gState = HAL_CEC_STATE_RESET; \ - (__HANDLE__)->RxState = HAL_CEC_STATE_RESET; \ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - } while(0) -#else -#define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) do{ \ - (__HANDLE__)->gState = HAL_CEC_STATE_RESET; \ - (__HANDLE__)->RxState = HAL_CEC_STATE_RESET; \ - } while(0) -#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ -/** @brief Checks whether or not the specified CEC interrupt flag is set. - * @param __HANDLE__ specifies the CEC Handle. - * @param __FLAG__ specifies the flag to check. - * @arg CEC_FLAG_TXACKE: Tx Missing acknowledge Error - * @arg CEC_FLAG_TXERR: Tx Error. - * @arg CEC_FLAG_TXUDR: Tx-Buffer Underrun. - * @arg CEC_FLAG_TXEND: End of transmission (successful transmission of the last byte). - * @arg CEC_FLAG_TXBR: Tx-Byte Request. - * @arg CEC_FLAG_ARBLST: Arbitration Lost - * @arg CEC_FLAG_RXACKE: Rx-Missing Acknowledge - * @arg CEC_FLAG_LBPE: Rx Long period Error - * @arg CEC_FLAG_SBPE: Rx Short period Error - * @arg CEC_FLAG_BRE: Rx Bit Rising Error - * @arg CEC_FLAG_RXOVR: Rx Overrun. - * @arg CEC_FLAG_RXEND: End Of Reception. - * @arg CEC_FLAG_RXBR: Rx-Byte Received. - * @retval ITStatus - */ -#define __HAL_CEC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__)) - -/** @brief Clears the interrupt or status flag when raised (write at 1) - * @param __HANDLE__ specifies the CEC Handle. - * @param __FLAG__ specifies the interrupt/status flag to clear. - * This parameter can be one of the following values: - * @arg CEC_FLAG_TXACKE: Tx Missing acknowledge Error - * @arg CEC_FLAG_TXERR: Tx Error. - * @arg CEC_FLAG_TXUDR: Tx-Buffer Underrun. - * @arg CEC_FLAG_TXEND: End of transmission (successful transmission of the last byte). - * @arg CEC_FLAG_TXBR: Tx-Byte Request. - * @arg CEC_FLAG_ARBLST: Arbitration Lost - * @arg CEC_FLAG_RXACKE: Rx-Missing Acknowledge - * @arg CEC_FLAG_LBPE: Rx Long period Error - * @arg CEC_FLAG_SBPE: Rx Short period Error - * @arg CEC_FLAG_BRE: Rx Bit Rising Error - * @arg CEC_FLAG_RXOVR: Rx Overrun. - * @arg CEC_FLAG_RXEND: End Of Reception. - * @arg CEC_FLAG_RXBR: Rx-Byte Received. - * @retval none - */ -#define __HAL_CEC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR |= (__FLAG__)) - -/** @brief Enables the specified CEC interrupt. - * @param __HANDLE__ specifies the CEC Handle. - * @param __INTERRUPT__ specifies the CEC interrupt to enable. - * This parameter can be one of the following values: - * @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable - * @arg CEC_IT_TXERR: Tx Error IT Enable - * @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable - * @arg CEC_IT_TXEND: End of transmission IT Enable - * @arg CEC_IT_TXBR: Tx-Byte Request IT Enable - * @arg CEC_IT_ARBLST: Arbitration Lost IT Enable - * @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable - * @arg CEC_IT_LBPE: Rx Long period Error IT Enable - * @arg CEC_IT_SBPE: Rx Short period Error IT Enable - * @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable - * @arg CEC_IT_RXOVR: Rx Overrun IT Enable - * @arg CEC_IT_RXEND: End Of Reception IT Enable - * @arg CEC_IT_RXBR: Rx-Byte Received IT Enable - * @retval none - */ -#define __HAL_CEC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__)) - -/** @brief Disables the specified CEC interrupt. - * @param __HANDLE__ specifies the CEC Handle. - * @param __INTERRUPT__ specifies the CEC interrupt to disable. - * This parameter can be one of the following values: - * @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable - * @arg CEC_IT_TXERR: Tx Error IT Enable - * @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable - * @arg CEC_IT_TXEND: End of transmission IT Enable - * @arg CEC_IT_TXBR: Tx-Byte Request IT Enable - * @arg CEC_IT_ARBLST: Arbitration Lost IT Enable - * @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable - * @arg CEC_IT_LBPE: Rx Long period Error IT Enable - * @arg CEC_IT_SBPE: Rx Short period Error IT Enable - * @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable - * @arg CEC_IT_RXOVR: Rx Overrun IT Enable - * @arg CEC_IT_RXEND: End Of Reception IT Enable - * @arg CEC_IT_RXBR: Rx-Byte Received IT Enable - * @retval none - */ -#define __HAL_CEC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (~(__INTERRUPT__))) - -/** @brief Checks whether or not the specified CEC interrupt is enabled. - * @param __HANDLE__ specifies the CEC Handle. - * @param __INTERRUPT__ specifies the CEC interrupt to check. - * This parameter can be one of the following values: - * @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable - * @arg CEC_IT_TXERR: Tx Error IT Enable - * @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable - * @arg CEC_IT_TXEND: End of transmission IT Enable - * @arg CEC_IT_TXBR: Tx-Byte Request IT Enable - * @arg CEC_IT_ARBLST: Arbitration Lost IT Enable - * @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable - * @arg CEC_IT_LBPE: Rx Long period Error IT Enable - * @arg CEC_IT_SBPE: Rx Short period Error IT Enable - * @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable - * @arg CEC_IT_RXOVR: Rx Overrun IT Enable - * @arg CEC_IT_RXEND: End Of Reception IT Enable - * @arg CEC_IT_RXBR: Rx-Byte Received IT Enable - * @retval FlagStatus - */ -#define __HAL_CEC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER & (__INTERRUPT__)) - -/** @brief Enables the CEC device - * @param __HANDLE__ specifies the CEC Handle. - * @retval none - */ -#define __HAL_CEC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_CECEN) - -/** @brief Disables the CEC device - * @param __HANDLE__ specifies the CEC Handle. - * @retval none - */ -#define __HAL_CEC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~CEC_CR_CECEN) - -/** @brief Set Transmission Start flag - * @param __HANDLE__ specifies the CEC Handle. - * @retval none - */ -#define __HAL_CEC_FIRST_BYTE_TX_SET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_TXSOM) - -/** @brief Set Transmission End flag - * @param __HANDLE__ specifies the CEC Handle. - * @retval none - * If the CEC message consists of only one byte, TXEOM must be set before of TXSOM. - */ -#define __HAL_CEC_LAST_BYTE_TX_SET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_TXEOM) - -/** @brief Get Transmission Start flag - * @param __HANDLE__ specifies the CEC Handle. - * @retval FlagStatus - */ -#define __HAL_CEC_GET_TRANSMISSION_START_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXSOM) - -/** @brief Get Transmission End flag - * @param __HANDLE__ specifies the CEC Handle. - * @retval FlagStatus - */ -#define __HAL_CEC_GET_TRANSMISSION_END_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXEOM) - -/** @brief Clear OAR register - * @param __HANDLE__ specifies the CEC Handle. - * @retval none - */ -#define __HAL_CEC_CLEAR_OAR(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CFGR, CEC_CFGR_OAR) - -/** @brief Set OAR register (without resetting previously set address in case of multi-address mode) - * To reset OAR, __HAL_CEC_CLEAR_OAR() needs to be called beforehand - * @param __HANDLE__ specifies the CEC Handle. - * @param __ADDRESS__ Own Address value (CEC logical address is identified by bit position) - * @retval none - */ -#define __HAL_CEC_SET_OAR(__HANDLE__,__ADDRESS__) SET_BIT((__HANDLE__)->Instance->CFGR, (__ADDRESS__)<< CEC_CFGR_OAR_LSB_POS) - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup CEC_Exported_Functions - * @{ - */ - -/** @addtogroup CEC_Exported_Functions_Group1 - * @{ - */ -/* Initialization and de-initialization functions ****************************/ -HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec); -HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec); -HAL_StatusTypeDef HAL_CEC_SetDeviceAddress(CEC_HandleTypeDef *hcec, uint16_t CEC_OwnAddress); -void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec); -void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec); - -#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) -HAL_StatusTypeDef HAL_CEC_RegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID, - pCEC_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_CEC_UnRegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID); - -HAL_StatusTypeDef HAL_CEC_RegisterRxCpltCallback(CEC_HandleTypeDef *hcec, pCEC_RxCallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_CEC_UnRegisterRxCpltCallback(CEC_HandleTypeDef *hcec); -#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @addtogroup CEC_Exported_Functions_Group2 - * @{ - */ -/* I/O operation functions ***************************************************/ -HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t InitiatorAddress, uint8_t DestinationAddress, - uint8_t *pData, uint32_t Size); -uint32_t HAL_CEC_GetLastReceivedFrameSize(CEC_HandleTypeDef *hcec); -void HAL_CEC_ChangeRxBuffer(CEC_HandleTypeDef *hcec, uint8_t *Rxbuffer); -void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec); -void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec); -void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec, uint32_t RxFrameSize); -void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec); -/** - * @} - */ - -/** @addtogroup CEC_Exported_Functions_Group3 - * @{ - */ -/* Peripheral State functions ************************************************/ -HAL_CEC_StateTypeDef HAL_CEC_GetState(CEC_HandleTypeDef *hcec); -uint32_t HAL_CEC_GetError(CEC_HandleTypeDef *hcec); -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/** @defgroup CEC_Private_Types CEC Private Types - * @{ - */ - -/** - * @} - */ - -/* Private variables ---------------------------------------------------------*/ -/** @defgroup CEC_Private_Variables CEC Private Variables - * @{ - */ - -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup CEC_Private_Constants CEC Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup CEC_Private_Macros CEC Private Macros - * @{ - */ - -#define IS_CEC_SIGNALFREETIME(__SFT__) ((__SFT__) <= CEC_CFGR_SFT) - -#define IS_CEC_TOLERANCE(__RXTOL__) (((__RXTOL__) == CEC_STANDARD_TOLERANCE) || \ - ((__RXTOL__) == CEC_EXTENDED_TOLERANCE)) - -#define IS_CEC_BRERXSTOP(__BRERXSTOP__) (((__BRERXSTOP__) == CEC_NO_RX_STOP_ON_BRE) || \ - ((__BRERXSTOP__) == CEC_RX_STOP_ON_BRE)) - -#define IS_CEC_BREERRORBITGEN(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_BRE_ERRORBIT_NO_GENERATION) || \ - ((__ERRORBITGEN__) == CEC_BRE_ERRORBIT_GENERATION)) - -#define IS_CEC_LBPEERRORBITGEN(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_LBPE_ERRORBIT_NO_GENERATION) || \ - ((__ERRORBITGEN__) == CEC_LBPE_ERRORBIT_GENERATION)) - -#define IS_CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_BROADCASTERROR_ERRORBIT_GENERATION) || \ - ((__ERRORBITGEN__) == CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION)) - -#define IS_CEC_SFTOP(__SFTOP__) (((__SFTOP__) == CEC_SFT_START_ON_TXSOM) || \ - ((__SFTOP__) == CEC_SFT_START_ON_TX_RX_END)) - -#define IS_CEC_LISTENING_MODE(__MODE__) (((__MODE__) == CEC_REDUCED_LISTENING_MODE) || \ - ((__MODE__) == CEC_FULL_LISTENING_MODE)) - -/** @brief Check CEC message size. - * The message size is the payload size: without counting the header, - * it varies from 0 byte (ping operation, one header only, no payload) to - * 15 bytes (1 opcode and up to 14 operands following the header). - * @param __SIZE__ CEC message size. - * @retval Test result (TRUE or FALSE). - */ -#define IS_CEC_MSGSIZE(__SIZE__) ((__SIZE__) <= 0x10U) - -/** @brief Check CEC device Own Address Register (OAR) setting. - * OAR address is written in a 15-bit field within CEC_CFGR register. - * @param __ADDRESS__ CEC own address. - * @retval Test result (TRUE or FALSE). - */ -#define IS_CEC_OWN_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0x7FFFU) - -/** @brief Check CEC initiator or destination logical address setting. - * Initiator and destination addresses are coded over 4 bits. - * @param __ADDRESS__ CEC initiator or logical address. - * @retval Test result (TRUE or FALSE). - */ -#define IS_CEC_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0xFU) -/** - * @} - */ -/* Private functions ---------------------------------------------------------*/ -/** @defgroup CEC_Private_Functions CEC Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* CEC */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32F0xxHAL_CEC_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit